-/*!**********************************************************************
-*!
-*! FILE NAME: hwregs.h
-*!
-*! DESCRIPTION: Interface to shadow registers.
-*!
-*! FUNCTIONS: none
-*!
-*! NOTE: This file is automatically generated, do _not_ edit.
-*! Created: Thu Oct 3 01:21:27 2002
-*! By: Id: shadow_gen,v 1.14 2002/10/02 20:31:22 hp Exp
-*! From: /n/asic/projects/etrax_ng/doc/work/etrax_ng_regs.rd 1.168
-*! /n/asic/projects/etrax_ng/include//hwregs.ctrl 1.3
-*!
-*! MACROS: REG_GET
-*! REG_IGET
-*! REG_VGET
-*! REG_SET
-*! REG_ISET
-*! REG_VSET
-*! REG_SET_VAL
-*! REG_SET__register-name (one for each register)
-*! REG_SET__register-name__SHADOW (one for each register)
-*! REG_MASK__register-name (one for each register)
-*! REG_VAL__register-name (one for each register)
-*! REG_EQL
-*! REG_IEQL
-*! REG_VEQL
-*! REG_VAL
-*! REG_CHK_VAL
-*! REG_RD
-*! REG_IRD
-*! REG_WR
-*! REG_IWR
-*! REG_ADDR
-*! REG_BITNR
-*!
-*!----------------------------------------------------------------------
-*! HISTORY
-*!
-*! DATE NAME CHANGES
-*! ---- ---- -------
-*! Apr 01 1998 Jan Bengtsson Initial version
-*! Oct 01 2002 Hans-Peter Nilsson Large mechanical changes to correct
-*! use of the ## operator.
-*!----------------------------------------------------------------------
-*!
-*! (C) Copyright 1998, 2002 Axis Communications AB, LUND, SWEDEN
-*!
-*!**********************************************************************/
-/* %Z% %M% %I% %G% */
-
-#ifndef __HWREGS_H__
-#define __HWREGS_H__
-
-/********************** INCLUDE FILES SECTION **************************/
-#ifndef __ASSEMBLER__
-#include "compiler.h"
-#include "debug.h"
-#endif /* __ASSEMBLER__ */
-
-#include "project.h"
-#include "hwregs_def.h"
-
-#ifndef __ASSEMBLER__
-
-#ifndef __REG_GENERAL_1_H__
-#define __REG_GENERAL_1_H__
-
-/*
-** This part of hwregs.h is common to all shadow
-** register modules, and should therefore only be included once to
-** avoid macro redefinitions.
-*/
-
-/* REG_DEBUG is by default controlled by DEBUG from debug.h. */
-#ifndef REG_DEBUG
-#ifdef DEBUG
-#define REG_DEBUG 1
-#else
-#define REG_DEBUG 0
-#endif /* DEBUG */
-#endif /* REG_DEBUG */
-
-#endif /* __REG_GENERAL_1_H__ */
-
-#endif /* __ASSEMBLER__ */
-
-/********************** TYPE DEFINITION SECTION ************************/
-#ifndef __ASSEMBLER__
-
-#ifndef REG_NO_SHADOW
-
-/* Only write only registers need a shadow register. */
-
-typedef struct {
-#if USE_GROUP__Bus_interface_configuration_registers
- byte R_WAITSTATES[4];
- byte R_BUS_CONFIG[4];
- byte R_DRAM_TIMING[4];
- byte R_DRAM_CONFIG[4];
-#endif
-#if USE_GROUP__External_DMA_registers
- byte R_EXT_DMA_0_CMD[4];
- byte R_EXT_DMA_0_ADDR[4];
- byte R_EXT_DMA_1_CMD[4];
- byte R_EXT_DMA_1_ADDR[4];
-#endif
-#if USE_GROUP__Timer_registers
- byte R_TIMER_CTRL[4];
- byte R_WATCHDOG[4];
-#endif
-#if USE_GROUP__General_config_registers
- byte R_GEN_CONFIG[4];
-#endif
-#if USE_GROUP__General_port_configuration_registers
- byte R_PORT_PA_SET[4];
-#endif
-#if USE_GROUP__General_config_registers
- byte R_GEN_CONFIG_II[4];
-#endif
-#if USE_GROUP__General_port_configuration_registers
- byte R_PORT_PB_SET[4];
-#endif
-#if USE_GROUP__DMA_registers
- byte R_SET_EOP[4];
-#endif
-#if USE_GROUP__ATA_interface_registers || \
- USE_GROUP__Parallel_printer_port_registers || \
- USE_GROUP__SCSI_registers || \
- USE_GROUP__Shared_RAM_interface_registers
- byte R_ATA_CTRL_DATA[4];
- byte R_ATA_CONFIG[4];
-#endif
-#if USE_GROUP__Parallel_printer_port_registers
- byte R_PAR0_DELAY[4];
-#endif
-#if USE_GROUP__Parallel_printer_port_registers || \
- USE_GROUP__SCSI_registers || \
- USE_GROUP__USB_interface_control_registers
- byte R_PAR1_CTRL_DATA[4];
-#endif
-#if USE_GROUP__Parallel_printer_port_registers || \
- USE_GROUP__SCSI_registers
- byte R_PAR1_CONFIG[4];
-#endif
-#if USE_GROUP__Parallel_printer_port_registers
- byte R_PAR1_DELAY[4];
-#endif
-#if USE_GROUP__Serial_port_registers
- byte R_ALT_SER_BAUDRATE[4];
- byte R_SERIAL0_CTRL[4];
- byte R_SERIAL0_XOFF[4];
-#endif
-#if USE_GROUP__Serial_port_registers || \
- USE_GROUP__Syncrounous_serial_port_registers || \
- USE_GROUP__USB_interface_control_registers
- byte R_SERIAL1_CTRL[4];
-#endif
-#if USE_GROUP__Serial_port_registers || \
- USE_GROUP__Syncrounous_serial_port_registers
- byte R_SERIAL1_XOFF[4];
-#endif
-#if USE_GROUP__Serial_port_registers
- byte R_SERIAL2_CTRL[4];
- byte R_SERIAL2_XOFF[4];
-#endif
-#if USE_GROUP__Serial_port_registers || \
- USE_GROUP__Syncrounous_serial_port_registers
- byte R_SERIAL3_CTRL[4];
- byte R_SERIAL3_XOFF[4];
-#endif
-#if USE_GROUP__Network_interface_registers
- byte R_NETWORK_SA_0[4];
- byte R_NETWORK_SA_1[4];
- byte R_NETWORK_SA_2[4];
- byte R_NETWORK_GA_0[4];
- byte R_NETWORK_GA_1[4];
- byte R_NETWORK_REC_CONFIG[4];
- byte R_NETWORK_GEN_CONFIG[4];
- byte R_NETWORK_TR_CTRL[4];
- byte R_NETWORK_MGM_CTRL[4];
-#endif
-#if USE_GROUP__Interrupt_mask_and_status_registers
- byte R_IRQ_MASK0_CLR[4];
- byte R_IRQ_MASK0_SET[4];
- byte R_IRQ_MASK1_CLR[4];
- byte R_IRQ_MASK1_SET[4];
- byte R_IRQ_MASK2_CLR[4];
- byte R_IRQ_MASK2_SET[4];
- byte R_VECT_MASK_CLR[4];
- byte R_VECT_MASK_SET[4];
-#endif
-#if USE_GROUP__Timer_registers
- byte R_CLOCK_PRESCALE[4];
- byte R_SYNC_SERIAL_PRESCALE[4];
-#endif
-#if USE_GROUP__Test_mode_registers
- byte R_TEST_MODE[4];
-#endif
-#if USE_GROUP__DMA_registers
- byte R_DMA_CH0_CLR_INTR[1];
- byte R_DMA_CH1_CLR_INTR[1];
- byte R_DMA_CH2_CLR_INTR[1];
- byte R_DMA_CH3_CLR_INTR[1];
- byte R_DMA_CH4_CLR_INTR[1];
- byte R_DMA_CH8_SUB0_CLR_INTR[1];
- byte R_DMA_CH5_CLR_INTR[1];
- byte R_DMA_CH8_SUB1_CLR_INTR[1];
- byte R_DMA_CH6_CLR_INTR[1];
- byte R_DMA_CH8_SUB2_CLR_INTR[1];
- byte R_DMA_CH7_CLR_INTR[1];
- byte R_DMA_CH8_SUB3_CLR_INTR[1];
- byte R_DMA_CH8_CLR_INTR[1];
- byte R_DMA_CH9_CLR_INTR[1];
-#endif
-#if USE_GROUP__USB_interface_control_registers
- byte R_USB_IRQ_MASK_SET[2];
- byte R_USB_IRQ_MASK_CLR[2];
-#endif
-#if USE_GROUP__MMU_registers
- byte R_MMU_CONFIG[4];
- byte R_MMU_KBASE_LO[4];
- byte R_MMU_KBASE_HI[4];
-#endif
-} reg_shadow_type__hwregs;
-
-#else /* REG_NO_SHADOW */
-
-typedef const udword reg_shadow_type__hwregs;
-
-#endif /* REG_NO_SHADOW */
-
-extern reg_shadow_type__hwregs reg_shadow__hwregs;
-
-#if REG_DEBUG
-
-/*
- * Only write only registers need an initiated flag.
- * Flag is set to all ones at startup, and cleared to
- * zero when initiated.
- */
-
-#ifndef REG_NO_SHADOW
-
-typedef struct {
-#if USE_GROUP__Bus_interface_configuration_registers
- byte R_WAITSTATES[4];
- byte R_BUS_CONFIG[4];
- byte R_DRAM_TIMING[4];
- byte R_DRAM_CONFIG[4];
-#endif
-#if USE_GROUP__External_DMA_registers
- byte R_EXT_DMA_0_CMD[4];
- byte R_EXT_DMA_0_ADDR[4];
- byte R_EXT_DMA_1_CMD[4];
- byte R_EXT_DMA_1_ADDR[4];
-#endif
-#if USE_GROUP__Timer_registers
- byte R_TIMER_CTRL[4];
- byte R_WATCHDOG[4];
-#endif
-#if USE_GROUP__General_config_registers
- byte R_GEN_CONFIG[4];
-#endif
-#if USE_GROUP__General_port_configuration_registers
- byte R_PORT_PA_SET[4];
-#endif
-#if USE_GROUP__General_config_registers
- byte R_GEN_CONFIG_II[4];
-#endif
-#if USE_GROUP__General_port_configuration_registers
- byte R_PORT_PB_SET[4];
-#endif
-#if USE_GROUP__DMA_registers
- byte R_SET_EOP[4];
-#endif
-#if USE_GROUP__ATA_interface_registers || \
- USE_GROUP__Parallel_printer_port_registers || \
- USE_GROUP__SCSI_registers || \
- USE_GROUP__Shared_RAM_interface_registers
- byte R_ATA_CTRL_DATA[4];
- byte R_ATA_CONFIG[4];
-#endif
-#if USE_GROUP__Parallel_printer_port_registers
- byte R_PAR0_DELAY[4];
-#endif
-#if USE_GROUP__Parallel_printer_port_registers || \
- USE_GROUP__SCSI_registers || \
- USE_GROUP__USB_interface_control_registers
- byte R_PAR1_CTRL_DATA[4];
-#endif
-#if USE_GROUP__Parallel_printer_port_registers || \
- USE_GROUP__SCSI_registers
- byte R_PAR1_CONFIG[4];
-#endif
-#if USE_GROUP__Parallel_printer_port_registers
- byte R_PAR1_DELAY[4];
-#endif
-#if USE_GROUP__Serial_port_registers
- byte R_ALT_SER_BAUDRATE[4];
- byte R_SERIAL0_CTRL[4];
- byte R_SERIAL0_XOFF[4];
-#endif
-#if USE_GROUP__Serial_port_registers || \
- USE_GROUP__Syncrounous_serial_port_registers || \
- USE_GROUP__USB_interface_control_registers
- byte R_SERIAL1_CTRL[4];
-#endif
-#if USE_GROUP__Serial_port_registers || \
- USE_GROUP__Syncrounous_serial_port_registers
- byte R_SERIAL1_XOFF[4];
-#endif
-#if USE_GROUP__Serial_port_registers
- byte R_SERIAL2_CTRL[4];
- byte R_SERIAL2_XOFF[4];
-#endif
-#if USE_GROUP__Serial_port_registers || \
- USE_GROUP__Syncrounous_serial_port_registers
- byte R_SERIAL3_CTRL[4];
- byte R_SERIAL3_XOFF[4];
-#endif
-#if USE_GROUP__Network_interface_registers
- byte R_NETWORK_SA_0[4];
- byte R_NETWORK_SA_1[4];
- byte R_NETWORK_SA_2[4];
- byte R_NETWORK_GA_0[4];
- byte R_NETWORK_GA_1[4];
- byte R_NETWORK_REC_CONFIG[4];
- byte R_NETWORK_GEN_CONFIG[4];
- byte R_NETWORK_TR_CTRL[4];
- byte R_NETWORK_MGM_CTRL[4];
-#endif
-#if USE_GROUP__Interrupt_mask_and_status_registers
- byte R_IRQ_MASK0_CLR[4];
- byte R_IRQ_MASK0_SET[4];
- byte R_IRQ_MASK1_CLR[4];
- byte R_IRQ_MASK1_SET[4];
- byte R_IRQ_MASK2_CLR[4];
- byte R_IRQ_MASK2_SET[4];
- byte R_VECT_MASK_CLR[4];
- byte R_VECT_MASK_SET[4];
-#endif
-#if USE_GROUP__Timer_registers
- byte R_CLOCK_PRESCALE[4];
- byte R_SYNC_SERIAL_PRESCALE[4];
-#endif
-#if USE_GROUP__Test_mode_registers
- byte R_TEST_MODE[4];
-#endif
-#if USE_GROUP__DMA_registers
- byte R_DMA_CH0_CLR_INTR[1];
- byte R_DMA_CH1_CLR_INTR[1];
- byte R_DMA_CH2_CLR_INTR[1];
- byte R_DMA_CH3_CLR_INTR[1];
- byte R_DMA_CH4_CLR_INTR[1];
- byte R_DMA_CH8_SUB0_CLR_INTR[1];
- byte R_DMA_CH5_CLR_INTR[1];
- byte R_DMA_CH8_SUB1_CLR_INTR[1];
- byte R_DMA_CH6_CLR_INTR[1];
- byte R_DMA_CH8_SUB2_CLR_INTR[1];
- byte R_DMA_CH7_CLR_INTR[1];
- byte R_DMA_CH8_SUB3_CLR_INTR[1];
- byte R_DMA_CH8_CLR_INTR[1];
- byte R_DMA_CH9_CLR_INTR[1];
-#endif
-#if USE_GROUP__USB_interface_control_registers
- byte R_USB_IRQ_MASK_SET[2];
- byte R_USB_IRQ_MASK_CLR[2];
-#endif
-#if USE_GROUP__MMU_registers
- byte R_MMU_CONFIG[4];
- byte R_MMU_KBASE_LO[4];
- byte R_MMU_KBASE_HI[4];
-#endif
-} reg_initiated_type__hwregs;
-
-#else /* REG_NO_SHADOW */
-
-typedef const udword reg_initiated_type__hwregs;
-
-#endif /* REG_NO_SHADOW */
-
-extern reg_initiated_type__hwregs reg_initiated__hwregs;
-
-#endif /* REG_DEBUG */
-
-extern void init_shadow__hwregs();
-
-#endif /* __ASSEMBLER__ */
-
-
-/********************** CONSTANT AND MACRO SECTION *********************/
-#ifndef __REG_GENERAL_2_H__
-#define __REG_GENERAL_2_H__
-
-/*
-** This part of hwregs.h is common to all shadow
-** register modules, and should therefore only be included once to
-** avoid macro redefinitions.
-*/
-
-#ifndef __ASSEMBLER__
-
-/*
- * Register type-casts
- */
-#define REG_TYPECAST_UDWORD (volatile udword*)
-#define REG_TYPECAST_RO_UDWORD (const volatile udword*)
-#define REG_TYPECAST_UWORD (volatile uword*)
-#define REG_TYPECAST_RO_UWORD (const volatile uword*)
-#define REG_TYPECAST_BYTE (volatile byte*)
-#define REG_TYPECAST_RO_BYTE (const volatile byte*)
-
-/*
- * Shadow register type-casts
- */
-#define REG_STYPECAST_UDWORD (udword*)
-#define REG_STYPECAST_UWORD (uword*)
-#define REG_STYPECAST_BYTE (byte*)
-
-#else
-
-/*
- * Register type-casts
- */
-#define REG_TYPECAST_UDWORD
-#define REG_TYPECAST_RO_UDWORD
-#define REG_TYPECAST_UWORD
-#define REG_TYPECAST_RO_UWORD
-#define REG_TYPECAST_BYTE
-#define REG_TYPECAST_RO_BYTE
-
-/*
- * Shadow register type-casts
- */
-#define REG_STYPECAST_UDWORD
-#define REG_STYPECAST_UWORD
-#define REG_STYPECAST_BYTE
-
-#endif
-
-
-#define REG_UDWORD udword
-#define REG_UWORD uword
-#define REG_BYTE byte
-
-#define REG__on 0xffffffffU
-#define REG__off 0
-
-#endif /* __REG_GENERAL_2_H__ */
-
-#include "hwregs_int.h"
-
-#ifndef __REG_GENERAL_3_H__
-#define __REG_GENERAL_3_H__
-
-/*
-** This part of hwregs.h is common to all shadow
-** register modules, and should therefore only be included once to
-** avoid macro redefinitions.
-*/
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_GET
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*#
-*# RETURNS : Value of field field in register reg.
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR.
-*#
-*# DESCRIPTION : Read a field in a register. Also see description
-*# of REG_GET_WO, REG_GET_RO, and REG_GET_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_GET(reg,field) ( \
- reg##__GET(reg##_, field##_) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_IGET
-*#
-*# PARAMETERS : i : Interface number.
-*# reg : Name of a register.
-*# field : Name of a field.
-*#
-*# RETURNS : Value of field field in register reg.
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR, and REG_IERROR.
-*#
-*# DESCRIPTION : Read a field in a register for interface i.
-*# Also see description of REG_IGET_WO, REG_IGET_RO,
-*# and REG_IGET_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_IGET(i,reg,field) ( \
- reg##__IGET(i, reg##_, field##_) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VGET
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*# var : Variable or value to read from.
-*#
-*# RETURNS : Value of field field in variable var.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Interprets variable var as register reg, and read field
-*# field from variable var.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*#**********************************************************************/
-
-#define REG_VGET(reg,field,var) ( \
- ((reg##__TYPE var) & reg##__##field##__##field##__MASK) >> \
- reg##__##field##__BITNR \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*# val : Value to write to field.
-*#
-*# RETURNS : Integer value written to complete register.
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR and REG_VERROR.
-*#
-*# DESCRIPTION : Write val parameter to field field in register reg.
-*# Parameter reg must be a write only or read write
-*# register. Also see description of REG_SET_WO, and
-*# REG_SET_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_SET(reg,field,val) ( \
- reg##__SET(reg##_, field##_, val) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_ISET
-*#
-*# PARAMETERS : i : Interface number.
-*# reg : Name of a register.
-*# field : Name of a field.
-*# val : Value to write to field.
-*#
-*# RETURNS : Integer value written to complete register.
-*#
-*# SIDE EFFECTS: May evaluate REG_IERROR, REG_SERROR, and REG_VERROR.
-*#
-*# DESCRIPTION : Write val parameter to field field in register reg
-*# of interface i. Parameter reg must be a write only
-*# or read write register. Also see description of
-*# REG_ISET_WO, and REG_ISET_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_ISET(i,reg,field,val) ( \
- reg##__ISET(i, reg##_, field##_, val) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VSET
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*# val : Value to write to field.
-*# var : Variable to write to.
-*#
-*# RETURNS : Integer value of variable var after write.
-*#
-*# SIDE EFFECTS: May evaluate REG_VERROR.
-*#
-*# DESCRIPTION : Interpret variable var as register reg, and write val
-*# parameter to field field in variable var.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_VSET(reg,field,val,var) ( \
- var = \
- ((reg##__TYPE var) & REG_IMASK (reg##_, field##_)) | \
- (reg##__##field##__##field##__VAL(reg##_, field##_, val) << \
- reg##__##field##__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET_VAL
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*# val : Integer value to write to symbolic field.
-*#
-*# RETURNS : Integer value written to complete register.
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR and REG_VERROR.
-*#
-*# DESCRIPTION : Write val parameter to field field in register reg.
-*# Parameter reg must be a write only or read write register.
-*# Also see description of REG_SET_VAL_WO, and REG_SET_VAL_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_SET_VAL(reg,field,val) ( \
- reg##__SET_VAL(reg##_, field##_, val) \
-)
-
-/*
- * See end of file for these.
- *
- * #define REG_SET__register-name
- * #define REG_SET__register-name__SHADOW
- * #define REG_MASK__register-name
- * #define REG_VAL__register-name
- */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_EQL
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*# val : Value to compare with field.
-*#
-*# RETURNS : TRUE, FALSE
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR and REG_VERROR.
-*#
-*# DESCRIPTION : Compare val parameter with field field in register reg.
-*# Also description of REG_EQL_WO, REG_EQL_RO, and
-*# REG_EQL_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-#define REG_EQL(reg,field,val) ( \
- reg##__EQL(reg##_, field##_, val) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_IEQL
-*#
-*# PARAMETERS : i : Interface number.
-*# reg : Name of a register.
-*# field : Name of a field.
-*# val : Value to compare with field.
-*#
-*# RETURNS : TRUE, FALSE
-*#
-*# SIDE EFFECTS: May evaluate REG_VERROR, REG_IERROR, and REG_SERROR.
-*#
-*# DESCRIPTION : Compare val parameter with field field in register reg
-*# of interface i. Also see description of REG_IEQL_WO,
-*# REG_IEQ_RO, and REG_IEQL_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_IEQL(i,reg,field,val) ( \
- reg##__IEQL(i,reg##_,field##_,val) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VEQL
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*# val : Value to compare with field.
-*# var : Variable (or value) to compare with.
-*#
-*# RETURNS : TRUE, FALSE
-*#
-*# SIDE EFFECTS: May evaluate REG_VERROR.
-*#
-*# DESCRIPTION : Interprets variable var as register reg, and compare
-*# compare field field with parameter val.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_VEQL(reg,field,val,var) ( \
- ( ((reg##__TYPE (var)) & reg##__##field##__##field##__MASK) >> \
- reg##__##field##__BITNR \
- ) == reg##__##field##__##field##__VAL(reg##_, field##_, val) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*# val : A symbolic constant.
-*#
-*# RETURNS : val or (val << REG_VERROR()) macro.
-*#
-*# SIDE EFFECTS: May evaluate REG_VERROR macro.
-*#
-*# DESCRIPTION : Convert a symbolic constant to an integer value.
-*# Intended to be used for enumerated fields. Also
-*# Also works for value fields, in which case the val
-*# parameter is checked for range and returned if OK,
-*# and if val is out of range (val << REG_VERROR) is
-*# returned. Also see description of REG_VAL_VAL, and
-*# REG_VAL_ENUM.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg and field parameters when
-*# passing on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL(reg,field,val) ( \
- reg##__##field##__##field##__VAL(reg##_, field##_, val) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_CHK_VAL
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field.
-*# val : An integer value.
-*#
-*# RETURNS : 1 if val is within allowed range for field, otherwise 0.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Check if parameter val is within the field range,
-*# and return 1 if it is, otherwise 0.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*#**********************************************************************/
-
-#define REG_CHK_VAL(reg,field,val) ( \
- (udword)(~(val)) <= (udword)(~(reg##__##field##__MIN)) && \
- (udword)(val) <= (udword)(reg##__##field##__MAX) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_RD
-*#
-*# PARAMETERS : reg : Name of a register.
-*#
-*# RETURNS : Contents of register reg.
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR.
-*#
-*# DESCRIPTION : Read contents of register reg. Also see description of
-*# REG_RD_WO, REG_RD_RO, and REG_RD_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg parameter when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_RD(reg) ( \
- reg##__RD(reg##_) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_IRD
-*#
-*# PARAMETERS : i : Interface number.
-*# reg : Name of a register.
-*#
-*# RETURNS : Contents of register reg.
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR and REG_IERROR.
-*#
-*# DESCRIPTION : Read contents of register reg. Also see description of
-*# REG_IRD_WO, REG_IRD_RO, and REG_IRD_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg parameter when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_IRD(i,reg) ( \
- reg##__IRD(i,reg##_) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_WR
-*#
-*# PARAMETERS : reg : Name of a register.
-*# var : Variable (or value) to write to reg.
-*#
-*# RETURNS : integer value written to register reg.
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR.
-*#
-*# DESCRIPTION : Write value of var parameter to register reg. Also see
-*# description of REG_WR_WO, and REG_WR_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg parameter when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_WR(reg,var) ( \
- reg##__WR(reg##_,var) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_IWR
-*#
-*# PARAMETERS : i : Interface number.
-*# reg : Name of a register.
-*# var : Variable (or value) to write to reg.
-*#
-*# RETURNS : integer value written to register reg.
-*#
-*# SIDE EFFECTS: May evaluate REG_SERROR.
-*#
-*# DESCRIPTION : Write value of var parameter to register reg of
-*# interface i. Also see description of REG_IWR_WO,
-*# and REG_IWR_RW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to reg parameter when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_IWR(i,reg,var) ( \
- reg##__IWR(i##_, reg##_, var) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_ADDR
-*#
-*# PARAMETERS : reg : Name of a register.
-*#
-*# RETURNS : Address to register reg.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Calculate address to register reg.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*#**********************************************************************/
-
-#define REG_ADDR(reg) ( \
- reg##__ADDR \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_BITNR
-*#
-*# PARAMETERS : reg : Name of a register.
-*# field : Name of a field in register reg.
-*#
-*# RETURNS : Position of least significant bit of field in reg..
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Calculate position of least significant bit of
-*# field field in register reg.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*#**********************************************************************/
-
-#define REG_BITNR(reg,field) ( \
- reg##__##field##__BITNR \
-)
-
-#endif /* __REG_GENERAL_3_H__ */
-
-
-/*
- * R_ALT_SER_BAUDRATE
- * - type: WO
- * - addr: 0xb000005c
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_ALT_SER_BAUDRATE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_ALT_SER_BAUDRATE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_ALT_SER_BAUDRATE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_ALT_SER_BAUDRATE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_ALT_SER_BAUDRATE__SADDR = ( \
- REG_INITIATED(R_ALT_SER_BAUDRATE_) \
- REG_VAL__R_ALT_SER_BAUDRATE_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_ALT_SER_BAUDRATE__WRITE(R_ALT_SER_BAUDRATE__ADDR, *R_ALT_SER_BAUDRATE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_ALT_SER_BAUDRATE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_ALT_SER_BAUDRATE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_ALT_SER_BAUDRATE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_ALT_SER_BAUDRATE__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_ALT_SER_BAUDRATE__SADDR = ( \
- REG_INITIATED(R_ALT_SER_BAUDRATE_) \
- REG_VAL__R_ALT_SER_BAUDRATE_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_ALT_SER_BAUDRATE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_ALT_SER_BAUDRATE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_ALT_SER_BAUDRATE__ser3_tr__##f1##__MASK & REG__##v1) | \
- (R_ALT_SER_BAUDRATE__ser3_rec__##f2##__MASK & REG__##v2) | \
- (R_ALT_SER_BAUDRATE__ser2_tr__##f3##__MASK & REG__##v3) | \
- (R_ALT_SER_BAUDRATE__ser2_rec__##f4##__MASK & REG__##v4) | \
- (R_ALT_SER_BAUDRATE__ser1_tr__##f5##__MASK & REG__##v5) | \
- (R_ALT_SER_BAUDRATE__ser1_rec__##f6##__MASK & REG__##v6) | \
- (R_ALT_SER_BAUDRATE__ser0_tr__##f7##__MASK & REG__##v7) | \
- (R_ALT_SER_BAUDRATE__ser0_rec__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ALT_SER_BAUDRATE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ALT_SER_BAUDRATE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_ALT_SER_BAUDRATE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_ALT_SER_BAUDRATE__ser3_tr__##f1##__VAL(R_ALT_SER_BAUDRATE_, ser3_tr_, v1) << R_ALT_SER_BAUDRATE__ser3_tr__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser3_rec__##f2##__VAL(R_ALT_SER_BAUDRATE_, ser3_rec_, v2) << R_ALT_SER_BAUDRATE__ser3_rec__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser2_tr__##f3##__VAL(R_ALT_SER_BAUDRATE_, ser2_tr_, v3) << R_ALT_SER_BAUDRATE__ser2_tr__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser2_rec__##f4##__VAL(R_ALT_SER_BAUDRATE_, ser2_rec_, v4) << R_ALT_SER_BAUDRATE__ser2_rec__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser1_tr__##f5##__VAL(R_ALT_SER_BAUDRATE_, ser1_tr_, v5) << R_ALT_SER_BAUDRATE__ser1_tr__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser1_rec__##f6##__VAL(R_ALT_SER_BAUDRATE_, ser1_rec_, v6) << R_ALT_SER_BAUDRATE__ser1_rec__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser0_tr__##f7##__VAL(R_ALT_SER_BAUDRATE_, ser0_tr_, v7) << R_ALT_SER_BAUDRATE__ser0_tr__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser0_rec__##f8##__VAL(R_ALT_SER_BAUDRATE_, ser0_rec_, v8) << R_ALT_SER_BAUDRATE__ser0_rec__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ALT_SER_BAUDRATE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ALT_SER_BAUDRATE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_ALT_SER_BAUDRATE_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_ALT_SER_BAUDRATE__ser3_tr__##f1_##_VAL(R_ALT_SER_BAUDRATE_, ser3_tr_, v1) << R_ALT_SER_BAUDRATE__ser3_tr__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser3_rec__##f2_##_VAL(R_ALT_SER_BAUDRATE_, ser3_rec_, v2) << R_ALT_SER_BAUDRATE__ser3_rec__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser2_tr__##f3_##_VAL(R_ALT_SER_BAUDRATE_, ser2_tr_, v3) << R_ALT_SER_BAUDRATE__ser2_tr__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser2_rec__##f4_##_VAL(R_ALT_SER_BAUDRATE_, ser2_rec_, v4) << R_ALT_SER_BAUDRATE__ser2_rec__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser1_tr__##f5_##_VAL(R_ALT_SER_BAUDRATE_, ser1_tr_, v5) << R_ALT_SER_BAUDRATE__ser1_tr__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser1_rec__##f6_##_VAL(R_ALT_SER_BAUDRATE_, ser1_rec_, v6) << R_ALT_SER_BAUDRATE__ser1_rec__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser0_tr__##f7_##_VAL(R_ALT_SER_BAUDRATE_, ser0_tr_, v7) << R_ALT_SER_BAUDRATE__ser0_tr__BITNR) | \
- (R_ALT_SER_BAUDRATE__ser0_rec__##f8_##_VAL(R_ALT_SER_BAUDRATE_, ser0_rec_, v8) << R_ALT_SER_BAUDRATE__ser0_rec__BITNR) \
-)
-
-#endif
-
-/*
- * R_ATA_CONFIG
- * - type: WO
- * - addr: 0xb0000044
- * - group: ATA interface registers
- */
-
-#if USE_GROUP__ATA_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_ATA_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_ATA_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_ATA_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_ATA_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_ATA_CONFIG__SADDR = ( \
- REG_INITIATED(R_ATA_CONFIG_) \
- REG_VAL__R_ATA_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ), \
- R_ATA_CONFIG__WRITE(R_ATA_CONFIG__ADDR, *R_ATA_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_ATA_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_ATA_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_ATA_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_ATA_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_ATA_CONFIG__SADDR = ( \
- REG_INITIATED(R_ATA_CONFIG_) \
- REG_VAL__R_ATA_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_ATA_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_ATA_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_ATA_CONFIG__enable__##f1##__MASK & REG__##v1) | \
- (R_ATA_CONFIG__dma_strobe__##f2##__MASK & REG__##v2) | \
- (R_ATA_CONFIG__dma_hold__##f3##__MASK & REG__##v3) | \
- (R_ATA_CONFIG__pio_setup__##f4##__MASK & REG__##v4) | \
- (R_ATA_CONFIG__pio_strobe__##f5##__MASK & REG__##v5) | \
- (R_ATA_CONFIG__pio_hold__##f6##__MASK & REG__##v6) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ATA_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ATA_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_ATA_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_ATA_CONFIG__enable__##f1##__VAL(R_ATA_CONFIG_, enable_, v1) << R_ATA_CONFIG__enable__BITNR) | \
- (R_ATA_CONFIG__dma_strobe__##f2##__VAL(R_ATA_CONFIG_, dma_strobe_, v2) << R_ATA_CONFIG__dma_strobe__BITNR) | \
- (R_ATA_CONFIG__dma_hold__##f3##__VAL(R_ATA_CONFIG_, dma_hold_, v3) << R_ATA_CONFIG__dma_hold__BITNR) | \
- (R_ATA_CONFIG__pio_setup__##f4##__VAL(R_ATA_CONFIG_, pio_setup_, v4) << R_ATA_CONFIG__pio_setup__BITNR) | \
- (R_ATA_CONFIG__pio_strobe__##f5##__VAL(R_ATA_CONFIG_, pio_strobe_, v5) << R_ATA_CONFIG__pio_strobe__BITNR) | \
- (R_ATA_CONFIG__pio_hold__##f6##__VAL(R_ATA_CONFIG_, pio_hold_, v6) << R_ATA_CONFIG__pio_hold__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ATA_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ATA_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_ATA_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6) ( \
- (R_ATA_CONFIG__enable__##f1_##_VAL(R_ATA_CONFIG_, enable_, v1) << R_ATA_CONFIG__enable__BITNR) | \
- (R_ATA_CONFIG__dma_strobe__##f2_##_VAL(R_ATA_CONFIG_, dma_strobe_, v2) << R_ATA_CONFIG__dma_strobe__BITNR) | \
- (R_ATA_CONFIG__dma_hold__##f3_##_VAL(R_ATA_CONFIG_, dma_hold_, v3) << R_ATA_CONFIG__dma_hold__BITNR) | \
- (R_ATA_CONFIG__pio_setup__##f4_##_VAL(R_ATA_CONFIG_, pio_setup_, v4) << R_ATA_CONFIG__pio_setup__BITNR) | \
- (R_ATA_CONFIG__pio_strobe__##f5_##_VAL(R_ATA_CONFIG_, pio_strobe_, v5) << R_ATA_CONFIG__pio_strobe__BITNR) | \
- (R_ATA_CONFIG__pio_hold__##f6_##_VAL(R_ATA_CONFIG_, pio_hold_, v6) << R_ATA_CONFIG__pio_hold__BITNR) \
-)
-
-#endif
-
-/*
- * R_ATA_CTRL_DATA
- * - type: WO
- * - addr: 0xb0000040
- * - group: ATA interface registers
- */
-
-#if USE_GROUP__ATA_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_ATA_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_ATA_CTRL_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_ATA_CTRL_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_ATA_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_ATA_CTRL_DATA__SADDR = ( \
- REG_INITIATED(R_ATA_CTRL_DATA_) \
- REG_VAL__R_ATA_CTRL_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ), \
- R_ATA_CTRL_DATA__WRITE(R_ATA_CTRL_DATA__ADDR, *R_ATA_CTRL_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_ATA_CTRL_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_ATA_CTRL_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_ATA_CTRL_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_ATA_CTRL_DATA__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_ATA_CTRL_DATA__SADDR = ( \
- REG_INITIATED(R_ATA_CTRL_DATA_) \
- REG_VAL__R_ATA_CTRL_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_ATA_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_ATA_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_ATA_CTRL_DATA__sel__##f1##__MASK & REG__##v1) | \
- (R_ATA_CTRL_DATA__cs1__##f2##__MASK & REG__##v2) | \
- (R_ATA_CTRL_DATA__cs0__##f3##__MASK & REG__##v3) | \
- (R_ATA_CTRL_DATA__addr__##f4##__MASK & REG__##v4) | \
- (R_ATA_CTRL_DATA__rw__##f5##__MASK & REG__##v5) | \
- (R_ATA_CTRL_DATA__src_dst__##f6##__MASK & REG__##v6) | \
- (R_ATA_CTRL_DATA__handsh__##f7##__MASK & REG__##v7) | \
- (R_ATA_CTRL_DATA__multi__##f8##__MASK & REG__##v8) | \
- (R_ATA_CTRL_DATA__dma_size__##f9##__MASK & REG__##v9) | \
- (R_ATA_CTRL_DATA__data__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ATA_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ATA_CTRL_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_ATA_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_ATA_CTRL_DATA__sel__##f1##__VAL(R_ATA_CTRL_DATA_, sel_, v1) << R_ATA_CTRL_DATA__sel__BITNR) | \
- (R_ATA_CTRL_DATA__cs1__##f2##__VAL(R_ATA_CTRL_DATA_, cs1_, v2) << R_ATA_CTRL_DATA__cs1__BITNR) | \
- (R_ATA_CTRL_DATA__cs0__##f3##__VAL(R_ATA_CTRL_DATA_, cs0_, v3) << R_ATA_CTRL_DATA__cs0__BITNR) | \
- (R_ATA_CTRL_DATA__addr__##f4##__VAL(R_ATA_CTRL_DATA_, addr_, v4) << R_ATA_CTRL_DATA__addr__BITNR) | \
- (R_ATA_CTRL_DATA__rw__##f5##__VAL(R_ATA_CTRL_DATA_, rw_, v5) << R_ATA_CTRL_DATA__rw__BITNR) | \
- (R_ATA_CTRL_DATA__src_dst__##f6##__VAL(R_ATA_CTRL_DATA_, src_dst_, v6) << R_ATA_CTRL_DATA__src_dst__BITNR) | \
- (R_ATA_CTRL_DATA__handsh__##f7##__VAL(R_ATA_CTRL_DATA_, handsh_, v7) << R_ATA_CTRL_DATA__handsh__BITNR) | \
- (R_ATA_CTRL_DATA__multi__##f8##__VAL(R_ATA_CTRL_DATA_, multi_, v8) << R_ATA_CTRL_DATA__multi__BITNR) | \
- (R_ATA_CTRL_DATA__dma_size__##f9##__VAL(R_ATA_CTRL_DATA_, dma_size_, v9) << R_ATA_CTRL_DATA__dma_size__BITNR) | \
- (R_ATA_CTRL_DATA__data__##f10##__VAL(R_ATA_CTRL_DATA_, data_, v10) << R_ATA_CTRL_DATA__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ATA_CTRL_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ATA_CTRL_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_ATA_CTRL_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_ATA_CTRL_DATA__sel__##f1_##_VAL(R_ATA_CTRL_DATA_, sel_, v1) << R_ATA_CTRL_DATA__sel__BITNR) | \
- (R_ATA_CTRL_DATA__cs1__##f2_##_VAL(R_ATA_CTRL_DATA_, cs1_, v2) << R_ATA_CTRL_DATA__cs1__BITNR) | \
- (R_ATA_CTRL_DATA__cs0__##f3_##_VAL(R_ATA_CTRL_DATA_, cs0_, v3) << R_ATA_CTRL_DATA__cs0__BITNR) | \
- (R_ATA_CTRL_DATA__addr__##f4_##_VAL(R_ATA_CTRL_DATA_, addr_, v4) << R_ATA_CTRL_DATA__addr__BITNR) | \
- (R_ATA_CTRL_DATA__rw__##f5_##_VAL(R_ATA_CTRL_DATA_, rw_, v5) << R_ATA_CTRL_DATA__rw__BITNR) | \
- (R_ATA_CTRL_DATA__src_dst__##f6_##_VAL(R_ATA_CTRL_DATA_, src_dst_, v6) << R_ATA_CTRL_DATA__src_dst__BITNR) | \
- (R_ATA_CTRL_DATA__handsh__##f7_##_VAL(R_ATA_CTRL_DATA_, handsh_, v7) << R_ATA_CTRL_DATA__handsh__BITNR) | \
- (R_ATA_CTRL_DATA__multi__##f8_##_VAL(R_ATA_CTRL_DATA_, multi_, v8) << R_ATA_CTRL_DATA__multi__BITNR) | \
- (R_ATA_CTRL_DATA__dma_size__##f9_##_VAL(R_ATA_CTRL_DATA_, dma_size_, v9) << R_ATA_CTRL_DATA__dma_size__BITNR) | \
- (R_ATA_CTRL_DATA__data__##f10_##_VAL(R_ATA_CTRL_DATA_, data_, v10) << R_ATA_CTRL_DATA__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_ATA_STATUS_DATA
- * - type: RO
- * - addr: 0xb0000040
- * - group: ATA interface registers
- */
-
-#if USE_GROUP__ATA_interface_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_ATA_STATUS_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_ATA_STATUS_DATA(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_ATA_STATUS_DATA__busy__##f1##__MASK & REG__##v1) | \
- (R_ATA_STATUS_DATA__tr_rdy__##f2##__MASK & REG__##v2) | \
- (R_ATA_STATUS_DATA__dav__##f3##__MASK & REG__##v3) | \
- (R_ATA_STATUS_DATA__data__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ATA_STATUS_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ATA_STATUS_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_ATA_STATUS_DATA(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_ATA_STATUS_DATA__busy__##f1##__VAL(R_ATA_STATUS_DATA_, busy_, v1) << R_ATA_STATUS_DATA__busy__BITNR) | \
- (R_ATA_STATUS_DATA__tr_rdy__##f2##__VAL(R_ATA_STATUS_DATA_, tr_rdy_, v2) << R_ATA_STATUS_DATA__tr_rdy__BITNR) | \
- (R_ATA_STATUS_DATA__dav__##f3##__VAL(R_ATA_STATUS_DATA_, dav_, v3) << R_ATA_STATUS_DATA__dav__BITNR) | \
- (R_ATA_STATUS_DATA__data__##f4##__VAL(R_ATA_STATUS_DATA_, data_, v4) << R_ATA_STATUS_DATA__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ATA_STATUS_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ATA_STATUS_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_ATA_STATUS_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_ATA_STATUS_DATA__busy__##f1_##_VAL(R_ATA_STATUS_DATA_, busy_, v1) << R_ATA_STATUS_DATA__busy__BITNR) | \
- (R_ATA_STATUS_DATA__tr_rdy__##f2_##_VAL(R_ATA_STATUS_DATA_, tr_rdy_, v2) << R_ATA_STATUS_DATA__tr_rdy__BITNR) | \
- (R_ATA_STATUS_DATA__dav__##f3_##_VAL(R_ATA_STATUS_DATA_, dav_, v3) << R_ATA_STATUS_DATA__dav__BITNR) | \
- (R_ATA_STATUS_DATA__data__##f4_##_VAL(R_ATA_STATUS_DATA_, data_, v4) << R_ATA_STATUS_DATA__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_ATA_TRANSFER_CNT
- * - type: RW
- * - addr: 0xb0000048
- * - group: ATA interface registers
- */
-
-#if USE_GROUP__ATA_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_ATA_TRANSFER_CNT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_ATA_TRANSFER_CNT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_ATA_TRANSFER_CNT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_ATA_TRANSFER_CNT(f1,v1) ( \
- R_ATA_TRANSFER_CNT__WRITE(R_ATA_TRANSFER_CNT__ADDR, ( \
- REG_VAL__R_ATA_TRANSFER_CNT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_ATA_TRANSFER_CNT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_ATA_TRANSFER_CNT(f1,v1) ( \
- (R_ATA_TRANSFER_CNT__count__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ATA_TRANSFER_CNT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ATA_TRANSFER_CNT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_ATA_TRANSFER_CNT(f1,v1) ( \
- (R_ATA_TRANSFER_CNT__count__##f1##__VAL(R_ATA_TRANSFER_CNT_, count_, v1) << R_ATA_TRANSFER_CNT__count__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_ATA_TRANSFER_CNT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_ATA_TRANSFER_CNT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_ATA_TRANSFER_CNT_(f1_,v1) ( \
- (R_ATA_TRANSFER_CNT__count__##f1_##_VAL(R_ATA_TRANSFER_CNT_, count_, v1) << R_ATA_TRANSFER_CNT__count__BITNR) \
-)
-
-#endif
-
-/*
- * R_BUS_CONFIG
- * - type: WO
- * - addr: 0xb0000004
- * - group: Bus interface configuration registers
- */
-
-#if USE_GROUP__Bus_interface_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_BUS_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_BUS_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_BUS_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_BUS_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_BUS_CONFIG__SADDR = ( \
- REG_INITIATED(R_BUS_CONFIG_) \
- REG_VAL__R_BUS_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ), \
- R_BUS_CONFIG__WRITE(R_BUS_CONFIG__ADDR, *R_BUS_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_BUS_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_BUS_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_BUS_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_BUS_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_BUS_CONFIG__SADDR = ( \
- REG_INITIATED(R_BUS_CONFIG_) \
- REG_VAL__R_BUS_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_BUS_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_BUS_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_BUS_CONFIG__sram_type__##f1##__MASK & REG__##v1) | \
- (R_BUS_CONFIG__dma_burst__##f2##__MASK & REG__##v2) | \
- (R_BUS_CONFIG__pcs4_7_wr__##f3##__MASK & REG__##v3) | \
- (R_BUS_CONFIG__pcs0_3_wr__##f4##__MASK & REG__##v4) | \
- (R_BUS_CONFIG__sram_wr__##f5##__MASK & REG__##v5) | \
- (R_BUS_CONFIG__flash_wr__##f6##__MASK & REG__##v6) | \
- (R_BUS_CONFIG__pcs4_7_bw__##f7##__MASK & REG__##v7) | \
- (R_BUS_CONFIG__pcs0_3_bw__##f8##__MASK & REG__##v8) | \
- (R_BUS_CONFIG__sram_bw__##f9##__MASK & REG__##v9) | \
- (R_BUS_CONFIG__flash_bw__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_BUS_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_BUS_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_BUS_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_BUS_CONFIG__sram_type__##f1##__VAL(R_BUS_CONFIG_, sram_type_, v1) << R_BUS_CONFIG__sram_type__BITNR) | \
- (R_BUS_CONFIG__dma_burst__##f2##__VAL(R_BUS_CONFIG_, dma_burst_, v2) << R_BUS_CONFIG__dma_burst__BITNR) | \
- (R_BUS_CONFIG__pcs4_7_wr__##f3##__VAL(R_BUS_CONFIG_, pcs4_7_wr_, v3) << R_BUS_CONFIG__pcs4_7_wr__BITNR) | \
- (R_BUS_CONFIG__pcs0_3_wr__##f4##__VAL(R_BUS_CONFIG_, pcs0_3_wr_, v4) << R_BUS_CONFIG__pcs0_3_wr__BITNR) | \
- (R_BUS_CONFIG__sram_wr__##f5##__VAL(R_BUS_CONFIG_, sram_wr_, v5) << R_BUS_CONFIG__sram_wr__BITNR) | \
- (R_BUS_CONFIG__flash_wr__##f6##__VAL(R_BUS_CONFIG_, flash_wr_, v6) << R_BUS_CONFIG__flash_wr__BITNR) | \
- (R_BUS_CONFIG__pcs4_7_bw__##f7##__VAL(R_BUS_CONFIG_, pcs4_7_bw_, v7) << R_BUS_CONFIG__pcs4_7_bw__BITNR) | \
- (R_BUS_CONFIG__pcs0_3_bw__##f8##__VAL(R_BUS_CONFIG_, pcs0_3_bw_, v8) << R_BUS_CONFIG__pcs0_3_bw__BITNR) | \
- (R_BUS_CONFIG__sram_bw__##f9##__VAL(R_BUS_CONFIG_, sram_bw_, v9) << R_BUS_CONFIG__sram_bw__BITNR) | \
- (R_BUS_CONFIG__flash_bw__##f10##__VAL(R_BUS_CONFIG_, flash_bw_, v10) << R_BUS_CONFIG__flash_bw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_BUS_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_BUS_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_BUS_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_BUS_CONFIG__sram_type__##f1_##_VAL(R_BUS_CONFIG_, sram_type_, v1) << R_BUS_CONFIG__sram_type__BITNR) | \
- (R_BUS_CONFIG__dma_burst__##f2_##_VAL(R_BUS_CONFIG_, dma_burst_, v2) << R_BUS_CONFIG__dma_burst__BITNR) | \
- (R_BUS_CONFIG__pcs4_7_wr__##f3_##_VAL(R_BUS_CONFIG_, pcs4_7_wr_, v3) << R_BUS_CONFIG__pcs4_7_wr__BITNR) | \
- (R_BUS_CONFIG__pcs0_3_wr__##f4_##_VAL(R_BUS_CONFIG_, pcs0_3_wr_, v4) << R_BUS_CONFIG__pcs0_3_wr__BITNR) | \
- (R_BUS_CONFIG__sram_wr__##f5_##_VAL(R_BUS_CONFIG_, sram_wr_, v5) << R_BUS_CONFIG__sram_wr__BITNR) | \
- (R_BUS_CONFIG__flash_wr__##f6_##_VAL(R_BUS_CONFIG_, flash_wr_, v6) << R_BUS_CONFIG__flash_wr__BITNR) | \
- (R_BUS_CONFIG__pcs4_7_bw__##f7_##_VAL(R_BUS_CONFIG_, pcs4_7_bw_, v7) << R_BUS_CONFIG__pcs4_7_bw__BITNR) | \
- (R_BUS_CONFIG__pcs0_3_bw__##f8_##_VAL(R_BUS_CONFIG_, pcs0_3_bw_, v8) << R_BUS_CONFIG__pcs0_3_bw__BITNR) | \
- (R_BUS_CONFIG__sram_bw__##f9_##_VAL(R_BUS_CONFIG_, sram_bw_, v9) << R_BUS_CONFIG__sram_bw__BITNR) | \
- (R_BUS_CONFIG__flash_bw__##f10_##_VAL(R_BUS_CONFIG_, flash_bw_, v10) << R_BUS_CONFIG__flash_bw__BITNR) \
-)
-
-#endif
-
-/*
- * R_BUS_STATUS
- * - type: RO
- * - addr: 0xb0000004
- * - group: Bus interface configuration registers
- */
-
-#if USE_GROUP__Bus_interface_configuration_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_BUS_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_BUS_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_BUS_STATUS__pll_lock_tm__##f1##__MASK & REG__##v1) | \
- (R_BUS_STATUS__both_faults__##f2##__MASK & REG__##v2) | \
- (R_BUS_STATUS__bsen___##f3##__MASK & REG__##v3) | \
- (R_BUS_STATUS__boot__##f4##__MASK & REG__##v4) | \
- (R_BUS_STATUS__flashw__##f5##__MASK & REG__##v5) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_BUS_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_BUS_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_BUS_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_BUS_STATUS__pll_lock_tm__##f1##__VAL(R_BUS_STATUS_, pll_lock_tm_, v1) << R_BUS_STATUS__pll_lock_tm__BITNR) | \
- (R_BUS_STATUS__both_faults__##f2##__VAL(R_BUS_STATUS_, both_faults_, v2) << R_BUS_STATUS__both_faults__BITNR) | \
- (R_BUS_STATUS__bsen___##f3##__VAL(R_BUS_STATUS_, bsen__, v3) << R_BUS_STATUS__bsen___BITNR) | \
- (R_BUS_STATUS__boot__##f4##__VAL(R_BUS_STATUS_, boot_, v4) << R_BUS_STATUS__boot__BITNR) | \
- (R_BUS_STATUS__flashw__##f5##__VAL(R_BUS_STATUS_, flashw_, v5) << R_BUS_STATUS__flashw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_BUS_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_BUS_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_BUS_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5) ( \
- (R_BUS_STATUS__pll_lock_tm__##f1_##_VAL(R_BUS_STATUS_, pll_lock_tm_, v1) << R_BUS_STATUS__pll_lock_tm__BITNR) | \
- (R_BUS_STATUS__both_faults__##f2_##_VAL(R_BUS_STATUS_, both_faults_, v2) << R_BUS_STATUS__both_faults__BITNR) | \
- (R_BUS_STATUS__bsen___##f3_##_VAL(R_BUS_STATUS_, bsen__, v3) << R_BUS_STATUS__bsen___BITNR) | \
- (R_BUS_STATUS__boot__##f4_##_VAL(R_BUS_STATUS_, boot_, v4) << R_BUS_STATUS__boot__BITNR) | \
- (R_BUS_STATUS__flashw__##f5_##_VAL(R_BUS_STATUS_, flashw_, v5) << R_BUS_STATUS__flashw__BITNR) \
-)
-
-#endif
-
-/*
- * R_CLOCK_PRESCALE
- * - type: WO
- * - addr: 0xb00000f0
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_CLOCK_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_CLOCK_PRESCALE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_CLOCK_PRESCALE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_CLOCK_PRESCALE(f1,v1,f2,v2) ( \
- *R_CLOCK_PRESCALE__SADDR = ( \
- REG_INITIATED(R_CLOCK_PRESCALE_) \
- REG_VAL__R_CLOCK_PRESCALE_(f1##_,v1,f2##_,v2) \
- ), \
- R_CLOCK_PRESCALE__WRITE(R_CLOCK_PRESCALE__ADDR, *R_CLOCK_PRESCALE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_CLOCK_PRESCALE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_CLOCK_PRESCALE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_CLOCK_PRESCALE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_CLOCK_PRESCALE__SHADOW(f1,v1,f2,v2) ( \
- *R_CLOCK_PRESCALE__SADDR = ( \
- REG_INITIATED(R_CLOCK_PRESCALE_) \
- REG_VAL__R_CLOCK_PRESCALE_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_CLOCK_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_CLOCK_PRESCALE(f1,v1,f2,v2) ( \
- (R_CLOCK_PRESCALE__ser_presc__##f1##__MASK & REG__##v1) | \
- (R_CLOCK_PRESCALE__tim_presc__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_CLOCK_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_CLOCK_PRESCALE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_CLOCK_PRESCALE(f1,v1,f2,v2) ( \
- (R_CLOCK_PRESCALE__ser_presc__##f1##__VAL(R_CLOCK_PRESCALE_, ser_presc_, v1) << R_CLOCK_PRESCALE__ser_presc__BITNR) | \
- (R_CLOCK_PRESCALE__tim_presc__##f2##__VAL(R_CLOCK_PRESCALE_, tim_presc_, v2) << R_CLOCK_PRESCALE__tim_presc__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_CLOCK_PRESCALE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_CLOCK_PRESCALE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_CLOCK_PRESCALE_(f1_,v1,f2_,v2) ( \
- (R_CLOCK_PRESCALE__ser_presc__##f1_##_VAL(R_CLOCK_PRESCALE_, ser_presc_, v1) << R_CLOCK_PRESCALE__ser_presc__BITNR) | \
- (R_CLOCK_PRESCALE__tim_presc__##f2_##_VAL(R_CLOCK_PRESCALE_, tim_presc_, v2) << R_CLOCK_PRESCALE__tim_presc__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH0_BUF
- * - type: RW
- * - addr: 0xb0000108
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH0_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH0_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH0_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH0_BUF(f1,v1) ( \
- R_DMA_CH0_BUF__WRITE(R_DMA_CH0_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH0_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH0_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH0_BUF(f1,v1) ( \
- (R_DMA_CH0_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_BUF(f1,v1) ( \
- (R_DMA_CH0_BUF__buf__##f1##__VAL(R_DMA_CH0_BUF_, buf_, v1) << R_DMA_CH0_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_BUF_(f1_,v1) ( \
- (R_DMA_CH0_BUF__buf__##f1_##_VAL(R_DMA_CH0_BUF_, buf_, v1) << R_DMA_CH0_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH0_CLR_INTR
- * - type: WO
- * - addr: 0xb00001d1
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH0_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH0_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH0_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH0_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH0_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH0_CLR_INTR_) \
- REG_VAL__R_DMA_CH0_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH0_CLR_INTR__WRITE(R_DMA_CH0_CLR_INTR__ADDR, *R_DMA_CH0_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH0_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH0_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH0_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH0_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH0_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH0_CLR_INTR_) \
- REG_VAL__R_DMA_CH0_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH0_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH0_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH0_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH0_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH0_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH0_CLR_INTR_, clr_eop_, v1) << R_DMA_CH0_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH0_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH0_CLR_INTR_, clr_descr_, v2) << R_DMA_CH0_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH0_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH0_CLR_INTR_, clr_eop_, v1) << R_DMA_CH0_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH0_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH0_CLR_INTR_, clr_descr_, v2) << R_DMA_CH0_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH0_CMD
- * - type: RW
- * - addr: 0xb00001d0
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH0_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH0_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH0_CMD(f1,v1) ( \
- R_DMA_CH0_CMD__WRITE(R_DMA_CH0_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH0_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH0_CMD(f1,v1) ( \
- (R_DMA_CH0_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_CMD(f1,v1) ( \
- (R_DMA_CH0_CMD__cmd__##f1##__VAL(R_DMA_CH0_CMD_, cmd_, v1) << R_DMA_CH0_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_CMD_(f1_,v1) ( \
- (R_DMA_CH0_CMD__cmd__##f1_##_VAL(R_DMA_CH0_CMD_, cmd_, v1) << R_DMA_CH0_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH0_DESCR
- * - type: RW
- * - addr: 0xb000010c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH0_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH0_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH0_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH0_DESCR(f1,v1) ( \
- R_DMA_CH0_DESCR__WRITE(R_DMA_CH0_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH0_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH0_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH0_DESCR(f1,v1) ( \
- (R_DMA_CH0_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_DESCR(f1,v1) ( \
- (R_DMA_CH0_DESCR__descr__##f1##__VAL(R_DMA_CH0_DESCR_, descr_, v1) << R_DMA_CH0_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_DESCR_(f1_,v1) ( \
- (R_DMA_CH0_DESCR__descr__##f1_##_VAL(R_DMA_CH0_DESCR_, descr_, v1) << R_DMA_CH0_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH0_FIRST
- * - type: RW
- * - addr: 0xb00001a0
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH0_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH0_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH0_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH0_FIRST(f1,v1) ( \
- R_DMA_CH0_FIRST__WRITE(R_DMA_CH0_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH0_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH0_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH0_FIRST(f1,v1) ( \
- (R_DMA_CH0_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_FIRST(f1,v1) ( \
- (R_DMA_CH0_FIRST__first__##f1##__VAL(R_DMA_CH0_FIRST_, first_, v1) << R_DMA_CH0_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_FIRST_(f1_,v1) ( \
- (R_DMA_CH0_FIRST__first__##f1_##_VAL(R_DMA_CH0_FIRST_, first_, v1) << R_DMA_CH0_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH0_HWSW
- * - type: RW
- * - addr: 0xb0000100
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH0_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH0_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH0_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH0_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH0_HWSW__WRITE(R_DMA_CH0_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH0_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH0_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH0_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH0_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH0_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH0_HWSW__hw__##f1##__VAL(R_DMA_CH0_HWSW_, hw_, v1) << R_DMA_CH0_HWSW__hw__BITNR) | \
- (R_DMA_CH0_HWSW__sw__##f2##__VAL(R_DMA_CH0_HWSW_, sw_, v2) << R_DMA_CH0_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH0_HWSW__hw__##f1_##_VAL(R_DMA_CH0_HWSW_, hw_, v1) << R_DMA_CH0_HWSW__hw__BITNR) | \
- (R_DMA_CH0_HWSW__sw__##f2_##_VAL(R_DMA_CH0_HWSW_, sw_, v2) << R_DMA_CH0_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH0_NEXT
- * - type: RW
- * - addr: 0xb0000104
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH0_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH0_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH0_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH0_NEXT(f1,v1) ( \
- R_DMA_CH0_NEXT__WRITE(R_DMA_CH0_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH0_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH0_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH0_NEXT(f1,v1) ( \
- (R_DMA_CH0_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_NEXT(f1,v1) ( \
- (R_DMA_CH0_NEXT__next__##f1##__VAL(R_DMA_CH0_NEXT_, next_, v1) << R_DMA_CH0_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_NEXT_(f1_,v1) ( \
- (R_DMA_CH0_NEXT__next__##f1_##_VAL(R_DMA_CH0_NEXT_, next_, v1) << R_DMA_CH0_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH0_STATUS
- * - type: RO
- * - addr: 0xb00001d2
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH0_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH0_STATUS(f1,v1) ( \
- (R_DMA_CH0_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_STATUS(f1,v1) ( \
- (R_DMA_CH0_STATUS__avail__##f1##__VAL(R_DMA_CH0_STATUS_, avail_, v1) << R_DMA_CH0_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH0_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH0_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH0_STATUS_(f1_,v1) ( \
- (R_DMA_CH0_STATUS__avail__##f1_##_VAL(R_DMA_CH0_STATUS_, avail_, v1) << R_DMA_CH0_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH1_BUF
- * - type: RW
- * - addr: 0xb0000118
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH1_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH1_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH1_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH1_BUF(f1,v1) ( \
- R_DMA_CH1_BUF__WRITE(R_DMA_CH1_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH1_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH1_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH1_BUF(f1,v1) ( \
- (R_DMA_CH1_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_BUF(f1,v1) ( \
- (R_DMA_CH1_BUF__buf__##f1##__VAL(R_DMA_CH1_BUF_, buf_, v1) << R_DMA_CH1_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_BUF_(f1_,v1) ( \
- (R_DMA_CH1_BUF__buf__##f1_##_VAL(R_DMA_CH1_BUF_, buf_, v1) << R_DMA_CH1_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH1_CLR_INTR
- * - type: WO
- * - addr: 0xb00001d5
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH1_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH1_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH1_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH1_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH1_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH1_CLR_INTR_) \
- REG_VAL__R_DMA_CH1_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH1_CLR_INTR__WRITE(R_DMA_CH1_CLR_INTR__ADDR, *R_DMA_CH1_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH1_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH1_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH1_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH1_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH1_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH1_CLR_INTR_) \
- REG_VAL__R_DMA_CH1_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH1_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH1_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH1_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH1_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH1_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH1_CLR_INTR_, clr_eop_, v1) << R_DMA_CH1_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH1_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH1_CLR_INTR_, clr_descr_, v2) << R_DMA_CH1_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH1_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH1_CLR_INTR_, clr_eop_, v1) << R_DMA_CH1_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH1_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH1_CLR_INTR_, clr_descr_, v2) << R_DMA_CH1_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH1_CMD
- * - type: RW
- * - addr: 0xb00001d4
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH1_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH1_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH1_CMD(f1,v1) ( \
- R_DMA_CH1_CMD__WRITE(R_DMA_CH1_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH1_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH1_CMD(f1,v1) ( \
- (R_DMA_CH1_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_CMD(f1,v1) ( \
- (R_DMA_CH1_CMD__cmd__##f1##__VAL(R_DMA_CH1_CMD_, cmd_, v1) << R_DMA_CH1_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_CMD_(f1_,v1) ( \
- (R_DMA_CH1_CMD__cmd__##f1_##_VAL(R_DMA_CH1_CMD_, cmd_, v1) << R_DMA_CH1_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH1_DESCR
- * - type: RW
- * - addr: 0xb000011c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH1_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH1_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH1_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH1_DESCR(f1,v1) ( \
- R_DMA_CH1_DESCR__WRITE(R_DMA_CH1_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH1_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH1_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH1_DESCR(f1,v1) ( \
- (R_DMA_CH1_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_DESCR(f1,v1) ( \
- (R_DMA_CH1_DESCR__descr__##f1##__VAL(R_DMA_CH1_DESCR_, descr_, v1) << R_DMA_CH1_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_DESCR_(f1_,v1) ( \
- (R_DMA_CH1_DESCR__descr__##f1_##_VAL(R_DMA_CH1_DESCR_, descr_, v1) << R_DMA_CH1_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH1_FIRST
- * - type: RW
- * - addr: 0xb00001a4
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH1_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH1_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH1_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH1_FIRST(f1,v1) ( \
- R_DMA_CH1_FIRST__WRITE(R_DMA_CH1_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH1_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH1_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH1_FIRST(f1,v1) ( \
- (R_DMA_CH1_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_FIRST(f1,v1) ( \
- (R_DMA_CH1_FIRST__first__##f1##__VAL(R_DMA_CH1_FIRST_, first_, v1) << R_DMA_CH1_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_FIRST_(f1_,v1) ( \
- (R_DMA_CH1_FIRST__first__##f1_##_VAL(R_DMA_CH1_FIRST_, first_, v1) << R_DMA_CH1_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH1_HWSW
- * - type: RW
- * - addr: 0xb0000110
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH1_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH1_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH1_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH1_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH1_HWSW__WRITE(R_DMA_CH1_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH1_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH1_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH1_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH1_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH1_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH1_HWSW__hw__##f1##__VAL(R_DMA_CH1_HWSW_, hw_, v1) << R_DMA_CH1_HWSW__hw__BITNR) | \
- (R_DMA_CH1_HWSW__sw__##f2##__VAL(R_DMA_CH1_HWSW_, sw_, v2) << R_DMA_CH1_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH1_HWSW__hw__##f1_##_VAL(R_DMA_CH1_HWSW_, hw_, v1) << R_DMA_CH1_HWSW__hw__BITNR) | \
- (R_DMA_CH1_HWSW__sw__##f2_##_VAL(R_DMA_CH1_HWSW_, sw_, v2) << R_DMA_CH1_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH1_NEXT
- * - type: RW
- * - addr: 0xb0000114
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH1_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH1_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH1_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH1_NEXT(f1,v1) ( \
