target/linux/ramips/dts/DCS-930.dts

   1 /dts-v1/;
   2
   3 /include/ "rt3050.dtsi"
   4
   5 / {
   6         compatible = "DCS-930", "ralink,rt3050-soc";
   7         model = "D-Link DCS-930";
   8
   9         pinctrl {
  10                 state_default: pinctrl0 {
  11                         gpio {
  12                                 ralink,group = "i2c", "spi", "jtag", "mdio", "rgmii", "uartf";
  13                                 ralink,function = "gpio";
  14                         };
  15                 };
  16         };
  17
  18         cfi@1f000000 {
  19                 compatible = "cfi-flash";
  20                 reg = <0x1f000000 0x400000>;
  21
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24                 #address-cells = <1>;
  25                 #size-cells = <1>;
  26
  27                 partition@0 {
  28                         label = "u-boot";
  29                         reg = <0x0 0x30000>;
  30                         read-only;
  31                 };
  32
  33                 partition@30000 {
  34                         label = "u-boot-env";
  35                         reg = <0x30000 0x10000>;
  36                         read-only;
  37                 };
  38
  39                 factory: partition@40000 {
  40                         label = "factory";
  41                         reg = <0x40000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 partition@50000 {
  46                         label = "firmware";
  47                         reg = <0x50000 0x3b0000>;
  48                 };
  49         };
  50
  51         gpio-leds {
  52                 compatible = "gpio-leds";
  53                 wifi {
  54                         label = "d-link:red:alert";
  55                         gpios = <&gpio0 8 1>;
  56                 };
  57                 power {
  58                         label = "d-link:green:status";
  59                         gpios = <&gpio0 9 1>;
  60                 };
  61                 wps {
  62                         label = "d-link:blue:wps";
  63                         gpios = <&gpio0 13 1>;
  64                 };
  65         };
  66
  67         gpio-keys-polled {
  68                 compatible = "gpio-keys-polled";
  69                 #address-cells = <1>;
  70                 #size-cells = <0>;
  71                 poll-interval = <20>;
  72
  73                 wps {
  74                         label = "wps";
  75                         gpios = <&gpio0 0 1>;
  76                         linux,code = <0x101>;
  77                 };
  78                 reset {
  79                         label = "reset";
  80                         gpios = <&gpio0 10 1>;
  81                         linux,code = <0x198>;
  82                 };
  83         };
  84
  85         esw@10110000 {
  86                 ralink,portmap = <0x2f>;
  87
  88                 port@0 {
  89                         compatible = "swconfig,port";
  90                         swconfig,segment = "lan";
  91                         swconfig,portmap = <0 4>;
  92                 };
  93                 port@1 {
  94                         compatible = "swconfig,port";
  95                         swconfig,segment = "lan";
  96                         swconfig,portmap = <1 3>;
  97                 };
  98                 port@2 {
  99                         compatible = "swconfig,port";
 100                         swconfig,segment = "lan";
 101                         swconfig,portmap = <2 2>;
 102                 };
 103                 port@3 {
 104                         compatible = "swconfig,port";
 105                         swconfig,segment = "lan";
 106                         swconfig,portmap = <3 1>;
 107                 };
 108                 port@4 {
 109                         compatible = "swconfig,port";
 110                         swconfig,segment = "wan";
 111                         swconfig,portmap = <4 0>;
 112                 };
 113         };
 114
 115         otg@101c0000 {
 116                 status = "okay";
 117         };
 118 };