--- a/nl80211.h
+++ b/nl80211.h
-@@ -323,7 +323,7 @@
+@@ -10,7 +10,7 @@
+ * Copyright 2008, 2009 Luis R. Rodriguez <lrodriguez@atheros.com>
+ * Copyright 2008 Jouni Malinen <jouni.malinen@atheros.com>
+ * Copyright 2008 Colin McCabe <colin@cozybit.com>
+- * Copyright 2015 Intel Deutschland GmbH
++ * Copyright 2015-2017 Intel Deutschland GmbH
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+@@ -173,6 +173,65 @@
+ */
+
+ /**
++ * DOC: WPA/WPA2 EAPOL handshake offload
++ *
++ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers
++ * can indicate they support offloading EAPOL handshakes for WPA/WPA2
++ * preshared key authentication. In %NL80211_CMD_CONNECT the preshared
++ * key should be specified using %NL80211_ATTR_PMK. Drivers supporting
++ * this offload may reject the %NL80211_CMD_CONNECT when no preshared
++ * key material is provided, for example when that driver does not
++ * support setting the temporal keys through %CMD_NEW_KEY.
++ *
++ * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be
++ * set by drivers indicating offload support of the PTK/GTK EAPOL
++ * handshakes during 802.1X authentication. In order to use the offload
++ * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS
++ * attribute flag. Drivers supporting this offload may reject the
++ * %NL80211_CMD_CONNECT when the attribute flag is not present.
++ *
++ * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK
++ * using %NL80211_CMD_SET_PMK. For offloaded FT support also
++ * %NL80211_ATTR_PMKR0_NAME must be provided.
++ */
++
++/**
++ * DOC: FILS shared key authentication offload
++ *
++ * FILS shared key authentication offload can be advertized by drivers by
++ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support
++ * FILS shared key authentication offload should be able to construct the
++ * authentication and association frames for FILS shared key authentication and
++ * eventually do a key derivation as per IEEE 802.11ai. The below additional
++ * parameters should be given to driver in %NL80211_CMD_CONNECT.
++ * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai
++ * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai
++ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message
++ * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK
++ * rIK should be used to generate an authentication tag on the ERP message and
++ * rMSK should be used to derive a PMKSA.
++ * rIK, rMSK should be generated and keyname_nai, sequence number should be used
++ * as specified in IETF RFC 6696.
++ *
++ * When FILS shared key authentication is completed, driver needs to provide the
++ * below additional parameters to userspace.
++ * %NL80211_ATTR_FILS_KEK - used for key renewal
++ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges
++ * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated
++ * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace
++ * The PMKSA can be maintained in userspace persistently so that it can be used
++ * later after reboots or wifi turn off/on also.
++ *
++ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS
++ * capable AP supporting PMK caching. It specifies the scope within which the
++ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and
++ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based
++ * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with
++ * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to
++ * use in a FILS shared key connection with PMKSA caching.
++ */
++
++/**
+ * enum nl80211_commands - supported nl80211 commands
+ *
+ * @NL80211_CMD_UNSPEC: unspecified command to catch errors
+@@ -323,7 +382,7 @@
* @NL80211_CMD_GET_SCAN: get scan results
* @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters
* %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the
* specify a BSSID to scan for; if not included, the wildcard BSSID will
* be used.
* @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to
-@@ -600,6 +600,20 @@
+@@ -351,7 +410,9 @@
+ * are used. Extra IEs can also be passed from the userspace by
+ * using the %NL80211_ATTR_IE attribute. The first cycle of the
+ * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY
+- * is supplied.
++ * is supplied. If the device supports multiple concurrent scheduled
++ * scans, it will allow such when the caller provides the flag attribute
++ * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it.
+ * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if
+ * scheduled scan is not running. The caller may assume that as soon
+ * as the call returns, it is safe to start a new scheduled scan again.
+@@ -370,10 +431,18 @@
+ * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to
+ * NL80211_CMD_GET_SURVEY and on the "scan" multicast group)
+ *
+- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC
+- * (for the BSSID) and %NL80211_ATTR_PMKID.
++ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC
++ * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK
++ * (PMK is used for PTKSA derivation in case of FILS shared key offload) or
++ * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID,
++ * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS
++ * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier
++ * advertized by a FILS capable AP identifying the scope of PMKSA in an
++ * ESS.
+ * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC
+- * (for the BSSID) and %NL80211_ATTR_PMKID.
++ * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID,
++ * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS
++ * authentication.
+ * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries.
+ *
+ * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain
+@@ -500,8 +569,13 @@
+ * authentication/association or not receiving a response from the AP.
+ * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as
+ * well to remain backwards compatible.
+- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented),
+- * sent as an event when the card/driver roamed by itself.
++ * @NL80211_CMD_ROAM: notifcation indicating the card/driver roamed by itself.
++ * When the driver roamed in a network that requires 802.1X authentication,
++ * %NL80211_ATTR_PORT_AUTHORIZED should be set if the 802.1X authentication
++ * was done by the driver or if roaming was done using Fast Transition
++ * protocol (in which case 802.1X authentication is not needed). If
++ * %NL80211_ATTR_PORT_AUTHORIZED is not set, user space is responsible for
++ * the 802.1X authentication.
+ * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify
+ * userspace that a connection was dropped by the AP or due to other
+ * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and
+@@ -600,6 +674,20 @@
*
* @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface.
*
* @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial
* mesh config parameters may be given.
* @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the
-@@ -874,6 +888,12 @@
+@@ -840,12 +928,15 @@
+ * cfg80211_scan_done().
+ *
+ * @NL80211_CMD_START_NAN: Start NAN operation, identified by its
+- * %NL80211_ATTR_WDEV interface. This interface must have been previously
+- * created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the
+- * NAN interface will create or join a cluster. This command must have a
+- * valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
+- * %NL80211_ATTR_NAN_DUAL attributes.
+- * After this command NAN functions can be added.
++ * %NL80211_ATTR_WDEV interface. This interface must have been
++ * previously created with %NL80211_CMD_NEW_INTERFACE. After it
++ * has been started, the NAN interface will create or join a
++ * cluster. This command must have a valid
++ * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional
++ * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is
++ * omitted or set to 0, it means don't-care and the device will
++ * decide what to use. After this command NAN functions can be
++ * added.
+ * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by
+ * its %NL80211_ATTR_WDEV interface.
+ * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined
+@@ -866,14 +957,32 @@
+ * This command is also used as a notification sent when a NAN function is
+ * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID
+ * and %NL80211_ATTR_COOKIE attributes.
+- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN
+- * must be operational (%NL80211_CMD_START_NAN was executed).
+- * It must contain at least one of the following attributes:
+- * %NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL.
++ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN
++ * configuration. NAN must be operational (%NL80211_CMD_START_NAN
++ * was executed). It must contain at least one of the following
++ * attributes: %NL80211_ATTR_NAN_MASTER_PREF,
++ * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the
++ * current configuration is not changed. If it is present but
++ * set to zero, the configuration is changed to don't-care
++ * (i.e. the device can decide what to do).
+ * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported.
* This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and
* %NL80211_ATTR_COOKIE.
*
+ * BSS selection. This command can be issued only while connected and it
+ * does not result in a change for the current association. Currently,
+ * only the %NL80211_ATTR_IE data is used and updated with this command.
++ *
++ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0
++ * for the given authenticator address (specified with &NL80211_ATTR_MAC).
++ * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the
++ * PMK-R0, otherwise it specifies the PMK.
++ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously
++ * configured PMK for the authenticator address identified by
++ * &NL80211_ATTR_MAC.
+ *
* @NL80211_CMD_MAX: highest used command number
* @__NL80211_CMD_AFTER_LAST: internal use
*/
-@@ -1069,6 +1089,10 @@ enum nl80211_commands {
+@@ -1069,6 +1178,13 @@ enum nl80211_commands {
NL80211_CMD_CHANGE_NAN_CONFIG,
NL80211_CMD_NAN_MATCH,
+ NL80211_CMD_SET_MULTICAST_TO_UNICAST,
+
+ NL80211_CMD_UPDATE_CONNECT_PARAMS,
++
++ NL80211_CMD_SET_PMK,
++ NL80211_CMD_DEL_PMK,
+
/* add new commands above here */
/* used to define NL80211_CMD_MAX below */
-@@ -1638,8 +1662,16 @@ enum nl80211_commands {
+@@ -1638,8 +1754,16 @@ enum nl80211_commands {
* the connection request from a station. nl80211_connect_failed_reason
* enum has different reasons of connection failure.
*
*
* @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from
* association request when used with NL80211_CMD_NEW_STATION)
-@@ -1740,7 +1772,9 @@ enum nl80211_commands {
+@@ -1740,7 +1864,9 @@ enum nl80211_commands {
*
* @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode
* Notification Element based on association request when used with
*
* @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if
* %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet)
-@@ -1788,6 +1822,8 @@ enum nl80211_commands {
- * and remove functions. NAN notifications will be sent in unicast to that
- * socket. Without this attribute, any socket can add functions and the
- * notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
+@@ -1783,11 +1909,12 @@ enum nl80211_commands {
+ * that configured the indoor setting, and the indoor operation would be
+ * cleared when the socket is closed.
