brcm47xx: fix switch config for devices with WAN port 0

Commit r47866 dropped default values which were handling WAN interface
at port 0. Fix it by handling 2 more cases on NVRAM values.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 47932

diff --git a/target/linux/brcm47xx/base-files/etc/board.d/01_detect b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
index 841aafac35612c72cb173288413c14fbc8d5c59a..76ceac65fa86134d27d81dcf40008905340a842c 100755 (executable)
--- a/target/linux/brcm47xx/base-files/etc/board.d/01_detect
+++ b/target/linux/brcm47xx/base-files/etc/board.d/01_detect
@@ -17,6 +17,13 @@ detect_by_vlanports() {
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "8@eth0"
 
+       elif [ "${vlan0ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
+            [ "${vlan1ports:0:9}" = "1 2 3 4 8" -a "${vlan2ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ] || \
+            [ "${vlan2ports:0:9}" = "1 2 3 4 8" -a "${vlan1ports:0:3}" = "0 8" -a ${cpuport:-0} -eq 8 ];
+       then
+               ucidef_add_switch "switch0" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "8@eth0"
+
        elif [ "${vlan0ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
                 [ "${vlan1ports:0:9}" = "0 1 2 3 5" -a "${vlan2ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ] || \
                 [ "${vlan2ports:0:9}" = "0 1 2 3 5" -a "${vlan1ports:0:3}" = "4 5" -a ${cpuport:-0} -eq 5 ];
@@ -24,6 +31,13 @@ detect_by_vlanports() {
                ucidef_add_switch "switch0" \
                        "0:lan" "1:lan" "2:lan" "3:lan" "4:wan" "5@eth0"
 
+       elif [ "${vlan0ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
+            [ "${vlan1ports:0:9}" = "1 2 3 4 5" -a "${vlan2ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ] || \
+            [ "${vlan2ports:0:9}" = "1 2 3 4 5" -a "${vlan1ports:0:3}" = "0 5" -a ${cpuport:-0} -eq 5 ];
+       then
+               ucidef_add_switch "switch0" \
+                       "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+
        else
                logger -t "01_detect" "Unable to determine network configuration"
                ucidef_set_interface_lan "eth0"