--- a/nl80211.h
+++ b/nl80211.h
-@@ -1555,6 +1555,9 @@ enum nl80211_commands {
- * data is in the format defined for the payload of the QoS Map Set element
- * in IEEE Std 802.11-2012, 8.4.2.97.
+@@ -52,6 +52,11 @@
+ #define NL80211_MULTICAST_GROUP_NAN "nan"
+ #define NL80211_MULTICAST_GROUP_TESTMODE "testmode"
+
++#define NL80211_EDMG_BW_CONFIG_MIN 4
++#define NL80211_EDMG_BW_CONFIG_MAX 15
++#define NL80211_EDMG_CHANNELS_MIN 1
++#define NL80211_EDMG_CHANNELS_MAX 0x3c /* 0b00111100 */
++
+ /**
+ * DOC: Station handling
*
+@@ -2361,6 +2366,16 @@ enum nl80211_commands {
+ * @NL80211_ATTR_HE_OBSS_PD: nested attribute for OBSS Packet Detection
+ * functionality.
+ *
++ * @NL80211_ATTR_WIPHY_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
++ * channel(s) that are allowed to be used for EDMG transmissions.
++ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251. (u8 attribute)
++ * @NL80211_ATTR_WIPHY_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
++ * the allowed channel bandwidth configurations. (u8 attribute)
++ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
++ *
+ * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce
+ * transmit power to stay within regulatory limits. u32, dBi.
+ *
+ * @NUM_NL80211_ATTR: total number of nl80211_attrs available
* @NL80211_ATTR_MAX: highest attribute number currently defined
* @__NL80211_ATTR_AFTER_LAST: internal use
- */
-@@ -1883,6 +1886,8 @@ enum nl80211_attrs {
+@@ -2820,6 +2835,11 @@ enum nl80211_attrs {
- NL80211_ATTR_QOS_MAP,
+ NL80211_ATTR_HE_OBSS_PD,
++ NL80211_ATTR_WIPHY_EDMG_CHANNELS,
++ NL80211_ATTR_WIPHY_EDMG_BW_CONFIG,
++
+ NL80211_ATTR_WIPHY_ANTENNA_GAIN,
+
/* add attributes here, update the policy in nl80211.c */
__NL80211_ATTR_AFTER_LAST,
-@@ -2442,9 +2447,15 @@ enum nl80211_reg_rule_attr {
- * enum nl80211_sched_scan_match_attr - scheduled scan match attributes
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved
- * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching,
-- * only report BSS with matching SSID.
-+ * only report BSS with matching SSID.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a
-- * BSS in scan results. Filtering is turned off if not specified.
-+ * BSS in scan results. Filtering is turned off if not specified. Note that
-+ * if this attribute is in a match set of its own, then it is treated as
-+ * the default value for all matchsets with an SSID, rather than being a
-+ * matchset of its own without an RSSI filter. This is due to problems with
-+ * how this API was implemented in the past. Also, due to the same problem,
-+ * the only way to create a matchset with only an RSSI filter (with this
-+ * attribute) is if there's only a single matchset with the RSSI attribute.
- * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter
- * attribute number currently defined
- * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use
+@@ -3201,6 +3221,8 @@ enum nl80211_sta_bss_param {
+ * sent to the station (u64, usec)
+ * @NL80211_STA_INFO_AIRTIME_WEIGHT: current airtime weight for station (u16)
+ * @NL80211_STA_INFO_AIRTIME_LINK_METRIC: airtime link metric for mesh station
++ * @NL80211_STA_INFO_ASSOC_AT_BOOTTIME: Timestamp (CLOCK_BOOTTIME, nanoseconds)
++ * of STA's association
+ * @__NL80211_STA_INFO_AFTER_LAST: internal
+ * @NL80211_STA_INFO_MAX: highest possible station info attribute
+ */
+@@ -3247,6 +3269,7 @@ enum nl80211_sta_info {
+ NL80211_STA_INFO_TX_DURATION,
+ NL80211_STA_INFO_AIRTIME_WEIGHT,
+ NL80211_STA_INFO_AIRTIME_LINK_METRIC,
++ NL80211_STA_INFO_ASSOC_AT_BOOTTIME,
+
+ /* keep last */
+ __NL80211_STA_INFO_AFTER_LAST,
+@@ -3428,6 +3451,12 @@ enum nl80211_band_iftype_attr {
+ * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
+ * attributes from &enum nl80211_band_iftype_attr
++ * @NL80211_BAND_ATTR_EDMG_CHANNELS: bitmap that indicates the 2.16 GHz
++ * channel(s) that are allowed to be used for EDMG transmissions.
++ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251.
++ * @NL80211_BAND_ATTR_EDMG_BW_CONFIG: Channel BW Configuration subfield encodes
++ * the allowed channel bandwidth configurations.
++ * Defined by IEEE P802.11ay/D4.0 section 9.4.2.251, Table 13.
+ * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
+ * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
+ */
+@@ -3445,6 +3474,9 @@ enum nl80211_band_attr {
+ NL80211_BAND_ATTR_VHT_CAPA,
+ NL80211_BAND_ATTR_IFTYPE_DATA,
+
++ NL80211_BAND_ATTR_EDMG_CHANNELS,
++ NL80211_BAND_ATTR_EDMG_BW_CONFIG,
++
+ /* keep last */
+ __NL80211_BAND_ATTR_AFTER_LAST,
+ NL80211_BAND_ATTR_MAX = __NL80211_BAND_ATTR_AFTER_LAST - 1
+@@ -3843,6 +3875,8 @@ enum nl80211_user_reg_hint_type {
+ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan
+ * (on this channel or globally)
+ * @NL80211_SURVEY_INFO_PAD: attribute used for padding for 64-bit alignment
++ * @NL80211_SURVEY_INFO_TIME_BSS_RX: amount of time the radio spent
++ * receiving frames destined to the local BSS
+ * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number
+ * currently defined
+ * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use
+@@ -3859,6 +3893,7 @@ enum nl80211_survey_info {
+ NL80211_SURVEY_INFO_TIME_TX,
+ NL80211_SURVEY_INFO_TIME_SCAN,
+ NL80211_SURVEY_INFO_PAD,
++ NL80211_SURVEY_INFO_TIME_BSS_RX,
+
+ /* keep last */
+ __NL80211_SURVEY_INFO_AFTER_LAST,
+@@ -4543,6 +4578,7 @@ enum nl80211_txrate_gi {
+ * @NL80211_BAND_2GHZ: 2.4 GHz ISM band
+ * @NL80211_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
+ * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz)
++ * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz)
+ * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace
+ * since newer kernel versions may support more bands
+ */
+@@ -4550,6 +4586,7 @@ enum nl80211_band {
+ NL80211_BAND_2GHZ,
+ NL80211_BAND_5GHZ,
+ NL80211_BAND_60GHZ,
++ NL80211_BAND_6GHZ,
+
+ NUM_NL80211_BANDS,
+ };
projects / openwrt / staging / chunkeey.git / blobdiff