-# Copyright (C) 2006-2014 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
+# SPDX-License-Identifier: GPL-2.0-only
#
+# Copyright (C) 2006-2014 OpenWrt.org
+
+config KERNEL_BUILD_USER
+ string "Custom Kernel Build User Name"
+ default "builder" if BUILDBOT
+ default ""
+ help
+ Sets the Kernel build user string, which for example will be returned
+ by 'uname -a' on running systems.
+ If not set, uses system user at build time.
+
+config KERNEL_BUILD_DOMAIN
+ string "Custom Kernel Build Domain Name"
+ default "buildhost" if BUILDBOT
+ default ""
+ help
+ Sets the Kernel build domain string, which for example will be
+ returned by 'uname -a' on running systems.
+ If not set, uses system hostname at build time.
config KERNEL_PRINTK
bool "Enable support for printk"
default y
-config KERNEL_CRASHLOG
- bool "Crash logging"
- depends on !(arm || powerpc || sparc || TARGET_uml)
- default y
-
config KERNEL_SWAP
bool "Support for paging of anonymous memory (swap)"
- default y
+ default y if !SMALL_FLASH
+
+config KERNEL_PROC_STRIPPED
+ bool "Strip non-essential /proc functionality to reduce code size"
+ default y if SMALL_FLASH
config KERNEL_DEBUG_FS
bool "Compile the kernel with debug filesystem enabled"
write to these files. Many common debugging facilities, such as
ftrace, require the existence of debugfs.
-config KERNEL_PERF_EVENTS
+config KERNEL_MIPS_FP_SUPPORT
bool
+ default y if TARGET_pistachio
+
+config KERNEL_ARM_PMU
+ bool
+ default n
+ depends on (arm || aarch64)
+
+config KERNEL_X86_VSYSCALL_EMULATION
+ bool "Enable vsyscall emulation"
+ default n
+ depends on x86_64
+ help
+ This enables emulation of the legacy vsyscall page. Disabling
+ it is roughly equivalent to booting with vsyscall=none, except
+ that it will also disable the helpful warning if a program
+ tries to use a vsyscall. With this option set to N, offending
+ programs will just segfault, citing addresses of the form
+ 0xffffffffff600?00.
+
+ This option is required by many programs built before 2013, and
+ care should be used even with newer programs if set to N.
+
+ Disabling this option saves about 7K of kernel size and
+ possibly 4K of additional runtime pagetable memory.
+
+config KERNEL_PERF_EVENTS
+ bool "Compile the kernel with performance events and counters"
default n
+ select KERNEL_ARM_PMU if (arm || aarch64)
config KERNEL_PROFILING
bool "Compile the kernel with profiling enabled"
Enable the extended profiling support mechanisms used by profilers such
as OProfile.
+config KERNEL_RPI_AXIPERF
+ bool "Compile the kernel with RaspberryPi AXI Performance monitors"
+ default y
+ depends on KERNEL_PERF_EVENTS && TARGET_bcm27xx
+
+config KERNEL_UBSAN
+ bool "Compile the kernel with undefined behaviour sanity checker"
+ help
+ This option enables undefined behaviour sanity checker
+ Compile-time instrumentation is used to detect various undefined
+ behaviours in runtime. Various types of checks may be enabled
+ via boot parameter ubsan_handle
+ (see: Documentation/dev-tools/ubsan.rst).
+
+config KERNEL_UBSAN_SANITIZE_ALL
+ bool "Enable instrumentation for the entire kernel"
+ depends on KERNEL_UBSAN
+ default y
+ help
+ This option activates instrumentation for the entire kernel.
+ If you don't enable this option, you have to explicitly specify
+ UBSAN_SANITIZE := y for the files/directories you want to check for UB.
+ Enabling this option will get kernel image size increased
+ significantly.
+
+config KERNEL_UBSAN_ALIGNMENT
+ bool "Enable checking of pointers alignment"
+ depends on KERNEL_UBSAN
+ help
+ This option enables detection of unaligned memory accesses.
+ Enabling this option on architectures that support unaligned
+ accesses may produce a lot of false positives.
+
+config KERNEL_UBSAN_BOUNDS
+ bool "Perform array index bounds checking"
+ depends on KERNEL_UBSAN
+ help
+ This option enables detection of directly indexed out of bounds array
+ accesses, where the array size is known at compile time. Note that
+ this does not protect array overflows via bad calls to the
+ {str,mem}*cpy() family of functions (that is addressed by
+ FORTIFY_SOURCE).
+
+config KERNEL_UBSAN_NULL
+ bool "Enable checking of null pointers"
+ depends on KERNEL_UBSAN
+ help
+ This option enables detection of memory accesses via a
+ null pointer.
