/*
- * NETGEAR WNDR4300 board support
+ * NETGEAR WNDR3700v4/WNDR4300 board support
*
* Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
+ * Copyright (C) 2014 Ralph Perlich <rpsoft@arcor.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
+#include <linux/version.h>
#include <linux/pci.h>
#include <linux/phy.h>
#include <linux/gpio.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
#include <linux/ar8216_platform.h>
+#include <linux/mtd/mtd.h>
+#if LINUX_VERSION_CODE < KERNEL_VERSION(4,14,0)
+#include <linux/mtd/nand.h>
+#else
+#include <linux/mtd/rawnand.h>
+#endif
+#include <linux/platform/ar934x_nfc.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include "dev-wmac.h"
#include "machtypes.h"
+/* AR9344 GPIOs */
#define WNDR4300_GPIO_LED_POWER_GREEN 0
-#define WNDR4300_GPIO_LED_POWER_ORANGE 2
+#define WNDR4300_GPIO_LED_POWER_AMBER 2
#define WNDR4300_GPIO_LED_USB 13
#define WNDR4300_GPIO_LED_WAN_GREEN 1
-#define WNDR4300_GPIO_LED_WAN_ORANGE 3
+#define WNDR4300_GPIO_LED_WAN_AMBER 3
+#define WNDR4300_GPIO_LED_WLAN2G 11
#define WNDR4300_GPIO_LED_WLAN5G 14
#define WNDR4300_GPIO_LED_WPS_GREEN 16
-#define WNDR4300_GPIO_LED_WPS_ORANGE 17
+#define WNDR4300_GPIO_LED_WPS_AMBER 17
#define WNDR4300_GPIO_BTN_RESET 21
#define WNDR4300_GPIO_BTN_WIRELESS 15
#define WNDR4300_GPIO_BTN_WPS 12
+/* AR9580 GPIOs */
+#define WNDR4300_GPIO_USB_5V 0
+
#define WNDR4300_KEYS_POLL_INTERVAL 20 /* msecs */
#define WNDR4300_KEYS_DEBOUNCE_INTERVAL (3 * WNDR4300_KEYS_POLL_INTERVAL)
.active_low = 1,
},
{
- .name = "netgear:orange:power",
- .gpio = WNDR4300_GPIO_LED_POWER_ORANGE,
+ .name = "netgear:amber:power",
+ .gpio = WNDR4300_GPIO_LED_POWER_AMBER,
.active_low = 1,
},
{
.active_low = 1,
},
{
- .name = "netgear:orange:wan",
- .gpio = WNDR4300_GPIO_LED_WAN_ORANGE,
+ .name = "netgear:amber:wan",
+ .gpio = WNDR4300_GPIO_LED_WAN_AMBER,
.active_low = 1,
},
{
.active_low = 1,
},
{
- .name = "netgear:orange:wps",
- .gpio = WNDR4300_GPIO_LED_WPS_ORANGE,
+ .name = "netgear:amber:wps",
+ .gpio = WNDR4300_GPIO_LED_WPS_AMBER,
+ .active_low = 1,
+ },
+ {
+ .name = "netgear:green:wlan2g",
+ .gpio = WNDR4300_GPIO_LED_WLAN2G,
.active_low = 1,
},
{
static struct gpio_keys_button wndr4300_gpio_keys[] __initdata = {
{
- .desc = "Reset button",
+ .desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
.active_low = 1,
},
{
- .desc = "WPS button",
+ .desc = "wps",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
.active_low = 1,
},
{
- .desc = "Wireless button",
+ .desc = "rfkill",
.type = EV_KEY,
- .code = BTN_0,
+ .code = KEY_RFKILL,
.debounce_interval = WNDR4300_KEYS_DEBOUNCE_INTERVAL,
.gpio = WNDR4300_GPIO_BTN_WIRELESS,
.active_low = 1,
};
static struct ar8327_led_cfg wndr4300_ar8327_led_cfg = {
- .led_ctrl0 = 0xc737c737,
- .led_ctrl1 = 0x00000000,
+ .led_ctrl0 = 0xcc35cc35,
+ .led_ctrl1 = 0xcb37cb37,
.led_ctrl2 = 0x00000000,
- .led_ctrl3 = 0x0030c300,
- .open_drain = false,
+ .led_ctrl3 = 0x00f3cf00,
+ .open_drain = true,
};
static struct ar8327_platform_data wndr4300_ar8327_data = {
.pad0_cfg = &wndr4300_ar8327_pad0_cfg,
- .cpuport_cfg = {
+ .port0_cfg = {
.force_link = 1,
.speed = AR8327_PORT_SPEED_1000,
.duplex = 1,
static struct mdio_board_info wndr4300_mdio0_info[] = {
{
.bus_id = "ag71xx-mdio.0",
- .phy_addr = 0,
+ .mdio_addr = 0,
.platform_data = &wndr4300_ar8327_data,
},
};
static void __init wndr4300_setup(void)
{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(wndr4300_leds_gpio); i++)
+ ath79_gpio_output_select(wndr4300_leds_gpio[i].gpio,
+ AR934X_GPIO_OUT_GPIO);
+
ath79_register_leds_gpio(-1, ARRAY_SIZE(wndr4300_leds_gpio),
wndr4300_leds_gpio);
ath79_register_gpio_keys_polled(-1, WNDR4300_KEYS_POLL_INTERVAL,
ath79_eth0_pll_data.pll_1000 = 0x06000000;
ath79_register_eth(0);
+ ath79_nfc_set_ecc_mode(AR934X_NFC_ECC_HW);
ath79_register_nfc();
ath79_register_usb();
ath79_register_wmac_simple();
+
+ /* enable power for the USB port */
+ ap9x_pci_setup_wmac_gpio(0, BIT(WNDR4300_GPIO_USB_5V),
+ BIT(WNDR4300_GPIO_USB_5V));
+
ap91_pci_init_simple();
}
+MIPS_MACHINE(ATH79_MACH_WNDR3700_V4, "WNDR3700_V4", "NETGEAR WNDR3700v4",
+ wndr4300_setup);
MIPS_MACHINE(ATH79_MACH_WNDR4300, "WNDR4300", "NETGEAR WNDR4300",
wndr4300_setup);