- R_DMA_CH1_NEXT__WRITE(R_DMA_CH1_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH1_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH1_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH1_NEXT(f1,v1) ( \
- (R_DMA_CH1_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_NEXT(f1,v1) ( \
- (R_DMA_CH1_NEXT__next__##f1##__VAL(R_DMA_CH1_NEXT_, next_, v1) << R_DMA_CH1_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_NEXT_(f1_,v1) ( \
- (R_DMA_CH1_NEXT__next__##f1_##_VAL(R_DMA_CH1_NEXT_, next_, v1) << R_DMA_CH1_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH1_STATUS
- * - type: RO
- * - addr: 0xb00001d6
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH1_STATUS(f1,v1) ( \
- (R_DMA_CH1_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_STATUS(f1,v1) ( \
- (R_DMA_CH1_STATUS__avail__##f1##__VAL(R_DMA_CH1_STATUS_, avail_, v1) << R_DMA_CH1_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH1_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH1_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH1_STATUS_(f1_,v1) ( \
- (R_DMA_CH1_STATUS__avail__##f1_##_VAL(R_DMA_CH1_STATUS_, avail_, v1) << R_DMA_CH1_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH2_BUF
- * - type: RW
- * - addr: 0xb0000128
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH2_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH2_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH2_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH2_BUF(f1,v1) ( \
- R_DMA_CH2_BUF__WRITE(R_DMA_CH2_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH2_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH2_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH2_BUF(f1,v1) ( \
- (R_DMA_CH2_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_BUF(f1,v1) ( \
- (R_DMA_CH2_BUF__buf__##f1##__VAL(R_DMA_CH2_BUF_, buf_, v1) << R_DMA_CH2_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_BUF_(f1_,v1) ( \
- (R_DMA_CH2_BUF__buf__##f1_##_VAL(R_DMA_CH2_BUF_, buf_, v1) << R_DMA_CH2_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH2_CLR_INTR
- * - type: WO
- * - addr: 0xb00001d9
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH2_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH2_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH2_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH2_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH2_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH2_CLR_INTR_) \
- REG_VAL__R_DMA_CH2_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH2_CLR_INTR__WRITE(R_DMA_CH2_CLR_INTR__ADDR, *R_DMA_CH2_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH2_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH2_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH2_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH2_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH2_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH2_CLR_INTR_) \
- REG_VAL__R_DMA_CH2_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH2_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH2_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH2_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH2_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH2_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH2_CLR_INTR_, clr_eop_, v1) << R_DMA_CH2_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH2_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH2_CLR_INTR_, clr_descr_, v2) << R_DMA_CH2_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH2_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH2_CLR_INTR_, clr_eop_, v1) << R_DMA_CH2_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH2_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH2_CLR_INTR_, clr_descr_, v2) << R_DMA_CH2_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH2_CMD
- * - type: RW
- * - addr: 0xb00001d8
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH2_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH2_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH2_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH2_CMD(f1,v1) ( \
- R_DMA_CH2_CMD__WRITE(R_DMA_CH2_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH2_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH2_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH2_CMD(f1,v1) ( \
- (R_DMA_CH2_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_CMD(f1,v1) ( \
- (R_DMA_CH2_CMD__cmd__##f1##__VAL(R_DMA_CH2_CMD_, cmd_, v1) << R_DMA_CH2_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_CMD_(f1_,v1) ( \
- (R_DMA_CH2_CMD__cmd__##f1_##_VAL(R_DMA_CH2_CMD_, cmd_, v1) << R_DMA_CH2_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH2_DESCR
- * - type: RW
- * - addr: 0xb000012c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH2_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH2_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH2_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH2_DESCR(f1,v1) ( \
- R_DMA_CH2_DESCR__WRITE(R_DMA_CH2_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH2_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH2_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH2_DESCR(f1,v1) ( \
- (R_DMA_CH2_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_DESCR(f1,v1) ( \
- (R_DMA_CH2_DESCR__descr__##f1##__VAL(R_DMA_CH2_DESCR_, descr_, v1) << R_DMA_CH2_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_DESCR_(f1_,v1) ( \
- (R_DMA_CH2_DESCR__descr__##f1_##_VAL(R_DMA_CH2_DESCR_, descr_, v1) << R_DMA_CH2_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH2_FIRST
- * - type: RW
- * - addr: 0xb00001a8
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH2_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH2_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH2_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH2_FIRST(f1,v1) ( \
- R_DMA_CH2_FIRST__WRITE(R_DMA_CH2_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH2_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH2_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH2_FIRST(f1,v1) ( \
- (R_DMA_CH2_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_FIRST(f1,v1) ( \
- (R_DMA_CH2_FIRST__first__##f1##__VAL(R_DMA_CH2_FIRST_, first_, v1) << R_DMA_CH2_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_FIRST_(f1_,v1) ( \
- (R_DMA_CH2_FIRST__first__##f1_##_VAL(R_DMA_CH2_FIRST_, first_, v1) << R_DMA_CH2_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH2_HWSW
- * - type: RW
- * - addr: 0xb0000120
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH2_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH2_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH2_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH2_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH2_HWSW__WRITE(R_DMA_CH2_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH2_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH2_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH2_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH2_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH2_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH2_HWSW__hw__##f1##__VAL(R_DMA_CH2_HWSW_, hw_, v1) << R_DMA_CH2_HWSW__hw__BITNR) | \
- (R_DMA_CH2_HWSW__sw__##f2##__VAL(R_DMA_CH2_HWSW_, sw_, v2) << R_DMA_CH2_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH2_HWSW__hw__##f1_##_VAL(R_DMA_CH2_HWSW_, hw_, v1) << R_DMA_CH2_HWSW__hw__BITNR) | \
- (R_DMA_CH2_HWSW__sw__##f2_##_VAL(R_DMA_CH2_HWSW_, sw_, v2) << R_DMA_CH2_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH2_NEXT
- * - type: RW
- * - addr: 0xb0000124
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH2_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH2_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH2_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH2_NEXT(f1,v1) ( \
- R_DMA_CH2_NEXT__WRITE(R_DMA_CH2_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH2_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH2_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH2_NEXT(f1,v1) ( \
- (R_DMA_CH2_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_NEXT(f1,v1) ( \
- (R_DMA_CH2_NEXT__next__##f1##__VAL(R_DMA_CH2_NEXT_, next_, v1) << R_DMA_CH2_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_NEXT_(f1_,v1) ( \
- (R_DMA_CH2_NEXT__next__##f1_##_VAL(R_DMA_CH2_NEXT_, next_, v1) << R_DMA_CH2_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH2_STATUS
- * - type: RO
- * - addr: 0xb00001da
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH2_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH2_STATUS(f1,v1) ( \
- (R_DMA_CH2_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_STATUS(f1,v1) ( \
- (R_DMA_CH2_STATUS__avail__##f1##__VAL(R_DMA_CH2_STATUS_, avail_, v1) << R_DMA_CH2_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH2_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH2_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH2_STATUS_(f1_,v1) ( \
- (R_DMA_CH2_STATUS__avail__##f1_##_VAL(R_DMA_CH2_STATUS_, avail_, v1) << R_DMA_CH2_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH3_BUF
- * - type: RW
- * - addr: 0xb0000138
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH3_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH3_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH3_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH3_BUF(f1,v1) ( \
- R_DMA_CH3_BUF__WRITE(R_DMA_CH3_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH3_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH3_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH3_BUF(f1,v1) ( \
- (R_DMA_CH3_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_BUF(f1,v1) ( \
- (R_DMA_CH3_BUF__buf__##f1##__VAL(R_DMA_CH3_BUF_, buf_, v1) << R_DMA_CH3_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_BUF_(f1_,v1) ( \
- (R_DMA_CH3_BUF__buf__##f1_##_VAL(R_DMA_CH3_BUF_, buf_, v1) << R_DMA_CH3_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH3_CLR_INTR
- * - type: WO
- * - addr: 0xb00001dd
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH3_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH3_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH3_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH3_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH3_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH3_CLR_INTR_) \
- REG_VAL__R_DMA_CH3_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH3_CLR_INTR__WRITE(R_DMA_CH3_CLR_INTR__ADDR, *R_DMA_CH3_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH3_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH3_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH3_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH3_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH3_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH3_CLR_INTR_) \
- REG_VAL__R_DMA_CH3_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH3_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH3_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH3_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH3_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH3_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH3_CLR_INTR_, clr_eop_, v1) << R_DMA_CH3_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH3_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH3_CLR_INTR_, clr_descr_, v2) << R_DMA_CH3_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH3_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH3_CLR_INTR_, clr_eop_, v1) << R_DMA_CH3_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH3_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH3_CLR_INTR_, clr_descr_, v2) << R_DMA_CH3_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH3_CMD
- * - type: RW
- * - addr: 0xb00001dc
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH3_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH3_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH3_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH3_CMD(f1,v1) ( \
- R_DMA_CH3_CMD__WRITE(R_DMA_CH3_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH3_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH3_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH3_CMD(f1,v1) ( \
- (R_DMA_CH3_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_CMD(f1,v1) ( \
- (R_DMA_CH3_CMD__cmd__##f1##__VAL(R_DMA_CH3_CMD_, cmd_, v1) << R_DMA_CH3_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_CMD_(f1_,v1) ( \
- (R_DMA_CH3_CMD__cmd__##f1_##_VAL(R_DMA_CH3_CMD_, cmd_, v1) << R_DMA_CH3_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH3_DESCR
- * - type: RW
- * - addr: 0xb000013c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH3_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH3_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH3_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH3_DESCR(f1,v1) ( \
- R_DMA_CH3_DESCR__WRITE(R_DMA_CH3_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH3_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH3_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH3_DESCR(f1,v1) ( \
- (R_DMA_CH3_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_DESCR(f1,v1) ( \
- (R_DMA_CH3_DESCR__descr__##f1##__VAL(R_DMA_CH3_DESCR_, descr_, v1) << R_DMA_CH3_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_DESCR_(f1_,v1) ( \
- (R_DMA_CH3_DESCR__descr__##f1_##_VAL(R_DMA_CH3_DESCR_, descr_, v1) << R_DMA_CH3_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH3_FIRST
- * - type: RW
- * - addr: 0xb00001ac
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH3_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH3_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH3_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH3_FIRST(f1,v1) ( \
- R_DMA_CH3_FIRST__WRITE(R_DMA_CH3_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH3_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH3_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH3_FIRST(f1,v1) ( \
- (R_DMA_CH3_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_FIRST(f1,v1) ( \
- (R_DMA_CH3_FIRST__first__##f1##__VAL(R_DMA_CH3_FIRST_, first_, v1) << R_DMA_CH3_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_FIRST_(f1_,v1) ( \
- (R_DMA_CH3_FIRST__first__##f1_##_VAL(R_DMA_CH3_FIRST_, first_, v1) << R_DMA_CH3_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH3_HWSW
- * - type: RW
- * - addr: 0xb0000130
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH3_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH3_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH3_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH3_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH3_HWSW__WRITE(R_DMA_CH3_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH3_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH3_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH3_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH3_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH3_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH3_HWSW__hw__##f1##__VAL(R_DMA_CH3_HWSW_, hw_, v1) << R_DMA_CH3_HWSW__hw__BITNR) | \
- (R_DMA_CH3_HWSW__sw__##f2##__VAL(R_DMA_CH3_HWSW_, sw_, v2) << R_DMA_CH3_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH3_HWSW__hw__##f1_##_VAL(R_DMA_CH3_HWSW_, hw_, v1) << R_DMA_CH3_HWSW__hw__BITNR) | \
- (R_DMA_CH3_HWSW__sw__##f2_##_VAL(R_DMA_CH3_HWSW_, sw_, v2) << R_DMA_CH3_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH3_NEXT
- * - type: RW
- * - addr: 0xb0000134
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH3_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH3_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH3_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH3_NEXT(f1,v1) ( \
- R_DMA_CH3_NEXT__WRITE(R_DMA_CH3_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH3_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH3_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH3_NEXT(f1,v1) ( \
- (R_DMA_CH3_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_NEXT(f1,v1) ( \
- (R_DMA_CH3_NEXT__next__##f1##__VAL(R_DMA_CH3_NEXT_, next_, v1) << R_DMA_CH3_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_NEXT_(f1_,v1) ( \
- (R_DMA_CH3_NEXT__next__##f1_##_VAL(R_DMA_CH3_NEXT_, next_, v1) << R_DMA_CH3_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH3_STATUS
- * - type: RO
- * - addr: 0xb00001de
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH3_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH3_STATUS(f1,v1) ( \
- (R_DMA_CH3_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_STATUS(f1,v1) ( \
- (R_DMA_CH3_STATUS__avail__##f1##__VAL(R_DMA_CH3_STATUS_, avail_, v1) << R_DMA_CH3_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH3_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH3_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH3_STATUS_(f1_,v1) ( \
- (R_DMA_CH3_STATUS__avail__##f1_##_VAL(R_DMA_CH3_STATUS_, avail_, v1) << R_DMA_CH3_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH4_BUF
- * - type: RW
- * - addr: 0xb0000148
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH4_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH4_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH4_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH4_BUF(f1,v1) ( \
- R_DMA_CH4_BUF__WRITE(R_DMA_CH4_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH4_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH4_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH4_BUF(f1,v1) ( \
- (R_DMA_CH4_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_BUF(f1,v1) ( \
- (R_DMA_CH4_BUF__buf__##f1##__VAL(R_DMA_CH4_BUF_, buf_, v1) << R_DMA_CH4_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_BUF_(f1_,v1) ( \
- (R_DMA_CH4_BUF__buf__##f1_##_VAL(R_DMA_CH4_BUF_, buf_, v1) << R_DMA_CH4_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH4_CLR_INTR
- * - type: WO
- * - addr: 0xb00001e1
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH4_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH4_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH4_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH4_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH4_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH4_CLR_INTR_) \
- REG_VAL__R_DMA_CH4_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH4_CLR_INTR__WRITE(R_DMA_CH4_CLR_INTR__ADDR, *R_DMA_CH4_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH4_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH4_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH4_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH4_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH4_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH4_CLR_INTR_) \
- REG_VAL__R_DMA_CH4_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH4_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH4_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH4_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH4_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH4_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH4_CLR_INTR_, clr_eop_, v1) << R_DMA_CH4_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH4_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH4_CLR_INTR_, clr_descr_, v2) << R_DMA_CH4_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH4_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH4_CLR_INTR_, clr_eop_, v1) << R_DMA_CH4_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH4_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH4_CLR_INTR_, clr_descr_, v2) << R_DMA_CH4_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH4_CMD
- * - type: RW
- * - addr: 0xb00001e0
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH4_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH4_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH4_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH4_CMD(f1,v1) ( \
- R_DMA_CH4_CMD__WRITE(R_DMA_CH4_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH4_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH4_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH4_CMD(f1,v1) ( \
- (R_DMA_CH4_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_CMD(f1,v1) ( \
- (R_DMA_CH4_CMD__cmd__##f1##__VAL(R_DMA_CH4_CMD_, cmd_, v1) << R_DMA_CH4_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_CMD_(f1_,v1) ( \
- (R_DMA_CH4_CMD__cmd__##f1_##_VAL(R_DMA_CH4_CMD_, cmd_, v1) << R_DMA_CH4_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH4_DESCR
- * - type: RW
- * - addr: 0xb000014c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH4_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH4_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH4_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH4_DESCR(f1,v1) ( \
- R_DMA_CH4_DESCR__WRITE(R_DMA_CH4_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH4_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH4_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH4_DESCR(f1,v1) ( \
- (R_DMA_CH4_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_DESCR(f1,v1) ( \
- (R_DMA_CH4_DESCR__descr__##f1##__VAL(R_DMA_CH4_DESCR_, descr_, v1) << R_DMA_CH4_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_DESCR_(f1_,v1) ( \
- (R_DMA_CH4_DESCR__descr__##f1_##_VAL(R_DMA_CH4_DESCR_, descr_, v1) << R_DMA_CH4_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH4_FIRST
- * - type: RW
- * - addr: 0xb00001b0
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH4_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH4_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH4_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH4_FIRST(f1,v1) ( \
- R_DMA_CH4_FIRST__WRITE(R_DMA_CH4_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH4_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH4_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH4_FIRST(f1,v1) ( \
- (R_DMA_CH4_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_FIRST(f1,v1) ( \
- (R_DMA_CH4_FIRST__first__##f1##__VAL(R_DMA_CH4_FIRST_, first_, v1) << R_DMA_CH4_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_FIRST_(f1_,v1) ( \
- (R_DMA_CH4_FIRST__first__##f1_##_VAL(R_DMA_CH4_FIRST_, first_, v1) << R_DMA_CH4_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH4_HWSW
- * - type: RW
- * - addr: 0xb0000140
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH4_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH4_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH4_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH4_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH4_HWSW__WRITE(R_DMA_CH4_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH4_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH4_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH4_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH4_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH4_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH4_HWSW__hw__##f1##__VAL(R_DMA_CH4_HWSW_, hw_, v1) << R_DMA_CH4_HWSW__hw__BITNR) | \
- (R_DMA_CH4_HWSW__sw__##f2##__VAL(R_DMA_CH4_HWSW_, sw_, v2) << R_DMA_CH4_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH4_HWSW__hw__##f1_##_VAL(R_DMA_CH4_HWSW_, hw_, v1) << R_DMA_CH4_HWSW__hw__BITNR) | \
- (R_DMA_CH4_HWSW__sw__##f2_##_VAL(R_DMA_CH4_HWSW_, sw_, v2) << R_DMA_CH4_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH4_NEXT
- * - type: RW
- * - addr: 0xb0000144
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH4_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH4_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH4_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH4_NEXT(f1,v1) ( \
- R_DMA_CH4_NEXT__WRITE(R_DMA_CH4_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH4_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH4_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH4_NEXT(f1,v1) ( \
- (R_DMA_CH4_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_NEXT(f1,v1) ( \
- (R_DMA_CH4_NEXT__next__##f1##__VAL(R_DMA_CH4_NEXT_, next_, v1) << R_DMA_CH4_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_NEXT_(f1_,v1) ( \
- (R_DMA_CH4_NEXT__next__##f1_##_VAL(R_DMA_CH4_NEXT_, next_, v1) << R_DMA_CH4_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH4_STATUS
- * - type: RO
- * - addr: 0xb00001e2
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH4_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH4_STATUS(f1,v1) ( \
- (R_DMA_CH4_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_STATUS(f1,v1) ( \
- (R_DMA_CH4_STATUS__avail__##f1##__VAL(R_DMA_CH4_STATUS_, avail_, v1) << R_DMA_CH4_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH4_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH4_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH4_STATUS_(f1_,v1) ( \
- (R_DMA_CH4_STATUS__avail__##f1_##_VAL(R_DMA_CH4_STATUS_, avail_, v1) << R_DMA_CH4_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH5_BUF
- * - type: RW
- * - addr: 0xb0000158
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH5_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH5_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH5_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH5_BUF(f1,v1) ( \
- R_DMA_CH5_BUF__WRITE(R_DMA_CH5_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH5_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH5_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH5_BUF(f1,v1) ( \
- (R_DMA_CH5_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_BUF(f1,v1) ( \
- (R_DMA_CH5_BUF__buf__##f1##__VAL(R_DMA_CH5_BUF_, buf_, v1) << R_DMA_CH5_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_BUF_(f1_,v1) ( \
- (R_DMA_CH5_BUF__buf__##f1_##_VAL(R_DMA_CH5_BUF_, buf_, v1) << R_DMA_CH5_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH5_CLR_INTR
- * - type: WO
- * - addr: 0xb00001e5
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH5_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH5_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH5_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH5_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH5_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH5_CLR_INTR_) \
- REG_VAL__R_DMA_CH5_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH5_CLR_INTR__WRITE(R_DMA_CH5_CLR_INTR__ADDR, *R_DMA_CH5_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH5_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH5_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH5_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH5_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH5_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH5_CLR_INTR_) \
- REG_VAL__R_DMA_CH5_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH5_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH5_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH5_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH5_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH5_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH5_CLR_INTR_, clr_eop_, v1) << R_DMA_CH5_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH5_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH5_CLR_INTR_, clr_descr_, v2) << R_DMA_CH5_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH5_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH5_CLR_INTR_, clr_eop_, v1) << R_DMA_CH5_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH5_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH5_CLR_INTR_, clr_descr_, v2) << R_DMA_CH5_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH5_CMD
- * - type: RW
- * - addr: 0xb00001e4
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH5_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH5_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH5_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH5_CMD(f1,v1) ( \
- R_DMA_CH5_CMD__WRITE(R_DMA_CH5_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH5_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH5_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH5_CMD(f1,v1) ( \
- (R_DMA_CH5_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_CMD(f1,v1) ( \
- (R_DMA_CH5_CMD__cmd__##f1##__VAL(R_DMA_CH5_CMD_, cmd_, v1) << R_DMA_CH5_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_CMD_(f1_,v1) ( \
- (R_DMA_CH5_CMD__cmd__##f1_##_VAL(R_DMA_CH5_CMD_, cmd_, v1) << R_DMA_CH5_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH5_DESCR
- * - type: RW
- * - addr: 0xb000015c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH5_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH5_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH5_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH5_DESCR(f1,v1) ( \
- R_DMA_CH5_DESCR__WRITE(R_DMA_CH5_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH5_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH5_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH5_DESCR(f1,v1) ( \
- (R_DMA_CH5_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_DESCR(f1,v1) ( \
- (R_DMA_CH5_DESCR__descr__##f1##__VAL(R_DMA_CH5_DESCR_, descr_, v1) << R_DMA_CH5_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_DESCR_(f1_,v1) ( \
- (R_DMA_CH5_DESCR__descr__##f1_##_VAL(R_DMA_CH5_DESCR_, descr_, v1) << R_DMA_CH5_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH5_FIRST
- * - type: RW
- * - addr: 0xb00001b4
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH5_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH5_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH5_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH5_FIRST(f1,v1) ( \
- R_DMA_CH5_FIRST__WRITE(R_DMA_CH5_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH5_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH5_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH5_FIRST(f1,v1) ( \
- (R_DMA_CH5_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_FIRST(f1,v1) ( \
- (R_DMA_CH5_FIRST__first__##f1##__VAL(R_DMA_CH5_FIRST_, first_, v1) << R_DMA_CH5_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_FIRST_(f1_,v1) ( \
- (R_DMA_CH5_FIRST__first__##f1_##_VAL(R_DMA_CH5_FIRST_, first_, v1) << R_DMA_CH5_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH5_HWSW
- * - type: RW
- * - addr: 0xb0000150
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH5_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH5_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH5_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH5_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH5_HWSW__WRITE(R_DMA_CH5_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH5_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH5_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH5_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH5_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH5_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH5_HWSW__hw__##f1##__VAL(R_DMA_CH5_HWSW_, hw_, v1) << R_DMA_CH5_HWSW__hw__BITNR) | \
- (R_DMA_CH5_HWSW__sw__##f2##__VAL(R_DMA_CH5_HWSW_, sw_, v2) << R_DMA_CH5_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH5_HWSW__hw__##f1_##_VAL(R_DMA_CH5_HWSW_, hw_, v1) << R_DMA_CH5_HWSW__hw__BITNR) | \
- (R_DMA_CH5_HWSW__sw__##f2_##_VAL(R_DMA_CH5_HWSW_, sw_, v2) << R_DMA_CH5_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH5_NEXT
- * - type: RW
- * - addr: 0xb0000154
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH5_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH5_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH5_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH5_NEXT(f1,v1) ( \
- R_DMA_CH5_NEXT__WRITE(R_DMA_CH5_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH5_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH5_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH5_NEXT(f1,v1) ( \
- (R_DMA_CH5_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_NEXT(f1,v1) ( \
- (R_DMA_CH5_NEXT__next__##f1##__VAL(R_DMA_CH5_NEXT_, next_, v1) << R_DMA_CH5_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_NEXT_(f1_,v1) ( \
- (R_DMA_CH5_NEXT__next__##f1_##_VAL(R_DMA_CH5_NEXT_, next_, v1) << R_DMA_CH5_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH5_STATUS
- * - type: RO
- * - addr: 0xb00001e6
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH5_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH5_STATUS(f1,v1) ( \
- (R_DMA_CH5_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_STATUS(f1,v1) ( \
- (R_DMA_CH5_STATUS__avail__##f1##__VAL(R_DMA_CH5_STATUS_, avail_, v1) << R_DMA_CH5_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH5_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH5_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH5_STATUS_(f1_,v1) ( \
- (R_DMA_CH5_STATUS__avail__##f1_##_VAL(R_DMA_CH5_STATUS_, avail_, v1) << R_DMA_CH5_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH6_BUF
- * - type: RW
- * - addr: 0xb0000168
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH6_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH6_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH6_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH6_BUF(f1,v1) ( \
- R_DMA_CH6_BUF__WRITE(R_DMA_CH6_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH6_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH6_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH6_BUF(f1,v1) ( \
- (R_DMA_CH6_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_BUF(f1,v1) ( \
- (R_DMA_CH6_BUF__buf__##f1##__VAL(R_DMA_CH6_BUF_, buf_, v1) << R_DMA_CH6_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_BUF_(f1_,v1) ( \
- (R_DMA_CH6_BUF__buf__##f1_##_VAL(R_DMA_CH6_BUF_, buf_, v1) << R_DMA_CH6_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH6_CLR_INTR
- * - type: WO
- * - addr: 0xb00001e9
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH6_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH6_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH6_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH6_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH6_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH6_CLR_INTR_) \
- REG_VAL__R_DMA_CH6_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH6_CLR_INTR__WRITE(R_DMA_CH6_CLR_INTR__ADDR, *R_DMA_CH6_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH6_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH6_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH6_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH6_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH6_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH6_CLR_INTR_) \
- REG_VAL__R_DMA_CH6_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH6_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH6_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH6_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH6_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH6_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH6_CLR_INTR_, clr_eop_, v1) << R_DMA_CH6_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH6_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH6_CLR_INTR_, clr_descr_, v2) << R_DMA_CH6_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH6_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH6_CLR_INTR_, clr_eop_, v1) << R_DMA_CH6_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH6_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH6_CLR_INTR_, clr_descr_, v2) << R_DMA_CH6_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH6_CMD
- * - type: RW
- * - addr: 0xb00001e8
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH6_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH6_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH6_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH6_CMD(f1,v1) ( \
- R_DMA_CH6_CMD__WRITE(R_DMA_CH6_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH6_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH6_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH6_CMD(f1,v1) ( \
- (R_DMA_CH6_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_CMD(f1,v1) ( \
- (R_DMA_CH6_CMD__cmd__##f1##__VAL(R_DMA_CH6_CMD_, cmd_, v1) << R_DMA_CH6_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_CMD_(f1_,v1) ( \
- (R_DMA_CH6_CMD__cmd__##f1_##_VAL(R_DMA_CH6_CMD_, cmd_, v1) << R_DMA_CH6_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH6_DESCR
- * - type: RW
- * - addr: 0xb000016c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH6_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH6_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH6_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH6_DESCR(f1,v1) ( \
- R_DMA_CH6_DESCR__WRITE(R_DMA_CH6_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH6_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH6_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH6_DESCR(f1,v1) ( \
- (R_DMA_CH6_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_DESCR(f1,v1) ( \
- (R_DMA_CH6_DESCR__descr__##f1##__VAL(R_DMA_CH6_DESCR_, descr_, v1) << R_DMA_CH6_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_DESCR_(f1_,v1) ( \
- (R_DMA_CH6_DESCR__descr__##f1_##_VAL(R_DMA_CH6_DESCR_, descr_, v1) << R_DMA_CH6_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH6_FIRST
- * - type: RW
- * - addr: 0xb00001b8
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH6_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH6_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH6_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH6_FIRST(f1,v1) ( \
- R_DMA_CH6_FIRST__WRITE(R_DMA_CH6_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH6_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH6_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH6_FIRST(f1,v1) ( \
- (R_DMA_CH6_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_FIRST(f1,v1) ( \
- (R_DMA_CH6_FIRST__first__##f1##__VAL(R_DMA_CH6_FIRST_, first_, v1) << R_DMA_CH6_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_FIRST_(f1_,v1) ( \
- (R_DMA_CH6_FIRST__first__##f1_##_VAL(R_DMA_CH6_FIRST_, first_, v1) << R_DMA_CH6_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH6_HWSW
- * - type: RW
- * - addr: 0xb0000160
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH6_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH6_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH6_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH6_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH6_HWSW__WRITE(R_DMA_CH6_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH6_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH6_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH6_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH6_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH6_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH6_HWSW__hw__##f1##__VAL(R_DMA_CH6_HWSW_, hw_, v1) << R_DMA_CH6_HWSW__hw__BITNR) | \
- (R_DMA_CH6_HWSW__sw__##f2##__VAL(R_DMA_CH6_HWSW_, sw_, v2) << R_DMA_CH6_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH6_HWSW__hw__##f1_##_VAL(R_DMA_CH6_HWSW_, hw_, v1) << R_DMA_CH6_HWSW__hw__BITNR) | \
- (R_DMA_CH6_HWSW__sw__##f2_##_VAL(R_DMA_CH6_HWSW_, sw_, v2) << R_DMA_CH6_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH6_NEXT
- * - type: RW
- * - addr: 0xb0000164
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH6_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH6_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH6_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH6_NEXT(f1,v1) ( \
- R_DMA_CH6_NEXT__WRITE(R_DMA_CH6_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH6_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH6_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH6_NEXT(f1,v1) ( \
- (R_DMA_CH6_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_NEXT(f1,v1) ( \
- (R_DMA_CH6_NEXT__next__##f1##__VAL(R_DMA_CH6_NEXT_, next_, v1) << R_DMA_CH6_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_NEXT_(f1_,v1) ( \
- (R_DMA_CH6_NEXT__next__##f1_##_VAL(R_DMA_CH6_NEXT_, next_, v1) << R_DMA_CH6_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH6_STATUS
- * - type: RO
- * - addr: 0xb00001ea
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH6_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH6_STATUS(f1,v1) ( \
- (R_DMA_CH6_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_STATUS(f1,v1) ( \
- (R_DMA_CH6_STATUS__avail__##f1##__VAL(R_DMA_CH6_STATUS_, avail_, v1) << R_DMA_CH6_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH6_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH6_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH6_STATUS_(f1_,v1) ( \
- (R_DMA_CH6_STATUS__avail__##f1_##_VAL(R_DMA_CH6_STATUS_, avail_, v1) << R_DMA_CH6_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH7_BUF
- * - type: RW
- * - addr: 0xb0000178
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH7_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH7_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH7_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH7_BUF(f1,v1) ( \
- R_DMA_CH7_BUF__WRITE(R_DMA_CH7_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH7_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH7_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH7_BUF(f1,v1) ( \
- (R_DMA_CH7_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_BUF(f1,v1) ( \
- (R_DMA_CH7_BUF__buf__##f1##__VAL(R_DMA_CH7_BUF_, buf_, v1) << R_DMA_CH7_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_BUF_(f1_,v1) ( \
- (R_DMA_CH7_BUF__buf__##f1_##_VAL(R_DMA_CH7_BUF_, buf_, v1) << R_DMA_CH7_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH7_CLR_INTR
- * - type: WO
- * - addr: 0xb00001ed
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH7_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH7_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH7_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH7_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH7_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH7_CLR_INTR_) \
- REG_VAL__R_DMA_CH7_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH7_CLR_INTR__WRITE(R_DMA_CH7_CLR_INTR__ADDR, *R_DMA_CH7_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH7_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH7_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH7_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH7_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH7_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH7_CLR_INTR_) \
- REG_VAL__R_DMA_CH7_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH7_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH7_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH7_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH7_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH7_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH7_CLR_INTR_, clr_eop_, v1) << R_DMA_CH7_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH7_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH7_CLR_INTR_, clr_descr_, v2) << R_DMA_CH7_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH7_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH7_CLR_INTR_, clr_eop_, v1) << R_DMA_CH7_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH7_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH7_CLR_INTR_, clr_descr_, v2) << R_DMA_CH7_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH7_CMD
- * - type: RW
- * - addr: 0xb00001ec
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH7_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH7_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH7_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH7_CMD(f1,v1) ( \
- R_DMA_CH7_CMD__WRITE(R_DMA_CH7_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH7_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH7_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH7_CMD(f1,v1) ( \
- (R_DMA_CH7_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_CMD(f1,v1) ( \
- (R_DMA_CH7_CMD__cmd__##f1##__VAL(R_DMA_CH7_CMD_, cmd_, v1) << R_DMA_CH7_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_CMD_(f1_,v1) ( \
- (R_DMA_CH7_CMD__cmd__##f1_##_VAL(R_DMA_CH7_CMD_, cmd_, v1) << R_DMA_CH7_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH7_DESCR
- * - type: RW
- * - addr: 0xb000017c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH7_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH7_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH7_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH7_DESCR(f1,v1) ( \
- R_DMA_CH7_DESCR__WRITE(R_DMA_CH7_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH7_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH7_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH7_DESCR(f1,v1) ( \
- (R_DMA_CH7_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_DESCR(f1,v1) ( \
- (R_DMA_CH7_DESCR__descr__##f1##__VAL(R_DMA_CH7_DESCR_, descr_, v1) << R_DMA_CH7_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_DESCR_(f1_,v1) ( \
- (R_DMA_CH7_DESCR__descr__##f1_##_VAL(R_DMA_CH7_DESCR_, descr_, v1) << R_DMA_CH7_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH7_FIRST
- * - type: RW
- * - addr: 0xb00001bc
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH7_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH7_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH7_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH7_FIRST(f1,v1) ( \
- R_DMA_CH7_FIRST__WRITE(R_DMA_CH7_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH7_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH7_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH7_FIRST(f1,v1) ( \
- (R_DMA_CH7_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_FIRST(f1,v1) ( \
- (R_DMA_CH7_FIRST__first__##f1##__VAL(R_DMA_CH7_FIRST_, first_, v1) << R_DMA_CH7_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_FIRST_(f1_,v1) ( \
- (R_DMA_CH7_FIRST__first__##f1_##_VAL(R_DMA_CH7_FIRST_, first_, v1) << R_DMA_CH7_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH7_HWSW
- * - type: RW
- * - addr: 0xb0000170
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH7_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH7_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH7_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH7_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH7_HWSW__WRITE(R_DMA_CH7_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH7_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH7_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH7_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH7_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH7_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH7_HWSW__hw__##f1##__VAL(R_DMA_CH7_HWSW_, hw_, v1) << R_DMA_CH7_HWSW__hw__BITNR) | \
- (R_DMA_CH7_HWSW__sw__##f2##__VAL(R_DMA_CH7_HWSW_, sw_, v2) << R_DMA_CH7_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH7_HWSW__hw__##f1_##_VAL(R_DMA_CH7_HWSW_, hw_, v1) << R_DMA_CH7_HWSW__hw__BITNR) | \
- (R_DMA_CH7_HWSW__sw__##f2_##_VAL(R_DMA_CH7_HWSW_, sw_, v2) << R_DMA_CH7_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH7_NEXT
- * - type: RW
- * - addr: 0xb0000174
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH7_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH7_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH7_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH7_NEXT(f1,v1) ( \
- R_DMA_CH7_NEXT__WRITE(R_DMA_CH7_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH7_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH7_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH7_NEXT(f1,v1) ( \
- (R_DMA_CH7_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_NEXT(f1,v1) ( \
- (R_DMA_CH7_NEXT__next__##f1##__VAL(R_DMA_CH7_NEXT_, next_, v1) << R_DMA_CH7_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_NEXT_(f1_,v1) ( \
- (R_DMA_CH7_NEXT__next__##f1_##_VAL(R_DMA_CH7_NEXT_, next_, v1) << R_DMA_CH7_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH7_STATUS
- * - type: RO
- * - addr: 0xb00001ee
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH7_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH7_STATUS(f1,v1) ( \
- (R_DMA_CH7_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_STATUS(f1,v1) ( \
- (R_DMA_CH7_STATUS__avail__##f1##__VAL(R_DMA_CH7_STATUS_, avail_, v1) << R_DMA_CH7_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH7_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH7_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH7_STATUS_(f1_,v1) ( \
- (R_DMA_CH7_STATUS__avail__##f1_##_VAL(R_DMA_CH7_STATUS_, avail_, v1) << R_DMA_CH7_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_BUF
- * - type: RW
- * - addr: 0xb0000188
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_BUF(f1,v1) ( \
- R_DMA_CH8_BUF__WRITE(R_DMA_CH8_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH8_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_BUF(f1,v1) ( \
- (R_DMA_CH8_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_BUF(f1,v1) ( \
- (R_DMA_CH8_BUF__buf__##f1##__VAL(R_DMA_CH8_BUF_, buf_, v1) << R_DMA_CH8_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_BUF_(f1_,v1) ( \
- (R_DMA_CH8_BUF__buf__##f1_##_VAL(R_DMA_CH8_BUF_, buf_, v1) << R_DMA_CH8_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_CLR_INTR
- * - type: WO
- * - addr: 0xb00001f1
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH8_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH8_CLR_INTR__WRITE(R_DMA_CH8_CLR_INTR__ADDR, *R_DMA_CH8_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH8_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH8_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH8_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH8_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH8_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH8_CLR_INTR_, clr_eop_, v1) << R_DMA_CH8_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH8_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH8_CLR_INTR_, clr_descr_, v2) << R_DMA_CH8_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH8_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH8_CLR_INTR_, clr_eop_, v1) << R_DMA_CH8_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH8_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH8_CLR_INTR_, clr_descr_, v2) << R_DMA_CH8_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_CMD
- * - type: RW
- * - addr: 0xb00001f0
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_CMD(f1,v1) ( \
- R_DMA_CH8_CMD__WRITE(R_DMA_CH8_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH8_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_CMD(f1,v1) ( \
- (R_DMA_CH8_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_CMD(f1,v1) ( \
- (R_DMA_CH8_CMD__cmd__##f1##__VAL(R_DMA_CH8_CMD_, cmd_, v1) << R_DMA_CH8_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_CMD_(f1_,v1) ( \
- (R_DMA_CH8_CMD__cmd__##f1_##_VAL(R_DMA_CH8_CMD_, cmd_, v1) << R_DMA_CH8_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_DESCR
- * - type: RW
- * - addr: 0xb000018c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_DESCR(f1,v1) ( \
- R_DMA_CH8_DESCR__WRITE(R_DMA_CH8_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH8_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_DESCR(f1,v1) ( \
- (R_DMA_CH8_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_DESCR(f1,v1) ( \
- (R_DMA_CH8_DESCR__descr__##f1##__VAL(R_DMA_CH8_DESCR_, descr_, v1) << R_DMA_CH8_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_DESCR_(f1_,v1) ( \
- (R_DMA_CH8_DESCR__descr__##f1_##_VAL(R_DMA_CH8_DESCR_, descr_, v1) << R_DMA_CH8_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_FIRST
- * - type: RW
- * - addr: 0xb00001c0
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_FIRST(f1,v1) ( \
- R_DMA_CH8_FIRST__WRITE(R_DMA_CH8_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH8_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_FIRST(f1,v1) ( \
- (R_DMA_CH8_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_FIRST(f1,v1) ( \
- (R_DMA_CH8_FIRST__first__##f1##__VAL(R_DMA_CH8_FIRST_, first_, v1) << R_DMA_CH8_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_FIRST_(f1_,v1) ( \
- (R_DMA_CH8_FIRST__first__##f1_##_VAL(R_DMA_CH8_FIRST_, first_, v1) << R_DMA_CH8_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_HWSW
- * - type: RW
- * - addr: 0xb0000180
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH8_HWSW__WRITE(R_DMA_CH8_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH8_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH8_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH8_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH8_HWSW__hw__##f1##__VAL(R_DMA_CH8_HWSW_, hw_, v1) << R_DMA_CH8_HWSW__hw__BITNR) | \
- (R_DMA_CH8_HWSW__sw__##f2##__VAL(R_DMA_CH8_HWSW_, sw_, v2) << R_DMA_CH8_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH8_HWSW__hw__##f1_##_VAL(R_DMA_CH8_HWSW_, hw_, v1) << R_DMA_CH8_HWSW__hw__BITNR) | \
- (R_DMA_CH8_HWSW__sw__##f2_##_VAL(R_DMA_CH8_HWSW_, sw_, v2) << R_DMA_CH8_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_NEP
- * - type: RW
- * - addr: 0xb00001c0
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_NEP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_NEP.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_NEP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_NEP(f1,v1) ( \
- R_DMA_CH8_NEP__WRITE(R_DMA_CH8_NEP__ADDR, ( \
- REG_VAL__R_DMA_CH8_NEP_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_NEP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_NEP(f1,v1) ( \
- (R_DMA_CH8_NEP__nep__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_NEP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_NEP.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_NEP(f1,v1) ( \
- (R_DMA_CH8_NEP__nep__##f1##__VAL(R_DMA_CH8_NEP_, nep_, v1) << R_DMA_CH8_NEP__nep__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_NEP_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_NEP.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_NEP_(f1_,v1) ( \
- (R_DMA_CH8_NEP__nep__##f1_##_VAL(R_DMA_CH8_NEP_, nep_, v1) << R_DMA_CH8_NEP__nep__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_NEXT
- * - type: RW
- * - addr: 0xb0000184
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_NEXT(f1,v1) ( \
- R_DMA_CH8_NEXT__WRITE(R_DMA_CH8_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH8_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_NEXT(f1,v1) ( \
- (R_DMA_CH8_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_NEXT(f1,v1) ( \
- (R_DMA_CH8_NEXT__next__##f1##__VAL(R_DMA_CH8_NEXT_, next_, v1) << R_DMA_CH8_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_NEXT_(f1_,v1) ( \
- (R_DMA_CH8_NEXT__next__##f1_##_VAL(R_DMA_CH8_NEXT_, next_, v1) << R_DMA_CH8_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_STATUS
- * - type: RO
- * - addr: 0xb00001f2
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_STATUS(f1,v1) ( \
- (R_DMA_CH8_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_STATUS(f1,v1) ( \
- (R_DMA_CH8_STATUS__avail__##f1##__VAL(R_DMA_CH8_STATUS_, avail_, v1) << R_DMA_CH8_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_STATUS_(f1_,v1) ( \
- (R_DMA_CH8_STATUS__avail__##f1_##_VAL(R_DMA_CH8_STATUS_, avail_, v1) << R_DMA_CH8_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB
- * - type: RW
- * - addr: 0xb000018c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB(f1,v1) ( \
- R_DMA_CH8_SUB__WRITE(R_DMA_CH8_SUB__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB(f1,v1) ( \
- (R_DMA_CH8_SUB__sub__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB(f1,v1) ( \
- (R_DMA_CH8_SUB__sub__##f1##__VAL(R_DMA_CH8_SUB_, sub_, v1) << R_DMA_CH8_SUB__sub__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB_(f1_,v1) ( \
- (R_DMA_CH8_SUB__sub__##f1_##_VAL(R_DMA_CH8_SUB_, sub_, v1) << R_DMA_CH8_SUB__sub__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB0_CLR_INTR
- * - type: WO
- * - addr: 0xb00001e3
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB0_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB0_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB0_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB0_CLR_INTR(f1,v1) ( \
- *R_DMA_CH8_SUB0_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_SUB0_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_SUB0_CLR_INTR_(f1##_,v1) \
- ), \
- R_DMA_CH8_SUB0_CLR_INTR__WRITE(R_DMA_CH8_SUB0_CLR_INTR__ADDR, *R_DMA_CH8_SUB0_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB0_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB0_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH8_SUB0_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB0_CLR_INTR__SHADOW(f1,v1) ( \
- *R_DMA_CH8_SUB0_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_SUB0_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_SUB0_CLR_INTR_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB0_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB0_CLR_INTR(f1,v1) ( \
- (R_DMA_CH8_SUB0_CLR_INTR__clr_descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB0_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB0_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB0_CLR_INTR(f1,v1) ( \
- (R_DMA_CH8_SUB0_CLR_INTR__clr_descr__##f1##__VAL(R_DMA_CH8_SUB0_CLR_INTR_, clr_descr_, v1) << R_DMA_CH8_SUB0_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB0_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB0_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB0_CLR_INTR_(f1_,v1) ( \
- (R_DMA_CH8_SUB0_CLR_INTR__clr_descr__##f1_##_VAL(R_DMA_CH8_SUB0_CLR_INTR_, clr_descr_, v1) << R_DMA_CH8_SUB0_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB0_CMD
- * - type: RW
- * - addr: 0xb00001d3
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB0_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB0_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB0_CMD(f1,v1) ( \
- R_DMA_CH8_SUB0_CMD__WRITE(R_DMA_CH8_SUB0_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB0_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB0_CMD(f1,v1) ( \
- (R_DMA_CH8_SUB0_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB0_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB0_CMD(f1,v1) ( \
- (R_DMA_CH8_SUB0_CMD__cmd__##f1##__VAL(R_DMA_CH8_SUB0_CMD_, cmd_, v1) << R_DMA_CH8_SUB0_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB0_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB0_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB0_CMD_(f1_,v1) ( \
- (R_DMA_CH8_SUB0_CMD__cmd__##f1_##_VAL(R_DMA_CH8_SUB0_CMD_, cmd_, v1) << R_DMA_CH8_SUB0_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB0_EP
- * - type: RW
- * - addr: 0xb00001c8
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB0_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB0_EP.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB0_EP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB0_EP(f1,v1) ( \
- R_DMA_CH8_SUB0_EP__WRITE(R_DMA_CH8_SUB0_EP__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB0_EP_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB0_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB0_EP(f1,v1) ( \
- (R_DMA_CH8_SUB0_EP__ep__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB0_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB0_EP.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB0_EP(f1,v1) ( \
- (R_DMA_CH8_SUB0_EP__ep__##f1##__VAL(R_DMA_CH8_SUB0_EP_, ep_, v1) << R_DMA_CH8_SUB0_EP__ep__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB0_EP_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB0_EP.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB0_EP_(f1_,v1) ( \
- (R_DMA_CH8_SUB0_EP__ep__##f1_##_VAL(R_DMA_CH8_SUB0_EP_, ep_, v1) << R_DMA_CH8_SUB0_EP__ep__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB1_CLR_INTR
- * - type: WO
- * - addr: 0xb00001e7
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB1_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB1_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB1_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB1_CLR_INTR(f1,v1) ( \
- *R_DMA_CH8_SUB1_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_SUB1_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_SUB1_CLR_INTR_(f1##_,v1) \
- ), \
