autodetect ARM variant/ABI setup based on the compiler settings
authorImre Kaloz <kaloz@openwrt.org>
Wed, 2 Feb 2011 20:19:28 +0000 (20:19 +0000)
committerImre Kaloz <kaloz@openwrt.org>
Wed, 2 Feb 2011 20:19:28 +0000 (20:19 +0000)
SVN-Revision: 25328

12 files changed:
toolchain/uClibc/config-0.9.32/arm
toolchain/uClibc/config-0.9.32/arm.cns21xx [deleted file]
toolchain/uClibc/config-0.9.32/arm.cns3xxx [deleted file]
toolchain/uClibc/config-0.9.32/arm.gemini [deleted file]
toolchain/uClibc/config-0.9.32/armeb
toolchain/uClibc/patches-0.9.32/900-reorder_use_bx.patch [new file with mode: 0644]
toolchain/uClibc/patches-0.9.32/910-thumb_blind_options.patch [new file with mode: 0644]
toolchain/uClibc/patches-0.9.32/920-remove_sub-arch_variants.patch [new file with mode: 0644]
toolchain/uClibc/patches-0.9.32/930-transform_eabi_oabi_choice.patch [new file with mode: 0644]
toolchain/uClibc/patches-0.9.32/940-include_arm-asm.h.patch [new file with mode: 0644]
toolchain/uClibc/patches-0.9.32/950-detect_bx_availibility.patch [new file with mode: 0644]
toolchain/uClibc/patches-0.9.32/960-remove_eabi_oabi_selection.patch [new file with mode: 0644]

index d26b075..b68617b 100644 (file)
@@ -1,25 +1,7 @@
 ARCH_ANY_ENDIAN=y
 ARCH_LITTLE_ENDIAN=y
 ARCH_WANTS_LITTLE_ENDIAN=y
-# CONFIG_ARM10T is not set
-# CONFIG_ARM1136JF_S is not set
-# CONFIG_ARM1176JZF_S is not set
-# CONFIG_ARM1176JZ_S is not set
-# CONFIG_ARM610 is not set
-# CONFIG_ARM710 is not set
-# CONFIG_ARM720T is not set
-# CONFIG_ARM7TDMI is not set
-# CONFIG_ARM920T is not set
-# CONFIG_ARM922T is not set
-# CONFIG_ARM926T is not set
-# CONFIG_ARM_CORTEX_M1 is not set
-# CONFIG_ARM_CORTEX_M3 is not set
-# CONFIG_ARM_EABI is not set
-# CONFIG_ARM_IWMMXT is not set
-CONFIG_ARM_OABI=y
-# CONFIG_ARM_SA110 is not set
-# CONFIG_ARM_SA1100 is not set
-CONFIG_ARM_XSCALE=y
-# CONFIG_GENERIC_ARM is not set
+# COMPILE_IN_THUMB_MODE is not set
 TARGET_ARCH="arm"
 TARGET_arm=y
+# USE_BX is not set
diff --git a/toolchain/uClibc/config-0.9.32/arm.cns21xx b/toolchain/uClibc/config-0.9.32/arm.cns21xx
deleted file mode 100644 (file)
index 8043cf6..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-ARCH_ANY_ENDIAN=y
-ARCH_LITTLE_ENDIAN=y
-ARCH_WANTS_LITTLE_ENDIAN=y
-# CONFIG_ARM10T is not set
-# CONFIG_ARM1136JF_S is not set
-# CONFIG_ARM1176JZF_S is not set
-# CONFIG_ARM1176JZ_S is not set
-# CONFIG_ARM610 is not set
-# CONFIG_ARM710 is not set
-# CONFIG_ARM720T is not set
-# CONFIG_ARM7TDMI is not set
-CONFIG_ARM920T=y
-# CONFIG_ARM922T is not set
-# CONFIG_ARM926T is not set
-# CONFIG_ARM_CORTEX_M1 is not set
-# CONFIG_ARM_CORTEX_M3 is not set
-# CONFIG_ARM_EABI is not set
-# CONFIG_ARM_IWMMXT is not set
-CONFIG_ARM_OABI=y
-# CONFIG_ARM_SA110 is not set
-# CONFIG_ARM_SA1100 is not set
-# CONFIG_ARM_XSCALE is not set
-# CONFIG_GENERIC_ARM is not set
-TARGET_ARCH="arm"
-TARGET_arm=y
-# USE_BX is not set
diff --git a/toolchain/uClibc/config-0.9.32/arm.cns3xxx b/toolchain/uClibc/config-0.9.32/arm.cns3xxx
