uqmi: use general method for state cleaning

[openwrt/staging/chunkeey.git] / package / network / utils / uqmi / files / lib / netifd / proto / qmi.sh

diff --git a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
index cab9cb91211f0f92ab31d292a90d62e163cd2c65..eba0922e57de8bc413a138de53175a1a713a2c92 100755 (executable)
--- a/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
+++ b/package/network/utils/uqmi/files/lib/netifd/proto/qmi.sh
@@ -21,16 +21,17 @@ proto_qmi_init_config() {
        proto_config_add_int profile
        proto_config_add_boolean dhcpv6
        proto_config_add_boolean autoconnect
+       proto_config_add_int plmn
        proto_config_add_defaults
 }
 
 proto_qmi_setup() {
        local interface="$1"
-
-       local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS
+       local dataformat
+       local device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn $PROTO_DEFAULT_OPTIONS
        local cid_4 pdh_4 cid_6 pdh_6
        local ip_6 ip_prefix_length gateway_6 dns1_6 dns2_6
-       json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect $PROTO_DEFAULT_OPTIONS
+       json_get_vars device apn auth username password pincode delay modes pdptype profile dhcpv6 autoconnect plmn $PROTO_DEFAULT_OPTIONS
 
        [ "$metric" = "" ] && metric="0"
 
@@ -64,11 +65,12 @@ proto_qmi_setup() {
        [ -n "$delay" ] && sleep "$delay"
 
        while uqmi -s -d "$device" --get-pin-status | grep '"UIM uninitialized"' > /dev/null; do
+               [ -e "$device" ] || return 1
                sleep 1;
        done
 
        [ -n "$pincode" ] && {
-               uqmi -s -d "$device" --verify-pin1 "$pincode" || {
+               uqmi -s -d "$device" --verify-pin1 "$pincode" > /dev/null || uqmi -s -d "$device" --uim-verify-pin1 "$pincode" > /dev/null || {
                        echo "Unable to verify PIN"
                        proto_notify_error "$interface" PIN_FAILED
                        proto_block_restart "$interface"
@@ -76,11 +78,49 @@ proto_qmi_setup() {
                }
        }
 
+       [ -n "$plmn" ] && {
+               local mcc mnc
+               if [ "$plmn" = 0 ]; then
+                       mcc=0
+                       mnc=0
+                       echo "Setting PLMN to auto"
+               else
+                       mcc=${plmn:0:3}
+                       mnc=${plmn:3}
+                       echo "Setting PLMN to $plmn"
+               fi
+               uqmi -s -d "$device" --set-plmn --mcc "$mcc" --mnc "$mnc" || {
+                       echo "Unable to set PLMN"
+                       proto_notify_error "$interface" PLMN_FAILED
+                       proto_block_restart "$interface"
+                       return 1
+               }
+       }
+
+       # Cleanup current state if any
+       uqmi -s -d "$device" --stop-network 0xffffffff --autoconnect
+
+       # Set IP format
        uqmi -s -d "$device" --set-data-format 802.3
        uqmi -s -d "$device" --wda-set-data-format 802.3
+       dataformat="$(uqmi -s -d "$device" --wda-get-data-format)"
+
+       if [ "$dataformat" = '"raw-ip"' ]; then
+
+               [ -f /sys/class/net/$ifname/qmi/raw_ip ] || {
+                       echo "Device only supports raw-ip mode but is missing this required driver attribute: /sys/class/net/$ifname/qmi/raw_ip"
+                       return 1
+               }
+
+               echo "Device does not support 802.3 mode. Informing driver of raw-ip only for $ifname .."
+               echo "Y" > /sys/class/net/$ifname/qmi/raw_ip
+       fi
+
+       uqmi -s -d "$device" --sync
 
        echo "Waiting for network registration"
        while uqmi -s -d "$device" --get-serving-system | grep '"searching"' > /dev/null; do
+               [ -e "$device" ] || return 1
                sleep 5;
        done
 
@@ -88,7 +128,7 @@ proto_qmi_setup() {
 
        echo "Starting network $interface"
 
-       pdptype=`echo "$pdptype" | awk '{print tolower($0)}'`
+       pdptype=$(echo "$pdptype" | awk '{print tolower($0)}')
        [ "$pdptype" = "ip" -o "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] || pdptype="ip"
 
        if [ "$pdptype" = "ip" ]; then
@@ -99,7 +139,7 @@ proto_qmi_setup() {
        fi
 
        [ "$pdptype" = "ip" -o "$pdptype" = "ipv4v6" ] && {
-               cid_4=`uqmi -s -d "$device" --get-client-id wds`
+               cid_4=$(uqmi -s -d "$device" --get-client-id wds)
                [ $? -ne 0 ] && {
                        echo "Unable to obtain client ID"
                        proto_notify_error "$interface" NO_CID
@@ -108,19 +148,14 @@ proto_qmi_setup() {
 
                uqmi -s -d "$device" --set-client-id wds,"$cid_4" --set-ip-family ipv4 > /dev/null
 
-               # try to clear previous autoconnect state
-               uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
-                       --stop-network 0xffffffff \
-                       --autoconnect > /dev/null
-
-               pdh_4=`uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
+               pdh_4=$(uqmi -s -d "$device" --set-client-id wds,"$cid_4" \
                        --start-network \
                        ${apn:+--apn $apn} \
                        ${profile:+--profile $profile} \
                        ${auth:+--auth-type $auth} \
                        ${username:+--username $username} \
                        ${password:+--password $password} \
-                       ${autoconnect:+--autoconnect}`
+                       ${autoconnect:+--autoconnect})
                [ $? -ne 0 ] && {
                        echo "Unable to connect IPv4"
                        uqmi -s -d "$device" --set-client-id wds,"$cid_4" --release-client-id wds
@@ -130,7 +165,7 @@ proto_qmi_setup() {
        }
 
        [ "$pdptype" = "ipv6" -o "$pdptype" = "ipv4v6" ] && {
-               cid_6=`uqmi -s -d "$device" --get-client-id wds`
+               cid_6=$(uqmi -s -d "$device" --get-client-id wds)
                [ $? -ne 0 ] && {
                        echo "Unable to obtain client ID"
                        proto_notify_error "$interface" NO_CID
@@ -139,19 +174,14 @@ proto_qmi_setup() {
 
                uqmi -s -d "$device" --set-client-id wds,"$cid_6" --set-ip-family ipv6 > /dev/null
 
-               # try to clear previous autoconnect state
-               uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
-                       --stop-network 0xffffffff \
-                       --autoconnect > /dev/null
-
-               pdh_6=`uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
+               pdh_6=$(uqmi -s -d "$device" --set-client-id wds,"$cid_6" \
                        --start-network \
                        ${apn:+--apn $apn} \
                        ${profile:+--profile $profile} \
                        ${auth:+--auth-type $auth} \
                        ${username:+--username $username} \
                        ${password:+--password $password} \
-                       ${autoconnect:+--autoconnect}`
+                       ${autoconnect:+--autoconnect})
                [ $? -ne 0 ] && {
                        echo "Unable to connect IPv6"
                        uqmi -s -d "$device" --set-client-id wds,"$cid_6" --release-client-id wds