- R_DMA_CH8_SUB1_CLR_INTR__WRITE(R_DMA_CH8_SUB1_CLR_INTR__ADDR, *R_DMA_CH8_SUB1_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB1_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB1_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH8_SUB1_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB1_CLR_INTR__SHADOW(f1,v1) ( \
- *R_DMA_CH8_SUB1_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_SUB1_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_SUB1_CLR_INTR_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB1_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB1_CLR_INTR(f1,v1) ( \
- (R_DMA_CH8_SUB1_CLR_INTR__clr_descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB1_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB1_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB1_CLR_INTR(f1,v1) ( \
- (R_DMA_CH8_SUB1_CLR_INTR__clr_descr__##f1##__VAL(R_DMA_CH8_SUB1_CLR_INTR_, clr_descr_, v1) << R_DMA_CH8_SUB1_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB1_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB1_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB1_CLR_INTR_(f1_,v1) ( \
- (R_DMA_CH8_SUB1_CLR_INTR__clr_descr__##f1_##_VAL(R_DMA_CH8_SUB1_CLR_INTR_, clr_descr_, v1) << R_DMA_CH8_SUB1_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB1_CMD
- * - type: RW
- * - addr: 0xb00001d7
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB1_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB1_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB1_CMD(f1,v1) ( \
- R_DMA_CH8_SUB1_CMD__WRITE(R_DMA_CH8_SUB1_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB1_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB1_CMD(f1,v1) ( \
- (R_DMA_CH8_SUB1_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB1_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB1_CMD(f1,v1) ( \
- (R_DMA_CH8_SUB1_CMD__cmd__##f1##__VAL(R_DMA_CH8_SUB1_CMD_, cmd_, v1) << R_DMA_CH8_SUB1_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB1_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB1_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB1_CMD_(f1_,v1) ( \
- (R_DMA_CH8_SUB1_CMD__cmd__##f1_##_VAL(R_DMA_CH8_SUB1_CMD_, cmd_, v1) << R_DMA_CH8_SUB1_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB1_EP
- * - type: RW
- * - addr: 0xb00001cc
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB1_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB1_EP.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB1_EP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB1_EP(f1,v1) ( \
- R_DMA_CH8_SUB1_EP__WRITE(R_DMA_CH8_SUB1_EP__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB1_EP_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB1_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB1_EP(f1,v1) ( \
- (R_DMA_CH8_SUB1_EP__ep__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB1_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB1_EP.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB1_EP(f1,v1) ( \
- (R_DMA_CH8_SUB1_EP__ep__##f1##__VAL(R_DMA_CH8_SUB1_EP_, ep_, v1) << R_DMA_CH8_SUB1_EP__ep__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB1_EP_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB1_EP.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB1_EP_(f1_,v1) ( \
- (R_DMA_CH8_SUB1_EP__ep__##f1_##_VAL(R_DMA_CH8_SUB1_EP_, ep_, v1) << R_DMA_CH8_SUB1_EP__ep__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB2_CLR_INTR
- * - type: WO
- * - addr: 0xb00001eb
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB2_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB2_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB2_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB2_CLR_INTR(f1,v1) ( \
- *R_DMA_CH8_SUB2_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_SUB2_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_SUB2_CLR_INTR_(f1##_,v1) \
- ), \
- R_DMA_CH8_SUB2_CLR_INTR__WRITE(R_DMA_CH8_SUB2_CLR_INTR__ADDR, *R_DMA_CH8_SUB2_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB2_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB2_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH8_SUB2_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB2_CLR_INTR__SHADOW(f1,v1) ( \
- *R_DMA_CH8_SUB2_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_SUB2_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_SUB2_CLR_INTR_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB2_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB2_CLR_INTR(f1,v1) ( \
- (R_DMA_CH8_SUB2_CLR_INTR__clr_descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB2_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB2_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB2_CLR_INTR(f1,v1) ( \
- (R_DMA_CH8_SUB2_CLR_INTR__clr_descr__##f1##__VAL(R_DMA_CH8_SUB2_CLR_INTR_, clr_descr_, v1) << R_DMA_CH8_SUB2_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB2_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB2_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB2_CLR_INTR_(f1_,v1) ( \
- (R_DMA_CH8_SUB2_CLR_INTR__clr_descr__##f1_##_VAL(R_DMA_CH8_SUB2_CLR_INTR_, clr_descr_, v1) << R_DMA_CH8_SUB2_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB2_CMD
- * - type: RW
- * - addr: 0xb00001db
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB2_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB2_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB2_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB2_CMD(f1,v1) ( \
- R_DMA_CH8_SUB2_CMD__WRITE(R_DMA_CH8_SUB2_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB2_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB2_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB2_CMD(f1,v1) ( \
- (R_DMA_CH8_SUB2_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB2_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB2_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB2_CMD(f1,v1) ( \
- (R_DMA_CH8_SUB2_CMD__cmd__##f1##__VAL(R_DMA_CH8_SUB2_CMD_, cmd_, v1) << R_DMA_CH8_SUB2_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB2_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB2_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB2_CMD_(f1_,v1) ( \
- (R_DMA_CH8_SUB2_CMD__cmd__##f1_##_VAL(R_DMA_CH8_SUB2_CMD_, cmd_, v1) << R_DMA_CH8_SUB2_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB2_EP
- * - type: RW
- * - addr: 0xb00001f8
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB2_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB2_EP.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB2_EP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB2_EP(f1,v1) ( \
- R_DMA_CH8_SUB2_EP__WRITE(R_DMA_CH8_SUB2_EP__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB2_EP_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB2_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB2_EP(f1,v1) ( \
- (R_DMA_CH8_SUB2_EP__ep__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB2_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB2_EP.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB2_EP(f1,v1) ( \
- (R_DMA_CH8_SUB2_EP__ep__##f1##__VAL(R_DMA_CH8_SUB2_EP_, ep_, v1) << R_DMA_CH8_SUB2_EP__ep__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB2_EP_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB2_EP.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB2_EP_(f1_,v1) ( \
- (R_DMA_CH8_SUB2_EP__ep__##f1_##_VAL(R_DMA_CH8_SUB2_EP_, ep_, v1) << R_DMA_CH8_SUB2_EP__ep__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB3_CLR_INTR
- * - type: WO
- * - addr: 0xb00001ef
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB3_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB3_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB3_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB3_CLR_INTR(f1,v1) ( \
- *R_DMA_CH8_SUB3_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_SUB3_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_SUB3_CLR_INTR_(f1##_,v1) \
- ), \
- R_DMA_CH8_SUB3_CLR_INTR__WRITE(R_DMA_CH8_SUB3_CLR_INTR__ADDR, *R_DMA_CH8_SUB3_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB3_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB3_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH8_SUB3_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB3_CLR_INTR__SHADOW(f1,v1) ( \
- *R_DMA_CH8_SUB3_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH8_SUB3_CLR_INTR_) \
- REG_VAL__R_DMA_CH8_SUB3_CLR_INTR_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB3_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB3_CLR_INTR(f1,v1) ( \
- (R_DMA_CH8_SUB3_CLR_INTR__clr_descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB3_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB3_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB3_CLR_INTR(f1,v1) ( \
- (R_DMA_CH8_SUB3_CLR_INTR__clr_descr__##f1##__VAL(R_DMA_CH8_SUB3_CLR_INTR_, clr_descr_, v1) << R_DMA_CH8_SUB3_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB3_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB3_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB3_CLR_INTR_(f1_,v1) ( \
- (R_DMA_CH8_SUB3_CLR_INTR__clr_descr__##f1_##_VAL(R_DMA_CH8_SUB3_CLR_INTR_, clr_descr_, v1) << R_DMA_CH8_SUB3_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB3_CMD
- * - type: RW
- * - addr: 0xb00001df
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB3_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB3_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB3_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB3_CMD(f1,v1) ( \
- R_DMA_CH8_SUB3_CMD__WRITE(R_DMA_CH8_SUB3_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB3_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB3_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB3_CMD(f1,v1) ( \
- (R_DMA_CH8_SUB3_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB3_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB3_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB3_CMD(f1,v1) ( \
- (R_DMA_CH8_SUB3_CMD__cmd__##f1##__VAL(R_DMA_CH8_SUB3_CMD_, cmd_, v1) << R_DMA_CH8_SUB3_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB3_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB3_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB3_CMD_(f1_,v1) ( \
- (R_DMA_CH8_SUB3_CMD__cmd__##f1_##_VAL(R_DMA_CH8_SUB3_CMD_, cmd_, v1) << R_DMA_CH8_SUB3_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH8_SUB3_EP
- * - type: RW
- * - addr: 0xb00001fc
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH8_SUB3_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH8_SUB3_EP.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH8_SUB3_EP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH8_SUB3_EP(f1,v1) ( \
- R_DMA_CH8_SUB3_EP__WRITE(R_DMA_CH8_SUB3_EP__ADDR, ( \
- REG_VAL__R_DMA_CH8_SUB3_EP_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH8_SUB3_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH8_SUB3_EP(f1,v1) ( \
- (R_DMA_CH8_SUB3_EP__ep__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB3_EP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB3_EP.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB3_EP(f1,v1) ( \
- (R_DMA_CH8_SUB3_EP__ep__##f1##__VAL(R_DMA_CH8_SUB3_EP_, ep_, v1) << R_DMA_CH8_SUB3_EP__ep__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH8_SUB3_EP_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH8_SUB3_EP.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH8_SUB3_EP_(f1_,v1) ( \
- (R_DMA_CH8_SUB3_EP__ep__##f1_##_VAL(R_DMA_CH8_SUB3_EP_, ep_, v1) << R_DMA_CH8_SUB3_EP__ep__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH9_BUF
- * - type: RW
- * - addr: 0xb0000198
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH9_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH9_BUF.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH9_BUF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH9_BUF(f1,v1) ( \
- R_DMA_CH9_BUF__WRITE(R_DMA_CH9_BUF__ADDR, ( \
- REG_VAL__R_DMA_CH9_BUF_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH9_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH9_BUF(f1,v1) ( \
- (R_DMA_CH9_BUF__buf__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_BUF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_BUF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_BUF(f1,v1) ( \
- (R_DMA_CH9_BUF__buf__##f1##__VAL(R_DMA_CH9_BUF_, buf_, v1) << R_DMA_CH9_BUF__buf__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_BUF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_BUF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_BUF_(f1_,v1) ( \
- (R_DMA_CH9_BUF__buf__##f1_##_VAL(R_DMA_CH9_BUF_, buf_, v1) << R_DMA_CH9_BUF__buf__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH9_CLR_INTR
- * - type: WO
- * - addr: 0xb00001f5
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH9_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH9_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH9_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH9_CLR_INTR(f1,v1,f2,v2) ( \
- *R_DMA_CH9_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH9_CLR_INTR_) \
- REG_VAL__R_DMA_CH9_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ), \
- R_DMA_CH9_CLR_INTR__WRITE(R_DMA_CH9_CLR_INTR__ADDR, *R_DMA_CH9_CLR_INTR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH9_CLR_INTR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH9_CLR_INTR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DMA_CH9_CLR_INTR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH9_CLR_INTR__SHADOW(f1,v1,f2,v2) ( \
- *R_DMA_CH9_CLR_INTR__SADDR = ( \
- REG_INITIATED(R_DMA_CH9_CLR_INTR_) \
- REG_VAL__R_DMA_CH9_CLR_INTR_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH9_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH9_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH9_CLR_INTR__clr_eop__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH9_CLR_INTR__clr_descr__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_CLR_INTR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_CLR_INTR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_CLR_INTR(f1,v1,f2,v2) ( \
- (R_DMA_CH9_CLR_INTR__clr_eop__##f1##__VAL(R_DMA_CH9_CLR_INTR_, clr_eop_, v1) << R_DMA_CH9_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH9_CLR_INTR__clr_descr__##f2##__VAL(R_DMA_CH9_CLR_INTR_, clr_descr_, v2) << R_DMA_CH9_CLR_INTR__clr_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_CLR_INTR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_CLR_INTR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_CLR_INTR_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH9_CLR_INTR__clr_eop__##f1_##_VAL(R_DMA_CH9_CLR_INTR_, clr_eop_, v1) << R_DMA_CH9_CLR_INTR__clr_eop__BITNR) | \
- (R_DMA_CH9_CLR_INTR__clr_descr__##f2_##_VAL(R_DMA_CH9_CLR_INTR_, clr_descr_, v2) << R_DMA_CH9_CLR_INTR__clr_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH9_CMD
- * - type: RW
- * - addr: 0xb00001f4
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH9_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH9_CMD.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH9_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH9_CMD(f1,v1) ( \
- R_DMA_CH9_CMD__WRITE(R_DMA_CH9_CMD__ADDR, ( \
- REG_VAL__R_DMA_CH9_CMD_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH9_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH9_CMD(f1,v1) ( \
- (R_DMA_CH9_CMD__cmd__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_CMD(f1,v1) ( \
- (R_DMA_CH9_CMD__cmd__##f1##__VAL(R_DMA_CH9_CMD_, cmd_, v1) << R_DMA_CH9_CMD__cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_CMD_(f1_,v1) ( \
- (R_DMA_CH9_CMD__cmd__##f1_##_VAL(R_DMA_CH9_CMD_, cmd_, v1) << R_DMA_CH9_CMD__cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH9_DESCR
- * - type: RW
- * - addr: 0xb000019c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH9_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH9_DESCR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH9_DESCR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH9_DESCR(f1,v1) ( \
- R_DMA_CH9_DESCR__WRITE(R_DMA_CH9_DESCR__ADDR, ( \
- REG_VAL__R_DMA_CH9_DESCR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH9_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH9_DESCR(f1,v1) ( \
- (R_DMA_CH9_DESCR__descr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_DESCR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_DESCR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_DESCR(f1,v1) ( \
- (R_DMA_CH9_DESCR__descr__##f1##__VAL(R_DMA_CH9_DESCR_, descr_, v1) << R_DMA_CH9_DESCR__descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_DESCR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_DESCR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_DESCR_(f1_,v1) ( \
- (R_DMA_CH9_DESCR__descr__##f1_##_VAL(R_DMA_CH9_DESCR_, descr_, v1) << R_DMA_CH9_DESCR__descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH9_FIRST
- * - type: RW
- * - addr: 0xb00001c4
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH9_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH9_FIRST.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH9_FIRST.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH9_FIRST(f1,v1) ( \
- R_DMA_CH9_FIRST__WRITE(R_DMA_CH9_FIRST__ADDR, ( \
- REG_VAL__R_DMA_CH9_FIRST_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH9_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH9_FIRST(f1,v1) ( \
- (R_DMA_CH9_FIRST__first__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_FIRST
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_FIRST.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_FIRST(f1,v1) ( \
- (R_DMA_CH9_FIRST__first__##f1##__VAL(R_DMA_CH9_FIRST_, first_, v1) << R_DMA_CH9_FIRST__first__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_FIRST_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_FIRST.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_FIRST_(f1_,v1) ( \
- (R_DMA_CH9_FIRST__first__##f1_##_VAL(R_DMA_CH9_FIRST_, first_, v1) << R_DMA_CH9_FIRST__first__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH9_HWSW
- * - type: RW
- * - addr: 0xb0000190
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH9_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH9_HWSW.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH9_HWSW.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH9_HWSW(f1,v1,f2,v2) ( \
- R_DMA_CH9_HWSW__WRITE(R_DMA_CH9_HWSW__ADDR, ( \
- REG_VAL__R_DMA_CH9_HWSW_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH9_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH9_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH9_HWSW__hw__##f1##__MASK & REG__##v1) | \
- (R_DMA_CH9_HWSW__sw__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_HWSW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_HWSW.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_HWSW(f1,v1,f2,v2) ( \
- (R_DMA_CH9_HWSW__hw__##f1##__VAL(R_DMA_CH9_HWSW_, hw_, v1) << R_DMA_CH9_HWSW__hw__BITNR) | \
- (R_DMA_CH9_HWSW__sw__##f2##__VAL(R_DMA_CH9_HWSW_, sw_, v2) << R_DMA_CH9_HWSW__sw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_HWSW_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_HWSW.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_HWSW_(f1_,v1,f2_,v2) ( \
- (R_DMA_CH9_HWSW__hw__##f1_##_VAL(R_DMA_CH9_HWSW_, hw_, v1) << R_DMA_CH9_HWSW__hw__BITNR) | \
- (R_DMA_CH9_HWSW__sw__##f2_##_VAL(R_DMA_CH9_HWSW_, sw_, v2) << R_DMA_CH9_HWSW__sw__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH9_NEXT
- * - type: RW
- * - addr: 0xb0000194
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DMA_CH9_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DMA_CH9_NEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DMA_CH9_NEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DMA_CH9_NEXT(f1,v1) ( \
- R_DMA_CH9_NEXT__WRITE(R_DMA_CH9_NEXT__ADDR, ( \
- REG_VAL__R_DMA_CH9_NEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH9_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH9_NEXT(f1,v1) ( \
- (R_DMA_CH9_NEXT__next__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_NEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_NEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_NEXT(f1,v1) ( \
- (R_DMA_CH9_NEXT__next__##f1##__VAL(R_DMA_CH9_NEXT_, next_, v1) << R_DMA_CH9_NEXT__next__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_NEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_NEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_NEXT_(f1_,v1) ( \
- (R_DMA_CH9_NEXT__next__##f1_##_VAL(R_DMA_CH9_NEXT_, next_, v1) << R_DMA_CH9_NEXT__next__BITNR) \
-)
-
-#endif
-
-/*
- * R_DMA_CH9_STATUS
- * - type: RO
- * - addr: 0xb00001f6
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DMA_CH9_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DMA_CH9_STATUS(f1,v1) ( \
- (R_DMA_CH9_STATUS__avail__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_STATUS(f1,v1) ( \
- (R_DMA_CH9_STATUS__avail__##f1##__VAL(R_DMA_CH9_STATUS_, avail_, v1) << R_DMA_CH9_STATUS__avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DMA_CH9_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DMA_CH9_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DMA_CH9_STATUS_(f1_,v1) ( \
- (R_DMA_CH9_STATUS__avail__##f1_##_VAL(R_DMA_CH9_STATUS_, avail_, v1) << R_DMA_CH9_STATUS__avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_DRAM_CONFIG
- * - type: WO
- * - addr: 0xb000000c
- * - group: Bus interface configuration registers
- */
-
-#if USE_GROUP__Bus_interface_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DRAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DRAM_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DRAM_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DRAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- *R_DRAM_CONFIG__SADDR = ( \
- REG_INITIATED(R_DRAM_CONFIG_) \
- REG_VAL__R_DRAM_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) \
- ), \
- R_DRAM_CONFIG__WRITE(R_DRAM_CONFIG__ADDR, *R_DRAM_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DRAM_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DRAM_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DRAM_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DRAM_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- *R_DRAM_CONFIG__SADDR = ( \
- REG_INITIATED(R_DRAM_CONFIG_) \
- REG_VAL__R_DRAM_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DRAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DRAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_DRAM_CONFIG__wmm1__##f1##__MASK & REG__##v1) | \
- (R_DRAM_CONFIG__wmm0__##f2##__MASK & REG__##v2) | \
- (R_DRAM_CONFIG__sh1__##f3##__MASK & REG__##v3) | \
- (R_DRAM_CONFIG__sh0__##f4##__MASK & REG__##v4) | \
- (R_DRAM_CONFIG__w__##f5##__MASK & REG__##v5) | \
- (R_DRAM_CONFIG__c__##f6##__MASK & REG__##v6) | \
- (R_DRAM_CONFIG__e__##f7##__MASK & REG__##v7) | \
- (R_DRAM_CONFIG__group_sel__##f8##__MASK & REG__##v8) | \
- (R_DRAM_CONFIG__ca1__##f9##__MASK & REG__##v9) | \
- (R_DRAM_CONFIG__bank23sel__##f10##__MASK & REG__##v10) | \
- (R_DRAM_CONFIG__ca0__##f11##__MASK & REG__##v11) | \
- (R_DRAM_CONFIG__bank01sel__##f12##__MASK & REG__##v12) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DRAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DRAM_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DRAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_DRAM_CONFIG__wmm1__##f1##__VAL(R_DRAM_CONFIG_, wmm1_, v1) << R_DRAM_CONFIG__wmm1__BITNR) | \
- (R_DRAM_CONFIG__wmm0__##f2##__VAL(R_DRAM_CONFIG_, wmm0_, v2) << R_DRAM_CONFIG__wmm0__BITNR) | \
- (R_DRAM_CONFIG__sh1__##f3##__VAL(R_DRAM_CONFIG_, sh1_, v3) << R_DRAM_CONFIG__sh1__BITNR) | \
- (R_DRAM_CONFIG__sh0__##f4##__VAL(R_DRAM_CONFIG_, sh0_, v4) << R_DRAM_CONFIG__sh0__BITNR) | \
- (R_DRAM_CONFIG__w__##f5##__VAL(R_DRAM_CONFIG_, w_, v5) << R_DRAM_CONFIG__w__BITNR) | \
- (R_DRAM_CONFIG__c__##f6##__VAL(R_DRAM_CONFIG_, c_, v6) << R_DRAM_CONFIG__c__BITNR) | \
- (R_DRAM_CONFIG__e__##f7##__VAL(R_DRAM_CONFIG_, e_, v7) << R_DRAM_CONFIG__e__BITNR) | \
- (R_DRAM_CONFIG__group_sel__##f8##__VAL(R_DRAM_CONFIG_, group_sel_, v8) << R_DRAM_CONFIG__group_sel__BITNR) | \
- (R_DRAM_CONFIG__ca1__##f9##__VAL(R_DRAM_CONFIG_, ca1_, v9) << R_DRAM_CONFIG__ca1__BITNR) | \
- (R_DRAM_CONFIG__bank23sel__##f10##__VAL(R_DRAM_CONFIG_, bank23sel_, v10) << R_DRAM_CONFIG__bank23sel__BITNR) | \
- (R_DRAM_CONFIG__ca0__##f11##__VAL(R_DRAM_CONFIG_, ca0_, v11) << R_DRAM_CONFIG__ca0__BITNR) | \
- (R_DRAM_CONFIG__bank01sel__##f12##__VAL(R_DRAM_CONFIG_, bank01sel_, v12) << R_DRAM_CONFIG__bank01sel__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DRAM_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DRAM_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DRAM_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12) ( \
- (R_DRAM_CONFIG__wmm1__##f1_##_VAL(R_DRAM_CONFIG_, wmm1_, v1) << R_DRAM_CONFIG__wmm1__BITNR) | \
- (R_DRAM_CONFIG__wmm0__##f2_##_VAL(R_DRAM_CONFIG_, wmm0_, v2) << R_DRAM_CONFIG__wmm0__BITNR) | \
- (R_DRAM_CONFIG__sh1__##f3_##_VAL(R_DRAM_CONFIG_, sh1_, v3) << R_DRAM_CONFIG__sh1__BITNR) | \
- (R_DRAM_CONFIG__sh0__##f4_##_VAL(R_DRAM_CONFIG_, sh0_, v4) << R_DRAM_CONFIG__sh0__BITNR) | \
- (R_DRAM_CONFIG__w__##f5_##_VAL(R_DRAM_CONFIG_, w_, v5) << R_DRAM_CONFIG__w__BITNR) | \
- (R_DRAM_CONFIG__c__##f6_##_VAL(R_DRAM_CONFIG_, c_, v6) << R_DRAM_CONFIG__c__BITNR) | \
- (R_DRAM_CONFIG__e__##f7_##_VAL(R_DRAM_CONFIG_, e_, v7) << R_DRAM_CONFIG__e__BITNR) | \
- (R_DRAM_CONFIG__group_sel__##f8_##_VAL(R_DRAM_CONFIG_, group_sel_, v8) << R_DRAM_CONFIG__group_sel__BITNR) | \
- (R_DRAM_CONFIG__ca1__##f9_##_VAL(R_DRAM_CONFIG_, ca1_, v9) << R_DRAM_CONFIG__ca1__BITNR) | \
- (R_DRAM_CONFIG__bank23sel__##f10_##_VAL(R_DRAM_CONFIG_, bank23sel_, v10) << R_DRAM_CONFIG__bank23sel__BITNR) | \
- (R_DRAM_CONFIG__ca0__##f11_##_VAL(R_DRAM_CONFIG_, ca0_, v11) << R_DRAM_CONFIG__ca0__BITNR) | \
- (R_DRAM_CONFIG__bank01sel__##f12_##_VAL(R_DRAM_CONFIG_, bank01sel_, v12) << R_DRAM_CONFIG__bank01sel__BITNR) \
-)
-
-#endif
-
-/*
- * R_DRAM_TIMING
- * - type: WO
- * - addr: 0xb0000008
- * - group: Bus interface configuration registers
- */
-
-#if USE_GROUP__Bus_interface_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DRAM_TIMING
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DRAM_TIMING.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_DRAM_TIMING.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DRAM_TIMING(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_DRAM_TIMING__SADDR = ( \
- REG_INITIATED(R_DRAM_TIMING_) \
- REG_VAL__R_DRAM_TIMING_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ), \
- R_DRAM_TIMING__WRITE(R_DRAM_TIMING__ADDR, *R_DRAM_TIMING__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_DRAM_TIMING__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_DRAM_TIMING.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_DRAM_TIMING.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_DRAM_TIMING__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_DRAM_TIMING__SADDR = ( \
- REG_INITIATED(R_DRAM_TIMING_) \
- REG_VAL__R_DRAM_TIMING_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_DRAM_TIMING
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_DRAM_TIMING(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_DRAM_TIMING__sdram__##f1##__MASK & REG__##v1) | \
- (R_DRAM_TIMING__ref__##f2##__MASK & REG__##v2) | \
- (R_DRAM_TIMING__rp__##f3##__MASK & REG__##v3) | \
- (R_DRAM_TIMING__rs__##f4##__MASK & REG__##v4) | \
- (R_DRAM_TIMING__rh__##f5##__MASK & REG__##v5) | \
- (R_DRAM_TIMING__w__##f6##__MASK & REG__##v6) | \
- (R_DRAM_TIMING__c__##f7##__MASK & REG__##v7) | \
- (R_DRAM_TIMING__cz__##f8##__MASK & REG__##v8) | \
- (R_DRAM_TIMING__cp__##f9##__MASK & REG__##v9) | \
- (R_DRAM_TIMING__cw__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DRAM_TIMING
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DRAM_TIMING.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_DRAM_TIMING(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_DRAM_TIMING__sdram__##f1##__VAL(R_DRAM_TIMING_, sdram_, v1) << R_DRAM_TIMING__sdram__BITNR) | \
- (R_DRAM_TIMING__ref__##f2##__VAL(R_DRAM_TIMING_, ref_, v2) << R_DRAM_TIMING__ref__BITNR) | \
- (R_DRAM_TIMING__rp__##f3##__VAL(R_DRAM_TIMING_, rp_, v3) << R_DRAM_TIMING__rp__BITNR) | \
- (R_DRAM_TIMING__rs__##f4##__VAL(R_DRAM_TIMING_, rs_, v4) << R_DRAM_TIMING__rs__BITNR) | \
- (R_DRAM_TIMING__rh__##f5##__VAL(R_DRAM_TIMING_, rh_, v5) << R_DRAM_TIMING__rh__BITNR) | \
- (R_DRAM_TIMING__w__##f6##__VAL(R_DRAM_TIMING_, w_, v6) << R_DRAM_TIMING__w__BITNR) | \
- (R_DRAM_TIMING__c__##f7##__VAL(R_DRAM_TIMING_, c_, v7) << R_DRAM_TIMING__c__BITNR) | \
- (R_DRAM_TIMING__cz__##f8##__VAL(R_DRAM_TIMING_, cz_, v8) << R_DRAM_TIMING__cz__BITNR) | \
- (R_DRAM_TIMING__cp__##f9##__VAL(R_DRAM_TIMING_, cp_, v9) << R_DRAM_TIMING__cp__BITNR) | \
- (R_DRAM_TIMING__cw__##f10##__VAL(R_DRAM_TIMING_, cw_, v10) << R_DRAM_TIMING__cw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_DRAM_TIMING_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_DRAM_TIMING.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_DRAM_TIMING_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_DRAM_TIMING__sdram__##f1_##_VAL(R_DRAM_TIMING_, sdram_, v1) << R_DRAM_TIMING__sdram__BITNR) | \
- (R_DRAM_TIMING__ref__##f2_##_VAL(R_DRAM_TIMING_, ref_, v2) << R_DRAM_TIMING__ref__BITNR) | \
- (R_DRAM_TIMING__rp__##f3_##_VAL(R_DRAM_TIMING_, rp_, v3) << R_DRAM_TIMING__rp__BITNR) | \
- (R_DRAM_TIMING__rs__##f4_##_VAL(R_DRAM_TIMING_, rs_, v4) << R_DRAM_TIMING__rs__BITNR) | \
- (R_DRAM_TIMING__rh__##f5_##_VAL(R_DRAM_TIMING_, rh_, v5) << R_DRAM_TIMING__rh__BITNR) | \
- (R_DRAM_TIMING__w__##f6_##_VAL(R_DRAM_TIMING_, w_, v6) << R_DRAM_TIMING__w__BITNR) | \
- (R_DRAM_TIMING__c__##f7_##_VAL(R_DRAM_TIMING_, c_, v7) << R_DRAM_TIMING__c__BITNR) | \
- (R_DRAM_TIMING__cz__##f8_##_VAL(R_DRAM_TIMING_, cz_, v8) << R_DRAM_TIMING__cz__BITNR) | \
- (R_DRAM_TIMING__cp__##f9_##_VAL(R_DRAM_TIMING_, cp_, v9) << R_DRAM_TIMING__cp__BITNR) | \
- (R_DRAM_TIMING__cw__##f10_##_VAL(R_DRAM_TIMING_, cw_, v10) << R_DRAM_TIMING__cw__BITNR) \
-)
-
-#endif
-
-/*
- * R_EXT_DMA_0_ADDR
- * - type: WO
- * - addr: 0xb0000014
- * - group: External DMA registers
- */
-
-#if USE_GROUP__External_DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_EXT_DMA_0_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_EXT_DMA_0_ADDR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_EXT_DMA_0_ADDR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_EXT_DMA_0_ADDR(f1,v1) ( \
- *R_EXT_DMA_0_ADDR__SADDR = ( \
- REG_INITIATED(R_EXT_DMA_0_ADDR_) \
- REG_VAL__R_EXT_DMA_0_ADDR_(f1##_,v1) \
- ), \
- R_EXT_DMA_0_ADDR__WRITE(R_EXT_DMA_0_ADDR__ADDR, *R_EXT_DMA_0_ADDR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_EXT_DMA_0_ADDR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_EXT_DMA_0_ADDR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_EXT_DMA_0_ADDR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_EXT_DMA_0_ADDR__SHADOW(f1,v1) ( \
- *R_EXT_DMA_0_ADDR__SADDR = ( \
- REG_INITIATED(R_EXT_DMA_0_ADDR_) \
- REG_VAL__R_EXT_DMA_0_ADDR_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_EXT_DMA_0_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_EXT_DMA_0_ADDR(f1,v1) ( \
- (R_EXT_DMA_0_ADDR__ext0_addr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_0_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_0_ADDR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_0_ADDR(f1,v1) ( \
- (R_EXT_DMA_0_ADDR__ext0_addr__##f1##__VAL(R_EXT_DMA_0_ADDR_, ext0_addr_, v1) << R_EXT_DMA_0_ADDR__ext0_addr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_0_ADDR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_0_ADDR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_0_ADDR_(f1_,v1) ( \
- (R_EXT_DMA_0_ADDR__ext0_addr__##f1_##_VAL(R_EXT_DMA_0_ADDR_, ext0_addr_, v1) << R_EXT_DMA_0_ADDR__ext0_addr__BITNR) \
-)
-
-#endif
-
-/*
- * R_EXT_DMA_0_CMD
- * - type: WO
- * - addr: 0xb0000010
- * - group: External DMA registers
- */
-
-#if USE_GROUP__External_DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_EXT_DMA_0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_EXT_DMA_0_CMD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_EXT_DMA_0_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_EXT_DMA_0_CMD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_EXT_DMA_0_CMD__SADDR = ( \
- REG_INITIATED(R_EXT_DMA_0_CMD_) \
- REG_VAL__R_EXT_DMA_0_CMD_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_EXT_DMA_0_CMD__WRITE(R_EXT_DMA_0_CMD__ADDR, *R_EXT_DMA_0_CMD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_EXT_DMA_0_CMD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_EXT_DMA_0_CMD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_EXT_DMA_0_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_EXT_DMA_0_CMD__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_EXT_DMA_0_CMD__SADDR = ( \
- REG_INITIATED(R_EXT_DMA_0_CMD_) \
- REG_VAL__R_EXT_DMA_0_CMD_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_EXT_DMA_0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_EXT_DMA_0_CMD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_EXT_DMA_0_CMD__cnt__##f1##__MASK & REG__##v1) | \
- (R_EXT_DMA_0_CMD__rqpol__##f2##__MASK & REG__##v2) | \
- (R_EXT_DMA_0_CMD__apol__##f3##__MASK & REG__##v3) | \
- (R_EXT_DMA_0_CMD__rq_ack__##f4##__MASK & REG__##v4) | \
- (R_EXT_DMA_0_CMD__wid__##f5##__MASK & REG__##v5) | \
- (R_EXT_DMA_0_CMD__dir__##f6##__MASK & REG__##v6) | \
- (R_EXT_DMA_0_CMD__run__##f7##__MASK & REG__##v7) | \
- (R_EXT_DMA_0_CMD__trf_count__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_0_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_0_CMD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_EXT_DMA_0_CMD__cnt__##f1##__VAL(R_EXT_DMA_0_CMD_, cnt_, v1) << R_EXT_DMA_0_CMD__cnt__BITNR) | \
- (R_EXT_DMA_0_CMD__rqpol__##f2##__VAL(R_EXT_DMA_0_CMD_, rqpol_, v2) << R_EXT_DMA_0_CMD__rqpol__BITNR) | \
- (R_EXT_DMA_0_CMD__apol__##f3##__VAL(R_EXT_DMA_0_CMD_, apol_, v3) << R_EXT_DMA_0_CMD__apol__BITNR) | \
- (R_EXT_DMA_0_CMD__rq_ack__##f4##__VAL(R_EXT_DMA_0_CMD_, rq_ack_, v4) << R_EXT_DMA_0_CMD__rq_ack__BITNR) | \
- (R_EXT_DMA_0_CMD__wid__##f5##__VAL(R_EXT_DMA_0_CMD_, wid_, v5) << R_EXT_DMA_0_CMD__wid__BITNR) | \
- (R_EXT_DMA_0_CMD__dir__##f6##__VAL(R_EXT_DMA_0_CMD_, dir_, v6) << R_EXT_DMA_0_CMD__dir__BITNR) | \
- (R_EXT_DMA_0_CMD__run__##f7##__VAL(R_EXT_DMA_0_CMD_, run_, v7) << R_EXT_DMA_0_CMD__run__BITNR) | \
- (R_EXT_DMA_0_CMD__trf_count__##f8##__VAL(R_EXT_DMA_0_CMD_, trf_count_, v8) << R_EXT_DMA_0_CMD__trf_count__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_0_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_0_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_0_CMD_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_EXT_DMA_0_CMD__cnt__##f1_##_VAL(R_EXT_DMA_0_CMD_, cnt_, v1) << R_EXT_DMA_0_CMD__cnt__BITNR) | \
- (R_EXT_DMA_0_CMD__rqpol__##f2_##_VAL(R_EXT_DMA_0_CMD_, rqpol_, v2) << R_EXT_DMA_0_CMD__rqpol__BITNR) | \
- (R_EXT_DMA_0_CMD__apol__##f3_##_VAL(R_EXT_DMA_0_CMD_, apol_, v3) << R_EXT_DMA_0_CMD__apol__BITNR) | \
- (R_EXT_DMA_0_CMD__rq_ack__##f4_##_VAL(R_EXT_DMA_0_CMD_, rq_ack_, v4) << R_EXT_DMA_0_CMD__rq_ack__BITNR) | \
- (R_EXT_DMA_0_CMD__wid__##f5_##_VAL(R_EXT_DMA_0_CMD_, wid_, v5) << R_EXT_DMA_0_CMD__wid__BITNR) | \
- (R_EXT_DMA_0_CMD__dir__##f6_##_VAL(R_EXT_DMA_0_CMD_, dir_, v6) << R_EXT_DMA_0_CMD__dir__BITNR) | \
- (R_EXT_DMA_0_CMD__run__##f7_##_VAL(R_EXT_DMA_0_CMD_, run_, v7) << R_EXT_DMA_0_CMD__run__BITNR) | \
- (R_EXT_DMA_0_CMD__trf_count__##f8_##_VAL(R_EXT_DMA_0_CMD_, trf_count_, v8) << R_EXT_DMA_0_CMD__trf_count__BITNR) \
-)
-
-#endif
-
-/*
- * R_EXT_DMA_0_STAT
- * - type: RO
- * - addr: 0xb0000010
- * - group: External DMA registers
- */
-
-#if USE_GROUP__External_DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_EXT_DMA_0_STAT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_EXT_DMA_0_STAT(f1,v1,f2,v2) ( \
- (R_EXT_DMA_0_STAT__run__##f1##__MASK & REG__##v1) | \
- (R_EXT_DMA_0_STAT__trf_count__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_0_STAT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_0_STAT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_0_STAT(f1,v1,f2,v2) ( \
- (R_EXT_DMA_0_STAT__run__##f1##__VAL(R_EXT_DMA_0_STAT_, run_, v1) << R_EXT_DMA_0_STAT__run__BITNR) | \
- (R_EXT_DMA_0_STAT__trf_count__##f2##__VAL(R_EXT_DMA_0_STAT_, trf_count_, v2) << R_EXT_DMA_0_STAT__trf_count__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_0_STAT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_0_STAT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_0_STAT_(f1_,v1,f2_,v2) ( \
- (R_EXT_DMA_0_STAT__run__##f1_##_VAL(R_EXT_DMA_0_STAT_, run_, v1) << R_EXT_DMA_0_STAT__run__BITNR) | \
- (R_EXT_DMA_0_STAT__trf_count__##f2_##_VAL(R_EXT_DMA_0_STAT_, trf_count_, v2) << R_EXT_DMA_0_STAT__trf_count__BITNR) \
-)
-
-#endif
-
-/*
- * R_EXT_DMA_1_ADDR
- * - type: WO
- * - addr: 0xb000001c
- * - group: External DMA registers
- */
-
-#if USE_GROUP__External_DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_EXT_DMA_1_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_EXT_DMA_1_ADDR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_EXT_DMA_1_ADDR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_EXT_DMA_1_ADDR(f1,v1) ( \
- *R_EXT_DMA_1_ADDR__SADDR = ( \
- REG_INITIATED(R_EXT_DMA_1_ADDR_) \
- REG_VAL__R_EXT_DMA_1_ADDR_(f1##_,v1) \
- ), \
- R_EXT_DMA_1_ADDR__WRITE(R_EXT_DMA_1_ADDR__ADDR, *R_EXT_DMA_1_ADDR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_EXT_DMA_1_ADDR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_EXT_DMA_1_ADDR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_EXT_DMA_1_ADDR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_EXT_DMA_1_ADDR__SHADOW(f1,v1) ( \
- *R_EXT_DMA_1_ADDR__SADDR = ( \
- REG_INITIATED(R_EXT_DMA_1_ADDR_) \
- REG_VAL__R_EXT_DMA_1_ADDR_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_EXT_DMA_1_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_EXT_DMA_1_ADDR(f1,v1) ( \
- (R_EXT_DMA_1_ADDR__ext0_addr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_1_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_1_ADDR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_1_ADDR(f1,v1) ( \
- (R_EXT_DMA_1_ADDR__ext0_addr__##f1##__VAL(R_EXT_DMA_1_ADDR_, ext0_addr_, v1) << R_EXT_DMA_1_ADDR__ext0_addr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_1_ADDR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_1_ADDR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_1_ADDR_(f1_,v1) ( \
- (R_EXT_DMA_1_ADDR__ext0_addr__##f1_##_VAL(R_EXT_DMA_1_ADDR_, ext0_addr_, v1) << R_EXT_DMA_1_ADDR__ext0_addr__BITNR) \
-)
-
-#endif
-
-/*
- * R_EXT_DMA_1_CMD
- * - type: WO
- * - addr: 0xb0000018
- * - group: External DMA registers
- */
-
-#if USE_GROUP__External_DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_EXT_DMA_1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_EXT_DMA_1_CMD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_EXT_DMA_1_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_EXT_DMA_1_CMD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_EXT_DMA_1_CMD__SADDR = ( \
- REG_INITIATED(R_EXT_DMA_1_CMD_) \
- REG_VAL__R_EXT_DMA_1_CMD_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_EXT_DMA_1_CMD__WRITE(R_EXT_DMA_1_CMD__ADDR, *R_EXT_DMA_1_CMD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_EXT_DMA_1_CMD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_EXT_DMA_1_CMD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_EXT_DMA_1_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_EXT_DMA_1_CMD__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_EXT_DMA_1_CMD__SADDR = ( \
- REG_INITIATED(R_EXT_DMA_1_CMD_) \
- REG_VAL__R_EXT_DMA_1_CMD_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_EXT_DMA_1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_EXT_DMA_1_CMD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_EXT_DMA_1_CMD__cnt__##f1##__MASK & REG__##v1) | \
- (R_EXT_DMA_1_CMD__rqpol__##f2##__MASK & REG__##v2) | \
- (R_EXT_DMA_1_CMD__apol__##f3##__MASK & REG__##v3) | \
- (R_EXT_DMA_1_CMD__rq_ack__##f4##__MASK & REG__##v4) | \
- (R_EXT_DMA_1_CMD__wid__##f5##__MASK & REG__##v5) | \
- (R_EXT_DMA_1_CMD__dir__##f6##__MASK & REG__##v6) | \
- (R_EXT_DMA_1_CMD__run__##f7##__MASK & REG__##v7) | \
- (R_EXT_DMA_1_CMD__trf_count__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_1_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_1_CMD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_EXT_DMA_1_CMD__cnt__##f1##__VAL(R_EXT_DMA_1_CMD_, cnt_, v1) << R_EXT_DMA_1_CMD__cnt__BITNR) | \
- (R_EXT_DMA_1_CMD__rqpol__##f2##__VAL(R_EXT_DMA_1_CMD_, rqpol_, v2) << R_EXT_DMA_1_CMD__rqpol__BITNR) | \
- (R_EXT_DMA_1_CMD__apol__##f3##__VAL(R_EXT_DMA_1_CMD_, apol_, v3) << R_EXT_DMA_1_CMD__apol__BITNR) | \
- (R_EXT_DMA_1_CMD__rq_ack__##f4##__VAL(R_EXT_DMA_1_CMD_, rq_ack_, v4) << R_EXT_DMA_1_CMD__rq_ack__BITNR) | \
- (R_EXT_DMA_1_CMD__wid__##f5##__VAL(R_EXT_DMA_1_CMD_, wid_, v5) << R_EXT_DMA_1_CMD__wid__BITNR) | \
- (R_EXT_DMA_1_CMD__dir__##f6##__VAL(R_EXT_DMA_1_CMD_, dir_, v6) << R_EXT_DMA_1_CMD__dir__BITNR) | \
- (R_EXT_DMA_1_CMD__run__##f7##__VAL(R_EXT_DMA_1_CMD_, run_, v7) << R_EXT_DMA_1_CMD__run__BITNR) | \
- (R_EXT_DMA_1_CMD__trf_count__##f8##__VAL(R_EXT_DMA_1_CMD_, trf_count_, v8) << R_EXT_DMA_1_CMD__trf_count__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_1_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_1_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_1_CMD_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_EXT_DMA_1_CMD__cnt__##f1_##_VAL(R_EXT_DMA_1_CMD_, cnt_, v1) << R_EXT_DMA_1_CMD__cnt__BITNR) | \
- (R_EXT_DMA_1_CMD__rqpol__##f2_##_VAL(R_EXT_DMA_1_CMD_, rqpol_, v2) << R_EXT_DMA_1_CMD__rqpol__BITNR) | \
- (R_EXT_DMA_1_CMD__apol__##f3_##_VAL(R_EXT_DMA_1_CMD_, apol_, v3) << R_EXT_DMA_1_CMD__apol__BITNR) | \
- (R_EXT_DMA_1_CMD__rq_ack__##f4_##_VAL(R_EXT_DMA_1_CMD_, rq_ack_, v4) << R_EXT_DMA_1_CMD__rq_ack__BITNR) | \
- (R_EXT_DMA_1_CMD__wid__##f5_##_VAL(R_EXT_DMA_1_CMD_, wid_, v5) << R_EXT_DMA_1_CMD__wid__BITNR) | \
- (R_EXT_DMA_1_CMD__dir__##f6_##_VAL(R_EXT_DMA_1_CMD_, dir_, v6) << R_EXT_DMA_1_CMD__dir__BITNR) | \
- (R_EXT_DMA_1_CMD__run__##f7_##_VAL(R_EXT_DMA_1_CMD_, run_, v7) << R_EXT_DMA_1_CMD__run__BITNR) | \
- (R_EXT_DMA_1_CMD__trf_count__##f8_##_VAL(R_EXT_DMA_1_CMD_, trf_count_, v8) << R_EXT_DMA_1_CMD__trf_count__BITNR) \
-)
-
-#endif
-
-/*
- * R_EXT_DMA_1_STAT
- * - type: RO
- * - addr: 0xb0000018
- * - group: External DMA registers
- */
-
-#if USE_GROUP__External_DMA_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_EXT_DMA_1_STAT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_EXT_DMA_1_STAT(f1,v1,f2,v2) ( \
- (R_EXT_DMA_1_STAT__run__##f1##__MASK & REG__##v1) | \
- (R_EXT_DMA_1_STAT__trf_count__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_1_STAT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_1_STAT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_1_STAT(f1,v1,f2,v2) ( \
- (R_EXT_DMA_1_STAT__run__##f1##__VAL(R_EXT_DMA_1_STAT_, run_, v1) << R_EXT_DMA_1_STAT__run__BITNR) | \
- (R_EXT_DMA_1_STAT__trf_count__##f2##__VAL(R_EXT_DMA_1_STAT_, trf_count_, v2) << R_EXT_DMA_1_STAT__trf_count__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_EXT_DMA_1_STAT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_EXT_DMA_1_STAT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_EXT_DMA_1_STAT_(f1_,v1,f2_,v2) ( \
- (R_EXT_DMA_1_STAT__run__##f1_##_VAL(R_EXT_DMA_1_STAT_, run_, v1) << R_EXT_DMA_1_STAT__run__BITNR) | \
- (R_EXT_DMA_1_STAT__trf_count__##f2_##_VAL(R_EXT_DMA_1_STAT_, trf_count_, v2) << R_EXT_DMA_1_STAT__trf_count__BITNR) \
-)
-
-#endif
-
-/*
- * R_GEN_CONFIG
- * - type: WO
- * - addr: 0xb000002c
- * - group: General config registers
- */
-
-#if USE_GROUP__General_config_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_GEN_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_GEN_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_GEN_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_GEN_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- *R_GEN_CONFIG__SADDR = ( \
- REG_INITIATED(R_GEN_CONFIG_) \
- REG_VAL__R_GEN_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25) \
- ), \
- R_GEN_CONFIG__WRITE(R_GEN_CONFIG__ADDR, *R_GEN_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_GEN_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_GEN_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_GEN_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_GEN_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- *R_GEN_CONFIG__SADDR = ( \
- REG_INITIATED(R_GEN_CONFIG_) \
- REG_VAL__R_GEN_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_GEN_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_GEN_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_GEN_CONFIG__par_w__##f1##__MASK & REG__##v1) | \
- (R_GEN_CONFIG__usb2__##f2##__MASK & REG__##v2) | \
- (R_GEN_CONFIG__usb1__##f3##__MASK & REG__##v3) | \
- (R_GEN_CONFIG__g24dir__##f4##__MASK & REG__##v4) | \
- (R_GEN_CONFIG__g16_23dir__##f5##__MASK & REG__##v5) | \
- (R_GEN_CONFIG__g8_15dir__##f6##__MASK & REG__##v6) | \
- (R_GEN_CONFIG__g0dir__##f7##__MASK & REG__##v7) | \
- (R_GEN_CONFIG__dma9__##f8##__MASK & REG__##v8) | \
- (R_GEN_CONFIG__dma8__##f9##__MASK & REG__##v9) | \
- (R_GEN_CONFIG__dma7__##f10##__MASK & REG__##v10) | \
- (R_GEN_CONFIG__dma6__##f11##__MASK & REG__##v11) | \
- (R_GEN_CONFIG__dma5__##f12##__MASK & REG__##v12) | \
- (R_GEN_CONFIG__dma4__##f13##__MASK & REG__##v13) | \
- (R_GEN_CONFIG__dma3__##f14##__MASK & REG__##v14) | \
- (R_GEN_CONFIG__dma2__##f15##__MASK & REG__##v15) | \
- (R_GEN_CONFIG__mio_w__##f16##__MASK & REG__##v16) | \
- (R_GEN_CONFIG__ser3__##f17##__MASK & REG__##v17) | \
- (R_GEN_CONFIG__par1__##f18##__MASK & REG__##v18) | \
- (R_GEN_CONFIG__scsi0w__##f19##__MASK & REG__##v19) | \
- (R_GEN_CONFIG__scsi1__##f20##__MASK & REG__##v20) | \
- (R_GEN_CONFIG__mio__##f21##__MASK & REG__##v21) | \
- (R_GEN_CONFIG__ser2__##f22##__MASK & REG__##v22) | \
- (R_GEN_CONFIG__par0__##f23##__MASK & REG__##v23) | \
- (R_GEN_CONFIG__ata__##f24##__MASK & REG__##v24) | \
- (R_GEN_CONFIG__scsi0__##f25##__MASK & REG__##v25) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_GEN_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_GEN_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_GEN_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_GEN_CONFIG__par_w__##f1##__VAL(R_GEN_CONFIG_, par_w_, v1) << R_GEN_CONFIG__par_w__BITNR) | \
- (R_GEN_CONFIG__usb2__##f2##__VAL(R_GEN_CONFIG_, usb2_, v2) << R_GEN_CONFIG__usb2__BITNR) | \
- (R_GEN_CONFIG__usb1__##f3##__VAL(R_GEN_CONFIG_, usb1_, v3) << R_GEN_CONFIG__usb1__BITNR) | \
- (R_GEN_CONFIG__g24dir__##f4##__VAL(R_GEN_CONFIG_, g24dir_, v4) << R_GEN_CONFIG__g24dir__BITNR) | \
- (R_GEN_CONFIG__g16_23dir__##f5##__VAL(R_GEN_CONFIG_, g16_23dir_, v5) << R_GEN_CONFIG__g16_23dir__BITNR) | \
- (R_GEN_CONFIG__g8_15dir__##f6##__VAL(R_GEN_CONFIG_, g8_15dir_, v6) << R_GEN_CONFIG__g8_15dir__BITNR) | \
- (R_GEN_CONFIG__g0dir__##f7##__VAL(R_GEN_CONFIG_, g0dir_, v7) << R_GEN_CONFIG__g0dir__BITNR) | \
- (R_GEN_CONFIG__dma9__##f8##__VAL(R_GEN_CONFIG_, dma9_, v8) << R_GEN_CONFIG__dma9__BITNR) | \
- (R_GEN_CONFIG__dma8__##f9##__VAL(R_GEN_CONFIG_, dma8_, v9) << R_GEN_CONFIG__dma8__BITNR) | \
- (R_GEN_CONFIG__dma7__##f10##__VAL(R_GEN_CONFIG_, dma7_, v10) << R_GEN_CONFIG__dma7__BITNR) | \
- (R_GEN_CONFIG__dma6__##f11##__VAL(R_GEN_CONFIG_, dma6_, v11) << R_GEN_CONFIG__dma6__BITNR) | \
- (R_GEN_CONFIG__dma5__##f12##__VAL(R_GEN_CONFIG_, dma5_, v12) << R_GEN_CONFIG__dma5__BITNR) | \
- (R_GEN_CONFIG__dma4__##f13##__VAL(R_GEN_CONFIG_, dma4_, v13) << R_GEN_CONFIG__dma4__BITNR) | \
- (R_GEN_CONFIG__dma3__##f14##__VAL(R_GEN_CONFIG_, dma3_, v14) << R_GEN_CONFIG__dma3__BITNR) | \
- (R_GEN_CONFIG__dma2__##f15##__VAL(R_GEN_CONFIG_, dma2_, v15) << R_GEN_CONFIG__dma2__BITNR) | \
- (R_GEN_CONFIG__mio_w__##f16##__VAL(R_GEN_CONFIG_, mio_w_, v16) << R_GEN_CONFIG__mio_w__BITNR) | \
- (R_GEN_CONFIG__ser3__##f17##__VAL(R_GEN_CONFIG_, ser3_, v17) << R_GEN_CONFIG__ser3__BITNR) | \
- (R_GEN_CONFIG__par1__##f18##__VAL(R_GEN_CONFIG_, par1_, v18) << R_GEN_CONFIG__par1__BITNR) | \
- (R_GEN_CONFIG__scsi0w__##f19##__VAL(R_GEN_CONFIG_, scsi0w_, v19) << R_GEN_CONFIG__scsi0w__BITNR) | \
- (R_GEN_CONFIG__scsi1__##f20##__VAL(R_GEN_CONFIG_, scsi1_, v20) << R_GEN_CONFIG__scsi1__BITNR) | \
- (R_GEN_CONFIG__mio__##f21##__VAL(R_GEN_CONFIG_, mio_, v21) << R_GEN_CONFIG__mio__BITNR) | \
- (R_GEN_CONFIG__ser2__##f22##__VAL(R_GEN_CONFIG_, ser2_, v22) << R_GEN_CONFIG__ser2__BITNR) | \
- (R_GEN_CONFIG__par0__##f23##__VAL(R_GEN_CONFIG_, par0_, v23) << R_GEN_CONFIG__par0__BITNR) | \
- (R_GEN_CONFIG__ata__##f24##__VAL(R_GEN_CONFIG_, ata_, v24) << R_GEN_CONFIG__ata__BITNR) | \
- (R_GEN_CONFIG__scsi0__##f25##__VAL(R_GEN_CONFIG_, scsi0_, v25) << R_GEN_CONFIG__scsi0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_GEN_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_GEN_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_GEN_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25) ( \
- (R_GEN_CONFIG__par_w__##f1_##_VAL(R_GEN_CONFIG_, par_w_, v1) << R_GEN_CONFIG__par_w__BITNR) | \
- (R_GEN_CONFIG__usb2__##f2_##_VAL(R_GEN_CONFIG_, usb2_, v2) << R_GEN_CONFIG__usb2__BITNR) | \
- (R_GEN_CONFIG__usb1__##f3_##_VAL(R_GEN_CONFIG_, usb1_, v3) << R_GEN_CONFIG__usb1__BITNR) | \
- (R_GEN_CONFIG__g24dir__##f4_##_VAL(R_GEN_CONFIG_, g24dir_, v4) << R_GEN_CONFIG__g24dir__BITNR) | \
- (R_GEN_CONFIG__g16_23dir__##f5_##_VAL(R_GEN_CONFIG_, g16_23dir_, v5) << R_GEN_CONFIG__g16_23dir__BITNR) | \
- (R_GEN_CONFIG__g8_15dir__##f6_##_VAL(R_GEN_CONFIG_, g8_15dir_, v6) << R_GEN_CONFIG__g8_15dir__BITNR) | \
- (R_GEN_CONFIG__g0dir__##f7_##_VAL(R_GEN_CONFIG_, g0dir_, v7) << R_GEN_CONFIG__g0dir__BITNR) | \
- (R_GEN_CONFIG__dma9__##f8_##_VAL(R_GEN_CONFIG_, dma9_, v8) << R_GEN_CONFIG__dma9__BITNR) | \
- (R_GEN_CONFIG__dma8__##f9_##_VAL(R_GEN_CONFIG_, dma8_, v9) << R_GEN_CONFIG__dma8__BITNR) | \
- (R_GEN_CONFIG__dma7__##f10_##_VAL(R_GEN_CONFIG_, dma7_, v10) << R_GEN_CONFIG__dma7__BITNR) | \
- (R_GEN_CONFIG__dma6__##f11_##_VAL(R_GEN_CONFIG_, dma6_, v11) << R_GEN_CONFIG__dma6__BITNR) | \
- (R_GEN_CONFIG__dma5__##f12_##_VAL(R_GEN_CONFIG_, dma5_, v12) << R_GEN_CONFIG__dma5__BITNR) | \
- (R_GEN_CONFIG__dma4__##f13_##_VAL(R_GEN_CONFIG_, dma4_, v13) << R_GEN_CONFIG__dma4__BITNR) | \
- (R_GEN_CONFIG__dma3__##f14_##_VAL(R_GEN_CONFIG_, dma3_, v14) << R_GEN_CONFIG__dma3__BITNR) | \
- (R_GEN_CONFIG__dma2__##f15_##_VAL(R_GEN_CONFIG_, dma2_, v15) << R_GEN_CONFIG__dma2__BITNR) | \
- (R_GEN_CONFIG__mio_w__##f16_##_VAL(R_GEN_CONFIG_, mio_w_, v16) << R_GEN_CONFIG__mio_w__BITNR) | \
- (R_GEN_CONFIG__ser3__##f17_##_VAL(R_GEN_CONFIG_, ser3_, v17) << R_GEN_CONFIG__ser3__BITNR) | \
- (R_GEN_CONFIG__par1__##f18_##_VAL(R_GEN_CONFIG_, par1_, v18) << R_GEN_CONFIG__par1__BITNR) | \
- (R_GEN_CONFIG__scsi0w__##f19_##_VAL(R_GEN_CONFIG_, scsi0w_, v19) << R_GEN_CONFIG__scsi0w__BITNR) | \
- (R_GEN_CONFIG__scsi1__##f20_##_VAL(R_GEN_CONFIG_, scsi1_, v20) << R_GEN_CONFIG__scsi1__BITNR) | \
- (R_GEN_CONFIG__mio__##f21_##_VAL(R_GEN_CONFIG_, mio_, v21) << R_GEN_CONFIG__mio__BITNR) | \
- (R_GEN_CONFIG__ser2__##f22_##_VAL(R_GEN_CONFIG_, ser2_, v22) << R_GEN_CONFIG__ser2__BITNR) | \
- (R_GEN_CONFIG__par0__##f23_##_VAL(R_GEN_CONFIG_, par0_, v23) << R_GEN_CONFIG__par0__BITNR) | \
- (R_GEN_CONFIG__ata__##f24_##_VAL(R_GEN_CONFIG_, ata_, v24) << R_GEN_CONFIG__ata__BITNR) | \
- (R_GEN_CONFIG__scsi0__##f25_##_VAL(R_GEN_CONFIG_, scsi0_, v25) << R_GEN_CONFIG__scsi0__BITNR) \
-)
-
-#endif
-
-/*
- * R_GEN_CONFIG_II
- * - type: WO
- * - addr: 0xb0000034
- * - group: General config registers
- */
-
-#if USE_GROUP__General_config_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_GEN_CONFIG_II
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_GEN_CONFIG_II.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_GEN_CONFIG_II.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_GEN_CONFIG_II(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- *R_GEN_CONFIG_II__SADDR = ( \
- REG_INITIATED(R_GEN_CONFIG_II_) \
- REG_VAL__R_GEN_CONFIG_II_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5) \
- ), \
- R_GEN_CONFIG_II__WRITE(R_GEN_CONFIG_II__ADDR, *R_GEN_CONFIG_II__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_GEN_CONFIG_II__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_GEN_CONFIG_II.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_GEN_CONFIG_II.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_GEN_CONFIG_II__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- *R_GEN_CONFIG_II__SADDR = ( \
- REG_INITIATED(R_GEN_CONFIG_II_) \
- REG_VAL__R_GEN_CONFIG_II_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_GEN_CONFIG_II
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_GEN_CONFIG_II(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_GEN_CONFIG_II__sermode3__##f1##__MASK & REG__##v1) | \
- (R_GEN_CONFIG_II__sermode1__##f2##__MASK & REG__##v2) | \
- (R_GEN_CONFIG_II__ext_clk__##f3##__MASK & REG__##v3) | \
- (R_GEN_CONFIG_II__ser3__##f4##__MASK & REG__##v4) | \
- (R_GEN_CONFIG_II__ser2__##f5##__MASK & REG__##v5) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_GEN_CONFIG_II
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_GEN_CONFIG_II.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_GEN_CONFIG_II(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_GEN_CONFIG_II__sermode3__##f1##__VAL(R_GEN_CONFIG_II_, sermode3_, v1) << R_GEN_CONFIG_II__sermode3__BITNR) | \
- (R_GEN_CONFIG_II__sermode1__##f2##__VAL(R_GEN_CONFIG_II_, sermode1_, v2) << R_GEN_CONFIG_II__sermode1__BITNR) | \
- (R_GEN_CONFIG_II__ext_clk__##f3##__VAL(R_GEN_CONFIG_II_, ext_clk_, v3) << R_GEN_CONFIG_II__ext_clk__BITNR) | \
- (R_GEN_CONFIG_II__ser3__##f4##__VAL(R_GEN_CONFIG_II_, ser3_, v4) << R_GEN_CONFIG_II__ser3__BITNR) | \
- (R_GEN_CONFIG_II__ser2__##f5##__VAL(R_GEN_CONFIG_II_, ser2_, v5) << R_GEN_CONFIG_II__ser2__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_GEN_CONFIG_II_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_GEN_CONFIG_II.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_GEN_CONFIG_II_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5) ( \
- (R_GEN_CONFIG_II__sermode3__##f1_##_VAL(R_GEN_CONFIG_II_, sermode3_, v1) << R_GEN_CONFIG_II__sermode3__BITNR) | \
- (R_GEN_CONFIG_II__sermode1__##f2_##_VAL(R_GEN_CONFIG_II_, sermode1_, v2) << R_GEN_CONFIG_II__sermode1__BITNR) | \
- (R_GEN_CONFIG_II__ext_clk__##f3_##_VAL(R_GEN_CONFIG_II_, ext_clk_, v3) << R_GEN_CONFIG_II__ext_clk__BITNR) | \
- (R_GEN_CONFIG_II__ser3__##f4_##_VAL(R_GEN_CONFIG_II_, ser3_, v4) << R_GEN_CONFIG_II__ser3__BITNR) | \
- (R_GEN_CONFIG_II__ser2__##f5_##_VAL(R_GEN_CONFIG_II_, ser2_, v5) << R_GEN_CONFIG_II__ser2__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK0_CLR
- * - type: WO
- * - addr: 0xb00000c0
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK0_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK0_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_IRQ_MASK0_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK0_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- *R_IRQ_MASK0_CLR__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK0_CLR_) \
- REG_VAL__R_IRQ_MASK0_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25,f26##_,v26,f27##_,v27,f28##_,v28,f29##_,v29,f30##_,v30,f31##_,v31) \
- ), \
- R_IRQ_MASK0_CLR__WRITE(R_IRQ_MASK0_CLR__ADDR, *R_IRQ_MASK0_CLR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK0_CLR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK0_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_IRQ_MASK0_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK0_CLR__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- *R_IRQ_MASK0_CLR__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK0_CLR_) \
- REG_VAL__R_IRQ_MASK0_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25,f26##_,v26,f27##_,v27,f28##_,v28,f29##_,v29,f30##_,v30,f31##_,v31) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK0_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK0_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- (R_IRQ_MASK0_CLR__nmi_pin__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK0_CLR__watchdog_nmi__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK0_CLR__sqe_test_error__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK0_CLR__carrier_loss__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK0_CLR__deferred__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK0_CLR__late_col__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK0_CLR__multiple_col__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK0_CLR__single_col__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK0_CLR__congestion__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK0_CLR__oversize__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK0_CLR__alignment_error__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK0_CLR__crc_error__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK0_CLR__overrun__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK0_CLR__underrun__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK0_CLR__excessive_col__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK0_CLR__mdio__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK0_CLR__ata_drq3__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK0_CLR__ata_drq2__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK0_CLR__ata_drq1__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK0_CLR__ata_drq0__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK0_CLR__par0_ecp_cmd__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK0_CLR__par0_peri__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK0_CLR__par0_data__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK0_CLR__par0_ready__##f24##__MASK & REG__##v24) | \
- (R_IRQ_MASK0_CLR__ata_dmaend__##f25##__MASK & REG__##v25) | \
- (R_IRQ_MASK0_CLR__irq_ext_vector_nr__##f26##__MASK & REG__##v26) | \
- (R_IRQ_MASK0_CLR__irq_int_vector_nr__##f27##__MASK & REG__##v27) | \
- (R_IRQ_MASK0_CLR__ext_dma1__##f28##__MASK & REG__##v28) | \
- (R_IRQ_MASK0_CLR__ext_dma0__##f29##__MASK & REG__##v29) | \
- (R_IRQ_MASK0_CLR__timer1__##f30##__MASK & REG__##v30) | \
- (R_IRQ_MASK0_CLR__timer0__##f31##__MASK & REG__##v31) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK0_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK0_CLR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK0_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- (R_IRQ_MASK0_CLR__nmi_pin__##f1##__VAL(R_IRQ_MASK0_CLR_, nmi_pin_, v1) << R_IRQ_MASK0_CLR__nmi_pin__BITNR) | \
- (R_IRQ_MASK0_CLR__watchdog_nmi__##f2##__VAL(R_IRQ_MASK0_CLR_, watchdog_nmi_, v2) << R_IRQ_MASK0_CLR__watchdog_nmi__BITNR) | \
- (R_IRQ_MASK0_CLR__sqe_test_error__##f3##__VAL(R_IRQ_MASK0_CLR_, sqe_test_error_, v3) << R_IRQ_MASK0_CLR__sqe_test_error__BITNR) | \
- (R_IRQ_MASK0_CLR__carrier_loss__##f4##__VAL(R_IRQ_MASK0_CLR_, carrier_loss_, v4) << R_IRQ_MASK0_CLR__carrier_loss__BITNR) | \
- (R_IRQ_MASK0_CLR__deferred__##f5##__VAL(R_IRQ_MASK0_CLR_, deferred_, v5) << R_IRQ_MASK0_CLR__deferred__BITNR) | \
- (R_IRQ_MASK0_CLR__late_col__##f6##__VAL(R_IRQ_MASK0_CLR_, late_col_, v6) << R_IRQ_MASK0_CLR__late_col__BITNR) | \
- (R_IRQ_MASK0_CLR__multiple_col__##f7##__VAL(R_IRQ_MASK0_CLR_, multiple_col_, v7) << R_IRQ_MASK0_CLR__multiple_col__BITNR) | \
- (R_IRQ_MASK0_CLR__single_col__##f8##__VAL(R_IRQ_MASK0_CLR_, single_col_, v8) << R_IRQ_MASK0_CLR__single_col__BITNR) | \
- (R_IRQ_MASK0_CLR__congestion__##f9##__VAL(R_IRQ_MASK0_CLR_, congestion_, v9) << R_IRQ_MASK0_CLR__congestion__BITNR) | \
- (R_IRQ_MASK0_CLR__oversize__##f10##__VAL(R_IRQ_MASK0_CLR_, oversize_, v10) << R_IRQ_MASK0_CLR__oversize__BITNR) | \
- (R_IRQ_MASK0_CLR__alignment_error__##f11##__VAL(R_IRQ_MASK0_CLR_, alignment_error_, v11) << R_IRQ_MASK0_CLR__alignment_error__BITNR) | \
- (R_IRQ_MASK0_CLR__crc_error__##f12##__VAL(R_IRQ_MASK0_CLR_, crc_error_, v12) << R_IRQ_MASK0_CLR__crc_error__BITNR) | \
- (R_IRQ_MASK0_CLR__overrun__##f13##__VAL(R_IRQ_MASK0_CLR_, overrun_, v13) << R_IRQ_MASK0_CLR__overrun__BITNR) | \
- (R_IRQ_MASK0_CLR__underrun__##f14##__VAL(R_IRQ_MASK0_CLR_, underrun_, v14) << R_IRQ_MASK0_CLR__underrun__BITNR) | \
- (R_IRQ_MASK0_CLR__excessive_col__##f15##__VAL(R_IRQ_MASK0_CLR_, excessive_col_, v15) << R_IRQ_MASK0_CLR__excessive_col__BITNR) | \
- (R_IRQ_MASK0_CLR__mdio__##f16##__VAL(R_IRQ_MASK0_CLR_, mdio_, v16) << R_IRQ_MASK0_CLR__mdio__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_drq3__##f17##__VAL(R_IRQ_MASK0_CLR_, ata_drq3_, v17) << R_IRQ_MASK0_CLR__ata_drq3__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_drq2__##f18##__VAL(R_IRQ_MASK0_CLR_, ata_drq2_, v18) << R_IRQ_MASK0_CLR__ata_drq2__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_drq1__##f19##__VAL(R_IRQ_MASK0_CLR_, ata_drq1_, v19) << R_IRQ_MASK0_CLR__ata_drq1__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_drq0__##f20##__VAL(R_IRQ_MASK0_CLR_, ata_drq0_, v20) << R_IRQ_MASK0_CLR__ata_drq0__BITNR) | \
