ramips: add support for MikroTik RouterBOARD RBM11g

[openwrt/staging/chunkeey.git] / target / linux / ramips / base-files / etc / board.d / 01_leds

diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index a9a68f6eef7ca0960f19861616f3e27d9f6a80b5..b424c759dbd7dbba2936241b4aa8086d4d04cc51 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -168,6 +168,7 @@ dlink,dwr-921-c1)
        ucidef_set_led_default "sigstrength" "Signal Strength" "$boardname:green:sigstrength" "0"
        ;;
 dir-810l|\
+elecom,wrc-1167ghbk2-s|\
 iodata,wn-gx300gr|\
 mzk-750dhp|\
 mzk-dp150n|\
@@ -261,6 +262,14 @@ m2m)
        set_wifi_led "$boardname:blue:wifi"
        ucidef_set_led_netdev "eth" "Ethernet" "$boardname:green:wan" "eth0"
        ;;
+mikrotik,rbm11g)
+       ucidef_set_rssimon "wlan0" "200000" "1"
+       ucidef_set_led_rssi "rssilow" "RSSILOW" "$boardname:green:rssi0" "wlan0" "1" "100"
+       ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "$boardname:green:rssi1" "wlan0" "20" "100"
+       ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "$boardname:green:rssi2" "wlan0" "40" "100"
+       ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "$boardname:green:rssi3" "wlan0" "60" "100"
+       ucidef_set_led_rssi "rssiveryhigh" "RSSIVERYHIGH" "$boardname:green:rssi4" "wlan0" "80" "100"
+       ;;
 miniembplug)
        set_wifi_led "$boardname:red:wlan"
        set_usb_led "$boardname:green:mobile"
@@ -397,6 +406,12 @@ tl-wr841n-v13)
        ucidef_set_led_switch "lan4" "lan4" "$boardname:green:lan4" "switch0" "0x10"
        ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch0" "0x01"
        ;;
+tplink,c2-v1)
+       ucidef_set_led_switch "lan" "lan" "$boardname:green:lan" "switch1" "0x1e"
+       ucidef_set_led_switch "wan" "wan" "$boardname:green:wan" "switch1" "0x01"
+       set_usb_led "$boardname:green:usb" "2-1"
+       set_wifi_led "$boardname:green:wlan"
+       ;;
 tplink,c20-v1)
        ucidef_set_led_switch "lan" "lan" "$boardname:blue:lan" "switch0" "0x1e"
        ucidef_set_led_switch "wan" "wan" "$boardname:blue:wan" "switch0" "0x01"