+
+config KERNEL_UBSAN_TRAP
+ bool "On Sanitizer warnings, abort the running kernel code"
+ depends on KERNEL_UBSAN
+ help
+ Building kernels with Sanitizer features enabled tends to grow the
+ kernel size by around 5%, due to adding all the debugging text on
+ failure paths. To avoid this, Sanitizer instrumentation can just
+ issue a trap. This reduces the kernel size overhead but turns all
+ warnings (including potentially harmless conditions) into full
+ exceptions that abort the running kernel code (regardless of context,
+ locks held, etc), which may destabilize the system. For some system
+ builders this is an acceptable trade-off.
+
+config KERNEL_KASAN
+ bool "Compile the kernel with KASan: runtime memory debugger"
+ select KERNEL_SLUB_DEBUG
+ depends on (x86_64 || aarch64)
+ help
+ Enables kernel address sanitizer - runtime memory debugger,
+ designed to find out-of-bounds accesses and use-after-free bugs.
+ This is strictly a debugging feature and it requires a gcc version
+ of 4.9.2 or later. Detection of out of bounds accesses to stack or
+ global variables requires gcc 5.0 or later.
+ This feature consumes about 1/8 of available memory and brings about
+ ~x3 performance slowdown.
+ For better error detection enable CONFIG_STACKTRACE.
+ Currently CONFIG_KASAN doesn't work with CONFIG_DEBUG_SLAB
+ (the resulting kernel does not boot).
+
+config KERNEL_KASAN_EXTRA
+ bool "KAsan: extra checks"
+ depends on KERNEL_KASAN && KERNEL_DEBUG_KERNEL
+ help
+ This enables further checks in the kernel address sanitizer, for now
+ it only includes the address-use-after-scope check that can lead
+ to excessive kernel stack usage, frame size warnings and longer
+ compile time.
+ https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81715 has more
+
+config KERNEL_KASAN_VMALLOC
+ bool "Back mappings in vmalloc space with real shadow memory"
+ depends on KERNEL_KASAN
+ help
+ By default, the shadow region for vmalloc space is the read-only
+ zero page. This means that KASAN cannot detect errors involving
+ vmalloc space.
+
+ Enabling this option will hook in to vmap/vmalloc and back those
+ mappings with real shadow memory allocated on demand. This allows
+ for KASAN to detect more sorts of errors (and to support vmapped
+ stacks), but at the cost of higher memory usage.
+
+ This option depends on HAVE_ARCH_KASAN_VMALLOC, but we can't
+ depend on that in here, so it is possible that enabling this
+ will have no effect.
+
+if KERNEL_KASAN
+ config KERNEL_KASAN_GENERIC
+ def_bool y
+
+ config KERNEL_KASAN_SW_TAGS
+ def_bool n
+endif
+
+choice
+ prompt "Instrumentation type"
+ depends on KERNEL_KASAN
+ default KERNEL_KASAN_OUTLINE
+
+config KERNEL_KASAN_OUTLINE
+ bool "Outline instrumentation"
+ help
+ Before every memory access compiler insert function call
+ __asan_load*/__asan_store*. These functions performs check
+ of shadow memory. This is slower than inline instrumentation,
+ however it doesn't bloat size of kernel's .text section so
+ much as inline does.
+
+config KERNEL_KASAN_INLINE
+ bool "Inline instrumentation"
+ help
+ Compiler directly inserts code checking shadow memory before
+ memory accesses. This is faster than outline (in some workloads
+ it gives about x2 boost over outline instrumentation), but
+ make kernel's .text size much bigger.
+ This requires a gcc version of 5.0 or later.
+
+endchoice
+
+config KERNEL_KCOV
+ bool "Compile the kernel with code coverage for fuzzing"
+ select KERNEL_DEBUG_FS
+ help
+ KCOV exposes kernel code coverage information in a form suitable
+ for coverage-guided fuzzing (randomized testing).
+
+ If RANDOMIZE_BASE is enabled, PC values will not be stable across
+ different machines and across reboots. If you need stable PC values,
+ disable RANDOMIZE_BASE.
+
+ For more details, see Documentation/kcov.txt.
+
+config KERNEL_KCOV_ENABLE_COMPARISONS
+ bool "Enable comparison operands collection by KCOV"
+ depends on KERNEL_KCOV
+ help
+ KCOV also exposes operands of every comparison in the instrumented
+ code along with operand sizes and PCs of the comparison instructions.
+ These operands can be used by fuzzing engines to improve the quality
+ of fuzzing coverage.
+
+config KERNEL_KCOV_INSTRUMENT_ALL
+ bool "Instrument all code by default"
+ depends on KERNEL_KCOV
+ default y if KERNEL_KCOV
+ help
+ If you are doing generic system call fuzzing (like e.g. syzkaller),
+ then you will want to instrument the whole kernel and you should
+ say y here. If you are doing more targeted fuzzing (like e.g.
+ filesystem fuzzing with AFL) then you will want to enable coverage
+ for more specific subsets of files, and should say n here.