- (R_IRQ_MASK0_CLR__par0_ecp_cmd__##f21##__VAL(R_IRQ_MASK0_CLR_, par0_ecp_cmd_, v21) << R_IRQ_MASK0_CLR__par0_ecp_cmd__BITNR) | \
- (R_IRQ_MASK0_CLR__par0_peri__##f22##__VAL(R_IRQ_MASK0_CLR_, par0_peri_, v22) << R_IRQ_MASK0_CLR__par0_peri__BITNR) | \
- (R_IRQ_MASK0_CLR__par0_data__##f23##__VAL(R_IRQ_MASK0_CLR_, par0_data_, v23) << R_IRQ_MASK0_CLR__par0_data__BITNR) | \
- (R_IRQ_MASK0_CLR__par0_ready__##f24##__VAL(R_IRQ_MASK0_CLR_, par0_ready_, v24) << R_IRQ_MASK0_CLR__par0_ready__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_dmaend__##f25##__VAL(R_IRQ_MASK0_CLR_, ata_dmaend_, v25) << R_IRQ_MASK0_CLR__ata_dmaend__BITNR) | \
- (R_IRQ_MASK0_CLR__irq_ext_vector_nr__##f26##__VAL(R_IRQ_MASK0_CLR_, irq_ext_vector_nr_, v26) << R_IRQ_MASK0_CLR__irq_ext_vector_nr__BITNR) | \
- (R_IRQ_MASK0_CLR__irq_int_vector_nr__##f27##__VAL(R_IRQ_MASK0_CLR_, irq_int_vector_nr_, v27) << R_IRQ_MASK0_CLR__irq_int_vector_nr__BITNR) | \
- (R_IRQ_MASK0_CLR__ext_dma1__##f28##__VAL(R_IRQ_MASK0_CLR_, ext_dma1_, v28) << R_IRQ_MASK0_CLR__ext_dma1__BITNR) | \
- (R_IRQ_MASK0_CLR__ext_dma0__##f29##__VAL(R_IRQ_MASK0_CLR_, ext_dma0_, v29) << R_IRQ_MASK0_CLR__ext_dma0__BITNR) | \
- (R_IRQ_MASK0_CLR__timer1__##f30##__VAL(R_IRQ_MASK0_CLR_, timer1_, v30) << R_IRQ_MASK0_CLR__timer1__BITNR) | \
- (R_IRQ_MASK0_CLR__timer0__##f31##__VAL(R_IRQ_MASK0_CLR_, timer0_, v31) << R_IRQ_MASK0_CLR__timer0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK0_CLR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK0_CLR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK0_CLR_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25,f26_,v26,f27_,v27,f28_,v28,f29_,v29,f30_,v30,f31_,v31) ( \
- (R_IRQ_MASK0_CLR__nmi_pin__##f1_##_VAL(R_IRQ_MASK0_CLR_, nmi_pin_, v1) << R_IRQ_MASK0_CLR__nmi_pin__BITNR) | \
- (R_IRQ_MASK0_CLR__watchdog_nmi__##f2_##_VAL(R_IRQ_MASK0_CLR_, watchdog_nmi_, v2) << R_IRQ_MASK0_CLR__watchdog_nmi__BITNR) | \
- (R_IRQ_MASK0_CLR__sqe_test_error__##f3_##_VAL(R_IRQ_MASK0_CLR_, sqe_test_error_, v3) << R_IRQ_MASK0_CLR__sqe_test_error__BITNR) | \
- (R_IRQ_MASK0_CLR__carrier_loss__##f4_##_VAL(R_IRQ_MASK0_CLR_, carrier_loss_, v4) << R_IRQ_MASK0_CLR__carrier_loss__BITNR) | \
- (R_IRQ_MASK0_CLR__deferred__##f5_##_VAL(R_IRQ_MASK0_CLR_, deferred_, v5) << R_IRQ_MASK0_CLR__deferred__BITNR) | \
- (R_IRQ_MASK0_CLR__late_col__##f6_##_VAL(R_IRQ_MASK0_CLR_, late_col_, v6) << R_IRQ_MASK0_CLR__late_col__BITNR) | \
- (R_IRQ_MASK0_CLR__multiple_col__##f7_##_VAL(R_IRQ_MASK0_CLR_, multiple_col_, v7) << R_IRQ_MASK0_CLR__multiple_col__BITNR) | \
- (R_IRQ_MASK0_CLR__single_col__##f8_##_VAL(R_IRQ_MASK0_CLR_, single_col_, v8) << R_IRQ_MASK0_CLR__single_col__BITNR) | \
- (R_IRQ_MASK0_CLR__congestion__##f9_##_VAL(R_IRQ_MASK0_CLR_, congestion_, v9) << R_IRQ_MASK0_CLR__congestion__BITNR) | \
- (R_IRQ_MASK0_CLR__oversize__##f10_##_VAL(R_IRQ_MASK0_CLR_, oversize_, v10) << R_IRQ_MASK0_CLR__oversize__BITNR) | \
- (R_IRQ_MASK0_CLR__alignment_error__##f11_##_VAL(R_IRQ_MASK0_CLR_, alignment_error_, v11) << R_IRQ_MASK0_CLR__alignment_error__BITNR) | \
- (R_IRQ_MASK0_CLR__crc_error__##f12_##_VAL(R_IRQ_MASK0_CLR_, crc_error_, v12) << R_IRQ_MASK0_CLR__crc_error__BITNR) | \
- (R_IRQ_MASK0_CLR__overrun__##f13_##_VAL(R_IRQ_MASK0_CLR_, overrun_, v13) << R_IRQ_MASK0_CLR__overrun__BITNR) | \
- (R_IRQ_MASK0_CLR__underrun__##f14_##_VAL(R_IRQ_MASK0_CLR_, underrun_, v14) << R_IRQ_MASK0_CLR__underrun__BITNR) | \
- (R_IRQ_MASK0_CLR__excessive_col__##f15_##_VAL(R_IRQ_MASK0_CLR_, excessive_col_, v15) << R_IRQ_MASK0_CLR__excessive_col__BITNR) | \
- (R_IRQ_MASK0_CLR__mdio__##f16_##_VAL(R_IRQ_MASK0_CLR_, mdio_, v16) << R_IRQ_MASK0_CLR__mdio__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_drq3__##f17_##_VAL(R_IRQ_MASK0_CLR_, ata_drq3_, v17) << R_IRQ_MASK0_CLR__ata_drq3__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_drq2__##f18_##_VAL(R_IRQ_MASK0_CLR_, ata_drq2_, v18) << R_IRQ_MASK0_CLR__ata_drq2__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_drq1__##f19_##_VAL(R_IRQ_MASK0_CLR_, ata_drq1_, v19) << R_IRQ_MASK0_CLR__ata_drq1__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_drq0__##f20_##_VAL(R_IRQ_MASK0_CLR_, ata_drq0_, v20) << R_IRQ_MASK0_CLR__ata_drq0__BITNR) | \
- (R_IRQ_MASK0_CLR__par0_ecp_cmd__##f21_##_VAL(R_IRQ_MASK0_CLR_, par0_ecp_cmd_, v21) << R_IRQ_MASK0_CLR__par0_ecp_cmd__BITNR) | \
- (R_IRQ_MASK0_CLR__par0_peri__##f22_##_VAL(R_IRQ_MASK0_CLR_, par0_peri_, v22) << R_IRQ_MASK0_CLR__par0_peri__BITNR) | \
- (R_IRQ_MASK0_CLR__par0_data__##f23_##_VAL(R_IRQ_MASK0_CLR_, par0_data_, v23) << R_IRQ_MASK0_CLR__par0_data__BITNR) | \
- (R_IRQ_MASK0_CLR__par0_ready__##f24_##_VAL(R_IRQ_MASK0_CLR_, par0_ready_, v24) << R_IRQ_MASK0_CLR__par0_ready__BITNR) | \
- (R_IRQ_MASK0_CLR__ata_dmaend__##f25_##_VAL(R_IRQ_MASK0_CLR_, ata_dmaend_, v25) << R_IRQ_MASK0_CLR__ata_dmaend__BITNR) | \
- (R_IRQ_MASK0_CLR__irq_ext_vector_nr__##f26_##_VAL(R_IRQ_MASK0_CLR_, irq_ext_vector_nr_, v26) << R_IRQ_MASK0_CLR__irq_ext_vector_nr__BITNR) | \
- (R_IRQ_MASK0_CLR__irq_int_vector_nr__##f27_##_VAL(R_IRQ_MASK0_CLR_, irq_int_vector_nr_, v27) << R_IRQ_MASK0_CLR__irq_int_vector_nr__BITNR) | \
- (R_IRQ_MASK0_CLR__ext_dma1__##f28_##_VAL(R_IRQ_MASK0_CLR_, ext_dma1_, v28) << R_IRQ_MASK0_CLR__ext_dma1__BITNR) | \
- (R_IRQ_MASK0_CLR__ext_dma0__##f29_##_VAL(R_IRQ_MASK0_CLR_, ext_dma0_, v29) << R_IRQ_MASK0_CLR__ext_dma0__BITNR) | \
- (R_IRQ_MASK0_CLR__timer1__##f30_##_VAL(R_IRQ_MASK0_CLR_, timer1_, v30) << R_IRQ_MASK0_CLR__timer1__BITNR) | \
- (R_IRQ_MASK0_CLR__timer0__##f31_##_VAL(R_IRQ_MASK0_CLR_, timer0_, v31) << R_IRQ_MASK0_CLR__timer0__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK0_RD
- * - type: RO
- * - addr: 0xb00000c0
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK0_RD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK0_RD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- (R_IRQ_MASK0_RD__nmi_pin__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK0_RD__watchdog_nmi__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK0_RD__sqe_test_error__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK0_RD__carrier_loss__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK0_RD__deferred__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK0_RD__late_col__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK0_RD__multiple_col__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK0_RD__single_col__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK0_RD__congestion__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK0_RD__oversize__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK0_RD__alignment_error__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK0_RD__crc_error__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK0_RD__overrun__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK0_RD__underrun__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK0_RD__excessive_col__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK0_RD__mdio__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK0_RD__ata_drq3__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK0_RD__ata_drq2__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK0_RD__ata_drq1__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK0_RD__ata_drq0__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK0_RD__par0_ecp_cmd__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK0_RD__par0_peri__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK0_RD__par0_data__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK0_RD__par0_ready__##f24##__MASK & REG__##v24) | \
- (R_IRQ_MASK0_RD__ata_dmaend__##f25##__MASK & REG__##v25) | \
- (R_IRQ_MASK0_RD__irq_ext_vector_nr__##f26##__MASK & REG__##v26) | \
- (R_IRQ_MASK0_RD__irq_int_vector_nr__##f27##__MASK & REG__##v27) | \
- (R_IRQ_MASK0_RD__ext_dma1__##f28##__MASK & REG__##v28) | \
- (R_IRQ_MASK0_RD__ext_dma0__##f29##__MASK & REG__##v29) | \
- (R_IRQ_MASK0_RD__timer1__##f30##__MASK & REG__##v30) | \
- (R_IRQ_MASK0_RD__timer0__##f31##__MASK & REG__##v31) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK0_RD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK0_RD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK0_RD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- (R_IRQ_MASK0_RD__nmi_pin__##f1##__VAL(R_IRQ_MASK0_RD_, nmi_pin_, v1) << R_IRQ_MASK0_RD__nmi_pin__BITNR) | \
- (R_IRQ_MASK0_RD__watchdog_nmi__##f2##__VAL(R_IRQ_MASK0_RD_, watchdog_nmi_, v2) << R_IRQ_MASK0_RD__watchdog_nmi__BITNR) | \
- (R_IRQ_MASK0_RD__sqe_test_error__##f3##__VAL(R_IRQ_MASK0_RD_, sqe_test_error_, v3) << R_IRQ_MASK0_RD__sqe_test_error__BITNR) | \
- (R_IRQ_MASK0_RD__carrier_loss__##f4##__VAL(R_IRQ_MASK0_RD_, carrier_loss_, v4) << R_IRQ_MASK0_RD__carrier_loss__BITNR) | \
- (R_IRQ_MASK0_RD__deferred__##f5##__VAL(R_IRQ_MASK0_RD_, deferred_, v5) << R_IRQ_MASK0_RD__deferred__BITNR) | \
- (R_IRQ_MASK0_RD__late_col__##f6##__VAL(R_IRQ_MASK0_RD_, late_col_, v6) << R_IRQ_MASK0_RD__late_col__BITNR) | \
- (R_IRQ_MASK0_RD__multiple_col__##f7##__VAL(R_IRQ_MASK0_RD_, multiple_col_, v7) << R_IRQ_MASK0_RD__multiple_col__BITNR) | \
- (R_IRQ_MASK0_RD__single_col__##f8##__VAL(R_IRQ_MASK0_RD_, single_col_, v8) << R_IRQ_MASK0_RD__single_col__BITNR) | \
- (R_IRQ_MASK0_RD__congestion__##f9##__VAL(R_IRQ_MASK0_RD_, congestion_, v9) << R_IRQ_MASK0_RD__congestion__BITNR) | \
- (R_IRQ_MASK0_RD__oversize__##f10##__VAL(R_IRQ_MASK0_RD_, oversize_, v10) << R_IRQ_MASK0_RD__oversize__BITNR) | \
- (R_IRQ_MASK0_RD__alignment_error__##f11##__VAL(R_IRQ_MASK0_RD_, alignment_error_, v11) << R_IRQ_MASK0_RD__alignment_error__BITNR) | \
- (R_IRQ_MASK0_RD__crc_error__##f12##__VAL(R_IRQ_MASK0_RD_, crc_error_, v12) << R_IRQ_MASK0_RD__crc_error__BITNR) | \
- (R_IRQ_MASK0_RD__overrun__##f13##__VAL(R_IRQ_MASK0_RD_, overrun_, v13) << R_IRQ_MASK0_RD__overrun__BITNR) | \
- (R_IRQ_MASK0_RD__underrun__##f14##__VAL(R_IRQ_MASK0_RD_, underrun_, v14) << R_IRQ_MASK0_RD__underrun__BITNR) | \
- (R_IRQ_MASK0_RD__excessive_col__##f15##__VAL(R_IRQ_MASK0_RD_, excessive_col_, v15) << R_IRQ_MASK0_RD__excessive_col__BITNR) | \
- (R_IRQ_MASK0_RD__mdio__##f16##__VAL(R_IRQ_MASK0_RD_, mdio_, v16) << R_IRQ_MASK0_RD__mdio__BITNR) | \
- (R_IRQ_MASK0_RD__ata_drq3__##f17##__VAL(R_IRQ_MASK0_RD_, ata_drq3_, v17) << R_IRQ_MASK0_RD__ata_drq3__BITNR) | \
- (R_IRQ_MASK0_RD__ata_drq2__##f18##__VAL(R_IRQ_MASK0_RD_, ata_drq2_, v18) << R_IRQ_MASK0_RD__ata_drq2__BITNR) | \
- (R_IRQ_MASK0_RD__ata_drq1__##f19##__VAL(R_IRQ_MASK0_RD_, ata_drq1_, v19) << R_IRQ_MASK0_RD__ata_drq1__BITNR) | \
- (R_IRQ_MASK0_RD__ata_drq0__##f20##__VAL(R_IRQ_MASK0_RD_, ata_drq0_, v20) << R_IRQ_MASK0_RD__ata_drq0__BITNR) | \
- (R_IRQ_MASK0_RD__par0_ecp_cmd__##f21##__VAL(R_IRQ_MASK0_RD_, par0_ecp_cmd_, v21) << R_IRQ_MASK0_RD__par0_ecp_cmd__BITNR) | \
- (R_IRQ_MASK0_RD__par0_peri__##f22##__VAL(R_IRQ_MASK0_RD_, par0_peri_, v22) << R_IRQ_MASK0_RD__par0_peri__BITNR) | \
- (R_IRQ_MASK0_RD__par0_data__##f23##__VAL(R_IRQ_MASK0_RD_, par0_data_, v23) << R_IRQ_MASK0_RD__par0_data__BITNR) | \
- (R_IRQ_MASK0_RD__par0_ready__##f24##__VAL(R_IRQ_MASK0_RD_, par0_ready_, v24) << R_IRQ_MASK0_RD__par0_ready__BITNR) | \
- (R_IRQ_MASK0_RD__ata_dmaend__##f25##__VAL(R_IRQ_MASK0_RD_, ata_dmaend_, v25) << R_IRQ_MASK0_RD__ata_dmaend__BITNR) | \
- (R_IRQ_MASK0_RD__irq_ext_vector_nr__##f26##__VAL(R_IRQ_MASK0_RD_, irq_ext_vector_nr_, v26) << R_IRQ_MASK0_RD__irq_ext_vector_nr__BITNR) | \
- (R_IRQ_MASK0_RD__irq_int_vector_nr__##f27##__VAL(R_IRQ_MASK0_RD_, irq_int_vector_nr_, v27) << R_IRQ_MASK0_RD__irq_int_vector_nr__BITNR) | \
- (R_IRQ_MASK0_RD__ext_dma1__##f28##__VAL(R_IRQ_MASK0_RD_, ext_dma1_, v28) << R_IRQ_MASK0_RD__ext_dma1__BITNR) | \
- (R_IRQ_MASK0_RD__ext_dma0__##f29##__VAL(R_IRQ_MASK0_RD_, ext_dma0_, v29) << R_IRQ_MASK0_RD__ext_dma0__BITNR) | \
- (R_IRQ_MASK0_RD__timer1__##f30##__VAL(R_IRQ_MASK0_RD_, timer1_, v30) << R_IRQ_MASK0_RD__timer1__BITNR) | \
- (R_IRQ_MASK0_RD__timer0__##f31##__VAL(R_IRQ_MASK0_RD_, timer0_, v31) << R_IRQ_MASK0_RD__timer0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK0_RD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK0_RD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK0_RD_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25,f26_,v26,f27_,v27,f28_,v28,f29_,v29,f30_,v30,f31_,v31) ( \
- (R_IRQ_MASK0_RD__nmi_pin__##f1_##_VAL(R_IRQ_MASK0_RD_, nmi_pin_, v1) << R_IRQ_MASK0_RD__nmi_pin__BITNR) | \
- (R_IRQ_MASK0_RD__watchdog_nmi__##f2_##_VAL(R_IRQ_MASK0_RD_, watchdog_nmi_, v2) << R_IRQ_MASK0_RD__watchdog_nmi__BITNR) | \
- (R_IRQ_MASK0_RD__sqe_test_error__##f3_##_VAL(R_IRQ_MASK0_RD_, sqe_test_error_, v3) << R_IRQ_MASK0_RD__sqe_test_error__BITNR) | \
- (R_IRQ_MASK0_RD__carrier_loss__##f4_##_VAL(R_IRQ_MASK0_RD_, carrier_loss_, v4) << R_IRQ_MASK0_RD__carrier_loss__BITNR) | \
- (R_IRQ_MASK0_RD__deferred__##f5_##_VAL(R_IRQ_MASK0_RD_, deferred_, v5) << R_IRQ_MASK0_RD__deferred__BITNR) | \
- (R_IRQ_MASK0_RD__late_col__##f6_##_VAL(R_IRQ_MASK0_RD_, late_col_, v6) << R_IRQ_MASK0_RD__late_col__BITNR) | \
- (R_IRQ_MASK0_RD__multiple_col__##f7_##_VAL(R_IRQ_MASK0_RD_, multiple_col_, v7) << R_IRQ_MASK0_RD__multiple_col__BITNR) | \
- (R_IRQ_MASK0_RD__single_col__##f8_##_VAL(R_IRQ_MASK0_RD_, single_col_, v8) << R_IRQ_MASK0_RD__single_col__BITNR) | \
- (R_IRQ_MASK0_RD__congestion__##f9_##_VAL(R_IRQ_MASK0_RD_, congestion_, v9) << R_IRQ_MASK0_RD__congestion__BITNR) | \
- (R_IRQ_MASK0_RD__oversize__##f10_##_VAL(R_IRQ_MASK0_RD_, oversize_, v10) << R_IRQ_MASK0_RD__oversize__BITNR) | \
- (R_IRQ_MASK0_RD__alignment_error__##f11_##_VAL(R_IRQ_MASK0_RD_, alignment_error_, v11) << R_IRQ_MASK0_RD__alignment_error__BITNR) | \
- (R_IRQ_MASK0_RD__crc_error__##f12_##_VAL(R_IRQ_MASK0_RD_, crc_error_, v12) << R_IRQ_MASK0_RD__crc_error__BITNR) | \
- (R_IRQ_MASK0_RD__overrun__##f13_##_VAL(R_IRQ_MASK0_RD_, overrun_, v13) << R_IRQ_MASK0_RD__overrun__BITNR) | \
- (R_IRQ_MASK0_RD__underrun__##f14_##_VAL(R_IRQ_MASK0_RD_, underrun_, v14) << R_IRQ_MASK0_RD__underrun__BITNR) | \
- (R_IRQ_MASK0_RD__excessive_col__##f15_##_VAL(R_IRQ_MASK0_RD_, excessive_col_, v15) << R_IRQ_MASK0_RD__excessive_col__BITNR) | \
- (R_IRQ_MASK0_RD__mdio__##f16_##_VAL(R_IRQ_MASK0_RD_, mdio_, v16) << R_IRQ_MASK0_RD__mdio__BITNR) | \
- (R_IRQ_MASK0_RD__ata_drq3__##f17_##_VAL(R_IRQ_MASK0_RD_, ata_drq3_, v17) << R_IRQ_MASK0_RD__ata_drq3__BITNR) | \
- (R_IRQ_MASK0_RD__ata_drq2__##f18_##_VAL(R_IRQ_MASK0_RD_, ata_drq2_, v18) << R_IRQ_MASK0_RD__ata_drq2__BITNR) | \
- (R_IRQ_MASK0_RD__ata_drq1__##f19_##_VAL(R_IRQ_MASK0_RD_, ata_drq1_, v19) << R_IRQ_MASK0_RD__ata_drq1__BITNR) | \
- (R_IRQ_MASK0_RD__ata_drq0__##f20_##_VAL(R_IRQ_MASK0_RD_, ata_drq0_, v20) << R_IRQ_MASK0_RD__ata_drq0__BITNR) | \
- (R_IRQ_MASK0_RD__par0_ecp_cmd__##f21_##_VAL(R_IRQ_MASK0_RD_, par0_ecp_cmd_, v21) << R_IRQ_MASK0_RD__par0_ecp_cmd__BITNR) | \
- (R_IRQ_MASK0_RD__par0_peri__##f22_##_VAL(R_IRQ_MASK0_RD_, par0_peri_, v22) << R_IRQ_MASK0_RD__par0_peri__BITNR) | \
- (R_IRQ_MASK0_RD__par0_data__##f23_##_VAL(R_IRQ_MASK0_RD_, par0_data_, v23) << R_IRQ_MASK0_RD__par0_data__BITNR) | \
- (R_IRQ_MASK0_RD__par0_ready__##f24_##_VAL(R_IRQ_MASK0_RD_, par0_ready_, v24) << R_IRQ_MASK0_RD__par0_ready__BITNR) | \
- (R_IRQ_MASK0_RD__ata_dmaend__##f25_##_VAL(R_IRQ_MASK0_RD_, ata_dmaend_, v25) << R_IRQ_MASK0_RD__ata_dmaend__BITNR) | \
- (R_IRQ_MASK0_RD__irq_ext_vector_nr__##f26_##_VAL(R_IRQ_MASK0_RD_, irq_ext_vector_nr_, v26) << R_IRQ_MASK0_RD__irq_ext_vector_nr__BITNR) | \
- (R_IRQ_MASK0_RD__irq_int_vector_nr__##f27_##_VAL(R_IRQ_MASK0_RD_, irq_int_vector_nr_, v27) << R_IRQ_MASK0_RD__irq_int_vector_nr__BITNR) | \
- (R_IRQ_MASK0_RD__ext_dma1__##f28_##_VAL(R_IRQ_MASK0_RD_, ext_dma1_, v28) << R_IRQ_MASK0_RD__ext_dma1__BITNR) | \
- (R_IRQ_MASK0_RD__ext_dma0__##f29_##_VAL(R_IRQ_MASK0_RD_, ext_dma0_, v29) << R_IRQ_MASK0_RD__ext_dma0__BITNR) | \
- (R_IRQ_MASK0_RD__timer1__##f30_##_VAL(R_IRQ_MASK0_RD_, timer1_, v30) << R_IRQ_MASK0_RD__timer1__BITNR) | \
- (R_IRQ_MASK0_RD__timer0__##f31_##_VAL(R_IRQ_MASK0_RD_, timer0_, v31) << R_IRQ_MASK0_RD__timer0__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK0_SET
- * - type: WO
- * - addr: 0xb00000c4
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK0_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK0_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_IRQ_MASK0_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK0_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- *R_IRQ_MASK0_SET__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK0_SET_) \
- REG_VAL__R_IRQ_MASK0_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25,f26##_,v26,f27##_,v27,f28##_,v28,f29##_,v29,f30##_,v30,f31##_,v31) \
- ), \
- R_IRQ_MASK0_SET__WRITE(R_IRQ_MASK0_SET__ADDR, *R_IRQ_MASK0_SET__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK0_SET__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK0_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_IRQ_MASK0_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK0_SET__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- *R_IRQ_MASK0_SET__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK0_SET_) \
- REG_VAL__R_IRQ_MASK0_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25,f26##_,v26,f27##_,v27,f28##_,v28,f29##_,v29,f30##_,v30,f31##_,v31) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK0_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK0_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- (R_IRQ_MASK0_SET__nmi_pin__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK0_SET__watchdog_nmi__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK0_SET__sqe_test_error__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK0_SET__carrier_loss__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK0_SET__deferred__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK0_SET__late_col__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK0_SET__multiple_col__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK0_SET__single_col__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK0_SET__congestion__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK0_SET__oversize__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK0_SET__alignment_error__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK0_SET__crc_error__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK0_SET__overrun__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK0_SET__underrun__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK0_SET__excessive_col__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK0_SET__mdio__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK0_SET__ata_drq3__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK0_SET__ata_drq2__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK0_SET__ata_drq1__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK0_SET__ata_drq0__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK0_SET__par0_ecp_cmd__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK0_SET__par0_peri__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK0_SET__par0_data__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK0_SET__par0_ready__##f24##__MASK & REG__##v24) | \
- (R_IRQ_MASK0_SET__ata_dmaend__##f25##__MASK & REG__##v25) | \
- (R_IRQ_MASK0_SET__irq_ext_vector_nr__##f26##__MASK & REG__##v26) | \
- (R_IRQ_MASK0_SET__irq_int_vector_nr__##f27##__MASK & REG__##v27) | \
- (R_IRQ_MASK0_SET__ext_dma1__##f28##__MASK & REG__##v28) | \
- (R_IRQ_MASK0_SET__ext_dma0__##f29##__MASK & REG__##v29) | \
- (R_IRQ_MASK0_SET__timer1__##f30##__MASK & REG__##v30) | \
- (R_IRQ_MASK0_SET__timer0__##f31##__MASK & REG__##v31) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK0_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK0_SET.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK0_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- (R_IRQ_MASK0_SET__nmi_pin__##f1##__VAL(R_IRQ_MASK0_SET_, nmi_pin_, v1) << R_IRQ_MASK0_SET__nmi_pin__BITNR) | \
- (R_IRQ_MASK0_SET__watchdog_nmi__##f2##__VAL(R_IRQ_MASK0_SET_, watchdog_nmi_, v2) << R_IRQ_MASK0_SET__watchdog_nmi__BITNR) | \
- (R_IRQ_MASK0_SET__sqe_test_error__##f3##__VAL(R_IRQ_MASK0_SET_, sqe_test_error_, v3) << R_IRQ_MASK0_SET__sqe_test_error__BITNR) | \
- (R_IRQ_MASK0_SET__carrier_loss__##f4##__VAL(R_IRQ_MASK0_SET_, carrier_loss_, v4) << R_IRQ_MASK0_SET__carrier_loss__BITNR) | \
- (R_IRQ_MASK0_SET__deferred__##f5##__VAL(R_IRQ_MASK0_SET_, deferred_, v5) << R_IRQ_MASK0_SET__deferred__BITNR) | \
- (R_IRQ_MASK0_SET__late_col__##f6##__VAL(R_IRQ_MASK0_SET_, late_col_, v6) << R_IRQ_MASK0_SET__late_col__BITNR) | \
- (R_IRQ_MASK0_SET__multiple_col__##f7##__VAL(R_IRQ_MASK0_SET_, multiple_col_, v7) << R_IRQ_MASK0_SET__multiple_col__BITNR) | \
- (R_IRQ_MASK0_SET__single_col__##f8##__VAL(R_IRQ_MASK0_SET_, single_col_, v8) << R_IRQ_MASK0_SET__single_col__BITNR) | \
- (R_IRQ_MASK0_SET__congestion__##f9##__VAL(R_IRQ_MASK0_SET_, congestion_, v9) << R_IRQ_MASK0_SET__congestion__BITNR) | \
- (R_IRQ_MASK0_SET__oversize__##f10##__VAL(R_IRQ_MASK0_SET_, oversize_, v10) << R_IRQ_MASK0_SET__oversize__BITNR) | \
- (R_IRQ_MASK0_SET__alignment_error__##f11##__VAL(R_IRQ_MASK0_SET_, alignment_error_, v11) << R_IRQ_MASK0_SET__alignment_error__BITNR) | \
- (R_IRQ_MASK0_SET__crc_error__##f12##__VAL(R_IRQ_MASK0_SET_, crc_error_, v12) << R_IRQ_MASK0_SET__crc_error__BITNR) | \
- (R_IRQ_MASK0_SET__overrun__##f13##__VAL(R_IRQ_MASK0_SET_, overrun_, v13) << R_IRQ_MASK0_SET__overrun__BITNR) | \
- (R_IRQ_MASK0_SET__underrun__##f14##__VAL(R_IRQ_MASK0_SET_, underrun_, v14) << R_IRQ_MASK0_SET__underrun__BITNR) | \
- (R_IRQ_MASK0_SET__excessive_col__##f15##__VAL(R_IRQ_MASK0_SET_, excessive_col_, v15) << R_IRQ_MASK0_SET__excessive_col__BITNR) | \
- (R_IRQ_MASK0_SET__mdio__##f16##__VAL(R_IRQ_MASK0_SET_, mdio_, v16) << R_IRQ_MASK0_SET__mdio__BITNR) | \
- (R_IRQ_MASK0_SET__ata_drq3__##f17##__VAL(R_IRQ_MASK0_SET_, ata_drq3_, v17) << R_IRQ_MASK0_SET__ata_drq3__BITNR) | \
- (R_IRQ_MASK0_SET__ata_drq2__##f18##__VAL(R_IRQ_MASK0_SET_, ata_drq2_, v18) << R_IRQ_MASK0_SET__ata_drq2__BITNR) | \
- (R_IRQ_MASK0_SET__ata_drq1__##f19##__VAL(R_IRQ_MASK0_SET_, ata_drq1_, v19) << R_IRQ_MASK0_SET__ata_drq1__BITNR) | \
- (R_IRQ_MASK0_SET__ata_drq0__##f20##__VAL(R_IRQ_MASK0_SET_, ata_drq0_, v20) << R_IRQ_MASK0_SET__ata_drq0__BITNR) | \
- (R_IRQ_MASK0_SET__par0_ecp_cmd__##f21##__VAL(R_IRQ_MASK0_SET_, par0_ecp_cmd_, v21) << R_IRQ_MASK0_SET__par0_ecp_cmd__BITNR) | \
- (R_IRQ_MASK0_SET__par0_peri__##f22##__VAL(R_IRQ_MASK0_SET_, par0_peri_, v22) << R_IRQ_MASK0_SET__par0_peri__BITNR) | \
- (R_IRQ_MASK0_SET__par0_data__##f23##__VAL(R_IRQ_MASK0_SET_, par0_data_, v23) << R_IRQ_MASK0_SET__par0_data__BITNR) | \
- (R_IRQ_MASK0_SET__par0_ready__##f24##__VAL(R_IRQ_MASK0_SET_, par0_ready_, v24) << R_IRQ_MASK0_SET__par0_ready__BITNR) | \
- (R_IRQ_MASK0_SET__ata_dmaend__##f25##__VAL(R_IRQ_MASK0_SET_, ata_dmaend_, v25) << R_IRQ_MASK0_SET__ata_dmaend__BITNR) | \
- (R_IRQ_MASK0_SET__irq_ext_vector_nr__##f26##__VAL(R_IRQ_MASK0_SET_, irq_ext_vector_nr_, v26) << R_IRQ_MASK0_SET__irq_ext_vector_nr__BITNR) | \
- (R_IRQ_MASK0_SET__irq_int_vector_nr__##f27##__VAL(R_IRQ_MASK0_SET_, irq_int_vector_nr_, v27) << R_IRQ_MASK0_SET__irq_int_vector_nr__BITNR) | \
- (R_IRQ_MASK0_SET__ext_dma1__##f28##__VAL(R_IRQ_MASK0_SET_, ext_dma1_, v28) << R_IRQ_MASK0_SET__ext_dma1__BITNR) | \
- (R_IRQ_MASK0_SET__ext_dma0__##f29##__VAL(R_IRQ_MASK0_SET_, ext_dma0_, v29) << R_IRQ_MASK0_SET__ext_dma0__BITNR) | \
- (R_IRQ_MASK0_SET__timer1__##f30##__VAL(R_IRQ_MASK0_SET_, timer1_, v30) << R_IRQ_MASK0_SET__timer1__BITNR) | \
- (R_IRQ_MASK0_SET__timer0__##f31##__VAL(R_IRQ_MASK0_SET_, timer0_, v31) << R_IRQ_MASK0_SET__timer0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK0_SET_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK0_SET.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK0_SET_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25,f26_,v26,f27_,v27,f28_,v28,f29_,v29,f30_,v30,f31_,v31) ( \
- (R_IRQ_MASK0_SET__nmi_pin__##f1_##_VAL(R_IRQ_MASK0_SET_, nmi_pin_, v1) << R_IRQ_MASK0_SET__nmi_pin__BITNR) | \
- (R_IRQ_MASK0_SET__watchdog_nmi__##f2_##_VAL(R_IRQ_MASK0_SET_, watchdog_nmi_, v2) << R_IRQ_MASK0_SET__watchdog_nmi__BITNR) | \
- (R_IRQ_MASK0_SET__sqe_test_error__##f3_##_VAL(R_IRQ_MASK0_SET_, sqe_test_error_, v3) << R_IRQ_MASK0_SET__sqe_test_error__BITNR) | \
- (R_IRQ_MASK0_SET__carrier_loss__##f4_##_VAL(R_IRQ_MASK0_SET_, carrier_loss_, v4) << R_IRQ_MASK0_SET__carrier_loss__BITNR) | \
- (R_IRQ_MASK0_SET__deferred__##f5_##_VAL(R_IRQ_MASK0_SET_, deferred_, v5) << R_IRQ_MASK0_SET__deferred__BITNR) | \
- (R_IRQ_MASK0_SET__late_col__##f6_##_VAL(R_IRQ_MASK0_SET_, late_col_, v6) << R_IRQ_MASK0_SET__late_col__BITNR) | \
- (R_IRQ_MASK0_SET__multiple_col__##f7_##_VAL(R_IRQ_MASK0_SET_, multiple_col_, v7) << R_IRQ_MASK0_SET__multiple_col__BITNR) | \
- (R_IRQ_MASK0_SET__single_col__##f8_##_VAL(R_IRQ_MASK0_SET_, single_col_, v8) << R_IRQ_MASK0_SET__single_col__BITNR) | \
- (R_IRQ_MASK0_SET__congestion__##f9_##_VAL(R_IRQ_MASK0_SET_, congestion_, v9) << R_IRQ_MASK0_SET__congestion__BITNR) | \
- (R_IRQ_MASK0_SET__oversize__##f10_##_VAL(R_IRQ_MASK0_SET_, oversize_, v10) << R_IRQ_MASK0_SET__oversize__BITNR) | \
- (R_IRQ_MASK0_SET__alignment_error__##f11_##_VAL(R_IRQ_MASK0_SET_, alignment_error_, v11) << R_IRQ_MASK0_SET__alignment_error__BITNR) | \
- (R_IRQ_MASK0_SET__crc_error__##f12_##_VAL(R_IRQ_MASK0_SET_, crc_error_, v12) << R_IRQ_MASK0_SET__crc_error__BITNR) | \
- (R_IRQ_MASK0_SET__overrun__##f13_##_VAL(R_IRQ_MASK0_SET_, overrun_, v13) << R_IRQ_MASK0_SET__overrun__BITNR) | \
- (R_IRQ_MASK0_SET__underrun__##f14_##_VAL(R_IRQ_MASK0_SET_, underrun_, v14) << R_IRQ_MASK0_SET__underrun__BITNR) | \
- (R_IRQ_MASK0_SET__excessive_col__##f15_##_VAL(R_IRQ_MASK0_SET_, excessive_col_, v15) << R_IRQ_MASK0_SET__excessive_col__BITNR) | \
- (R_IRQ_MASK0_SET__mdio__##f16_##_VAL(R_IRQ_MASK0_SET_, mdio_, v16) << R_IRQ_MASK0_SET__mdio__BITNR) | \
- (R_IRQ_MASK0_SET__ata_drq3__##f17_##_VAL(R_IRQ_MASK0_SET_, ata_drq3_, v17) << R_IRQ_MASK0_SET__ata_drq3__BITNR) | \
- (R_IRQ_MASK0_SET__ata_drq2__##f18_##_VAL(R_IRQ_MASK0_SET_, ata_drq2_, v18) << R_IRQ_MASK0_SET__ata_drq2__BITNR) | \
- (R_IRQ_MASK0_SET__ata_drq1__##f19_##_VAL(R_IRQ_MASK0_SET_, ata_drq1_, v19) << R_IRQ_MASK0_SET__ata_drq1__BITNR) | \
- (R_IRQ_MASK0_SET__ata_drq0__##f20_##_VAL(R_IRQ_MASK0_SET_, ata_drq0_, v20) << R_IRQ_MASK0_SET__ata_drq0__BITNR) | \
- (R_IRQ_MASK0_SET__par0_ecp_cmd__##f21_##_VAL(R_IRQ_MASK0_SET_, par0_ecp_cmd_, v21) << R_IRQ_MASK0_SET__par0_ecp_cmd__BITNR) | \
- (R_IRQ_MASK0_SET__par0_peri__##f22_##_VAL(R_IRQ_MASK0_SET_, par0_peri_, v22) << R_IRQ_MASK0_SET__par0_peri__BITNR) | \
- (R_IRQ_MASK0_SET__par0_data__##f23_##_VAL(R_IRQ_MASK0_SET_, par0_data_, v23) << R_IRQ_MASK0_SET__par0_data__BITNR) | \
- (R_IRQ_MASK0_SET__par0_ready__##f24_##_VAL(R_IRQ_MASK0_SET_, par0_ready_, v24) << R_IRQ_MASK0_SET__par0_ready__BITNR) | \
- (R_IRQ_MASK0_SET__ata_dmaend__##f25_##_VAL(R_IRQ_MASK0_SET_, ata_dmaend_, v25) << R_IRQ_MASK0_SET__ata_dmaend__BITNR) | \
- (R_IRQ_MASK0_SET__irq_ext_vector_nr__##f26_##_VAL(R_IRQ_MASK0_SET_, irq_ext_vector_nr_, v26) << R_IRQ_MASK0_SET__irq_ext_vector_nr__BITNR) | \
- (R_IRQ_MASK0_SET__irq_int_vector_nr__##f27_##_VAL(R_IRQ_MASK0_SET_, irq_int_vector_nr_, v27) << R_IRQ_MASK0_SET__irq_int_vector_nr__BITNR) | \
- (R_IRQ_MASK0_SET__ext_dma1__##f28_##_VAL(R_IRQ_MASK0_SET_, ext_dma1_, v28) << R_IRQ_MASK0_SET__ext_dma1__BITNR) | \
- (R_IRQ_MASK0_SET__ext_dma0__##f29_##_VAL(R_IRQ_MASK0_SET_, ext_dma0_, v29) << R_IRQ_MASK0_SET__ext_dma0__BITNR) | \
- (R_IRQ_MASK0_SET__timer1__##f30_##_VAL(R_IRQ_MASK0_SET_, timer1_, v30) << R_IRQ_MASK0_SET__timer1__BITNR) | \
- (R_IRQ_MASK0_SET__timer0__##f31_##_VAL(R_IRQ_MASK0_SET_, timer0_, v31) << R_IRQ_MASK0_SET__timer0__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK1_CLR
- * - type: WO
- * - addr: 0xb00000c8
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK1_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK1_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_IRQ_MASK1_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK1_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- *R_IRQ_MASK1_CLR__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK1_CLR_) \
- REG_VAL__R_IRQ_MASK1_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25,f26##_,v26,f27##_,v27,f28##_,v28) \
- ), \
- R_IRQ_MASK1_CLR__WRITE(R_IRQ_MASK1_CLR__ADDR, *R_IRQ_MASK1_CLR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK1_CLR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK1_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_IRQ_MASK1_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK1_CLR__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- *R_IRQ_MASK1_CLR__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK1_CLR_) \
- REG_VAL__R_IRQ_MASK1_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25,f26##_,v26,f27##_,v27,f28##_,v28) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK1_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK1_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- (R_IRQ_MASK1_CLR__sw_int7__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK1_CLR__sw_int6__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK1_CLR__sw_int5__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK1_CLR__sw_int4__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK1_CLR__sw_int3__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK1_CLR__sw_int2__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK1_CLR__sw_int1__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK1_CLR__sw_int0__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK1_CLR__par1_ecp_cmd__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK1_CLR__par1_peri__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK1_CLR__par1_data__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK1_CLR__par1_ready__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK1_CLR__ser3_ready__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK1_CLR__ser3_data__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK1_CLR__ser2_ready__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK1_CLR__ser2_data__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK1_CLR__ser1_ready__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK1_CLR__ser1_data__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK1_CLR__ser0_ready__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK1_CLR__ser0_data__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK1_CLR__pa7__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK1_CLR__pa6__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK1_CLR__pa5__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK1_CLR__pa4__##f24##__MASK & REG__##v24) | \
- (R_IRQ_MASK1_CLR__pa3__##f25##__MASK & REG__##v25) | \
- (R_IRQ_MASK1_CLR__pa2__##f26##__MASK & REG__##v26) | \
- (R_IRQ_MASK1_CLR__pa1__##f27##__MASK & REG__##v27) | \
- (R_IRQ_MASK1_CLR__pa0__##f28##__MASK & REG__##v28) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK1_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK1_CLR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK1_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- (R_IRQ_MASK1_CLR__sw_int7__##f1##__VAL(R_IRQ_MASK1_CLR_, sw_int7_, v1) << R_IRQ_MASK1_CLR__sw_int7__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int6__##f2##__VAL(R_IRQ_MASK1_CLR_, sw_int6_, v2) << R_IRQ_MASK1_CLR__sw_int6__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int5__##f3##__VAL(R_IRQ_MASK1_CLR_, sw_int5_, v3) << R_IRQ_MASK1_CLR__sw_int5__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int4__##f4##__VAL(R_IRQ_MASK1_CLR_, sw_int4_, v4) << R_IRQ_MASK1_CLR__sw_int4__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int3__##f5##__VAL(R_IRQ_MASK1_CLR_, sw_int3_, v5) << R_IRQ_MASK1_CLR__sw_int3__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int2__##f6##__VAL(R_IRQ_MASK1_CLR_, sw_int2_, v6) << R_IRQ_MASK1_CLR__sw_int2__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int1__##f7##__VAL(R_IRQ_MASK1_CLR_, sw_int1_, v7) << R_IRQ_MASK1_CLR__sw_int1__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int0__##f8##__VAL(R_IRQ_MASK1_CLR_, sw_int0_, v8) << R_IRQ_MASK1_CLR__sw_int0__BITNR) | \
- (R_IRQ_MASK1_CLR__par1_ecp_cmd__##f9##__VAL(R_IRQ_MASK1_CLR_, par1_ecp_cmd_, v9) << R_IRQ_MASK1_CLR__par1_ecp_cmd__BITNR) | \
- (R_IRQ_MASK1_CLR__par1_peri__##f10##__VAL(R_IRQ_MASK1_CLR_, par1_peri_, v10) << R_IRQ_MASK1_CLR__par1_peri__BITNR) | \
- (R_IRQ_MASK1_CLR__par1_data__##f11##__VAL(R_IRQ_MASK1_CLR_, par1_data_, v11) << R_IRQ_MASK1_CLR__par1_data__BITNR) | \
- (R_IRQ_MASK1_CLR__par1_ready__##f12##__VAL(R_IRQ_MASK1_CLR_, par1_ready_, v12) << R_IRQ_MASK1_CLR__par1_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser3_ready__##f13##__VAL(R_IRQ_MASK1_CLR_, ser3_ready_, v13) << R_IRQ_MASK1_CLR__ser3_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser3_data__##f14##__VAL(R_IRQ_MASK1_CLR_, ser3_data_, v14) << R_IRQ_MASK1_CLR__ser3_data__BITNR) | \
- (R_IRQ_MASK1_CLR__ser2_ready__##f15##__VAL(R_IRQ_MASK1_CLR_, ser2_ready_, v15) << R_IRQ_MASK1_CLR__ser2_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser2_data__##f16##__VAL(R_IRQ_MASK1_CLR_, ser2_data_, v16) << R_IRQ_MASK1_CLR__ser2_data__BITNR) | \
- (R_IRQ_MASK1_CLR__ser1_ready__##f17##__VAL(R_IRQ_MASK1_CLR_, ser1_ready_, v17) << R_IRQ_MASK1_CLR__ser1_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser1_data__##f18##__VAL(R_IRQ_MASK1_CLR_, ser1_data_, v18) << R_IRQ_MASK1_CLR__ser1_data__BITNR) | \
- (R_IRQ_MASK1_CLR__ser0_ready__##f19##__VAL(R_IRQ_MASK1_CLR_, ser0_ready_, v19) << R_IRQ_MASK1_CLR__ser0_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser0_data__##f20##__VAL(R_IRQ_MASK1_CLR_, ser0_data_, v20) << R_IRQ_MASK1_CLR__ser0_data__BITNR) | \
- (R_IRQ_MASK1_CLR__pa7__##f21##__VAL(R_IRQ_MASK1_CLR_, pa7_, v21) << R_IRQ_MASK1_CLR__pa7__BITNR) | \
- (R_IRQ_MASK1_CLR__pa6__##f22##__VAL(R_IRQ_MASK1_CLR_, pa6_, v22) << R_IRQ_MASK1_CLR__pa6__BITNR) | \
- (R_IRQ_MASK1_CLR__pa5__##f23##__VAL(R_IRQ_MASK1_CLR_, pa5_, v23) << R_IRQ_MASK1_CLR__pa5__BITNR) | \
- (R_IRQ_MASK1_CLR__pa4__##f24##__VAL(R_IRQ_MASK1_CLR_, pa4_, v24) << R_IRQ_MASK1_CLR__pa4__BITNR) | \
- (R_IRQ_MASK1_CLR__pa3__##f25##__VAL(R_IRQ_MASK1_CLR_, pa3_, v25) << R_IRQ_MASK1_CLR__pa3__BITNR) | \
- (R_IRQ_MASK1_CLR__pa2__##f26##__VAL(R_IRQ_MASK1_CLR_, pa2_, v26) << R_IRQ_MASK1_CLR__pa2__BITNR) | \
- (R_IRQ_MASK1_CLR__pa1__##f27##__VAL(R_IRQ_MASK1_CLR_, pa1_, v27) << R_IRQ_MASK1_CLR__pa1__BITNR) | \
- (R_IRQ_MASK1_CLR__pa0__##f28##__VAL(R_IRQ_MASK1_CLR_, pa0_, v28) << R_IRQ_MASK1_CLR__pa0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK1_CLR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK1_CLR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK1_CLR_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25,f26_,v26,f27_,v27,f28_,v28) ( \
- (R_IRQ_MASK1_CLR__sw_int7__##f1_##_VAL(R_IRQ_MASK1_CLR_, sw_int7_, v1) << R_IRQ_MASK1_CLR__sw_int7__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int6__##f2_##_VAL(R_IRQ_MASK1_CLR_, sw_int6_, v2) << R_IRQ_MASK1_CLR__sw_int6__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int5__##f3_##_VAL(R_IRQ_MASK1_CLR_, sw_int5_, v3) << R_IRQ_MASK1_CLR__sw_int5__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int4__##f4_##_VAL(R_IRQ_MASK1_CLR_, sw_int4_, v4) << R_IRQ_MASK1_CLR__sw_int4__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int3__##f5_##_VAL(R_IRQ_MASK1_CLR_, sw_int3_, v5) << R_IRQ_MASK1_CLR__sw_int3__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int2__##f6_##_VAL(R_IRQ_MASK1_CLR_, sw_int2_, v6) << R_IRQ_MASK1_CLR__sw_int2__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int1__##f7_##_VAL(R_IRQ_MASK1_CLR_, sw_int1_, v7) << R_IRQ_MASK1_CLR__sw_int1__BITNR) | \
- (R_IRQ_MASK1_CLR__sw_int0__##f8_##_VAL(R_IRQ_MASK1_CLR_, sw_int0_, v8) << R_IRQ_MASK1_CLR__sw_int0__BITNR) | \
- (R_IRQ_MASK1_CLR__par1_ecp_cmd__##f9_##_VAL(R_IRQ_MASK1_CLR_, par1_ecp_cmd_, v9) << R_IRQ_MASK1_CLR__par1_ecp_cmd__BITNR) | \
- (R_IRQ_MASK1_CLR__par1_peri__##f10_##_VAL(R_IRQ_MASK1_CLR_, par1_peri_, v10) << R_IRQ_MASK1_CLR__par1_peri__BITNR) | \
- (R_IRQ_MASK1_CLR__par1_data__##f11_##_VAL(R_IRQ_MASK1_CLR_, par1_data_, v11) << R_IRQ_MASK1_CLR__par1_data__BITNR) | \
- (R_IRQ_MASK1_CLR__par1_ready__##f12_##_VAL(R_IRQ_MASK1_CLR_, par1_ready_, v12) << R_IRQ_MASK1_CLR__par1_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser3_ready__##f13_##_VAL(R_IRQ_MASK1_CLR_, ser3_ready_, v13) << R_IRQ_MASK1_CLR__ser3_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser3_data__##f14_##_VAL(R_IRQ_MASK1_CLR_, ser3_data_, v14) << R_IRQ_MASK1_CLR__ser3_data__BITNR) | \
- (R_IRQ_MASK1_CLR__ser2_ready__##f15_##_VAL(R_IRQ_MASK1_CLR_, ser2_ready_, v15) << R_IRQ_MASK1_CLR__ser2_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser2_data__##f16_##_VAL(R_IRQ_MASK1_CLR_, ser2_data_, v16) << R_IRQ_MASK1_CLR__ser2_data__BITNR) | \
- (R_IRQ_MASK1_CLR__ser1_ready__##f17_##_VAL(R_IRQ_MASK1_CLR_, ser1_ready_, v17) << R_IRQ_MASK1_CLR__ser1_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser1_data__##f18_##_VAL(R_IRQ_MASK1_CLR_, ser1_data_, v18) << R_IRQ_MASK1_CLR__ser1_data__BITNR) | \
- (R_IRQ_MASK1_CLR__ser0_ready__##f19_##_VAL(R_IRQ_MASK1_CLR_, ser0_ready_, v19) << R_IRQ_MASK1_CLR__ser0_ready__BITNR) | \
- (R_IRQ_MASK1_CLR__ser0_data__##f20_##_VAL(R_IRQ_MASK1_CLR_, ser0_data_, v20) << R_IRQ_MASK1_CLR__ser0_data__BITNR) | \
- (R_IRQ_MASK1_CLR__pa7__##f21_##_VAL(R_IRQ_MASK1_CLR_, pa7_, v21) << R_IRQ_MASK1_CLR__pa7__BITNR) | \
- (R_IRQ_MASK1_CLR__pa6__##f22_##_VAL(R_IRQ_MASK1_CLR_, pa6_, v22) << R_IRQ_MASK1_CLR__pa6__BITNR) | \
- (R_IRQ_MASK1_CLR__pa5__##f23_##_VAL(R_IRQ_MASK1_CLR_, pa5_, v23) << R_IRQ_MASK1_CLR__pa5__BITNR) | \
- (R_IRQ_MASK1_CLR__pa4__##f24_##_VAL(R_IRQ_MASK1_CLR_, pa4_, v24) << R_IRQ_MASK1_CLR__pa4__BITNR) | \
- (R_IRQ_MASK1_CLR__pa3__##f25_##_VAL(R_IRQ_MASK1_CLR_, pa3_, v25) << R_IRQ_MASK1_CLR__pa3__BITNR) | \
- (R_IRQ_MASK1_CLR__pa2__##f26_##_VAL(R_IRQ_MASK1_CLR_, pa2_, v26) << R_IRQ_MASK1_CLR__pa2__BITNR) | \
- (R_IRQ_MASK1_CLR__pa1__##f27_##_VAL(R_IRQ_MASK1_CLR_, pa1_, v27) << R_IRQ_MASK1_CLR__pa1__BITNR) | \
- (R_IRQ_MASK1_CLR__pa0__##f28_##_VAL(R_IRQ_MASK1_CLR_, pa0_, v28) << R_IRQ_MASK1_CLR__pa0__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK1_RD
- * - type: RO
- * - addr: 0xb00000c8
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK1_RD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK1_RD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- (R_IRQ_MASK1_RD__sw_int7__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK1_RD__sw_int6__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK1_RD__sw_int5__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK1_RD__sw_int4__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK1_RD__sw_int3__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK1_RD__sw_int2__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK1_RD__sw_int1__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK1_RD__sw_int0__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK1_RD__par1_ecp_cmd__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK1_RD__par1_peri__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK1_RD__par1_data__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK1_RD__par1_ready__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK1_RD__ser3_ready__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK1_RD__ser3_data__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK1_RD__ser2_ready__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK1_RD__ser2_data__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK1_RD__ser1_ready__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK1_RD__ser1_data__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK1_RD__ser0_ready__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK1_RD__ser0_data__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK1_RD__pa7__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK1_RD__pa6__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK1_RD__pa5__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK1_RD__pa4__##f24##__MASK & REG__##v24) | \
- (R_IRQ_MASK1_RD__pa3__##f25##__MASK & REG__##v25) | \
- (R_IRQ_MASK1_RD__pa2__##f26##__MASK & REG__##v26) | \
- (R_IRQ_MASK1_RD__pa1__##f27##__MASK & REG__##v27) | \
- (R_IRQ_MASK1_RD__pa0__##f28##__MASK & REG__##v28) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK1_RD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK1_RD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK1_RD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- (R_IRQ_MASK1_RD__sw_int7__##f1##__VAL(R_IRQ_MASK1_RD_, sw_int7_, v1) << R_IRQ_MASK1_RD__sw_int7__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int6__##f2##__VAL(R_IRQ_MASK1_RD_, sw_int6_, v2) << R_IRQ_MASK1_RD__sw_int6__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int5__##f3##__VAL(R_IRQ_MASK1_RD_, sw_int5_, v3) << R_IRQ_MASK1_RD__sw_int5__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int4__##f4##__VAL(R_IRQ_MASK1_RD_, sw_int4_, v4) << R_IRQ_MASK1_RD__sw_int4__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int3__##f5##__VAL(R_IRQ_MASK1_RD_, sw_int3_, v5) << R_IRQ_MASK1_RD__sw_int3__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int2__##f6##__VAL(R_IRQ_MASK1_RD_, sw_int2_, v6) << R_IRQ_MASK1_RD__sw_int2__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int1__##f7##__VAL(R_IRQ_MASK1_RD_, sw_int1_, v7) << R_IRQ_MASK1_RD__sw_int1__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int0__##f8##__VAL(R_IRQ_MASK1_RD_, sw_int0_, v8) << R_IRQ_MASK1_RD__sw_int0__BITNR) | \
- (R_IRQ_MASK1_RD__par1_ecp_cmd__##f9##__VAL(R_IRQ_MASK1_RD_, par1_ecp_cmd_, v9) << R_IRQ_MASK1_RD__par1_ecp_cmd__BITNR) | \
- (R_IRQ_MASK1_RD__par1_peri__##f10##__VAL(R_IRQ_MASK1_RD_, par1_peri_, v10) << R_IRQ_MASK1_RD__par1_peri__BITNR) | \
- (R_IRQ_MASK1_RD__par1_data__##f11##__VAL(R_IRQ_MASK1_RD_, par1_data_, v11) << R_IRQ_MASK1_RD__par1_data__BITNR) | \
- (R_IRQ_MASK1_RD__par1_ready__##f12##__VAL(R_IRQ_MASK1_RD_, par1_ready_, v12) << R_IRQ_MASK1_RD__par1_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser3_ready__##f13##__VAL(R_IRQ_MASK1_RD_, ser3_ready_, v13) << R_IRQ_MASK1_RD__ser3_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser3_data__##f14##__VAL(R_IRQ_MASK1_RD_, ser3_data_, v14) << R_IRQ_MASK1_RD__ser3_data__BITNR) | \
- (R_IRQ_MASK1_RD__ser2_ready__##f15##__VAL(R_IRQ_MASK1_RD_, ser2_ready_, v15) << R_IRQ_MASK1_RD__ser2_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser2_data__##f16##__VAL(R_IRQ_MASK1_RD_, ser2_data_, v16) << R_IRQ_MASK1_RD__ser2_data__BITNR) | \
- (R_IRQ_MASK1_RD__ser1_ready__##f17##__VAL(R_IRQ_MASK1_RD_, ser1_ready_, v17) << R_IRQ_MASK1_RD__ser1_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser1_data__##f18##__VAL(R_IRQ_MASK1_RD_, ser1_data_, v18) << R_IRQ_MASK1_RD__ser1_data__BITNR) | \
- (R_IRQ_MASK1_RD__ser0_ready__##f19##__VAL(R_IRQ_MASK1_RD_, ser0_ready_, v19) << R_IRQ_MASK1_RD__ser0_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser0_data__##f20##__VAL(R_IRQ_MASK1_RD_, ser0_data_, v20) << R_IRQ_MASK1_RD__ser0_data__BITNR) | \
- (R_IRQ_MASK1_RD__pa7__##f21##__VAL(R_IRQ_MASK1_RD_, pa7_, v21) << R_IRQ_MASK1_RD__pa7__BITNR) | \
- (R_IRQ_MASK1_RD__pa6__##f22##__VAL(R_IRQ_MASK1_RD_, pa6_, v22) << R_IRQ_MASK1_RD__pa6__BITNR) | \
- (R_IRQ_MASK1_RD__pa5__##f23##__VAL(R_IRQ_MASK1_RD_, pa5_, v23) << R_IRQ_MASK1_RD__pa5__BITNR) | \
- (R_IRQ_MASK1_RD__pa4__##f24##__VAL(R_IRQ_MASK1_RD_, pa4_, v24) << R_IRQ_MASK1_RD__pa4__BITNR) | \
- (R_IRQ_MASK1_RD__pa3__##f25##__VAL(R_IRQ_MASK1_RD_, pa3_, v25) << R_IRQ_MASK1_RD__pa3__BITNR) | \
- (R_IRQ_MASK1_RD__pa2__##f26##__VAL(R_IRQ_MASK1_RD_, pa2_, v26) << R_IRQ_MASK1_RD__pa2__BITNR) | \
- (R_IRQ_MASK1_RD__pa1__##f27##__VAL(R_IRQ_MASK1_RD_, pa1_, v27) << R_IRQ_MASK1_RD__pa1__BITNR) | \
- (R_IRQ_MASK1_RD__pa0__##f28##__VAL(R_IRQ_MASK1_RD_, pa0_, v28) << R_IRQ_MASK1_RD__pa0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK1_RD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK1_RD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK1_RD_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25,f26_,v26,f27_,v27,f28_,v28) ( \
- (R_IRQ_MASK1_RD__sw_int7__##f1_##_VAL(R_IRQ_MASK1_RD_, sw_int7_, v1) << R_IRQ_MASK1_RD__sw_int7__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int6__##f2_##_VAL(R_IRQ_MASK1_RD_, sw_int6_, v2) << R_IRQ_MASK1_RD__sw_int6__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int5__##f3_##_VAL(R_IRQ_MASK1_RD_, sw_int5_, v3) << R_IRQ_MASK1_RD__sw_int5__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int4__##f4_##_VAL(R_IRQ_MASK1_RD_, sw_int4_, v4) << R_IRQ_MASK1_RD__sw_int4__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int3__##f5_##_VAL(R_IRQ_MASK1_RD_, sw_int3_, v5) << R_IRQ_MASK1_RD__sw_int3__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int2__##f6_##_VAL(R_IRQ_MASK1_RD_, sw_int2_, v6) << R_IRQ_MASK1_RD__sw_int2__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int1__##f7_##_VAL(R_IRQ_MASK1_RD_, sw_int1_, v7) << R_IRQ_MASK1_RD__sw_int1__BITNR) | \
- (R_IRQ_MASK1_RD__sw_int0__##f8_##_VAL(R_IRQ_MASK1_RD_, sw_int0_, v8) << R_IRQ_MASK1_RD__sw_int0__BITNR) | \
- (R_IRQ_MASK1_RD__par1_ecp_cmd__##f9_##_VAL(R_IRQ_MASK1_RD_, par1_ecp_cmd_, v9) << R_IRQ_MASK1_RD__par1_ecp_cmd__BITNR) | \
- (R_IRQ_MASK1_RD__par1_peri__##f10_##_VAL(R_IRQ_MASK1_RD_, par1_peri_, v10) << R_IRQ_MASK1_RD__par1_peri__BITNR) | \
- (R_IRQ_MASK1_RD__par1_data__##f11_##_VAL(R_IRQ_MASK1_RD_, par1_data_, v11) << R_IRQ_MASK1_RD__par1_data__BITNR) | \
- (R_IRQ_MASK1_RD__par1_ready__##f12_##_VAL(R_IRQ_MASK1_RD_, par1_ready_, v12) << R_IRQ_MASK1_RD__par1_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser3_ready__##f13_##_VAL(R_IRQ_MASK1_RD_, ser3_ready_, v13) << R_IRQ_MASK1_RD__ser3_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser3_data__##f14_##_VAL(R_IRQ_MASK1_RD_, ser3_data_, v14) << R_IRQ_MASK1_RD__ser3_data__BITNR) | \
- (R_IRQ_MASK1_RD__ser2_ready__##f15_##_VAL(R_IRQ_MASK1_RD_, ser2_ready_, v15) << R_IRQ_MASK1_RD__ser2_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser2_data__##f16_##_VAL(R_IRQ_MASK1_RD_, ser2_data_, v16) << R_IRQ_MASK1_RD__ser2_data__BITNR) | \
- (R_IRQ_MASK1_RD__ser1_ready__##f17_##_VAL(R_IRQ_MASK1_RD_, ser1_ready_, v17) << R_IRQ_MASK1_RD__ser1_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser1_data__##f18_##_VAL(R_IRQ_MASK1_RD_, ser1_data_, v18) << R_IRQ_MASK1_RD__ser1_data__BITNR) | \
- (R_IRQ_MASK1_RD__ser0_ready__##f19_##_VAL(R_IRQ_MASK1_RD_, ser0_ready_, v19) << R_IRQ_MASK1_RD__ser0_ready__BITNR) | \
- (R_IRQ_MASK1_RD__ser0_data__##f20_##_VAL(R_IRQ_MASK1_RD_, ser0_data_, v20) << R_IRQ_MASK1_RD__ser0_data__BITNR) | \
- (R_IRQ_MASK1_RD__pa7__##f21_##_VAL(R_IRQ_MASK1_RD_, pa7_, v21) << R_IRQ_MASK1_RD__pa7__BITNR) | \
- (R_IRQ_MASK1_RD__pa6__##f22_##_VAL(R_IRQ_MASK1_RD_, pa6_, v22) << R_IRQ_MASK1_RD__pa6__BITNR) | \
- (R_IRQ_MASK1_RD__pa5__##f23_##_VAL(R_IRQ_MASK1_RD_, pa5_, v23) << R_IRQ_MASK1_RD__pa5__BITNR) | \
- (R_IRQ_MASK1_RD__pa4__##f24_##_VAL(R_IRQ_MASK1_RD_, pa4_, v24) << R_IRQ_MASK1_RD__pa4__BITNR) | \
- (R_IRQ_MASK1_RD__pa3__##f25_##_VAL(R_IRQ_MASK1_RD_, pa3_, v25) << R_IRQ_MASK1_RD__pa3__BITNR) | \
- (R_IRQ_MASK1_RD__pa2__##f26_##_VAL(R_IRQ_MASK1_RD_, pa2_, v26) << R_IRQ_MASK1_RD__pa2__BITNR) | \
- (R_IRQ_MASK1_RD__pa1__##f27_##_VAL(R_IRQ_MASK1_RD_, pa1_, v27) << R_IRQ_MASK1_RD__pa1__BITNR) | \
- (R_IRQ_MASK1_RD__pa0__##f28_##_VAL(R_IRQ_MASK1_RD_, pa0_, v28) << R_IRQ_MASK1_RD__pa0__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK1_SET
- * - type: WO
- * - addr: 0xb00000cc
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK1_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK1_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_IRQ_MASK1_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK1_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- *R_IRQ_MASK1_SET__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK1_SET_) \
- REG_VAL__R_IRQ_MASK1_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25,f26##_,v26,f27##_,v27,f28##_,v28) \
- ), \
- R_IRQ_MASK1_SET__WRITE(R_IRQ_MASK1_SET__ADDR, *R_IRQ_MASK1_SET__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK1_SET__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK1_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_IRQ_MASK1_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK1_SET__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- *R_IRQ_MASK1_SET__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK1_SET_) \
- REG_VAL__R_IRQ_MASK1_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25,f26##_,v26,f27##_,v27,f28##_,v28) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK1_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK1_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- (R_IRQ_MASK1_SET__sw_int7__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK1_SET__sw_int6__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK1_SET__sw_int5__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK1_SET__sw_int4__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK1_SET__sw_int3__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK1_SET__sw_int2__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK1_SET__sw_int1__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK1_SET__sw_int0__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK1_SET__par1_ecp_cmd__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK1_SET__par1_peri__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK1_SET__par1_data__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK1_SET__par1_ready__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK1_SET__ser3_ready__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK1_SET__ser3_data__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK1_SET__ser2_ready__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK1_SET__ser2_data__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK1_SET__ser1_ready__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK1_SET__ser1_data__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK1_SET__ser0_ready__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK1_SET__ser0_data__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK1_SET__pa7__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK1_SET__pa6__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK1_SET__pa5__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK1_SET__pa4__##f24##__MASK & REG__##v24) | \
- (R_IRQ_MASK1_SET__pa3__##f25##__MASK & REG__##v25) | \
- (R_IRQ_MASK1_SET__pa2__##f26##__MASK & REG__##v26) | \
- (R_IRQ_MASK1_SET__pa1__##f27##__MASK & REG__##v27) | \
- (R_IRQ_MASK1_SET__pa0__##f28##__MASK & REG__##v28) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK1_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK1_SET.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK1_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- (R_IRQ_MASK1_SET__sw_int7__##f1##__VAL(R_IRQ_MASK1_SET_, sw_int7_, v1) << R_IRQ_MASK1_SET__sw_int7__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int6__##f2##__VAL(R_IRQ_MASK1_SET_, sw_int6_, v2) << R_IRQ_MASK1_SET__sw_int6__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int5__##f3##__VAL(R_IRQ_MASK1_SET_, sw_int5_, v3) << R_IRQ_MASK1_SET__sw_int5__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int4__##f4##__VAL(R_IRQ_MASK1_SET_, sw_int4_, v4) << R_IRQ_MASK1_SET__sw_int4__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int3__##f5##__VAL(R_IRQ_MASK1_SET_, sw_int3_, v5) << R_IRQ_MASK1_SET__sw_int3__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int2__##f6##__VAL(R_IRQ_MASK1_SET_, sw_int2_, v6) << R_IRQ_MASK1_SET__sw_int2__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int1__##f7##__VAL(R_IRQ_MASK1_SET_, sw_int1_, v7) << R_IRQ_MASK1_SET__sw_int1__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int0__##f8##__VAL(R_IRQ_MASK1_SET_, sw_int0_, v8) << R_IRQ_MASK1_SET__sw_int0__BITNR) | \
- (R_IRQ_MASK1_SET__par1_ecp_cmd__##f9##__VAL(R_IRQ_MASK1_SET_, par1_ecp_cmd_, v9) << R_IRQ_MASK1_SET__par1_ecp_cmd__BITNR) | \
- (R_IRQ_MASK1_SET__par1_peri__##f10##__VAL(R_IRQ_MASK1_SET_, par1_peri_, v10) << R_IRQ_MASK1_SET__par1_peri__BITNR) | \
- (R_IRQ_MASK1_SET__par1_data__##f11##__VAL(R_IRQ_MASK1_SET_, par1_data_, v11) << R_IRQ_MASK1_SET__par1_data__BITNR) | \
- (R_IRQ_MASK1_SET__par1_ready__##f12##__VAL(R_IRQ_MASK1_SET_, par1_ready_, v12) << R_IRQ_MASK1_SET__par1_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser3_ready__##f13##__VAL(R_IRQ_MASK1_SET_, ser3_ready_, v13) << R_IRQ_MASK1_SET__ser3_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser3_data__##f14##__VAL(R_IRQ_MASK1_SET_, ser3_data_, v14) << R_IRQ_MASK1_SET__ser3_data__BITNR) | \
- (R_IRQ_MASK1_SET__ser2_ready__##f15##__VAL(R_IRQ_MASK1_SET_, ser2_ready_, v15) << R_IRQ_MASK1_SET__ser2_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser2_data__##f16##__VAL(R_IRQ_MASK1_SET_, ser2_data_, v16) << R_IRQ_MASK1_SET__ser2_data__BITNR) | \
- (R_IRQ_MASK1_SET__ser1_ready__##f17##__VAL(R_IRQ_MASK1_SET_, ser1_ready_, v17) << R_IRQ_MASK1_SET__ser1_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser1_data__##f18##__VAL(R_IRQ_MASK1_SET_, ser1_data_, v18) << R_IRQ_MASK1_SET__ser1_data__BITNR) | \
- (R_IRQ_MASK1_SET__ser0_ready__##f19##__VAL(R_IRQ_MASK1_SET_, ser0_ready_, v19) << R_IRQ_MASK1_SET__ser0_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser0_data__##f20##__VAL(R_IRQ_MASK1_SET_, ser0_data_, v20) << R_IRQ_MASK1_SET__ser0_data__BITNR) | \
- (R_IRQ_MASK1_SET__pa7__##f21##__VAL(R_IRQ_MASK1_SET_, pa7_, v21) << R_IRQ_MASK1_SET__pa7__BITNR) | \
- (R_IRQ_MASK1_SET__pa6__##f22##__VAL(R_IRQ_MASK1_SET_, pa6_, v22) << R_IRQ_MASK1_SET__pa6__BITNR) | \
- (R_IRQ_MASK1_SET__pa5__##f23##__VAL(R_IRQ_MASK1_SET_, pa5_, v23) << R_IRQ_MASK1_SET__pa5__BITNR) | \
- (R_IRQ_MASK1_SET__pa4__##f24##__VAL(R_IRQ_MASK1_SET_, pa4_, v24) << R_IRQ_MASK1_SET__pa4__BITNR) | \
- (R_IRQ_MASK1_SET__pa3__##f25##__VAL(R_IRQ_MASK1_SET_, pa3_, v25) << R_IRQ_MASK1_SET__pa3__BITNR) | \
- (R_IRQ_MASK1_SET__pa2__##f26##__VAL(R_IRQ_MASK1_SET_, pa2_, v26) << R_IRQ_MASK1_SET__pa2__BITNR) | \
- (R_IRQ_MASK1_SET__pa1__##f27##__VAL(R_IRQ_MASK1_SET_, pa1_, v27) << R_IRQ_MASK1_SET__pa1__BITNR) | \
- (R_IRQ_MASK1_SET__pa0__##f28##__VAL(R_IRQ_MASK1_SET_, pa0_, v28) << R_IRQ_MASK1_SET__pa0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK1_SET_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK1_SET.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK1_SET_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25,f26_,v26,f27_,v27,f28_,v28) ( \
- (R_IRQ_MASK1_SET__sw_int7__##f1_##_VAL(R_IRQ_MASK1_SET_, sw_int7_, v1) << R_IRQ_MASK1_SET__sw_int7__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int6__##f2_##_VAL(R_IRQ_MASK1_SET_, sw_int6_, v2) << R_IRQ_MASK1_SET__sw_int6__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int5__##f3_##_VAL(R_IRQ_MASK1_SET_, sw_int5_, v3) << R_IRQ_MASK1_SET__sw_int5__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int4__##f4_##_VAL(R_IRQ_MASK1_SET_, sw_int4_, v4) << R_IRQ_MASK1_SET__sw_int4__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int3__##f5_##_VAL(R_IRQ_MASK1_SET_, sw_int3_, v5) << R_IRQ_MASK1_SET__sw_int3__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int2__##f6_##_VAL(R_IRQ_MASK1_SET_, sw_int2_, v6) << R_IRQ_MASK1_SET__sw_int2__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int1__##f7_##_VAL(R_IRQ_MASK1_SET_, sw_int1_, v7) << R_IRQ_MASK1_SET__sw_int1__BITNR) | \
- (R_IRQ_MASK1_SET__sw_int0__##f8_##_VAL(R_IRQ_MASK1_SET_, sw_int0_, v8) << R_IRQ_MASK1_SET__sw_int0__BITNR) | \
- (R_IRQ_MASK1_SET__par1_ecp_cmd__##f9_##_VAL(R_IRQ_MASK1_SET_, par1_ecp_cmd_, v9) << R_IRQ_MASK1_SET__par1_ecp_cmd__BITNR) | \
- (R_IRQ_MASK1_SET__par1_peri__##f10_##_VAL(R_IRQ_MASK1_SET_, par1_peri_, v10) << R_IRQ_MASK1_SET__par1_peri__BITNR) | \
- (R_IRQ_MASK1_SET__par1_data__##f11_##_VAL(R_IRQ_MASK1_SET_, par1_data_, v11) << R_IRQ_MASK1_SET__par1_data__BITNR) | \
- (R_IRQ_MASK1_SET__par1_ready__##f12_##_VAL(R_IRQ_MASK1_SET_, par1_ready_, v12) << R_IRQ_MASK1_SET__par1_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser3_ready__##f13_##_VAL(R_IRQ_MASK1_SET_, ser3_ready_, v13) << R_IRQ_MASK1_SET__ser3_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser3_data__##f14_##_VAL(R_IRQ_MASK1_SET_, ser3_data_, v14) << R_IRQ_MASK1_SET__ser3_data__BITNR) | \
- (R_IRQ_MASK1_SET__ser2_ready__##f15_##_VAL(R_IRQ_MASK1_SET_, ser2_ready_, v15) << R_IRQ_MASK1_SET__ser2_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser2_data__##f16_##_VAL(R_IRQ_MASK1_SET_, ser2_data_, v16) << R_IRQ_MASK1_SET__ser2_data__BITNR) | \
- (R_IRQ_MASK1_SET__ser1_ready__##f17_##_VAL(R_IRQ_MASK1_SET_, ser1_ready_, v17) << R_IRQ_MASK1_SET__ser1_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser1_data__##f18_##_VAL(R_IRQ_MASK1_SET_, ser1_data_, v18) << R_IRQ_MASK1_SET__ser1_data__BITNR) | \
- (R_IRQ_MASK1_SET__ser0_ready__##f19_##_VAL(R_IRQ_MASK1_SET_, ser0_ready_, v19) << R_IRQ_MASK1_SET__ser0_ready__BITNR) | \
- (R_IRQ_MASK1_SET__ser0_data__##f20_##_VAL(R_IRQ_MASK1_SET_, ser0_data_, v20) << R_IRQ_MASK1_SET__ser0_data__BITNR) | \
- (R_IRQ_MASK1_SET__pa7__##f21_##_VAL(R_IRQ_MASK1_SET_, pa7_, v21) << R_IRQ_MASK1_SET__pa7__BITNR) | \
- (R_IRQ_MASK1_SET__pa6__##f22_##_VAL(R_IRQ_MASK1_SET_, pa6_, v22) << R_IRQ_MASK1_SET__pa6__BITNR) | \
- (R_IRQ_MASK1_SET__pa5__##f23_##_VAL(R_IRQ_MASK1_SET_, pa5_, v23) << R_IRQ_MASK1_SET__pa5__BITNR) | \
- (R_IRQ_MASK1_SET__pa4__##f24_##_VAL(R_IRQ_MASK1_SET_, pa4_, v24) << R_IRQ_MASK1_SET__pa4__BITNR) | \
- (R_IRQ_MASK1_SET__pa3__##f25_##_VAL(R_IRQ_MASK1_SET_, pa3_, v25) << R_IRQ_MASK1_SET__pa3__BITNR) | \
- (R_IRQ_MASK1_SET__pa2__##f26_##_VAL(R_IRQ_MASK1_SET_, pa2_, v26) << R_IRQ_MASK1_SET__pa2__BITNR) | \
- (R_IRQ_MASK1_SET__pa1__##f27_##_VAL(R_IRQ_MASK1_SET_, pa1_, v27) << R_IRQ_MASK1_SET__pa1__BITNR) | \
- (R_IRQ_MASK1_SET__pa0__##f28_##_VAL(R_IRQ_MASK1_SET_, pa0_, v28) << R_IRQ_MASK1_SET__pa0__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK2_CLR
- * - type: WO
- * - addr: 0xb00000d0
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK2_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK2_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_IRQ_MASK2_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK2_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- *R_IRQ_MASK2_CLR__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK2_CLR_) \
- REG_VAL__R_IRQ_MASK2_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24) \
- ), \
- R_IRQ_MASK2_CLR__WRITE(R_IRQ_MASK2_CLR__ADDR, *R_IRQ_MASK2_CLR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK2_CLR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK2_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_IRQ_MASK2_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK2_CLR__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- *R_IRQ_MASK2_CLR__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK2_CLR_) \