+ * If set during NAN interface creation, the interface will be destroyed
+- * if the socket is closed just like any other interface. Moreover, only
+- * the netlink socket that created the interface will be allowed to add
+- * and remove functions. NAN notifications will be sent in unicast to that
+- * socket. Without this attribute, any socket can add functions and the
+- * notifications will be sent to the %NL80211_MCGRP_NAN multicast group.
++ * if the socket is closed just like any other interface. Moreover, NAN
++ * notifications will be sent in unicast to that socket. Without this
++ * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN
++ * multicast group.
+ * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the
+ * station will deauthenticate when the socket is closed.
*
* @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is
* the TDLS link initiator.
-@@ -1936,6 +1972,38 @@ enum nl80211_commands {
+@@ -1927,15 +2054,93 @@ enum nl80211_commands {
+ * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0.
+ * Also, values 1 and 255 are reserved for certification purposes and
+ * should not be used during a normal device operation.
+- * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see
+- * &enum nl80211_nan_dual_band_conf). This attribute is used with
+- * %NL80211_CMD_START_NAN and optionally with
+- * %NL80211_CMD_CHANGE_NAN_CONFIG.
++ * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32
++ * bitmask of BIT(NL80211_BAND_*) as described in %enum
++ * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0
++ * would be set. This attribute is used with
++ * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and
++ * it is optional. If no bands are set, it means don't-care and
++ * the device will decide what to use.
+ * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See
+ * &enum nl80211_nan_func_attributes for description of this nested
* attribute.
* @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute.
* See &enum nl80211_nan_match_attributes.
+ * u32 attribute with an &enum nl80211_timeout_reason value. This is used,
+ * e.g., with %NL80211_CMD_CONNECT event.
+ *
++ * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP)
++ * username part of NAI used to refer keys rRK and rIK. This is used with
++ * %NL80211_CMD_CONNECT.
++ *
++ * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part
++ * of NAI specifying the domain name of the ER server. This is used with
++ * %NL80211_CMD_CONNECT.
++ *
++ * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number
++ * to use in ERP messages. This is used in generating the FILS wrapped data
++ * for FILS authentication and is used with %NL80211_CMD_CONNECT.
++ *
++ * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the
++ * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and
++ * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK
++ * from successful FILS authentication and is used with
++ * %NL80211_CMD_CONNECT.
++ *
++ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP
++ * identifying the scope of PMKSAs. This is used with
++ * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA.
++ *
++ * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with
++ * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID.
++ * For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way
++ * handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is
++ * used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute
++ * specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well.
++ *
++ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to
++ * indicate that it supports multiple active scheduled scan requests.
++ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled
++ * scan request that may be active for the device (u32).
++ *
++ * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include
++ * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it
++ * wants to use the supported offload of the 4-way handshake.
++ * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT.
++ * @NL80211_ATTR_PORT_AUTHORIZED: flag attribute used in %NL80211_CMD_ROAMED
++ * notification indicating that that 802.1X authentication was done by
++ * the driver or is not needed (because roaming used the Fast Transition
++ * protocol).
++ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
*
* @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
-@@ -2195,7 +2263,7 @@ enum nl80211_attrs {
+@@ -2195,7 +2400,7 @@ enum nl80211_attrs {
NL80211_ATTR_CONN_FAILED_REASON,
NL80211_ATTR_VHT_CAPABILITY,
-@@ -2336,6 +2404,20 @@ enum nl80211_attrs {
+@@ -2332,10 +2537,39 @@ enum nl80211_attrs {
+ NL80211_ATTR_MESH_PEER_AID,
+
+ NL80211_ATTR_NAN_MASTER_PREF,
+- NL80211_ATTR_NAN_DUAL,
++ NL80211_ATTR_BANDS,
NL80211_ATTR_NAN_FUNC,
NL80211_ATTR_NAN_MATCH,
+
+ NL80211_ATTR_TIMEOUT_REASON,
+
++ NL80211_ATTR_FILS_ERP_USERNAME,
++ NL80211_ATTR_FILS_ERP_REALM,
++ NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM,
++ NL80211_ATTR_FILS_ERP_RRK,
++ NL80211_ATTR_FILS_CACHE_ID,
++
++ NL80211_ATTR_PMK,
++
++ NL80211_ATTR_SCHED_SCAN_MULTI,
++ NL80211_ATTR_SCHED_SCAN_MAX_REQS,
++
++ NL80211_ATTR_WANT_1X_4WAY_HS,
++ NL80211_ATTR_PMKR0_NAME,
++ NL80211_ATTR_PORT_AUTHORIZED,
++
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -2347,6 +2429,7 @@ enum nl80211_attrs {
+@@ -2347,6 +2581,7 @@ enum nl80211_attrs {
#define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION
#define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG
#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER
/*
* Allow user space programs to use #ifdef on new attributes by defining them
-@@ -3027,6 +3110,13 @@ enum nl80211_reg_rule_attr {
+@@ -3019,6 +3254,7 @@ enum nl80211_reg_rule_attr {
+ * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
+ * only report BSS with matching SSID.