+
+config KERNEL_TASKSTATS
+ bool "Compile the kernel with task resource/io statistics and accounting"
+ default n
+ help
+ Enable the collection and publishing of task/io statistics and
+ accounting. Enable this option to enable i/o monitoring in system
+ monitors.
+
+if KERNEL_TASKSTATS
+
+ config KERNEL_TASK_DELAY_ACCT
+ def_bool y
+
+ config KERNEL_TASK_IO_ACCOUNTING
+ def_bool y
+
+ config KERNEL_TASK_XACCT
+ def_bool y
+
+endif
+
config KERNEL_KALLSYMS
bool "Compile the kernel with symbol table information"
- default y
+ default y if !SMALL_FLASH
help
This will give you more information in stack traces from kernel oopses.
depends on KERNEL_FUNCTION_TRACER
default n
+config KERNEL_IRQSOFF_TRACER
+ bool "Interrupts-off Latency Tracer"
+ depends on KERNEL_FTRACE
+ help
+ This option measures the time spent in irqs-off critical
+ sections, with microsecond accuracy.
+
+ The default measurement method is a maximum search, which is
+ disabled by default and can be runtime (re-)started
+ via:
+
+ echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
+
+ (Note that kernel size and overhead increase with this option
+ enabled. This option and the preempt-off timing option can be
+ used together or separately.)
+
+config KERNEL_PREEMPT_TRACER
+ bool "Preemption-off Latency Tracer"
+ depends on KERNEL_FTRACE
+ help
+ This option measures the time spent in preemption-off critical
+ sections, with microsecond accuracy.
+
+ The default measurement method is a maximum search, which is
+ disabled by default and can be runtime (re-)started
+ via:
+
+ echo 0 > /sys/kernel/debug/tracing/tracing_max_latency
+
+ (Note that kernel size and overhead increase with this option
+ enabled. This option and the irqs-off timing option can be
+ used together or separately.)
+
+config KERNEL_HIST_TRIGGERS
+ bool "Histogram triggers"
+ depends on KERNEL_FTRACE
+ help
+ Hist triggers allow one or more arbitrary trace event fields to be
+ aggregated into hash tables and dumped to stdout by reading a
+ debugfs/tracefs file. They're useful for gathering quick and dirty
+ (though precise) summaries of event activity as an initial guide for
+ further investigation using more advanced tools.
+
+ Inter-event tracing of quantities such as latencies is also
+ supported using hist triggers under this option.
+
config KERNEL_DEBUG_KERNEL
bool
default n
config KERNEL_DEBUG_INFO
bool "Compile the kernel with debug information"
- default y
+ default y if !SMALL_FLASH
select KERNEL_DEBUG_KERNEL
help
This will compile your kernel and modules with debug information.
+config KERNEL_DEBUG_INFO_BTF
+
+ bool "Enable additional BTF type information"
+ default n
+ depends on !HOST_OS_MACOS
+ depends on KERNEL_DEBUG_INFO && !KERNEL_DEBUG_INFO_REDUCED
+ select DWARVES
+ help
+ Generate BPF Type Format (BTF) information from DWARF debug info.
+ Turning this on expects presence of pahole tool, which will convert
+ DWARF type info into equivalent deduplicated BTF type info.
+
+ Required to run BPF CO-RE applications.
+
+config KERNEL_DEBUG_INFO_REDUCED
+ bool "Reduce debugging information"
+ default y
+ depends on KERNEL_DEBUG_INFO
+ help
+ If you say Y here gcc is instructed to generate less debugging
+ information for structure types. This means that tools that
+ need full debugging information (like kgdb or systemtap) won't
+ be happy. But if you merely need debugging information to
+ resolve line numbers there is no loss. Advantage is that
+ build directory object sizes shrink dramatically over a full
+ DEBUG_INFO build and compile times are reduced too.
+ Only works with newer gcc versions.
+
config KERNEL_DEBUG_LL_UART_NONE
bool
default n
help
ARM low level debugging.
-config KERNEL_DYNAMIC_DEBUG
+config KERNEL_DYNAMIC_DEBUG
bool "Compile the kernel with dynamic printk"
select KERNEL_DEBUG_FS
default n
debugging purposes to send messages over the serial console in early boot.
Enable this to debug early boot problems.
-config KERNEL_AIO
- bool "Compile the kernel with asynchronous IO support"
+config KERNEL_KPROBES
+ bool "Compile the kernel with kprobes support"
default n
+ select KERNEL_FTRACE
+ select KERNEL_PERF_EVENTS
+ help
+ Compiles the kernel with KPROBES support, which allows you to trap
+ at almost any kernel address and execute a callback function.
+ register_kprobe() establishes a probepoint and specifies the
+ callback. Kprobes is useful for kernel debugging, non-intrusive
+ instrumentation and testing.
+ If in doubt, say "N".