- REG_VAL__R_IRQ_MASK2_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK2_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK2_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- (R_IRQ_MASK2_CLR__dma8_sub3_descr__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK2_CLR__dma8_sub2_descr__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK2_CLR__dma8_sub1_descr__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK2_CLR__dma8_sub0_descr__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK2_CLR__dma9_eop__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK2_CLR__dma9_descr__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK2_CLR__dma8_eop__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK2_CLR__dma8_descr__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK2_CLR__dma7_eop__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK2_CLR__dma7_descr__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK2_CLR__dma6_eop__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK2_CLR__dma6_descr__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK2_CLR__dma5_eop__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK2_CLR__dma5_descr__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK2_CLR__dma4_eop__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK2_CLR__dma4_descr__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK2_CLR__dma3_eop__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK2_CLR__dma3_descr__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK2_CLR__dma2_eop__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK2_CLR__dma2_descr__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK2_CLR__dma1_eop__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK2_CLR__dma1_descr__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK2_CLR__dma0_eop__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK2_CLR__dma0_descr__##f24##__MASK & REG__##v24) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK2_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK2_CLR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK2_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- (R_IRQ_MASK2_CLR__dma8_sub3_descr__##f1##__VAL(R_IRQ_MASK2_CLR_, dma8_sub3_descr_, v1) << R_IRQ_MASK2_CLR__dma8_sub3_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_sub2_descr__##f2##__VAL(R_IRQ_MASK2_CLR_, dma8_sub2_descr_, v2) << R_IRQ_MASK2_CLR__dma8_sub2_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_sub1_descr__##f3##__VAL(R_IRQ_MASK2_CLR_, dma8_sub1_descr_, v3) << R_IRQ_MASK2_CLR__dma8_sub1_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_sub0_descr__##f4##__VAL(R_IRQ_MASK2_CLR_, dma8_sub0_descr_, v4) << R_IRQ_MASK2_CLR__dma8_sub0_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma9_eop__##f5##__VAL(R_IRQ_MASK2_CLR_, dma9_eop_, v5) << R_IRQ_MASK2_CLR__dma9_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma9_descr__##f6##__VAL(R_IRQ_MASK2_CLR_, dma9_descr_, v6) << R_IRQ_MASK2_CLR__dma9_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_eop__##f7##__VAL(R_IRQ_MASK2_CLR_, dma8_eop_, v7) << R_IRQ_MASK2_CLR__dma8_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_descr__##f8##__VAL(R_IRQ_MASK2_CLR_, dma8_descr_, v8) << R_IRQ_MASK2_CLR__dma8_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma7_eop__##f9##__VAL(R_IRQ_MASK2_CLR_, dma7_eop_, v9) << R_IRQ_MASK2_CLR__dma7_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma7_descr__##f10##__VAL(R_IRQ_MASK2_CLR_, dma7_descr_, v10) << R_IRQ_MASK2_CLR__dma7_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma6_eop__##f11##__VAL(R_IRQ_MASK2_CLR_, dma6_eop_, v11) << R_IRQ_MASK2_CLR__dma6_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma6_descr__##f12##__VAL(R_IRQ_MASK2_CLR_, dma6_descr_, v12) << R_IRQ_MASK2_CLR__dma6_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma5_eop__##f13##__VAL(R_IRQ_MASK2_CLR_, dma5_eop_, v13) << R_IRQ_MASK2_CLR__dma5_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma5_descr__##f14##__VAL(R_IRQ_MASK2_CLR_, dma5_descr_, v14) << R_IRQ_MASK2_CLR__dma5_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma4_eop__##f15##__VAL(R_IRQ_MASK2_CLR_, dma4_eop_, v15) << R_IRQ_MASK2_CLR__dma4_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma4_descr__##f16##__VAL(R_IRQ_MASK2_CLR_, dma4_descr_, v16) << R_IRQ_MASK2_CLR__dma4_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma3_eop__##f17##__VAL(R_IRQ_MASK2_CLR_, dma3_eop_, v17) << R_IRQ_MASK2_CLR__dma3_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma3_descr__##f18##__VAL(R_IRQ_MASK2_CLR_, dma3_descr_, v18) << R_IRQ_MASK2_CLR__dma3_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma2_eop__##f19##__VAL(R_IRQ_MASK2_CLR_, dma2_eop_, v19) << R_IRQ_MASK2_CLR__dma2_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma2_descr__##f20##__VAL(R_IRQ_MASK2_CLR_, dma2_descr_, v20) << R_IRQ_MASK2_CLR__dma2_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma1_eop__##f21##__VAL(R_IRQ_MASK2_CLR_, dma1_eop_, v21) << R_IRQ_MASK2_CLR__dma1_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma1_descr__##f22##__VAL(R_IRQ_MASK2_CLR_, dma1_descr_, v22) << R_IRQ_MASK2_CLR__dma1_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma0_eop__##f23##__VAL(R_IRQ_MASK2_CLR_, dma0_eop_, v23) << R_IRQ_MASK2_CLR__dma0_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma0_descr__##f24##__VAL(R_IRQ_MASK2_CLR_, dma0_descr_, v24) << R_IRQ_MASK2_CLR__dma0_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK2_CLR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK2_CLR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK2_CLR_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24) ( \
- (R_IRQ_MASK2_CLR__dma8_sub3_descr__##f1_##_VAL(R_IRQ_MASK2_CLR_, dma8_sub3_descr_, v1) << R_IRQ_MASK2_CLR__dma8_sub3_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_sub2_descr__##f2_##_VAL(R_IRQ_MASK2_CLR_, dma8_sub2_descr_, v2) << R_IRQ_MASK2_CLR__dma8_sub2_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_sub1_descr__##f3_##_VAL(R_IRQ_MASK2_CLR_, dma8_sub1_descr_, v3) << R_IRQ_MASK2_CLR__dma8_sub1_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_sub0_descr__##f4_##_VAL(R_IRQ_MASK2_CLR_, dma8_sub0_descr_, v4) << R_IRQ_MASK2_CLR__dma8_sub0_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma9_eop__##f5_##_VAL(R_IRQ_MASK2_CLR_, dma9_eop_, v5) << R_IRQ_MASK2_CLR__dma9_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma9_descr__##f6_##_VAL(R_IRQ_MASK2_CLR_, dma9_descr_, v6) << R_IRQ_MASK2_CLR__dma9_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_eop__##f7_##_VAL(R_IRQ_MASK2_CLR_, dma8_eop_, v7) << R_IRQ_MASK2_CLR__dma8_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma8_descr__##f8_##_VAL(R_IRQ_MASK2_CLR_, dma8_descr_, v8) << R_IRQ_MASK2_CLR__dma8_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma7_eop__##f9_##_VAL(R_IRQ_MASK2_CLR_, dma7_eop_, v9) << R_IRQ_MASK2_CLR__dma7_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma7_descr__##f10_##_VAL(R_IRQ_MASK2_CLR_, dma7_descr_, v10) << R_IRQ_MASK2_CLR__dma7_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma6_eop__##f11_##_VAL(R_IRQ_MASK2_CLR_, dma6_eop_, v11) << R_IRQ_MASK2_CLR__dma6_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma6_descr__##f12_##_VAL(R_IRQ_MASK2_CLR_, dma6_descr_, v12) << R_IRQ_MASK2_CLR__dma6_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma5_eop__##f13_##_VAL(R_IRQ_MASK2_CLR_, dma5_eop_, v13) << R_IRQ_MASK2_CLR__dma5_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma5_descr__##f14_##_VAL(R_IRQ_MASK2_CLR_, dma5_descr_, v14) << R_IRQ_MASK2_CLR__dma5_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma4_eop__##f15_##_VAL(R_IRQ_MASK2_CLR_, dma4_eop_, v15) << R_IRQ_MASK2_CLR__dma4_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma4_descr__##f16_##_VAL(R_IRQ_MASK2_CLR_, dma4_descr_, v16) << R_IRQ_MASK2_CLR__dma4_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma3_eop__##f17_##_VAL(R_IRQ_MASK2_CLR_, dma3_eop_, v17) << R_IRQ_MASK2_CLR__dma3_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma3_descr__##f18_##_VAL(R_IRQ_MASK2_CLR_, dma3_descr_, v18) << R_IRQ_MASK2_CLR__dma3_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma2_eop__##f19_##_VAL(R_IRQ_MASK2_CLR_, dma2_eop_, v19) << R_IRQ_MASK2_CLR__dma2_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma2_descr__##f20_##_VAL(R_IRQ_MASK2_CLR_, dma2_descr_, v20) << R_IRQ_MASK2_CLR__dma2_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma1_eop__##f21_##_VAL(R_IRQ_MASK2_CLR_, dma1_eop_, v21) << R_IRQ_MASK2_CLR__dma1_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma1_descr__##f22_##_VAL(R_IRQ_MASK2_CLR_, dma1_descr_, v22) << R_IRQ_MASK2_CLR__dma1_descr__BITNR) | \
- (R_IRQ_MASK2_CLR__dma0_eop__##f23_##_VAL(R_IRQ_MASK2_CLR_, dma0_eop_, v23) << R_IRQ_MASK2_CLR__dma0_eop__BITNR) | \
- (R_IRQ_MASK2_CLR__dma0_descr__##f24_##_VAL(R_IRQ_MASK2_CLR_, dma0_descr_, v24) << R_IRQ_MASK2_CLR__dma0_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK2_RD
- * - type: RO
- * - addr: 0xb00000d0
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK2_RD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK2_RD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- (R_IRQ_MASK2_RD__dma8_sub3_descr__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK2_RD__dma8_sub2_descr__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK2_RD__dma8_sub1_descr__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK2_RD__dma8_sub0_descr__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK2_RD__dma9_eop__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK2_RD__dma9_descr__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK2_RD__dma8_eop__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK2_RD__dma8_descr__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK2_RD__dma7_eop__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK2_RD__dma7_descr__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK2_RD__dma6_eop__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK2_RD__dma6_descr__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK2_RD__dma5_eop__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK2_RD__dma5_descr__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK2_RD__dma4_eop__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK2_RD__dma4_descr__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK2_RD__dma3_eop__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK2_RD__dma3_descr__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK2_RD__dma2_eop__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK2_RD__dma2_descr__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK2_RD__dma1_eop__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK2_RD__dma1_descr__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK2_RD__dma0_eop__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK2_RD__dma0_descr__##f24##__MASK & REG__##v24) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK2_RD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK2_RD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK2_RD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- (R_IRQ_MASK2_RD__dma8_sub3_descr__##f1##__VAL(R_IRQ_MASK2_RD_, dma8_sub3_descr_, v1) << R_IRQ_MASK2_RD__dma8_sub3_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_sub2_descr__##f2##__VAL(R_IRQ_MASK2_RD_, dma8_sub2_descr_, v2) << R_IRQ_MASK2_RD__dma8_sub2_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_sub1_descr__##f3##__VAL(R_IRQ_MASK2_RD_, dma8_sub1_descr_, v3) << R_IRQ_MASK2_RD__dma8_sub1_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_sub0_descr__##f4##__VAL(R_IRQ_MASK2_RD_, dma8_sub0_descr_, v4) << R_IRQ_MASK2_RD__dma8_sub0_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma9_eop__##f5##__VAL(R_IRQ_MASK2_RD_, dma9_eop_, v5) << R_IRQ_MASK2_RD__dma9_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma9_descr__##f6##__VAL(R_IRQ_MASK2_RD_, dma9_descr_, v6) << R_IRQ_MASK2_RD__dma9_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_eop__##f7##__VAL(R_IRQ_MASK2_RD_, dma8_eop_, v7) << R_IRQ_MASK2_RD__dma8_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_descr__##f8##__VAL(R_IRQ_MASK2_RD_, dma8_descr_, v8) << R_IRQ_MASK2_RD__dma8_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma7_eop__##f9##__VAL(R_IRQ_MASK2_RD_, dma7_eop_, v9) << R_IRQ_MASK2_RD__dma7_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma7_descr__##f10##__VAL(R_IRQ_MASK2_RD_, dma7_descr_, v10) << R_IRQ_MASK2_RD__dma7_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma6_eop__##f11##__VAL(R_IRQ_MASK2_RD_, dma6_eop_, v11) << R_IRQ_MASK2_RD__dma6_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma6_descr__##f12##__VAL(R_IRQ_MASK2_RD_, dma6_descr_, v12) << R_IRQ_MASK2_RD__dma6_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma5_eop__##f13##__VAL(R_IRQ_MASK2_RD_, dma5_eop_, v13) << R_IRQ_MASK2_RD__dma5_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma5_descr__##f14##__VAL(R_IRQ_MASK2_RD_, dma5_descr_, v14) << R_IRQ_MASK2_RD__dma5_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma4_eop__##f15##__VAL(R_IRQ_MASK2_RD_, dma4_eop_, v15) << R_IRQ_MASK2_RD__dma4_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma4_descr__##f16##__VAL(R_IRQ_MASK2_RD_, dma4_descr_, v16) << R_IRQ_MASK2_RD__dma4_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma3_eop__##f17##__VAL(R_IRQ_MASK2_RD_, dma3_eop_, v17) << R_IRQ_MASK2_RD__dma3_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma3_descr__##f18##__VAL(R_IRQ_MASK2_RD_, dma3_descr_, v18) << R_IRQ_MASK2_RD__dma3_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma2_eop__##f19##__VAL(R_IRQ_MASK2_RD_, dma2_eop_, v19) << R_IRQ_MASK2_RD__dma2_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma2_descr__##f20##__VAL(R_IRQ_MASK2_RD_, dma2_descr_, v20) << R_IRQ_MASK2_RD__dma2_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma1_eop__##f21##__VAL(R_IRQ_MASK2_RD_, dma1_eop_, v21) << R_IRQ_MASK2_RD__dma1_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma1_descr__##f22##__VAL(R_IRQ_MASK2_RD_, dma1_descr_, v22) << R_IRQ_MASK2_RD__dma1_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma0_eop__##f23##__VAL(R_IRQ_MASK2_RD_, dma0_eop_, v23) << R_IRQ_MASK2_RD__dma0_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma0_descr__##f24##__VAL(R_IRQ_MASK2_RD_, dma0_descr_, v24) << R_IRQ_MASK2_RD__dma0_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK2_RD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK2_RD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK2_RD_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24) ( \
- (R_IRQ_MASK2_RD__dma8_sub3_descr__##f1_##_VAL(R_IRQ_MASK2_RD_, dma8_sub3_descr_, v1) << R_IRQ_MASK2_RD__dma8_sub3_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_sub2_descr__##f2_##_VAL(R_IRQ_MASK2_RD_, dma8_sub2_descr_, v2) << R_IRQ_MASK2_RD__dma8_sub2_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_sub1_descr__##f3_##_VAL(R_IRQ_MASK2_RD_, dma8_sub1_descr_, v3) << R_IRQ_MASK2_RD__dma8_sub1_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_sub0_descr__##f4_##_VAL(R_IRQ_MASK2_RD_, dma8_sub0_descr_, v4) << R_IRQ_MASK2_RD__dma8_sub0_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma9_eop__##f5_##_VAL(R_IRQ_MASK2_RD_, dma9_eop_, v5) << R_IRQ_MASK2_RD__dma9_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma9_descr__##f6_##_VAL(R_IRQ_MASK2_RD_, dma9_descr_, v6) << R_IRQ_MASK2_RD__dma9_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_eop__##f7_##_VAL(R_IRQ_MASK2_RD_, dma8_eop_, v7) << R_IRQ_MASK2_RD__dma8_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma8_descr__##f8_##_VAL(R_IRQ_MASK2_RD_, dma8_descr_, v8) << R_IRQ_MASK2_RD__dma8_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma7_eop__##f9_##_VAL(R_IRQ_MASK2_RD_, dma7_eop_, v9) << R_IRQ_MASK2_RD__dma7_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma7_descr__##f10_##_VAL(R_IRQ_MASK2_RD_, dma7_descr_, v10) << R_IRQ_MASK2_RD__dma7_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma6_eop__##f11_##_VAL(R_IRQ_MASK2_RD_, dma6_eop_, v11) << R_IRQ_MASK2_RD__dma6_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma6_descr__##f12_##_VAL(R_IRQ_MASK2_RD_, dma6_descr_, v12) << R_IRQ_MASK2_RD__dma6_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma5_eop__##f13_##_VAL(R_IRQ_MASK2_RD_, dma5_eop_, v13) << R_IRQ_MASK2_RD__dma5_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma5_descr__##f14_##_VAL(R_IRQ_MASK2_RD_, dma5_descr_, v14) << R_IRQ_MASK2_RD__dma5_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma4_eop__##f15_##_VAL(R_IRQ_MASK2_RD_, dma4_eop_, v15) << R_IRQ_MASK2_RD__dma4_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma4_descr__##f16_##_VAL(R_IRQ_MASK2_RD_, dma4_descr_, v16) << R_IRQ_MASK2_RD__dma4_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma3_eop__##f17_##_VAL(R_IRQ_MASK2_RD_, dma3_eop_, v17) << R_IRQ_MASK2_RD__dma3_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma3_descr__##f18_##_VAL(R_IRQ_MASK2_RD_, dma3_descr_, v18) << R_IRQ_MASK2_RD__dma3_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma2_eop__##f19_##_VAL(R_IRQ_MASK2_RD_, dma2_eop_, v19) << R_IRQ_MASK2_RD__dma2_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma2_descr__##f20_##_VAL(R_IRQ_MASK2_RD_, dma2_descr_, v20) << R_IRQ_MASK2_RD__dma2_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma1_eop__##f21_##_VAL(R_IRQ_MASK2_RD_, dma1_eop_, v21) << R_IRQ_MASK2_RD__dma1_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma1_descr__##f22_##_VAL(R_IRQ_MASK2_RD_, dma1_descr_, v22) << R_IRQ_MASK2_RD__dma1_descr__BITNR) | \
- (R_IRQ_MASK2_RD__dma0_eop__##f23_##_VAL(R_IRQ_MASK2_RD_, dma0_eop_, v23) << R_IRQ_MASK2_RD__dma0_eop__BITNR) | \
- (R_IRQ_MASK2_RD__dma0_descr__##f24_##_VAL(R_IRQ_MASK2_RD_, dma0_descr_, v24) << R_IRQ_MASK2_RD__dma0_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_MASK2_SET
- * - type: WO
- * - addr: 0xb00000d4
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK2_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK2_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_IRQ_MASK2_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK2_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- *R_IRQ_MASK2_SET__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK2_SET_) \
- REG_VAL__R_IRQ_MASK2_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24) \
- ), \
- R_IRQ_MASK2_SET__WRITE(R_IRQ_MASK2_SET__ADDR, *R_IRQ_MASK2_SET__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_IRQ_MASK2_SET__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_IRQ_MASK2_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_IRQ_MASK2_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_IRQ_MASK2_SET__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- *R_IRQ_MASK2_SET__SADDR = ( \
- REG_INITIATED(R_IRQ_MASK2_SET_) \
- REG_VAL__R_IRQ_MASK2_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_MASK2_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_MASK2_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- (R_IRQ_MASK2_SET__dma8_sub3_descr__##f1##__MASK & REG__##v1) | \
- (R_IRQ_MASK2_SET__dma8_sub2_descr__##f2##__MASK & REG__##v2) | \
- (R_IRQ_MASK2_SET__dma8_sub1_descr__##f3##__MASK & REG__##v3) | \
- (R_IRQ_MASK2_SET__dma8_sub0_descr__##f4##__MASK & REG__##v4) | \
- (R_IRQ_MASK2_SET__dma9_eop__##f5##__MASK & REG__##v5) | \
- (R_IRQ_MASK2_SET__dma9_descr__##f6##__MASK & REG__##v6) | \
- (R_IRQ_MASK2_SET__dma8_eop__##f7##__MASK & REG__##v7) | \
- (R_IRQ_MASK2_SET__dma8_descr__##f8##__MASK & REG__##v8) | \
- (R_IRQ_MASK2_SET__dma7_eop__##f9##__MASK & REG__##v9) | \
- (R_IRQ_MASK2_SET__dma7_descr__##f10##__MASK & REG__##v10) | \
- (R_IRQ_MASK2_SET__dma6_eop__##f11##__MASK & REG__##v11) | \
- (R_IRQ_MASK2_SET__dma6_descr__##f12##__MASK & REG__##v12) | \
- (R_IRQ_MASK2_SET__dma5_eop__##f13##__MASK & REG__##v13) | \
- (R_IRQ_MASK2_SET__dma5_descr__##f14##__MASK & REG__##v14) | \
- (R_IRQ_MASK2_SET__dma4_eop__##f15##__MASK & REG__##v15) | \
- (R_IRQ_MASK2_SET__dma4_descr__##f16##__MASK & REG__##v16) | \
- (R_IRQ_MASK2_SET__dma3_eop__##f17##__MASK & REG__##v17) | \
- (R_IRQ_MASK2_SET__dma3_descr__##f18##__MASK & REG__##v18) | \
- (R_IRQ_MASK2_SET__dma2_eop__##f19##__MASK & REG__##v19) | \
- (R_IRQ_MASK2_SET__dma2_descr__##f20##__MASK & REG__##v20) | \
- (R_IRQ_MASK2_SET__dma1_eop__##f21##__MASK & REG__##v21) | \
- (R_IRQ_MASK2_SET__dma1_descr__##f22##__MASK & REG__##v22) | \
- (R_IRQ_MASK2_SET__dma0_eop__##f23##__MASK & REG__##v23) | \
- (R_IRQ_MASK2_SET__dma0_descr__##f24##__MASK & REG__##v24) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK2_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK2_SET.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK2_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- (R_IRQ_MASK2_SET__dma8_sub3_descr__##f1##__VAL(R_IRQ_MASK2_SET_, dma8_sub3_descr_, v1) << R_IRQ_MASK2_SET__dma8_sub3_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_sub2_descr__##f2##__VAL(R_IRQ_MASK2_SET_, dma8_sub2_descr_, v2) << R_IRQ_MASK2_SET__dma8_sub2_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_sub1_descr__##f3##__VAL(R_IRQ_MASK2_SET_, dma8_sub1_descr_, v3) << R_IRQ_MASK2_SET__dma8_sub1_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_sub0_descr__##f4##__VAL(R_IRQ_MASK2_SET_, dma8_sub0_descr_, v4) << R_IRQ_MASK2_SET__dma8_sub0_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma9_eop__##f5##__VAL(R_IRQ_MASK2_SET_, dma9_eop_, v5) << R_IRQ_MASK2_SET__dma9_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma9_descr__##f6##__VAL(R_IRQ_MASK2_SET_, dma9_descr_, v6) << R_IRQ_MASK2_SET__dma9_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_eop__##f7##__VAL(R_IRQ_MASK2_SET_, dma8_eop_, v7) << R_IRQ_MASK2_SET__dma8_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_descr__##f8##__VAL(R_IRQ_MASK2_SET_, dma8_descr_, v8) << R_IRQ_MASK2_SET__dma8_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma7_eop__##f9##__VAL(R_IRQ_MASK2_SET_, dma7_eop_, v9) << R_IRQ_MASK2_SET__dma7_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma7_descr__##f10##__VAL(R_IRQ_MASK2_SET_, dma7_descr_, v10) << R_IRQ_MASK2_SET__dma7_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma6_eop__##f11##__VAL(R_IRQ_MASK2_SET_, dma6_eop_, v11) << R_IRQ_MASK2_SET__dma6_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma6_descr__##f12##__VAL(R_IRQ_MASK2_SET_, dma6_descr_, v12) << R_IRQ_MASK2_SET__dma6_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma5_eop__##f13##__VAL(R_IRQ_MASK2_SET_, dma5_eop_, v13) << R_IRQ_MASK2_SET__dma5_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma5_descr__##f14##__VAL(R_IRQ_MASK2_SET_, dma5_descr_, v14) << R_IRQ_MASK2_SET__dma5_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma4_eop__##f15##__VAL(R_IRQ_MASK2_SET_, dma4_eop_, v15) << R_IRQ_MASK2_SET__dma4_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma4_descr__##f16##__VAL(R_IRQ_MASK2_SET_, dma4_descr_, v16) << R_IRQ_MASK2_SET__dma4_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma3_eop__##f17##__VAL(R_IRQ_MASK2_SET_, dma3_eop_, v17) << R_IRQ_MASK2_SET__dma3_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma3_descr__##f18##__VAL(R_IRQ_MASK2_SET_, dma3_descr_, v18) << R_IRQ_MASK2_SET__dma3_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma2_eop__##f19##__VAL(R_IRQ_MASK2_SET_, dma2_eop_, v19) << R_IRQ_MASK2_SET__dma2_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma2_descr__##f20##__VAL(R_IRQ_MASK2_SET_, dma2_descr_, v20) << R_IRQ_MASK2_SET__dma2_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma1_eop__##f21##__VAL(R_IRQ_MASK2_SET_, dma1_eop_, v21) << R_IRQ_MASK2_SET__dma1_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma1_descr__##f22##__VAL(R_IRQ_MASK2_SET_, dma1_descr_, v22) << R_IRQ_MASK2_SET__dma1_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma0_eop__##f23##__VAL(R_IRQ_MASK2_SET_, dma0_eop_, v23) << R_IRQ_MASK2_SET__dma0_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma0_descr__##f24##__VAL(R_IRQ_MASK2_SET_, dma0_descr_, v24) << R_IRQ_MASK2_SET__dma0_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_MASK2_SET_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_MASK2_SET.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_MASK2_SET_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24) ( \
- (R_IRQ_MASK2_SET__dma8_sub3_descr__##f1_##_VAL(R_IRQ_MASK2_SET_, dma8_sub3_descr_, v1) << R_IRQ_MASK2_SET__dma8_sub3_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_sub2_descr__##f2_##_VAL(R_IRQ_MASK2_SET_, dma8_sub2_descr_, v2) << R_IRQ_MASK2_SET__dma8_sub2_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_sub1_descr__##f3_##_VAL(R_IRQ_MASK2_SET_, dma8_sub1_descr_, v3) << R_IRQ_MASK2_SET__dma8_sub1_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_sub0_descr__##f4_##_VAL(R_IRQ_MASK2_SET_, dma8_sub0_descr_, v4) << R_IRQ_MASK2_SET__dma8_sub0_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma9_eop__##f5_##_VAL(R_IRQ_MASK2_SET_, dma9_eop_, v5) << R_IRQ_MASK2_SET__dma9_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma9_descr__##f6_##_VAL(R_IRQ_MASK2_SET_, dma9_descr_, v6) << R_IRQ_MASK2_SET__dma9_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_eop__##f7_##_VAL(R_IRQ_MASK2_SET_, dma8_eop_, v7) << R_IRQ_MASK2_SET__dma8_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma8_descr__##f8_##_VAL(R_IRQ_MASK2_SET_, dma8_descr_, v8) << R_IRQ_MASK2_SET__dma8_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma7_eop__##f9_##_VAL(R_IRQ_MASK2_SET_, dma7_eop_, v9) << R_IRQ_MASK2_SET__dma7_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma7_descr__##f10_##_VAL(R_IRQ_MASK2_SET_, dma7_descr_, v10) << R_IRQ_MASK2_SET__dma7_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma6_eop__##f11_##_VAL(R_IRQ_MASK2_SET_, dma6_eop_, v11) << R_IRQ_MASK2_SET__dma6_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma6_descr__##f12_##_VAL(R_IRQ_MASK2_SET_, dma6_descr_, v12) << R_IRQ_MASK2_SET__dma6_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma5_eop__##f13_##_VAL(R_IRQ_MASK2_SET_, dma5_eop_, v13) << R_IRQ_MASK2_SET__dma5_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma5_descr__##f14_##_VAL(R_IRQ_MASK2_SET_, dma5_descr_, v14) << R_IRQ_MASK2_SET__dma5_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma4_eop__##f15_##_VAL(R_IRQ_MASK2_SET_, dma4_eop_, v15) << R_IRQ_MASK2_SET__dma4_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma4_descr__##f16_##_VAL(R_IRQ_MASK2_SET_, dma4_descr_, v16) << R_IRQ_MASK2_SET__dma4_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma3_eop__##f17_##_VAL(R_IRQ_MASK2_SET_, dma3_eop_, v17) << R_IRQ_MASK2_SET__dma3_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma3_descr__##f18_##_VAL(R_IRQ_MASK2_SET_, dma3_descr_, v18) << R_IRQ_MASK2_SET__dma3_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma2_eop__##f19_##_VAL(R_IRQ_MASK2_SET_, dma2_eop_, v19) << R_IRQ_MASK2_SET__dma2_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma2_descr__##f20_##_VAL(R_IRQ_MASK2_SET_, dma2_descr_, v20) << R_IRQ_MASK2_SET__dma2_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma1_eop__##f21_##_VAL(R_IRQ_MASK2_SET_, dma1_eop_, v21) << R_IRQ_MASK2_SET__dma1_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma1_descr__##f22_##_VAL(R_IRQ_MASK2_SET_, dma1_descr_, v22) << R_IRQ_MASK2_SET__dma1_descr__BITNR) | \
- (R_IRQ_MASK2_SET__dma0_eop__##f23_##_VAL(R_IRQ_MASK2_SET_, dma0_eop_, v23) << R_IRQ_MASK2_SET__dma0_eop__BITNR) | \
- (R_IRQ_MASK2_SET__dma0_descr__##f24_##_VAL(R_IRQ_MASK2_SET_, dma0_descr_, v24) << R_IRQ_MASK2_SET__dma0_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_READ0
- * - type: RO
- * - addr: 0xb00000c4
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_READ0
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_READ0(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- (R_IRQ_READ0__nmi_pin__##f1##__MASK & REG__##v1) | \
- (R_IRQ_READ0__watchdog_nmi__##f2##__MASK & REG__##v2) | \
- (R_IRQ_READ0__sqe_test_error__##f3##__MASK & REG__##v3) | \
- (R_IRQ_READ0__carrier_loss__##f4##__MASK & REG__##v4) | \
- (R_IRQ_READ0__deferred__##f5##__MASK & REG__##v5) | \
- (R_IRQ_READ0__late_col__##f6##__MASK & REG__##v6) | \
- (R_IRQ_READ0__multiple_col__##f7##__MASK & REG__##v7) | \
- (R_IRQ_READ0__single_col__##f8##__MASK & REG__##v8) | \
- (R_IRQ_READ0__congestion__##f9##__MASK & REG__##v9) | \
- (R_IRQ_READ0__oversize__##f10##__MASK & REG__##v10) | \
- (R_IRQ_READ0__alignment_error__##f11##__MASK & REG__##v11) | \
- (R_IRQ_READ0__crc_error__##f12##__MASK & REG__##v12) | \
- (R_IRQ_READ0__overrun__##f13##__MASK & REG__##v13) | \
- (R_IRQ_READ0__underrun__##f14##__MASK & REG__##v14) | \
- (R_IRQ_READ0__excessive_col__##f15##__MASK & REG__##v15) | \
- (R_IRQ_READ0__mdio__##f16##__MASK & REG__##v16) | \
- (R_IRQ_READ0__ata_drq3__##f17##__MASK & REG__##v17) | \
- (R_IRQ_READ0__ata_drq2__##f18##__MASK & REG__##v18) | \
- (R_IRQ_READ0__ata_drq1__##f19##__MASK & REG__##v19) | \
- (R_IRQ_READ0__ata_drq0__##f20##__MASK & REG__##v20) | \
- (R_IRQ_READ0__par0_ecp_cmd__##f21##__MASK & REG__##v21) | \
- (R_IRQ_READ0__par0_peri__##f22##__MASK & REG__##v22) | \
- (R_IRQ_READ0__par0_data__##f23##__MASK & REG__##v23) | \
- (R_IRQ_READ0__par0_ready__##f24##__MASK & REG__##v24) | \
- (R_IRQ_READ0__ata_dmaend__##f25##__MASK & REG__##v25) | \
- (R_IRQ_READ0__irq_ext_vector_nr__##f26##__MASK & REG__##v26) | \
- (R_IRQ_READ0__irq_int_vector_nr__##f27##__MASK & REG__##v27) | \
- (R_IRQ_READ0__ext_dma1__##f28##__MASK & REG__##v28) | \
- (R_IRQ_READ0__ext_dma0__##f29##__MASK & REG__##v29) | \
- (R_IRQ_READ0__timer1__##f30##__MASK & REG__##v30) | \
- (R_IRQ_READ0__timer0__##f31##__MASK & REG__##v31) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_READ0
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_READ0.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_READ0(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28,f29,v29,f30,v30,f31,v31) ( \
- (R_IRQ_READ0__nmi_pin__##f1##__VAL(R_IRQ_READ0_, nmi_pin_, v1) << R_IRQ_READ0__nmi_pin__BITNR) | \
- (R_IRQ_READ0__watchdog_nmi__##f2##__VAL(R_IRQ_READ0_, watchdog_nmi_, v2) << R_IRQ_READ0__watchdog_nmi__BITNR) | \
- (R_IRQ_READ0__sqe_test_error__##f3##__VAL(R_IRQ_READ0_, sqe_test_error_, v3) << R_IRQ_READ0__sqe_test_error__BITNR) | \
- (R_IRQ_READ0__carrier_loss__##f4##__VAL(R_IRQ_READ0_, carrier_loss_, v4) << R_IRQ_READ0__carrier_loss__BITNR) | \
- (R_IRQ_READ0__deferred__##f5##__VAL(R_IRQ_READ0_, deferred_, v5) << R_IRQ_READ0__deferred__BITNR) | \
- (R_IRQ_READ0__late_col__##f6##__VAL(R_IRQ_READ0_, late_col_, v6) << R_IRQ_READ0__late_col__BITNR) | \
- (R_IRQ_READ0__multiple_col__##f7##__VAL(R_IRQ_READ0_, multiple_col_, v7) << R_IRQ_READ0__multiple_col__BITNR) | \
- (R_IRQ_READ0__single_col__##f8##__VAL(R_IRQ_READ0_, single_col_, v8) << R_IRQ_READ0__single_col__BITNR) | \
- (R_IRQ_READ0__congestion__##f9##__VAL(R_IRQ_READ0_, congestion_, v9) << R_IRQ_READ0__congestion__BITNR) | \
- (R_IRQ_READ0__oversize__##f10##__VAL(R_IRQ_READ0_, oversize_, v10) << R_IRQ_READ0__oversize__BITNR) | \
- (R_IRQ_READ0__alignment_error__##f11##__VAL(R_IRQ_READ0_, alignment_error_, v11) << R_IRQ_READ0__alignment_error__BITNR) | \
- (R_IRQ_READ0__crc_error__##f12##__VAL(R_IRQ_READ0_, crc_error_, v12) << R_IRQ_READ0__crc_error__BITNR) | \
- (R_IRQ_READ0__overrun__##f13##__VAL(R_IRQ_READ0_, overrun_, v13) << R_IRQ_READ0__overrun__BITNR) | \
- (R_IRQ_READ0__underrun__##f14##__VAL(R_IRQ_READ0_, underrun_, v14) << R_IRQ_READ0__underrun__BITNR) | \
- (R_IRQ_READ0__excessive_col__##f15##__VAL(R_IRQ_READ0_, excessive_col_, v15) << R_IRQ_READ0__excessive_col__BITNR) | \
- (R_IRQ_READ0__mdio__##f16##__VAL(R_IRQ_READ0_, mdio_, v16) << R_IRQ_READ0__mdio__BITNR) | \
- (R_IRQ_READ0__ata_drq3__##f17##__VAL(R_IRQ_READ0_, ata_drq3_, v17) << R_IRQ_READ0__ata_drq3__BITNR) | \
- (R_IRQ_READ0__ata_drq2__##f18##__VAL(R_IRQ_READ0_, ata_drq2_, v18) << R_IRQ_READ0__ata_drq2__BITNR) | \
- (R_IRQ_READ0__ata_drq1__##f19##__VAL(R_IRQ_READ0_, ata_drq1_, v19) << R_IRQ_READ0__ata_drq1__BITNR) | \
- (R_IRQ_READ0__ata_drq0__##f20##__VAL(R_IRQ_READ0_, ata_drq0_, v20) << R_IRQ_READ0__ata_drq0__BITNR) | \
- (R_IRQ_READ0__par0_ecp_cmd__##f21##__VAL(R_IRQ_READ0_, par0_ecp_cmd_, v21) << R_IRQ_READ0__par0_ecp_cmd__BITNR) | \
- (R_IRQ_READ0__par0_peri__##f22##__VAL(R_IRQ_READ0_, par0_peri_, v22) << R_IRQ_READ0__par0_peri__BITNR) | \
- (R_IRQ_READ0__par0_data__##f23##__VAL(R_IRQ_READ0_, par0_data_, v23) << R_IRQ_READ0__par0_data__BITNR) | \
- (R_IRQ_READ0__par0_ready__##f24##__VAL(R_IRQ_READ0_, par0_ready_, v24) << R_IRQ_READ0__par0_ready__BITNR) | \
- (R_IRQ_READ0__ata_dmaend__##f25##__VAL(R_IRQ_READ0_, ata_dmaend_, v25) << R_IRQ_READ0__ata_dmaend__BITNR) | \
- (R_IRQ_READ0__irq_ext_vector_nr__##f26##__VAL(R_IRQ_READ0_, irq_ext_vector_nr_, v26) << R_IRQ_READ0__irq_ext_vector_nr__BITNR) | \
- (R_IRQ_READ0__irq_int_vector_nr__##f27##__VAL(R_IRQ_READ0_, irq_int_vector_nr_, v27) << R_IRQ_READ0__irq_int_vector_nr__BITNR) | \
- (R_IRQ_READ0__ext_dma1__##f28##__VAL(R_IRQ_READ0_, ext_dma1_, v28) << R_IRQ_READ0__ext_dma1__BITNR) | \
- (R_IRQ_READ0__ext_dma0__##f29##__VAL(R_IRQ_READ0_, ext_dma0_, v29) << R_IRQ_READ0__ext_dma0__BITNR) | \
- (R_IRQ_READ0__timer1__##f30##__VAL(R_IRQ_READ0_, timer1_, v30) << R_IRQ_READ0__timer1__BITNR) | \
- (R_IRQ_READ0__timer0__##f31##__VAL(R_IRQ_READ0_, timer0_, v31) << R_IRQ_READ0__timer0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_READ0_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_READ0.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_READ0_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25,f26_,v26,f27_,v27,f28_,v28,f29_,v29,f30_,v30,f31_,v31) ( \
- (R_IRQ_READ0__nmi_pin__##f1_##_VAL(R_IRQ_READ0_, nmi_pin_, v1) << R_IRQ_READ0__nmi_pin__BITNR) | \
- (R_IRQ_READ0__watchdog_nmi__##f2_##_VAL(R_IRQ_READ0_, watchdog_nmi_, v2) << R_IRQ_READ0__watchdog_nmi__BITNR) | \
- (R_IRQ_READ0__sqe_test_error__##f3_##_VAL(R_IRQ_READ0_, sqe_test_error_, v3) << R_IRQ_READ0__sqe_test_error__BITNR) | \
- (R_IRQ_READ0__carrier_loss__##f4_##_VAL(R_IRQ_READ0_, carrier_loss_, v4) << R_IRQ_READ0__carrier_loss__BITNR) | \
- (R_IRQ_READ0__deferred__##f5_##_VAL(R_IRQ_READ0_, deferred_, v5) << R_IRQ_READ0__deferred__BITNR) | \
- (R_IRQ_READ0__late_col__##f6_##_VAL(R_IRQ_READ0_, late_col_, v6) << R_IRQ_READ0__late_col__BITNR) | \
- (R_IRQ_READ0__multiple_col__##f7_##_VAL(R_IRQ_READ0_, multiple_col_, v7) << R_IRQ_READ0__multiple_col__BITNR) | \
- (R_IRQ_READ0__single_col__##f8_##_VAL(R_IRQ_READ0_, single_col_, v8) << R_IRQ_READ0__single_col__BITNR) | \
- (R_IRQ_READ0__congestion__##f9_##_VAL(R_IRQ_READ0_, congestion_, v9) << R_IRQ_READ0__congestion__BITNR) | \
- (R_IRQ_READ0__oversize__##f10_##_VAL(R_IRQ_READ0_, oversize_, v10) << R_IRQ_READ0__oversize__BITNR) | \
- (R_IRQ_READ0__alignment_error__##f11_##_VAL(R_IRQ_READ0_, alignment_error_, v11) << R_IRQ_READ0__alignment_error__BITNR) | \
- (R_IRQ_READ0__crc_error__##f12_##_VAL(R_IRQ_READ0_, crc_error_, v12) << R_IRQ_READ0__crc_error__BITNR) | \
- (R_IRQ_READ0__overrun__##f13_##_VAL(R_IRQ_READ0_, overrun_, v13) << R_IRQ_READ0__overrun__BITNR) | \
- (R_IRQ_READ0__underrun__##f14_##_VAL(R_IRQ_READ0_, underrun_, v14) << R_IRQ_READ0__underrun__BITNR) | \
- (R_IRQ_READ0__excessive_col__##f15_##_VAL(R_IRQ_READ0_, excessive_col_, v15) << R_IRQ_READ0__excessive_col__BITNR) | \
- (R_IRQ_READ0__mdio__##f16_##_VAL(R_IRQ_READ0_, mdio_, v16) << R_IRQ_READ0__mdio__BITNR) | \
- (R_IRQ_READ0__ata_drq3__##f17_##_VAL(R_IRQ_READ0_, ata_drq3_, v17) << R_IRQ_READ0__ata_drq3__BITNR) | \
- (R_IRQ_READ0__ata_drq2__##f18_##_VAL(R_IRQ_READ0_, ata_drq2_, v18) << R_IRQ_READ0__ata_drq2__BITNR) | \
- (R_IRQ_READ0__ata_drq1__##f19_##_VAL(R_IRQ_READ0_, ata_drq1_, v19) << R_IRQ_READ0__ata_drq1__BITNR) | \
- (R_IRQ_READ0__ata_drq0__##f20_##_VAL(R_IRQ_READ0_, ata_drq0_, v20) << R_IRQ_READ0__ata_drq0__BITNR) | \
- (R_IRQ_READ0__par0_ecp_cmd__##f21_##_VAL(R_IRQ_READ0_, par0_ecp_cmd_, v21) << R_IRQ_READ0__par0_ecp_cmd__BITNR) | \
- (R_IRQ_READ0__par0_peri__##f22_##_VAL(R_IRQ_READ0_, par0_peri_, v22) << R_IRQ_READ0__par0_peri__BITNR) | \
- (R_IRQ_READ0__par0_data__##f23_##_VAL(R_IRQ_READ0_, par0_data_, v23) << R_IRQ_READ0__par0_data__BITNR) | \
- (R_IRQ_READ0__par0_ready__##f24_##_VAL(R_IRQ_READ0_, par0_ready_, v24) << R_IRQ_READ0__par0_ready__BITNR) | \
- (R_IRQ_READ0__ata_dmaend__##f25_##_VAL(R_IRQ_READ0_, ata_dmaend_, v25) << R_IRQ_READ0__ata_dmaend__BITNR) | \
- (R_IRQ_READ0__irq_ext_vector_nr__##f26_##_VAL(R_IRQ_READ0_, irq_ext_vector_nr_, v26) << R_IRQ_READ0__irq_ext_vector_nr__BITNR) | \
- (R_IRQ_READ0__irq_int_vector_nr__##f27_##_VAL(R_IRQ_READ0_, irq_int_vector_nr_, v27) << R_IRQ_READ0__irq_int_vector_nr__BITNR) | \
- (R_IRQ_READ0__ext_dma1__##f28_##_VAL(R_IRQ_READ0_, ext_dma1_, v28) << R_IRQ_READ0__ext_dma1__BITNR) | \
- (R_IRQ_READ0__ext_dma0__##f29_##_VAL(R_IRQ_READ0_, ext_dma0_, v29) << R_IRQ_READ0__ext_dma0__BITNR) | \
- (R_IRQ_READ0__timer1__##f30_##_VAL(R_IRQ_READ0_, timer1_, v30) << R_IRQ_READ0__timer1__BITNR) | \
- (R_IRQ_READ0__timer0__##f31_##_VAL(R_IRQ_READ0_, timer0_, v31) << R_IRQ_READ0__timer0__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_READ1
- * - type: RO
- * - addr: 0xb00000cc
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_READ1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_READ1(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- (R_IRQ_READ1__sw_int7__##f1##__MASK & REG__##v1) | \
- (R_IRQ_READ1__sw_int6__##f2##__MASK & REG__##v2) | \
- (R_IRQ_READ1__sw_int5__##f3##__MASK & REG__##v3) | \
- (R_IRQ_READ1__sw_int4__##f4##__MASK & REG__##v4) | \
- (R_IRQ_READ1__sw_int3__##f5##__MASK & REG__##v5) | \
- (R_IRQ_READ1__sw_int2__##f6##__MASK & REG__##v6) | \
- (R_IRQ_READ1__sw_int1__##f7##__MASK & REG__##v7) | \
- (R_IRQ_READ1__sw_int0__##f8##__MASK & REG__##v8) | \
- (R_IRQ_READ1__par1_ecp_cmd__##f9##__MASK & REG__##v9) | \
- (R_IRQ_READ1__par1_peri__##f10##__MASK & REG__##v10) | \
- (R_IRQ_READ1__par1_data__##f11##__MASK & REG__##v11) | \
- (R_IRQ_READ1__par1_ready__##f12##__MASK & REG__##v12) | \
- (R_IRQ_READ1__ser3_ready__##f13##__MASK & REG__##v13) | \
- (R_IRQ_READ1__ser3_data__##f14##__MASK & REG__##v14) | \
- (R_IRQ_READ1__ser2_ready__##f15##__MASK & REG__##v15) | \
- (R_IRQ_READ1__ser2_data__##f16##__MASK & REG__##v16) | \
- (R_IRQ_READ1__ser1_ready__##f17##__MASK & REG__##v17) | \
- (R_IRQ_READ1__ser1_data__##f18##__MASK & REG__##v18) | \
- (R_IRQ_READ1__ser0_ready__##f19##__MASK & REG__##v19) | \
- (R_IRQ_READ1__ser0_data__##f20##__MASK & REG__##v20) | \
- (R_IRQ_READ1__pa7__##f21##__MASK & REG__##v21) | \
- (R_IRQ_READ1__pa6__##f22##__MASK & REG__##v22) | \
- (R_IRQ_READ1__pa5__##f23##__MASK & REG__##v23) | \
- (R_IRQ_READ1__pa4__##f24##__MASK & REG__##v24) | \
- (R_IRQ_READ1__pa3__##f25##__MASK & REG__##v25) | \
- (R_IRQ_READ1__pa2__##f26##__MASK & REG__##v26) | \
- (R_IRQ_READ1__pa1__##f27##__MASK & REG__##v27) | \
- (R_IRQ_READ1__pa0__##f28##__MASK & REG__##v28) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_READ1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_READ1.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_READ1(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25,f26,v26,f27,v27,f28,v28) ( \
- (R_IRQ_READ1__sw_int7__##f1##__VAL(R_IRQ_READ1_, sw_int7_, v1) << R_IRQ_READ1__sw_int7__BITNR) | \
- (R_IRQ_READ1__sw_int6__##f2##__VAL(R_IRQ_READ1_, sw_int6_, v2) << R_IRQ_READ1__sw_int6__BITNR) | \
- (R_IRQ_READ1__sw_int5__##f3##__VAL(R_IRQ_READ1_, sw_int5_, v3) << R_IRQ_READ1__sw_int5__BITNR) | \
- (R_IRQ_READ1__sw_int4__##f4##__VAL(R_IRQ_READ1_, sw_int4_, v4) << R_IRQ_READ1__sw_int4__BITNR) | \
- (R_IRQ_READ1__sw_int3__##f5##__VAL(R_IRQ_READ1_, sw_int3_, v5) << R_IRQ_READ1__sw_int3__BITNR) | \
- (R_IRQ_READ1__sw_int2__##f6##__VAL(R_IRQ_READ1_, sw_int2_, v6) << R_IRQ_READ1__sw_int2__BITNR) | \
- (R_IRQ_READ1__sw_int1__##f7##__VAL(R_IRQ_READ1_, sw_int1_, v7) << R_IRQ_READ1__sw_int1__BITNR) | \
- (R_IRQ_READ1__sw_int0__##f8##__VAL(R_IRQ_READ1_, sw_int0_, v8) << R_IRQ_READ1__sw_int0__BITNR) | \
- (R_IRQ_READ1__par1_ecp_cmd__##f9##__VAL(R_IRQ_READ1_, par1_ecp_cmd_, v9) << R_IRQ_READ1__par1_ecp_cmd__BITNR) | \
- (R_IRQ_READ1__par1_peri__##f10##__VAL(R_IRQ_READ1_, par1_peri_, v10) << R_IRQ_READ1__par1_peri__BITNR) | \
- (R_IRQ_READ1__par1_data__##f11##__VAL(R_IRQ_READ1_, par1_data_, v11) << R_IRQ_READ1__par1_data__BITNR) | \
- (R_IRQ_READ1__par1_ready__##f12##__VAL(R_IRQ_READ1_, par1_ready_, v12) << R_IRQ_READ1__par1_ready__BITNR) | \
- (R_IRQ_READ1__ser3_ready__##f13##__VAL(R_IRQ_READ1_, ser3_ready_, v13) << R_IRQ_READ1__ser3_ready__BITNR) | \
- (R_IRQ_READ1__ser3_data__##f14##__VAL(R_IRQ_READ1_, ser3_data_, v14) << R_IRQ_READ1__ser3_data__BITNR) | \
- (R_IRQ_READ1__ser2_ready__##f15##__VAL(R_IRQ_READ1_, ser2_ready_, v15) << R_IRQ_READ1__ser2_ready__BITNR) | \
- (R_IRQ_READ1__ser2_data__##f16##__VAL(R_IRQ_READ1_, ser2_data_, v16) << R_IRQ_READ1__ser2_data__BITNR) | \
- (R_IRQ_READ1__ser1_ready__##f17##__VAL(R_IRQ_READ1_, ser1_ready_, v17) << R_IRQ_READ1__ser1_ready__BITNR) | \
- (R_IRQ_READ1__ser1_data__##f18##__VAL(R_IRQ_READ1_, ser1_data_, v18) << R_IRQ_READ1__ser1_data__BITNR) | \
- (R_IRQ_READ1__ser0_ready__##f19##__VAL(R_IRQ_READ1_, ser0_ready_, v19) << R_IRQ_READ1__ser0_ready__BITNR) | \
- (R_IRQ_READ1__ser0_data__##f20##__VAL(R_IRQ_READ1_, ser0_data_, v20) << R_IRQ_READ1__ser0_data__BITNR) | \
- (R_IRQ_READ1__pa7__##f21##__VAL(R_IRQ_READ1_, pa7_, v21) << R_IRQ_READ1__pa7__BITNR) | \
- (R_IRQ_READ1__pa6__##f22##__VAL(R_IRQ_READ1_, pa6_, v22) << R_IRQ_READ1__pa6__BITNR) | \
- (R_IRQ_READ1__pa5__##f23##__VAL(R_IRQ_READ1_, pa5_, v23) << R_IRQ_READ1__pa5__BITNR) | \
- (R_IRQ_READ1__pa4__##f24##__VAL(R_IRQ_READ1_, pa4_, v24) << R_IRQ_READ1__pa4__BITNR) | \
- (R_IRQ_READ1__pa3__##f25##__VAL(R_IRQ_READ1_, pa3_, v25) << R_IRQ_READ1__pa3__BITNR) | \
- (R_IRQ_READ1__pa2__##f26##__VAL(R_IRQ_READ1_, pa2_, v26) << R_IRQ_READ1__pa2__BITNR) | \
- (R_IRQ_READ1__pa1__##f27##__VAL(R_IRQ_READ1_, pa1_, v27) << R_IRQ_READ1__pa1__BITNR) | \
- (R_IRQ_READ1__pa0__##f28##__VAL(R_IRQ_READ1_, pa0_, v28) << R_IRQ_READ1__pa0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_READ1_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_READ1.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_READ1_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25,f26_,v26,f27_,v27,f28_,v28) ( \
- (R_IRQ_READ1__sw_int7__##f1_##_VAL(R_IRQ_READ1_, sw_int7_, v1) << R_IRQ_READ1__sw_int7__BITNR) | \
- (R_IRQ_READ1__sw_int6__##f2_##_VAL(R_IRQ_READ1_, sw_int6_, v2) << R_IRQ_READ1__sw_int6__BITNR) | \
- (R_IRQ_READ1__sw_int5__##f3_##_VAL(R_IRQ_READ1_, sw_int5_, v3) << R_IRQ_READ1__sw_int5__BITNR) | \
- (R_IRQ_READ1__sw_int4__##f4_##_VAL(R_IRQ_READ1_, sw_int4_, v4) << R_IRQ_READ1__sw_int4__BITNR) | \
- (R_IRQ_READ1__sw_int3__##f5_##_VAL(R_IRQ_READ1_, sw_int3_, v5) << R_IRQ_READ1__sw_int3__BITNR) | \
- (R_IRQ_READ1__sw_int2__##f6_##_VAL(R_IRQ_READ1_, sw_int2_, v6) << R_IRQ_READ1__sw_int2__BITNR) | \
- (R_IRQ_READ1__sw_int1__##f7_##_VAL(R_IRQ_READ1_, sw_int1_, v7) << R_IRQ_READ1__sw_int1__BITNR) | \
- (R_IRQ_READ1__sw_int0__##f8_##_VAL(R_IRQ_READ1_, sw_int0_, v8) << R_IRQ_READ1__sw_int0__BITNR) | \
- (R_IRQ_READ1__par1_ecp_cmd__##f9_##_VAL(R_IRQ_READ1_, par1_ecp_cmd_, v9) << R_IRQ_READ1__par1_ecp_cmd__BITNR) | \
- (R_IRQ_READ1__par1_peri__##f10_##_VAL(R_IRQ_READ1_, par1_peri_, v10) << R_IRQ_READ1__par1_peri__BITNR) | \
- (R_IRQ_READ1__par1_data__##f11_##_VAL(R_IRQ_READ1_, par1_data_, v11) << R_IRQ_READ1__par1_data__BITNR) | \
- (R_IRQ_READ1__par1_ready__##f12_##_VAL(R_IRQ_READ1_, par1_ready_, v12) << R_IRQ_READ1__par1_ready__BITNR) | \
- (R_IRQ_READ1__ser3_ready__##f13_##_VAL(R_IRQ_READ1_, ser3_ready_, v13) << R_IRQ_READ1__ser3_ready__BITNR) | \
- (R_IRQ_READ1__ser3_data__##f14_##_VAL(R_IRQ_READ1_, ser3_data_, v14) << R_IRQ_READ1__ser3_data__BITNR) | \
- (R_IRQ_READ1__ser2_ready__##f15_##_VAL(R_IRQ_READ1_, ser2_ready_, v15) << R_IRQ_READ1__ser2_ready__BITNR) | \
- (R_IRQ_READ1__ser2_data__##f16_##_VAL(R_IRQ_READ1_, ser2_data_, v16) << R_IRQ_READ1__ser2_data__BITNR) | \
- (R_IRQ_READ1__ser1_ready__##f17_##_VAL(R_IRQ_READ1_, ser1_ready_, v17) << R_IRQ_READ1__ser1_ready__BITNR) | \
- (R_IRQ_READ1__ser1_data__##f18_##_VAL(R_IRQ_READ1_, ser1_data_, v18) << R_IRQ_READ1__ser1_data__BITNR) | \
- (R_IRQ_READ1__ser0_ready__##f19_##_VAL(R_IRQ_READ1_, ser0_ready_, v19) << R_IRQ_READ1__ser0_ready__BITNR) | \
- (R_IRQ_READ1__ser0_data__##f20_##_VAL(R_IRQ_READ1_, ser0_data_, v20) << R_IRQ_READ1__ser0_data__BITNR) | \
- (R_IRQ_READ1__pa7__##f21_##_VAL(R_IRQ_READ1_, pa7_, v21) << R_IRQ_READ1__pa7__BITNR) | \
- (R_IRQ_READ1__pa6__##f22_##_VAL(R_IRQ_READ1_, pa6_, v22) << R_IRQ_READ1__pa6__BITNR) | \
- (R_IRQ_READ1__pa5__##f23_##_VAL(R_IRQ_READ1_, pa5_, v23) << R_IRQ_READ1__pa5__BITNR) | \
- (R_IRQ_READ1__pa4__##f24_##_VAL(R_IRQ_READ1_, pa4_, v24) << R_IRQ_READ1__pa4__BITNR) | \
- (R_IRQ_READ1__pa3__##f25_##_VAL(R_IRQ_READ1_, pa3_, v25) << R_IRQ_READ1__pa3__BITNR) | \
- (R_IRQ_READ1__pa2__##f26_##_VAL(R_IRQ_READ1_, pa2_, v26) << R_IRQ_READ1__pa2__BITNR) | \
- (R_IRQ_READ1__pa1__##f27_##_VAL(R_IRQ_READ1_, pa1_, v27) << R_IRQ_READ1__pa1__BITNR) | \
- (R_IRQ_READ1__pa0__##f28_##_VAL(R_IRQ_READ1_, pa0_, v28) << R_IRQ_READ1__pa0__BITNR) \
-)
-
-#endif
-
-/*
- * R_IRQ_READ2
- * - type: RO
- * - addr: 0xb00000d4
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_IRQ_READ2
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_IRQ_READ2(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- (R_IRQ_READ2__dma8_sub3_descr__##f1##__MASK & REG__##v1) | \
- (R_IRQ_READ2__dma8_sub2_descr__##f2##__MASK & REG__##v2) | \
- (R_IRQ_READ2__dma8_sub1_descr__##f3##__MASK & REG__##v3) | \
- (R_IRQ_READ2__dma8_sub0_descr__##f4##__MASK & REG__##v4) | \
- (R_IRQ_READ2__dma9_eop__##f5##__MASK & REG__##v5) | \
- (R_IRQ_READ2__dma9_descr__##f6##__MASK & REG__##v6) | \
- (R_IRQ_READ2__dma8_eop__##f7##__MASK & REG__##v7) | \
- (R_IRQ_READ2__dma8_descr__##f8##__MASK & REG__##v8) | \
- (R_IRQ_READ2__dma7_eop__##f9##__MASK & REG__##v9) | \
- (R_IRQ_READ2__dma7_descr__##f10##__MASK & REG__##v10) | \
- (R_IRQ_READ2__dma6_eop__##f11##__MASK & REG__##v11) | \
- (R_IRQ_READ2__dma6_descr__##f12##__MASK & REG__##v12) | \
- (R_IRQ_READ2__dma5_eop__##f13##__MASK & REG__##v13) | \
- (R_IRQ_READ2__dma5_descr__##f14##__MASK & REG__##v14) | \
- (R_IRQ_READ2__dma4_eop__##f15##__MASK & REG__##v15) | \
- (R_IRQ_READ2__dma4_descr__##f16##__MASK & REG__##v16) | \
- (R_IRQ_READ2__dma3_eop__##f17##__MASK & REG__##v17) | \
- (R_IRQ_READ2__dma3_descr__##f18##__MASK & REG__##v18) | \
- (R_IRQ_READ2__dma2_eop__##f19##__MASK & REG__##v19) | \
- (R_IRQ_READ2__dma2_descr__##f20##__MASK & REG__##v20) | \
- (R_IRQ_READ2__dma1_eop__##f21##__MASK & REG__##v21) | \
- (R_IRQ_READ2__dma1_descr__##f22##__MASK & REG__##v22) | \
- (R_IRQ_READ2__dma0_eop__##f23##__MASK & REG__##v23) | \
- (R_IRQ_READ2__dma0_descr__##f24##__MASK & REG__##v24) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_READ2
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_READ2.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_READ2(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24) ( \
- (R_IRQ_READ2__dma8_sub3_descr__##f1##__VAL(R_IRQ_READ2_, dma8_sub3_descr_, v1) << R_IRQ_READ2__dma8_sub3_descr__BITNR) | \
- (R_IRQ_READ2__dma8_sub2_descr__##f2##__VAL(R_IRQ_READ2_, dma8_sub2_descr_, v2) << R_IRQ_READ2__dma8_sub2_descr__BITNR) | \
- (R_IRQ_READ2__dma8_sub1_descr__##f3##__VAL(R_IRQ_READ2_, dma8_sub1_descr_, v3) << R_IRQ_READ2__dma8_sub1_descr__BITNR) | \
- (R_IRQ_READ2__dma8_sub0_descr__##f4##__VAL(R_IRQ_READ2_, dma8_sub0_descr_, v4) << R_IRQ_READ2__dma8_sub0_descr__BITNR) | \
- (R_IRQ_READ2__dma9_eop__##f5##__VAL(R_IRQ_READ2_, dma9_eop_, v5) << R_IRQ_READ2__dma9_eop__BITNR) | \
- (R_IRQ_READ2__dma9_descr__##f6##__VAL(R_IRQ_READ2_, dma9_descr_, v6) << R_IRQ_READ2__dma9_descr__BITNR) | \
- (R_IRQ_READ2__dma8_eop__##f7##__VAL(R_IRQ_READ2_, dma8_eop_, v7) << R_IRQ_READ2__dma8_eop__BITNR) | \
- (R_IRQ_READ2__dma8_descr__##f8##__VAL(R_IRQ_READ2_, dma8_descr_, v8) << R_IRQ_READ2__dma8_descr__BITNR) | \
- (R_IRQ_READ2__dma7_eop__##f9##__VAL(R_IRQ_READ2_, dma7_eop_, v9) << R_IRQ_READ2__dma7_eop__BITNR) | \
- (R_IRQ_READ2__dma7_descr__##f10##__VAL(R_IRQ_READ2_, dma7_descr_, v10) << R_IRQ_READ2__dma7_descr__BITNR) | \
- (R_IRQ_READ2__dma6_eop__##f11##__VAL(R_IRQ_READ2_, dma6_eop_, v11) << R_IRQ_READ2__dma6_eop__BITNR) | \
- (R_IRQ_READ2__dma6_descr__##f12##__VAL(R_IRQ_READ2_, dma6_descr_, v12) << R_IRQ_READ2__dma6_descr__BITNR) | \
- (R_IRQ_READ2__dma5_eop__##f13##__VAL(R_IRQ_READ2_, dma5_eop_, v13) << R_IRQ_READ2__dma5_eop__BITNR) | \
- (R_IRQ_READ2__dma5_descr__##f14##__VAL(R_IRQ_READ2_, dma5_descr_, v14) << R_IRQ_READ2__dma5_descr__BITNR) | \
- (R_IRQ_READ2__dma4_eop__##f15##__VAL(R_IRQ_READ2_, dma4_eop_, v15) << R_IRQ_READ2__dma4_eop__BITNR) | \
- (R_IRQ_READ2__dma4_descr__##f16##__VAL(R_IRQ_READ2_, dma4_descr_, v16) << R_IRQ_READ2__dma4_descr__BITNR) | \
- (R_IRQ_READ2__dma3_eop__##f17##__VAL(R_IRQ_READ2_, dma3_eop_, v17) << R_IRQ_READ2__dma3_eop__BITNR) | \
- (R_IRQ_READ2__dma3_descr__##f18##__VAL(R_IRQ_READ2_, dma3_descr_, v18) << R_IRQ_READ2__dma3_descr__BITNR) | \
- (R_IRQ_READ2__dma2_eop__##f19##__VAL(R_IRQ_READ2_, dma2_eop_, v19) << R_IRQ_READ2__dma2_eop__BITNR) | \
- (R_IRQ_READ2__dma2_descr__##f20##__VAL(R_IRQ_READ2_, dma2_descr_, v20) << R_IRQ_READ2__dma2_descr__BITNR) | \
- (R_IRQ_READ2__dma1_eop__##f21##__VAL(R_IRQ_READ2_, dma1_eop_, v21) << R_IRQ_READ2__dma1_eop__BITNR) | \
- (R_IRQ_READ2__dma1_descr__##f22##__VAL(R_IRQ_READ2_, dma1_descr_, v22) << R_IRQ_READ2__dma1_descr__BITNR) | \
- (R_IRQ_READ2__dma0_eop__##f23##__VAL(R_IRQ_READ2_, dma0_eop_, v23) << R_IRQ_READ2__dma0_eop__BITNR) | \
- (R_IRQ_READ2__dma0_descr__##f24##__VAL(R_IRQ_READ2_, dma0_descr_, v24) << R_IRQ_READ2__dma0_descr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_IRQ_READ2_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_IRQ_READ2.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_IRQ_READ2_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24) ( \
- (R_IRQ_READ2__dma8_sub3_descr__##f1_##_VAL(R_IRQ_READ2_, dma8_sub3_descr_, v1) << R_IRQ_READ2__dma8_sub3_descr__BITNR) | \
- (R_IRQ_READ2__dma8_sub2_descr__##f2_##_VAL(R_IRQ_READ2_, dma8_sub2_descr_, v2) << R_IRQ_READ2__dma8_sub2_descr__BITNR) | \
- (R_IRQ_READ2__dma8_sub1_descr__##f3_##_VAL(R_IRQ_READ2_, dma8_sub1_descr_, v3) << R_IRQ_READ2__dma8_sub1_descr__BITNR) | \
- (R_IRQ_READ2__dma8_sub0_descr__##f4_##_VAL(R_IRQ_READ2_, dma8_sub0_descr_, v4) << R_IRQ_READ2__dma8_sub0_descr__BITNR) | \
- (R_IRQ_READ2__dma9_eop__##f5_##_VAL(R_IRQ_READ2_, dma9_eop_, v5) << R_IRQ_READ2__dma9_eop__BITNR) | \
- (R_IRQ_READ2__dma9_descr__##f6_##_VAL(R_IRQ_READ2_, dma9_descr_, v6) << R_IRQ_READ2__dma9_descr__BITNR) | \
- (R_IRQ_READ2__dma8_eop__##f7_##_VAL(R_IRQ_READ2_, dma8_eop_, v7) << R_IRQ_READ2__dma8_eop__BITNR) | \
- (R_IRQ_READ2__dma8_descr__##f8_##_VAL(R_IRQ_READ2_, dma8_descr_, v8) << R_IRQ_READ2__dma8_descr__BITNR) | \
- (R_IRQ_READ2__dma7_eop__##f9_##_VAL(R_IRQ_READ2_, dma7_eop_, v9) << R_IRQ_READ2__dma7_eop__BITNR) | \
- (R_IRQ_READ2__dma7_descr__##f10_##_VAL(R_IRQ_READ2_, dma7_descr_, v10) << R_IRQ_READ2__dma7_descr__BITNR) | \
- (R_IRQ_READ2__dma6_eop__##f11_##_VAL(R_IRQ_READ2_, dma6_eop_, v11) << R_IRQ_READ2__dma6_eop__BITNR) | \
- (R_IRQ_READ2__dma6_descr__##f12_##_VAL(R_IRQ_READ2_, dma6_descr_, v12) << R_IRQ_READ2__dma6_descr__BITNR) | \
- (R_IRQ_READ2__dma5_eop__##f13_##_VAL(R_IRQ_READ2_, dma5_eop_, v13) << R_IRQ_READ2__dma5_eop__BITNR) | \
- (R_IRQ_READ2__dma5_descr__##f14_##_VAL(R_IRQ_READ2_, dma5_descr_, v14) << R_IRQ_READ2__dma5_descr__BITNR) | \
- (R_IRQ_READ2__dma4_eop__##f15_##_VAL(R_IRQ_READ2_, dma4_eop_, v15) << R_IRQ_READ2__dma4_eop__BITNR) | \
- (R_IRQ_READ2__dma4_descr__##f16_##_VAL(R_IRQ_READ2_, dma4_descr_, v16) << R_IRQ_READ2__dma4_descr__BITNR) | \
- (R_IRQ_READ2__dma3_eop__##f17_##_VAL(R_IRQ_READ2_, dma3_eop_, v17) << R_IRQ_READ2__dma3_eop__BITNR) | \
- (R_IRQ_READ2__dma3_descr__##f18_##_VAL(R_IRQ_READ2_, dma3_descr_, v18) << R_IRQ_READ2__dma3_descr__BITNR) | \
- (R_IRQ_READ2__dma2_eop__##f19_##_VAL(R_IRQ_READ2_, dma2_eop_, v19) << R_IRQ_READ2__dma2_eop__BITNR) | \
- (R_IRQ_READ2__dma2_descr__##f20_##_VAL(R_IRQ_READ2_, dma2_descr_, v20) << R_IRQ_READ2__dma2_descr__BITNR) | \
- (R_IRQ_READ2__dma1_eop__##f21_##_VAL(R_IRQ_READ2_, dma1_eop_, v21) << R_IRQ_READ2__dma1_eop__BITNR) | \
- (R_IRQ_READ2__dma1_descr__##f22_##_VAL(R_IRQ_READ2_, dma1_descr_, v22) << R_IRQ_READ2__dma1_descr__BITNR) | \
- (R_IRQ_READ2__dma0_eop__##f23_##_VAL(R_IRQ_READ2_, dma0_eop_, v23) << R_IRQ_READ2__dma0_eop__BITNR) | \
- (R_IRQ_READ2__dma0_descr__##f24_##_VAL(R_IRQ_READ2_, dma0_descr_, v24) << R_IRQ_READ2__dma0_descr__BITNR) \
-)
-
-#endif
-
-/*
- * R_MMU_CAUSE
- * - type: RO
- * - addr: 0xb0000250
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_MMU_CAUSE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_MMU_CAUSE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- (R_MMU_CAUSE__vpn__##f1##__MASK & REG__##v1) | \
- (R_MMU_CAUSE__miss_excp__##f2##__MASK & REG__##v2) | \
- (R_MMU_CAUSE__inv_excp__##f3##__MASK & REG__##v3) | \
- (R_MMU_CAUSE__acc_excp__##f4##__MASK & REG__##v4) | \
- (R_MMU_CAUSE__we_excp__##f5##__MASK & REG__##v5) | \
- (R_MMU_CAUSE__wr_rd__##f6##__MASK & REG__##v6) | \
- (R_MMU_CAUSE__page_id__##f7##__MASK & REG__##v7) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_CAUSE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_CAUSE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_CAUSE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- (R_MMU_CAUSE__vpn__##f1##__VAL(R_MMU_CAUSE_, vpn_, v1) << R_MMU_CAUSE__vpn__BITNR) | \
- (R_MMU_CAUSE__miss_excp__##f2##__VAL(R_MMU_CAUSE_, miss_excp_, v2) << R_MMU_CAUSE__miss_excp__BITNR) | \
- (R_MMU_CAUSE__inv_excp__##f3##__VAL(R_MMU_CAUSE_, inv_excp_, v3) << R_MMU_CAUSE__inv_excp__BITNR) | \
- (R_MMU_CAUSE__acc_excp__##f4##__VAL(R_MMU_CAUSE_, acc_excp_, v4) << R_MMU_CAUSE__acc_excp__BITNR) | \
- (R_MMU_CAUSE__we_excp__##f5##__VAL(R_MMU_CAUSE_, we_excp_, v5) << R_MMU_CAUSE__we_excp__BITNR) | \
- (R_MMU_CAUSE__wr_rd__##f6##__VAL(R_MMU_CAUSE_, wr_rd_, v6) << R_MMU_CAUSE__wr_rd__BITNR) | \
- (R_MMU_CAUSE__page_id__##f7##__VAL(R_MMU_CAUSE_, page_id_, v7) << R_MMU_CAUSE__page_id__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_CAUSE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_CAUSE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_CAUSE_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7) ( \
- (R_MMU_CAUSE__vpn__##f1_##_VAL(R_MMU_CAUSE_, vpn_, v1) << R_MMU_CAUSE__vpn__BITNR) | \
- (R_MMU_CAUSE__miss_excp__##f2_##_VAL(R_MMU_CAUSE_, miss_excp_, v2) << R_MMU_CAUSE__miss_excp__BITNR) | \
- (R_MMU_CAUSE__inv_excp__##f3_##_VAL(R_MMU_CAUSE_, inv_excp_, v3) << R_MMU_CAUSE__inv_excp__BITNR) | \
- (R_MMU_CAUSE__acc_excp__##f4_##_VAL(R_MMU_CAUSE_, acc_excp_, v4) << R_MMU_CAUSE__acc_excp__BITNR) | \
- (R_MMU_CAUSE__we_excp__##f5_##_VAL(R_MMU_CAUSE_, we_excp_, v5) << R_MMU_CAUSE__we_excp__BITNR) | \
- (R_MMU_CAUSE__wr_rd__##f6_##_VAL(R_MMU_CAUSE_, wr_rd_, v6) << R_MMU_CAUSE__wr_rd__BITNR) | \
- (R_MMU_CAUSE__page_id__##f7_##_VAL(R_MMU_CAUSE_, page_id_, v7) << R_MMU_CAUSE__page_id__BITNR) \
-)
-
-#endif
-
-/*
- * R_MMU_CONFIG
- * - type: WO
- * - addr: 0xb0000240
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_MMU_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20) ( \
- *R_MMU_CONFIG__SADDR = ( \
- REG_INITIATED(R_MMU_CONFIG_) \
- REG_VAL__R_MMU_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20) \
- ), \
- R_MMU_CONFIG__WRITE(R_MMU_CONFIG__ADDR, *R_MMU_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_MMU_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20) ( \
- *R_MMU_CONFIG__SADDR = ( \
- REG_INITIATED(R_MMU_CONFIG_) \
- REG_VAL__R_MMU_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_MMU_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_MMU_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20) ( \
- (R_MMU_CONFIG__mmu_enable__##f1##__MASK & REG__##v1) | \
- (R_MMU_CONFIG__inv_excp__##f2##__MASK & REG__##v2) | \
- (R_MMU_CONFIG__acc_excp__##f3##__MASK & REG__##v3) | \
- (R_MMU_CONFIG__we_excp__##f4##__MASK & REG__##v4) | \
- (R_MMU_CONFIG__seg_f__##f5##__MASK & REG__##v5) | \
- (R_MMU_CONFIG__seg_e__##f6##__MASK & REG__##v6) | \
- (R_MMU_CONFIG__seg_d__##f7##__MASK & REG__##v7) | \
- (R_MMU_CONFIG__seg_c__##f8##__MASK & REG__##v8) | \
- (R_MMU_CONFIG__seg_b__##f9##__MASK & REG__##v9) | \
- (R_MMU_CONFIG__seg_a__##f10##__MASK & REG__##v10) | \
- (R_MMU_CONFIG__seg_9__##f11##__MASK & REG__##v11) | \
- (R_MMU_CONFIG__seg_8__##f12##__MASK & REG__##v12) | \
- (R_MMU_CONFIG__seg_7__##f13##__MASK & REG__##v13) | \
- (R_MMU_CONFIG__seg_6__##f14##__MASK & REG__##v14) | \
- (R_MMU_CONFIG__seg_5__##f15##__MASK & REG__##v15) | \
- (R_MMU_CONFIG__seg_4__##f16##__MASK & REG__##v16) | \
- (R_MMU_CONFIG__seg_3__##f17##__MASK & REG__##v17) | \
- (R_MMU_CONFIG__seg_2__##f18##__MASK & REG__##v18) | \
- (R_MMU_CONFIG__seg_1__##f19##__MASK & REG__##v19) | \
- (R_MMU_CONFIG__seg_0__##f20##__MASK & REG__##v20) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20) ( \
- (R_MMU_CONFIG__mmu_enable__##f1##__VAL(R_MMU_CONFIG_, mmu_enable_, v1) << R_MMU_CONFIG__mmu_enable__BITNR) | \
- (R_MMU_CONFIG__inv_excp__##f2##__VAL(R_MMU_CONFIG_, inv_excp_, v2) << R_MMU_CONFIG__inv_excp__BITNR) | \
- (R_MMU_CONFIG__acc_excp__##f3##__VAL(R_MMU_CONFIG_, acc_excp_, v3) << R_MMU_CONFIG__acc_excp__BITNR) | \
- (R_MMU_CONFIG__we_excp__##f4##__VAL(R_MMU_CONFIG_, we_excp_, v4) << R_MMU_CONFIG__we_excp__BITNR) | \
- (R_MMU_CONFIG__seg_f__##f5##__VAL(R_MMU_CONFIG_, seg_f_, v5) << R_MMU_CONFIG__seg_f__BITNR) | \
- (R_MMU_CONFIG__seg_e__##f6##__VAL(R_MMU_CONFIG_, seg_e_, v6) << R_MMU_CONFIG__seg_e__BITNR) | \
- (R_MMU_CONFIG__seg_d__##f7##__VAL(R_MMU_CONFIG_, seg_d_, v7) << R_MMU_CONFIG__seg_d__BITNR) | \
- (R_MMU_CONFIG__seg_c__##f8##__VAL(R_MMU_CONFIG_, seg_c_, v8) << R_MMU_CONFIG__seg_c__BITNR) | \
- (R_MMU_CONFIG__seg_b__##f9##__VAL(R_MMU_CONFIG_, seg_b_, v9) << R_MMU_CONFIG__seg_b__BITNR) | \
- (R_MMU_CONFIG__seg_a__##f10##__VAL(R_MMU_CONFIG_, seg_a_, v10) << R_MMU_CONFIG__seg_a__BITNR) | \
- (R_MMU_CONFIG__seg_9__##f11##__VAL(R_MMU_CONFIG_, seg_9_, v11) << R_MMU_CONFIG__seg_9__BITNR) | \
- (R_MMU_CONFIG__seg_8__##f12##__VAL(R_MMU_CONFIG_, seg_8_, v12) << R_MMU_CONFIG__seg_8__BITNR) | \
- (R_MMU_CONFIG__seg_7__##f13##__VAL(R_MMU_CONFIG_, seg_7_, v13) << R_MMU_CONFIG__seg_7__BITNR) | \
- (R_MMU_CONFIG__seg_6__##f14##__VAL(R_MMU_CONFIG_, seg_6_, v14) << R_MMU_CONFIG__seg_6__BITNR) | \
- (R_MMU_CONFIG__seg_5__##f15##__VAL(R_MMU_CONFIG_, seg_5_, v15) << R_MMU_CONFIG__seg_5__BITNR) | \
- (R_MMU_CONFIG__seg_4__##f16##__VAL(R_MMU_CONFIG_, seg_4_, v16) << R_MMU_CONFIG__seg_4__BITNR) | \
- (R_MMU_CONFIG__seg_3__##f17##__VAL(R_MMU_CONFIG_, seg_3_, v17) << R_MMU_CONFIG__seg_3__BITNR) | \
- (R_MMU_CONFIG__seg_2__##f18##__VAL(R_MMU_CONFIG_, seg_2_, v18) << R_MMU_CONFIG__seg_2__BITNR) | \
- (R_MMU_CONFIG__seg_1__##f19##__VAL(R_MMU_CONFIG_, seg_1_, v19) << R_MMU_CONFIG__seg_1__BITNR) | \
- (R_MMU_CONFIG__seg_0__##f20##__VAL(R_MMU_CONFIG_, seg_0_, v20) << R_MMU_CONFIG__seg_0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20) ( \
- (R_MMU_CONFIG__mmu_enable__##f1_##_VAL(R_MMU_CONFIG_, mmu_enable_, v1) << R_MMU_CONFIG__mmu_enable__BITNR) | \
- (R_MMU_CONFIG__inv_excp__##f2_##_VAL(R_MMU_CONFIG_, inv_excp_, v2) << R_MMU_CONFIG__inv_excp__BITNR) | \
- (R_MMU_CONFIG__acc_excp__##f3_##_VAL(R_MMU_CONFIG_, acc_excp_, v3) << R_MMU_CONFIG__acc_excp__BITNR) | \
- (R_MMU_CONFIG__we_excp__##f4_##_VAL(R_MMU_CONFIG_, we_excp_, v4) << R_MMU_CONFIG__we_excp__BITNR) | \
- (R_MMU_CONFIG__seg_f__##f5_##_VAL(R_MMU_CONFIG_, seg_f_, v5) << R_MMU_CONFIG__seg_f__BITNR) | \
- (R_MMU_CONFIG__seg_e__##f6_##_VAL(R_MMU_CONFIG_, seg_e_, v6) << R_MMU_CONFIG__seg_e__BITNR) | \
- (R_MMU_CONFIG__seg_d__##f7_##_VAL(R_MMU_CONFIG_, seg_d_, v7) << R_MMU_CONFIG__seg_d__BITNR) | \
- (R_MMU_CONFIG__seg_c__##f8_##_VAL(R_MMU_CONFIG_, seg_c_, v8) << R_MMU_CONFIG__seg_c__BITNR) | \
- (R_MMU_CONFIG__seg_b__##f9_##_VAL(R_MMU_CONFIG_, seg_b_, v9) << R_MMU_CONFIG__seg_b__BITNR) | \
- (R_MMU_CONFIG__seg_a__##f10_##_VAL(R_MMU_CONFIG_, seg_a_, v10) << R_MMU_CONFIG__seg_a__BITNR) | \
- (R_MMU_CONFIG__seg_9__##f11_##_VAL(R_MMU_CONFIG_, seg_9_, v11) << R_MMU_CONFIG__seg_9__BITNR) | \
- (R_MMU_CONFIG__seg_8__##f12_##_VAL(R_MMU_CONFIG_, seg_8_, v12) << R_MMU_CONFIG__seg_8__BITNR) | \
- (R_MMU_CONFIG__seg_7__##f13_##_VAL(R_MMU_CONFIG_, seg_7_, v13) << R_MMU_CONFIG__seg_7__BITNR) | \
- (R_MMU_CONFIG__seg_6__##f14_##_VAL(R_MMU_CONFIG_, seg_6_, v14) << R_MMU_CONFIG__seg_6__BITNR) | \
- (R_MMU_CONFIG__seg_5__##f15_##_VAL(R_MMU_CONFIG_, seg_5_, v15) << R_MMU_CONFIG__seg_5__BITNR) | \
- (R_MMU_CONFIG__seg_4__##f16_##_VAL(R_MMU_CONFIG_, seg_4_, v16) << R_MMU_CONFIG__seg_4__BITNR) | \
- (R_MMU_CONFIG__seg_3__##f17_##_VAL(R_MMU_CONFIG_, seg_3_, v17) << R_MMU_CONFIG__seg_3__BITNR) | \
- (R_MMU_CONFIG__seg_2__##f18_##_VAL(R_MMU_CONFIG_, seg_2_, v18) << R_MMU_CONFIG__seg_2__BITNR) | \
- (R_MMU_CONFIG__seg_1__##f19_##_VAL(R_MMU_CONFIG_, seg_1_, v19) << R_MMU_CONFIG__seg_1__BITNR) | \
- (R_MMU_CONFIG__seg_0__##f20_##_VAL(R_MMU_CONFIG_, seg_0_, v20) << R_MMU_CONFIG__seg_0__BITNR) \
-)
-
-#endif
-
-/*
- * R_MMU_CONTEXT
- * - type: RW
- * - addr: 0xb000024c
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_CONTEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_CONTEXT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_MMU_CONTEXT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_CONTEXT(f1,v1) ( \
- R_MMU_CONTEXT__WRITE(R_MMU_CONTEXT__ADDR, ( \
- REG_VAL__R_MMU_CONTEXT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_MMU_CONTEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_MMU_CONTEXT(f1,v1) ( \
- (R_MMU_CONTEXT__page_id__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_CONTEXT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_CONTEXT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_CONTEXT(f1,v1) ( \
