ramips: add support for Planex MZK-DP150N

[openwrt/staging/chunkeey.git] / target / linux / ramips / base-files / etc / board.d / 02_network

diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 45720c3ab5c670c3748ab98a6df5f3c7797da4a3..f896afafeee30971aa3a241cc46f3c79495a7d2b 100755 (executable)
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -43,13 +43,18 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "1" "0 6t"
                ;;
 
+       3g150b | \
        3g300m | \
+       microwrt | \
        w150m | \
+       zte-q7 | \
        all0256n | \
        all5002 | \
        all5003 | \
        broadway | \
        dcs-930| \
+       dcs-930l-b1| \
+       ht-tm02| \
        ncs601w | \
        wnce2001)
                ucidef_add_switch "switch0" "1" "0"
@@ -57,9 +62,18 @@ ramips_setup_interfaces()
                ;;
 
        3g-6200nl | \
-       mlw221)
-                ucidef_set_interface_lan "eth0.2"
-                ;;
+       mlw221 | \
+       mr-102n)
+               ucidef_set_interface_lan "eth0.2"
+               ;;
+       mlwg2)
+               ucidef_set_interface_lan "eth0.1"
+               ;;
+
+       m2m)
+               ucidef_add_switch "switch0" "4"
+               ucidef_set_interface_lan "eth0"
+               ;;
 
        wizard8800 | \
        wl-330n | \
@@ -90,12 +104,19 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "0 9t"
                ;;
 
+        re6500 | \
        asl26555)
                ucidef_set_interface_lan "eth0.1"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 6t"
                ;;
 
+       cf-wr800n)
+               ucidef_set_interface_lan "eth0.1"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "4 6t"
+               ;;
+
        cy-swr1100)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
@@ -103,17 +124,14 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "4 9t"
                ;;
 
-       ht-tm02)
-               ucidef_set_interface_lan "eth0.1"
-               ucidef_add_switch "switch0" "1" "1"
-               ucidef_add_switch_vlan "switch0" "1" "4 6t"
-               ;;
-
        3g-6200n | \
+       ai-br100 | \
        dir-610-a1 | \
        dir-300-b7 | \
        dir-320-b1 | \
        dir-615-h1 | \
+       firewrt | \
+       pbr-m1 | \
        hlk-rm04 | \
        mt7621 | \
        mt7628 | \
@@ -121,9 +139,12 @@ ramips_setup_interfaces()
        mzk-750dhp | \
        whr-300hp2 | \
        whr-600d | \
+       oy-0001 | \
        wsr-600 | \
        wsr-1166 | \
-       wt1520)
+       wt1520 | \
+       xiaomi-miwifi-mini |\
+       y1)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
                ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
@@ -141,6 +162,7 @@ ramips_setup_interfaces()
        awm003-evb | \
        argus-atp52b | \
        dir-645 | \
+       dir-860l-b1 | \
        f5d8235-v1 | \
        f5d8235-v2 | \
        hg255d | \
@@ -212,7 +234,6 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch0" "2" "4 6t"
                ;;
 
-       y1 |\
        y1s)
                ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
                ucidef_add_switch "switch0" "1" "1"
@@ -234,6 +255,19 @@ ramips_setup_interfaces()
                ucidef_add_switch_vlan "switch1" "2" "4 6t"
                ;;
 
+       wzr-agl300nh)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+               ucidef_add_switch_vlan "switch0" "2" "0 5t"
+               ;;
+
+       mzk-dp150n)
+               ucidef_set_interface_lan "eth0.1"
+               ucidef_add_switch "switch0" "1" "1"
+               ucidef_add_switch_vlan "switch0" "1" "0 4 6t"
+               ;;
+
        *)
                RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
                if [ -n "${RT3X5X}" ]; then
@@ -257,6 +291,11 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary devdata 7)
                ;;
 
+       oy-0001)
+               lan_mac=$(mtd_get_mac_binary factory 40)
+               wan_mac=$(mtd_get_mac_binary factory 46)
+               ;;
+
        w306r-v20)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 5)
@@ -290,7 +329,6 @@ ramips_setup_macs()
        hlk-rm04 | \
        mpr-a1 | \
        mpr-a2 | \
-        ht-tm02 | \
        dir-300-b7 | \
        dir-320-b1 | \
        psr-680w |\
@@ -302,6 +340,10 @@ ramips_setup_macs()
                wan_mac=$(macaddr_add "$lan_mac" 1)
                ;;
 
+       ht-tm02)
+               lan_mac=$(cat /sys/class/net/eth0/address)
+               ;;
+
        cy-swr1100 | \
        dir-645)
                lan_mac=$(mtd_get_mac_ascii nvram lanmac)
@@ -313,7 +355,7 @@ ramips_setup_macs()
                ;;
 
        wcr-150gn)
-                wan_mac=$(mtd_get_mac_binary factory 40)
+               wan_mac=$(mtd_get_mac_binary factory 40)
                ;;
 
        rt-n56u)
@@ -330,6 +372,15 @@ ramips_setup_macs()
                wan_mac=$(mtd_get_mac_binary factory 46)
                ;;
 
+       wsr-600|whr-300hp2|whr-600d|whr-1166d)
+               wan_mac=$(mtd_get_mac_binary factory 4)
+               lan_mac=$wan_mac
+               ;;
+       wsr-1166)
+               local index="$(find_mtd_index "board_data")"
+               wan_mac="$(grep -m1 mac= "/dev/mtd${index}" | cut -d= -f2)"
+               lan_mac=$wan_mac
+               ;;
        *)
                lan_mac=$(cat /sys/class/net/eth0/address)
                wan_mac=$(macaddr_add "$lan_mac" 1)