+
+config KERNEL_KPROBE_EVENTS
+ bool
+ default y if KERNEL_KPROBES
-config KERNEL_DIRECT_IO
- bool "Compile the kernel with direct IO support"
+config KERNEL_BPF_EVENTS
+ bool "Compile the kernel with BPF event support"
default n
+ select KERNEL_KPROBES
+ help
+ Allows to attach BPF programs to kprobe, uprobe and tracepoint events.
+ This is required to use BPF maps of type BPF_MAP_TYPE_PERF_EVENT_ARRAY
+ for sending data from BPF programs to user-space for post-processing
+ or logging.
+
+config KERNEL_BPF_KPROBE_OVERRIDE
+ bool
+ default n
+ depends on KERNEL_KPROBES
+
+config KERNEL_AIO
+ bool "Compile the kernel with asynchronous IO support"
+ default y if !SMALL_FLASH
+
+config KERNEL_IO_URING
+ bool "Compile the kernel with io_uring support"
+ default y if !SMALL_FLASH
config KERNEL_FHANDLE
bool "Compile the kernel with support for fhandle syscalls"
- default n
+ default y if !SMALL_FLASH
config KERNEL_FANOTIFY
bool "Compile the kernel with modern file notification support"
- default n
+ default y if !SMALL_FLASH
config KERNEL_BLK_DEV_BSG
bool "Compile the kernel with SCSI generic v4 support for any block device"
default n
+config KERNEL_TRANSPARENT_HUGEPAGE
+ bool
+
+choice
+ prompt "Transparent Hugepage Support sysfs defaults"
+ depends on KERNEL_TRANSPARENT_HUGEPAGE
+ default KERNEL_TRANSPARENT_HUGEPAGE_ALWAYS
+
+ config KERNEL_TRANSPARENT_HUGEPAGE_ALWAYS
+ bool "always"
+
+ config KERNEL_TRANSPARENT_HUGEPAGE_MADVISE
+ bool "madvise"
+endchoice
+
+config KERNEL_HUGETLBFS
+ bool
+
+config KERNEL_HUGETLB_PAGE
+ bool "Compile the kernel with HugeTLB support"
+ select KERNEL_TRANSPARENT_HUGEPAGE
+ select KERNEL_HUGETLBFS
+ default n
+
config KERNEL_MAGIC_SYSRQ
bool "Compile the kernel with SysRq support"
default y
+config KERNEL_DEBUG_PINCTRL
+ bool "Compile the kernel with pinctrl debugging"
+ select KERNEL_DEBUG_KERNEL
+
+config KERNEL_DEBUG_GPIO
+ bool "Compile the kernel with gpio debugging"
+ select KERNEL_DEBUG_KERNEL
+
config KERNEL_COREDUMP
bool
config KERNEL_ELF_CORE
bool "Enable process core dump support"
select KERNEL_COREDUMP
- default y
+ default y if !SMALL_FLASH
config KERNEL_PROVE_LOCKING
bool "Enable kernel lock checking"
select KERNEL_DEBUG_KERNEL
default n
+config KERNEL_SOFTLOCKUP_DETECTOR
+ bool "Compile the kernel with detect Soft Lockups"
+ depends on KERNEL_DEBUG_KERNEL
+ help
+ Say Y here to enable the kernel to act as a watchdog to detect
+ soft lockups.
+
+ Softlockups are bugs that cause the kernel to loop in kernel
+ mode for more than 20 seconds, without giving other tasks a
+ chance to run. The current stack trace is displayed upon
+ detection and the system will stay locked up.
+
+config KERNEL_DETECT_HUNG_TASK
+ bool "Compile the kernel with detect Hung Tasks"
+ depends on KERNEL_DEBUG_KERNEL
+ default KERNEL_SOFTLOCKUP_DETECTOR
+ help
+ Say Y here to enable the kernel to detect "hung tasks",
+ which are bugs that cause the task to be stuck in
+ uninterruptible "D" state indefinitely.
+
+ When a hung task is detected, the kernel will print the
+ current stack trace (which you should report), but the
+ task will stay in uninterruptible state. If lockdep is
+ enabled then all held locks will also be reported. This
+ feature has negligible overhead.
+
+config KERNEL_WQ_WATCHDOG
+ bool "Compile the kernel with detect Workqueue Stalls"
+ depends on KERNEL_DEBUG_KERNEL
+ help
+ Say Y here to enable stall detection on workqueues. If a
+ worker pool doesn't make forward progress on a pending work
+ item for over a given amount of time, 30s by default, a
+ warning message is printed along with dump of workqueue
+ state. This can be configured through kernel parameter
+ "workqueue.watchdog_thresh" and its sysfs counterpart.
+
+config KERNEL_DEBUG_ATOMIC_SLEEP
+ bool "Compile the kernel with sleep inside atomic section checking"
+ depends on KERNEL_DEBUG_KERNEL
+ help
+ If you say Y here, various routines which may sleep will become very
+ noisy if they are called inside atomic sections: when a spinlock is
+ held, inside an rcu read side critical section, inside preempt disabled
+ sections, inside an interrupt, etc...
