ipq806x: add db149 dts files
authorJohn Crispin <john@openwrt.org>
Tue, 21 Apr 2015 07:15:37 +0000 (07:15 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 21 Apr 2015 07:15:37 +0000 (07:15 +0000)
DB149 is an IPQ806x based development platform. This patch adds the dts
files to support it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45536

target/linux/ipq806x/patches-3.18/022-add-db149-dts.patch [new file with mode: 0644]
target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch [new file with mode: 0644]

diff --git a/target/linux/ipq806x/patches-3.18/022-add-db149-dts.patch b/target/linux/ipq806x/patches-3.18/022-add-db149-dts.patch
new file mode 100644 (file)
index 0000000..9a036fb
--- /dev/null
@@ -0,0 +1,293 @@
+From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Tue, 7 Apr 2015 19:58:58 -0700
+Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
+
+Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
+SATA, USB2, USB3 and NOR flash.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ arch/arm/boot/dts/Makefile               |   1 +
+ arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++
+ 2 files changed, 258 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 38c89ca..745360a 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+       qcom-apq8084-ifc6540.dtb \
+       qcom-apq8084-mtp.dtb \
+       qcom-ipq8064-ap148.dtb \
++      qcom-ipq8064-db149.dtb \
+       qcom-msm8660-surf.dtb \
+       qcom-msm8960-cdp.dtb \
+       qcom-msm8974-sony-xperia-honami.dtb
+diff --git a/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+new file mode 100644
+index 0000000..224c54f
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+@@ -0,0 +1,257 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++
++/ {
++      model = "Qualcomm IPQ8064/DB149";
++      compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
++
++      reserved-memory {
++              #address-cells = <1>;
++              #size-cells = <1>;
++              ranges;
++              rsvd@41200000 {
++                      reg = <0x41200000 0x300000>;
++                      no-map;
++              };
++      };
++
++      alias {
++              serial0 = &uart2;
++      };
++
++      chosen {
++              linux,stdout-path = "serial0:115200n8";
++      };
++
++      aliases {
++              mdio-gpio0 = &mdio0;
++      };
++
++      soc {
++              pinmux@800000 {
++                      pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>;
++                      pinctrl-names = "default";
++
++                      i2c4_pins: i2c4_pinmux {
++                              pins = "gpio12", "gpio13";
++                              function = "gsbi4";
++                              bias-disable;
++                      };
++
++                      spi_pins: spi_pins {
++                              mux {
++                                      pins = "gpio18", "gpio19", "gpio21";
++                                      function = "gsbi5";
++                                      drive-strength = <10>;
++                                      bias-none;
++                              };
++                      };
++
++                      mdio0_pins: mdio0_pins {
++                              mux {
++                                      pins = "gpio0", "gpio1";
++                                      function = "gpio";
++                                      drive-strength = <8>;
++                                      bias-disable;
++                              };
++                      };
++
++                      rgmii0_pinmux: rgmii0_pinmux {
++                              mux {
++                                      pins = "gpio2", "gpio66";
++                                      drive-strength = <8>;
++                                      bias-disable;
++                              };
++                      };
++              };
++
++              gsbi2: gsbi@12480000 {
++                      qcom,mode = <GSBI_PROT_I2C_UART>;
++                      status = "ok";
++                      uart2: serial@12490000 {
++                              status = "ok";
++                      };
++              };
++
++              gsbi5: gsbi@1a200000 {
++                      qcom,mode = <GSBI_PROT_SPI>;
++                      status = "ok";
++
++                      spi4: spi@1a280000 {
++                              status = "ok";
++                              spi-max-frequency = <50000000>;
++
++                              pinctrl-0 = <&spi_pins>;
++                              pinctrl-names = "default";
++
++                              cs-gpios = <&qcom_pinmux 20 0>;
++
++                              flash: m25p80@0 {
++                                      compatible = "s25fl256s1";
++                                      #address-cells = <1>;
++                                      #size-cells = <1>;
++                                      spi-max-frequency = <50000000>;
++                                      reg = <0>;
++                                      m25p,fast-read;
++
++                                      partition@0 {
++                                              label = "lowlevel_init";
++                                              reg = <0x0 0x1b0000>;
++                                      };
++
++                                      partition@1 {
++                                              label = "u-boot";
++                                              reg = <0x1b0000 0x80000>;
++                                      };
++
++                                      partition@2 {
++                                              label = "u-boot-env";
++                                              reg = <0x230000 0x40000>;
++                                      };
++
++                                      partition@3 {
++                                              label = "caldata";
++                                              reg = <0x270000 0x40000>;