deleted file mode 100644 (file)
index 84ad02b..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-ARCH_ANY_ENDIAN=y
-ARCH_LITTLE_ENDIAN=y
-ARCH_WANTS_LITTLE_ENDIAN=y
-# CONFIG_ARM10T is not set
-# CONFIG_ARM1136JF_S is not set
-CONFIG_ARM1176JZF_S=y
-# CONFIG_ARM1176JZ_S is not set
-# CONFIG_ARM610 is not set
-# CONFIG_ARM710 is not set
-# CONFIG_ARM720T is not set
-# CONFIG_ARM7TDMI is not set
-# CONFIG_ARM920T is not set
-# CONFIG_ARM922T is not set
-# CONFIG_ARM926T is not set
-# CONFIG_ARM_CORTEX_M1 is not set
-# CONFIG_ARM_CORTEX_M3 is not set
-# CONFIG_ARM_EABI is not set
-# CONFIG_ARM_IWMMXT is not set
-CONFIG_ARM_OABI=y
-# CONFIG_ARM_SA110 is not set
-# CONFIG_ARM_SA1100 is not set
-# CONFIG_ARM_XSCALE is not set
-# CONFIG_GENERIC_ARM is not set
-TARGET_ARCH="arm"
-TARGET_arm=y
diff --git a/toolchain/uClibc/config-0.9.32/arm.gemini b/toolchain/uClibc/config-0.9.32/arm.gemini
deleted file mode 100644 (file)
index 8043cf6..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
-ARCH_ANY_ENDIAN=y
-ARCH_LITTLE_ENDIAN=y
-ARCH_WANTS_LITTLE_ENDIAN=y
-# CONFIG_ARM10T is not set
-# CONFIG_ARM1136JF_S is not set
-# CONFIG_ARM1176JZF_S is not set
-# CONFIG_ARM1176JZ_S is not set
-# CONFIG_ARM610 is not set
-# CONFIG_ARM710 is not set
-# CONFIG_ARM720T is not set
-# CONFIG_ARM7TDMI is not set
-CONFIG_ARM920T=y
-# CONFIG_ARM922T is not set
-# CONFIG_ARM926T is not set
-# CONFIG_ARM_CORTEX_M1 is not set
-# CONFIG_ARM_CORTEX_M3 is not set
-# CONFIG_ARM_EABI is not set
-# CONFIG_ARM_IWMMXT is not set
-CONFIG_ARM_OABI=y
-# CONFIG_ARM_SA110 is not set
-# CONFIG_ARM_SA1100 is not set
-# CONFIG_ARM_XSCALE is not set
-# CONFIG_GENERIC_ARM is not set
-TARGET_ARCH="arm"
-TARGET_arm=y
-# USE_BX is not set
index ba3ea5c..d4932e8 100644 (file)
@@ -1,25 +1,7 @@
 ARCH_ANY_ENDIAN=y
 ARCH_BIG_ENDIAN=y
 ARCH_WANTS_BIG_ENDIAN=y
-# CONFIG_ARM10T is not set
-# CONFIG_ARM1136JF_S is not set
-# CONFIG_ARM1176JZF_S is not set
-# CONFIG_ARM1176JZ_S is not set
-# CONFIG_ARM610 is not set
-# CONFIG_ARM710 is not set
-# CONFIG_ARM720T is not set
-# CONFIG_ARM7TDMI is not set
-# CONFIG_ARM920T is not set
-# CONFIG_ARM922T is not set
-# CONFIG_ARM926T is not set
-# CONFIG_ARM_CORTEX_M1 is not set
-# CONFIG_ARM_CORTEX_M3 is not set
-# CONFIG_ARM_EABI is not set
-# CONFIG_ARM_IWMMXT is not set
-CONFIG_ARM_OABI=y
-# CONFIG_ARM_SA110 is not set
-# CONFIG_ARM_SA1100 is not set
-CONFIG_ARM_XSCALE=y
-# CONFIG_GENERIC_ARM is not set
+# COMPILE_IN_THUMB_MODE is not set
 TARGET_ARCH="arm"
 TARGET_arm=y
+# USE_BX is not set
diff --git a/toolchain/uClibc/patches-0.9.32/900-reorder_use_bx.patch b/toolchain/uClibc/patches-0.9.32/900-reorder_use_bx.patch
new file mode 100644 (file)
index 0000000..dddd0a0
--- /dev/null
@@ -0,0 +1,46 @@
+"Use BX" is not available on all CPUs, so the option depends on
+a correct CPU to be chosen . It is weird that e BX" then appears
+_above_ the CPU selection, not below.