+
+config KERNEL_DEBUG_VM
+ bool "Compile the kernel with debug VM"
+ depends on KERNEL_DEBUG_KERNEL
+ help
+ Enable this to turn on extended checks in the virtual-memory system
+ that may impact performance.
+
+ If unsure, say N.
+
config KERNEL_PRINTK_TIME
bool "Enable printk timestamps"
default y
config KERNEL_KEXEC
bool "Enable kexec support"
+config KERNEL_PROC_VMCORE
+ bool
+
+config KERNEL_PROC_KCORE
+ bool
+
+config KERNEL_CRASH_DUMP
+ depends on i386 || x86_64 || arm || armeb
+ select KERNEL_KEXEC
+ select KERNEL_PROC_VMCORE
+ select KERNEL_PROC_KCORE
+ bool "Enable support for kexec crashdump"
+ default y
+
config USE_RFKILL
bool "Enable rfkill support"
default RFKILL_SUPPORT
default n
help
devtmpfs is a simple, kernel-managed /dev filesystem. The kernel creates
- devices nodes for all registered devices ti simplify boot, but leaves more
+ devices nodes for all registered devices to simplify boot, but leaves more
complex tasks to userspace (e.g. udev).
if KERNEL_DEVTMPFS
endif
+config KERNEL_KEYS
+ bool "Enable kernel access key retention support"
+ default !SMALL_FLASH
+
+config KERNEL_PERSISTENT_KEYRINGS
+ bool "Enable kernel persistent keyrings"
+ depends on KERNEL_KEYS
+ default n
+
+config KERNEL_KEYS_REQUEST_CACHE
+ bool "Enable temporary caching of the last request_key() result"
+ depends on KERNEL_KEYS
+ default n
+
+config KERNEL_BIG_KEYS
+ bool "Enable large payload keys on kernel keyrings"
+ depends on KERNEL_KEYS
+ default n
+
#
# CGROUP support symbols
#
config KERNEL_CGROUPS
bool "Enable kernel cgroups"
- default n
+ default y if !SMALL_FLASH
if KERNEL_CGROUPS
config KERNEL_FREEZER
bool
- default y if KERNEL_CGROUP_FREEZER
config KERNEL_CGROUP_FREEZER
- bool "Freezer cgroup subsystem"
- default y
+ bool "legacy Freezer cgroup subsystem"
+ default n
+ select KERNEL_FREEZER
help
Provides a way to freeze and unfreeze all tasks in a
cgroup.
+ (legacy cgroup1-only controller, in cgroup2 freezer
+ is integrated in the Memory controller)
config KERNEL_CGROUP_DEVICE
- bool "Device controller for cgroups"
- default y
+ bool "legacy Device controller for cgroups"
+ default n
help
Provides a cgroup implementing whitelists for devices which
a process in the cgroup can mknod or open.
+ (legacy cgroup1-only controller)
+
+ config KERNEL_CGROUP_HUGETLB
+ bool "HugeTLB controller"
+ default n
+ select KERNEL_HUGETLB_PAGE
+
+ config KERNEL_CGROUP_PIDS
+ bool "PIDs cgroup subsystem"
+ default y
+ help
+ Provides enforcement of process number limits in the scope of a
+ cgroup.
+
+ config KERNEL_CGROUP_RDMA
+ bool "RDMA controller for cgroups"
+ default y
+
+ config KERNEL_CGROUP_BPF
+ bool "Support for eBPF programs attached to cgroups"
+ default y
config KERNEL_CPUSETS
bool "Cpuset support"
- default n
+ default y
help
This option will let you create and manage CPUSETs which
allow dynamically partitioning a system into sets of CPUs and
config KERNEL_CGROUP_CPUACCT
bool "Simple CPU accounting cgroup subsystem"
- default n
+ default y
help
Provides a simple Resource Controller for monitoring the
total CPU consumed by the tasks in a cgroup.
config KERNEL_RESOURCE_COUNTERS
bool "Resource counters"
- default n
+ default y
help
This option enables controller independent resource accounting
infrastructure that works with cgroups.