++                                      };
++
++                                      partition@4 {
++                                              label = "firmware";
++                                              reg = <0x2b0000 0x1d50000>;
++                                      };
++                              };
++                      };
++              };
++
++              sata-phy@1b400000 {
++                      status = "ok";
++              };
++
++              sata@29000000 {
++                      status = "ok";
++              };
++
++              phy@100f8800 {          /* USB3 port 1 HS phy */
++                      status = "ok";
++              };
++
++              phy@100f8830 {          /* USB3 port 1 SS phy */
++                      status = "ok";
++              };
++
++              phy@110f8800 {          /* USB3 port 0 HS phy */
++                      status = "ok";
++              };
++
++              phy@110f8830 {          /* USB3 port 0 SS phy */
++                      status = "ok";
++              };
++
++              usb30@0 {
++                      status = "ok";
++              };
++
++              usb30@1 {
++                      status = "ok";
++              };
++
++              mdio0: mdio {
++                      compatible = "virtual,mdio-gpio";
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++
++                      phy0: ethernet-phy@0 {
++                              device_type = "ethernet-phy";
++                              reg = <0>;
++                              qca,ar8327-initvals = <
++                                      0x00004 0x7600000   /* PAD0_MODE */
++                                      0x00008 0x1000000   /* PAD5_MODE */
++                                      0x0000c 0x80        /* PAD6_MODE */
++                                      0x000e4 0xaa545     /* MAC_POWER_SEL */
++                                      0x000e0 0xc74164de  /* SGMII_CTRL */
++                                      0x0007c 0x4e        /* PORT0_STATUS */
++                                      0x00094 0x4e        /* PORT6_STATUS */
++                              >;
++                      };
++
++                      phy4: ethernet-phy@4 {
++                              device_type = "ethernet-phy";
++                              reg = <4>;
++                      };
++
++                      phy6: ethernet-phy@6 {
++                              device_type = "ethernet-phy";
++                              reg = <6>;
++                      };
++
++                      phy7: ethernet-phy@7 {
++                              device_type = "ethernet-phy";
++                              reg = <7>;
++                      };
++              };
++
++              nss-gmac-common {
++                      reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
++                      reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
++              };
++
++              gmac0: ethernet@37000000 {
++                      status = "ok";
++                      phy-mode = "rgmii";
++                      qcom,id = <0>;
++                      qcom,phy_mdio_addr = <4>;
++                      qcom,poll_required = <1>;
++                      qcom,rgmii_delay = <1>;
++                      qcom,emulation = <0>;
++                      qcom,forced_speed = <1000>;
++                      qcom,forced_duplex = <1>;
++                      qcom,socver = <0>;
++                      local-mac-address = [000000000000];
++                      mdiobus = <&mdio0>;
++              };
++
++              gmac1: ethernet@37200000 {
++                      status = "ok";
++                      phy-mode = "sgmii";
++                      qcom,id = <1>;
++                      qcom,phy_mdio_addr = <0>;
++                      qcom,poll_required = <0>;
++                      qcom,rgmii_delay = <0>;
++                      qcom,emulation = <0>;
++                      qcom,forced_speed = <1000>;
++                      qcom,forced_duplex = <1>;
++                      qcom,socver = <0>;
++                      local-mac-address = [000000000000];
++                      mdiobus = <&mdio0>;
++              };
++
++              gmac2: ethernet@37400000 {
++                      status = "ok";
++                      phy-mode = "sgmii";
++                      qcom,id = <2>;
++                      qcom,phy_mdio_addr = <6>;
++                      qcom,poll_required = <1>;
++                      qcom,rgmii_delay = <0>;
++                      qcom,emulation = <0>;
++                      qcom,forced_speed = <0>;
++                      qcom,forced_duplex = <0>;
++                      qcom,socver = <0>;
++                      local-mac-address = [000000000000];
++                      mdiobus = <&mdio0>;
++              };
++
++              gmac3: ethernet@37600000 {
++                      status = "ok";
++                      phy-mode = "sgmii";
++                      qcom,id = <3>;
++                      qcom,phy_mdio_addr = <7>;
++                      qcom,poll_required = <1>;
++                      qcom,rgmii_delay = <0>;
++                      qcom,emulation = <0>;
++                      qcom,forced_speed = <0>;
++                      qcom,forced_duplex = <0>;
++                      qcom,socver = <0>;
++                      local-mac-address = [000000000000];
++                      mdiobus = <&mdio0>;
++              };
++      };
++};
+-- 
+1.9.1
+
diff --git a/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch b/target/linux/ipq806x/patches-4.0/022-add-db149-dts.patch
new file mode 100644 (file)
index 0000000..9a036fb
--- /dev/null
@@ -0,0 +1,293 @@
+From a32d6e7c8fca6371a2614924b89981bc912b6378 Mon Sep 17 00:00:00 2001
+From: Mathieu Olivari <mathieu@codeaurora.org>
+Date: Tue, 7 Apr 2015 19:58:58 -0700
+Subject: [PATCH] ARM: dts: qcom: add initial DB149 device-tree
+
+Add basic DB149 (IPQ806x based platform) device-tree. It supports UART,
+SATA, USB2, USB3 and NOR flash.