+
+Move the "Use BX" after the CPU selection.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+Cc: Khem Raj <raj.khem@gmail.com>
+Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
+---
+ extra/Configs/Config.arm |   14 +++++++-------
+ 1 files changed, 7 insertions(+), 7 deletions(-)
+
+diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm
+index b060ace..3b90e67 100644
+--- a/extra/Configs/Config.arm
++++ b/extra/Configs/Config.arm
+@@ -30,13 +30,6 @@ config CONFIG_ARM_EABI
+ endchoice
+-config USE_BX
+-      bool "Use BX in function return"
+-      default y
+-      depends on !CONFIG_GENERIC_ARM && !CONFIG_ARM610 && !CONFIG_ARM710
+-      help
+-        Use BX instruction for THUMB aware architectures.
+-
+ choice
+       prompt "Target Processor Type"
+       default CONFIG_GENERIC_ARM
+@@ -131,3 +124,10 @@ config CONFIG_ARM_IWMMXT
+       select ARCH_HAS_MMU
+ endchoice
++
++config USE_BX
++      bool "Use BX in function return"
++      default y
++      depends on !CONFIG_GENERIC_ARM && !CONFIG_ARM610 && !CONFIG_ARM710
++      help
++        Use BX instruction for THUMB aware architectures.
+-- 
+1.7.1
+
diff --git a/toolchain/uClibc/patches-0.9.32/910-thumb_blind_options.patch b/toolchain/uClibc/patches-0.9.32/910-thumb_blind_options.patch
new file mode 100644 (file)
index 0000000..7585533
--- /dev/null
@@ -0,0 +1,146 @@
+Add three new blind options to set use of Thumb mode:
+- COMPILE_IN_THUMB_MODE
+  - if set, CFLAGS will contain -mthumb
+  - if unset, the compiler's default is used
+- HAS_THUMB
+  - CPUS with Thumb instruction set can select this
+  - use of BX depends on this
+- FORCE_THUMB
+  - CPUs that are Thumb-only must select this
+  - this selects: HAS_THUMB, COMPILE_IN_THUMB_MODE and USE_BX
+
+Also, remove leading space in Rules.mak.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+Cc: Khem Raj <raj.khem@gmail.com>
+Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
+---
+ Rules.mak                |    7 ++++---
+ extra/Configs/Config.arm |   31 ++++++++++++++++++++++++++++---
+ 2 files changed, 32 insertions(+), 6 deletions(-)
+
+diff --git a/Rules.mak b/Rules.mak
+index eecdc64..2a16908 100644
+--- a/Rules.mak
++++ b/Rules.mak
+@@ -348,9 +348,10 @@ ifeq ($(TARGET_ARCH),arm)
+       CPU_CFLAGS-$(CONFIG_ARM_SA1100)+=-mtune=strongarm1100 -march=armv4
+       CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=$(call check_gcc,-mtune=xscale,-mtune=strongarm110)
+       CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=-march=armv5te -Wa,-mcpu=xscale
+-      CPU_CFLAGS-$(CONFIG_ARM_IWMMXT)+=-march=iwmmxt -Wa,-mcpu=iwmmxt -mabi=iwmmxt
+-      CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M3)+=-mcpu=cortex-m3 -mthumb
+-      CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M1)+=-mcpu=cortex-m1 -mthumb
++      CPU_CFLAGS-$(CONFIG_ARM_IWMMXT)+=-march=iwmmxt -Wa,-mcpu=iwmmxt -mabi=iwmmxt