config KERNEL_MEMCG
bool "Memory Resource Controller for Control Groups"
- default n
- depends on KERNEL_RESOURCE_COUNTERS
+ default y
+ select KERNEL_FREEZER
+ depends on KERNEL_RESOURCE_COUNTERS || !LINUX_3_18
help
Provides a memory resource controller that manages both anonymous
memory and page cache. (See Documentation/cgroups/memory.txt)
config KERNEL_MEMCG_SWAP
bool "Memory Resource Controller Swap Extension"
- default n
+ default y
depends on KERNEL_MEMCG
help
Add swap management feature to memory resource controller. When you
config KERNEL_MEMCG_KMEM
bool "Memory Resource Controller Kernel Memory accounting (EXPERIMENTAL)"
- default n
+ default y
depends on KERNEL_MEMCG
help
The Kernel Memory extension for Memory Resource Controller can limit
menuconfig KERNEL_CGROUP_SCHED
bool "Group CPU scheduler"
- default n
+ default y
help
This feature lets CPU scheduler recognize task groups and control CPU
bandwidth allocation to such task groups. It uses cgroups to group
config KERNEL_FAIR_GROUP_SCHED
bool "Group scheduling for SCHED_OTHER"
- default n
+ default y
config KERNEL_CFS_BANDWIDTH
bool "CPU bandwidth provisioning for FAIR_GROUP_SCHED"
- default n
+ default y
depends on KERNEL_FAIR_GROUP_SCHED
help
This option allows users to define CPU bandwidth rates (limits) for
config KERNEL_RT_GROUP_SCHED
bool "Group scheduling for SCHED_RR/FIFO"
- default n
+ default y
help
This feature lets you explicitly allocate real CPU bandwidth
to task groups. If enabled, it will also make it impossible to
CONFIG_CFQ_GROUP_IOSCHED=y; for enabling throttling policy, set
CONFIG_BLK_DEV_THROTTLING=y.
+ if KERNEL_BLK_CGROUP
+
+ config KERNEL_CFQ_GROUP_IOSCHED
+ bool "Proportional weight of disk bandwidth in CFQ"
+
+ config KERNEL_BLK_DEV_THROTTLING
+ bool "Enable throttling policy"
+ default y
+
+ config KERNEL_BLK_DEV_THROTTLING_LOW
+ bool "Block throttling .low limit interface support (EXPERIMENTAL)"
+ depends on KERNEL_BLK_DEV_THROTTLING
+ endif
+
config KERNEL_DEBUG_BLK_CGROUP
bool "Enable Block IO controller debugging"
default n
files in a cgroup which can be useful for debugging.
config KERNEL_NET_CLS_CGROUP
- bool "Control Group Classifier"
- default y
+ bool "legacy Control Group Classifier"
+ default n
- config KERNEL_NETPRIO_CGROUP
- bool "Network priority cgroup"
- default y
+ config KERNEL_CGROUP_NET_CLASSID
+ bool "legacy Network classid cgroup"
+ default n
+
+ config KERNEL_CGROUP_NET_PRIO
+ bool "legacy Network priority cgroup"
+ default n
endif
config KERNEL_NAMESPACES
bool "Enable kernel namespaces"
- default n
+ default y if !SMALL_FLASH
if KERNEL_NAMESPACES
endif
+config KERNEL_DEVPTS_MULTIPLE_INSTANCES
+ bool "Support multiple instances of devpts"
+ default y if !SMALL_FLASH
+ help
+ Enable support for multiple instances of devpts filesystem.
+ If you want to have isolated PTY namespaces (eg: in containers),
+ say Y here. Otherwise, say N. If enabled, each mount of devpts
+ filesystem with the '-o newinstance' option will create an
+ independent PTY namespace.
+
+config KERNEL_POSIX_MQUEUE
+ bool "POSIX Message Queues"
+ default y if !SMALL_FLASH
+ help
+ POSIX variant of message queues is a part of IPC. In POSIX message
+ queues every message has a priority which decides about succession
+ of receiving it by a process. If you want to compile and run
+ programs written e.g. for Solaris with use of its POSIX message
+ queues (functions mq_*) say Y here.
+
+ POSIX message queues are visible as a filesystem called 'mqueue'
+ and can be mounted somewhere if you want to do filesystem
+ operations on message queues.
+
+
+config KERNEL_SECCOMP_FILTER
+ bool
+ default y if !SMALL_FLASH
+
+config KERNEL_SECCOMP
+ bool "Enable seccomp support"
+ depends on !(TARGET_uml)
+ select KERNEL_SECCOMP_FILTER
+ default y if !SMALL_FLASH
+ help
+ Build kernel with support for seccomp.
+
+#
+# IPv4 configuration
+#
+
+config KERNEL_IP_MROUTE
+ bool "Enable IPv4 multicast routing"
+ default y
+ help
+ Multicast routing requires a multicast routing daemon in
+ addition to kernel support.
+
+if KERNEL_IP_MROUTE
+
+ config KERNEL_IP_MROUTE_MULTIPLE_TABLES
+ def_bool y
+
+ config KERNEL_IP_PIMSM_V1
+ def_bool y
+
+ config KERNEL_IP_PIMSM_V2
+ def_bool y
+
+endif
+
#
-# LXC related symbols
+# IPv6 configuration
#
-config KERNEL_LXC_MISC
- bool "Enable miscellaneous LXC related options"
- default n
+config KERNEL_IPV6
+ def_bool IPV6
+
+if KERNEL_IPV6
-if KERNEL_LXC_MISC
+ config KERNEL_IPV6_MULTIPLE_TABLES
+ def_bool y
- config KERNEL_DEVPTS_MULTIPLE_INSTANCES
- bool "Support multiple instances of devpts"
+ config KERNEL_IPV6_SUBTREES
+ def_bool y
+
+ config KERNEL_IPV6_MROUTE
+ bool "Enable IPv6 multicast routing"
default y
help
- Enable support for multiple instances of devpts filesystem.
