lantiq: fix console print
[openwrt/staging/chunkeey.git] / target / linux / lantiq / dts / ARV4520PW.dts
index 299d13c4d4408fa5d868cf2c270db7d970cc8d08..030e316c87091bbc6ac0cf3ac36f260425731eea 100644 (file)
@@ -1,23 +1,25 @@
 /dts-v1/;
 
-/include/ "danube.dtsi"
+#include "danube.dtsi"
+
+#include <dt-bindings/input/input.h>
 
 / {
        model = "ARV4520PW - Easybox 800, WAV-281";
 
        chosen {
-               bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
+               bootargs = "console=ttyLTQ0,115200";
+       };
 
-               leds {
-                       boot = &power_blue;
-                       failsafe = &power_red;
-                       running = &power_blue;
+       aliases {
+               led-boot = &power_blue;
+               led-failsafe = &power_red;
+               led-running = &power_blue;
 
-                       dsl = &dsl;
-                       internet = &internet_blue;
-                       usb = &usb;
-                       wifi = &wifi;
-               };
+               led-dsl = &dsl;
+               led-internet = &internet_blue;
+               led-usb = &usb;
+               led-wifi = &wifi;
        };
 
        memory@0 {
@@ -27,8 +29,8 @@
        sram@1F000000 {
                vmmc@107000 {
                        status = "okay";
-                       gpios = <&gpio 31 0
-                               &gpiomm 7 0>;
+                       gpios = <&gpio 31 GPIO_ACTIVE_HIGH
+                               &gpiomm 7 GPIO_ACTIVE_HIGH>;
                };
        };
 
@@ -63,7 +65,7 @@
                                                reg = <0x30000 0x3c0000>;
                                        };
 
-                                       partition@7f0000 {
+                                       boardconfig: partition@7f0000 {
                                                label = "boardconfig";
                                                reg = <0x3f0000 0x10000>;
                                                read-only;
                                };
                        };
 
-                       mac_addr {
-                               compatible = "lantiq,eth-mac";
-                               reg = <0 0x3f0016 0x6>;
-                               mac-increment = <2>;
-                       };
-
                        gpiomm: gpiomm@4000000 {
                                compatible = "lantiq,gpio-mm";
                                reg = <1 0x0 0x10 >;
 
                etop@E180000 {
                        phy-mode = "rmii";
+                       mtd-mac-address = <&boardconfig 0x16>;
                };
 
                ifxhcd@E101000 {
                        status = "okay";
-                        gpios = <&gpio 28 0>;
+                       gpios = <&gpio 28 GPIO_ACTIVE_HIGH>;
                };
 
                pci@E105400 {
                        status = "okay";
                        lantiq,external-clock;
-                       gpio-reset = <&gpio 21 0>;
+                       gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
                };
-
        };
 
 // gpiomm 10 - switch
 
                rfkill {
                        label = "wps";
-                       gpios = <&gpio 29 1>;
-                       linux,code = <0x211>;
+                       gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_WPS_BUTTON>;
                };
                reset {
                        label = "reset";
-                       gpios = <&gpio 30 1>;
-                       linux,code = <0x198>;
+                       gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
+                       linux,code = <KEY_RESTART>;
                };
        };
 
 
                power_blue: power {
                        label = "arv4520pw:blue:power";
-                       gpios = <&gpio 3 1>;
+                       gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
                        default-state = "keep";
                };
                dsl: dsl {
                        label = "arv4520pw:blue:dsl";
-                       gpios = <&gpio 4 1>;
+                       gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
                };
                internet_blue: internet {
                        label = "arv4520pw:blue:internet";
-                       gpios = <&gpio 5 1>;
+                       gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
                };
                power_red: power2 {
                        label = "arv4520pw:red:power";
-                       gpios = <&gpio 6 1>;
+                       gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
                };
                wps {
                        label = "arv4520pw:yellow:wps";
-                       gpios = <&gpio 7 1>;
+                       gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
                };
                wps2 {
                        label = "arv4520pw:red:wps";
-                       gpios = <&gpio 9 1>;
+                       gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
                };
                /*
                        wps green is missing
                */
                fxs1 {
                        label = "arv4520pw:blue:telefon1";
-                       gpios = <&gpiomm 0 1>;
+                       gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
                };
                fxs2 {
                        label = "arv4520pw:blue:telefon2";
-                       gpios = <&gpiomm 1 1>;
+                       gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
                };
                isdn {
                        label = "arv4520pw:blue:isdn";
-                       gpios = <&gpiomm 2 1>;
+                       gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
                };
                fxo {
                        label = "arv4520pw:blue:line";
-                       gpios = <&gpiomm 3 1>;
+                       gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
                };
                voice {
                        label = "arv4520pw:blue:sprache";
-                       gpios = <&gpiomm 4 1>;
+                       gpios = <&gpiomm 4 GPIO_ACTIVE_LOW>;
                };
                usb: usb {
                        label = "arv4520pw:blue:usb";
-                       gpios = <&gpiomm 5 1>;
+                       gpios = <&gpiomm 5 GPIO_ACTIVE_LOW>;
                };
                wifi: wifi {
                        label = "arv4520pw:blue:wifi";
-                       gpios = <&gpiomm 6 1>;
+                       gpios = <&gpiomm 6 GPIO_ACTIVE_LOW>;
                };
                internet2 {
                        label = "arv4520pw:red:internet";
-                       gpios = <&gpiomm 9 1>;
+                       gpios = <&gpiomm 9 GPIO_ACTIVE_LOW>;
                };
                /*
                        info is missing