++      CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M3)+=-mcpu=cortex-m3
++      CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M1)+=-mcpu=cortex-m1
++      CPU_CFLAGS-$(COMPILE_IN_THUMB_MODE)+=-mthumb
+ endif
+ ifeq ($(TARGET_ARCH),mips)
+diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm
+index 3b90e67..c9c40d4 100644
+--- a/extra/Configs/Config.arm
++++ b/extra/Configs/Config.arm
+@@ -64,70 +64,95 @@ config CONFIG_ARM710
+ config CONFIG_ARM7TDMI
+       bool "Arm 7TDMI"
+       select ARCH_HAS_NO_MMU
++      select HAS_THUMB
+ config CONFIG_ARM720T
+       bool "Arm 720T"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM920T
+       bool "Arm 920T"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM922T
+       bool "Arm 922T"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM926T
+       bool "Arm 926T"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM10T
+       bool "Arm 10T"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM1136JF_S
+       bool "Arm 1136JF-S"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM1176JZ_S
+       bool "Arm 1176JZ-S"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM1176JZF_S
+       bool "Arm 1176JZF-S"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM_CORTEX_M3
+       bool "Arm Cortex-M3"
+       select ARCH_HAS_NO_MMU
+-      select USE_BX
++      select FORCE_THUMB
+ config CONFIG_ARM_CORTEX_M1
+       bool "Arm Cortex-M1"
+       select ARCH_HAS_NO_MMU
+-      select USE_BX
++      select FORCE_THUMB
+ config CONFIG_ARM_SA110
+       bool "Intel StrongArm SA-110"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM_SA1100
+       bool "Intel StrongArm SA-1100"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM_XSCALE
+       bool "Intel Xscale"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ config CONFIG_ARM_IWMMXT
+       bool "Intel Xscale With WMMX PXA27x"
+       select ARCH_HAS_MMU
++      select HAS_THUMB
+ endchoice
++config HAS_THUMB
++      bool
++
++config FORCE_THUMB
++      bool
++      select HAS_THUMB
++      select COMPILE_IN_THUMB_MODE
++      select USE_BX
++
++config COMPILE_IN_THUMB_MODE
++      bool
++
+ config USE_BX
+       bool "Use BX in function return"
+       default y
+-      depends on !CONFIG_GENERIC_ARM && !CONFIG_ARM610 && !CONFIG_ARM710
++      depends on HAS_THUMB
+       help
+         Use BX instruction for THUMB aware architectures.
+-- 
+1.7.1
+
diff --git a/toolchain/uClibc/patches-0.9.32/920-remove_sub-arch_variants.patch b/toolchain/uClibc/patches-0.9.32/920-remove_sub-arch_variants.patch
new file mode 100644 (file)
index 0000000..4051ef3
--- /dev/null
@@ -0,0 +1,189 @@
+Rely on the compiler to be correctly set up to generate
+appropriate code for the target variant.
+
+This exposes the Thumb option, as it is no longer auto-selected.
