target/linux/sunxi/patches-4.9/0081-ARM-dts-sun8i-nanopi-neo-enable-UART-USB-and-I2C-pin.patch

   1 From e036def69972b9db9d2695f45cbf4e84c707b3c5 Mon Sep 17 00:00:00 2001
   2 From: Daniel Golle <daniel@makrotopia.org>
   3 Date: Fri, 23 Dec 2016 07:28:51 +0100
   4 Subject: [PATCH] ARM: dts: sun8i: nanopi-neo: enable UART, USB and I2C pins
   5
   6 ---
   7  arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts | 43 ++++++++++++++++++++++++++++---
   8  1 file changed, 40 insertions(+), 3 deletions(-)
   9
  10 --- a/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
  11 +++ b/arch/arm/boot/dts/sun8i-h3-nanopi-neo.dts
  12 @@ -78,10 +78,30 @@
  13         };
  14  };
  15
  16 +&ehci1 {
  17 +       status = "okay";
  18 +};
  19 +
  20 +&ohci1 {
  21 +       status = "okay";
  22 +};
  23 +
  24 +&ehci2 {
  25 +       status = "okay";
  26 +};
  27 +
  28 +&ohci2 {
  29 +       status = "okay";
  30 +};
  31 +
  32  &ehci3 {
  33         status = "okay";
  34  };
  35
  36 +&ohci3 {
  37 +       status = "okay";
  38 +};
  39 +
  40  &emac {
  41         phy-handle = <&int_mii_phy>;
  42         phy-mode = "mii";
  43 @@ -99,9 +119,6 @@
  44         status = "okay";
  45  };
  46
  47 -&ohci3 {
  48 -       status = "okay";
  49 -};
  50
  51  &pio {
  52         leds_opc: led-pins {
  53 @@ -127,7 +144,27 @@
  54         status = "okay";
  55  };
  56
  57 +&uart1 {
  58 +       pinctrl-names = "default";
  59 +       pinctrl-0 = <&uart1_pins>;
  60 +       status = "okay";
  61 +};
  62 +
  63 +&uart2 {
  64 +       pinctrl-names = "default";
  65 +       pinctrl-0 = <&uart2_pins>;
  66 +       status = "okay";
  67 +};
  68 +
  69  &usbphy {
  70         /* USB VBUS is always on */
  71         status = "okay";
  72  };
  73 +
  74 +&i2c0 {
  75 +       status = "okay";
  76 +};
  77 +
  78 +&i2c1 {
  79 +       status = "okay";
  80 +};