mvebu: add support for the Linksys Caiman and Cobra

[openwrt/staging/chunkeey.git] / target / linux / mvebu / config-3.18

diff --git a/target/linux/mvebu/config-3.18 b/target/linux/mvebu/config-3.18
index 9b2b4800fe96194041fecf0ce4edfe0bb96bc8a0..a5eac432de974bab9d33286e17659afd2ea177c0 100644 (file)
--- a/target/linux/mvebu/config-3.18
+++ b/target/linux/mvebu/config-3.18
@@ -11,7 +11,6 @@ CONFIG_ARCH_MULTIPLATFORM=y
 CONFIG_ARCH_MULTI_V6_V7=y
 CONFIG_ARCH_MULTI_V7=y
 CONFIG_ARCH_MVEBU=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
 CONFIG_ARCH_NR_GPIO=0
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
@@ -142,6 +141,7 @@ CONFIG_GPIOLIB=y
 CONFIG_GPIO_DEVRES=y
 CONFIG_GPIO_GENERIC=y
 CONFIG_GPIO_MVEBU=y
+CONFIG_GPIO_MVEBU_PWM=y
 CONFIG_GPIO_SYSFS=y
 CONFIG_HANDLE_DOMAIN_IRQ=y
 CONFIG_HARDIRQS_SW_RESEND=y
@@ -205,8 +205,8 @@ CONFIG_IRQ_DOMAIN_DEBUG=y
 CONFIG_IRQ_FORCED_THREADING=y
 CONFIG_IRQ_WORK=y
 # CONFIG_IWMMXT is not set
-CONFIG_KERNFS=y
 CONFIG_LEDS_GPIO=y
+# CONFIG_LEDS_REGULATOR is not set
 CONFIG_LIBFDT=y
 CONFIG_LOG_BUF_SHIFT=14
 CONFIG_LZO_COMPRESS=y
@@ -219,6 +219,7 @@ CONFIG_MACH_ARMADA_XP=y
 CONFIG_MACH_MVEBU_ANY=y
 CONFIG_MACH_MVEBU_V7=y
 CONFIG_MAGIC_SYSRQ=y
+CONFIG_MANGLE_BOOTARGS=y
 CONFIG_MARVELL_PHY=y
 CONFIG_MDIO_BOARDINFO=y
 CONFIG_MEMORY=y
@@ -231,13 +232,14 @@ CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_PXA3xx=y
 CONFIG_MTD_SPI_NOR=y
-CONFIG_MTD_SPLIT_SUPPORT=y
+CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_UBI=y
 CONFIG_MTD_UBI_BEB_LIMIT=20
 CONFIG_MTD_UBI_BLOCK=y
 # CONFIG_MTD_UBI_FASTMAP is not set
 # CONFIG_MTD_UBI_GLUEBI is not set
 CONFIG_MTD_UBI_WL_THRESHOLD=4096
+CONFIG_MTD_UIMAGE_SPLIT=y
 CONFIG_MULTI_IRQ_HANDLER=y
 CONFIG_MUTEX_SPIN_ON_OWNER=y
 CONFIG_MVEBU_CLK_COMMON=y
@@ -252,6 +254,7 @@ CONFIG_MV_XOR=y
 CONFIG_NEED_DMA_MAP_STATE=y
 # CONFIG_NEON is not set
 CONFIG_NET_FLOW_LIMIT=y
+CONFIG_NOP_USB_XCEIV=y
 CONFIG_NO_BOOTMEM=y
 CONFIG_NR_CPUS=4
 CONFIG_OF=y
@@ -292,10 +295,20 @@ CONFIG_PJ4B_ERRATA_4742=y
 CONFIG_PLAT_ORION=y
 CONFIG_PM_OPP=y
 # CONFIG_PREEMPT_RCU is not set
+CONFIG_PWM=y
+# CONFIG_PWM_FSL_FTM is not set
+CONFIG_PWM_SYSFS=y
 CONFIG_RCU_STALL_COMMON=y
+CONFIG_REGMAP=y
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+# CONFIG_REGULATOR_PWM is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y
 CONFIG_RTC_CLASS=y
+# CONFIG_RTC_DRV_ARMADA38X is not set
 # CONFIG_RTC_DRV_MV is not set
 CONFIG_RWSEM_SPIN_ON_OWNER=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
@@ -325,6 +338,7 @@ CONFIG_UBIFS_FS_XZ=y
 CONFIG_UBIFS_FS_ZLIB=y
 CONFIG_UID16=y
 CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h"
+CONFIG_USB_PHY=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USE_OF=y
 CONFIG_VECTORS_BASE=0xffff0000