- (R_MMU_CONTEXT__page_id__##f1##__VAL(R_MMU_CONTEXT_, page_id_, v1) << R_MMU_CONTEXT__page_id__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_CONTEXT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_CONTEXT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_CONTEXT_(f1_,v1) ( \
- (R_MMU_CONTEXT__page_id__##f1_##_VAL(R_MMU_CONTEXT_, page_id_, v1) << R_MMU_CONTEXT__page_id__BITNR) \
-)
-
-#endif
-
-/*
- * R_MMU_CTRL
- * - type: WO
- * - addr: 0xb0000242
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_MMU_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_CTRL(f1,v1,f2,v2,f3,v3) ( \
- *R_MMU_CTRL__SADDR = ( \
- REG_INITIATED(R_MMU_CTRL_) \
- REG_VAL__R_MMU_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ), \
- R_MMU_CTRL__WRITE(R_MMU_CTRL__ADDR, *R_MMU_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_MMU_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_CTRL__SHADOW(f1,v1,f2,v2,f3,v3) ( \
- *R_MMU_CTRL__SADDR = ( \
- REG_INITIATED(R_MMU_CTRL_) \
- REG_VAL__R_MMU_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_MMU_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_MMU_CTRL(f1,v1,f2,v2,f3,v3) ( \
- (R_MMU_CTRL__inv_excp__##f1##__MASK & REG__##v1) | \
- (R_MMU_CTRL__acc_excp__##f2##__MASK & REG__##v2) | \
- (R_MMU_CTRL__we_excp__##f3##__MASK & REG__##v3) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_CTRL(f1,v1,f2,v2,f3,v3) ( \
- (R_MMU_CTRL__inv_excp__##f1##__VAL(R_MMU_CTRL_, inv_excp_, v1) << R_MMU_CTRL__inv_excp__BITNR) | \
- (R_MMU_CTRL__acc_excp__##f2##__VAL(R_MMU_CTRL_, acc_excp_, v2) << R_MMU_CTRL__acc_excp__BITNR) | \
- (R_MMU_CTRL__we_excp__##f3##__VAL(R_MMU_CTRL_, we_excp_, v3) << R_MMU_CTRL__we_excp__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_CTRL_(f1_,v1,f2_,v2,f3_,v3) ( \
- (R_MMU_CTRL__inv_excp__##f1_##_VAL(R_MMU_CTRL_, inv_excp_, v1) << R_MMU_CTRL__inv_excp__BITNR) | \
- (R_MMU_CTRL__acc_excp__##f2_##_VAL(R_MMU_CTRL_, acc_excp_, v2) << R_MMU_CTRL__acc_excp__BITNR) | \
- (R_MMU_CTRL__we_excp__##f3_##_VAL(R_MMU_CTRL_, we_excp_, v3) << R_MMU_CTRL__we_excp__BITNR) \
-)
-
-#endif
-
-/*
- * R_MMU_ENABLE
- * - type: WO
- * - addr: 0xb0000243
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_ENABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_ENABLE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_MMU_ENABLE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_ENABLE(f1,v1) ( \
- *R_MMU_ENABLE__SADDR = ( \
- REG_INITIATED(R_MMU_ENABLE_) \
- REG_VAL__R_MMU_ENABLE_(f1##_,v1) \
- ), \
- R_MMU_ENABLE__WRITE(R_MMU_ENABLE__ADDR, *R_MMU_ENABLE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_ENABLE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_ENABLE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_MMU_ENABLE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_ENABLE__SHADOW(f1,v1) ( \
- *R_MMU_ENABLE__SADDR = ( \
- REG_INITIATED(R_MMU_ENABLE_) \
- REG_VAL__R_MMU_ENABLE_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_MMU_ENABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_MMU_ENABLE(f1,v1) ( \
- (R_MMU_ENABLE__mmu_enable__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_ENABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_ENABLE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_ENABLE(f1,v1) ( \
- (R_MMU_ENABLE__mmu_enable__##f1##__VAL(R_MMU_ENABLE_, mmu_enable_, v1) << R_MMU_ENABLE__mmu_enable__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_ENABLE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_ENABLE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_ENABLE_(f1_,v1) ( \
- (R_MMU_ENABLE__mmu_enable__##f1_##_VAL(R_MMU_ENABLE_, mmu_enable_, v1) << R_MMU_ENABLE__mmu_enable__BITNR) \
-)
-
-#endif
-
-/*
- * R_MMU_KBASE_HI
- * - type: WO
- * - addr: 0xb0000248
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_KBASE_HI
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_KBASE_HI.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_MMU_KBASE_HI.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_KBASE_HI(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_MMU_KBASE_HI__SADDR = ( \
- REG_INITIATED(R_MMU_KBASE_HI_) \
- REG_VAL__R_MMU_KBASE_HI_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_MMU_KBASE_HI__WRITE(R_MMU_KBASE_HI__ADDR, *R_MMU_KBASE_HI__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_KBASE_HI__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_KBASE_HI.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_MMU_KBASE_HI.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_KBASE_HI__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_MMU_KBASE_HI__SADDR = ( \
- REG_INITIATED(R_MMU_KBASE_HI_) \
- REG_VAL__R_MMU_KBASE_HI_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_MMU_KBASE_HI
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_MMU_KBASE_HI(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_MMU_KBASE_HI__base_f__##f1##__MASK & REG__##v1) | \
- (R_MMU_KBASE_HI__base_e__##f2##__MASK & REG__##v2) | \
- (R_MMU_KBASE_HI__base_d__##f3##__MASK & REG__##v3) | \
- (R_MMU_KBASE_HI__base_c__##f4##__MASK & REG__##v4) | \
- (R_MMU_KBASE_HI__base_b__##f5##__MASK & REG__##v5) | \
- (R_MMU_KBASE_HI__base_a__##f6##__MASK & REG__##v6) | \
- (R_MMU_KBASE_HI__base_9__##f7##__MASK & REG__##v7) | \
- (R_MMU_KBASE_HI__base_8__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_KBASE_HI
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_KBASE_HI.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_KBASE_HI(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_MMU_KBASE_HI__base_f__##f1##__VAL(R_MMU_KBASE_HI_, base_f_, v1) << R_MMU_KBASE_HI__base_f__BITNR) | \
- (R_MMU_KBASE_HI__base_e__##f2##__VAL(R_MMU_KBASE_HI_, base_e_, v2) << R_MMU_KBASE_HI__base_e__BITNR) | \
- (R_MMU_KBASE_HI__base_d__##f3##__VAL(R_MMU_KBASE_HI_, base_d_, v3) << R_MMU_KBASE_HI__base_d__BITNR) | \
- (R_MMU_KBASE_HI__base_c__##f4##__VAL(R_MMU_KBASE_HI_, base_c_, v4) << R_MMU_KBASE_HI__base_c__BITNR) | \
- (R_MMU_KBASE_HI__base_b__##f5##__VAL(R_MMU_KBASE_HI_, base_b_, v5) << R_MMU_KBASE_HI__base_b__BITNR) | \
- (R_MMU_KBASE_HI__base_a__##f6##__VAL(R_MMU_KBASE_HI_, base_a_, v6) << R_MMU_KBASE_HI__base_a__BITNR) | \
- (R_MMU_KBASE_HI__base_9__##f7##__VAL(R_MMU_KBASE_HI_, base_9_, v7) << R_MMU_KBASE_HI__base_9__BITNR) | \
- (R_MMU_KBASE_HI__base_8__##f8##__VAL(R_MMU_KBASE_HI_, base_8_, v8) << R_MMU_KBASE_HI__base_8__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_KBASE_HI_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_KBASE_HI.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_KBASE_HI_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_MMU_KBASE_HI__base_f__##f1_##_VAL(R_MMU_KBASE_HI_, base_f_, v1) << R_MMU_KBASE_HI__base_f__BITNR) | \
- (R_MMU_KBASE_HI__base_e__##f2_##_VAL(R_MMU_KBASE_HI_, base_e_, v2) << R_MMU_KBASE_HI__base_e__BITNR) | \
- (R_MMU_KBASE_HI__base_d__##f3_##_VAL(R_MMU_KBASE_HI_, base_d_, v3) << R_MMU_KBASE_HI__base_d__BITNR) | \
- (R_MMU_KBASE_HI__base_c__##f4_##_VAL(R_MMU_KBASE_HI_, base_c_, v4) << R_MMU_KBASE_HI__base_c__BITNR) | \
- (R_MMU_KBASE_HI__base_b__##f5_##_VAL(R_MMU_KBASE_HI_, base_b_, v5) << R_MMU_KBASE_HI__base_b__BITNR) | \
- (R_MMU_KBASE_HI__base_a__##f6_##_VAL(R_MMU_KBASE_HI_, base_a_, v6) << R_MMU_KBASE_HI__base_a__BITNR) | \
- (R_MMU_KBASE_HI__base_9__##f7_##_VAL(R_MMU_KBASE_HI_, base_9_, v7) << R_MMU_KBASE_HI__base_9__BITNR) | \
- (R_MMU_KBASE_HI__base_8__##f8_##_VAL(R_MMU_KBASE_HI_, base_8_, v8) << R_MMU_KBASE_HI__base_8__BITNR) \
-)
-
-#endif
-
-/*
- * R_MMU_KBASE_LO
- * - type: WO
- * - addr: 0xb0000244
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_KBASE_LO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_KBASE_LO.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_MMU_KBASE_LO.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_KBASE_LO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_MMU_KBASE_LO__SADDR = ( \
- REG_INITIATED(R_MMU_KBASE_LO_) \
- REG_VAL__R_MMU_KBASE_LO_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_MMU_KBASE_LO__WRITE(R_MMU_KBASE_LO__ADDR, *R_MMU_KBASE_LO__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_KBASE_LO__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_KBASE_LO.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_MMU_KBASE_LO.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_KBASE_LO__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_MMU_KBASE_LO__SADDR = ( \
- REG_INITIATED(R_MMU_KBASE_LO_) \
- REG_VAL__R_MMU_KBASE_LO_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_MMU_KBASE_LO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_MMU_KBASE_LO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_MMU_KBASE_LO__base_7__##f1##__MASK & REG__##v1) | \
- (R_MMU_KBASE_LO__base_6__##f2##__MASK & REG__##v2) | \
- (R_MMU_KBASE_LO__base_5__##f3##__MASK & REG__##v3) | \
- (R_MMU_KBASE_LO__base_4__##f4##__MASK & REG__##v4) | \
- (R_MMU_KBASE_LO__base_3__##f5##__MASK & REG__##v5) | \
- (R_MMU_KBASE_LO__base_2__##f6##__MASK & REG__##v6) | \
- (R_MMU_KBASE_LO__base_1__##f7##__MASK & REG__##v7) | \
- (R_MMU_KBASE_LO__base_0__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_KBASE_LO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_KBASE_LO.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_KBASE_LO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_MMU_KBASE_LO__base_7__##f1##__VAL(R_MMU_KBASE_LO_, base_7_, v1) << R_MMU_KBASE_LO__base_7__BITNR) | \
- (R_MMU_KBASE_LO__base_6__##f2##__VAL(R_MMU_KBASE_LO_, base_6_, v2) << R_MMU_KBASE_LO__base_6__BITNR) | \
- (R_MMU_KBASE_LO__base_5__##f3##__VAL(R_MMU_KBASE_LO_, base_5_, v3) << R_MMU_KBASE_LO__base_5__BITNR) | \
- (R_MMU_KBASE_LO__base_4__##f4##__VAL(R_MMU_KBASE_LO_, base_4_, v4) << R_MMU_KBASE_LO__base_4__BITNR) | \
- (R_MMU_KBASE_LO__base_3__##f5##__VAL(R_MMU_KBASE_LO_, base_3_, v5) << R_MMU_KBASE_LO__base_3__BITNR) | \
- (R_MMU_KBASE_LO__base_2__##f6##__VAL(R_MMU_KBASE_LO_, base_2_, v6) << R_MMU_KBASE_LO__base_2__BITNR) | \
- (R_MMU_KBASE_LO__base_1__##f7##__VAL(R_MMU_KBASE_LO_, base_1_, v7) << R_MMU_KBASE_LO__base_1__BITNR) | \
- (R_MMU_KBASE_LO__base_0__##f8##__VAL(R_MMU_KBASE_LO_, base_0_, v8) << R_MMU_KBASE_LO__base_0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_KBASE_LO_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_KBASE_LO.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_KBASE_LO_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_MMU_KBASE_LO__base_7__##f1_##_VAL(R_MMU_KBASE_LO_, base_7_, v1) << R_MMU_KBASE_LO__base_7__BITNR) | \
- (R_MMU_KBASE_LO__base_6__##f2_##_VAL(R_MMU_KBASE_LO_, base_6_, v2) << R_MMU_KBASE_LO__base_6__BITNR) | \
- (R_MMU_KBASE_LO__base_5__##f3_##_VAL(R_MMU_KBASE_LO_, base_5_, v3) << R_MMU_KBASE_LO__base_5__BITNR) | \
- (R_MMU_KBASE_LO__base_4__##f4_##_VAL(R_MMU_KBASE_LO_, base_4_, v4) << R_MMU_KBASE_LO__base_4__BITNR) | \
- (R_MMU_KBASE_LO__base_3__##f5_##_VAL(R_MMU_KBASE_LO_, base_3_, v5) << R_MMU_KBASE_LO__base_3__BITNR) | \
- (R_MMU_KBASE_LO__base_2__##f6_##_VAL(R_MMU_KBASE_LO_, base_2_, v6) << R_MMU_KBASE_LO__base_2__BITNR) | \
- (R_MMU_KBASE_LO__base_1__##f7_##_VAL(R_MMU_KBASE_LO_, base_1_, v7) << R_MMU_KBASE_LO__base_1__BITNR) | \
- (R_MMU_KBASE_LO__base_0__##f8_##_VAL(R_MMU_KBASE_LO_, base_0_, v8) << R_MMU_KBASE_LO__base_0__BITNR) \
-)
-
-#endif
-
-/*
- * R_MMU_KSEG
- * - type: WO
- * - addr: 0xb0000240
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_KSEG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_KSEG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_MMU_KSEG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_KSEG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16) ( \
- *R_MMU_KSEG__SADDR = ( \
- REG_INITIATED(R_MMU_KSEG_) \
- REG_VAL__R_MMU_KSEG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16) \
- ), \
- R_MMU_KSEG__WRITE(R_MMU_KSEG__ADDR, *R_MMU_KSEG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_MMU_KSEG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_MMU_KSEG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_MMU_KSEG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_MMU_KSEG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16) ( \
- *R_MMU_KSEG__SADDR = ( \
- REG_INITIATED(R_MMU_KSEG_) \
- REG_VAL__R_MMU_KSEG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_MMU_KSEG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_MMU_KSEG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16) ( \
- (R_MMU_KSEG__seg_f__##f1##__MASK & REG__##v1) | \
- (R_MMU_KSEG__seg_e__##f2##__MASK & REG__##v2) | \
- (R_MMU_KSEG__seg_d__##f3##__MASK & REG__##v3) | \
- (R_MMU_KSEG__seg_c__##f4##__MASK & REG__##v4) | \
- (R_MMU_KSEG__seg_b__##f5##__MASK & REG__##v5) | \
- (R_MMU_KSEG__seg_a__##f6##__MASK & REG__##v6) | \
- (R_MMU_KSEG__seg_9__##f7##__MASK & REG__##v7) | \
- (R_MMU_KSEG__seg_8__##f8##__MASK & REG__##v8) | \
- (R_MMU_KSEG__seg_7__##f9##__MASK & REG__##v9) | \
- (R_MMU_KSEG__seg_6__##f10##__MASK & REG__##v10) | \
- (R_MMU_KSEG__seg_5__##f11##__MASK & REG__##v11) | \
- (R_MMU_KSEG__seg_4__##f12##__MASK & REG__##v12) | \
- (R_MMU_KSEG__seg_3__##f13##__MASK & REG__##v13) | \
- (R_MMU_KSEG__seg_2__##f14##__MASK & REG__##v14) | \
- (R_MMU_KSEG__seg_1__##f15##__MASK & REG__##v15) | \
- (R_MMU_KSEG__seg_0__##f16##__MASK & REG__##v16) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_KSEG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_KSEG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_KSEG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16) ( \
- (R_MMU_KSEG__seg_f__##f1##__VAL(R_MMU_KSEG_, seg_f_, v1) << R_MMU_KSEG__seg_f__BITNR) | \
- (R_MMU_KSEG__seg_e__##f2##__VAL(R_MMU_KSEG_, seg_e_, v2) << R_MMU_KSEG__seg_e__BITNR) | \
- (R_MMU_KSEG__seg_d__##f3##__VAL(R_MMU_KSEG_, seg_d_, v3) << R_MMU_KSEG__seg_d__BITNR) | \
- (R_MMU_KSEG__seg_c__##f4##__VAL(R_MMU_KSEG_, seg_c_, v4) << R_MMU_KSEG__seg_c__BITNR) | \
- (R_MMU_KSEG__seg_b__##f5##__VAL(R_MMU_KSEG_, seg_b_, v5) << R_MMU_KSEG__seg_b__BITNR) | \
- (R_MMU_KSEG__seg_a__##f6##__VAL(R_MMU_KSEG_, seg_a_, v6) << R_MMU_KSEG__seg_a__BITNR) | \
- (R_MMU_KSEG__seg_9__##f7##__VAL(R_MMU_KSEG_, seg_9_, v7) << R_MMU_KSEG__seg_9__BITNR) | \
- (R_MMU_KSEG__seg_8__##f8##__VAL(R_MMU_KSEG_, seg_8_, v8) << R_MMU_KSEG__seg_8__BITNR) | \
- (R_MMU_KSEG__seg_7__##f9##__VAL(R_MMU_KSEG_, seg_7_, v9) << R_MMU_KSEG__seg_7__BITNR) | \
- (R_MMU_KSEG__seg_6__##f10##__VAL(R_MMU_KSEG_, seg_6_, v10) << R_MMU_KSEG__seg_6__BITNR) | \
- (R_MMU_KSEG__seg_5__##f11##__VAL(R_MMU_KSEG_, seg_5_, v11) << R_MMU_KSEG__seg_5__BITNR) | \
- (R_MMU_KSEG__seg_4__##f12##__VAL(R_MMU_KSEG_, seg_4_, v12) << R_MMU_KSEG__seg_4__BITNR) | \
- (R_MMU_KSEG__seg_3__##f13##__VAL(R_MMU_KSEG_, seg_3_, v13) << R_MMU_KSEG__seg_3__BITNR) | \
- (R_MMU_KSEG__seg_2__##f14##__VAL(R_MMU_KSEG_, seg_2_, v14) << R_MMU_KSEG__seg_2__BITNR) | \
- (R_MMU_KSEG__seg_1__##f15##__VAL(R_MMU_KSEG_, seg_1_, v15) << R_MMU_KSEG__seg_1__BITNR) | \
- (R_MMU_KSEG__seg_0__##f16##__VAL(R_MMU_KSEG_, seg_0_, v16) << R_MMU_KSEG__seg_0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_MMU_KSEG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_MMU_KSEG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_MMU_KSEG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16) ( \
- (R_MMU_KSEG__seg_f__##f1_##_VAL(R_MMU_KSEG_, seg_f_, v1) << R_MMU_KSEG__seg_f__BITNR) | \
- (R_MMU_KSEG__seg_e__##f2_##_VAL(R_MMU_KSEG_, seg_e_, v2) << R_MMU_KSEG__seg_e__BITNR) | \
- (R_MMU_KSEG__seg_d__##f3_##_VAL(R_MMU_KSEG_, seg_d_, v3) << R_MMU_KSEG__seg_d__BITNR) | \
- (R_MMU_KSEG__seg_c__##f4_##_VAL(R_MMU_KSEG_, seg_c_, v4) << R_MMU_KSEG__seg_c__BITNR) | \
- (R_MMU_KSEG__seg_b__##f5_##_VAL(R_MMU_KSEG_, seg_b_, v5) << R_MMU_KSEG__seg_b__BITNR) | \
- (R_MMU_KSEG__seg_a__##f6_##_VAL(R_MMU_KSEG_, seg_a_, v6) << R_MMU_KSEG__seg_a__BITNR) | \
- (R_MMU_KSEG__seg_9__##f7_##_VAL(R_MMU_KSEG_, seg_9_, v7) << R_MMU_KSEG__seg_9__BITNR) | \
- (R_MMU_KSEG__seg_8__##f8_##_VAL(R_MMU_KSEG_, seg_8_, v8) << R_MMU_KSEG__seg_8__BITNR) | \
- (R_MMU_KSEG__seg_7__##f9_##_VAL(R_MMU_KSEG_, seg_7_, v9) << R_MMU_KSEG__seg_7__BITNR) | \
- (R_MMU_KSEG__seg_6__##f10_##_VAL(R_MMU_KSEG_, seg_6_, v10) << R_MMU_KSEG__seg_6__BITNR) | \
- (R_MMU_KSEG__seg_5__##f11_##_VAL(R_MMU_KSEG_, seg_5_, v11) << R_MMU_KSEG__seg_5__BITNR) | \
- (R_MMU_KSEG__seg_4__##f12_##_VAL(R_MMU_KSEG_, seg_4_, v12) << R_MMU_KSEG__seg_4__BITNR) | \
- (R_MMU_KSEG__seg_3__##f13_##_VAL(R_MMU_KSEG_, seg_3_, v13) << R_MMU_KSEG__seg_3__BITNR) | \
- (R_MMU_KSEG__seg_2__##f14_##_VAL(R_MMU_KSEG_, seg_2_, v14) << R_MMU_KSEG__seg_2__BITNR) | \
- (R_MMU_KSEG__seg_1__##f15_##_VAL(R_MMU_KSEG_, seg_1_, v15) << R_MMU_KSEG__seg_1__BITNR) | \
- (R_MMU_KSEG__seg_0__##f16_##_VAL(R_MMU_KSEG_, seg_0_, v16) << R_MMU_KSEG__seg_0__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_GA_0
- * - type: WO
- * - addr: 0xb000008c
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_GA_0
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_GA_0.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_GA_0.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_GA_0(f1,v1) ( \
- *R_NETWORK_GA_0__SADDR = ( \
- REG_INITIATED(R_NETWORK_GA_0_) \
- REG_VAL__R_NETWORK_GA_0_(f1##_,v1) \
- ), \
- R_NETWORK_GA_0__WRITE(R_NETWORK_GA_0__ADDR, *R_NETWORK_GA_0__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_GA_0__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_GA_0.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_GA_0.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_GA_0__SHADOW(f1,v1) ( \
- *R_NETWORK_GA_0__SADDR = ( \
- REG_INITIATED(R_NETWORK_GA_0_) \
- REG_VAL__R_NETWORK_GA_0_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_GA_0
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_GA_0(f1,v1) ( \
- (R_NETWORK_GA_0__ga_low__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_GA_0
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_GA_0.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_GA_0(f1,v1) ( \
- (R_NETWORK_GA_0__ga_low__##f1##__VAL(R_NETWORK_GA_0_, ga_low_, v1) << R_NETWORK_GA_0__ga_low__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_GA_0_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_GA_0.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_GA_0_(f1_,v1) ( \
- (R_NETWORK_GA_0__ga_low__##f1_##_VAL(R_NETWORK_GA_0_, ga_low_, v1) << R_NETWORK_GA_0__ga_low__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_GA_1
- * - type: WO
- * - addr: 0xb0000090
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_GA_1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_GA_1.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_GA_1.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_GA_1(f1,v1) ( \
- *R_NETWORK_GA_1__SADDR = ( \
- REG_INITIATED(R_NETWORK_GA_1_) \
- REG_VAL__R_NETWORK_GA_1_(f1##_,v1) \
- ), \
- R_NETWORK_GA_1__WRITE(R_NETWORK_GA_1__ADDR, *R_NETWORK_GA_1__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_GA_1__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_GA_1.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_GA_1.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_GA_1__SHADOW(f1,v1) ( \
- *R_NETWORK_GA_1__SADDR = ( \
- REG_INITIATED(R_NETWORK_GA_1_) \
- REG_VAL__R_NETWORK_GA_1_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_GA_1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_GA_1(f1,v1) ( \
- (R_NETWORK_GA_1__ga_high__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_GA_1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_GA_1.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_GA_1(f1,v1) ( \
- (R_NETWORK_GA_1__ga_high__##f1##__VAL(R_NETWORK_GA_1_, ga_high_, v1) << R_NETWORK_GA_1__ga_high__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_GA_1_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_GA_1.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_GA_1_(f1_,v1) ( \
- (R_NETWORK_GA_1__ga_high__##f1_##_VAL(R_NETWORK_GA_1_, ga_high_, v1) << R_NETWORK_GA_1__ga_high__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_GEN_CONFIG
- * - type: WO
- * - addr: 0xb0000098
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_GEN_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_GEN_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_GEN_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_GEN_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- *R_NETWORK_GEN_CONFIG__SADDR = ( \
- REG_INITIATED(R_NETWORK_GEN_CONFIG_) \
- REG_VAL__R_NETWORK_GEN_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5) \
- ), \
- R_NETWORK_GEN_CONFIG__WRITE(R_NETWORK_GEN_CONFIG__ADDR, *R_NETWORK_GEN_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_GEN_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_GEN_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_GEN_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_GEN_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- *R_NETWORK_GEN_CONFIG__SADDR = ( \
- REG_INITIATED(R_NETWORK_GEN_CONFIG_) \
- REG_VAL__R_NETWORK_GEN_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_GEN_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_GEN_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_NETWORK_GEN_CONFIG__loopback__##f1##__MASK & REG__##v1) | \
- (R_NETWORK_GEN_CONFIG__frame__##f2##__MASK & REG__##v2) | \
- (R_NETWORK_GEN_CONFIG__vg__##f3##__MASK & REG__##v3) | \
- (R_NETWORK_GEN_CONFIG__phy__##f4##__MASK & REG__##v4) | \
- (R_NETWORK_GEN_CONFIG__enable__##f5##__MASK & REG__##v5) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_GEN_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_GEN_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_GEN_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_NETWORK_GEN_CONFIG__loopback__##f1##__VAL(R_NETWORK_GEN_CONFIG_, loopback_, v1) << R_NETWORK_GEN_CONFIG__loopback__BITNR) | \
- (R_NETWORK_GEN_CONFIG__frame__##f2##__VAL(R_NETWORK_GEN_CONFIG_, frame_, v2) << R_NETWORK_GEN_CONFIG__frame__BITNR) | \
- (R_NETWORK_GEN_CONFIG__vg__##f3##__VAL(R_NETWORK_GEN_CONFIG_, vg_, v3) << R_NETWORK_GEN_CONFIG__vg__BITNR) | \
- (R_NETWORK_GEN_CONFIG__phy__##f4##__VAL(R_NETWORK_GEN_CONFIG_, phy_, v4) << R_NETWORK_GEN_CONFIG__phy__BITNR) | \
- (R_NETWORK_GEN_CONFIG__enable__##f5##__VAL(R_NETWORK_GEN_CONFIG_, enable_, v5) << R_NETWORK_GEN_CONFIG__enable__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_GEN_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_GEN_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_GEN_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5) ( \
- (R_NETWORK_GEN_CONFIG__loopback__##f1_##_VAL(R_NETWORK_GEN_CONFIG_, loopback_, v1) << R_NETWORK_GEN_CONFIG__loopback__BITNR) | \
- (R_NETWORK_GEN_CONFIG__frame__##f2_##_VAL(R_NETWORK_GEN_CONFIG_, frame_, v2) << R_NETWORK_GEN_CONFIG__frame__BITNR) | \
- (R_NETWORK_GEN_CONFIG__vg__##f3_##_VAL(R_NETWORK_GEN_CONFIG_, vg_, v3) << R_NETWORK_GEN_CONFIG__vg__BITNR) | \
- (R_NETWORK_GEN_CONFIG__phy__##f4_##_VAL(R_NETWORK_GEN_CONFIG_, phy_, v4) << R_NETWORK_GEN_CONFIG__phy__BITNR) | \
- (R_NETWORK_GEN_CONFIG__enable__##f5_##_VAL(R_NETWORK_GEN_CONFIG_, enable_, v5) << R_NETWORK_GEN_CONFIG__enable__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_MGM_CTRL
- * - type: WO
- * - addr: 0xb00000a0
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_MGM_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_MGM_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_MGM_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_MGM_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- *R_NETWORK_MGM_CTRL__SADDR = ( \
- REG_INITIATED(R_NETWORK_MGM_CTRL_) \
- REG_VAL__R_NETWORK_MGM_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5) \
- ), \
- R_NETWORK_MGM_CTRL__WRITE(R_NETWORK_MGM_CTRL__ADDR, *R_NETWORK_MGM_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_MGM_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_MGM_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_MGM_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_MGM_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- *R_NETWORK_MGM_CTRL__SADDR = ( \
- REG_INITIATED(R_NETWORK_MGM_CTRL_) \
- REG_VAL__R_NETWORK_MGM_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_MGM_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_MGM_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_NETWORK_MGM_CTRL__txd_pins__##f1##__MASK & REG__##v1) | \
- (R_NETWORK_MGM_CTRL__txer_pin__##f2##__MASK & REG__##v2) | \
- (R_NETWORK_MGM_CTRL__mdck__##f3##__MASK & REG__##v3) | \
- (R_NETWORK_MGM_CTRL__mdoe__##f4##__MASK & REG__##v4) | \
- (R_NETWORK_MGM_CTRL__mdio__##f5##__MASK & REG__##v5) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_MGM_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_MGM_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_MGM_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_NETWORK_MGM_CTRL__txd_pins__##f1##__VAL(R_NETWORK_MGM_CTRL_, txd_pins_, v1) << R_NETWORK_MGM_CTRL__txd_pins__BITNR) | \
- (R_NETWORK_MGM_CTRL__txer_pin__##f2##__VAL(R_NETWORK_MGM_CTRL_, txer_pin_, v2) << R_NETWORK_MGM_CTRL__txer_pin__BITNR) | \
- (R_NETWORK_MGM_CTRL__mdck__##f3##__VAL(R_NETWORK_MGM_CTRL_, mdck_, v3) << R_NETWORK_MGM_CTRL__mdck__BITNR) | \
- (R_NETWORK_MGM_CTRL__mdoe__##f4##__VAL(R_NETWORK_MGM_CTRL_, mdoe_, v4) << R_NETWORK_MGM_CTRL__mdoe__BITNR) | \
- (R_NETWORK_MGM_CTRL__mdio__##f5##__VAL(R_NETWORK_MGM_CTRL_, mdio_, v5) << R_NETWORK_MGM_CTRL__mdio__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_MGM_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_MGM_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_MGM_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5) ( \
- (R_NETWORK_MGM_CTRL__txd_pins__##f1_##_VAL(R_NETWORK_MGM_CTRL_, txd_pins_, v1) << R_NETWORK_MGM_CTRL__txd_pins__BITNR) | \
- (R_NETWORK_MGM_CTRL__txer_pin__##f2_##_VAL(R_NETWORK_MGM_CTRL_, txer_pin_, v2) << R_NETWORK_MGM_CTRL__txer_pin__BITNR) | \
- (R_NETWORK_MGM_CTRL__mdck__##f3_##_VAL(R_NETWORK_MGM_CTRL_, mdck_, v3) << R_NETWORK_MGM_CTRL__mdck__BITNR) | \
- (R_NETWORK_MGM_CTRL__mdoe__##f4_##_VAL(R_NETWORK_MGM_CTRL_, mdoe_, v4) << R_NETWORK_MGM_CTRL__mdoe__BITNR) | \
- (R_NETWORK_MGM_CTRL__mdio__##f5_##_VAL(R_NETWORK_MGM_CTRL_, mdio_, v5) << R_NETWORK_MGM_CTRL__mdio__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_REC_CONFIG
- * - type: WO
- * - addr: 0xb0000094
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_REC_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_REC_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_REC_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_REC_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- *R_NETWORK_REC_CONFIG__SADDR = ( \
- REG_INITIATED(R_NETWORK_REC_CONFIG_) \
- REG_VAL__R_NETWORK_REC_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11) \
- ), \
- R_NETWORK_REC_CONFIG__WRITE(R_NETWORK_REC_CONFIG__ADDR, *R_NETWORK_REC_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_REC_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_REC_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_REC_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_REC_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- *R_NETWORK_REC_CONFIG__SADDR = ( \
- REG_INITIATED(R_NETWORK_REC_CONFIG_) \
- REG_VAL__R_NETWORK_REC_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_REC_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_REC_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- (R_NETWORK_REC_CONFIG__max_size__##f1##__MASK & REG__##v1) | \
- (R_NETWORK_REC_CONFIG__duplex__##f2##__MASK & REG__##v2) | \
- (R_NETWORK_REC_CONFIG__bad_crc__##f3##__MASK & REG__##v3) | \
- (R_NETWORK_REC_CONFIG__oversize__##f4##__MASK & REG__##v4) | \
- (R_NETWORK_REC_CONFIG__undersize__##f5##__MASK & REG__##v5) | \
- (R_NETWORK_REC_CONFIG__all_roots__##f6##__MASK & REG__##v6) | \
- (R_NETWORK_REC_CONFIG__tr_broadcast__##f7##__MASK & REG__##v7) | \
- (R_NETWORK_REC_CONFIG__broadcast__##f8##__MASK & REG__##v8) | \
- (R_NETWORK_REC_CONFIG__individual__##f9##__MASK & REG__##v9) | \
- (R_NETWORK_REC_CONFIG__ma1__##f10##__MASK & REG__##v10) | \
- (R_NETWORK_REC_CONFIG__ma0__##f11##__MASK & REG__##v11) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_REC_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_REC_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_REC_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- (R_NETWORK_REC_CONFIG__max_size__##f1##__VAL(R_NETWORK_REC_CONFIG_, max_size_, v1) << R_NETWORK_REC_CONFIG__max_size__BITNR) | \
- (R_NETWORK_REC_CONFIG__duplex__##f2##__VAL(R_NETWORK_REC_CONFIG_, duplex_, v2) << R_NETWORK_REC_CONFIG__duplex__BITNR) | \
- (R_NETWORK_REC_CONFIG__bad_crc__##f3##__VAL(R_NETWORK_REC_CONFIG_, bad_crc_, v3) << R_NETWORK_REC_CONFIG__bad_crc__BITNR) | \
- (R_NETWORK_REC_CONFIG__oversize__##f4##__VAL(R_NETWORK_REC_CONFIG_, oversize_, v4) << R_NETWORK_REC_CONFIG__oversize__BITNR) | \
- (R_NETWORK_REC_CONFIG__undersize__##f5##__VAL(R_NETWORK_REC_CONFIG_, undersize_, v5) << R_NETWORK_REC_CONFIG__undersize__BITNR) | \
- (R_NETWORK_REC_CONFIG__all_roots__##f6##__VAL(R_NETWORK_REC_CONFIG_, all_roots_, v6) << R_NETWORK_REC_CONFIG__all_roots__BITNR) | \
- (R_NETWORK_REC_CONFIG__tr_broadcast__##f7##__VAL(R_NETWORK_REC_CONFIG_, tr_broadcast_, v7) << R_NETWORK_REC_CONFIG__tr_broadcast__BITNR) | \
- (R_NETWORK_REC_CONFIG__broadcast__##f8##__VAL(R_NETWORK_REC_CONFIG_, broadcast_, v8) << R_NETWORK_REC_CONFIG__broadcast__BITNR) | \
- (R_NETWORK_REC_CONFIG__individual__##f9##__VAL(R_NETWORK_REC_CONFIG_, individual_, v9) << R_NETWORK_REC_CONFIG__individual__BITNR) | \
- (R_NETWORK_REC_CONFIG__ma1__##f10##__VAL(R_NETWORK_REC_CONFIG_, ma1_, v10) << R_NETWORK_REC_CONFIG__ma1__BITNR) | \
- (R_NETWORK_REC_CONFIG__ma0__##f11##__VAL(R_NETWORK_REC_CONFIG_, ma0_, v11) << R_NETWORK_REC_CONFIG__ma0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_REC_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_REC_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_REC_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11) ( \
- (R_NETWORK_REC_CONFIG__max_size__##f1_##_VAL(R_NETWORK_REC_CONFIG_, max_size_, v1) << R_NETWORK_REC_CONFIG__max_size__BITNR) | \
- (R_NETWORK_REC_CONFIG__duplex__##f2_##_VAL(R_NETWORK_REC_CONFIG_, duplex_, v2) << R_NETWORK_REC_CONFIG__duplex__BITNR) | \
- (R_NETWORK_REC_CONFIG__bad_crc__##f3_##_VAL(R_NETWORK_REC_CONFIG_, bad_crc_, v3) << R_NETWORK_REC_CONFIG__bad_crc__BITNR) | \
- (R_NETWORK_REC_CONFIG__oversize__##f4_##_VAL(R_NETWORK_REC_CONFIG_, oversize_, v4) << R_NETWORK_REC_CONFIG__oversize__BITNR) | \
- (R_NETWORK_REC_CONFIG__undersize__##f5_##_VAL(R_NETWORK_REC_CONFIG_, undersize_, v5) << R_NETWORK_REC_CONFIG__undersize__BITNR) | \
- (R_NETWORK_REC_CONFIG__all_roots__##f6_##_VAL(R_NETWORK_REC_CONFIG_, all_roots_, v6) << R_NETWORK_REC_CONFIG__all_roots__BITNR) | \
- (R_NETWORK_REC_CONFIG__tr_broadcast__##f7_##_VAL(R_NETWORK_REC_CONFIG_, tr_broadcast_, v7) << R_NETWORK_REC_CONFIG__tr_broadcast__BITNR) | \
- (R_NETWORK_REC_CONFIG__broadcast__##f8_##_VAL(R_NETWORK_REC_CONFIG_, broadcast_, v8) << R_NETWORK_REC_CONFIG__broadcast__BITNR) | \
- (R_NETWORK_REC_CONFIG__individual__##f9_##_VAL(R_NETWORK_REC_CONFIG_, individual_, v9) << R_NETWORK_REC_CONFIG__individual__BITNR) | \
- (R_NETWORK_REC_CONFIG__ma1__##f10_##_VAL(R_NETWORK_REC_CONFIG_, ma1_, v10) << R_NETWORK_REC_CONFIG__ma1__BITNR) | \
- (R_NETWORK_REC_CONFIG__ma0__##f11_##_VAL(R_NETWORK_REC_CONFIG_, ma0_, v11) << R_NETWORK_REC_CONFIG__ma0__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_SA_0
- * - type: WO
- * - addr: 0xb0000080
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_SA_0
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_SA_0.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_SA_0.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_SA_0(f1,v1) ( \
- *R_NETWORK_SA_0__SADDR = ( \
- REG_INITIATED(R_NETWORK_SA_0_) \
- REG_VAL__R_NETWORK_SA_0_(f1##_,v1) \
- ), \
- R_NETWORK_SA_0__WRITE(R_NETWORK_SA_0__ADDR, *R_NETWORK_SA_0__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_SA_0__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_SA_0.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_SA_0.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_SA_0__SHADOW(f1,v1) ( \
- *R_NETWORK_SA_0__SADDR = ( \
- REG_INITIATED(R_NETWORK_SA_0_) \
- REG_VAL__R_NETWORK_SA_0_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_SA_0
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_SA_0(f1,v1) ( \
- (R_NETWORK_SA_0__ma0_low__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_SA_0
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_SA_0.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_SA_0(f1,v1) ( \
- (R_NETWORK_SA_0__ma0_low__##f1##__VAL(R_NETWORK_SA_0_, ma0_low_, v1) << R_NETWORK_SA_0__ma0_low__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_SA_0_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_SA_0.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_SA_0_(f1_,v1) ( \
- (R_NETWORK_SA_0__ma0_low__##f1_##_VAL(R_NETWORK_SA_0_, ma0_low_, v1) << R_NETWORK_SA_0__ma0_low__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_SA_1
- * - type: WO
- * - addr: 0xb0000084
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_SA_1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_SA_1.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_SA_1.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_SA_1(f1,v1,f2,v2) ( \
- *R_NETWORK_SA_1__SADDR = ( \
- REG_INITIATED(R_NETWORK_SA_1_) \
- REG_VAL__R_NETWORK_SA_1_(f1##_,v1,f2##_,v2) \
- ), \
- R_NETWORK_SA_1__WRITE(R_NETWORK_SA_1__ADDR, *R_NETWORK_SA_1__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_SA_1__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_SA_1.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_SA_1.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_SA_1__SHADOW(f1,v1,f2,v2) ( \
- *R_NETWORK_SA_1__SADDR = ( \
- REG_INITIATED(R_NETWORK_SA_1_) \
- REG_VAL__R_NETWORK_SA_1_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_SA_1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_SA_1(f1,v1,f2,v2) ( \
- (R_NETWORK_SA_1__ma1_low__##f1##__MASK & REG__##v1) | \
- (R_NETWORK_SA_1__ma0_high__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_SA_1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_SA_1.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_SA_1(f1,v1,f2,v2) ( \
- (R_NETWORK_SA_1__ma1_low__##f1##__VAL(R_NETWORK_SA_1_, ma1_low_, v1) << R_NETWORK_SA_1__ma1_low__BITNR) | \
- (R_NETWORK_SA_1__ma0_high__##f2##__VAL(R_NETWORK_SA_1_, ma0_high_, v2) << R_NETWORK_SA_1__ma0_high__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_SA_1_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_SA_1.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_SA_1_(f1_,v1,f2_,v2) ( \
- (R_NETWORK_SA_1__ma1_low__##f1_##_VAL(R_NETWORK_SA_1_, ma1_low_, v1) << R_NETWORK_SA_1__ma1_low__BITNR) | \
- (R_NETWORK_SA_1__ma0_high__##f2_##_VAL(R_NETWORK_SA_1_, ma0_high_, v2) << R_NETWORK_SA_1__ma0_high__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_SA_2
- * - type: WO
- * - addr: 0xb0000088
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_SA_2
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_SA_2.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_SA_2.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_SA_2(f1,v1) ( \
- *R_NETWORK_SA_2__SADDR = ( \
- REG_INITIATED(R_NETWORK_SA_2_) \
- REG_VAL__R_NETWORK_SA_2_(f1##_,v1) \
- ), \
- R_NETWORK_SA_2__WRITE(R_NETWORK_SA_2__ADDR, *R_NETWORK_SA_2__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_SA_2__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_SA_2.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_SA_2.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_SA_2__SHADOW(f1,v1) ( \
- *R_NETWORK_SA_2__SADDR = ( \
- REG_INITIATED(R_NETWORK_SA_2_) \
- REG_VAL__R_NETWORK_SA_2_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_SA_2
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_SA_2(f1,v1) ( \
- (R_NETWORK_SA_2__ma1_high__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_SA_2
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_SA_2.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_SA_2(f1,v1) ( \
- (R_NETWORK_SA_2__ma1_high__##f1##__VAL(R_NETWORK_SA_2_, ma1_high_, v1) << R_NETWORK_SA_2__ma1_high__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_SA_2_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_SA_2.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_SA_2_(f1_,v1) ( \
- (R_NETWORK_SA_2__ma1_high__##f1_##_VAL(R_NETWORK_SA_2_, ma1_high_, v1) << R_NETWORK_SA_2__ma1_high__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_STAT
- * - type: RO
- * - addr: 0xb00000a0
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_STAT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_STAT(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_NETWORK_STAT__rxd_pins__##f1##__MASK & REG__##v1) | \
- (R_NETWORK_STAT__rxer__##f2##__MASK & REG__##v2) | \
- (R_NETWORK_STAT__underrun__##f3##__MASK & REG__##v3) | \
- (R_NETWORK_STAT__exc_col__##f4##__MASK & REG__##v4) | \
- (R_NETWORK_STAT__mdio__##f5##__MASK & REG__##v5) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_STAT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_STAT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_STAT(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_NETWORK_STAT__rxd_pins__##f1##__VAL(R_NETWORK_STAT_, rxd_pins_, v1) << R_NETWORK_STAT__rxd_pins__BITNR) | \
- (R_NETWORK_STAT__rxer__##f2##__VAL(R_NETWORK_STAT_, rxer_, v2) << R_NETWORK_STAT__rxer__BITNR) | \
- (R_NETWORK_STAT__underrun__##f3##__VAL(R_NETWORK_STAT_, underrun_, v3) << R_NETWORK_STAT__underrun__BITNR) | \
- (R_NETWORK_STAT__exc_col__##f4##__VAL(R_NETWORK_STAT_, exc_col_, v4) << R_NETWORK_STAT__exc_col__BITNR) | \
- (R_NETWORK_STAT__mdio__##f5##__VAL(R_NETWORK_STAT_, mdio_, v5) << R_NETWORK_STAT__mdio__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_STAT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_STAT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_STAT_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5) ( \
- (R_NETWORK_STAT__rxd_pins__##f1_##_VAL(R_NETWORK_STAT_, rxd_pins_, v1) << R_NETWORK_STAT__rxd_pins__BITNR) | \
- (R_NETWORK_STAT__rxer__##f2_##_VAL(R_NETWORK_STAT_, rxer_, v2) << R_NETWORK_STAT__rxer__BITNR) | \
- (R_NETWORK_STAT__underrun__##f3_##_VAL(R_NETWORK_STAT_, underrun_, v3) << R_NETWORK_STAT__underrun__BITNR) | \
- (R_NETWORK_STAT__exc_col__##f4_##_VAL(R_NETWORK_STAT_, exc_col_, v4) << R_NETWORK_STAT__exc_col__BITNR) | \
- (R_NETWORK_STAT__mdio__##f5_##_VAL(R_NETWORK_STAT_, mdio_, v5) << R_NETWORK_STAT__mdio__BITNR) \
-)
-
-#endif
-
-/*
- * R_NETWORK_TR_CTRL
- * - type: WO
- * - addr: 0xb000009c
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_NETWORK_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- *R_NETWORK_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_NETWORK_TR_CTRL_) \
- REG_VAL__R_NETWORK_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7) \
- ), \
- R_NETWORK_TR_CTRL__WRITE(R_NETWORK_TR_CTRL__ADDR, *R_NETWORK_TR_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_NETWORK_TR_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_NETWORK_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_NETWORK_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_NETWORK_TR_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- *R_NETWORK_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_NETWORK_TR_CTRL_) \
- REG_VAL__R_NETWORK_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_NETWORK_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_NETWORK_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- (R_NETWORK_TR_CTRL__clr_error__##f1##__MASK & REG__##v1) | \
- (R_NETWORK_TR_CTRL__delay__##f2##__MASK & REG__##v2) | \
- (R_NETWORK_TR_CTRL__cancel__##f3##__MASK & REG__##v3) | \
- (R_NETWORK_TR_CTRL__cd__##f4##__MASK & REG__##v4) | \
- (R_NETWORK_TR_CTRL__retry__##f5##__MASK & REG__##v5) | \
- (R_NETWORK_TR_CTRL__pad__##f6##__MASK & REG__##v6) | \
- (R_NETWORK_TR_CTRL__crc__##f7##__MASK & REG__##v7) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_TR_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- (R_NETWORK_TR_CTRL__clr_error__##f1##__VAL(R_NETWORK_TR_CTRL_, clr_error_, v1) << R_NETWORK_TR_CTRL__clr_error__BITNR) | \
- (R_NETWORK_TR_CTRL__delay__##f2##__VAL(R_NETWORK_TR_CTRL_, delay_, v2) << R_NETWORK_TR_CTRL__delay__BITNR) | \
- (R_NETWORK_TR_CTRL__cancel__##f3##__VAL(R_NETWORK_TR_CTRL_, cancel_, v3) << R_NETWORK_TR_CTRL__cancel__BITNR) | \
- (R_NETWORK_TR_CTRL__cd__##f4##__VAL(R_NETWORK_TR_CTRL_, cd_, v4) << R_NETWORK_TR_CTRL__cd__BITNR) | \
- (R_NETWORK_TR_CTRL__retry__##f5##__VAL(R_NETWORK_TR_CTRL_, retry_, v5) << R_NETWORK_TR_CTRL__retry__BITNR) | \
- (R_NETWORK_TR_CTRL__pad__##f6##__VAL(R_NETWORK_TR_CTRL_, pad_, v6) << R_NETWORK_TR_CTRL__pad__BITNR) | \
- (R_NETWORK_TR_CTRL__crc__##f7##__VAL(R_NETWORK_TR_CTRL_, crc_, v7) << R_NETWORK_TR_CTRL__crc__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_NETWORK_TR_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_NETWORK_TR_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_NETWORK_TR_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7) ( \
- (R_NETWORK_TR_CTRL__clr_error__##f1_##_VAL(R_NETWORK_TR_CTRL_, clr_error_, v1) << R_NETWORK_TR_CTRL__clr_error__BITNR) | \
- (R_NETWORK_TR_CTRL__delay__##f2_##_VAL(R_NETWORK_TR_CTRL_, delay_, v2) << R_NETWORK_TR_CTRL__delay__BITNR) | \
- (R_NETWORK_TR_CTRL__cancel__##f3_##_VAL(R_NETWORK_TR_CTRL_, cancel_, v3) << R_NETWORK_TR_CTRL__cancel__BITNR) | \
- (R_NETWORK_TR_CTRL__cd__##f4_##_VAL(R_NETWORK_TR_CTRL_, cd_, v4) << R_NETWORK_TR_CTRL__cd__BITNR) | \
- (R_NETWORK_TR_CTRL__retry__##f5_##_VAL(R_NETWORK_TR_CTRL_, retry_, v5) << R_NETWORK_TR_CTRL__retry__BITNR) | \
- (R_NETWORK_TR_CTRL__pad__##f6_##_VAL(R_NETWORK_TR_CTRL_, pad_, v6) << R_NETWORK_TR_CTRL__pad__BITNR) | \
- (R_NETWORK_TR_CTRL__crc__##f7_##_VAL(R_NETWORK_TR_CTRL_, crc_, v7) << R_NETWORK_TR_CTRL__crc__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR0_CONFIG
- * - type: WO
- * - addr: 0xb0000044
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR0_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR0_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR0_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR0_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20) ( \
- *R_PAR0_CONFIG__SADDR = ( \
- REG_INITIATED(R_PAR0_CONFIG_) \
- REG_VAL__R_PAR0_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20) \
- ), \
- R_PAR0_CONFIG__WRITE(R_PAR0_CONFIG__ADDR, *R_PAR0_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR0_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR0_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PAR0_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR0_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20) ( \
- *R_PAR0_CONFIG__SADDR = ( \
- REG_INITIATED(R_PAR0_CONFIG_) \
- REG_VAL__R_PAR0_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR0_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR0_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20) ( \
- (R_PAR0_CONFIG__ioe__##f1##__MASK & REG__##v1) | \
- (R_PAR0_CONFIG__iseli__##f2##__MASK & REG__##v2) | \
- (R_PAR0_CONFIG__iautofd__##f3##__MASK & REG__##v3) | \
- (R_PAR0_CONFIG__istrb__##f4##__MASK & REG__##v4) | \
- (R_PAR0_CONFIG__iinit__##f5##__MASK & REG__##v5) | \
- (R_PAR0_CONFIG__iperr__##f6##__MASK & REG__##v6) | \
- (R_PAR0_CONFIG__iack__##f7##__MASK & REG__##v7) | \
- (R_PAR0_CONFIG__ibusy__##f8##__MASK & REG__##v8) | \
- (R_PAR0_CONFIG__ifault__##f9##__MASK & REG__##v9) | \
- (R_PAR0_CONFIG__isel__##f10##__MASK & REG__##v10) | \
- (R_PAR0_CONFIG__ext_mode__##f11##__MASK & REG__##v11) | \
- (R_PAR0_CONFIG__wide__##f12##__MASK & REG__##v12) | \
- (R_PAR0_CONFIG__dma__##f13##__MASK & REG__##v13) | \
- (R_PAR0_CONFIG__rle_in__##f14##__MASK & REG__##v14) | \
- (R_PAR0_CONFIG__rle_out__##f15##__MASK & REG__##v15) | \
- (R_PAR0_CONFIG__enable__##f16##__MASK & REG__##v16) | \
- (R_PAR0_CONFIG__force__##f17##__MASK & REG__##v17) | \
- (R_PAR0_CONFIG__ign_ack__##f18##__MASK & REG__##v18) | \
- (R_PAR0_CONFIG__oe_ack__##f19##__MASK & REG__##v19) | \
- (R_PAR0_CONFIG__mode__##f20##__MASK & REG__##v20) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20) ( \
- (R_PAR0_CONFIG__ioe__##f1##__VAL(R_PAR0_CONFIG_, ioe_, v1) << R_PAR0_CONFIG__ioe__BITNR) | \
- (R_PAR0_CONFIG__iseli__##f2##__VAL(R_PAR0_CONFIG_, iseli_, v2) << R_PAR0_CONFIG__iseli__BITNR) | \
- (R_PAR0_CONFIG__iautofd__##f3##__VAL(R_PAR0_CONFIG_, iautofd_, v3) << R_PAR0_CONFIG__iautofd__BITNR) | \
- (R_PAR0_CONFIG__istrb__##f4##__VAL(R_PAR0_CONFIG_, istrb_, v4) << R_PAR0_CONFIG__istrb__BITNR) | \
- (R_PAR0_CONFIG__iinit__##f5##__VAL(R_PAR0_CONFIG_, iinit_, v5) << R_PAR0_CONFIG__iinit__BITNR) | \
- (R_PAR0_CONFIG__iperr__##f6##__VAL(R_PAR0_CONFIG_, iperr_, v6) << R_PAR0_CONFIG__iperr__BITNR) | \
- (R_PAR0_CONFIG__iack__##f7##__VAL(R_PAR0_CONFIG_, iack_, v7) << R_PAR0_CONFIG__iack__BITNR) | \
- (R_PAR0_CONFIG__ibusy__##f8##__VAL(R_PAR0_CONFIG_, ibusy_, v8) << R_PAR0_CONFIG__ibusy__BITNR) | \
- (R_PAR0_CONFIG__ifault__##f9##__VAL(R_PAR0_CONFIG_, ifault_, v9) << R_PAR0_CONFIG__ifault__BITNR) | \
- (R_PAR0_CONFIG__isel__##f10##__VAL(R_PAR0_CONFIG_, isel_, v10) << R_PAR0_CONFIG__isel__BITNR) | \
- (R_PAR0_CONFIG__ext_mode__##f11##__VAL(R_PAR0_CONFIG_, ext_mode_, v11) << R_PAR0_CONFIG__ext_mode__BITNR) | \
- (R_PAR0_CONFIG__wide__##f12##__VAL(R_PAR0_CONFIG_, wide_, v12) << R_PAR0_CONFIG__wide__BITNR) | \
- (R_PAR0_CONFIG__dma__##f13##__VAL(R_PAR0_CONFIG_, dma_, v13) << R_PAR0_CONFIG__dma__BITNR) | \
- (R_PAR0_CONFIG__rle_in__##f14##__VAL(R_PAR0_CONFIG_, rle_in_, v14) << R_PAR0_CONFIG__rle_in__BITNR) | \
- (R_PAR0_CONFIG__rle_out__##f15##__VAL(R_PAR0_CONFIG_, rle_out_, v15) << R_PAR0_CONFIG__rle_out__BITNR) | \
- (R_PAR0_CONFIG__enable__##f16##__VAL(R_PAR0_CONFIG_, enable_, v16) << R_PAR0_CONFIG__enable__BITNR) | \
- (R_PAR0_CONFIG__force__##f17##__VAL(R_PAR0_CONFIG_, force_, v17) << R_PAR0_CONFIG__force__BITNR) | \
- (R_PAR0_CONFIG__ign_ack__##f18##__VAL(R_PAR0_CONFIG_, ign_ack_, v18) << R_PAR0_CONFIG__ign_ack__BITNR) | \
- (R_PAR0_CONFIG__oe_ack__##f19##__VAL(R_PAR0_CONFIG_, oe_ack_, v19) << R_PAR0_CONFIG__oe_ack__BITNR) | \
- (R_PAR0_CONFIG__mode__##f20##__VAL(R_PAR0_CONFIG_, mode_, v20) << R_PAR0_CONFIG__mode__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20) ( \
- (R_PAR0_CONFIG__ioe__##f1_##_VAL(R_PAR0_CONFIG_, ioe_, v1) << R_PAR0_CONFIG__ioe__BITNR) | \
- (R_PAR0_CONFIG__iseli__##f2_##_VAL(R_PAR0_CONFIG_, iseli_, v2) << R_PAR0_CONFIG__iseli__BITNR) | \
- (R_PAR0_CONFIG__iautofd__##f3_##_VAL(R_PAR0_CONFIG_, iautofd_, v3) << R_PAR0_CONFIG__iautofd__BITNR) | \
- (R_PAR0_CONFIG__istrb__##f4_##_VAL(R_PAR0_CONFIG_, istrb_, v4) << R_PAR0_CONFIG__istrb__BITNR) | \
- (R_PAR0_CONFIG__iinit__##f5_##_VAL(R_PAR0_CONFIG_, iinit_, v5) << R_PAR0_CONFIG__iinit__BITNR) | \
- (R_PAR0_CONFIG__iperr__##f6_##_VAL(R_PAR0_CONFIG_, iperr_, v6) << R_PAR0_CONFIG__iperr__BITNR) | \
- (R_PAR0_CONFIG__iack__##f7_##_VAL(R_PAR0_CONFIG_, iack_, v7) << R_PAR0_CONFIG__iack__BITNR) | \
- (R_PAR0_CONFIG__ibusy__##f8_##_VAL(R_PAR0_CONFIG_, ibusy_, v8) << R_PAR0_CONFIG__ibusy__BITNR) | \
- (R_PAR0_CONFIG__ifault__##f9_##_VAL(R_PAR0_CONFIG_, ifault_, v9) << R_PAR0_CONFIG__ifault__BITNR) | \
- (R_PAR0_CONFIG__isel__##f10_##_VAL(R_PAR0_CONFIG_, isel_, v10) << R_PAR0_CONFIG__isel__BITNR) | \
- (R_PAR0_CONFIG__ext_mode__##f11_##_VAL(R_PAR0_CONFIG_, ext_mode_, v11) << R_PAR0_CONFIG__ext_mode__BITNR) | \
- (R_PAR0_CONFIG__wide__##f12_##_VAL(R_PAR0_CONFIG_, wide_, v12) << R_PAR0_CONFIG__wide__BITNR) | \
- (R_PAR0_CONFIG__dma__##f13_##_VAL(R_PAR0_CONFIG_, dma_, v13) << R_PAR0_CONFIG__dma__BITNR) | \
- (R_PAR0_CONFIG__rle_in__##f14_##_VAL(R_PAR0_CONFIG_, rle_in_, v14) << R_PAR0_CONFIG__rle_in__BITNR) | \
- (R_PAR0_CONFIG__rle_out__##f15_##_VAL(R_PAR0_CONFIG_, rle_out_, v15) << R_PAR0_CONFIG__rle_out__BITNR) | \
- (R_PAR0_CONFIG__enable__##f16_##_VAL(R_PAR0_CONFIG_, enable_, v16) << R_PAR0_CONFIG__enable__BITNR) | \
- (R_PAR0_CONFIG__force__##f17_##_VAL(R_PAR0_CONFIG_, force_, v17) << R_PAR0_CONFIG__force__BITNR) | \
- (R_PAR0_CONFIG__ign_ack__##f18_##_VAL(R_PAR0_CONFIG_, ign_ack_, v18) << R_PAR0_CONFIG__ign_ack__BITNR) | \
- (R_PAR0_CONFIG__oe_ack__##f19_##_VAL(R_PAR0_CONFIG_, oe_ack_, v19) << R_PAR0_CONFIG__oe_ack__BITNR) | \
- (R_PAR0_CONFIG__mode__##f20_##_VAL(R_PAR0_CONFIG_, mode_, v20) << R_PAR0_CONFIG__mode__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR0_CTRL
- * - type: WO
- * - addr: 0xb0000042
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR0_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR0_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR0_CTRL(f1,v1) ( \
- *R_PAR0_CTRL__SADDR = ( \
- REG_INITIATED(R_PAR0_CTRL_) \
- REG_VAL__R_PAR0_CTRL_(f1##_,v1) \
- ), \
- R_PAR0_CTRL__WRITE(R_PAR0_CTRL__ADDR, *R_PAR0_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR0_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR0_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PAR0_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR0_CTRL__SHADOW(f1,v1) ( \
- *R_PAR0_CTRL__SADDR = ( \
- REG_INITIATED(R_PAR0_CTRL_) \
- REG_VAL__R_PAR0_CTRL_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR0_CTRL(f1,v1) ( \
- (R_PAR0_CTRL__ctrl__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_CTRL(f1,v1) ( \
- (R_PAR0_CTRL__ctrl__##f1##__VAL(R_PAR0_CTRL_, ctrl_, v1) << R_PAR0_CTRL__ctrl__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_CTRL_(f1_,v1) ( \
- (R_PAR0_CTRL__ctrl__##f1_##_VAL(R_PAR0_CTRL_, ctrl_, v1) << R_PAR0_CTRL__ctrl__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR0_CTRL_DATA
- * - type: WO
- * - addr: 0xb0000040
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR0_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR0_CTRL_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR0_CTRL_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR0_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PAR0_CTRL_DATA__SADDR = ( \
- REG_INITIATED(R_PAR0_CTRL_DATA_) \
- REG_VAL__R_PAR0_CTRL_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_PAR0_CTRL_DATA__WRITE(R_PAR0_CTRL_DATA__ADDR, *R_PAR0_CTRL_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR0_CTRL_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR0_CTRL_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PAR0_CTRL_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR0_CTRL_DATA__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PAR0_CTRL_DATA__SADDR = ( \
- REG_INITIATED(R_PAR0_CTRL_DATA_) \
- REG_VAL__R_PAR0_CTRL_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR0_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR0_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PAR0_CTRL_DATA__peri_int__##f1##__MASK & REG__##v1) | \
- (R_PAR0_CTRL_DATA__oe__##f2##__MASK & REG__##v2) | \
- (R_PAR0_CTRL_DATA__seli__##f3##__MASK & REG__##v3) | \
- (R_PAR0_CTRL_DATA__autofd__##f4##__MASK & REG__##v4) | \
- (R_PAR0_CTRL_DATA__strb__##f5##__MASK & REG__##v5) | \
- (R_PAR0_CTRL_DATA__init__##f6##__MASK & REG__##v6) | \
- (R_PAR0_CTRL_DATA__ecp_cmd__##f7##__MASK & REG__##v7) | \
- (R_PAR0_CTRL_DATA__data__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_CTRL_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PAR0_CTRL_DATA__peri_int__##f1##__VAL(R_PAR0_CTRL_DATA_, peri_int_, v1) << R_PAR0_CTRL_DATA__peri_int__BITNR) | \
- (R_PAR0_CTRL_DATA__oe__##f2##__VAL(R_PAR0_CTRL_DATA_, oe_, v2) << R_PAR0_CTRL_DATA__oe__BITNR) | \
- (R_PAR0_CTRL_DATA__seli__##f3##__VAL(R_PAR0_CTRL_DATA_, seli_, v3) << R_PAR0_CTRL_DATA__seli__BITNR) | \
- (R_PAR0_CTRL_DATA__autofd__##f4##__VAL(R_PAR0_CTRL_DATA_, autofd_, v4) << R_PAR0_CTRL_DATA__autofd__BITNR) | \
- (R_PAR0_CTRL_DATA__strb__##f5##__VAL(R_PAR0_CTRL_DATA_, strb_, v5) << R_PAR0_CTRL_DATA__strb__BITNR) | \
- (R_PAR0_CTRL_DATA__init__##f6##__VAL(R_PAR0_CTRL_DATA_, init_, v6) << R_PAR0_CTRL_DATA__init__BITNR) | \
- (R_PAR0_CTRL_DATA__ecp_cmd__##f7##__VAL(R_PAR0_CTRL_DATA_, ecp_cmd_, v7) << R_PAR0_CTRL_DATA__ecp_cmd__BITNR) | \
- (R_PAR0_CTRL_DATA__data__##f8##__VAL(R_PAR0_CTRL_DATA_, data_, v8) << R_PAR0_CTRL_DATA__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_CTRL_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_CTRL_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_CTRL_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_PAR0_CTRL_DATA__peri_int__##f1_##_VAL(R_PAR0_CTRL_DATA_, peri_int_, v1) << R_PAR0_CTRL_DATA__peri_int__BITNR) | \
- (R_PAR0_CTRL_DATA__oe__##f2_##_VAL(R_PAR0_CTRL_DATA_, oe_, v2) << R_PAR0_CTRL_DATA__oe__BITNR) | \
- (R_PAR0_CTRL_DATA__seli__##f3_##_VAL(R_PAR0_CTRL_DATA_, seli_, v3) << R_PAR0_CTRL_DATA__seli__BITNR) | \
- (R_PAR0_CTRL_DATA__autofd__##f4_##_VAL(R_PAR0_CTRL_DATA_, autofd_, v4) << R_PAR0_CTRL_DATA__autofd__BITNR) | \
- (R_PAR0_CTRL_DATA__strb__##f5_##_VAL(R_PAR0_CTRL_DATA_, strb_, v5) << R_PAR0_CTRL_DATA__strb__BITNR) | \
- (R_PAR0_CTRL_DATA__init__##f6_##_VAL(R_PAR0_CTRL_DATA_, init_, v6) << R_PAR0_CTRL_DATA__init__BITNR) | \
- (R_PAR0_CTRL_DATA__ecp_cmd__##f7_##_VAL(R_PAR0_CTRL_DATA_, ecp_cmd_, v7) << R_PAR0_CTRL_DATA__ecp_cmd__BITNR) | \
- (R_PAR0_CTRL_DATA__data__##f8_##_VAL(R_PAR0_CTRL_DATA_, data_, v8) << R_PAR0_CTRL_DATA__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR0_DELAY
- * - type: WO
- * - addr: 0xb0000048
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR0_DELAY
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR0_DELAY.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR0_DELAY.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR0_DELAY(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_PAR0_DELAY__SADDR = ( \
- REG_INITIATED(R_PAR0_DELAY_) \
- REG_VAL__R_PAR0_DELAY_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ), \
- R_PAR0_DELAY__WRITE(R_PAR0_DELAY__ADDR, *R_PAR0_DELAY__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR0_DELAY__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR0_DELAY.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PAR0_DELAY.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR0_DELAY__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_PAR0_DELAY__SADDR = ( \
- REG_INITIATED(R_PAR0_DELAY_) \
- REG_VAL__R_PAR0_DELAY_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR0_DELAY
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR0_DELAY(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_PAR0_DELAY__fine_hold__##f1##__MASK & REG__##v1) | \
- (R_PAR0_DELAY__hold__##f2##__MASK & REG__##v2) | \
- (R_PAR0_DELAY__fine_strb__##f3##__MASK & REG__##v3) | \
- (R_PAR0_DELAY__strobe__##f4##__MASK & REG__##v4) | \
- (R_PAR0_DELAY__fine_setup__##f5##__MASK & REG__##v5) | \
- (R_PAR0_DELAY__setup__##f6##__MASK & REG__##v6) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_DELAY
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_DELAY.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_DELAY(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_PAR0_DELAY__fine_hold__##f1##__VAL(R_PAR0_DELAY_, fine_hold_, v1) << R_PAR0_DELAY__fine_hold__BITNR) | \
- (R_PAR0_DELAY__hold__##f2##__VAL(R_PAR0_DELAY_, hold_, v2) << R_PAR0_DELAY__hold__BITNR) | \
- (R_PAR0_DELAY__fine_strb__##f3##__VAL(R_PAR0_DELAY_, fine_strb_, v3) << R_PAR0_DELAY__fine_strb__BITNR) | \
- (R_PAR0_DELAY__strobe__##f4##__VAL(R_PAR0_DELAY_, strobe_, v4) << R_PAR0_DELAY__strobe__BITNR) | \
- (R_PAR0_DELAY__fine_setup__##f5##__VAL(R_PAR0_DELAY_, fine_setup_, v5) << R_PAR0_DELAY__fine_setup__BITNR) | \
- (R_PAR0_DELAY__setup__##f6##__VAL(R_PAR0_DELAY_, setup_, v6) << R_PAR0_DELAY__setup__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_DELAY_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_DELAY.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_DELAY_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6) ( \
- (R_PAR0_DELAY__fine_hold__##f1_##_VAL(R_PAR0_DELAY_, fine_hold_, v1) << R_PAR0_DELAY__fine_hold__BITNR) | \
- (R_PAR0_DELAY__hold__##f2_##_VAL(R_PAR0_DELAY_, hold_, v2) << R_PAR0_DELAY__hold__BITNR) | \
- (R_PAR0_DELAY__fine_strb__##f3_##_VAL(R_PAR0_DELAY_, fine_strb_, v3) << R_PAR0_DELAY__fine_strb__BITNR) | \
- (R_PAR0_DELAY__strobe__##f4_##_VAL(R_PAR0_DELAY_, strobe_, v4) << R_PAR0_DELAY__strobe__BITNR) | \
- (R_PAR0_DELAY__fine_setup__##f5_##_VAL(R_PAR0_DELAY_, fine_setup_, v5) << R_PAR0_DELAY__fine_setup__BITNR) | \
- (R_PAR0_DELAY__setup__##f6_##_VAL(R_PAR0_DELAY_, setup_, v6) << R_PAR0_DELAY__setup__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR0_STATUS
- * - type: RO
- * - addr: 0xb0000042
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR0_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR0_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_PAR0_STATUS__mode__##f1##__MASK & REG__##v1) | \
- (R_PAR0_STATUS__perr__##f2##__MASK & REG__##v2) | \
- (R_PAR0_STATUS__ack__##f3##__MASK & REG__##v3) | \
- (R_PAR0_STATUS__busy__##f4##__MASK & REG__##v4) | \
- (R_PAR0_STATUS__fault__##f5##__MASK & REG__##v5) | \
- (R_PAR0_STATUS__sel__##f6##__MASK & REG__##v6) | \
- (R_PAR0_STATUS__ext_mode__##f7##__MASK & REG__##v7) | \
- (R_PAR0_STATUS__ecp_16__##f8##__MASK & REG__##v8) | \
- (R_PAR0_STATUS__tr_rdy__##f9##__MASK & REG__##v9) | \
- (R_PAR0_STATUS__dav__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_PAR0_STATUS__mode__##f1##__VAL(R_PAR0_STATUS_, mode_, v1) << R_PAR0_STATUS__mode__BITNR) | \
- (R_PAR0_STATUS__perr__##f2##__VAL(R_PAR0_STATUS_, perr_, v2) << R_PAR0_STATUS__perr__BITNR) | \
- (R_PAR0_STATUS__ack__##f3##__VAL(R_PAR0_STATUS_, ack_, v3) << R_PAR0_STATUS__ack__BITNR) | \
- (R_PAR0_STATUS__busy__##f4##__VAL(R_PAR0_STATUS_, busy_, v4) << R_PAR0_STATUS__busy__BITNR) | \
- (R_PAR0_STATUS__fault__##f5##__VAL(R_PAR0_STATUS_, fault_, v5) << R_PAR0_STATUS__fault__BITNR) | \
- (R_PAR0_STATUS__sel__##f6##__VAL(R_PAR0_STATUS_, sel_, v6) << R_PAR0_STATUS__sel__BITNR) | \
- (R_PAR0_STATUS__ext_mode__##f7##__VAL(R_PAR0_STATUS_, ext_mode_, v7) << R_PAR0_STATUS__ext_mode__BITNR) | \
- (R_PAR0_STATUS__ecp_16__##f8##__VAL(R_PAR0_STATUS_, ecp_16_, v8) << R_PAR0_STATUS__ecp_16__BITNR) | \
- (R_PAR0_STATUS__tr_rdy__##f9##__VAL(R_PAR0_STATUS_, tr_rdy_, v9) << R_PAR0_STATUS__tr_rdy__BITNR) | \
- (R_PAR0_STATUS__dav__##f10##__VAL(R_PAR0_STATUS_, dav_, v10) << R_PAR0_STATUS__dav__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_PAR0_STATUS__mode__##f1_##_VAL(R_PAR0_STATUS_, mode_, v1) << R_PAR0_STATUS__mode__BITNR) | \
- (R_PAR0_STATUS__perr__##f2_##_VAL(R_PAR0_STATUS_, perr_, v2) << R_PAR0_STATUS__perr__BITNR) | \
- (R_PAR0_STATUS__ack__##f3_##_VAL(R_PAR0_STATUS_, ack_, v3) << R_PAR0_STATUS__ack__BITNR) | \
- (R_PAR0_STATUS__busy__##f4_##_VAL(R_PAR0_STATUS_, busy_, v4) << R_PAR0_STATUS__busy__BITNR) | \
- (R_PAR0_STATUS__fault__##f5_##_VAL(R_PAR0_STATUS_, fault_, v5) << R_PAR0_STATUS__fault__BITNR) | \
- (R_PAR0_STATUS__sel__##f6_##_VAL(R_PAR0_STATUS_, sel_, v6) << R_PAR0_STATUS__sel__BITNR) | \
- (R_PAR0_STATUS__ext_mode__##f7_##_VAL(R_PAR0_STATUS_, ext_mode_, v7) << R_PAR0_STATUS__ext_mode__BITNR) | \
- (R_PAR0_STATUS__ecp_16__##f8_##_VAL(R_PAR0_STATUS_, ecp_16_, v8) << R_PAR0_STATUS__ecp_16__BITNR) | \
- (R_PAR0_STATUS__tr_rdy__##f9_##_VAL(R_PAR0_STATUS_, tr_rdy_, v9) << R_PAR0_STATUS__tr_rdy__BITNR) | \
- (R_PAR0_STATUS__dav__##f10_##_VAL(R_PAR0_STATUS_, dav_, v10) << R_PAR0_STATUS__dav__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR0_STATUS_DATA
- * - type: RO
- * - addr: 0xb0000040
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR0_STATUS_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR0_STATUS_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_PAR0_STATUS_DATA__mode__##f1##__MASK & REG__##v1) | \
- (R_PAR0_STATUS_DATA__perr__##f2##__MASK & REG__##v2) | \
- (R_PAR0_STATUS_DATA__ack__##f3##__MASK & REG__##v3) | \
- (R_PAR0_STATUS_DATA__busy__##f4##__MASK & REG__##v4) | \
- (R_PAR0_STATUS_DATA__fault__##f5##__MASK & REG__##v5) | \
- (R_PAR0_STATUS_DATA__sel__##f6##__MASK & REG__##v6) | \
- (R_PAR0_STATUS_DATA__ext_mode__##f7##__MASK & REG__##v7) | \
- (R_PAR0_STATUS_DATA__ecp_16__##f8##__MASK & REG__##v8) | \
- (R_PAR0_STATUS_DATA__tr_rdy__##f9##__MASK & REG__##v9) | \
- (R_PAR0_STATUS_DATA__dav__##f10##__MASK & REG__##v10) | \
- (R_PAR0_STATUS_DATA__ecp_cmd__##f11##__MASK & REG__##v11) | \
- (R_PAR0_STATUS_DATA__data__##f12##__MASK & REG__##v12) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_STATUS_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_STATUS_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_STATUS_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_PAR0_STATUS_DATA__mode__##f1##__VAL(R_PAR0_STATUS_DATA_, mode_, v1) << R_PAR0_STATUS_DATA__mode__BITNR) | \
