target/linux/ramips/dts/3G150B.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "3G150B", "ralink,rt5350-soc";
   9         model = "Tenda 3G150B";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 ap {
  15                         label = "3g150b:blue:ap";
  16                         gpios = <&gpio0 7 1>;
  17                 };
  18
  19                 3g {
  20                         label = "3g150b:blue:3g";
  21                         gpios = <&gpio0 14 1>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29                 poll-interval = <20>;
  30
  31                 reset {
  32                         label = "reset";
  33                         gpios = <&gpio0 0 1>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36         };
  37
  38         gpio_export {
  39                 compatible = "gpio-export";
  40                 #size-cells = <0>;
  41
  42                 usb {
  43                         gpio-export,name = "usb";
  44                         gpio-export,output = <1>;
  45                         gpios = <&gpio0 13 0>;
  46                 };
  47         };
  48 };
  49
  50 &spi0 {
  51         status = "okay";
  52
  53         m25p80@0 {
  54                 #address-cells = <1>;
  55                 #size-cells = <1>;
  56                 compatible = "jedec,spi-nor";
  57                 reg = <0>;
  58                 linux,modalias = "m25p80", "s25fl064k";
  59                 spi-max-frequency = <10000000>;
  60
  61                 partition@0 {
  62                         label = "u-boot";
  63                         reg = <0x0 0x30000>;
  64                         read-only;
  65                 };
  66
  67                 partition@30000 {
  68                         label = "u-boot-env";
  69                         reg = <0x30000 0x10000>;
  70                         read-only;
  71                 };
  72
  73                 factory: partition@40000 {
  74                         label = "factory";
  75                         reg = <0x40000 0x10000>;
  76                         read-only;
  77                 };
  78
  79                 partition@50000 {
  80                         label = "firmware";
  81                         reg = <0x50000 0x3b0000>;
  82                 };
  83         };
  84 };
  85
  86 &gpio1 {
  87         status = "okay";
  88 };
  89
  90 &pinctrl {
  91         state_default: pinctrl0 {
  92                 gpio {
  93                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf", "led";
  94                         ralink,function = "gpio";
  95                 };
  96         };
  97 };
  98
  99 &ethernet {
 100         mtd-mac-address = <&factory 0x4>;
 101 };
 102
 103 &esw {
 104         mediatek,portmap = <0x2f>;
 105 };
 106
 107 &wmac {
 108         ralink,mtd-eeprom = <&factory 0>;
 109         ralink,led-polarity = <1>;
 110 };
 111
 112 &ehci {
 113         status = "okay";
 114 };
 115
 116 &ohci {
 117         status = "okay";
 118 };