+
+Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
+---
+ arch/arm/boot/dts/Makefile               |   1 +
+ arch/arm/boot/dts/qcom-ipq8064-db149.dts | 257 +++++++++++++++++++++++++++++++
+ 2 files changed, 258 insertions(+)
+ create mode 100644 arch/arm/boot/dts/qcom-ipq8064-db149.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 38c89ca..745360a 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -360,6 +360,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
+       qcom-apq8084-ifc6540.dtb \
+       qcom-apq8084-mtp.dtb \
+       qcom-ipq8064-ap148.dtb \
++      qcom-ipq8064-db149.dtb \
+       qcom-msm8660-surf.dtb \
+       qcom-msm8960-cdp.dtb \
+       qcom-msm8974-sony-xperia-honami.dtb
+diff --git a/arch/arm/boot/dts/qcom-ipq8064-db149.dts b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+new file mode 100644
+index 0000000..224c54f
+--- /dev/null
++++ b/arch/arm/boot/dts/qcom-ipq8064-db149.dts
+@@ -0,0 +1,257 @@
++#include "qcom-ipq8064-v1.0.dtsi"
++
++/ {
++      model = "Qualcomm IPQ8064/DB149";
++      compatible = "qcom,ipq8064-db149", "qcom,ipq8064";
++
++      reserved-memory {
++              #address-cells = <1>;
++              #size-cells = <1>;
++              ranges;
++              rsvd@41200000 {
++                      reg = <0x41200000 0x300000>;
++                      no-map;
++              };
++      };
++
++      alias {
++              serial0 = &uart2;
++      };
++
++      chosen {
++              linux,stdout-path = "serial0:115200n8";
++      };
++
++      aliases {
++              mdio-gpio0 = &mdio0;
++      };
++
++      soc {
++              pinmux@800000 {
++                      pinctrl-0 = <&mdio0_pins &rgmii0_pinmux>;
++                      pinctrl-names = "default";
++
++                      i2c4_pins: i2c4_pinmux {
++                              pins = "gpio12", "gpio13";
++                              function = "gsbi4";
++                              bias-disable;
++                      };
++
++                      spi_pins: spi_pins {
++                              mux {
++                                      pins = "gpio18", "gpio19", "gpio21";
++                                      function = "gsbi5";
++                                      drive-strength = <10>;
++                                      bias-none;
++                              };
++                      };
++
++                      mdio0_pins: mdio0_pins {
++                              mux {
++                                      pins = "gpio0", "gpio1";
++                                      function = "gpio";
++                                      drive-strength = <8>;
++                                      bias-disable;
++                              };
++                      };
++
++                      rgmii0_pinmux: rgmii0_pinmux {
++                              mux {
++                                      pins = "gpio2", "gpio66";
++                                      drive-strength = <8>;
++                                      bias-disable;
++                              };
++                      };
++              };
++
++              gsbi2: gsbi@12480000 {
++                      qcom,mode = <GSBI_PROT_I2C_UART>;
++                      status = "ok";
++                      uart2: serial@12490000 {
++                              status = "ok";
++                      };
++              };
++
++              gsbi5: gsbi@1a200000 {
++                      qcom,mode = <GSBI_PROT_SPI>;
++                      status = "ok";
++
++                      spi4: spi@1a280000 {
++                              status = "ok";
++                              spi-max-frequency = <50000000>;
++
++                              pinctrl-0 = <&spi_pins>;
++                              pinctrl-names = "default";
++
++                              cs-gpios = <&qcom_pinmux 20 0>;
++
++                              flash: m25p80@0 {
++                                      compatible = "s25fl256s1";
++                                      #address-cells = <1>;
++                                      #size-cells = <1>;
++                                      spi-max-frequency = <50000000>;
++                                      reg = <0>;
++                                      m25p,fast-read;
++
++                                      partition@0 {
++                                              label = "lowlevel_init";
++                                              reg = <0x0 0x1b0000>;
++                                      };
++
++                                      partition@1 {
++                                              label = "u-boot";
++                                              reg = <0x1b0000 0x80000>;
++                                      };
++
++                                      partition@2 {
++                                              label = "u-boot-env";
++                                              reg = <0x230000 0x40000>;
++                                      };
++
++                                      partition@3 {
++                                              label = "caldata";
++                                              reg = <0x270000 0x40000>;
++                                      };
++
++                                      partition@4 {
++                                              label = "firmware";
