PKG_NAME:=ipq-wifi
PKG_RELEASE:=1
+PKG_FLAGS:=nonshared
include $(INCLUDE_DIR)/package.mk
define Build/Compile
endef
-ALLWIFIBOARDS:=rt-ac58u fritz4040 nbg6617
+# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
+# to generate the board-* files here.
+#
+# This is intended to be used on an interim basis until device-specific
+# board data for new devices is available through the upstream compilation
+#
+# Please send a mail with your device-specific board files upstream.
+# You can find instructions and examples on the linux-wireless wiki:
+# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
+
+ALLWIFIBOARDS:= \
+ 8dev_habanero-dvk \
+ aruba_ap-303 \
+ avm_fritzrepeater-1200 \
+ buffalo_wtr-m2133hp \
+ cellc_rtl30vw \
+ devolo_magic-2-wifi-next \
+ dlink_dap2610 \
+ edgecore_ecw5410 \
+ edgecore_oap100 \
+ engenius_eap2200 \
+ engenius_emd1 \
+ engenius_emr3500 \
+ ezviz_cs-w3-wd1200g-eup \
+ glinet_gl-ap1300 \
+ glinet_gl-s1300 \
+ linksys_ea8300 \
+ linksys_mr8300-v0 \
+ luma_wrtq-329acn \
+ mikrotik_hap-ac2 \
+ mikrotik_hap-ac3 \
+ mikrotik_sxtsq-5-ac \
+ mobipromo_cm520-79f \
+ nec_wg2600hp3 \
+ p2w_r619ac \
+ plasmacloud_pa1200 \
+ plasmacloud_pa2200 \
+ qxwlan_e2600ac
+
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
- SUBMENU:=ath10k IPQ4019 Boarddata
+ SUBMENU:=ath10k Board-Specific Overrides
SECTION:=firmware
CATEGORY:=Firmware
- DEPENDS:=@TARGET_ipq806x +ath10k-firmware-qca4019
+ DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x)
TITLE:=Custom Board
endef
+define ipq-wifi-install-one-to
+ $(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/
+ $(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
+endef
+
+define ipq-wifi-install-one
+ $(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
+ $(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
+ $(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
+ $(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
+ $(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
+ )))
+
+endef
+# Blank line required at end of above define due to foreach context
+
define generate-ipq-wifi-package
define Package/ipq-wifi-$(1)
$(call Package/ipq-wifi-default)
- TITLE:=Board for $(3)
+ TITLE:=board-2.bin Overrides for $(2)
CONFLICTS:=$(PREV_BOARD)
endef
define Package/ipq-wifi-$(1)/description
-This device custom package board-2.bin overwrites the board-2.bin
-file which is supplied by the ath10k-firmware-qca4019 package.
+The $(2) requires board-specific, reference ("cal") data
+that is not yet present in the upstream wireless firmware distribution.
+
+This package supplies board-2.bin file(s) that, in the interim,
+overwrite those supplied by the ath10k-firmware-* packages.
-This is package is only necessary for the $(3).
-Don't install it for any other device!
+This is package is only necessary for the $(2).
+
+Do not install it for any other device!
endef
define Package/ipq-wifi-$(1)/install-overlay
- $(INSTALL_DIR) $$(1)/lib/firmware/ath10k/QCA4019/hw1.0
- $(INSTALL_DATA) ./$(2) $$(1)/lib/firmware/ath10k/QCA4019/hw1.0/board-2.bin
+ $$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard board-$(1).*),\
+ $$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
endef
PREV_BOARD+=ipq-wifi-$(1)
endef
-$(eval $(call generate-ipq-wifi-package,rt-ac58u,board-rt-ac58u.bin,ASUS RT-AC58U/RT-ACRH13))
-$(eval $(call generate-ipq-wifi-package,fritz4040,board-fritz4040.bin,AVM FRITZBox 4040))
-$(eval $(call generate-ipq-wifi-package,nbg6617,board-nbg6617.bin,ZyXEL NBG6617))
+# Add board name to ALLWIFIBOARDS
+# Place files in this directory as board-<devicename>.<qca4019|qca9888|qca9984>
+# Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
+
+$(eval $(call generate-ipq-wifi-package,8dev_habanero-dvk,8devices Habanero DVK))
+$(eval $(call generate-ipq-wifi-package,aruba_ap-303,Aruba AP-303))
+$(eval $(call generate-ipq-wifi-package,avm_fritzrepeater-1200,AVM FRITZRepeater 1200))
+$(eval $(call generate-ipq-wifi-package,buffalo_wtr-m2133hp,Buffalo WTR-M2133HP))
+$(eval $(call generate-ipq-wifi-package,cellc_rtl30vw, Cell C RTL30VW))
+$(eval $(call generate-ipq-wifi-package,devolo_magic-2-wifi-next,devolo Magic 2 WiFi next))
+$(eval $(call generate-ipq-wifi-package,dlink_dap2610,D-Link DAP-2610))
+$(eval $(call generate-ipq-wifi-package,edgecore_ecw5410,Edgecore ECW5410))
+$(eval $(call generate-ipq-wifi-package,edgecore_oap100,Edgecore OAP100))
+$(eval $(call generate-ipq-wifi-package,engenius_eap2200,EnGenius EAP2200))
+$(eval $(call generate-ipq-wifi-package,engenius_emd1,EnGenius EMD1))
+$(eval $(call generate-ipq-wifi-package,engenius_emr3500,EnGenius EMR3500))
+$(eval $(call generate-ipq-wifi-package,ezviz_cs-w3-wd1200g-eup,EZVIZ CS-W3-WD1200G EUP))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-ap1300,GL.iNet GL-AP1300))
+$(eval $(call generate-ipq-wifi-package,glinet_gl-s1300,GL.iNet GL-S1300))
+$(eval $(call generate-ipq-wifi-package,linksys_ea8300,Linksys EA8300))
+$(eval $(call generate-ipq-wifi-package,linksys_mr8300-v0,Linksys MR8300))
+$(eval $(call generate-ipq-wifi-package,luma_wrtq-329acn,Luma WRTQ-329ACN))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac2,Mikrotik hAP ac2))
+$(eval $(call generate-ipq-wifi-package,mikrotik_hap-ac3,Mikrotik hAP ac3))
+$(eval $(call generate-ipq-wifi-package,mikrotik_sxtsq-5-ac,MikroTik SXTsq 5 ac))
+$(eval $(call generate-ipq-wifi-package,mobipromo_cm520-79f,MobiPromo CM520-79F))
+$(eval $(call generate-ipq-wifi-package,nec_wg2600hp3,NEC Platforms WG2600HP3))
+$(eval $(call generate-ipq-wifi-package,p2w_r619ac,P&W R619AC))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa1200,Plasma Cloud PA1200))
+$(eval $(call generate-ipq-wifi-package,plasmacloud_pa2200,Plasma Cloud PA2200))
+$(eval $(call generate-ipq-wifi-package,qxwlan_e2600ac,Qxwlan E2600AC))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
projects / openwrt / staging / chunkeey.git / blobdiff