ralink: improve r43200
[openwrt/staging/chunkeey.git] / target / linux / ramips / dts / MT7620a_MT7530.dts
1 /dts-v1/;
2
3 /include/ "mt7620a.dtsi"
4
5 / {
6 compatible = "ralink,mt7620a-eval-board", "ralink,mt7620a-soc";
7 model = "Ralink MT7620a + MT7530 evaluation board";
8
9 palmbus@10000000 {
10 spi@b00 {
11 status = "okay";
12
13 m25p80@0 {
14 #address-cells = <1>;
15 #size-cells = <1>;
16 compatible = "s25fl064k";
17 reg = <0 0>;
18 linux,modalias = "m25p80", "s25fl064k";
19 spi-max-frequency = <10000000>;
20
21 partition@0 {
22 label = "u-boot";
23 reg = <0x0 0x30000>;
24 read-only;
25 };
26
27 partition@30000 {
28 label = "u-boot-env";
29 reg = <0x30000 0x10000>;
30 read-only;
31 };
32
33 factory: partition@40000 {
34 label = "factory";
35 reg = <0x40000 0x10000>;
36 read-only;
37 };
38
39 partition@50000 {
40 label = "firmware";
41 reg = <0x50000 0x7b0000>;
42 };
43 };
44 };
45 };
46
47 pinctrl {
48 state_default: pinctrl0 {
49 gpio {
50 ralink,group = "i2c", "uartf";
51 ralink,function = "gpio";
52 };
53 };
54 };
55
56 ethernet@10100000 {
57 status = "okay";
58
59 pinctrl-names = "default";
60 pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
61
62 ralink,port-map = "llllw";
63
64 port@5 {
65 status = "okay";
66 ralink,fixed-link = <1000 1 1 1>;
67 phy-mode = "rgmii";
68 };
69
70 mdio-bus {
71 status = "okay";
72
73 phy0: ethernet-phy@0 {
74 reg = <0>;
75 phy-mode = "rgmii";
76 };
77 phy1: ethernet-phy@1 {
78 reg = <1>;
79 phy-mode = "rgmii";
80 };
81 phy2: ethernet-phy@2 {
82 reg = <2>;
83 phy-mode = "rgmii";
84 };
85 phy3: ethernet-phy@3 {
86 reg = <3>;
87 phy-mode = "rgmii";
88 };
89 phy4: ethernet-phy@4 {
90 reg = <4>;
91 phy-mode = "rgmii";
92 };
93 phy1f: ethernet-phy@1f {
94 reg = <0x1f>;
95 phy-mode = "rgmii";
96 };
97 };
98 };
99
100 gsw@10110000 {
101 ralink,port4 = "gmac";
102 mediatek,mt7530 = <1>;
103 };
104
105 pcie@10140000 {
106 status = "okay";
107 };
108
109 ehci@101c0000 {
110 status = "okay";
111 };
112
113 ohci@101c1000 {
114 status = "okay";
115 };
116 };