- If you want to have isolated PTY namespaces (eg: in containers),
- say Y here. Otherwise, say N. If enabled, each mount of devpts
- filesystem with the '-o newinstance' option will create an
- independent PTY namespace.
-
- config KERNEL_POSIX_MQUEUE
- bool "POSIX Message Queues"
- default y
+ Multicast routing requires a multicast routing daemon in
+ addition to kernel support.
+
+ if KERNEL_IPV6_MROUTE
+
+ config KERNEL_IPV6_MROUTE_MULTIPLE_TABLES
+ def_bool y
+
+ config KERNEL_IPV6_PIMSM_V2
+ def_bool y
+
+ endif
+
+ config KERNEL_IPV6_SEG6_LWTUNNEL
+ bool "Enable support for lightweight tunnels"
+ default y if !SMALL_FLASH
help
- POSIX variant of message queues is a part of IPC. In POSIX message
- queues every message has a priority which decides about succession
- of receiving it by a process. If you want to compile and run
- programs written e.g. for Solaris with use of its POSIX message
- queues (functions mq_*) say Y here.
+ Using lwtunnel (needed for IPv6 segment routing) requires ip-full package.
- POSIX message queues are visible as a filesystem called 'mqueue'
- and can be mounted somewhere if you want to do filesystem
- operations on message queues.
+ config KERNEL_LWTUNNEL_BPF
+ def_bool n
endif
-config KERNEL_SECCOMP
- bool "Enable seccomp support"
- depends on !(TARGET_uml)
+#
+# Miscellaneous network configuration
+#
+
+config KERNEL_NET_L3_MASTER_DEV
+ bool "L3 Master device support"
+ help
+ This module provides glue between core networking code and device
+ drivers to support L3 master devices like VRF.
+
+#
+# NFS related symbols
+#
+config KERNEL_IP_PNP
+ bool "Compile the kernel with rootfs on NFS"
+ help
+ If you want to make your kernel boot off a NFS server as root
+ filesystem, select Y here.
+
+if KERNEL_IP_PNP
+
+ config KERNEL_IP_PNP_DHCP
+ def_bool y
+
+ config KERNEL_IP_PNP_BOOTP
+ def_bool n
+
+ config KERNEL_IP_PNP_RARP
+ def_bool n
+
+ config KERNEL_NFS_FS
+ def_bool y
+
+ config KERNEL_NFS_V2
+ def_bool y
+
+ config KERNEL_NFS_V3
+ def_bool y
+
+ config KERNEL_ROOT_NFS
+ def_bool y
+
+endif
+
+menu "Filesystem ACL and attr support options"
+ config USE_FS_ACL_ATTR
+ bool "Use filesystem ACL and attr support by default"
default n
help
- Build kernel with support for seccomp.
+ Make using ACLs (e.g. POSIX ACL, NFSv4 ACL) the default
+ for kernel and packages, except tmpfs, flash filesystems,
+ and old NFS. Also enable userspace extended attribute support
+ by default. (OpenWrt already has an expection it will be
+ present in the kernel).
+
+ config KERNEL_FS_POSIX_ACL
+ bool "Enable POSIX ACL support"
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_BTRFS_FS_POSIX_ACL
+ bool "Enable POSIX ACL for BtrFS Filesystems"
+ select KERNEL_FS_POSIX_ACL
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_EXT4_FS_POSIX_ACL
+ bool "Enable POSIX ACL for Ext4 Filesystems"
+ select KERNEL_FS_POSIX_ACL
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_F2FS_FS_POSIX_ACL
+ bool "Enable POSIX ACL for F2FS Filesystems"
+ select KERNEL_FS_POSIX_ACL
+ default n
-config KERNEL_SECCOMP_FILTER
- bool "Enable seccomp filter support"
- depends on KERNEL_SECCOMP
+ config KERNEL_JFFS2_FS_POSIX_ACL
+ bool "Enable POSIX ACL for JFFS2 Filesystems"
+ select KERNEL_FS_POSIX_ACL
default n
- help
- Build kernel with support for seccomp BPF programs.