- (R_PAR0_STATUS_DATA__perr__##f2##__VAL(R_PAR0_STATUS_DATA_, perr_, v2) << R_PAR0_STATUS_DATA__perr__BITNR) | \
- (R_PAR0_STATUS_DATA__ack__##f3##__VAL(R_PAR0_STATUS_DATA_, ack_, v3) << R_PAR0_STATUS_DATA__ack__BITNR) | \
- (R_PAR0_STATUS_DATA__busy__##f4##__VAL(R_PAR0_STATUS_DATA_, busy_, v4) << R_PAR0_STATUS_DATA__busy__BITNR) | \
- (R_PAR0_STATUS_DATA__fault__##f5##__VAL(R_PAR0_STATUS_DATA_, fault_, v5) << R_PAR0_STATUS_DATA__fault__BITNR) | \
- (R_PAR0_STATUS_DATA__sel__##f6##__VAL(R_PAR0_STATUS_DATA_, sel_, v6) << R_PAR0_STATUS_DATA__sel__BITNR) | \
- (R_PAR0_STATUS_DATA__ext_mode__##f7##__VAL(R_PAR0_STATUS_DATA_, ext_mode_, v7) << R_PAR0_STATUS_DATA__ext_mode__BITNR) | \
- (R_PAR0_STATUS_DATA__ecp_16__##f8##__VAL(R_PAR0_STATUS_DATA_, ecp_16_, v8) << R_PAR0_STATUS_DATA__ecp_16__BITNR) | \
- (R_PAR0_STATUS_DATA__tr_rdy__##f9##__VAL(R_PAR0_STATUS_DATA_, tr_rdy_, v9) << R_PAR0_STATUS_DATA__tr_rdy__BITNR) | \
- (R_PAR0_STATUS_DATA__dav__##f10##__VAL(R_PAR0_STATUS_DATA_, dav_, v10) << R_PAR0_STATUS_DATA__dav__BITNR) | \
- (R_PAR0_STATUS_DATA__ecp_cmd__##f11##__VAL(R_PAR0_STATUS_DATA_, ecp_cmd_, v11) << R_PAR0_STATUS_DATA__ecp_cmd__BITNR) | \
- (R_PAR0_STATUS_DATA__data__##f12##__VAL(R_PAR0_STATUS_DATA_, data_, v12) << R_PAR0_STATUS_DATA__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR0_STATUS_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR0_STATUS_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR0_STATUS_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12) ( \
- (R_PAR0_STATUS_DATA__mode__##f1_##_VAL(R_PAR0_STATUS_DATA_, mode_, v1) << R_PAR0_STATUS_DATA__mode__BITNR) | \
- (R_PAR0_STATUS_DATA__perr__##f2_##_VAL(R_PAR0_STATUS_DATA_, perr_, v2) << R_PAR0_STATUS_DATA__perr__BITNR) | \
- (R_PAR0_STATUS_DATA__ack__##f3_##_VAL(R_PAR0_STATUS_DATA_, ack_, v3) << R_PAR0_STATUS_DATA__ack__BITNR) | \
- (R_PAR0_STATUS_DATA__busy__##f4_##_VAL(R_PAR0_STATUS_DATA_, busy_, v4) << R_PAR0_STATUS_DATA__busy__BITNR) | \
- (R_PAR0_STATUS_DATA__fault__##f5_##_VAL(R_PAR0_STATUS_DATA_, fault_, v5) << R_PAR0_STATUS_DATA__fault__BITNR) | \
- (R_PAR0_STATUS_DATA__sel__##f6_##_VAL(R_PAR0_STATUS_DATA_, sel_, v6) << R_PAR0_STATUS_DATA__sel__BITNR) | \
- (R_PAR0_STATUS_DATA__ext_mode__##f7_##_VAL(R_PAR0_STATUS_DATA_, ext_mode_, v7) << R_PAR0_STATUS_DATA__ext_mode__BITNR) | \
- (R_PAR0_STATUS_DATA__ecp_16__##f8_##_VAL(R_PAR0_STATUS_DATA_, ecp_16_, v8) << R_PAR0_STATUS_DATA__ecp_16__BITNR) | \
- (R_PAR0_STATUS_DATA__tr_rdy__##f9_##_VAL(R_PAR0_STATUS_DATA_, tr_rdy_, v9) << R_PAR0_STATUS_DATA__tr_rdy__BITNR) | \
- (R_PAR0_STATUS_DATA__dav__##f10_##_VAL(R_PAR0_STATUS_DATA_, dav_, v10) << R_PAR0_STATUS_DATA__dav__BITNR) | \
- (R_PAR0_STATUS_DATA__ecp_cmd__##f11_##_VAL(R_PAR0_STATUS_DATA_, ecp_cmd_, v11) << R_PAR0_STATUS_DATA__ecp_cmd__BITNR) | \
- (R_PAR0_STATUS_DATA__data__##f12_##_VAL(R_PAR0_STATUS_DATA_, data_, v12) << R_PAR0_STATUS_DATA__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR1_CONFIG
- * - type: WO
- * - addr: 0xb0000054
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR1_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR1_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR1_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR1_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_PAR1_CONFIG__SADDR = ( \
- REG_INITIATED(R_PAR1_CONFIG_) \
- REG_VAL__R_PAR1_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ), \
- R_PAR1_CONFIG__WRITE(R_PAR1_CONFIG__ADDR, *R_PAR1_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR1_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR1_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PAR1_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR1_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_PAR1_CONFIG__SADDR = ( \
- REG_INITIATED(R_PAR1_CONFIG_) \
- REG_VAL__R_PAR1_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR1_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR1_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_PAR1_CONFIG__ioe__##f1##__MASK & REG__##v1) | \
- (R_PAR1_CONFIG__iseli__##f2##__MASK & REG__##v2) | \
- (R_PAR1_CONFIG__iautofd__##f3##__MASK & REG__##v3) | \
- (R_PAR1_CONFIG__istrb__##f4##__MASK & REG__##v4) | \
- (R_PAR1_CONFIG__iinit__##f5##__MASK & REG__##v5) | \
- (R_PAR1_CONFIG__iperr__##f6##__MASK & REG__##v6) | \
- (R_PAR1_CONFIG__iack__##f7##__MASK & REG__##v7) | \
- (R_PAR1_CONFIG__ibusy__##f8##__MASK & REG__##v8) | \
- (R_PAR1_CONFIG__ifault__##f9##__MASK & REG__##v9) | \
- (R_PAR1_CONFIG__isel__##f10##__MASK & REG__##v10) | \
- (R_PAR1_CONFIG__ext_mode__##f11##__MASK & REG__##v11) | \
- (R_PAR1_CONFIG__dma__##f12##__MASK & REG__##v12) | \
- (R_PAR1_CONFIG__rle_in__##f13##__MASK & REG__##v13) | \
- (R_PAR1_CONFIG__rle_out__##f14##__MASK & REG__##v14) | \
- (R_PAR1_CONFIG__enable__##f15##__MASK & REG__##v15) | \
- (R_PAR1_CONFIG__force__##f16##__MASK & REG__##v16) | \
- (R_PAR1_CONFIG__ign_ack__##f17##__MASK & REG__##v17) | \
- (R_PAR1_CONFIG__oe_ack__##f18##__MASK & REG__##v18) | \
- (R_PAR1_CONFIG__mode__##f19##__MASK & REG__##v19) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_PAR1_CONFIG__ioe__##f1##__VAL(R_PAR1_CONFIG_, ioe_, v1) << R_PAR1_CONFIG__ioe__BITNR) | \
- (R_PAR1_CONFIG__iseli__##f2##__VAL(R_PAR1_CONFIG_, iseli_, v2) << R_PAR1_CONFIG__iseli__BITNR) | \
- (R_PAR1_CONFIG__iautofd__##f3##__VAL(R_PAR1_CONFIG_, iautofd_, v3) << R_PAR1_CONFIG__iautofd__BITNR) | \
- (R_PAR1_CONFIG__istrb__##f4##__VAL(R_PAR1_CONFIG_, istrb_, v4) << R_PAR1_CONFIG__istrb__BITNR) | \
- (R_PAR1_CONFIG__iinit__##f5##__VAL(R_PAR1_CONFIG_, iinit_, v5) << R_PAR1_CONFIG__iinit__BITNR) | \
- (R_PAR1_CONFIG__iperr__##f6##__VAL(R_PAR1_CONFIG_, iperr_, v6) << R_PAR1_CONFIG__iperr__BITNR) | \
- (R_PAR1_CONFIG__iack__##f7##__VAL(R_PAR1_CONFIG_, iack_, v7) << R_PAR1_CONFIG__iack__BITNR) | \
- (R_PAR1_CONFIG__ibusy__##f8##__VAL(R_PAR1_CONFIG_, ibusy_, v8) << R_PAR1_CONFIG__ibusy__BITNR) | \
- (R_PAR1_CONFIG__ifault__##f9##__VAL(R_PAR1_CONFIG_, ifault_, v9) << R_PAR1_CONFIG__ifault__BITNR) | \
- (R_PAR1_CONFIG__isel__##f10##__VAL(R_PAR1_CONFIG_, isel_, v10) << R_PAR1_CONFIG__isel__BITNR) | \
- (R_PAR1_CONFIG__ext_mode__##f11##__VAL(R_PAR1_CONFIG_, ext_mode_, v11) << R_PAR1_CONFIG__ext_mode__BITNR) | \
- (R_PAR1_CONFIG__dma__##f12##__VAL(R_PAR1_CONFIG_, dma_, v12) << R_PAR1_CONFIG__dma__BITNR) | \
- (R_PAR1_CONFIG__rle_in__##f13##__VAL(R_PAR1_CONFIG_, rle_in_, v13) << R_PAR1_CONFIG__rle_in__BITNR) | \
- (R_PAR1_CONFIG__rle_out__##f14##__VAL(R_PAR1_CONFIG_, rle_out_, v14) << R_PAR1_CONFIG__rle_out__BITNR) | \
- (R_PAR1_CONFIG__enable__##f15##__VAL(R_PAR1_CONFIG_, enable_, v15) << R_PAR1_CONFIG__enable__BITNR) | \
- (R_PAR1_CONFIG__force__##f16##__VAL(R_PAR1_CONFIG_, force_, v16) << R_PAR1_CONFIG__force__BITNR) | \
- (R_PAR1_CONFIG__ign_ack__##f17##__VAL(R_PAR1_CONFIG_, ign_ack_, v17) << R_PAR1_CONFIG__ign_ack__BITNR) | \
- (R_PAR1_CONFIG__oe_ack__##f18##__VAL(R_PAR1_CONFIG_, oe_ack_, v18) << R_PAR1_CONFIG__oe_ack__BITNR) | \
- (R_PAR1_CONFIG__mode__##f19##__VAL(R_PAR1_CONFIG_, mode_, v19) << R_PAR1_CONFIG__mode__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19) ( \
- (R_PAR1_CONFIG__ioe__##f1_##_VAL(R_PAR1_CONFIG_, ioe_, v1) << R_PAR1_CONFIG__ioe__BITNR) | \
- (R_PAR1_CONFIG__iseli__##f2_##_VAL(R_PAR1_CONFIG_, iseli_, v2) << R_PAR1_CONFIG__iseli__BITNR) | \
- (R_PAR1_CONFIG__iautofd__##f3_##_VAL(R_PAR1_CONFIG_, iautofd_, v3) << R_PAR1_CONFIG__iautofd__BITNR) | \
- (R_PAR1_CONFIG__istrb__##f4_##_VAL(R_PAR1_CONFIG_, istrb_, v4) << R_PAR1_CONFIG__istrb__BITNR) | \
- (R_PAR1_CONFIG__iinit__##f5_##_VAL(R_PAR1_CONFIG_, iinit_, v5) << R_PAR1_CONFIG__iinit__BITNR) | \
- (R_PAR1_CONFIG__iperr__##f6_##_VAL(R_PAR1_CONFIG_, iperr_, v6) << R_PAR1_CONFIG__iperr__BITNR) | \
- (R_PAR1_CONFIG__iack__##f7_##_VAL(R_PAR1_CONFIG_, iack_, v7) << R_PAR1_CONFIG__iack__BITNR) | \
- (R_PAR1_CONFIG__ibusy__##f8_##_VAL(R_PAR1_CONFIG_, ibusy_, v8) << R_PAR1_CONFIG__ibusy__BITNR) | \
- (R_PAR1_CONFIG__ifault__##f9_##_VAL(R_PAR1_CONFIG_, ifault_, v9) << R_PAR1_CONFIG__ifault__BITNR) | \
- (R_PAR1_CONFIG__isel__##f10_##_VAL(R_PAR1_CONFIG_, isel_, v10) << R_PAR1_CONFIG__isel__BITNR) | \
- (R_PAR1_CONFIG__ext_mode__##f11_##_VAL(R_PAR1_CONFIG_, ext_mode_, v11) << R_PAR1_CONFIG__ext_mode__BITNR) | \
- (R_PAR1_CONFIG__dma__##f12_##_VAL(R_PAR1_CONFIG_, dma_, v12) << R_PAR1_CONFIG__dma__BITNR) | \
- (R_PAR1_CONFIG__rle_in__##f13_##_VAL(R_PAR1_CONFIG_, rle_in_, v13) << R_PAR1_CONFIG__rle_in__BITNR) | \
- (R_PAR1_CONFIG__rle_out__##f14_##_VAL(R_PAR1_CONFIG_, rle_out_, v14) << R_PAR1_CONFIG__rle_out__BITNR) | \
- (R_PAR1_CONFIG__enable__##f15_##_VAL(R_PAR1_CONFIG_, enable_, v15) << R_PAR1_CONFIG__enable__BITNR) | \
- (R_PAR1_CONFIG__force__##f16_##_VAL(R_PAR1_CONFIG_, force_, v16) << R_PAR1_CONFIG__force__BITNR) | \
- (R_PAR1_CONFIG__ign_ack__##f17_##_VAL(R_PAR1_CONFIG_, ign_ack_, v17) << R_PAR1_CONFIG__ign_ack__BITNR) | \
- (R_PAR1_CONFIG__oe_ack__##f18_##_VAL(R_PAR1_CONFIG_, oe_ack_, v18) << R_PAR1_CONFIG__oe_ack__BITNR) | \
- (R_PAR1_CONFIG__mode__##f19_##_VAL(R_PAR1_CONFIG_, mode_, v19) << R_PAR1_CONFIG__mode__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR1_CTRL
- * - type: WO
- * - addr: 0xb0000052
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR1_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR1_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR1_CTRL(f1,v1) ( \
- *R_PAR1_CTRL__SADDR = ( \
- REG_INITIATED(R_PAR1_CTRL_) \
- REG_VAL__R_PAR1_CTRL_(f1##_,v1) \
- ), \
- R_PAR1_CTRL__WRITE(R_PAR1_CTRL__ADDR, *R_PAR1_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR1_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR1_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PAR1_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR1_CTRL__SHADOW(f1,v1) ( \
- *R_PAR1_CTRL__SADDR = ( \
- REG_INITIATED(R_PAR1_CTRL_) \
- REG_VAL__R_PAR1_CTRL_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR1_CTRL(f1,v1) ( \
- (R_PAR1_CTRL__ctrl__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_CTRL(f1,v1) ( \
- (R_PAR1_CTRL__ctrl__##f1##__VAL(R_PAR1_CTRL_, ctrl_, v1) << R_PAR1_CTRL__ctrl__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_CTRL_(f1_,v1) ( \
- (R_PAR1_CTRL__ctrl__##f1_##_VAL(R_PAR1_CTRL_, ctrl_, v1) << R_PAR1_CTRL__ctrl__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR1_CTRL_DATA
- * - type: WO
- * - addr: 0xb0000050
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR1_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR1_CTRL_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR1_CTRL_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR1_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PAR1_CTRL_DATA__SADDR = ( \
- REG_INITIATED(R_PAR1_CTRL_DATA_) \
- REG_VAL__R_PAR1_CTRL_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_PAR1_CTRL_DATA__WRITE(R_PAR1_CTRL_DATA__ADDR, *R_PAR1_CTRL_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR1_CTRL_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR1_CTRL_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PAR1_CTRL_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR1_CTRL_DATA__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PAR1_CTRL_DATA__SADDR = ( \
- REG_INITIATED(R_PAR1_CTRL_DATA_) \
- REG_VAL__R_PAR1_CTRL_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR1_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR1_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PAR1_CTRL_DATA__peri_int__##f1##__MASK & REG__##v1) | \
- (R_PAR1_CTRL_DATA__oe__##f2##__MASK & REG__##v2) | \
- (R_PAR1_CTRL_DATA__seli__##f3##__MASK & REG__##v3) | \
- (R_PAR1_CTRL_DATA__autofd__##f4##__MASK & REG__##v4) | \
- (R_PAR1_CTRL_DATA__strb__##f5##__MASK & REG__##v5) | \
- (R_PAR1_CTRL_DATA__init__##f6##__MASK & REG__##v6) | \
- (R_PAR1_CTRL_DATA__ecp_cmd__##f7##__MASK & REG__##v7) | \
- (R_PAR1_CTRL_DATA__data__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_CTRL_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_CTRL_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_CTRL_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PAR1_CTRL_DATA__peri_int__##f1##__VAL(R_PAR1_CTRL_DATA_, peri_int_, v1) << R_PAR1_CTRL_DATA__peri_int__BITNR) | \
- (R_PAR1_CTRL_DATA__oe__##f2##__VAL(R_PAR1_CTRL_DATA_, oe_, v2) << R_PAR1_CTRL_DATA__oe__BITNR) | \
- (R_PAR1_CTRL_DATA__seli__##f3##__VAL(R_PAR1_CTRL_DATA_, seli_, v3) << R_PAR1_CTRL_DATA__seli__BITNR) | \
- (R_PAR1_CTRL_DATA__autofd__##f4##__VAL(R_PAR1_CTRL_DATA_, autofd_, v4) << R_PAR1_CTRL_DATA__autofd__BITNR) | \
- (R_PAR1_CTRL_DATA__strb__##f5##__VAL(R_PAR1_CTRL_DATA_, strb_, v5) << R_PAR1_CTRL_DATA__strb__BITNR) | \
- (R_PAR1_CTRL_DATA__init__##f6##__VAL(R_PAR1_CTRL_DATA_, init_, v6) << R_PAR1_CTRL_DATA__init__BITNR) | \
- (R_PAR1_CTRL_DATA__ecp_cmd__##f7##__VAL(R_PAR1_CTRL_DATA_, ecp_cmd_, v7) << R_PAR1_CTRL_DATA__ecp_cmd__BITNR) | \
- (R_PAR1_CTRL_DATA__data__##f8##__VAL(R_PAR1_CTRL_DATA_, data_, v8) << R_PAR1_CTRL_DATA__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_CTRL_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_CTRL_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_CTRL_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_PAR1_CTRL_DATA__peri_int__##f1_##_VAL(R_PAR1_CTRL_DATA_, peri_int_, v1) << R_PAR1_CTRL_DATA__peri_int__BITNR) | \
- (R_PAR1_CTRL_DATA__oe__##f2_##_VAL(R_PAR1_CTRL_DATA_, oe_, v2) << R_PAR1_CTRL_DATA__oe__BITNR) | \
- (R_PAR1_CTRL_DATA__seli__##f3_##_VAL(R_PAR1_CTRL_DATA_, seli_, v3) << R_PAR1_CTRL_DATA__seli__BITNR) | \
- (R_PAR1_CTRL_DATA__autofd__##f4_##_VAL(R_PAR1_CTRL_DATA_, autofd_, v4) << R_PAR1_CTRL_DATA__autofd__BITNR) | \
- (R_PAR1_CTRL_DATA__strb__##f5_##_VAL(R_PAR1_CTRL_DATA_, strb_, v5) << R_PAR1_CTRL_DATA__strb__BITNR) | \
- (R_PAR1_CTRL_DATA__init__##f6_##_VAL(R_PAR1_CTRL_DATA_, init_, v6) << R_PAR1_CTRL_DATA__init__BITNR) | \
- (R_PAR1_CTRL_DATA__ecp_cmd__##f7_##_VAL(R_PAR1_CTRL_DATA_, ecp_cmd_, v7) << R_PAR1_CTRL_DATA__ecp_cmd__BITNR) | \
- (R_PAR1_CTRL_DATA__data__##f8_##_VAL(R_PAR1_CTRL_DATA_, data_, v8) << R_PAR1_CTRL_DATA__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR1_DELAY
- * - type: WO
- * - addr: 0xb0000058
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR1_DELAY
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR1_DELAY.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR1_DELAY.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR1_DELAY(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_PAR1_DELAY__SADDR = ( \
- REG_INITIATED(R_PAR1_DELAY_) \
- REG_VAL__R_PAR1_DELAY_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ), \
- R_PAR1_DELAY__WRITE(R_PAR1_DELAY__ADDR, *R_PAR1_DELAY__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR1_DELAY__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR1_DELAY.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PAR1_DELAY.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR1_DELAY__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_PAR1_DELAY__SADDR = ( \
- REG_INITIATED(R_PAR1_DELAY_) \
- REG_VAL__R_PAR1_DELAY_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR1_DELAY
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR1_DELAY(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_PAR1_DELAY__fine_hold__##f1##__MASK & REG__##v1) | \
- (R_PAR1_DELAY__hold__##f2##__MASK & REG__##v2) | \
- (R_PAR1_DELAY__fine_strb__##f3##__MASK & REG__##v3) | \
- (R_PAR1_DELAY__strobe__##f4##__MASK & REG__##v4) | \
- (R_PAR1_DELAY__fine_setup__##f5##__MASK & REG__##v5) | \
- (R_PAR1_DELAY__setup__##f6##__MASK & REG__##v6) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_DELAY
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_DELAY.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_DELAY(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_PAR1_DELAY__fine_hold__##f1##__VAL(R_PAR1_DELAY_, fine_hold_, v1) << R_PAR1_DELAY__fine_hold__BITNR) | \
- (R_PAR1_DELAY__hold__##f2##__VAL(R_PAR1_DELAY_, hold_, v2) << R_PAR1_DELAY__hold__BITNR) | \
- (R_PAR1_DELAY__fine_strb__##f3##__VAL(R_PAR1_DELAY_, fine_strb_, v3) << R_PAR1_DELAY__fine_strb__BITNR) | \
- (R_PAR1_DELAY__strobe__##f4##__VAL(R_PAR1_DELAY_, strobe_, v4) << R_PAR1_DELAY__strobe__BITNR) | \
- (R_PAR1_DELAY__fine_setup__##f5##__VAL(R_PAR1_DELAY_, fine_setup_, v5) << R_PAR1_DELAY__fine_setup__BITNR) | \
- (R_PAR1_DELAY__setup__##f6##__VAL(R_PAR1_DELAY_, setup_, v6) << R_PAR1_DELAY__setup__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_DELAY_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_DELAY.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_DELAY_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6) ( \
- (R_PAR1_DELAY__fine_hold__##f1_##_VAL(R_PAR1_DELAY_, fine_hold_, v1) << R_PAR1_DELAY__fine_hold__BITNR) | \
- (R_PAR1_DELAY__hold__##f2_##_VAL(R_PAR1_DELAY_, hold_, v2) << R_PAR1_DELAY__hold__BITNR) | \
- (R_PAR1_DELAY__fine_strb__##f3_##_VAL(R_PAR1_DELAY_, fine_strb_, v3) << R_PAR1_DELAY__fine_strb__BITNR) | \
- (R_PAR1_DELAY__strobe__##f4_##_VAL(R_PAR1_DELAY_, strobe_, v4) << R_PAR1_DELAY__strobe__BITNR) | \
- (R_PAR1_DELAY__fine_setup__##f5_##_VAL(R_PAR1_DELAY_, fine_setup_, v5) << R_PAR1_DELAY__fine_setup__BITNR) | \
- (R_PAR1_DELAY__setup__##f6_##_VAL(R_PAR1_DELAY_, setup_, v6) << R_PAR1_DELAY__setup__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR1_STATUS
- * - type: RO
- * - addr: 0xb0000052
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR1_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_PAR1_STATUS__mode__##f1##__MASK & REG__##v1) | \
- (R_PAR1_STATUS__perr__##f2##__MASK & REG__##v2) | \
- (R_PAR1_STATUS__ack__##f3##__MASK & REG__##v3) | \
- (R_PAR1_STATUS__busy__##f4##__MASK & REG__##v4) | \
- (R_PAR1_STATUS__fault__##f5##__MASK & REG__##v5) | \
- (R_PAR1_STATUS__sel__##f6##__MASK & REG__##v6) | \
- (R_PAR1_STATUS__ext_mode__##f7##__MASK & REG__##v7) | \
- (R_PAR1_STATUS__tr_rdy__##f8##__MASK & REG__##v8) | \
- (R_PAR1_STATUS__dav__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_PAR1_STATUS__mode__##f1##__VAL(R_PAR1_STATUS_, mode_, v1) << R_PAR1_STATUS__mode__BITNR) | \
- (R_PAR1_STATUS__perr__##f2##__VAL(R_PAR1_STATUS_, perr_, v2) << R_PAR1_STATUS__perr__BITNR) | \
- (R_PAR1_STATUS__ack__##f3##__VAL(R_PAR1_STATUS_, ack_, v3) << R_PAR1_STATUS__ack__BITNR) | \
- (R_PAR1_STATUS__busy__##f4##__VAL(R_PAR1_STATUS_, busy_, v4) << R_PAR1_STATUS__busy__BITNR) | \
- (R_PAR1_STATUS__fault__##f5##__VAL(R_PAR1_STATUS_, fault_, v5) << R_PAR1_STATUS__fault__BITNR) | \
- (R_PAR1_STATUS__sel__##f6##__VAL(R_PAR1_STATUS_, sel_, v6) << R_PAR1_STATUS__sel__BITNR) | \
- (R_PAR1_STATUS__ext_mode__##f7##__VAL(R_PAR1_STATUS_, ext_mode_, v7) << R_PAR1_STATUS__ext_mode__BITNR) | \
- (R_PAR1_STATUS__tr_rdy__##f8##__VAL(R_PAR1_STATUS_, tr_rdy_, v8) << R_PAR1_STATUS__tr_rdy__BITNR) | \
- (R_PAR1_STATUS__dav__##f9##__VAL(R_PAR1_STATUS_, dav_, v9) << R_PAR1_STATUS__dav__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_PAR1_STATUS__mode__##f1_##_VAL(R_PAR1_STATUS_, mode_, v1) << R_PAR1_STATUS__mode__BITNR) | \
- (R_PAR1_STATUS__perr__##f2_##_VAL(R_PAR1_STATUS_, perr_, v2) << R_PAR1_STATUS__perr__BITNR) | \
- (R_PAR1_STATUS__ack__##f3_##_VAL(R_PAR1_STATUS_, ack_, v3) << R_PAR1_STATUS__ack__BITNR) | \
- (R_PAR1_STATUS__busy__##f4_##_VAL(R_PAR1_STATUS_, busy_, v4) << R_PAR1_STATUS__busy__BITNR) | \
- (R_PAR1_STATUS__fault__##f5_##_VAL(R_PAR1_STATUS_, fault_, v5) << R_PAR1_STATUS__fault__BITNR) | \
- (R_PAR1_STATUS__sel__##f6_##_VAL(R_PAR1_STATUS_, sel_, v6) << R_PAR1_STATUS__sel__BITNR) | \
- (R_PAR1_STATUS__ext_mode__##f7_##_VAL(R_PAR1_STATUS_, ext_mode_, v7) << R_PAR1_STATUS__ext_mode__BITNR) | \
- (R_PAR1_STATUS__tr_rdy__##f8_##_VAL(R_PAR1_STATUS_, tr_rdy_, v8) << R_PAR1_STATUS__tr_rdy__BITNR) | \
- (R_PAR1_STATUS__dav__##f9_##_VAL(R_PAR1_STATUS_, dav_, v9) << R_PAR1_STATUS__dav__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR1_STATUS_DATA
- * - type: RO
- * - addr: 0xb0000050
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR1_STATUS_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR1_STATUS_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- (R_PAR1_STATUS_DATA__mode__##f1##__MASK & REG__##v1) | \
- (R_PAR1_STATUS_DATA__perr__##f2##__MASK & REG__##v2) | \
- (R_PAR1_STATUS_DATA__ack__##f3##__MASK & REG__##v3) | \
- (R_PAR1_STATUS_DATA__busy__##f4##__MASK & REG__##v4) | \
- (R_PAR1_STATUS_DATA__fault__##f5##__MASK & REG__##v5) | \
- (R_PAR1_STATUS_DATA__sel__##f6##__MASK & REG__##v6) | \
- (R_PAR1_STATUS_DATA__ext_mode__##f7##__MASK & REG__##v7) | \
- (R_PAR1_STATUS_DATA__tr_rdy__##f8##__MASK & REG__##v8) | \
- (R_PAR1_STATUS_DATA__dav__##f9##__MASK & REG__##v9) | \
- (R_PAR1_STATUS_DATA__ecp_cmd__##f10##__MASK & REG__##v10) | \
- (R_PAR1_STATUS_DATA__data__##f11##__MASK & REG__##v11) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_STATUS_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_STATUS_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_STATUS_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- (R_PAR1_STATUS_DATA__mode__##f1##__VAL(R_PAR1_STATUS_DATA_, mode_, v1) << R_PAR1_STATUS_DATA__mode__BITNR) | \
- (R_PAR1_STATUS_DATA__perr__##f2##__VAL(R_PAR1_STATUS_DATA_, perr_, v2) << R_PAR1_STATUS_DATA__perr__BITNR) | \
- (R_PAR1_STATUS_DATA__ack__##f3##__VAL(R_PAR1_STATUS_DATA_, ack_, v3) << R_PAR1_STATUS_DATA__ack__BITNR) | \
- (R_PAR1_STATUS_DATA__busy__##f4##__VAL(R_PAR1_STATUS_DATA_, busy_, v4) << R_PAR1_STATUS_DATA__busy__BITNR) | \
- (R_PAR1_STATUS_DATA__fault__##f5##__VAL(R_PAR1_STATUS_DATA_, fault_, v5) << R_PAR1_STATUS_DATA__fault__BITNR) | \
- (R_PAR1_STATUS_DATA__sel__##f6##__VAL(R_PAR1_STATUS_DATA_, sel_, v6) << R_PAR1_STATUS_DATA__sel__BITNR) | \
- (R_PAR1_STATUS_DATA__ext_mode__##f7##__VAL(R_PAR1_STATUS_DATA_, ext_mode_, v7) << R_PAR1_STATUS_DATA__ext_mode__BITNR) | \
- (R_PAR1_STATUS_DATA__tr_rdy__##f8##__VAL(R_PAR1_STATUS_DATA_, tr_rdy_, v8) << R_PAR1_STATUS_DATA__tr_rdy__BITNR) | \
- (R_PAR1_STATUS_DATA__dav__##f9##__VAL(R_PAR1_STATUS_DATA_, dav_, v9) << R_PAR1_STATUS_DATA__dav__BITNR) | \
- (R_PAR1_STATUS_DATA__ecp_cmd__##f10##__VAL(R_PAR1_STATUS_DATA_, ecp_cmd_, v10) << R_PAR1_STATUS_DATA__ecp_cmd__BITNR) | \
- (R_PAR1_STATUS_DATA__data__##f11##__VAL(R_PAR1_STATUS_DATA_, data_, v11) << R_PAR1_STATUS_DATA__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR1_STATUS_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR1_STATUS_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR1_STATUS_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11) ( \
- (R_PAR1_STATUS_DATA__mode__##f1_##_VAL(R_PAR1_STATUS_DATA_, mode_, v1) << R_PAR1_STATUS_DATA__mode__BITNR) | \
- (R_PAR1_STATUS_DATA__perr__##f2_##_VAL(R_PAR1_STATUS_DATA_, perr_, v2) << R_PAR1_STATUS_DATA__perr__BITNR) | \
- (R_PAR1_STATUS_DATA__ack__##f3_##_VAL(R_PAR1_STATUS_DATA_, ack_, v3) << R_PAR1_STATUS_DATA__ack__BITNR) | \
- (R_PAR1_STATUS_DATA__busy__##f4_##_VAL(R_PAR1_STATUS_DATA_, busy_, v4) << R_PAR1_STATUS_DATA__busy__BITNR) | \
- (R_PAR1_STATUS_DATA__fault__##f5_##_VAL(R_PAR1_STATUS_DATA_, fault_, v5) << R_PAR1_STATUS_DATA__fault__BITNR) | \
- (R_PAR1_STATUS_DATA__sel__##f6_##_VAL(R_PAR1_STATUS_DATA_, sel_, v6) << R_PAR1_STATUS_DATA__sel__BITNR) | \
- (R_PAR1_STATUS_DATA__ext_mode__##f7_##_VAL(R_PAR1_STATUS_DATA_, ext_mode_, v7) << R_PAR1_STATUS_DATA__ext_mode__BITNR) | \
- (R_PAR1_STATUS_DATA__tr_rdy__##f8_##_VAL(R_PAR1_STATUS_DATA_, tr_rdy_, v8) << R_PAR1_STATUS_DATA__tr_rdy__BITNR) | \
- (R_PAR1_STATUS_DATA__dav__##f9_##_VAL(R_PAR1_STATUS_DATA_, dav_, v9) << R_PAR1_STATUS_DATA__dav__BITNR) | \
- (R_PAR1_STATUS_DATA__ecp_cmd__##f10_##_VAL(R_PAR1_STATUS_DATA_, ecp_cmd_, v10) << R_PAR1_STATUS_DATA__ecp_cmd__BITNR) | \
- (R_PAR1_STATUS_DATA__data__##f11_##_VAL(R_PAR1_STATUS_DATA_, data_, v11) << R_PAR1_STATUS_DATA__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_PAR_ECP16_DATA
- * - type: RW
- * - addr: 0xb0000040
- * - group: Parallel printer port registers
- */
-
-#if USE_GROUP__Parallel_printer_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PAR_ECP16_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PAR_ECP16_DATA.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PAR_ECP16_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PAR_ECP16_DATA(f1,v1) ( \
- R_PAR_ECP16_DATA__WRITE(R_PAR_ECP16_DATA__ADDR, ( \
- REG_VAL__R_PAR_ECP16_DATA_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PAR_ECP16_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PAR_ECP16_DATA(f1,v1) ( \
- (R_PAR_ECP16_DATA__data__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR_ECP16_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR_ECP16_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR_ECP16_DATA(f1,v1) ( \
- (R_PAR_ECP16_DATA__data__##f1##__VAL(R_PAR_ECP16_DATA_, data_, v1) << R_PAR_ECP16_DATA__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PAR_ECP16_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PAR_ECP16_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PAR_ECP16_DATA_(f1_,v1) ( \
- (R_PAR_ECP16_DATA__data__##f1_##_VAL(R_PAR_ECP16_DATA_, data_, v1) << R_PAR_ECP16_DATA__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_PHY_COUNTERS
- * - type: RO
- * - addr: 0xb00000ac
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PHY_COUNTERS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PHY_COUNTERS(f1,v1,f2,v2) ( \
- (R_PHY_COUNTERS__sqe_test_error__##f1##__MASK & REG__##v1) | \
- (R_PHY_COUNTERS__carrier_loss__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PHY_COUNTERS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PHY_COUNTERS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PHY_COUNTERS(f1,v1,f2,v2) ( \
- (R_PHY_COUNTERS__sqe_test_error__##f1##__VAL(R_PHY_COUNTERS_, sqe_test_error_, v1) << R_PHY_COUNTERS__sqe_test_error__BITNR) | \
- (R_PHY_COUNTERS__carrier_loss__##f2##__VAL(R_PHY_COUNTERS_, carrier_loss_, v2) << R_PHY_COUNTERS__carrier_loss__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PHY_COUNTERS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PHY_COUNTERS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PHY_COUNTERS_(f1_,v1,f2_,v2) ( \
- (R_PHY_COUNTERS__sqe_test_error__##f1_##_VAL(R_PHY_COUNTERS_, sqe_test_error_, v1) << R_PHY_COUNTERS__sqe_test_error__BITNR) | \
- (R_PHY_COUNTERS__carrier_loss__##f2_##_VAL(R_PHY_COUNTERS_, carrier_loss_, v2) << R_PHY_COUNTERS__carrier_loss__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_G_DATA
- * - type: RW
- * - addr: 0xb0000028
- * - group: General config registers
- */
-
-#if USE_GROUP__General_config_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_G_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_G_DATA.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_G_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_G_DATA(f1,v1) ( \
- R_PORT_G_DATA__WRITE(R_PORT_G_DATA__ADDR, ( \
- REG_VAL__R_PORT_G_DATA_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_G_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_G_DATA(f1,v1) ( \
- (R_PORT_G_DATA__data__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_G_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_G_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_G_DATA(f1,v1) ( \
- (R_PORT_G_DATA__data__##f1##__VAL(R_PORT_G_DATA_, data_, v1) << R_PORT_G_DATA__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_G_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_G_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_G_DATA_(f1_,v1) ( \
- (R_PORT_G_DATA__data__##f1_##_VAL(R_PORT_G_DATA_, data_, v1) << R_PORT_G_DATA__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PA_DATA
- * - type: WO
- * - addr: 0xb0000030
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PA_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PA_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_PA_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PA_DATA(f1,v1) ( \
- *R_PORT_PA_DATA__SADDR = ( \
- REG_INITIATED(R_PORT_PA_DATA_) \
- REG_VAL__R_PORT_PA_DATA_(f1##_,v1) \
- ), \
- R_PORT_PA_DATA__WRITE(R_PORT_PA_DATA__ADDR, *R_PORT_PA_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PA_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PA_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PORT_PA_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PA_DATA__SHADOW(f1,v1) ( \
- *R_PORT_PA_DATA__SADDR = ( \
- REG_INITIATED(R_PORT_PA_DATA_) \
- REG_VAL__R_PORT_PA_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PA_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PA_DATA(f1,v1) ( \
- (R_PORT_PA_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PA_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PA_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PA_DATA(f1,v1) ( \
- (R_PORT_PA_DATA__data_out__##f1##__VAL(R_PORT_PA_DATA_, data_out_, v1) << R_PORT_PA_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PA_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PA_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PA_DATA_(f1_,v1) ( \
- (R_PORT_PA_DATA__data_out__##f1_##_VAL(R_PORT_PA_DATA_, data_out_, v1) << R_PORT_PA_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PA_DIR
- * - type: WO
- * - addr: 0xb0000031
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PA_DIR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PA_DIR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_PA_DIR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PA_DIR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PORT_PA_DIR__SADDR = ( \
- REG_INITIATED(R_PORT_PA_DIR_) \
- REG_VAL__R_PORT_PA_DIR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_PORT_PA_DIR__WRITE(R_PORT_PA_DIR__ADDR, *R_PORT_PA_DIR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PA_DIR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PA_DIR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PORT_PA_DIR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PA_DIR__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PORT_PA_DIR__SADDR = ( \
- REG_INITIATED(R_PORT_PA_DIR_) \
- REG_VAL__R_PORT_PA_DIR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PA_DIR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PA_DIR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PORT_PA_DIR__dir7__##f1##__MASK & REG__##v1) | \
- (R_PORT_PA_DIR__dir6__##f2##__MASK & REG__##v2) | \
- (R_PORT_PA_DIR__dir5__##f3##__MASK & REG__##v3) | \
- (R_PORT_PA_DIR__dir4__##f4##__MASK & REG__##v4) | \
- (R_PORT_PA_DIR__dir3__##f5##__MASK & REG__##v5) | \
- (R_PORT_PA_DIR__dir2__##f6##__MASK & REG__##v6) | \
- (R_PORT_PA_DIR__dir1__##f7##__MASK & REG__##v7) | \
- (R_PORT_PA_DIR__dir0__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PA_DIR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PA_DIR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PA_DIR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PORT_PA_DIR__dir7__##f1##__VAL(R_PORT_PA_DIR_, dir7_, v1) << R_PORT_PA_DIR__dir7__BITNR) | \
- (R_PORT_PA_DIR__dir6__##f2##__VAL(R_PORT_PA_DIR_, dir6_, v2) << R_PORT_PA_DIR__dir6__BITNR) | \
- (R_PORT_PA_DIR__dir5__##f3##__VAL(R_PORT_PA_DIR_, dir5_, v3) << R_PORT_PA_DIR__dir5__BITNR) | \
- (R_PORT_PA_DIR__dir4__##f4##__VAL(R_PORT_PA_DIR_, dir4_, v4) << R_PORT_PA_DIR__dir4__BITNR) | \
- (R_PORT_PA_DIR__dir3__##f5##__VAL(R_PORT_PA_DIR_, dir3_, v5) << R_PORT_PA_DIR__dir3__BITNR) | \
- (R_PORT_PA_DIR__dir2__##f6##__VAL(R_PORT_PA_DIR_, dir2_, v6) << R_PORT_PA_DIR__dir2__BITNR) | \
- (R_PORT_PA_DIR__dir1__##f7##__VAL(R_PORT_PA_DIR_, dir1_, v7) << R_PORT_PA_DIR__dir1__BITNR) | \
- (R_PORT_PA_DIR__dir0__##f8##__VAL(R_PORT_PA_DIR_, dir0_, v8) << R_PORT_PA_DIR__dir0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PA_DIR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PA_DIR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PA_DIR_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_PORT_PA_DIR__dir7__##f1_##_VAL(R_PORT_PA_DIR_, dir7_, v1) << R_PORT_PA_DIR__dir7__BITNR) | \
- (R_PORT_PA_DIR__dir6__##f2_##_VAL(R_PORT_PA_DIR_, dir6_, v2) << R_PORT_PA_DIR__dir6__BITNR) | \
- (R_PORT_PA_DIR__dir5__##f3_##_VAL(R_PORT_PA_DIR_, dir5_, v3) << R_PORT_PA_DIR__dir5__BITNR) | \
- (R_PORT_PA_DIR__dir4__##f4_##_VAL(R_PORT_PA_DIR_, dir4_, v4) << R_PORT_PA_DIR__dir4__BITNR) | \
- (R_PORT_PA_DIR__dir3__##f5_##_VAL(R_PORT_PA_DIR_, dir3_, v5) << R_PORT_PA_DIR__dir3__BITNR) | \
- (R_PORT_PA_DIR__dir2__##f6_##_VAL(R_PORT_PA_DIR_, dir2_, v6) << R_PORT_PA_DIR__dir2__BITNR) | \
- (R_PORT_PA_DIR__dir1__##f7_##_VAL(R_PORT_PA_DIR_, dir1_, v7) << R_PORT_PA_DIR__dir1__BITNR) | \
- (R_PORT_PA_DIR__dir0__##f8_##_VAL(R_PORT_PA_DIR_, dir0_, v8) << R_PORT_PA_DIR__dir0__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PA_READ
- * - type: RO
- * - addr: 0xb0000030
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PA_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PA_READ(f1,v1) ( \
- (R_PORT_PA_READ__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PA_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PA_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PA_READ(f1,v1) ( \
- (R_PORT_PA_READ__data_in__##f1##__VAL(R_PORT_PA_READ_, data_in_, v1) << R_PORT_PA_READ__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PA_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PA_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PA_READ_(f1_,v1) ( \
- (R_PORT_PA_READ__data_in__##f1_##_VAL(R_PORT_PA_READ_, data_in_, v1) << R_PORT_PA_READ__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PA_SET
- * - type: WO
- * - addr: 0xb0000030
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PA_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PA_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_PA_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PA_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- *R_PORT_PA_SET__SADDR = ( \
- REG_INITIATED(R_PORT_PA_SET_) \
- REG_VAL__R_PORT_PA_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9) \
- ), \
- R_PORT_PA_SET__WRITE(R_PORT_PA_SET__ADDR, *R_PORT_PA_SET__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PA_SET__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PA_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PORT_PA_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PA_SET__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- *R_PORT_PA_SET__SADDR = ( \
- REG_INITIATED(R_PORT_PA_SET_) \
- REG_VAL__R_PORT_PA_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PA_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PA_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_PORT_PA_SET__dir7__##f1##__MASK & REG__##v1) | \
- (R_PORT_PA_SET__dir6__##f2##__MASK & REG__##v2) | \
- (R_PORT_PA_SET__dir5__##f3##__MASK & REG__##v3) | \
- (R_PORT_PA_SET__dir4__##f4##__MASK & REG__##v4) | \
- (R_PORT_PA_SET__dir3__##f5##__MASK & REG__##v5) | \
- (R_PORT_PA_SET__dir2__##f6##__MASK & REG__##v6) | \
- (R_PORT_PA_SET__dir1__##f7##__MASK & REG__##v7) | \
- (R_PORT_PA_SET__dir0__##f8##__MASK & REG__##v8) | \
- (R_PORT_PA_SET__data_out__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PA_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PA_SET.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PA_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_PORT_PA_SET__dir7__##f1##__VAL(R_PORT_PA_SET_, dir7_, v1) << R_PORT_PA_SET__dir7__BITNR) | \
- (R_PORT_PA_SET__dir6__##f2##__VAL(R_PORT_PA_SET_, dir6_, v2) << R_PORT_PA_SET__dir6__BITNR) | \
- (R_PORT_PA_SET__dir5__##f3##__VAL(R_PORT_PA_SET_, dir5_, v3) << R_PORT_PA_SET__dir5__BITNR) | \
- (R_PORT_PA_SET__dir4__##f4##__VAL(R_PORT_PA_SET_, dir4_, v4) << R_PORT_PA_SET__dir4__BITNR) | \
- (R_PORT_PA_SET__dir3__##f5##__VAL(R_PORT_PA_SET_, dir3_, v5) << R_PORT_PA_SET__dir3__BITNR) | \
- (R_PORT_PA_SET__dir2__##f6##__VAL(R_PORT_PA_SET_, dir2_, v6) << R_PORT_PA_SET__dir2__BITNR) | \
- (R_PORT_PA_SET__dir1__##f7##__VAL(R_PORT_PA_SET_, dir1_, v7) << R_PORT_PA_SET__dir1__BITNR) | \
- (R_PORT_PA_SET__dir0__##f8##__VAL(R_PORT_PA_SET_, dir0_, v8) << R_PORT_PA_SET__dir0__BITNR) | \
- (R_PORT_PA_SET__data_out__##f9##__VAL(R_PORT_PA_SET_, data_out_, v9) << R_PORT_PA_SET__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PA_SET_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PA_SET.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PA_SET_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_PORT_PA_SET__dir7__##f1_##_VAL(R_PORT_PA_SET_, dir7_, v1) << R_PORT_PA_SET__dir7__BITNR) | \
- (R_PORT_PA_SET__dir6__##f2_##_VAL(R_PORT_PA_SET_, dir6_, v2) << R_PORT_PA_SET__dir6__BITNR) | \
- (R_PORT_PA_SET__dir5__##f3_##_VAL(R_PORT_PA_SET_, dir5_, v3) << R_PORT_PA_SET__dir5__BITNR) | \
- (R_PORT_PA_SET__dir4__##f4_##_VAL(R_PORT_PA_SET_, dir4_, v4) << R_PORT_PA_SET__dir4__BITNR) | \
- (R_PORT_PA_SET__dir3__##f5_##_VAL(R_PORT_PA_SET_, dir3_, v5) << R_PORT_PA_SET__dir3__BITNR) | \
- (R_PORT_PA_SET__dir2__##f6_##_VAL(R_PORT_PA_SET_, dir2_, v6) << R_PORT_PA_SET__dir2__BITNR) | \
- (R_PORT_PA_SET__dir1__##f7_##_VAL(R_PORT_PA_SET_, dir1_, v7) << R_PORT_PA_SET__dir1__BITNR) | \
- (R_PORT_PA_SET__dir0__##f8_##_VAL(R_PORT_PA_SET_, dir0_, v8) << R_PORT_PA_SET__dir0__BITNR) | \
- (R_PORT_PA_SET__data_out__##f9_##_VAL(R_PORT_PA_SET_, data_out_, v9) << R_PORT_PA_SET__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PB_CONFIG
- * - type: WO
- * - addr: 0xb000003a
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_PB_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PORT_PB_CONFIG__SADDR = ( \
- REG_INITIATED(R_PORT_PB_CONFIG_) \
- REG_VAL__R_PORT_PB_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_PORT_PB_CONFIG__WRITE(R_PORT_PB_CONFIG__ADDR, *R_PORT_PB_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PORT_PB_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PORT_PB_CONFIG__SADDR = ( \
- REG_INITIATED(R_PORT_PB_CONFIG_) \
- REG_VAL__R_PORT_PB_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PB_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PB_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PORT_PB_CONFIG__cs7__##f1##__MASK & REG__##v1) | \
- (R_PORT_PB_CONFIG__cs6__##f2##__MASK & REG__##v2) | \
- (R_PORT_PB_CONFIG__cs5__##f3##__MASK & REG__##v3) | \
- (R_PORT_PB_CONFIG__cs4__##f4##__MASK & REG__##v4) | \
- (R_PORT_PB_CONFIG__cs3__##f5##__MASK & REG__##v5) | \
- (R_PORT_PB_CONFIG__cs2__##f6##__MASK & REG__##v6) | \
- (R_PORT_PB_CONFIG__scsi1__##f7##__MASK & REG__##v7) | \
- (R_PORT_PB_CONFIG__scsi0__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PORT_PB_CONFIG__cs7__##f1##__VAL(R_PORT_PB_CONFIG_, cs7_, v1) << R_PORT_PB_CONFIG__cs7__BITNR) | \
- (R_PORT_PB_CONFIG__cs6__##f2##__VAL(R_PORT_PB_CONFIG_, cs6_, v2) << R_PORT_PB_CONFIG__cs6__BITNR) | \
- (R_PORT_PB_CONFIG__cs5__##f3##__VAL(R_PORT_PB_CONFIG_, cs5_, v3) << R_PORT_PB_CONFIG__cs5__BITNR) | \
- (R_PORT_PB_CONFIG__cs4__##f4##__VAL(R_PORT_PB_CONFIG_, cs4_, v4) << R_PORT_PB_CONFIG__cs4__BITNR) | \
- (R_PORT_PB_CONFIG__cs3__##f5##__VAL(R_PORT_PB_CONFIG_, cs3_, v5) << R_PORT_PB_CONFIG__cs3__BITNR) | \
- (R_PORT_PB_CONFIG__cs2__##f6##__VAL(R_PORT_PB_CONFIG_, cs2_, v6) << R_PORT_PB_CONFIG__cs2__BITNR) | \
- (R_PORT_PB_CONFIG__scsi1__##f7##__VAL(R_PORT_PB_CONFIG_, scsi1_, v7) << R_PORT_PB_CONFIG__scsi1__BITNR) | \
- (R_PORT_PB_CONFIG__scsi0__##f8##__VAL(R_PORT_PB_CONFIG_, scsi0_, v8) << R_PORT_PB_CONFIG__scsi0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_PORT_PB_CONFIG__cs7__##f1_##_VAL(R_PORT_PB_CONFIG_, cs7_, v1) << R_PORT_PB_CONFIG__cs7__BITNR) | \
- (R_PORT_PB_CONFIG__cs6__##f2_##_VAL(R_PORT_PB_CONFIG_, cs6_, v2) << R_PORT_PB_CONFIG__cs6__BITNR) | \
- (R_PORT_PB_CONFIG__cs5__##f3_##_VAL(R_PORT_PB_CONFIG_, cs5_, v3) << R_PORT_PB_CONFIG__cs5__BITNR) | \
- (R_PORT_PB_CONFIG__cs4__##f4_##_VAL(R_PORT_PB_CONFIG_, cs4_, v4) << R_PORT_PB_CONFIG__cs4__BITNR) | \
- (R_PORT_PB_CONFIG__cs3__##f5_##_VAL(R_PORT_PB_CONFIG_, cs3_, v5) << R_PORT_PB_CONFIG__cs3__BITNR) | \
- (R_PORT_PB_CONFIG__cs2__##f6_##_VAL(R_PORT_PB_CONFIG_, cs2_, v6) << R_PORT_PB_CONFIG__cs2__BITNR) | \
- (R_PORT_PB_CONFIG__scsi1__##f7_##_VAL(R_PORT_PB_CONFIG_, scsi1_, v7) << R_PORT_PB_CONFIG__scsi1__BITNR) | \
- (R_PORT_PB_CONFIG__scsi0__##f8_##_VAL(R_PORT_PB_CONFIG_, scsi0_, v8) << R_PORT_PB_CONFIG__scsi0__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PB_DATA
- * - type: WO
- * - addr: 0xb0000038
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_PB_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_DATA(f1,v1) ( \
- *R_PORT_PB_DATA__SADDR = ( \
- REG_INITIATED(R_PORT_PB_DATA_) \
- REG_VAL__R_PORT_PB_DATA_(f1##_,v1) \
- ), \
- R_PORT_PB_DATA__WRITE(R_PORT_PB_DATA__ADDR, *R_PORT_PB_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PORT_PB_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_DATA__SHADOW(f1,v1) ( \
- *R_PORT_PB_DATA__SADDR = ( \
- REG_INITIATED(R_PORT_PB_DATA_) \
- REG_VAL__R_PORT_PB_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PB_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PB_DATA(f1,v1) ( \
- (R_PORT_PB_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_DATA(f1,v1) ( \
- (R_PORT_PB_DATA__data_out__##f1##__VAL(R_PORT_PB_DATA_, data_out_, v1) << R_PORT_PB_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_DATA_(f1_,v1) ( \
- (R_PORT_PB_DATA__data_out__##f1_##_VAL(R_PORT_PB_DATA_, data_out_, v1) << R_PORT_PB_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PB_DIR
- * - type: WO
- * - addr: 0xb0000039
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_DIR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_DIR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_PB_DIR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_DIR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PORT_PB_DIR__SADDR = ( \
- REG_INITIATED(R_PORT_PB_DIR_) \
- REG_VAL__R_PORT_PB_DIR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_PORT_PB_DIR__WRITE(R_PORT_PB_DIR__ADDR, *R_PORT_PB_DIR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_DIR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_DIR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PORT_PB_DIR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_DIR__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_PORT_PB_DIR__SADDR = ( \
- REG_INITIATED(R_PORT_PB_DIR_) \
- REG_VAL__R_PORT_PB_DIR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PB_DIR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PB_DIR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PORT_PB_DIR__dir7__##f1##__MASK & REG__##v1) | \
- (R_PORT_PB_DIR__dir6__##f2##__MASK & REG__##v2) | \
- (R_PORT_PB_DIR__dir5__##f3##__MASK & REG__##v3) | \
- (R_PORT_PB_DIR__dir4__##f4##__MASK & REG__##v4) | \
- (R_PORT_PB_DIR__dir3__##f5##__MASK & REG__##v5) | \
- (R_PORT_PB_DIR__dir2__##f6##__MASK & REG__##v6) | \
- (R_PORT_PB_DIR__dir1__##f7##__MASK & REG__##v7) | \
- (R_PORT_PB_DIR__dir0__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_DIR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_DIR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_DIR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_PORT_PB_DIR__dir7__##f1##__VAL(R_PORT_PB_DIR_, dir7_, v1) << R_PORT_PB_DIR__dir7__BITNR) | \
- (R_PORT_PB_DIR__dir6__##f2##__VAL(R_PORT_PB_DIR_, dir6_, v2) << R_PORT_PB_DIR__dir6__BITNR) | \
- (R_PORT_PB_DIR__dir5__##f3##__VAL(R_PORT_PB_DIR_, dir5_, v3) << R_PORT_PB_DIR__dir5__BITNR) | \
- (R_PORT_PB_DIR__dir4__##f4##__VAL(R_PORT_PB_DIR_, dir4_, v4) << R_PORT_PB_DIR__dir4__BITNR) | \
- (R_PORT_PB_DIR__dir3__##f5##__VAL(R_PORT_PB_DIR_, dir3_, v5) << R_PORT_PB_DIR__dir3__BITNR) | \
- (R_PORT_PB_DIR__dir2__##f6##__VAL(R_PORT_PB_DIR_, dir2_, v6) << R_PORT_PB_DIR__dir2__BITNR) | \
- (R_PORT_PB_DIR__dir1__##f7##__VAL(R_PORT_PB_DIR_, dir1_, v7) << R_PORT_PB_DIR__dir1__BITNR) | \
- (R_PORT_PB_DIR__dir0__##f8##__VAL(R_PORT_PB_DIR_, dir0_, v8) << R_PORT_PB_DIR__dir0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_DIR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_DIR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_DIR_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_PORT_PB_DIR__dir7__##f1_##_VAL(R_PORT_PB_DIR_, dir7_, v1) << R_PORT_PB_DIR__dir7__BITNR) | \
- (R_PORT_PB_DIR__dir6__##f2_##_VAL(R_PORT_PB_DIR_, dir6_, v2) << R_PORT_PB_DIR__dir6__BITNR) | \
- (R_PORT_PB_DIR__dir5__##f3_##_VAL(R_PORT_PB_DIR_, dir5_, v3) << R_PORT_PB_DIR__dir5__BITNR) | \
- (R_PORT_PB_DIR__dir4__##f4_##_VAL(R_PORT_PB_DIR_, dir4_, v4) << R_PORT_PB_DIR__dir4__BITNR) | \
- (R_PORT_PB_DIR__dir3__##f5_##_VAL(R_PORT_PB_DIR_, dir3_, v5) << R_PORT_PB_DIR__dir3__BITNR) | \
- (R_PORT_PB_DIR__dir2__##f6_##_VAL(R_PORT_PB_DIR_, dir2_, v6) << R_PORT_PB_DIR__dir2__BITNR) | \
- (R_PORT_PB_DIR__dir1__##f7_##_VAL(R_PORT_PB_DIR_, dir1_, v7) << R_PORT_PB_DIR__dir1__BITNR) | \
- (R_PORT_PB_DIR__dir0__##f8_##_VAL(R_PORT_PB_DIR_, dir0_, v8) << R_PORT_PB_DIR__dir0__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PB_I2C
- * - type: WO
- * - addr: 0xb000003b
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_I2C
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_I2C.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_PB_I2C.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_I2C(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_PORT_PB_I2C__SADDR = ( \
- REG_INITIATED(R_PORT_PB_I2C_) \
- REG_VAL__R_PORT_PB_I2C_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ), \
- R_PORT_PB_I2C__WRITE(R_PORT_PB_I2C__ADDR, *R_PORT_PB_I2C__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_I2C__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_I2C.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PORT_PB_I2C.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_I2C__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_PORT_PB_I2C__SADDR = ( \
- REG_INITIATED(R_PORT_PB_I2C_) \
- REG_VAL__R_PORT_PB_I2C_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PB_I2C
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PB_I2C(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_PORT_PB_I2C__syncser3__##f1##__MASK & REG__##v1) | \
- (R_PORT_PB_I2C__syncser1__##f2##__MASK & REG__##v2) | \
- (R_PORT_PB_I2C__i2c_en__##f3##__MASK & REG__##v3) | \
- (R_PORT_PB_I2C__i2c_d__##f4##__MASK & REG__##v4) | \
- (R_PORT_PB_I2C__i2c_clk__##f5##__MASK & REG__##v5) | \
- (R_PORT_PB_I2C__i2c_oe___##f6##__MASK & REG__##v6) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_I2C
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_I2C.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_I2C(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_PORT_PB_I2C__syncser3__##f1##__VAL(R_PORT_PB_I2C_, syncser3_, v1) << R_PORT_PB_I2C__syncser3__BITNR) | \
- (R_PORT_PB_I2C__syncser1__##f2##__VAL(R_PORT_PB_I2C_, syncser1_, v2) << R_PORT_PB_I2C__syncser1__BITNR) | \
- (R_PORT_PB_I2C__i2c_en__##f3##__VAL(R_PORT_PB_I2C_, i2c_en_, v3) << R_PORT_PB_I2C__i2c_en__BITNR) | \
- (R_PORT_PB_I2C__i2c_d__##f4##__VAL(R_PORT_PB_I2C_, i2c_d_, v4) << R_PORT_PB_I2C__i2c_d__BITNR) | \
- (R_PORT_PB_I2C__i2c_clk__##f5##__VAL(R_PORT_PB_I2C_, i2c_clk_, v5) << R_PORT_PB_I2C__i2c_clk__BITNR) | \
- (R_PORT_PB_I2C__i2c_oe___##f6##__VAL(R_PORT_PB_I2C_, i2c_oe__, v6) << R_PORT_PB_I2C__i2c_oe___BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_I2C_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_I2C.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_I2C_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6) ( \
- (R_PORT_PB_I2C__syncser3__##f1_##_VAL(R_PORT_PB_I2C_, syncser3_, v1) << R_PORT_PB_I2C__syncser3__BITNR) | \
- (R_PORT_PB_I2C__syncser1__##f2_##_VAL(R_PORT_PB_I2C_, syncser1_, v2) << R_PORT_PB_I2C__syncser1__BITNR) | \
- (R_PORT_PB_I2C__i2c_en__##f3_##_VAL(R_PORT_PB_I2C_, i2c_en_, v3) << R_PORT_PB_I2C__i2c_en__BITNR) | \
- (R_PORT_PB_I2C__i2c_d__##f4_##_VAL(R_PORT_PB_I2C_, i2c_d_, v4) << R_PORT_PB_I2C__i2c_d__BITNR) | \
- (R_PORT_PB_I2C__i2c_clk__##f5_##_VAL(R_PORT_PB_I2C_, i2c_clk_, v5) << R_PORT_PB_I2C__i2c_clk__BITNR) | \
- (R_PORT_PB_I2C__i2c_oe___##f6_##_VAL(R_PORT_PB_I2C_, i2c_oe__, v6) << R_PORT_PB_I2C__i2c_oe___BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PB_READ
- * - type: RO
- * - addr: 0xb0000038
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PB_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PB_READ(f1,v1) ( \
- (R_PORT_PB_READ__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_READ(f1,v1) ( \
- (R_PORT_PB_READ__data_in__##f1##__VAL(R_PORT_PB_READ_, data_in_, v1) << R_PORT_PB_READ__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_READ_(f1_,v1) ( \
- (R_PORT_PB_READ__data_in__##f1_##_VAL(R_PORT_PB_READ_, data_in_, v1) << R_PORT_PB_READ__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_PORT_PB_SET
- * - type: WO
- * - addr: 0xb0000038
- * - group: General port configuration registers
- */
-
-#if USE_GROUP__General_port_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_PORT_PB_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- *R_PORT_PB_SET__SADDR = ( \
- REG_INITIATED(R_PORT_PB_SET_) \
- REG_VAL__R_PORT_PB_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23) \
- ), \
- R_PORT_PB_SET__WRITE(R_PORT_PB_SET__ADDR, *R_PORT_PB_SET__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_PORT_PB_SET__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_PORT_PB_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_PORT_PB_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_PORT_PB_SET__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- *R_PORT_PB_SET__SADDR = ( \
- REG_INITIATED(R_PORT_PB_SET_) \
- REG_VAL__R_PORT_PB_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PORT_PB_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PORT_PB_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- (R_PORT_PB_SET__syncser3__##f1##__MASK & REG__##v1) | \
- (R_PORT_PB_SET__syncser1__##f2##__MASK & REG__##v2) | \
- (R_PORT_PB_SET__i2c_en__##f3##__MASK & REG__##v3) | \
- (R_PORT_PB_SET__i2c_d__##f4##__MASK & REG__##v4) | \
- (R_PORT_PB_SET__i2c_clk__##f5##__MASK & REG__##v5) | \
- (R_PORT_PB_SET__i2c_oe___##f6##__MASK & REG__##v6) | \
- (R_PORT_PB_SET__cs7__##f7##__MASK & REG__##v7) | \
- (R_PORT_PB_SET__cs6__##f8##__MASK & REG__##v8) | \
- (R_PORT_PB_SET__cs5__##f9##__MASK & REG__##v9) | \
- (R_PORT_PB_SET__cs4__##f10##__MASK & REG__##v10) | \
- (R_PORT_PB_SET__cs3__##f11##__MASK & REG__##v11) | \
- (R_PORT_PB_SET__cs2__##f12##__MASK & REG__##v12) | \
- (R_PORT_PB_SET__scsi1__##f13##__MASK & REG__##v13) | \
- (R_PORT_PB_SET__scsi0__##f14##__MASK & REG__##v14) | \
- (R_PORT_PB_SET__dir7__##f15##__MASK & REG__##v15) | \
- (R_PORT_PB_SET__dir6__##f16##__MASK & REG__##v16) | \
- (R_PORT_PB_SET__dir5__##f17##__MASK & REG__##v17) | \
- (R_PORT_PB_SET__dir4__##f18##__MASK & REG__##v18) | \
- (R_PORT_PB_SET__dir3__##f19##__MASK & REG__##v19) | \
- (R_PORT_PB_SET__dir2__##f20##__MASK & REG__##v20) | \
- (R_PORT_PB_SET__dir1__##f21##__MASK & REG__##v21) | \
- (R_PORT_PB_SET__dir0__##f22##__MASK & REG__##v22) | \
- (R_PORT_PB_SET__data_out__##f23##__MASK & REG__##v23) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_SET.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- (R_PORT_PB_SET__syncser3__##f1##__VAL(R_PORT_PB_SET_, syncser3_, v1) << R_PORT_PB_SET__syncser3__BITNR) | \
- (R_PORT_PB_SET__syncser1__##f2##__VAL(R_PORT_PB_SET_, syncser1_, v2) << R_PORT_PB_SET__syncser1__BITNR) | \
- (R_PORT_PB_SET__i2c_en__##f3##__VAL(R_PORT_PB_SET_, i2c_en_, v3) << R_PORT_PB_SET__i2c_en__BITNR) | \
- (R_PORT_PB_SET__i2c_d__##f4##__VAL(R_PORT_PB_SET_, i2c_d_, v4) << R_PORT_PB_SET__i2c_d__BITNR) | \
- (R_PORT_PB_SET__i2c_clk__##f5##__VAL(R_PORT_PB_SET_, i2c_clk_, v5) << R_PORT_PB_SET__i2c_clk__BITNR) | \
- (R_PORT_PB_SET__i2c_oe___##f6##__VAL(R_PORT_PB_SET_, i2c_oe__, v6) << R_PORT_PB_SET__i2c_oe___BITNR) | \
- (R_PORT_PB_SET__cs7__##f7##__VAL(R_PORT_PB_SET_, cs7_, v7) << R_PORT_PB_SET__cs7__BITNR) | \
- (R_PORT_PB_SET__cs6__##f8##__VAL(R_PORT_PB_SET_, cs6_, v8) << R_PORT_PB_SET__cs6__BITNR) | \
- (R_PORT_PB_SET__cs5__##f9##__VAL(R_PORT_PB_SET_, cs5_, v9) << R_PORT_PB_SET__cs5__BITNR) | \
- (R_PORT_PB_SET__cs4__##f10##__VAL(R_PORT_PB_SET_, cs4_, v10) << R_PORT_PB_SET__cs4__BITNR) | \
- (R_PORT_PB_SET__cs3__##f11##__VAL(R_PORT_PB_SET_, cs3_, v11) << R_PORT_PB_SET__cs3__BITNR) | \
- (R_PORT_PB_SET__cs2__##f12##__VAL(R_PORT_PB_SET_, cs2_, v12) << R_PORT_PB_SET__cs2__BITNR) | \
- (R_PORT_PB_SET__scsi1__##f13##__VAL(R_PORT_PB_SET_, scsi1_, v13) << R_PORT_PB_SET__scsi1__BITNR) | \
- (R_PORT_PB_SET__scsi0__##f14##__VAL(R_PORT_PB_SET_, scsi0_, v14) << R_PORT_PB_SET__scsi0__BITNR) | \
- (R_PORT_PB_SET__dir7__##f15##__VAL(R_PORT_PB_SET_, dir7_, v15) << R_PORT_PB_SET__dir7__BITNR) | \
- (R_PORT_PB_SET__dir6__##f16##__VAL(R_PORT_PB_SET_, dir6_, v16) << R_PORT_PB_SET__dir6__BITNR) | \
- (R_PORT_PB_SET__dir5__##f17##__VAL(R_PORT_PB_SET_, dir5_, v17) << R_PORT_PB_SET__dir5__BITNR) | \
- (R_PORT_PB_SET__dir4__##f18##__VAL(R_PORT_PB_SET_, dir4_, v18) << R_PORT_PB_SET__dir4__BITNR) | \
- (R_PORT_PB_SET__dir3__##f19##__VAL(R_PORT_PB_SET_, dir3_, v19) << R_PORT_PB_SET__dir3__BITNR) | \
- (R_PORT_PB_SET__dir2__##f20##__VAL(R_PORT_PB_SET_, dir2_, v20) << R_PORT_PB_SET__dir2__BITNR) | \
- (R_PORT_PB_SET__dir1__##f21##__VAL(R_PORT_PB_SET_, dir1_, v21) << R_PORT_PB_SET__dir1__BITNR) | \
- (R_PORT_PB_SET__dir0__##f22##__VAL(R_PORT_PB_SET_, dir0_, v22) << R_PORT_PB_SET__dir0__BITNR) | \
- (R_PORT_PB_SET__data_out__##f23##__VAL(R_PORT_PB_SET_, data_out_, v23) << R_PORT_PB_SET__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PORT_PB_SET_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PORT_PB_SET.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PORT_PB_SET_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23) ( \
- (R_PORT_PB_SET__syncser3__##f1_##_VAL(R_PORT_PB_SET_, syncser3_, v1) << R_PORT_PB_SET__syncser3__BITNR) | \
- (R_PORT_PB_SET__syncser1__##f2_##_VAL(R_PORT_PB_SET_, syncser1_, v2) << R_PORT_PB_SET__syncser1__BITNR) | \
- (R_PORT_PB_SET__i2c_en__##f3_##_VAL(R_PORT_PB_SET_, i2c_en_, v3) << R_PORT_PB_SET__i2c_en__BITNR) | \
- (R_PORT_PB_SET__i2c_d__##f4_##_VAL(R_PORT_PB_SET_, i2c_d_, v4) << R_PORT_PB_SET__i2c_d__BITNR) | \
- (R_PORT_PB_SET__i2c_clk__##f5_##_VAL(R_PORT_PB_SET_, i2c_clk_, v5) << R_PORT_PB_SET__i2c_clk__BITNR) | \
- (R_PORT_PB_SET__i2c_oe___##f6_##_VAL(R_PORT_PB_SET_, i2c_oe__, v6) << R_PORT_PB_SET__i2c_oe___BITNR) | \
- (R_PORT_PB_SET__cs7__##f7_##_VAL(R_PORT_PB_SET_, cs7_, v7) << R_PORT_PB_SET__cs7__BITNR) | \
- (R_PORT_PB_SET__cs6__##f8_##_VAL(R_PORT_PB_SET_, cs6_, v8) << R_PORT_PB_SET__cs6__BITNR) | \
- (R_PORT_PB_SET__cs5__##f9_##_VAL(R_PORT_PB_SET_, cs5_, v9) << R_PORT_PB_SET__cs5__BITNR) | \
- (R_PORT_PB_SET__cs4__##f10_##_VAL(R_PORT_PB_SET_, cs4_, v10) << R_PORT_PB_SET__cs4__BITNR) | \
- (R_PORT_PB_SET__cs3__##f11_##_VAL(R_PORT_PB_SET_, cs3_, v11) << R_PORT_PB_SET__cs3__BITNR) | \
- (R_PORT_PB_SET__cs2__##f12_##_VAL(R_PORT_PB_SET_, cs2_, v12) << R_PORT_PB_SET__cs2__BITNR) | \
- (R_PORT_PB_SET__scsi1__##f13_##_VAL(R_PORT_PB_SET_, scsi1_, v13) << R_PORT_PB_SET__scsi1__BITNR) | \
- (R_PORT_PB_SET__scsi0__##f14_##_VAL(R_PORT_PB_SET_, scsi0_, v14) << R_PORT_PB_SET__scsi0__BITNR) | \
- (R_PORT_PB_SET__dir7__##f15_##_VAL(R_PORT_PB_SET_, dir7_, v15) << R_PORT_PB_SET__dir7__BITNR) | \
- (R_PORT_PB_SET__dir6__##f16_##_VAL(R_PORT_PB_SET_, dir6_, v16) << R_PORT_PB_SET__dir6__BITNR) | \
- (R_PORT_PB_SET__dir5__##f17_##_VAL(R_PORT_PB_SET_, dir5_, v17) << R_PORT_PB_SET__dir5__BITNR) | \
- (R_PORT_PB_SET__dir4__##f18_##_VAL(R_PORT_PB_SET_, dir4_, v18) << R_PORT_PB_SET__dir4__BITNR) | \
- (R_PORT_PB_SET__dir3__##f19_##_VAL(R_PORT_PB_SET_, dir3_, v19) << R_PORT_PB_SET__dir3__BITNR) | \
- (R_PORT_PB_SET__dir2__##f20_##_VAL(R_PORT_PB_SET_, dir2_, v20) << R_PORT_PB_SET__dir2__BITNR) | \
- (R_PORT_PB_SET__dir1__##f21_##_VAL(R_PORT_PB_SET_, dir1_, v21) << R_PORT_PB_SET__dir1__BITNR) | \
- (R_PORT_PB_SET__dir0__##f22_##_VAL(R_PORT_PB_SET_, dir0_, v22) << R_PORT_PB_SET__dir0__BITNR) | \
- (R_PORT_PB_SET__data_out__##f23_##_VAL(R_PORT_PB_SET_, data_out_, v23) << R_PORT_PB_SET__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_PRESCALE_STATUS
- * - type: RO
- * - addr: 0xb00000f0
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_PRESCALE_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_PRESCALE_STATUS(f1,v1,f2,v2) ( \
- (R_PRESCALE_STATUS__ser_status__##f1##__MASK & REG__##v1) | \
- (R_PRESCALE_STATUS__tim_status__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PRESCALE_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PRESCALE_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_PRESCALE_STATUS(f1,v1,f2,v2) ( \
- (R_PRESCALE_STATUS__ser_status__##f1##__VAL(R_PRESCALE_STATUS_, ser_status_, v1) << R_PRESCALE_STATUS__ser_status__BITNR) | \
- (R_PRESCALE_STATUS__tim_status__##f2##__VAL(R_PRESCALE_STATUS_, tim_status_, v2) << R_PRESCALE_STATUS__tim_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_PRESCALE_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_PRESCALE_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_PRESCALE_STATUS_(f1_,v1,f2_,v2) ( \
- (R_PRESCALE_STATUS__ser_status__##f1_##_VAL(R_PRESCALE_STATUS_, ser_status_, v1) << R_PRESCALE_STATUS__ser_status__BITNR) | \
- (R_PRESCALE_STATUS__tim_status__##f2_##_VAL(R_PRESCALE_STATUS_, tim_status_, v2) << R_PRESCALE_STATUS__tim_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_REC_COUNTERS
- * - type: RO
- * - addr: 0xb00000a4
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_REC_COUNTERS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_REC_COUNTERS(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_REC_COUNTERS__congestion__##f1##__MASK & REG__##v1) | \
- (R_REC_COUNTERS__oversize__##f2##__MASK & REG__##v2) | \
- (R_REC_COUNTERS__alignment_error__##f3##__MASK & REG__##v3) | \
- (R_REC_COUNTERS__crc_error__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_REC_COUNTERS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_REC_COUNTERS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_REC_COUNTERS(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_REC_COUNTERS__congestion__##f1##__VAL(R_REC_COUNTERS_, congestion_, v1) << R_REC_COUNTERS__congestion__BITNR) | \
- (R_REC_COUNTERS__oversize__##f2##__VAL(R_REC_COUNTERS_, oversize_, v2) << R_REC_COUNTERS__oversize__BITNR) | \
- (R_REC_COUNTERS__alignment_error__##f3##__VAL(R_REC_COUNTERS_, alignment_error_, v3) << R_REC_COUNTERS__alignment_error__BITNR) | \
- (R_REC_COUNTERS__crc_error__##f4##__VAL(R_REC_COUNTERS_, crc_error_, v4) << R_REC_COUNTERS__crc_error__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_REC_COUNTERS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_REC_COUNTERS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_REC_COUNTERS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_REC_COUNTERS__congestion__##f1_##_VAL(R_REC_COUNTERS_, congestion_, v1) << R_REC_COUNTERS__congestion__BITNR) | \
- (R_REC_COUNTERS__oversize__##f2_##_VAL(R_REC_COUNTERS_, oversize_, v2) << R_REC_COUNTERS__oversize__BITNR) | \
- (R_REC_COUNTERS__alignment_error__##f3_##_VAL(R_REC_COUNTERS_, alignment_error_, v3) << R_REC_COUNTERS__alignment_error__BITNR) | \
- (R_REC_COUNTERS__crc_error__##f4_##_VAL(R_REC_COUNTERS_, crc_error_, v4) << R_REC_COUNTERS__crc_error__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI0_CMD
- * - type: WO
- * - addr: 0xb0000042
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_CMD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI0_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_CMD(f1,v1,f2,v2) ( \
- *R_SCSI0_CMD__SADDR = ( \
- REG_INITIATED(R_SCSI0_CMD_) \
- REG_VAL__R_SCSI0_CMD_(f1##_,v1,f2##_,v2) \
- ), \
- R_SCSI0_CMD__WRITE(R_SCSI0_CMD__ADDR, *R_SCSI0_CMD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_CMD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_CMD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI0_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_CMD__SHADOW(f1,v1,f2,v2) ( \
- *R_SCSI0_CMD__SADDR = ( \
- REG_INITIATED(R_SCSI0_CMD_) \
- REG_VAL__R_SCSI0_CMD_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI0_CMD(f1,v1,f2,v2) ( \
- (R_SCSI0_CMD__asynch_setup__##f1##__MASK & REG__##v1) | \
- (R_SCSI0_CMD__command__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_CMD(f1,v1,f2,v2) ( \
- (R_SCSI0_CMD__asynch_setup__##f1##__VAL(R_SCSI0_CMD_, asynch_setup_, v1) << R_SCSI0_CMD__asynch_setup__BITNR) | \
- (R_SCSI0_CMD__command__##f2##__VAL(R_SCSI0_CMD_, command_, v2) << R_SCSI0_CMD__command__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_CMD_(f1_,v1,f2_,v2) ( \
- (R_SCSI0_CMD__asynch_setup__##f1_##_VAL(R_SCSI0_CMD_, asynch_setup_, v1) << R_SCSI0_CMD__asynch_setup__BITNR) | \