+The "Use BX" no longer depends on supported CPU to be selected,
+so it now defaults to 'n' as it shall work by default on CPUs
+that do not have BX.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+Cc: Khem Raj <raj.khem@gmail.com>
+Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
+---
+ Rules.mak                |   19 -------
+ extra/Configs/Config.arm |  125 ++--------------------------------------------
+ 2 files changed, 5 insertions(+), 139 deletions(-)
+
+diff --git a/Rules.mak b/Rules.mak
+index 2a16908..09741a6 100644
+--- a/Rules.mak
++++ b/Rules.mak
+@@ -332,25 +332,6 @@ ifeq ($(TARGET_ARCH),arm)
+       OPTIMIZATION+=-fstrict-aliasing
+       CPU_CFLAGS-$(ARCH_LITTLE_ENDIAN)+=-mlittle-endian
+       CPU_CFLAGS-$(ARCH_BIG_ENDIAN)+=-mbig-endian
+-      CPU_CFLAGS-$(CONFIG_GENERIC_ARM)+=
+-      CPU_CFLAGS-$(CONFIG_ARM610)+=-mtune=arm610 -march=armv3
+-      CPU_CFLAGS-$(CONFIG_ARM710)+=-mtune=arm710 -march=armv3
+-      CPU_CFLAGS-$(CONFIG_ARM7TDMI)+=-mtune=arm7tdmi -march=armv4t
+-      CPU_CFLAGS-$(CONFIG_ARM720T)+=-mtune=arm7tdmi -march=armv4t
+-      CPU_CFLAGS-$(CONFIG_ARM920T)+=-mtune=arm9tdmi -march=armv4t
+-      CPU_CFLAGS-$(CONFIG_ARM922T)+=-mtune=arm9tdmi -march=armv4t
+-      CPU_CFLAGS-$(CONFIG_ARM926T)+=-mtune=arm9e -march=armv5te
+-      CPU_CFLAGS-$(CONFIG_ARM10T)+=-mtune=arm10tdmi -march=armv5t
+-      CPU_CFLAGS-$(CONFIG_ARM1136JF_S)+=-mtune=arm1136jf-s -march=armv6
+-      CPU_CFLAGS-$(CONFIG_ARM1176JZ_S)+=-mtune=arm1176jz-s -march=armv6
+-      CPU_CFLAGS-$(CONFIG_ARM1176JZF_S)+=-mtune=arm1176jzf-s -march=armv6
+-      CPU_CFLAGS-$(CONFIG_ARM_SA110)+=-mtune=strongarm110 -march=armv4
+-      CPU_CFLAGS-$(CONFIG_ARM_SA1100)+=-mtune=strongarm1100 -march=armv4
+-      CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=$(call check_gcc,-mtune=xscale,-mtune=strongarm110)
+-      CPU_CFLAGS-$(CONFIG_ARM_XSCALE)+=-march=armv5te -Wa,-mcpu=xscale
+-      CPU_CFLAGS-$(CONFIG_ARM_IWMMXT)+=-march=iwmmxt -Wa,-mcpu=iwmmxt -mabi=iwmmxt
+-      CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M3)+=-mcpu=cortex-m3
+-      CPU_CFLAGS-$(CONFIG_ARM_CORTEX_M1)+=-mcpu=cortex-m1
+       CPU_CFLAGS-$(COMPILE_IN_THUMB_MODE)+=-mthumb
+ endif
+diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm
+index c9c40d4..6c75a00 100644
+--- a/extra/Configs/Config.arm
++++ b/extra/Configs/Config.arm
+@@ -30,129 +30,14 @@ config CONFIG_ARM_EABI
+ endchoice
+-choice
+-      prompt "Target Processor Type"
+-      default CONFIG_GENERIC_ARM
+-      help
+-        This is the processor type of your CPU. This information is used for
+-        optimizing purposes.  To build a library that will run on all ARMCPU
+-        types (albeit not optimally fast), you can specify "Generic Arm" here.
+-        If you pick anything other than "Generic Arm", there is no guarantee 
+-        that uClibc will even run on anything other than the selected
+-        processor type.
+-
+-        Here are the settings recommended for greatest speed:
+-        - "Generic Arm" select this if your compiler is already setup to
+-          optimize things properly, or if you want to run on pretty much
+-          everything, or you just don't much care.
+-        - For anything else, pick the ARM core type that best matches the
+-          cpu you will be using on your device.
+-
+-        If you don't know what to do, choose "Generic Arm".