++                                              reg = <0x2b0000 0x1d50000>;
++                                      };
++                              };
++                      };
++              };
++
++              sata-phy@1b400000 {
++                      status = "ok";
++              };
++
++              sata@29000000 {
++                      status = "ok";
++              };
++
++              phy@100f8800 {          /* USB3 port 1 HS phy */
++                      status = "ok";
++              };
++
++              phy@100f8830 {          /* USB3 port 1 SS phy */
++                      status = "ok";
++              };
++
++              phy@110f8800 {          /* USB3 port 0 HS phy */
++                      status = "ok";
++              };
++
++              phy@110f8830 {          /* USB3 port 0 SS phy */
++                      status = "ok";
++              };
++
++              usb30@0 {
++                      status = "ok";
++              };
++
++              usb30@1 {
++                      status = "ok";
++              };
++
++              mdio0: mdio {
++                      compatible = "virtual,mdio-gpio";
++                      #address-cells = <1>;
++                      #size-cells = <0>;
++                      gpios = <&qcom_pinmux 1 0 &qcom_pinmux 0 0>;
++
++                      phy0: ethernet-phy@0 {
++                              device_type = "ethernet-phy";
++                              reg = <0>;
++                              qca,ar8327-initvals = <
++                                      0x00004 0x7600000   /* PAD0_MODE */
++                                      0x00008 0x1000000   /* PAD5_MODE */
++                                      0x0000c 0x80        /* PAD6_MODE */
++                                      0x000e4 0xaa545     /* MAC_POWER_SEL */
++                                      0x000e0 0xc74164de  /* SGMII_CTRL */
++                                      0x0007c 0x4e        /* PORT0_STATUS */
++                                      0x00094 0x4e        /* PORT6_STATUS */
++                              >;
++                      };
++
++                      phy4: ethernet-phy@4 {
++                              device_type = "ethernet-phy";
++                              reg = <4>;
++                      };
++
++                      phy6: ethernet-phy@6 {
++                              device_type = "ethernet-phy";
++                              reg = <6>;
++                      };
++
++                      phy7: ethernet-phy@7 {
++                              device_type = "ethernet-phy";
++                              reg = <7>;
++                      };
++              };
++
++              nss-gmac-common {
++                      reg = <0x03000000 0x0000FFFF 0x1bb00000 0x0000FFFF 0x00900000 0x00004000>;
++                      reg-names = "nss_reg_base" , "qsgmii_reg_base", "clk_ctl_base";
++              };
++
++              gmac0: ethernet@37000000 {
++                      status = "ok";
++                      phy-mode = "rgmii";
++                      qcom,id = <0>;
++                      qcom,phy_mdio_addr = <4>;
++                      qcom,poll_required = <1>;
++                      qcom,rgmii_delay = <1>;
++                      qcom,emulation = <0>;
++                      qcom,forced_speed = <1000>;
++                      qcom,forced_duplex = <1>;
++                      qcom,socver = <0>;
++                      local-mac-address = [000000000000];
++                      mdiobus = <&mdio0>;
++              };
++
++              gmac1: ethernet@37200000 {
++                      status = "ok";
++                      phy-mode = "sgmii";
++                      qcom,id = <1>;
++                      qcom,phy_mdio_addr = <0>;
++                      qcom,poll_required = <0>;
++                      qcom,rgmii_delay = <0>;
++                      qcom,emulation = <0>;
++                      qcom,forced_speed = <1000>;
++                      qcom,forced_duplex = <1>;
++                      qcom,socver = <0>;
++                      local-mac-address = [000000000000];
++                      mdiobus = <&mdio0>;
++              };
++
++              gmac2: ethernet@37400000 {
++                      status = "ok";
++                      phy-mode = "sgmii";
++                      qcom,id = <2>;
++                      qcom,phy_mdio_addr = <6>;
++                      qcom,poll_required = <1>;
++                      qcom,rgmii_delay = <0>;
++                      qcom,emulation = <0>;
++                      qcom,forced_speed = <0>;
++                      qcom,forced_duplex = <0>;
++                      qcom,socver = <0>;
++                      local-mac-address = [000000000000];
++                      mdiobus = <&mdio0>;
++              };
++
++              gmac3: ethernet@37600000 {
++                      status = "ok";
++                      phy-mode = "sgmii";
++                      qcom,id = <3>;
++                      qcom,phy_mdio_addr = <7>;
++                      qcom,poll_required = <1>;
++                      qcom,rgmii_delay = <0>;
++                      qcom,emulation = <0>;
++                      qcom,forced_speed = <0>;
++                      qcom,forced_duplex = <0>;
++                      qcom,socver = <0>;
++                      local-mac-address = [000000000000];
++                      mdiobus = <&mdio0>;
++              };
++      };
++};
+-- 
+1.9.1
+