target/linux/lantiq/base-files/etc/board.d/02_network

   1 #!/bin/sh
   2 #
   3 # Copyright (C) 2011-2015 OpenWrt.org
   4 #
   5
   6 . /lib/functions/uci-defaults.sh
   7 . /lib/functions/system.sh
   8 . /lib/functions/lantiq.sh
   9
  10 board_config_update
  11
  12 vpi=1
  13 vci=32
  14 annex="a"
  15 encaps="llc"
  16 payload="bridged"
  17 lan_mac=""
  18 wan_mac=""
  19 interface_wan=""
  20
  21 board=$(lantiq_board_name)
  22
  23 case "$board" in
  24 ACMP252|GIGASX76X)
  25         ucidef_add_switch "switch0" \
  26                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  27         ;;
  28
  29 ARV4510PW)
  30         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  31         wan_mac=$(macaddr_add "$lan_mac" 1)
  32         ucidef_add_switch "switch0" \
  33                 "0:lan:4" "2:lan:2" "1:lan:3" "3:lan:1" "5t@eth0"
  34         ;;
  35
  36 ARV4519PW|ARV7510PW22|ARV7518PW|ARV752DPW22|ARV8539PW22)
  37         ucidef_add_switch "switch0" \
  38                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
  39         ;;
  40
  41 ARV4520PW)
  42         ucidef_add_switch "switch0" \
  43                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
  44         ;;
  45
  46 ARV7506PW11)
  47         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
  48         ucidef_add_switch "switch0" \
  49                 "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5t@eth0"
  50         ;;
  51
  52 ARV7519PW)
  53         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 1)
  54         ucidef_add_switch "switch0" \
  55                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
  56         ;;
  57
  58 ARV7519RW22)
  59         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 22)" 1)
  60         ucidef_add_switch "switch0" \
  61                 "0:lan:5" "2:lan:3" "3:lan:4" "4:lan:1" "5:lan:2" "6t@eth0"
  62         ;;
  63
  64 BTHOMEHUBV2B)
  65         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  66         wan_mac=$(macaddr_add "$lan_mac" 1)
  67         ucidef_add_switch "switch0" \
  68                 "1:lan" "2:lan" "3:lan" "4:lan" "5t@eth0"
  69         ;;
  70
  71 BTHOMEHUBV3A)
  72         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  73         wan_mac=$(macaddr_add "$lan_mac" 1)
  74         ucidef_set_interface_lan 'eth0'
  75         ;;
  76
  77 BTHOMEHUBV5A)
  78         lan_mac=$(mtd_get_mac_binary_ubi caldata 4364)
  79         wan_mac=$(macaddr_add "$lan_mac" 1)
  80         ucidef_add_switch "switch0" \
  81                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
  82         ;;
  83
  84 DGN3500*)
  85         ucidef_add_switch "switch0" \
  86                 "0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5t@eth0"
  87         ;;
  88
  89 EASY80920NAND|EASY80920NOR)
  90         lan_mac=$(mtd_get_mac_ascii uboot_env ethaddr)
  91         wan_mac=$(macaddr_add "$lan_mac" 1)
  92         ucidef_add_switch "switch0" \
  93                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "5:wan:5" "6t@eth0"
  94         ;;
  95
  96 FRITZ7360SL)
  97         ucidef_add_switch "switch0" \
  98                 "0:lan:3" "1:lan:4" "2:lan:2" "4:lan:1" "6t@eth0"
  99         ;;
 100
 101 H201L)
 102         ucidef_add_switch "switch0" \
 103                 "0:lan" "1:lan" "2:lan" "3:lan" "4t@eth0"
 104         ;;
 105
 106 P2601HNFX)
 107         ucidef_add_switch "switch0" \
 108                 "0:lan" "1:lan" "2:lan" "3:lan" "5t@eth0"
 109         ;;
 110
 111 P2812HNUF*)
 112         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 113         wan_mac=$(macaddr_add "$lan_mac" 1)
 114         ucidef_add_switch "switch0" \
 115                 "0:lan" "1:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 116         ;;
 117
 118 TDW8970|TDW8980)
 119         wan_mac=$(macaddr_add "$(mtd_get_mac_binary boardconfig 61696)" 1)
 120         ucidef_add_switch "switch0" \
 121                 "0:lan:2" "2:lan:3" "4:lan:4" "5:lan:1" "6t@eth0"
 122         ;;
 123
 124 VG3503J)
 125         lan_mac=$(mtd_get_mac_ascii uboot-env ethaddr)
 126         wan_mac=$(macaddr_add "$lan_mac" 1)
 127         ucidef_add_switch "switch0" \
 128                 "2:lan:1" "4:lan:2" "6t@eth0"
 129         ;;
 130
 131 VR200v)
 132         wan_mac=$(macaddr_add "$(mtd_get_mac_binary romfile 61696)" 1)
 133         ucidef_add_switch "switch0" \
 134                 "0:lan" "2:lan" "4:lan" "5:lan" "6t@eth0"
 135         ;;
 136
 137 VGV7510KW22*)
 138         wan_mac=$(macaddr_add "$(mtd_get_mac_binary board_config 22)" 2)
 139         ucidef_add_switch "switch0" \
 140                 "2:lan:2" "3:lan:1" "4:lan:4" "5:lan:3" "6t@eth0"
 141         ;;
 142
 143 VGV7519*)
 144         wan_mac=$(mtd_get_mac_binary board_config 22)
 145         ucidef_add_switch "switch0" \
 146                 "0:lan:4" "1:lan:3" "2:lan:2" "4:lan:1" "6t@eth0"
 147         ;;
 148
 149 WBMR)
 150         ucidef_add_switch "switch0" \
 151                 "0t@eth0" "2:lan" "3:lan" "4:lan" "5:lan"
 152         ;;
 153
 154 WBMR300)
 155         lan_mac=$(mtd_get_mac_ascii ubootconfig ethaddr)
 156         wan_mac="$lan_mac"
 157         ucidef_add_switch "switch0" \
 158                 "5:lan:2" "2:lan:3" "3:lan:4" "4:wan:1" "6t@eth0"
 159         ;;
 160
 161 *)
 162         ucidef_set_interface_lan 'eth0'
 163         ;;
 164
 165 esac
 166
 167 if [ -n "$(ls /lib/modules/`uname -r`/ltq_atm*)" ]; then
 168         ucidef_add_atm_bridge "$vpi" "$vci" "$encaps" "$payload"
 169 fi
 170
 171 if lantiq_is_vdsl_system; then
 172         interface_wan="ptm0"
 173         ucidef_add_vdsl_modem "$annex" "av" "ptm"
 174 else
 175         interface_wan="nas0"
 176         ucidef_add_adsl_modem "$annex" "/lib/firmware/adsl.bin"
 177 fi
 178
 179 ucidef_set_interface_wan "$interface_wan" "pppoe"
 180
 181 [ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
 182 [ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" "$wan_mac"
 183
 184 board_config_flush
 185
 186 exit 0
 187