+-
+-config CONFIG_GENERIC_ARM
+-      bool "Generic Arm"
+-
+-config CONFIG_ARM610
+-      bool "Arm 610"
+-      select ARCH_HAS_MMU
+-
+-config CONFIG_ARM710
+-      bool "Arm 710"
+-      select ARCH_HAS_MMU
+-
+-config CONFIG_ARM7TDMI
+-      bool "Arm 7TDMI"
+-      select ARCH_HAS_NO_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM720T
+-      bool "Arm 720T"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM920T
+-      bool "Arm 920T"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM922T
+-      bool "Arm 922T"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM926T
+-      bool "Arm 926T"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM10T
+-      bool "Arm 10T"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM1136JF_S
+-      bool "Arm 1136JF-S"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM1176JZ_S
+-      bool "Arm 1176JZ-S"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM1176JZF_S
+-      bool "Arm 1176JZF-S"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM_CORTEX_M3
+-      bool "Arm Cortex-M3"
+-      select ARCH_HAS_NO_MMU
+-      select FORCE_THUMB
+-
+-config CONFIG_ARM_CORTEX_M1
+-      bool "Arm Cortex-M1"
+-      select ARCH_HAS_NO_MMU
+-      select FORCE_THUMB
+-
+-config CONFIG_ARM_SA110
+-      bool "Intel StrongArm SA-110"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM_SA1100
+-      bool "Intel StrongArm SA-1100"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM_XSCALE
+-      bool "Intel Xscale"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-config CONFIG_ARM_IWMMXT
+-      bool "Intel Xscale With WMMX PXA27x"
+-      select ARCH_HAS_MMU
+-      select HAS_THUMB
+-
+-endchoice
+-
+-config HAS_THUMB
+-      bool
+-
+-config FORCE_THUMB
+-      bool
+-      select HAS_THUMB
+-      select COMPILE_IN_THUMB_MODE
+-      select USE_BX
+-
+ config COMPILE_IN_THUMB_MODE
+-      bool
++      bool "Build using Thumb mode"
++      select USE_BX
++      help
++        Say 'y' here to force building uClibc in thumb mode.
++        Say 'n' to use your compiler's default mode.
+ config USE_BX
+       bool "Use BX in function return"
+-      default y
+-      depends on HAS_THUMB
+       help
+         Use BX instruction for THUMB aware architectures.
+-- 
+1.7.1
+
diff --git a/toolchain/uClibc/patches-0.9.32/930-transform_eabi_oabi_choice.patch b/toolchain/uClibc/patches-0.9.32/930-transform_eabi_oabi_choice.patch
new file mode 100644 (file)
index 0000000..7a91f67
--- /dev/null
@@ -0,0 +1,49 @@
+The CONFIG_ARM_OABI option is never used.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+Cc: Khem Raj <raj.khem@gmail.com>
+Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
+---
+ extra/Configs/Config.arm |   23 ++++++++---------------
+ 1 files changed, 8 insertions(+), 15 deletions(-)
+
+diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm
+index 6c75a00..227b90c 100644
+--- a/extra/Configs/Config.arm
++++ b/extra/Configs/Config.arm
+@@ -12,23 +12,16 @@ config FORCE_OPTIONS_FOR_ARCH
+       default y
+       select ARCH_ANY_ENDIAN
+-choice
+-      prompt "Target ABI"
+-      default CONFIG_ARM_OABI
++config CONFIG_ARM_EABI
++      bool "Build for EABI"
+       help
+-        If you choose "EABI" here, functions and constants required by the
+-        ARM EABI will be built into the library.  You should choose "EABI"
++        If you say 'y' here, functions and constants required by the
++        ARM EABI will be built into the library.  You should say 'y'
+         if your compiler uses the ARM EABI, in which case you will also
+-        need a kernel supporting the EABI system call interface, or "OABI"
+-        for a compiler using the old Linux ABI.
+-
+-config CONFIG_ARM_OABI
+-      bool "OABI"
+-
+-config CONFIG_ARM_EABI
+-      bool "EABI"
+-
+-endchoice
++        need a kernel supporting the EABI system call interface.
++        
++        If you say 'n' here, then the library will be built for the
++        old Linux ABI.