++ * (This cannot be used together with BSSID.)
+ * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
+ * BSS in scan results. Filtering is turned off if not specified. Note that
+ * if this attribute is in a match set of its own, then it is treated as
+@@ -3027,6 +3263,15 @@ enum nl80211_reg_rule_attr {
* how this API was implemented in the past. Also, due to the same problem,
* the only way to create a matchset with only an RSSI filter (with this
* attribute) is if there's only a single matchset with the RSSI attribute.
+ * BSS-es in the specified band is to be adjusted before doing
+ * RSSI-based BSS selection. The attribute value is a packed structure
+ * value as specified by &struct nl80211_bss_select_rssi_adjust.
++ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching
++ * (this cannot be used together with SSID).
* @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
* attribute number currently defined
* @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
-@@ -3036,6 +3126,8 @@ enum nl80211_sched_scan_match_attr {
+@@ -3036,6 +3281,9 @@ enum nl80211_sched_scan_match_attr {
NL80211_SCHED_SCAN_MATCH_ATTR_SSID,
NL80211_SCHED_SCAN_MATCH_ATTR_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI,
+ NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST,
++ NL80211_SCHED_SCAN_MATCH_ATTR_BSSID,
/* keep last */
__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST,
-@@ -3660,6 +3752,9 @@ enum nl80211_bss_status {
+@@ -3660,6 +3908,9 @@ enum nl80211_bss_status {
* @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r)
* @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP)
* @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals
* @__NL80211_AUTHTYPE_NUM: internal
* @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm
* @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by
-@@ -3672,6 +3767,9 @@ enum nl80211_auth_type {
+@@ -3672,6 +3923,9 @@ enum nl80211_auth_type {
NL80211_AUTHTYPE_FT,
NL80211_AUTHTYPE_NETWORK_EAP,
NL80211_AUTHTYPE_SAE,
/* keep last */
__NL80211_AUTHTYPE_NUM,
-@@ -4280,6 +4378,9 @@ enum nl80211_iface_limit_attrs {
+@@ -3839,7 +4093,10 @@ enum nl80211_ps_state {
+ * @__NL80211_ATTR_CQM_INVALID: invalid
+ * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies
+ * the threshold for the RSSI level at which an event will be sent. Zero
+- * to disable.
++ * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is
++ * set, multiple values can be supplied as a low-to-high sorted array of
++ * threshold values in dBm. Events will be sent when the RSSI value
++ * crosses any of the thresholds.
+ * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies
+ * the minimum amount the RSSI level must change after an event before a
+ * new event may be issued (to reduce effects of RSSI oscillation).
+@@ -3859,6 +4116,8 @@ enum nl80211_ps_state {
+ * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting.
+ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon
+ * loss event
++ * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the
++ * RSSI threshold event.
+ * @__NL80211_ATTR_CQM_AFTER_LAST: internal
+ * @NL80211_ATTR_CQM_MAX: highest key attribute
+ */
+@@ -3872,6 +4131,7 @@ enum nl80211_attr_cqm {
+ NL80211_ATTR_CQM_TXE_PKTS,
+ NL80211_ATTR_CQM_TXE_INTVL,
+ NL80211_ATTR_CQM_BEACON_LOSS_EVENT,
++ NL80211_ATTR_CQM_RSSI_LEVEL,
+
+ /* keep last */
+ __NL80211_ATTR_CQM_AFTER_LAST,
+@@ -4280,6 +4540,9 @@ enum nl80211_iface_limit_attrs {
* of supported channel widths for radar detection.
* @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap
* of supported regulatory regions for radar detection.
