target/linux/ramips/dts/DIR-620-D1.dts

   1 /dts-v1/;
   2
   3 #include "rt3352.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "DIR-620-D1", "ralink,rt3352-soc";
   9         model = "D-Link DIR-620 D1";
  10
  11         gpio-leds {
  12                 compatible = "gpio-leds";
  13
  14                 status {
  15                         label = "dir-620-d1:green:status";
  16                         gpios = <&gpio0 9 1>;
  17                 };
  18
  19                 wifi {
  20                         label = "dir-620-d1:green:wifi";
  21                         gpios = <&gpio0 17 1>;
  22                 };
  23         };
  24
  25         gpio-keys-polled {
  26                 compatible = "gpio-keys-polled";
  27                 #address-cells = <1>;
  28                 #size-cells = <0>;
  29                 poll-interval = <20>;
  30
  31                 reset_wps {
  32                         label = "reset_wps";
  33                         gpios = <&gpio0 7 1>;
  34                         linux,code = <KEY_RESTART>;
  35                 };
  36         };
  37 };
  38
  39 &spi0 {
  40         status = "okay";
  41
  42         m25p80@0 {
  43                 #address-cells = <1>;
  44                 #size-cells = <1>;
  45                 compatible = "jedec,spi-nor";
  46                 reg = <0>;
  47                 spi-max-frequency = <10000000>;
  48
  49                 partition@0 {
  50                         label = "u-boot";
  51                         reg = <0x0 0x30000>;
  52                         read-only;
  53                 };
  54
  55                 partition@30000 {
  56                         label = "u-boot-env";
  57                         reg = <0x30000 0x10000>;
  58                         read-only;
  59                 };
  60
  61                 factory: partition@40000 {
  62                         label = "factory";
  63                         reg = <0x40000 0x10000>;
  64                         read-only;
  65                 };
  66
  67                 partition@50000 {
  68                         label = "firmware";
  69                         reg = <0x50000 0x7b0000>;
  70                 };
  71         };
  72 };
  73
  74 &pinctrl {
  75         state_default: pinctrl0 {
  76                 gpio {
  77                         ralink,group = "i2c", "jtag", "uartf";
  78                         ralink,function = "gpio";
  79                 };
  80
  81                 rgmii {
  82                         ralink,group = "rgmii";
  83                         ralink,function = "rgmii";
  84                 };
  85
  86                 mdio {
  87                         ralink,group = "mdio";
  88                         ralink,function = "mdio";
  89                 };
  90         };
  91 };
  92
  93 &ethernet {
  94         mtd-mac-address = <&factory 0x4>;
  95 };
  96
  97 &esw {
  98         mediatek,portmap = <0x2f>;
  99 };
 100
 101 &wmac {
 102         ralink,mtd-eeprom = <&factory 0>;
 103 };
 104
 105 &ehci {
 106         status = "okay";
 107 };
 108
 109 &ohci {
 110         status = "okay";
 111 };