+ config COMPILE_IN_THUMB_MODE
+       bool "Build using Thumb mode"
+-- 
+1.7.1
+
diff --git a/toolchain/uClibc/patches-0.9.32/940-include_arm-asm.h.patch b/toolchain/uClibc/patches-0.9.32/940-include_arm-asm.h.patch
new file mode 100644 (file)
index 0000000..955b372
--- /dev/null
@@ -0,0 +1,39 @@
+The check for __USE_BX__ will be available in bits/arm_asm.h,
+so the latter must be included wherever the former is used.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+Cc: Khem Raj <raj.khem@gmail.com>
+Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
+---
+ ldso/ldso/arm/dl-startup.h      |    1 +
+ libc/sysdeps/linux/arm/sysdep.h |    1 +
+ 2 files changed, 2 insertions(+), 0 deletions(-)
+
+diff --git a/ldso/ldso/arm/dl-startup.h b/ldso/ldso/arm/dl-startup.h
+index a95389d..2dfdaff 100644
+--- a/ldso/ldso/arm/dl-startup.h
++++ b/ldso/ldso/arm/dl-startup.h
+@@ -7,6 +7,7 @@
+  */
+ #include <features.h>
++#include <bits/arm_asm.h>
+ #if !defined(__thumb__)
+ __asm__(
+diff --git a/libc/sysdeps/linux/arm/sysdep.h b/libc/sysdeps/linux/arm/sysdep.h
+index 013f88c..e498695 100644
+--- a/libc/sysdeps/linux/arm/sysdep.h
++++ b/libc/sysdeps/linux/arm/sysdep.h
+@@ -21,6 +21,7 @@
+ #define _LINUX_ARM_SYSDEP_H 1
+ #include <common/sysdep.h>
++#include <bits/arm_asm.h>
+ #include <sys/syscall.h>
+ /* For Linux we can use the system call table in the header file
+-- 
+1.7.1
+
diff --git a/toolchain/uClibc/patches-0.9.32/950-detect_bx_availibility.patch b/toolchain/uClibc/patches-0.9.32/950-detect_bx_availibility.patch
new file mode 100644 (file)
index 0000000..24d5bcc
--- /dev/null
@@ -0,0 +1,49 @@
+The "use BX" option is now a suggestion that BX be used if available.
+Use a macro to detect if BX is available at build time. If so, and
+the user requested it be used, then use it. Otherwise, error out.
+
+Macro courtesy Khem RAJ:
+  http://lists.uclibc.org/pipermail/uclibc/2009-April/042301.html
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+Cc: Khem Raj <raj.khem@gmail.com>
+Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
+---
+ extra/Configs/Config.arm              |    4 +++-
+ libc/sysdeps/linux/arm/bits/arm_asm.h |    9 ++++++++-
+ 2 files changed, 11 insertions(+), 2 deletions(-)
+
+diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm
+index 227b90c..9aa9e56 100644
+--- a/extra/Configs/Config.arm
++++ b/extra/Configs/Config.arm
+@@ -33,4 +33,6 @@ config COMPILE_IN_THUMB_MODE
+ config USE_BX
+       bool "Use BX in function return"
+       help
+-        Use BX instruction for THUMB aware architectures.
++        Say 'y' to use BX to return from functions on your thumb-aware
++        processor. Say 'y' if you need to use interworking. Say 'n' if not.
++        It is safe to say 'y' even if you're not doing interworking.
+diff --git a/libc/sysdeps/linux/arm/bits/arm_asm.h b/libc/sysdeps/linux/arm/bits/arm_asm.h
+index 1d87df6..921c9a3 100644
+--- a/libc/sysdeps/linux/arm/bits/arm_asm.h
++++ b/libc/sysdeps/linux/arm/bits/arm_asm.h
+@@ -24,5 +24,12 @@
+ #define THUMB1_ONLY 1
+ #endif
+-#endif /* _ARM_ASM_H */
++#if defined(__USE_BX__)
++# if (   defined (__ARM_ARCH_2__)  || defined (__ARM_ARCH_3__) \
++      || defined (__ARM_ARCH_3M__) || defined (__ARM_ARCH_4__) \
++     )
++#  error Use of BX was requested, but is not available on the target processor.
++# endif /* ARCH level */
++#endif /* __USE_BX__ */
++#endif /* _ARM_ASM_H */
+-- 
+1.7.1
+
diff --git a/toolchain/uClibc/patches-0.9.32/960-remove_eabi_oabi_selection.patch b/toolchain/uClibc/patches-0.9.32/960-remove_eabi_oabi_selection.patch
new file mode 100644 (file)
index 0000000..a87d8c9
--- /dev/null
@@ -0,0 +1,90 @@
+Rely on the compiler to be properly setup for the default ABI.
+
+When installing-headers, there are two cases:
+- NPTL: no issue, a cross-compiler is already expected
+- LinuxThreads: no issue, EABI/OABI has no impact on installed headers.
