ar71xx: Add eTactica EG-200 support
authorKarl Palsson <karlp@etactica.com>
Thu, 26 May 2016 11:20:53 +0000 (11:20 +0000)
committerJohn Crispin <john@phrozen.org>
Tue, 13 Feb 2018 09:01:53 +0000 (10:01 +0100)
commitb2a5f7683b0d36b2a346c67a0dcf9140498b7f92
treecadaf7fc9a377bba01846c35ee740330e016991e
parentda8990e717e1e8704e08c1f75484352397c22231
ar71xx: Add eTactica EG-200 support

EG-200 is a DIN rail mountable device with one ethernet port, wifi,
an RS-485 port, and an internal USB attached uSD card reader.

Two leds, "modbus" and "etactica" are managed by userspace applications
in factory firmware.

Flash instruction:
    Original firmware is based on OpenWrt.
    Use sysupgrade image directly in vendor GUI.

Signed-off-by: Karl Palsson <karlp@etactica.com>
13 files changed:
package/boot/uboot-envtools/files/ar71xx
target/linux/ar71xx/base-files/etc/board.d/01_leds
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/config-4.4
target/linux/ar71xx/config-4.9
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-rme-eg200.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/generic/config-default
target/linux/ar71xx/image/generic.mk