ramips: add support for ZBT-WE1326

[openwrt/staging/chunkeey.git] / target / linux / ramips / dts / ZBT-WG3526.dts

diff --git a/target/linux/ramips/dts/ZBT-WG3526.dts b/target/linux/ramips/dts/ZBT-WG3526.dts
index 064eb1c17b8c7f1c609cd3e7b004aeed8410fb7b..c361bdd827bffdc24405b1a1b191403ebeec46d0 100644 (file)
--- a/target/linux/ramips/dts/ZBT-WG3526.dts
+++ b/target/linux/ramips/dts/ZBT-WG3526.dts
@@ -1,126 +1,15 @@
 /dts-v1/;
 
-#include "mt7621.dtsi"
+#include "ZBT-WG3526.dtsi"
 
 / {
-       compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
        model = "ZBT-WG3526";
-
-       memory@0 {
-               device_type = "memory";
-               reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
-       };
-
-       chosen {
-               bootargs = "console=ttyS0,115200";
-       };
-
-       palmbus: palmbus@1E000000 {
-               i2c@900 {
-                       compatible = "ralink,i2c-mt7621";
-                       reg = <0x900 0x100>;
-                       #address-cells = <1>;
-                       #size-cells = <0>;
-                       pinctrl-names = "default";
-                       pinctrl-0 = <&i2c_pins>;
-                       status = "okay";
-               };
-       };
-
-       gpio-keys-polled {
-               compatible = "gpio-keys-polled";
-               #address-cells = <1>;
-               #size-cells = <0>;
-               poll-interval = <20>;
-
-               reset {
-                       label = "reset";
-                       gpios = <&gpio0 18 1>;
-                       linux,code = <0x198>;
-               };
-       };
-
-       gpio-leds {
-               compatible = "gpio-leds";
-
-               status {
-                       label = "zbt-wg3526:green:status";
-                       gpios = <&gpio0 24 1>;
-               };
-       };
-};
-
-&sdhci {
-       status = "okay";
-};
-
-&spi0 {
-       status = "okay";
-
-       m25p80@0 {
-               #address-cells = <1>;
-               #size-cells = <1>;
-               compatible = "jedec,spi-nor";
-               reg = <0 0>;
-               linux,modalias = "m25p80";
-               spi-max-frequency = <10000000>;
-
-               partition@0 {
-                       label = "u-boot";
-                       reg = <0x0 0x30000>;
-                       read-only;
-               };
-
-               partition@30000 {
-                       label = "u-boot-env";
-                       reg = <0x30000 0x10000>;
-                       read-only;
-               };
-
-               factory: partition@40000 {
-                       label = "factory";
-                       reg = <0x40000 0x10000>;
-                       read-only;
-               };
-
-               partition@50000 {
-                       label = "firmware";
-                       reg = <0x50000 0xfb0000>;
-               };
-       };
-};
-
-&pcie {
-       status = "okay";
-
-       pcie0 {
-               mt76@0,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x0000>;
-                       mediatek,5ghz = <0>;
-               };
-       };
-
-       pcie1 {
-               mt76@1,0 {
-                       reg = <0x0000 0 0 0 0>;
-                       device_type = "pci";
-                       mediatek,mtd-eeprom = <&factory 0x8000>;
-                       mediatek,2ghz = <0>;
-               };
-       };
 };
 
-&ethernet {
-       mtd-mac-address = <&factory 0xe000>;
+&firmware {
+       reg = <0x50000 0xfb0000>;
 };
 
-&pinctrl {
-       state_default: pinctrl0 {
-               gpio {
-                       ralink,group = "wdt", "rgmii2", "wdt rst", "jtag", "mdio";
-                       ralink,function = "gpio";
-               };
-       };
+&status_led {
+       label = "zbt-wg3526:green:status";
 };