target/linux/ramips/dts/E1700.dts

   1 /*
   2  * Device Tree file for the Linksys E1700
   3  *
   4  * Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
   5  *
   6  * This file is licensed under the terms of the GNU General Public
   7  * License version 2.  This program is licensed "as is" without any
   8  * warranty of any kind, whether express or implied.
   9  */
  10
  11 /dts-v1/;
  12
  13 /include/ "mt7620a.dtsi"
  14
  15 / {
  16         compatible = "linksys,e1700", "ralink,mt7620a-soc";
  17         model = "Linksys E1700";
  18
  19         palmbus@10000000 {
  20                 spi@b00 {
  21                         status = "okay";
  22
  23                         m25p80@0 {
  24                                 #address-cells = <1>;
  25                                 #size-cells = <1>;
  26                                 compatible = "mx25l6405d";
  27                                 reg = <0 0>;
  28                                 linux,modalias = "m25p80", "mx25l6405d";
  29                                 spi-max-frequency = <10000000>;
  30
  31                                 partition@0 {
  32                                         label = "u-boot";
  33                                         reg = <0x0 0x30000>;
  34                                         read-only;
  35                                 };
  36
  37                                 partition@30000 {
  38                                         label = "config";
  39                                         reg = <0x30000 0x10000>;
  40                                         read-only;
  41                                 };
  42
  43                                 factory: partition@40000 {
  44                                         label = "factory";
  45                                         reg = <0x40000 0x10000>;
  46                                         read-only;
  47                                 };
  48
  49                                 partition@50000 {
  50                                         label = "firmware";
  51                                         reg = <0x50000 0x7b0000>;
  52                                 };
  53                         };
  54                 };
  55         };
  56
  57         pinctrl {
  58                 state_default: pinctrl0 {
  59                         gpio {
  60                                 ralink,group = "i2c", "uartf";
  61                                 ralink,function = "gpio";
  62                         };
  63                 };
  64         };
  65
  66         ethernet@10100000 {
  67                 status = "okay";
  68
  69                 mtd-mac-address = <&factory 0x28>;
  70
  71                 pinctrl-names = "default";
  72                 pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  73
  74                 port@5 {
  75                         status = "okay";
  76                         ralink,fixed-link = <1000 1 1 1>;
  77                         phy-mode = "rgmii";
  78                 };
  79
  80                 mdio-bus {
  81                         status = "okay";
  82
  83                         phy0: ethernet-phy@0 {
  84                                 reg = <0>;
  85                                 phy-mode = "rgmii";
  86                         };
  87                         phy1: ethernet-phy@1 {
  88                                 reg = <1>;
  89                                 phy-mode = "rgmii";
  90                         };
  91                         phy2: ethernet-phy@2 {
  92                                 reg = <2>;
  93                                 phy-mode = "rgmii";
  94                         };
  95                         phy3: ethernet-phy@3 {
  96                                 reg = <3>;
  97                                 phy-mode = "rgmii";
  98                         };
  99                         phy4: ethernet-phy@4 {
 100                                 reg = <4>;
 101                                 phy-mode = "rgmii";
 102                         };
 103                         phy1f: ethernet-phy@1f {
 104                                 reg = <0x1f>;
 105                                 phy-mode = "rgmii";
 106                         };
 107                 };
 108         };
 109
 110         gsw@10110000 {
 111                 ralink,port4 = "gmac";
 112                 mediatek,mt7530 = <1>;
 113         };
 114
 115         wmac@10180000 {
 116                 ralink,mtd-eeprom = <&factory 0>;
 117         };
 118
 119         gpio-keys-polled {
 120                 compatible = "gpio-keys-polled";
 121                 #address-cells = <1>;
 122                 #size-cells = <0>;
 123                 poll-interval = <20>;
 124                 reset {
 125                         label = "reset";
 126                         gpios = <&gpio0 1 0>;
 127                         linux,code = <0x198>;
 128                 };
 129                 wps {
 130                         label = "wps";
 131                         gpios = <&gpio0 2 0>;
 132                         linux,code = <0x211>;
 133                 };
 134         };
 135
 136         gpio-leds {
 137                 compatible = "gpio-leds";
 138                 power {
 139                         label = "linksys:green:power";
 140                         gpios = <&gpio0 10 1>;
 141                 };
 142                 wan {
 143                         label = "linksys:green:wps";
 144                         gpios = <&gpio0 12 1>;
 145                 };
 146         };
 147 };