* @NUM_NL80211_IFACE_COMB: number of attributes
* @MAX_NL80211_IFACE_COMB: highest attribute number
*
-@@ -4287,8 +4388,8 @@ enum nl80211_iface_limit_attrs {
+@@ -4287,8 +4550,8 @@ enum nl80211_iface_limit_attrs {
* limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2
* => allows an AP and a STA that must match BIs
*
*
* numbers = [ #{STA} <= 2 ], channels = 2, max = 2
* => allows two STAs on different channels
-@@ -4314,6 +4415,7 @@ enum nl80211_if_combination_attrs {
+@@ -4314,6 +4577,7 @@ enum nl80211_if_combination_attrs {
NL80211_IFACE_COMB_NUM_CHANNELS,
NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS,
NL80211_IFACE_COMB_RADAR_DETECT_REGIONS,
/* keep last */
NUM_NL80211_IFACE_COMB,
-@@ -4634,6 +4736,15 @@ enum nl80211_feature_flags {
+@@ -4634,6 +4898,27 @@ enum nl80211_feature_flags {
* configuration (AP/mesh) with HT rates.
* @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate
* configuration (AP/mesh) with VHT rates.
+ * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan
+ * for reporting BSSs with better RSSI than the current connected BSS
+ * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI).
++ * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the
++ * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more
++ * RSSI threshold values to monitor rather than exactly one threshold.
++ * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key
++ * authentication with %NL80211_CMD_CONNECT.
++ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way
++ * handshake with PSK in station mode (PSK is passed as part of the connect
++ * and associate commands), doing it in the host might not be supported.
++ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way
++ * handshake with 802.1X in station mode (will pass EAP frames to the host
++ * and accept the set_pmk/del_pmk commands), doing it in the host might not
++ * be supported.
*
* @NUM_NL80211_EXT_FEATURES: number of extended features.
* @MAX_NL80211_EXT_FEATURES: highest extended feature index.
-@@ -4648,6 +4759,10 @@ enum nl80211_ext_feature_index {
+@@ -4648,6 +4933,14 @@ enum nl80211_ext_feature_index {
NL80211_EXT_FEATURE_BEACON_RATE_LEGACY,
NL80211_EXT_FEATURE_BEACON_RATE_HT,
NL80211_EXT_FEATURE_BEACON_RATE_VHT,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA,
+ NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED,
+ NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI,
++ NL80211_EXT_FEATURE_CQM_RSSI_LIST,
++ NL80211_EXT_FEATURE_FILS_SK_OFFLOAD,
++ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK,
++ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X,
/* add new features before the definition below */
NUM_NL80211_EXT_FEATURES,
-@@ -4687,6 +4802,21 @@ enum nl80211_connect_failed_reason {
+@@ -4687,6 +4980,21 @@ enum nl80211_connect_failed_reason {
};
/**
* enum nl80211_scan_flags - scan request control flags
*
* Scan request control flags are used to control the handling
-@@ -4900,8 +5030,9 @@ enum nl80211_sched_scan_plan {
+@@ -4768,12 +5076,17 @@ enum nl80211_smps_mode {
+ * change to the channel status.
+ * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is
+ * over, channel becomes usable.
++ * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this
++ * non-operating channel is expired and no longer valid. New CAC must
++ * be done on this channel before starting the operation. This is not
++ * applicable for ETSI dfs domain where pre-CAC is valid for ever.
+ */
+ enum nl80211_radar_event {
+ NL80211_RADAR_DETECTED,
+ NL80211_RADAR_CAC_FINISHED,
+ NL80211_RADAR_CAC_ABORTED,
+ NL80211_RADAR_NOP_FINISHED,
++ NL80211_RADAR_PRE_CAC_EXPIRED,
+ };
+
+ /**
+@@ -4900,8 +5213,9 @@ enum nl80211_sched_scan_plan {
/**
* struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters.
*
*/
struct nl80211_bss_select_rssi_adjust {
__u8 band;
+@@ -4942,21 +5256,6 @@ enum nl80211_bss_select_attr {
+ };
+
+ /**
+- * enum nl80211_nan_dual_band_conf - NAN dual band configuration
+- *
+- * Defines the NAN dual band mode of operation
+- *
+- * @NL80211_NAN_BAND_DEFAULT: device default mode
+- * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode
+- * @NL80211_NAN_BAND_5GHZ: 5GHz mode
+- */
+-enum nl80211_nan_dual_band_conf {
+- NL80211_NAN_BAND_DEFAULT = 1 << 0,
+- NL80211_NAN_BAND_2GHZ = 1 << 1,
+- NL80211_NAN_BAND_5GHZ = 1 << 2,
+-};
+-
+-/**
+ * enum nl80211_nan_function_type - NAN function type
+ *
+ * Defines the function type of a NAN function
projects / openwrt / staging / chunkeey.git / blobdiff