+
+ config KERNEL_TMPFS_POSIX_ACL
+ bool "Enable POSIX ACL for TMPFS Filesystems"
+ select KERNEL_FS_POSIX_ACL
+ default n
+
+ config KERNEL_CIFS_ACL
+ bool "Enable CIFS ACLs"
+ select KERNEL_FS_POSIX_ACL
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_HFS_FS_POSIX_ACL
+ bool "Enable POSIX ACL for HFS Filesystems"
+ select KERNEL_FS_POSIX_ACL
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_HFSPLUS_FS_POSIX_ACL
+ bool "Enable POSIX ACL for HFS+ Filesystems"
+ select KERNEL_FS_POSIX_ACL
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_NFS_ACL_SUPPORT
+ bool "Enable ACLs for NFS"
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_NFS_V3_ACL_SUPPORT
+ bool "Enable ACLs for NFSv3"
+ default n
+
+ config KERNEL_NFSD_V2_ACL_SUPPORT
+ bool "Enable ACLs for NFSDv2"
+ default n
+
+ config KERNEL_NFSD_V3_ACL_SUPPORT
+ bool "Enable ACLs for NFSDv3"
+ default n
+
+ config KERNEL_REISER_FS_POSIX_ACL
+ bool "Enable POSIX ACLs for ReiserFS"
+ select KERNEL_FS_POSIX_ACL
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_XFS_POSIX_ACL
+ bool "Enable POSIX ACLs for XFS"
+ select KERNEL_FS_POSIX_ACL
+ default y if USE_FS_ACL_ATTR
+
+ config KERNEL_JFS_POSIX_ACL
+ bool "Enable POSIX ACLs for JFS"
+ select KERNEL_FS_POSIX_ACL
+ default y if USE_FS_ACL_ATTR
+
+endmenu
+
+config KERNEL_DEVMEM
+ bool "/dev/mem virtual device support"
+ help
+ Say Y here if you want to support the /dev/mem device.
+ The /dev/mem device is used to access areas of physical
+ memory.
+
+config KERNEL_DEVKMEM
+ bool "/dev/kmem virtual device support"
+ help
+ Say Y here if you want to support the /dev/kmem device. The
+ /dev/kmem device is rarely used, but can be used for certain
+ kind of kernel debugging operations.
+
+config KERNEL_SQUASHFS_FRAGMENT_CACHE_SIZE
+ int "Number of squashfs fragments cached"
+ default 2 if (SMALL_FLASH && !LOW_MEMORY_FOOTPRINT)
+ default 3
+
+config KERNEL_SQUASHFS_XATTR
+ bool "Squashfs XATTR support"
+
+#
+# compile optimization setting
+#
+choice
+ prompt "Compiler optimization level"
+ default KERNEL_CC_OPTIMIZE_FOR_SIZE if SMALL_FLASH
+
+config KERNEL_CC_OPTIMIZE_FOR_PERFORMANCE
+ bool "Optimize for performance"
+ help
+ This is the default optimization level for the kernel, building
+ with the "-O2" compiler flag for best performance and most
+ helpful compile-time warnings.
+
+config KERNEL_CC_OPTIMIZE_FOR_SIZE
+ bool "Optimize for size"
+ help
+ Enabling this option will pass "-Os" instead of "-O2" to
+ your compiler resulting in a smaller kernel.
+
+endchoice
+
+config KERNEL_AUDIT
+ bool "Auditing support"
+
+config KERNEL_SECURITY
+ bool "Enable different security models"
+
+config KERNEL_SECURITY_NETWORK
+ bool "Socket and Networking Security Hooks"
+ select KERNEL_SECURITY
+
+config KERNEL_SECURITY_SELINUX
+ bool "NSA SELinux Support"
+ select KERNEL_SECURITY_NETWORK
+ select KERNEL_AUDIT
+
+config KERNEL_SECURITY_SELINUX_BOOTPARAM
+ bool "NSA SELinux boot parameter"
+ depends on KERNEL_SECURITY_SELINUX
+ default y
+
+config KERNEL_SECURITY_SELINUX_DISABLE
+ bool "NSA SELinux runtime disable"
+ depends on KERNEL_SECURITY_SELINUX
+
+config KERNEL_SECURITY_SELINUX_DEVELOP
+ bool "NSA SELinux Development Support"
+ depends on KERNEL_SECURITY_SELINUX
+ default y
+
+config KERNEL_SECURITY_SELINUX_SIDTAB_HASH_BITS
+ int
+ depends on KERNEL_SECURITY_SELINUX
+ default 9
+
+config KERNEL_SECURITY_SELINUX_SID2STR_CACHE_SIZE
+ int
+ depends on KERNEL_SECURITY_SELINUX
+ default 256
+
+config KERNEL_LSM
+ string
+ default "lockdown,yama,loadpin,safesetid,integrity,selinux"
+ depends on KERNEL_SECURITY_SELINUX
+
+config KERNEL_EXT4_FS_SECURITY
+ bool "Ext4 Security Labels"
+
+config KERNEL_F2FS_FS_SECURITY
+ bool "F2FS Security Labels"
+
+config KERNEL_UBIFS_FS_SECURITY
+ bool "UBIFS Security Labels"
+
+config KERNEL_JFFS2_FS_SECURITY
+ bool "JFFS2 Security Labels"
projects / openwrt / staging / chunkeey.git / blobdiff