+
+Signed-off-by: "Yann E. MORIN" <yann.morin.1998@anciens.enib.fr>
+Cc: Khem Raj <raj.khem@gmail.com>
+Cc: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
+Cc: Carmelo AMOROSO <carmelo.amoroso@st.com>
+---
+ extra/Configs/Config.arm               |   11 -----------
+ libc/sysdeps/linux/arm/Makefile.arch   |    9 +++++++--
+ libc/sysdeps/linux/arm/bits/huge_val.h |    4 ++--
+ 3 files changed, 9 insertions(+), 15 deletions(-)
+
+diff --git a/extra/Configs/Config.arm b/extra/Configs/Config.arm
+index 9aa9e56..85f2515 100644
+--- a/extra/Configs/Config.arm
++++ b/extra/Configs/Config.arm
+@@ -12,17 +12,6 @@ config FORCE_OPTIONS_FOR_ARCH
+       default y
+       select ARCH_ANY_ENDIAN
+-config CONFIG_ARM_EABI
+-      bool "Build for EABI"
+-      help
+-        If you say 'y' here, functions and constants required by the
+-        ARM EABI will be built into the library.  You should say 'y'
+-        if your compiler uses the ARM EABI, in which case you will also
+-        need a kernel supporting the EABI system call interface.
+-        
+-        If you say 'n' here, then the library will be built for the
+-        old Linux ABI.
+-
+ config COMPILE_IN_THUMB_MODE
+       bool "Build using Thumb mode"
+       select USE_BX
+diff --git a/libc/sysdeps/linux/arm/Makefile.arch b/libc/sysdeps/linux/arm/Makefile.arch
+index b53c539..14279e0 100644
+--- a/libc/sysdeps/linux/arm/Makefile.arch
++++ b/libc/sysdeps/linux/arm/Makefile.arch
+@@ -24,7 +24,12 @@ ifeq ($(UCLIBC_HAS_ADVANCED_REALTIME),y)
+ CSRC += posix_fadvise.c posix_fadvise64.c
+ endif
+-ifeq ($(CONFIG_ARM_EABI),y)
++# Is our compiler set up for EABI ?
++IS_EABI:=$(shell $(CC) $(CFLAGS) -x c - -E -dM </dev/null 2>/dev/null \
++                 |sed -r -e '/^\#[[:space:]]*define[[:space:]]+__ARM_EABI__([[:space:]]+1)?$$/!d; s/.+/y/;' \
++          )
++
++ifeq ($(IS_EABI),y)
+ CSRC += aeabi_assert.c aeabi_atexit.c aeabi_errno_addr.c \
+       aeabi_localeconv.c aeabi_memclr.c aeabi_memcpy.c \
+       aeabi_memmove.c aeabi_memset.c find_exidx.c
+@@ -37,7 +42,7 @@ else
+ CSRC += syscall.c
+ endif
+-ifeq ($(CONFIG_ARM_EABI),y)
++ifeq ($(IS_EABI),y)
+ libc-static-y += $(ARCH_OUT)/aeabi_lcsts.o $(ARCH_OUT)/aeabi_math.o \
+       $(ARCH_OUT)/aeabi_sighandlers.o
+ libc-nonshared-y += $(ARCH_OUT)/aeabi_lcsts.os $(ARCH_OUT)/aeabi_math.os \
+diff --git a/libc/sysdeps/linux/arm/bits/huge_val.h b/libc/sysdeps/linux/arm/bits/huge_val.h
+index a215f3c..745e0bb 100644
+--- a/libc/sysdeps/linux/arm/bits/huge_val.h
++++ b/libc/sysdeps/linux/arm/bits/huge_val.h
+@@ -32,7 +32,7 @@
+ # define HUGE_VAL (__extension__ 0x1.0p2047)
+ #elif defined __GNUC__
+-#ifndef __CONFIG_ARM_EABI__
++#ifndef __ARM_EABI__
+ # define HUGE_VAL \
+   (__extension__                                                            \
+    ((union { unsigned __l __attribute__((__mode__(__DI__))); double __d; })   \
+@@ -50,7 +50,7 @@
+ typedef union { unsigned char __c[8]; double __d; } __huge_val_t;
+-#ifndef __CONFIG_ARM_EABI__
++#ifndef __ARM_EABI__
+ # if __BYTE_ORDER == __BIG_ENDIAN
+ #  define __HUGE_VAL_bytes    { 0, 0, 0, 0, 0x7f, 0xf0, 0, 0 }
+ # endif
+-- 
+1.7.1
+