- (R_SCSI0_CMD__command__##f2_##_VAL(R_SCSI0_CMD_, command_, v2) << R_SCSI0_CMD__command__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI0_CMD_DATA
- * - type: WO
- * - addr: 0xb0000040
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_CMD_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_CMD_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI0_CMD_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_CMD_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_SCSI0_CMD_DATA__SADDR = ( \
- REG_INITIATED(R_SCSI0_CMD_DATA_) \
- REG_VAL__R_SCSI0_CMD_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ), \
- R_SCSI0_CMD_DATA__WRITE(R_SCSI0_CMD_DATA__ADDR, *R_SCSI0_CMD_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_CMD_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_CMD_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI0_CMD_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_CMD_DATA__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_SCSI0_CMD_DATA__SADDR = ( \
- REG_INITIATED(R_SCSI0_CMD_DATA_) \
- REG_VAL__R_SCSI0_CMD_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI0_CMD_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI0_CMD_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_SCSI0_CMD_DATA__parity_in__##f1##__MASK & REG__##v1) | \
- (R_SCSI0_CMD_DATA__skip__##f2##__MASK & REG__##v2) | \
- (R_SCSI0_CMD_DATA__clr_status__##f3##__MASK & REG__##v3) | \
- (R_SCSI0_CMD_DATA__asynch_setup__##f4##__MASK & REG__##v4) | \
- (R_SCSI0_CMD_DATA__command__##f5##__MASK & REG__##v5) | \
- (R_SCSI0_CMD_DATA__data_out__##f6##__MASK & REG__##v6) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_CMD_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_CMD_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_CMD_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_SCSI0_CMD_DATA__parity_in__##f1##__VAL(R_SCSI0_CMD_DATA_, parity_in_, v1) << R_SCSI0_CMD_DATA__parity_in__BITNR) | \
- (R_SCSI0_CMD_DATA__skip__##f2##__VAL(R_SCSI0_CMD_DATA_, skip_, v2) << R_SCSI0_CMD_DATA__skip__BITNR) | \
- (R_SCSI0_CMD_DATA__clr_status__##f3##__VAL(R_SCSI0_CMD_DATA_, clr_status_, v3) << R_SCSI0_CMD_DATA__clr_status__BITNR) | \
- (R_SCSI0_CMD_DATA__asynch_setup__##f4##__VAL(R_SCSI0_CMD_DATA_, asynch_setup_, v4) << R_SCSI0_CMD_DATA__asynch_setup__BITNR) | \
- (R_SCSI0_CMD_DATA__command__##f5##__VAL(R_SCSI0_CMD_DATA_, command_, v5) << R_SCSI0_CMD_DATA__command__BITNR) | \
- (R_SCSI0_CMD_DATA__data_out__##f6##__VAL(R_SCSI0_CMD_DATA_, data_out_, v6) << R_SCSI0_CMD_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_CMD_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_CMD_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_CMD_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6) ( \
- (R_SCSI0_CMD_DATA__parity_in__##f1_##_VAL(R_SCSI0_CMD_DATA_, parity_in_, v1) << R_SCSI0_CMD_DATA__parity_in__BITNR) | \
- (R_SCSI0_CMD_DATA__skip__##f2_##_VAL(R_SCSI0_CMD_DATA_, skip_, v2) << R_SCSI0_CMD_DATA__skip__BITNR) | \
- (R_SCSI0_CMD_DATA__clr_status__##f3_##_VAL(R_SCSI0_CMD_DATA_, clr_status_, v3) << R_SCSI0_CMD_DATA__clr_status__BITNR) | \
- (R_SCSI0_CMD_DATA__asynch_setup__##f4_##_VAL(R_SCSI0_CMD_DATA_, asynch_setup_, v4) << R_SCSI0_CMD_DATA__asynch_setup__BITNR) | \
- (R_SCSI0_CMD_DATA__command__##f5_##_VAL(R_SCSI0_CMD_DATA_, command_, v5) << R_SCSI0_CMD_DATA__command__BITNR) | \
- (R_SCSI0_CMD_DATA__data_out__##f6_##_VAL(R_SCSI0_CMD_DATA_, data_out_, v6) << R_SCSI0_CMD_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI0_CTRL
- * - type: WO
- * - addr: 0xb0000044
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI0_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- *R_SCSI0_CTRL__SADDR = ( \
- REG_INITIATED(R_SCSI0_CTRL_) \
- REG_VAL__R_SCSI0_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11) \
- ), \
- R_SCSI0_CTRL__WRITE(R_SCSI0_CTRL__ADDR, *R_SCSI0_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI0_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- *R_SCSI0_CTRL__SADDR = ( \
- REG_INITIATED(R_SCSI0_CTRL_) \
- REG_VAL__R_SCSI0_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI0_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- (R_SCSI0_CTRL__id_type__##f1##__MASK & REG__##v1) | \
- (R_SCSI0_CTRL__sel_timeout__##f2##__MASK & REG__##v2) | \
- (R_SCSI0_CTRL__synch_per__##f3##__MASK & REG__##v3) | \
- (R_SCSI0_CTRL__rst__##f4##__MASK & REG__##v4) | \
- (R_SCSI0_CTRL__atn__##f5##__MASK & REG__##v5) | \
- (R_SCSI0_CTRL__my_id__##f6##__MASK & REG__##v6) | \
- (R_SCSI0_CTRL__target_id__##f7##__MASK & REG__##v7) | \
- (R_SCSI0_CTRL__fast_20__##f8##__MASK & REG__##v8) | \
- (R_SCSI0_CTRL__bus_width__##f9##__MASK & REG__##v9) | \
- (R_SCSI0_CTRL__synch__##f10##__MASK & REG__##v10) | \
- (R_SCSI0_CTRL__enable__##f11##__MASK & REG__##v11) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- (R_SCSI0_CTRL__id_type__##f1##__VAL(R_SCSI0_CTRL_, id_type_, v1) << R_SCSI0_CTRL__id_type__BITNR) | \
- (R_SCSI0_CTRL__sel_timeout__##f2##__VAL(R_SCSI0_CTRL_, sel_timeout_, v2) << R_SCSI0_CTRL__sel_timeout__BITNR) | \
- (R_SCSI0_CTRL__synch_per__##f3##__VAL(R_SCSI0_CTRL_, synch_per_, v3) << R_SCSI0_CTRL__synch_per__BITNR) | \
- (R_SCSI0_CTRL__rst__##f4##__VAL(R_SCSI0_CTRL_, rst_, v4) << R_SCSI0_CTRL__rst__BITNR) | \
- (R_SCSI0_CTRL__atn__##f5##__VAL(R_SCSI0_CTRL_, atn_, v5) << R_SCSI0_CTRL__atn__BITNR) | \
- (R_SCSI0_CTRL__my_id__##f6##__VAL(R_SCSI0_CTRL_, my_id_, v6) << R_SCSI0_CTRL__my_id__BITNR) | \
- (R_SCSI0_CTRL__target_id__##f7##__VAL(R_SCSI0_CTRL_, target_id_, v7) << R_SCSI0_CTRL__target_id__BITNR) | \
- (R_SCSI0_CTRL__fast_20__##f8##__VAL(R_SCSI0_CTRL_, fast_20_, v8) << R_SCSI0_CTRL__fast_20__BITNR) | \
- (R_SCSI0_CTRL__bus_width__##f9##__VAL(R_SCSI0_CTRL_, bus_width_, v9) << R_SCSI0_CTRL__bus_width__BITNR) | \
- (R_SCSI0_CTRL__synch__##f10##__VAL(R_SCSI0_CTRL_, synch_, v10) << R_SCSI0_CTRL__synch__BITNR) | \
- (R_SCSI0_CTRL__enable__##f11##__VAL(R_SCSI0_CTRL_, enable_, v11) << R_SCSI0_CTRL__enable__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11) ( \
- (R_SCSI0_CTRL__id_type__##f1_##_VAL(R_SCSI0_CTRL_, id_type_, v1) << R_SCSI0_CTRL__id_type__BITNR) | \
- (R_SCSI0_CTRL__sel_timeout__##f2_##_VAL(R_SCSI0_CTRL_, sel_timeout_, v2) << R_SCSI0_CTRL__sel_timeout__BITNR) | \
- (R_SCSI0_CTRL__synch_per__##f3_##_VAL(R_SCSI0_CTRL_, synch_per_, v3) << R_SCSI0_CTRL__synch_per__BITNR) | \
- (R_SCSI0_CTRL__rst__##f4_##_VAL(R_SCSI0_CTRL_, rst_, v4) << R_SCSI0_CTRL__rst__BITNR) | \
- (R_SCSI0_CTRL__atn__##f5_##_VAL(R_SCSI0_CTRL_, atn_, v5) << R_SCSI0_CTRL__atn__BITNR) | \
- (R_SCSI0_CTRL__my_id__##f6_##_VAL(R_SCSI0_CTRL_, my_id_, v6) << R_SCSI0_CTRL__my_id__BITNR) | \
- (R_SCSI0_CTRL__target_id__##f7_##_VAL(R_SCSI0_CTRL_, target_id_, v7) << R_SCSI0_CTRL__target_id__BITNR) | \
- (R_SCSI0_CTRL__fast_20__##f8_##_VAL(R_SCSI0_CTRL_, fast_20_, v8) << R_SCSI0_CTRL__fast_20__BITNR) | \
- (R_SCSI0_CTRL__bus_width__##f9_##_VAL(R_SCSI0_CTRL_, bus_width_, v9) << R_SCSI0_CTRL__bus_width__BITNR) | \
- (R_SCSI0_CTRL__synch__##f10_##_VAL(R_SCSI0_CTRL_, synch_, v10) << R_SCSI0_CTRL__synch__BITNR) | \
- (R_SCSI0_CTRL__enable__##f11_##_VAL(R_SCSI0_CTRL_, enable_, v11) << R_SCSI0_CTRL__enable__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI0_DATA
- * - type: WO
- * - addr: 0xb0000040
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI0_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_DATA(f1,v1) ( \
- *R_SCSI0_DATA__SADDR = ( \
- REG_INITIATED(R_SCSI0_DATA_) \
- REG_VAL__R_SCSI0_DATA_(f1##_,v1) \
- ), \
- R_SCSI0_DATA__WRITE(R_SCSI0_DATA__ADDR, *R_SCSI0_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI0_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_DATA__SHADOW(f1,v1) ( \
- *R_SCSI0_DATA__SADDR = ( \
- REG_INITIATED(R_SCSI0_DATA_) \
- REG_VAL__R_SCSI0_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI0_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI0_DATA(f1,v1) ( \
- (R_SCSI0_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_DATA(f1,v1) ( \
- (R_SCSI0_DATA__data_out__##f1##__VAL(R_SCSI0_DATA_, data_out_, v1) << R_SCSI0_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_DATA_(f1_,v1) ( \
- (R_SCSI0_DATA__data_out__##f1_##_VAL(R_SCSI0_DATA_, data_out_, v1) << R_SCSI0_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI0_DATA_IN
- * - type: RO
- * - addr: 0xb0000040
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI0_DATA_IN
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI0_DATA_IN(f1,v1) ( \
- (R_SCSI0_DATA_IN__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_DATA_IN
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_DATA_IN.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_DATA_IN(f1,v1) ( \
- (R_SCSI0_DATA_IN__data_in__##f1##__VAL(R_SCSI0_DATA_IN_, data_in_, v1) << R_SCSI0_DATA_IN__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_DATA_IN_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_DATA_IN.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_DATA_IN_(f1_,v1) ( \
- (R_SCSI0_DATA_IN__data_in__##f1_##_VAL(R_SCSI0_DATA_IN_, data_in_, v1) << R_SCSI0_DATA_IN__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI0_STATUS
- * - type: RO
- * - addr: 0xb0000048
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI0_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI0_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_SCSI0_STATUS__tst_arb_won__##f1##__MASK & REG__##v1) | \
- (R_SCSI0_STATUS__tst_resel__##f2##__MASK & REG__##v2) | \
- (R_SCSI0_STATUS__parity_error__##f3##__MASK & REG__##v3) | \
- (R_SCSI0_STATUS__bus_reset__##f4##__MASK & REG__##v4) | \
- (R_SCSI0_STATUS__resel_target__##f5##__MASK & REG__##v5) | \
- (R_SCSI0_STATUS__resel__##f6##__MASK & REG__##v6) | \
- (R_SCSI0_STATUS__curr_phase__##f7##__MASK & REG__##v7) | \
- (R_SCSI0_STATUS__last_seq_step__##f8##__MASK & REG__##v8) | \
- (R_SCSI0_STATUS__valid_status__##f9##__MASK & REG__##v9) | \
- (R_SCSI0_STATUS__seq_status__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_SCSI0_STATUS__tst_arb_won__##f1##__VAL(R_SCSI0_STATUS_, tst_arb_won_, v1) << R_SCSI0_STATUS__tst_arb_won__BITNR) | \
- (R_SCSI0_STATUS__tst_resel__##f2##__VAL(R_SCSI0_STATUS_, tst_resel_, v2) << R_SCSI0_STATUS__tst_resel__BITNR) | \
- (R_SCSI0_STATUS__parity_error__##f3##__VAL(R_SCSI0_STATUS_, parity_error_, v3) << R_SCSI0_STATUS__parity_error__BITNR) | \
- (R_SCSI0_STATUS__bus_reset__##f4##__VAL(R_SCSI0_STATUS_, bus_reset_, v4) << R_SCSI0_STATUS__bus_reset__BITNR) | \
- (R_SCSI0_STATUS__resel_target__##f5##__VAL(R_SCSI0_STATUS_, resel_target_, v5) << R_SCSI0_STATUS__resel_target__BITNR) | \
- (R_SCSI0_STATUS__resel__##f6##__VAL(R_SCSI0_STATUS_, resel_, v6) << R_SCSI0_STATUS__resel__BITNR) | \
- (R_SCSI0_STATUS__curr_phase__##f7##__VAL(R_SCSI0_STATUS_, curr_phase_, v7) << R_SCSI0_STATUS__curr_phase__BITNR) | \
- (R_SCSI0_STATUS__last_seq_step__##f8##__VAL(R_SCSI0_STATUS_, last_seq_step_, v8) << R_SCSI0_STATUS__last_seq_step__BITNR) | \
- (R_SCSI0_STATUS__valid_status__##f9##__VAL(R_SCSI0_STATUS_, valid_status_, v9) << R_SCSI0_STATUS__valid_status__BITNR) | \
- (R_SCSI0_STATUS__seq_status__##f10##__VAL(R_SCSI0_STATUS_, seq_status_, v10) << R_SCSI0_STATUS__seq_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_SCSI0_STATUS__tst_arb_won__##f1_##_VAL(R_SCSI0_STATUS_, tst_arb_won_, v1) << R_SCSI0_STATUS__tst_arb_won__BITNR) | \
- (R_SCSI0_STATUS__tst_resel__##f2_##_VAL(R_SCSI0_STATUS_, tst_resel_, v2) << R_SCSI0_STATUS__tst_resel__BITNR) | \
- (R_SCSI0_STATUS__parity_error__##f3_##_VAL(R_SCSI0_STATUS_, parity_error_, v3) << R_SCSI0_STATUS__parity_error__BITNR) | \
- (R_SCSI0_STATUS__bus_reset__##f4_##_VAL(R_SCSI0_STATUS_, bus_reset_, v4) << R_SCSI0_STATUS__bus_reset__BITNR) | \
- (R_SCSI0_STATUS__resel_target__##f5_##_VAL(R_SCSI0_STATUS_, resel_target_, v5) << R_SCSI0_STATUS__resel_target__BITNR) | \
- (R_SCSI0_STATUS__resel__##f6_##_VAL(R_SCSI0_STATUS_, resel_, v6) << R_SCSI0_STATUS__resel__BITNR) | \
- (R_SCSI0_STATUS__curr_phase__##f7_##_VAL(R_SCSI0_STATUS_, curr_phase_, v7) << R_SCSI0_STATUS__curr_phase__BITNR) | \
- (R_SCSI0_STATUS__last_seq_step__##f8_##_VAL(R_SCSI0_STATUS_, last_seq_step_, v8) << R_SCSI0_STATUS__last_seq_step__BITNR) | \
- (R_SCSI0_STATUS__valid_status__##f9_##_VAL(R_SCSI0_STATUS_, valid_status_, v9) << R_SCSI0_STATUS__valid_status__BITNR) | \
- (R_SCSI0_STATUS__seq_status__##f10_##_VAL(R_SCSI0_STATUS_, seq_status_, v10) << R_SCSI0_STATUS__seq_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI0_STATUS_CTRL
- * - type: WO
- * - addr: 0xb0000043
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_STATUS_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_STATUS_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI0_STATUS_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_STATUS_CTRL(f1,v1,f2,v2,f3,v3) ( \
- *R_SCSI0_STATUS_CTRL__SADDR = ( \
- REG_INITIATED(R_SCSI0_STATUS_CTRL_) \
- REG_VAL__R_SCSI0_STATUS_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ), \
- R_SCSI0_STATUS_CTRL__WRITE(R_SCSI0_STATUS_CTRL__ADDR, *R_SCSI0_STATUS_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI0_STATUS_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI0_STATUS_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI0_STATUS_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI0_STATUS_CTRL__SHADOW(f1,v1,f2,v2,f3,v3) ( \
- *R_SCSI0_STATUS_CTRL__SADDR = ( \
- REG_INITIATED(R_SCSI0_STATUS_CTRL_) \
- REG_VAL__R_SCSI0_STATUS_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI0_STATUS_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI0_STATUS_CTRL(f1,v1,f2,v2,f3,v3) ( \
- (R_SCSI0_STATUS_CTRL__parity_in__##f1##__MASK & REG__##v1) | \
- (R_SCSI0_STATUS_CTRL__skip__##f2##__MASK & REG__##v2) | \
- (R_SCSI0_STATUS_CTRL__clr_status__##f3##__MASK & REG__##v3) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_STATUS_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_STATUS_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_STATUS_CTRL(f1,v1,f2,v2,f3,v3) ( \
- (R_SCSI0_STATUS_CTRL__parity_in__##f1##__VAL(R_SCSI0_STATUS_CTRL_, parity_in_, v1) << R_SCSI0_STATUS_CTRL__parity_in__BITNR) | \
- (R_SCSI0_STATUS_CTRL__skip__##f2##__VAL(R_SCSI0_STATUS_CTRL_, skip_, v2) << R_SCSI0_STATUS_CTRL__skip__BITNR) | \
- (R_SCSI0_STATUS_CTRL__clr_status__##f3##__VAL(R_SCSI0_STATUS_CTRL_, clr_status_, v3) << R_SCSI0_STATUS_CTRL__clr_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI0_STATUS_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI0_STATUS_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI0_STATUS_CTRL_(f1_,v1,f2_,v2,f3_,v3) ( \
- (R_SCSI0_STATUS_CTRL__parity_in__##f1_##_VAL(R_SCSI0_STATUS_CTRL_, parity_in_, v1) << R_SCSI0_STATUS_CTRL__parity_in__BITNR) | \
- (R_SCSI0_STATUS_CTRL__skip__##f2_##_VAL(R_SCSI0_STATUS_CTRL_, skip_, v2) << R_SCSI0_STATUS_CTRL__skip__BITNR) | \
- (R_SCSI0_STATUS_CTRL__clr_status__##f3_##_VAL(R_SCSI0_STATUS_CTRL_, clr_status_, v3) << R_SCSI0_STATUS_CTRL__clr_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI1_CMD
- * - type: WO
- * - addr: 0xb0000052
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_CMD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI1_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_CMD(f1,v1,f2,v2) ( \
- *R_SCSI1_CMD__SADDR = ( \
- REG_INITIATED(R_SCSI1_CMD_) \
- REG_VAL__R_SCSI1_CMD_(f1##_,v1,f2##_,v2) \
- ), \
- R_SCSI1_CMD__WRITE(R_SCSI1_CMD__ADDR, *R_SCSI1_CMD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_CMD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_CMD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI1_CMD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_CMD__SHADOW(f1,v1,f2,v2) ( \
- *R_SCSI1_CMD__SADDR = ( \
- REG_INITIATED(R_SCSI1_CMD_) \
- REG_VAL__R_SCSI1_CMD_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI1_CMD(f1,v1,f2,v2) ( \
- (R_SCSI1_CMD__asynch_setup__##f1##__MASK & REG__##v1) | \
- (R_SCSI1_CMD__command__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_CMD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_CMD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_CMD(f1,v1,f2,v2) ( \
- (R_SCSI1_CMD__asynch_setup__##f1##__VAL(R_SCSI1_CMD_, asynch_setup_, v1) << R_SCSI1_CMD__asynch_setup__BITNR) | \
- (R_SCSI1_CMD__command__##f2##__VAL(R_SCSI1_CMD_, command_, v2) << R_SCSI1_CMD__command__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_CMD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_CMD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_CMD_(f1_,v1,f2_,v2) ( \
- (R_SCSI1_CMD__asynch_setup__##f1_##_VAL(R_SCSI1_CMD_, asynch_setup_, v1) << R_SCSI1_CMD__asynch_setup__BITNR) | \
- (R_SCSI1_CMD__command__##f2_##_VAL(R_SCSI1_CMD_, command_, v2) << R_SCSI1_CMD__command__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI1_CMD_DATA
- * - type: WO
- * - addr: 0xb0000050
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_CMD_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_CMD_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI1_CMD_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_CMD_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_SCSI1_CMD_DATA__SADDR = ( \
- REG_INITIATED(R_SCSI1_CMD_DATA_) \
- REG_VAL__R_SCSI1_CMD_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ), \
- R_SCSI1_CMD_DATA__WRITE(R_SCSI1_CMD_DATA__ADDR, *R_SCSI1_CMD_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_CMD_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_CMD_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI1_CMD_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_CMD_DATA__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- *R_SCSI1_CMD_DATA__SADDR = ( \
- REG_INITIATED(R_SCSI1_CMD_DATA_) \
- REG_VAL__R_SCSI1_CMD_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI1_CMD_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI1_CMD_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_SCSI1_CMD_DATA__parity_in__##f1##__MASK & REG__##v1) | \
- (R_SCSI1_CMD_DATA__skip__##f2##__MASK & REG__##v2) | \
- (R_SCSI1_CMD_DATA__clr_status__##f3##__MASK & REG__##v3) | \
- (R_SCSI1_CMD_DATA__asynch_setup__##f4##__MASK & REG__##v4) | \
- (R_SCSI1_CMD_DATA__command__##f5##__MASK & REG__##v5) | \
- (R_SCSI1_CMD_DATA__data_out__##f6##__MASK & REG__##v6) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_CMD_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_CMD_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_CMD_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_SCSI1_CMD_DATA__parity_in__##f1##__VAL(R_SCSI1_CMD_DATA_, parity_in_, v1) << R_SCSI1_CMD_DATA__parity_in__BITNR) | \
- (R_SCSI1_CMD_DATA__skip__##f2##__VAL(R_SCSI1_CMD_DATA_, skip_, v2) << R_SCSI1_CMD_DATA__skip__BITNR) | \
- (R_SCSI1_CMD_DATA__clr_status__##f3##__VAL(R_SCSI1_CMD_DATA_, clr_status_, v3) << R_SCSI1_CMD_DATA__clr_status__BITNR) | \
- (R_SCSI1_CMD_DATA__asynch_setup__##f4##__VAL(R_SCSI1_CMD_DATA_, asynch_setup_, v4) << R_SCSI1_CMD_DATA__asynch_setup__BITNR) | \
- (R_SCSI1_CMD_DATA__command__##f5##__VAL(R_SCSI1_CMD_DATA_, command_, v5) << R_SCSI1_CMD_DATA__command__BITNR) | \
- (R_SCSI1_CMD_DATA__data_out__##f6##__VAL(R_SCSI1_CMD_DATA_, data_out_, v6) << R_SCSI1_CMD_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_CMD_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_CMD_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_CMD_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6) ( \
- (R_SCSI1_CMD_DATA__parity_in__##f1_##_VAL(R_SCSI1_CMD_DATA_, parity_in_, v1) << R_SCSI1_CMD_DATA__parity_in__BITNR) | \
- (R_SCSI1_CMD_DATA__skip__##f2_##_VAL(R_SCSI1_CMD_DATA_, skip_, v2) << R_SCSI1_CMD_DATA__skip__BITNR) | \
- (R_SCSI1_CMD_DATA__clr_status__##f3_##_VAL(R_SCSI1_CMD_DATA_, clr_status_, v3) << R_SCSI1_CMD_DATA__clr_status__BITNR) | \
- (R_SCSI1_CMD_DATA__asynch_setup__##f4_##_VAL(R_SCSI1_CMD_DATA_, asynch_setup_, v4) << R_SCSI1_CMD_DATA__asynch_setup__BITNR) | \
- (R_SCSI1_CMD_DATA__command__##f5_##_VAL(R_SCSI1_CMD_DATA_, command_, v5) << R_SCSI1_CMD_DATA__command__BITNR) | \
- (R_SCSI1_CMD_DATA__data_out__##f6_##_VAL(R_SCSI1_CMD_DATA_, data_out_, v6) << R_SCSI1_CMD_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI1_CTRL
- * - type: WO
- * - addr: 0xb0000054
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI1_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- *R_SCSI1_CTRL__SADDR = ( \
- REG_INITIATED(R_SCSI1_CTRL_) \
- REG_VAL__R_SCSI1_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11) \
- ), \
- R_SCSI1_CTRL__WRITE(R_SCSI1_CTRL__ADDR, *R_SCSI1_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI1_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- *R_SCSI1_CTRL__SADDR = ( \
- REG_INITIATED(R_SCSI1_CTRL_) \
- REG_VAL__R_SCSI1_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- (R_SCSI1_CTRL__id_type__##f1##__MASK & REG__##v1) | \
- (R_SCSI1_CTRL__sel_timeout__##f2##__MASK & REG__##v2) | \
- (R_SCSI1_CTRL__synch_per__##f3##__MASK & REG__##v3) | \
- (R_SCSI1_CTRL__rst__##f4##__MASK & REG__##v4) | \
- (R_SCSI1_CTRL__atn__##f5##__MASK & REG__##v5) | \
- (R_SCSI1_CTRL__my_id__##f6##__MASK & REG__##v6) | \
- (R_SCSI1_CTRL__target_id__##f7##__MASK & REG__##v7) | \
- (R_SCSI1_CTRL__fast_20__##f8##__MASK & REG__##v8) | \
- (R_SCSI1_CTRL__bus_width__##f9##__MASK & REG__##v9) | \
- (R_SCSI1_CTRL__synch__##f10##__MASK & REG__##v10) | \
- (R_SCSI1_CTRL__enable__##f11##__MASK & REG__##v11) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11) ( \
- (R_SCSI1_CTRL__id_type__##f1##__VAL(R_SCSI1_CTRL_, id_type_, v1) << R_SCSI1_CTRL__id_type__BITNR) | \
- (R_SCSI1_CTRL__sel_timeout__##f2##__VAL(R_SCSI1_CTRL_, sel_timeout_, v2) << R_SCSI1_CTRL__sel_timeout__BITNR) | \
- (R_SCSI1_CTRL__synch_per__##f3##__VAL(R_SCSI1_CTRL_, synch_per_, v3) << R_SCSI1_CTRL__synch_per__BITNR) | \
- (R_SCSI1_CTRL__rst__##f4##__VAL(R_SCSI1_CTRL_, rst_, v4) << R_SCSI1_CTRL__rst__BITNR) | \
- (R_SCSI1_CTRL__atn__##f5##__VAL(R_SCSI1_CTRL_, atn_, v5) << R_SCSI1_CTRL__atn__BITNR) | \
- (R_SCSI1_CTRL__my_id__##f6##__VAL(R_SCSI1_CTRL_, my_id_, v6) << R_SCSI1_CTRL__my_id__BITNR) | \
- (R_SCSI1_CTRL__target_id__##f7##__VAL(R_SCSI1_CTRL_, target_id_, v7) << R_SCSI1_CTRL__target_id__BITNR) | \
- (R_SCSI1_CTRL__fast_20__##f8##__VAL(R_SCSI1_CTRL_, fast_20_, v8) << R_SCSI1_CTRL__fast_20__BITNR) | \
- (R_SCSI1_CTRL__bus_width__##f9##__VAL(R_SCSI1_CTRL_, bus_width_, v9) << R_SCSI1_CTRL__bus_width__BITNR) | \
- (R_SCSI1_CTRL__synch__##f10##__VAL(R_SCSI1_CTRL_, synch_, v10) << R_SCSI1_CTRL__synch__BITNR) | \
- (R_SCSI1_CTRL__enable__##f11##__VAL(R_SCSI1_CTRL_, enable_, v11) << R_SCSI1_CTRL__enable__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11) ( \
- (R_SCSI1_CTRL__id_type__##f1_##_VAL(R_SCSI1_CTRL_, id_type_, v1) << R_SCSI1_CTRL__id_type__BITNR) | \
- (R_SCSI1_CTRL__sel_timeout__##f2_##_VAL(R_SCSI1_CTRL_, sel_timeout_, v2) << R_SCSI1_CTRL__sel_timeout__BITNR) | \
- (R_SCSI1_CTRL__synch_per__##f3_##_VAL(R_SCSI1_CTRL_, synch_per_, v3) << R_SCSI1_CTRL__synch_per__BITNR) | \
- (R_SCSI1_CTRL__rst__##f4_##_VAL(R_SCSI1_CTRL_, rst_, v4) << R_SCSI1_CTRL__rst__BITNR) | \
- (R_SCSI1_CTRL__atn__##f5_##_VAL(R_SCSI1_CTRL_, atn_, v5) << R_SCSI1_CTRL__atn__BITNR) | \
- (R_SCSI1_CTRL__my_id__##f6_##_VAL(R_SCSI1_CTRL_, my_id_, v6) << R_SCSI1_CTRL__my_id__BITNR) | \
- (R_SCSI1_CTRL__target_id__##f7_##_VAL(R_SCSI1_CTRL_, target_id_, v7) << R_SCSI1_CTRL__target_id__BITNR) | \
- (R_SCSI1_CTRL__fast_20__##f8_##_VAL(R_SCSI1_CTRL_, fast_20_, v8) << R_SCSI1_CTRL__fast_20__BITNR) | \
- (R_SCSI1_CTRL__bus_width__##f9_##_VAL(R_SCSI1_CTRL_, bus_width_, v9) << R_SCSI1_CTRL__bus_width__BITNR) | \
- (R_SCSI1_CTRL__synch__##f10_##_VAL(R_SCSI1_CTRL_, synch_, v10) << R_SCSI1_CTRL__synch__BITNR) | \
- (R_SCSI1_CTRL__enable__##f11_##_VAL(R_SCSI1_CTRL_, enable_, v11) << R_SCSI1_CTRL__enable__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI1_DATA
- * - type: WO
- * - addr: 0xb0000050
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI1_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_DATA(f1,v1) ( \
- *R_SCSI1_DATA__SADDR = ( \
- REG_INITIATED(R_SCSI1_DATA_) \
- REG_VAL__R_SCSI1_DATA_(f1##_,v1) \
- ), \
- R_SCSI1_DATA__WRITE(R_SCSI1_DATA__ADDR, *R_SCSI1_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI1_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_DATA__SHADOW(f1,v1) ( \
- *R_SCSI1_DATA__SADDR = ( \
- REG_INITIATED(R_SCSI1_DATA_) \
- REG_VAL__R_SCSI1_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI1_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI1_DATA(f1,v1) ( \
- (R_SCSI1_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_DATA(f1,v1) ( \
- (R_SCSI1_DATA__data_out__##f1##__VAL(R_SCSI1_DATA_, data_out_, v1) << R_SCSI1_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_DATA_(f1_,v1) ( \
- (R_SCSI1_DATA__data_out__##f1_##_VAL(R_SCSI1_DATA_, data_out_, v1) << R_SCSI1_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI1_DATA_IN
- * - type: RO
- * - addr: 0xb0000050
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI1_DATA_IN
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI1_DATA_IN(f1,v1) ( \
- (R_SCSI1_DATA_IN__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_DATA_IN
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_DATA_IN.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_DATA_IN(f1,v1) ( \
- (R_SCSI1_DATA_IN__data_in__##f1##__VAL(R_SCSI1_DATA_IN_, data_in_, v1) << R_SCSI1_DATA_IN__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_DATA_IN_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_DATA_IN.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_DATA_IN_(f1_,v1) ( \
- (R_SCSI1_DATA_IN__data_in__##f1_##_VAL(R_SCSI1_DATA_IN_, data_in_, v1) << R_SCSI1_DATA_IN__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI1_STATUS
- * - type: RO
- * - addr: 0xb0000058
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI1_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_SCSI1_STATUS__tst_arb_won__##f1##__MASK & REG__##v1) | \
- (R_SCSI1_STATUS__tst_resel__##f2##__MASK & REG__##v2) | \
- (R_SCSI1_STATUS__parity_error__##f3##__MASK & REG__##v3) | \
- (R_SCSI1_STATUS__bus_reset__##f4##__MASK & REG__##v4) | \
- (R_SCSI1_STATUS__resel_target__##f5##__MASK & REG__##v5) | \
- (R_SCSI1_STATUS__resel__##f6##__MASK & REG__##v6) | \
- (R_SCSI1_STATUS__curr_phase__##f7##__MASK & REG__##v7) | \
- (R_SCSI1_STATUS__last_seq_step__##f8##__MASK & REG__##v8) | \
- (R_SCSI1_STATUS__valid_status__##f9##__MASK & REG__##v9) | \
- (R_SCSI1_STATUS__seq_status__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_SCSI1_STATUS__tst_arb_won__##f1##__VAL(R_SCSI1_STATUS_, tst_arb_won_, v1) << R_SCSI1_STATUS__tst_arb_won__BITNR) | \
- (R_SCSI1_STATUS__tst_resel__##f2##__VAL(R_SCSI1_STATUS_, tst_resel_, v2) << R_SCSI1_STATUS__tst_resel__BITNR) | \
- (R_SCSI1_STATUS__parity_error__##f3##__VAL(R_SCSI1_STATUS_, parity_error_, v3) << R_SCSI1_STATUS__parity_error__BITNR) | \
- (R_SCSI1_STATUS__bus_reset__##f4##__VAL(R_SCSI1_STATUS_, bus_reset_, v4) << R_SCSI1_STATUS__bus_reset__BITNR) | \
- (R_SCSI1_STATUS__resel_target__##f5##__VAL(R_SCSI1_STATUS_, resel_target_, v5) << R_SCSI1_STATUS__resel_target__BITNR) | \
- (R_SCSI1_STATUS__resel__##f6##__VAL(R_SCSI1_STATUS_, resel_, v6) << R_SCSI1_STATUS__resel__BITNR) | \
- (R_SCSI1_STATUS__curr_phase__##f7##__VAL(R_SCSI1_STATUS_, curr_phase_, v7) << R_SCSI1_STATUS__curr_phase__BITNR) | \
- (R_SCSI1_STATUS__last_seq_step__##f8##__VAL(R_SCSI1_STATUS_, last_seq_step_, v8) << R_SCSI1_STATUS__last_seq_step__BITNR) | \
- (R_SCSI1_STATUS__valid_status__##f9##__VAL(R_SCSI1_STATUS_, valid_status_, v9) << R_SCSI1_STATUS__valid_status__BITNR) | \
- (R_SCSI1_STATUS__seq_status__##f10##__VAL(R_SCSI1_STATUS_, seq_status_, v10) << R_SCSI1_STATUS__seq_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_SCSI1_STATUS__tst_arb_won__##f1_##_VAL(R_SCSI1_STATUS_, tst_arb_won_, v1) << R_SCSI1_STATUS__tst_arb_won__BITNR) | \
- (R_SCSI1_STATUS__tst_resel__##f2_##_VAL(R_SCSI1_STATUS_, tst_resel_, v2) << R_SCSI1_STATUS__tst_resel__BITNR) | \
- (R_SCSI1_STATUS__parity_error__##f3_##_VAL(R_SCSI1_STATUS_, parity_error_, v3) << R_SCSI1_STATUS__parity_error__BITNR) | \
- (R_SCSI1_STATUS__bus_reset__##f4_##_VAL(R_SCSI1_STATUS_, bus_reset_, v4) << R_SCSI1_STATUS__bus_reset__BITNR) | \
- (R_SCSI1_STATUS__resel_target__##f5_##_VAL(R_SCSI1_STATUS_, resel_target_, v5) << R_SCSI1_STATUS__resel_target__BITNR) | \
- (R_SCSI1_STATUS__resel__##f6_##_VAL(R_SCSI1_STATUS_, resel_, v6) << R_SCSI1_STATUS__resel__BITNR) | \
- (R_SCSI1_STATUS__curr_phase__##f7_##_VAL(R_SCSI1_STATUS_, curr_phase_, v7) << R_SCSI1_STATUS__curr_phase__BITNR) | \
- (R_SCSI1_STATUS__last_seq_step__##f8_##_VAL(R_SCSI1_STATUS_, last_seq_step_, v8) << R_SCSI1_STATUS__last_seq_step__BITNR) | \
- (R_SCSI1_STATUS__valid_status__##f9_##_VAL(R_SCSI1_STATUS_, valid_status_, v9) << R_SCSI1_STATUS__valid_status__BITNR) | \
- (R_SCSI1_STATUS__seq_status__##f10_##_VAL(R_SCSI1_STATUS_, seq_status_, v10) << R_SCSI1_STATUS__seq_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_SCSI1_STATUS_CTRL
- * - type: WO
- * - addr: 0xb0000053
- * - group: SCSI registers
- */
-
-#if USE_GROUP__SCSI_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_STATUS_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_STATUS_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SCSI1_STATUS_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_STATUS_CTRL(f1,v1,f2,v2,f3,v3) ( \
- *R_SCSI1_STATUS_CTRL__SADDR = ( \
- REG_INITIATED(R_SCSI1_STATUS_CTRL_) \
- REG_VAL__R_SCSI1_STATUS_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ), \
- R_SCSI1_STATUS_CTRL__WRITE(R_SCSI1_STATUS_CTRL__ADDR, *R_SCSI1_STATUS_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SCSI1_STATUS_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SCSI1_STATUS_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SCSI1_STATUS_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SCSI1_STATUS_CTRL__SHADOW(f1,v1,f2,v2,f3,v3) ( \
- *R_SCSI1_STATUS_CTRL__SADDR = ( \
- REG_INITIATED(R_SCSI1_STATUS_CTRL_) \
- REG_VAL__R_SCSI1_STATUS_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SCSI1_STATUS_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SCSI1_STATUS_CTRL(f1,v1,f2,v2,f3,v3) ( \
- (R_SCSI1_STATUS_CTRL__parity_in__##f1##__MASK & REG__##v1) | \
- (R_SCSI1_STATUS_CTRL__skip__##f2##__MASK & REG__##v2) | \
- (R_SCSI1_STATUS_CTRL__clr_status__##f3##__MASK & REG__##v3) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_STATUS_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_STATUS_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_STATUS_CTRL(f1,v1,f2,v2,f3,v3) ( \
- (R_SCSI1_STATUS_CTRL__parity_in__##f1##__VAL(R_SCSI1_STATUS_CTRL_, parity_in_, v1) << R_SCSI1_STATUS_CTRL__parity_in__BITNR) | \
- (R_SCSI1_STATUS_CTRL__skip__##f2##__VAL(R_SCSI1_STATUS_CTRL_, skip_, v2) << R_SCSI1_STATUS_CTRL__skip__BITNR) | \
- (R_SCSI1_STATUS_CTRL__clr_status__##f3##__VAL(R_SCSI1_STATUS_CTRL_, clr_status_, v3) << R_SCSI1_STATUS_CTRL__clr_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SCSI1_STATUS_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SCSI1_STATUS_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SCSI1_STATUS_CTRL_(f1_,v1,f2_,v2,f3_,v3) ( \
- (R_SCSI1_STATUS_CTRL__parity_in__##f1_##_VAL(R_SCSI1_STATUS_CTRL_, parity_in_, v1) << R_SCSI1_STATUS_CTRL__parity_in__BITNR) | \
- (R_SCSI1_STATUS_CTRL__skip__##f2_##_VAL(R_SCSI1_STATUS_CTRL_, skip_, v2) << R_SCSI1_STATUS_CTRL__skip__BITNR) | \
- (R_SCSI1_STATUS_CTRL__clr_status__##f3_##_VAL(R_SCSI1_STATUS_CTRL_, clr_status_, v3) << R_SCSI1_STATUS_CTRL__clr_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_SDRAM_CONFIG
- * - type: WO
- * - addr: 0xb000000c
- * - group: Bus interface configuration registers
- */
-
-#if USE_GROUP__Bus_interface_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SDRAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SDRAM_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SDRAM_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SDRAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- *R_SDRAM_CONFIG__SADDR = ( \
- REG_INITIATED(R_SDRAM_CONFIG_) \
- REG_VAL__R_SDRAM_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) \
- ), \
- R_SDRAM_CONFIG__WRITE(R_SDRAM_CONFIG__ADDR, *R_SDRAM_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SDRAM_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SDRAM_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SDRAM_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SDRAM_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- *R_SDRAM_CONFIG__SADDR = ( \
- REG_INITIATED(R_SDRAM_CONFIG_) \
- REG_VAL__R_SDRAM_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SDRAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SDRAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_SDRAM_CONFIG__wmm1__##f1##__MASK & REG__##v1) | \
- (R_SDRAM_CONFIG__wmm0__##f2##__MASK & REG__##v2) | \
- (R_SDRAM_CONFIG__sh1__##f3##__MASK & REG__##v3) | \
- (R_SDRAM_CONFIG__sh0__##f4##__MASK & REG__##v4) | \
- (R_SDRAM_CONFIG__w__##f5##__MASK & REG__##v5) | \
- (R_SDRAM_CONFIG__type1__##f6##__MASK & REG__##v6) | \
- (R_SDRAM_CONFIG__type0__##f7##__MASK & REG__##v7) | \
- (R_SDRAM_CONFIG__group_sel__##f8##__MASK & REG__##v8) | \
- (R_SDRAM_CONFIG__ca1__##f9##__MASK & REG__##v9) | \
- (R_SDRAM_CONFIG__bank_sel1__##f10##__MASK & REG__##v10) | \
- (R_SDRAM_CONFIG__ca0__##f11##__MASK & REG__##v11) | \
- (R_SDRAM_CONFIG__bank_sel0__##f12##__MASK & REG__##v12) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SDRAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SDRAM_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SDRAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_SDRAM_CONFIG__wmm1__##f1##__VAL(R_SDRAM_CONFIG_, wmm1_, v1) << R_SDRAM_CONFIG__wmm1__BITNR) | \
- (R_SDRAM_CONFIG__wmm0__##f2##__VAL(R_SDRAM_CONFIG_, wmm0_, v2) << R_SDRAM_CONFIG__wmm0__BITNR) | \
- (R_SDRAM_CONFIG__sh1__##f3##__VAL(R_SDRAM_CONFIG_, sh1_, v3) << R_SDRAM_CONFIG__sh1__BITNR) | \
- (R_SDRAM_CONFIG__sh0__##f4##__VAL(R_SDRAM_CONFIG_, sh0_, v4) << R_SDRAM_CONFIG__sh0__BITNR) | \
- (R_SDRAM_CONFIG__w__##f5##__VAL(R_SDRAM_CONFIG_, w_, v5) << R_SDRAM_CONFIG__w__BITNR) | \
- (R_SDRAM_CONFIG__type1__##f6##__VAL(R_SDRAM_CONFIG_, type1_, v6) << R_SDRAM_CONFIG__type1__BITNR) | \
- (R_SDRAM_CONFIG__type0__##f7##__VAL(R_SDRAM_CONFIG_, type0_, v7) << R_SDRAM_CONFIG__type0__BITNR) | \
- (R_SDRAM_CONFIG__group_sel__##f8##__VAL(R_SDRAM_CONFIG_, group_sel_, v8) << R_SDRAM_CONFIG__group_sel__BITNR) | \
- (R_SDRAM_CONFIG__ca1__##f9##__VAL(R_SDRAM_CONFIG_, ca1_, v9) << R_SDRAM_CONFIG__ca1__BITNR) | \
- (R_SDRAM_CONFIG__bank_sel1__##f10##__VAL(R_SDRAM_CONFIG_, bank_sel1_, v10) << R_SDRAM_CONFIG__bank_sel1__BITNR) | \
- (R_SDRAM_CONFIG__ca0__##f11##__VAL(R_SDRAM_CONFIG_, ca0_, v11) << R_SDRAM_CONFIG__ca0__BITNR) | \
- (R_SDRAM_CONFIG__bank_sel0__##f12##__VAL(R_SDRAM_CONFIG_, bank_sel0_, v12) << R_SDRAM_CONFIG__bank_sel0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SDRAM_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SDRAM_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SDRAM_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12) ( \
- (R_SDRAM_CONFIG__wmm1__##f1_##_VAL(R_SDRAM_CONFIG_, wmm1_, v1) << R_SDRAM_CONFIG__wmm1__BITNR) | \
- (R_SDRAM_CONFIG__wmm0__##f2_##_VAL(R_SDRAM_CONFIG_, wmm0_, v2) << R_SDRAM_CONFIG__wmm0__BITNR) | \
- (R_SDRAM_CONFIG__sh1__##f3_##_VAL(R_SDRAM_CONFIG_, sh1_, v3) << R_SDRAM_CONFIG__sh1__BITNR) | \
- (R_SDRAM_CONFIG__sh0__##f4_##_VAL(R_SDRAM_CONFIG_, sh0_, v4) << R_SDRAM_CONFIG__sh0__BITNR) | \
- (R_SDRAM_CONFIG__w__##f5_##_VAL(R_SDRAM_CONFIG_, w_, v5) << R_SDRAM_CONFIG__w__BITNR) | \
- (R_SDRAM_CONFIG__type1__##f6_##_VAL(R_SDRAM_CONFIG_, type1_, v6) << R_SDRAM_CONFIG__type1__BITNR) | \
- (R_SDRAM_CONFIG__type0__##f7_##_VAL(R_SDRAM_CONFIG_, type0_, v7) << R_SDRAM_CONFIG__type0__BITNR) | \
- (R_SDRAM_CONFIG__group_sel__##f8_##_VAL(R_SDRAM_CONFIG_, group_sel_, v8) << R_SDRAM_CONFIG__group_sel__BITNR) | \
- (R_SDRAM_CONFIG__ca1__##f9_##_VAL(R_SDRAM_CONFIG_, ca1_, v9) << R_SDRAM_CONFIG__ca1__BITNR) | \
- (R_SDRAM_CONFIG__bank_sel1__##f10_##_VAL(R_SDRAM_CONFIG_, bank_sel1_, v10) << R_SDRAM_CONFIG__bank_sel1__BITNR) | \
- (R_SDRAM_CONFIG__ca0__##f11_##_VAL(R_SDRAM_CONFIG_, ca0_, v11) << R_SDRAM_CONFIG__ca0__BITNR) | \
- (R_SDRAM_CONFIG__bank_sel0__##f12_##_VAL(R_SDRAM_CONFIG_, bank_sel0_, v12) << R_SDRAM_CONFIG__bank_sel0__BITNR) \
-)
-
-#endif
-
-/*
- * R_SDRAM_TIMING
- * - type: WO
- * - addr: 0xb0000008
- * - group: Bus interface configuration registers
- */
-
-#if USE_GROUP__Bus_interface_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SDRAM_TIMING
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SDRAM_TIMING.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SDRAM_TIMING.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SDRAM_TIMING(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- *R_SDRAM_TIMING__SADDR = ( \
- REG_INITIATED(R_SDRAM_TIMING_) \
- REG_VAL__R_SDRAM_TIMING_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) \
- ), \
- R_SDRAM_TIMING__WRITE(R_SDRAM_TIMING__ADDR, *R_SDRAM_TIMING__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SDRAM_TIMING__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SDRAM_TIMING.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SDRAM_TIMING.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SDRAM_TIMING__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- *R_SDRAM_TIMING__SADDR = ( \
- REG_INITIATED(R_SDRAM_TIMING_) \
- REG_VAL__R_SDRAM_TIMING_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SDRAM_TIMING
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SDRAM_TIMING(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_SDRAM_TIMING__sdram__##f1##__MASK & REG__##v1) | \
- (R_SDRAM_TIMING__mrs_data__##f2##__MASK & REG__##v2) | \
- (R_SDRAM_TIMING__ref__##f3##__MASK & REG__##v3) | \
- (R_SDRAM_TIMING__ddr__##f4##__MASK & REG__##v4) | \
- (R_SDRAM_TIMING__clk100__##f5##__MASK & REG__##v5) | \
- (R_SDRAM_TIMING__ps__##f6##__MASK & REG__##v6) | \
- (R_SDRAM_TIMING__cmd__##f7##__MASK & REG__##v7) | \
- (R_SDRAM_TIMING__pde__##f8##__MASK & REG__##v8) | \
- (R_SDRAM_TIMING__rc__##f9##__MASK & REG__##v9) | \
- (R_SDRAM_TIMING__rp__##f10##__MASK & REG__##v10) | \
- (R_SDRAM_TIMING__rcd__##f11##__MASK & REG__##v11) | \
- (R_SDRAM_TIMING__cl__##f12##__MASK & REG__##v12) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SDRAM_TIMING
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SDRAM_TIMING.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SDRAM_TIMING(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_SDRAM_TIMING__sdram__##f1##__VAL(R_SDRAM_TIMING_, sdram_, v1) << R_SDRAM_TIMING__sdram__BITNR) | \
- (R_SDRAM_TIMING__mrs_data__##f2##__VAL(R_SDRAM_TIMING_, mrs_data_, v2) << R_SDRAM_TIMING__mrs_data__BITNR) | \
- (R_SDRAM_TIMING__ref__##f3##__VAL(R_SDRAM_TIMING_, ref_, v3) << R_SDRAM_TIMING__ref__BITNR) | \
- (R_SDRAM_TIMING__ddr__##f4##__VAL(R_SDRAM_TIMING_, ddr_, v4) << R_SDRAM_TIMING__ddr__BITNR) | \
- (R_SDRAM_TIMING__clk100__##f5##__VAL(R_SDRAM_TIMING_, clk100_, v5) << R_SDRAM_TIMING__clk100__BITNR) | \
- (R_SDRAM_TIMING__ps__##f6##__VAL(R_SDRAM_TIMING_, ps_, v6) << R_SDRAM_TIMING__ps__BITNR) | \
- (R_SDRAM_TIMING__cmd__##f7##__VAL(R_SDRAM_TIMING_, cmd_, v7) << R_SDRAM_TIMING__cmd__BITNR) | \
- (R_SDRAM_TIMING__pde__##f8##__VAL(R_SDRAM_TIMING_, pde_, v8) << R_SDRAM_TIMING__pde__BITNR) | \
- (R_SDRAM_TIMING__rc__##f9##__VAL(R_SDRAM_TIMING_, rc_, v9) << R_SDRAM_TIMING__rc__BITNR) | \
- (R_SDRAM_TIMING__rp__##f10##__VAL(R_SDRAM_TIMING_, rp_, v10) << R_SDRAM_TIMING__rp__BITNR) | \
- (R_SDRAM_TIMING__rcd__##f11##__VAL(R_SDRAM_TIMING_, rcd_, v11) << R_SDRAM_TIMING__rcd__BITNR) | \
- (R_SDRAM_TIMING__cl__##f12##__VAL(R_SDRAM_TIMING_, cl_, v12) << R_SDRAM_TIMING__cl__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SDRAM_TIMING_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SDRAM_TIMING.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SDRAM_TIMING_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12) ( \
- (R_SDRAM_TIMING__sdram__##f1_##_VAL(R_SDRAM_TIMING_, sdram_, v1) << R_SDRAM_TIMING__sdram__BITNR) | \
- (R_SDRAM_TIMING__mrs_data__##f2_##_VAL(R_SDRAM_TIMING_, mrs_data_, v2) << R_SDRAM_TIMING__mrs_data__BITNR) | \
- (R_SDRAM_TIMING__ref__##f3_##_VAL(R_SDRAM_TIMING_, ref_, v3) << R_SDRAM_TIMING__ref__BITNR) | \
- (R_SDRAM_TIMING__ddr__##f4_##_VAL(R_SDRAM_TIMING_, ddr_, v4) << R_SDRAM_TIMING__ddr__BITNR) | \
- (R_SDRAM_TIMING__clk100__##f5_##_VAL(R_SDRAM_TIMING_, clk100_, v5) << R_SDRAM_TIMING__clk100__BITNR) | \
- (R_SDRAM_TIMING__ps__##f6_##_VAL(R_SDRAM_TIMING_, ps_, v6) << R_SDRAM_TIMING__ps__BITNR) | \
- (R_SDRAM_TIMING__cmd__##f7_##_VAL(R_SDRAM_TIMING_, cmd_, v7) << R_SDRAM_TIMING__cmd__BITNR) | \
- (R_SDRAM_TIMING__pde__##f8_##_VAL(R_SDRAM_TIMING_, pde_, v8) << R_SDRAM_TIMING__pde__BITNR) | \
- (R_SDRAM_TIMING__rc__##f9_##_VAL(R_SDRAM_TIMING_, rc_, v9) << R_SDRAM_TIMING__rc__BITNR) | \
- (R_SDRAM_TIMING__rp__##f10_##_VAL(R_SDRAM_TIMING_, rp_, v10) << R_SDRAM_TIMING__rp__BITNR) | \
- (R_SDRAM_TIMING__rcd__##f11_##_VAL(R_SDRAM_TIMING_, rcd_, v11) << R_SDRAM_TIMING__rcd__BITNR) | \
- (R_SDRAM_TIMING__cl__##f12_##_VAL(R_SDRAM_TIMING_, cl_, v12) << R_SDRAM_TIMING__cl__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_BAUD
- * - type: WO
- * - addr: 0xb0000063
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_BAUD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL0_BAUD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_BAUD(f1,v1,f2,v2) ( \
- *R_SERIAL0_BAUD__SADDR = ( \
- REG_INITIATED(R_SERIAL0_BAUD_) \
- REG_VAL__R_SERIAL0_BAUD_(f1##_,v1,f2##_,v2) \
- ), \
- R_SERIAL0_BAUD__WRITE(R_SERIAL0_BAUD__ADDR, *R_SERIAL0_BAUD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_BAUD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_BAUD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL0_BAUD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_BAUD__SHADOW(f1,v1,f2,v2) ( \
- *R_SERIAL0_BAUD__SADDR = ( \
- REG_INITIATED(R_SERIAL0_BAUD_) \
- REG_VAL__R_SERIAL0_BAUD_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_BAUD(f1,v1,f2,v2) ( \
- (R_SERIAL0_BAUD__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SERIAL0_BAUD__rec_baud__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_BAUD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_BAUD(f1,v1,f2,v2) ( \
- (R_SERIAL0_BAUD__tr_baud__##f1##__VAL(R_SERIAL0_BAUD_, tr_baud_, v1) << R_SERIAL0_BAUD__tr_baud__BITNR) | \
- (R_SERIAL0_BAUD__rec_baud__##f2##__VAL(R_SERIAL0_BAUD_, rec_baud_, v2) << R_SERIAL0_BAUD__rec_baud__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_BAUD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_BAUD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_BAUD_(f1_,v1,f2_,v2) ( \
- (R_SERIAL0_BAUD__tr_baud__##f1_##_VAL(R_SERIAL0_BAUD_, tr_baud_, v1) << R_SERIAL0_BAUD__tr_baud__BITNR) | \
- (R_SERIAL0_BAUD__rec_baud__##f2_##_VAL(R_SERIAL0_BAUD_, rec_baud_, v2) << R_SERIAL0_BAUD__rec_baud__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_CTRL
- * - type: WO
- * - addr: 0xb0000060
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL0_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_SERIAL0_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL0_CTRL_) \
- REG_VAL__R_SERIAL0_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ), \
- R_SERIAL0_CTRL__WRITE(R_SERIAL0_CTRL__ADDR, *R_SERIAL0_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL0_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_SERIAL0_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL0_CTRL_) \
- REG_VAL__R_SERIAL0_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_SERIAL0_CTRL__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SERIAL0_CTRL__rec_baud__##f2##__MASK & REG__##v2) | \
- (R_SERIAL0_CTRL__dma_err__##f3##__MASK & REG__##v3) | \
- (R_SERIAL0_CTRL__rec_enable__##f4##__MASK & REG__##v4) | \
- (R_SERIAL0_CTRL__rts___##f5##__MASK & REG__##v5) | \
- (R_SERIAL0_CTRL__sampling__##f6##__MASK & REG__##v6) | \
- (R_SERIAL0_CTRL__rec_stick_par__##f7##__MASK & REG__##v7) | \
- (R_SERIAL0_CTRL__rec_par__##f8##__MASK & REG__##v8) | \
- (R_SERIAL0_CTRL__rec_par_en__##f9##__MASK & REG__##v9) | \
- (R_SERIAL0_CTRL__rec_bitnr__##f10##__MASK & REG__##v10) | \
- (R_SERIAL0_CTRL__txd__##f11##__MASK & REG__##v11) | \
- (R_SERIAL0_CTRL__tr_enable__##f12##__MASK & REG__##v12) | \
- (R_SERIAL0_CTRL__auto_cts__##f13##__MASK & REG__##v13) | \
- (R_SERIAL0_CTRL__stop_bits__##f14##__MASK & REG__##v14) | \
- (R_SERIAL0_CTRL__tr_stick_par__##f15##__MASK & REG__##v15) | \
- (R_SERIAL0_CTRL__tr_par__##f16##__MASK & REG__##v16) | \
- (R_SERIAL0_CTRL__tr_par_en__##f17##__MASK & REG__##v17) | \
- (R_SERIAL0_CTRL__tr_bitnr__##f18##__MASK & REG__##v18) | \
- (R_SERIAL0_CTRL__data_out__##f19##__MASK & REG__##v19) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_SERIAL0_CTRL__tr_baud__##f1##__VAL(R_SERIAL0_CTRL_, tr_baud_, v1) << R_SERIAL0_CTRL__tr_baud__BITNR) | \
- (R_SERIAL0_CTRL__rec_baud__##f2##__VAL(R_SERIAL0_CTRL_, rec_baud_, v2) << R_SERIAL0_CTRL__rec_baud__BITNR) | \
- (R_SERIAL0_CTRL__dma_err__##f3##__VAL(R_SERIAL0_CTRL_, dma_err_, v3) << R_SERIAL0_CTRL__dma_err__BITNR) | \
- (R_SERIAL0_CTRL__rec_enable__##f4##__VAL(R_SERIAL0_CTRL_, rec_enable_, v4) << R_SERIAL0_CTRL__rec_enable__BITNR) | \
- (R_SERIAL0_CTRL__rts___##f5##__VAL(R_SERIAL0_CTRL_, rts__, v5) << R_SERIAL0_CTRL__rts___BITNR) | \
- (R_SERIAL0_CTRL__sampling__##f6##__VAL(R_SERIAL0_CTRL_, sampling_, v6) << R_SERIAL0_CTRL__sampling__BITNR) | \
- (R_SERIAL0_CTRL__rec_stick_par__##f7##__VAL(R_SERIAL0_CTRL_, rec_stick_par_, v7) << R_SERIAL0_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL0_CTRL__rec_par__##f8##__VAL(R_SERIAL0_CTRL_, rec_par_, v8) << R_SERIAL0_CTRL__rec_par__BITNR) | \
- (R_SERIAL0_CTRL__rec_par_en__##f9##__VAL(R_SERIAL0_CTRL_, rec_par_en_, v9) << R_SERIAL0_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL0_CTRL__rec_bitnr__##f10##__VAL(R_SERIAL0_CTRL_, rec_bitnr_, v10) << R_SERIAL0_CTRL__rec_bitnr__BITNR) | \
- (R_SERIAL0_CTRL__txd__##f11##__VAL(R_SERIAL0_CTRL_, txd_, v11) << R_SERIAL0_CTRL__txd__BITNR) | \
- (R_SERIAL0_CTRL__tr_enable__##f12##__VAL(R_SERIAL0_CTRL_, tr_enable_, v12) << R_SERIAL0_CTRL__tr_enable__BITNR) | \
- (R_SERIAL0_CTRL__auto_cts__##f13##__VAL(R_SERIAL0_CTRL_, auto_cts_, v13) << R_SERIAL0_CTRL__auto_cts__BITNR) | \
- (R_SERIAL0_CTRL__stop_bits__##f14##__VAL(R_SERIAL0_CTRL_, stop_bits_, v14) << R_SERIAL0_CTRL__stop_bits__BITNR) | \
- (R_SERIAL0_CTRL__tr_stick_par__##f15##__VAL(R_SERIAL0_CTRL_, tr_stick_par_, v15) << R_SERIAL0_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL0_CTRL__tr_par__##f16##__VAL(R_SERIAL0_CTRL_, tr_par_, v16) << R_SERIAL0_CTRL__tr_par__BITNR) | \
- (R_SERIAL0_CTRL__tr_par_en__##f17##__VAL(R_SERIAL0_CTRL_, tr_par_en_, v17) << R_SERIAL0_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL0_CTRL__tr_bitnr__##f18##__VAL(R_SERIAL0_CTRL_, tr_bitnr_, v18) << R_SERIAL0_CTRL__tr_bitnr__BITNR) | \
- (R_SERIAL0_CTRL__data_out__##f19##__VAL(R_SERIAL0_CTRL_, data_out_, v19) << R_SERIAL0_CTRL__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19) ( \
- (R_SERIAL0_CTRL__tr_baud__##f1_##_VAL(R_SERIAL0_CTRL_, tr_baud_, v1) << R_SERIAL0_CTRL__tr_baud__BITNR) | \
- (R_SERIAL0_CTRL__rec_baud__##f2_##_VAL(R_SERIAL0_CTRL_, rec_baud_, v2) << R_SERIAL0_CTRL__rec_baud__BITNR) | \
- (R_SERIAL0_CTRL__dma_err__##f3_##_VAL(R_SERIAL0_CTRL_, dma_err_, v3) << R_SERIAL0_CTRL__dma_err__BITNR) | \
- (R_SERIAL0_CTRL__rec_enable__##f4_##_VAL(R_SERIAL0_CTRL_, rec_enable_, v4) << R_SERIAL0_CTRL__rec_enable__BITNR) | \
- (R_SERIAL0_CTRL__rts___##f5_##_VAL(R_SERIAL0_CTRL_, rts__, v5) << R_SERIAL0_CTRL__rts___BITNR) | \
- (R_SERIAL0_CTRL__sampling__##f6_##_VAL(R_SERIAL0_CTRL_, sampling_, v6) << R_SERIAL0_CTRL__sampling__BITNR) | \
- (R_SERIAL0_CTRL__rec_stick_par__##f7_##_VAL(R_SERIAL0_CTRL_, rec_stick_par_, v7) << R_SERIAL0_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL0_CTRL__rec_par__##f8_##_VAL(R_SERIAL0_CTRL_, rec_par_, v8) << R_SERIAL0_CTRL__rec_par__BITNR) | \
- (R_SERIAL0_CTRL__rec_par_en__##f9_##_VAL(R_SERIAL0_CTRL_, rec_par_en_, v9) << R_SERIAL0_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL0_CTRL__rec_bitnr__##f10_##_VAL(R_SERIAL0_CTRL_, rec_bitnr_, v10) << R_SERIAL0_CTRL__rec_bitnr__BITNR) | \
- (R_SERIAL0_CTRL__txd__##f11_##_VAL(R_SERIAL0_CTRL_, txd_, v11) << R_SERIAL0_CTRL__txd__BITNR) | \
- (R_SERIAL0_CTRL__tr_enable__##f12_##_VAL(R_SERIAL0_CTRL_, tr_enable_, v12) << R_SERIAL0_CTRL__tr_enable__BITNR) | \
- (R_SERIAL0_CTRL__auto_cts__##f13_##_VAL(R_SERIAL0_CTRL_, auto_cts_, v13) << R_SERIAL0_CTRL__auto_cts__BITNR) | \
- (R_SERIAL0_CTRL__stop_bits__##f14_##_VAL(R_SERIAL0_CTRL_, stop_bits_, v14) << R_SERIAL0_CTRL__stop_bits__BITNR) | \
- (R_SERIAL0_CTRL__tr_stick_par__##f15_##_VAL(R_SERIAL0_CTRL_, tr_stick_par_, v15) << R_SERIAL0_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL0_CTRL__tr_par__##f16_##_VAL(R_SERIAL0_CTRL_, tr_par_, v16) << R_SERIAL0_CTRL__tr_par__BITNR) | \
- (R_SERIAL0_CTRL__tr_par_en__##f17_##_VAL(R_SERIAL0_CTRL_, tr_par_en_, v17) << R_SERIAL0_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL0_CTRL__tr_bitnr__##f18_##_VAL(R_SERIAL0_CTRL_, tr_bitnr_, v18) << R_SERIAL0_CTRL__tr_bitnr__BITNR) | \
- (R_SERIAL0_CTRL__data_out__##f19_##_VAL(R_SERIAL0_CTRL_, data_out_, v19) << R_SERIAL0_CTRL__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_READ
- * - type: RO
- * - addr: 0xb0000060
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SERIAL0_READ__xoff_detect__##f1##__MASK & REG__##v1) | \
- (R_SERIAL0_READ__cts___##f2##__MASK & REG__##v2) | \
- (R_SERIAL0_READ__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SERIAL0_READ__rxd__##f4##__MASK & REG__##v4) | \
- (R_SERIAL0_READ__overrun__##f5##__MASK & REG__##v5) | \
- (R_SERIAL0_READ__par_err__##f6##__MASK & REG__##v6) | \
- (R_SERIAL0_READ__framing_err__##f7##__MASK & REG__##v7) | \
- (R_SERIAL0_READ__data_avail__##f8##__MASK & REG__##v8) | \
- (R_SERIAL0_READ__data_in__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SERIAL0_READ__xoff_detect__##f1##__VAL(R_SERIAL0_READ_, xoff_detect_, v1) << R_SERIAL0_READ__xoff_detect__BITNR) | \
- (R_SERIAL0_READ__cts___##f2##__VAL(R_SERIAL0_READ_, cts__, v2) << R_SERIAL0_READ__cts___BITNR) | \
- (R_SERIAL0_READ__tr_ready__##f3##__VAL(R_SERIAL0_READ_, tr_ready_, v3) << R_SERIAL0_READ__tr_ready__BITNR) | \
- (R_SERIAL0_READ__rxd__##f4##__VAL(R_SERIAL0_READ_, rxd_, v4) << R_SERIAL0_READ__rxd__BITNR) | \
- (R_SERIAL0_READ__overrun__##f5##__VAL(R_SERIAL0_READ_, overrun_, v5) << R_SERIAL0_READ__overrun__BITNR) | \
- (R_SERIAL0_READ__par_err__##f6##__VAL(R_SERIAL0_READ_, par_err_, v6) << R_SERIAL0_READ__par_err__BITNR) | \
- (R_SERIAL0_READ__framing_err__##f7##__VAL(R_SERIAL0_READ_, framing_err_, v7) << R_SERIAL0_READ__framing_err__BITNR) | \
- (R_SERIAL0_READ__data_avail__##f8##__VAL(R_SERIAL0_READ_, data_avail_, v8) << R_SERIAL0_READ__data_avail__BITNR) | \
- (R_SERIAL0_READ__data_in__##f9##__VAL(R_SERIAL0_READ_, data_in_, v9) << R_SERIAL0_READ__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_READ_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_SERIAL0_READ__xoff_detect__##f1_##_VAL(R_SERIAL0_READ_, xoff_detect_, v1) << R_SERIAL0_READ__xoff_detect__BITNR) | \
- (R_SERIAL0_READ__cts___##f2_##_VAL(R_SERIAL0_READ_, cts__, v2) << R_SERIAL0_READ__cts___BITNR) | \
- (R_SERIAL0_READ__tr_ready__##f3_##_VAL(R_SERIAL0_READ_, tr_ready_, v3) << R_SERIAL0_READ__tr_ready__BITNR) | \
- (R_SERIAL0_READ__rxd__##f4_##_VAL(R_SERIAL0_READ_, rxd_, v4) << R_SERIAL0_READ__rxd__BITNR) | \
- (R_SERIAL0_READ__overrun__##f5_##_VAL(R_SERIAL0_READ_, overrun_, v5) << R_SERIAL0_READ__overrun__BITNR) | \
- (R_SERIAL0_READ__par_err__##f6_##_VAL(R_SERIAL0_READ_, par_err_, v6) << R_SERIAL0_READ__par_err__BITNR) | \
- (R_SERIAL0_READ__framing_err__##f7_##_VAL(R_SERIAL0_READ_, framing_err_, v7) << R_SERIAL0_READ__framing_err__BITNR) | \
- (R_SERIAL0_READ__data_avail__##f8_##_VAL(R_SERIAL0_READ_, data_avail_, v8) << R_SERIAL0_READ__data_avail__BITNR) | \
- (R_SERIAL0_READ__data_in__##f9_##_VAL(R_SERIAL0_READ_, data_in_, v9) << R_SERIAL0_READ__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_REC_CTRL
- * - type: WO
- * - addr: 0xb0000062
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_REC_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL0_REC_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL0_REC_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL0_REC_CTRL_) \
- REG_VAL__R_SERIAL0_REC_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SERIAL0_REC_CTRL__WRITE(R_SERIAL0_REC_CTRL__ADDR, *R_SERIAL0_REC_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_REC_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_REC_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL0_REC_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_REC_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL0_REC_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL0_REC_CTRL_) \
- REG_VAL__R_SERIAL0_REC_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL0_REC_CTRL__dma_err__##f1##__MASK & REG__##v1) | \
- (R_SERIAL0_REC_CTRL__rec_enable__##f2##__MASK & REG__##v2) | \
- (R_SERIAL0_REC_CTRL__rts___##f3##__MASK & REG__##v3) | \
- (R_SERIAL0_REC_CTRL__sampling__##f4##__MASK & REG__##v4) | \
- (R_SERIAL0_REC_CTRL__rec_stick_par__##f5##__MASK & REG__##v5) | \
- (R_SERIAL0_REC_CTRL__rec_par__##f6##__MASK & REG__##v6) | \
- (R_SERIAL0_REC_CTRL__rec_par_en__##f7##__MASK & REG__##v7) | \
- (R_SERIAL0_REC_CTRL__rec_bitnr__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_REC_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL0_REC_CTRL__dma_err__##f1##__VAL(R_SERIAL0_REC_CTRL_, dma_err_, v1) << R_SERIAL0_REC_CTRL__dma_err__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_enable__##f2##__VAL(R_SERIAL0_REC_CTRL_, rec_enable_, v2) << R_SERIAL0_REC_CTRL__rec_enable__BITNR) | \
- (R_SERIAL0_REC_CTRL__rts___##f3##__VAL(R_SERIAL0_REC_CTRL_, rts__, v3) << R_SERIAL0_REC_CTRL__rts___BITNR) | \
- (R_SERIAL0_REC_CTRL__sampling__##f4##__VAL(R_SERIAL0_REC_CTRL_, sampling_, v4) << R_SERIAL0_REC_CTRL__sampling__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_stick_par__##f5##__VAL(R_SERIAL0_REC_CTRL_, rec_stick_par_, v5) << R_SERIAL0_REC_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_par__##f6##__VAL(R_SERIAL0_REC_CTRL_, rec_par_, v6) << R_SERIAL0_REC_CTRL__rec_par__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_par_en__##f7##__VAL(R_SERIAL0_REC_CTRL_, rec_par_en_, v7) << R_SERIAL0_REC_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_bitnr__##f8##__VAL(R_SERIAL0_REC_CTRL_, rec_bitnr_, v8) << R_SERIAL0_REC_CTRL__rec_bitnr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_REC_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_REC_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_REC_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL0_REC_CTRL__dma_err__##f1_##_VAL(R_SERIAL0_REC_CTRL_, dma_err_, v1) << R_SERIAL0_REC_CTRL__dma_err__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_enable__##f2_##_VAL(R_SERIAL0_REC_CTRL_, rec_enable_, v2) << R_SERIAL0_REC_CTRL__rec_enable__BITNR) | \
- (R_SERIAL0_REC_CTRL__rts___##f3_##_VAL(R_SERIAL0_REC_CTRL_, rts__, v3) << R_SERIAL0_REC_CTRL__rts___BITNR) | \
- (R_SERIAL0_REC_CTRL__sampling__##f4_##_VAL(R_SERIAL0_REC_CTRL_, sampling_, v4) << R_SERIAL0_REC_CTRL__sampling__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_stick_par__##f5_##_VAL(R_SERIAL0_REC_CTRL_, rec_stick_par_, v5) << R_SERIAL0_REC_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_par__##f6_##_VAL(R_SERIAL0_REC_CTRL_, rec_par_, v6) << R_SERIAL0_REC_CTRL__rec_par__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_par_en__##f7_##_VAL(R_SERIAL0_REC_CTRL_, rec_par_en_, v7) << R_SERIAL0_REC_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL0_REC_CTRL__rec_bitnr__##f8_##_VAL(R_SERIAL0_REC_CTRL_, rec_bitnr_, v8) << R_SERIAL0_REC_CTRL__rec_bitnr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_REC_DATA
- * - type: RO
- * - addr: 0xb0000060
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_REC_DATA(f1,v1) ( \
- (R_SERIAL0_REC_DATA__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_REC_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_REC_DATA(f1,v1) ( \
- (R_SERIAL0_REC_DATA__data_in__##f1##__VAL(R_SERIAL0_REC_DATA_, data_in_, v1) << R_SERIAL0_REC_DATA__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_REC_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_REC_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_REC_DATA_(f1_,v1) ( \
- (R_SERIAL0_REC_DATA__data_in__##f1_##_VAL(R_SERIAL0_REC_DATA_, data_in_, v1) << R_SERIAL0_REC_DATA__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_STATUS
- * - type: RO
- * - addr: 0xb0000061
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL0_STATUS__xoff_detect__##f1##__MASK & REG__##v1) | \
- (R_SERIAL0_STATUS__cts___##f2##__MASK & REG__##v2) | \
- (R_SERIAL0_STATUS__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SERIAL0_STATUS__rxd__##f4##__MASK & REG__##v4) | \
- (R_SERIAL0_STATUS__overrun__##f5##__MASK & REG__##v5) | \
- (R_SERIAL0_STATUS__par_err__##f6##__MASK & REG__##v6) | \
- (R_SERIAL0_STATUS__framing_err__##f7##__MASK & REG__##v7) | \
- (R_SERIAL0_STATUS__data_avail__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL0_STATUS__xoff_detect__##f1##__VAL(R_SERIAL0_STATUS_, xoff_detect_, v1) << R_SERIAL0_STATUS__xoff_detect__BITNR) | \
- (R_SERIAL0_STATUS__cts___##f2##__VAL(R_SERIAL0_STATUS_, cts__, v2) << R_SERIAL0_STATUS__cts___BITNR) | \
- (R_SERIAL0_STATUS__tr_ready__##f3##__VAL(R_SERIAL0_STATUS_, tr_ready_, v3) << R_SERIAL0_STATUS__tr_ready__BITNR) | \
- (R_SERIAL0_STATUS__rxd__##f4##__VAL(R_SERIAL0_STATUS_, rxd_, v4) << R_SERIAL0_STATUS__rxd__BITNR) | \
- (R_SERIAL0_STATUS__overrun__##f5##__VAL(R_SERIAL0_STATUS_, overrun_, v5) << R_SERIAL0_STATUS__overrun__BITNR) | \
- (R_SERIAL0_STATUS__par_err__##f6##__VAL(R_SERIAL0_STATUS_, par_err_, v6) << R_SERIAL0_STATUS__par_err__BITNR) | \
- (R_SERIAL0_STATUS__framing_err__##f7##__VAL(R_SERIAL0_STATUS_, framing_err_, v7) << R_SERIAL0_STATUS__framing_err__BITNR) | \
- (R_SERIAL0_STATUS__data_avail__##f8##__VAL(R_SERIAL0_STATUS_, data_avail_, v8) << R_SERIAL0_STATUS__data_avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL0_STATUS__xoff_detect__##f1_##_VAL(R_SERIAL0_STATUS_, xoff_detect_, v1) << R_SERIAL0_STATUS__xoff_detect__BITNR) | \
- (R_SERIAL0_STATUS__cts___##f2_##_VAL(R_SERIAL0_STATUS_, cts__, v2) << R_SERIAL0_STATUS__cts___BITNR) | \
- (R_SERIAL0_STATUS__tr_ready__##f3_##_VAL(R_SERIAL0_STATUS_, tr_ready_, v3) << R_SERIAL0_STATUS__tr_ready__BITNR) | \
- (R_SERIAL0_STATUS__rxd__##f4_##_VAL(R_SERIAL0_STATUS_, rxd_, v4) << R_SERIAL0_STATUS__rxd__BITNR) | \
- (R_SERIAL0_STATUS__overrun__##f5_##_VAL(R_SERIAL0_STATUS_, overrun_, v5) << R_SERIAL0_STATUS__overrun__BITNR) | \
- (R_SERIAL0_STATUS__par_err__##f6_##_VAL(R_SERIAL0_STATUS_, par_err_, v6) << R_SERIAL0_STATUS__par_err__BITNR) | \
- (R_SERIAL0_STATUS__framing_err__##f7_##_VAL(R_SERIAL0_STATUS_, framing_err_, v7) << R_SERIAL0_STATUS__framing_err__BITNR) | \
- (R_SERIAL0_STATUS__data_avail__##f8_##_VAL(R_SERIAL0_STATUS_, data_avail_, v8) << R_SERIAL0_STATUS__data_avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_TR_CTRL
- * - type: WO
- * - addr: 0xb0000061
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL0_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL0_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL0_TR_CTRL_) \
- REG_VAL__R_SERIAL0_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SERIAL0_TR_CTRL__WRITE(R_SERIAL0_TR_CTRL__ADDR, *R_SERIAL0_TR_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_TR_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL0_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_TR_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL0_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL0_TR_CTRL_) \
- REG_VAL__R_SERIAL0_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL0_TR_CTRL__txd__##f1##__MASK & REG__##v1) | \
- (R_SERIAL0_TR_CTRL__tr_enable__##f2##__MASK & REG__##v2) | \
- (R_SERIAL0_TR_CTRL__auto_cts__##f3##__MASK & REG__##v3) | \
- (R_SERIAL0_TR_CTRL__stop_bits__##f4##__MASK & REG__##v4) | \
- (R_SERIAL0_TR_CTRL__tr_stick_par__##f5##__MASK & REG__##v5) | \
- (R_SERIAL0_TR_CTRL__tr_par__##f6##__MASK & REG__##v6) | \
- (R_SERIAL0_TR_CTRL__tr_par_en__##f7##__MASK & REG__##v7) | \
- (R_SERIAL0_TR_CTRL__tr_bitnr__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_TR_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL0_TR_CTRL__txd__##f1##__VAL(R_SERIAL0_TR_CTRL_, txd_, v1) << R_SERIAL0_TR_CTRL__txd__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_enable__##f2##__VAL(R_SERIAL0_TR_CTRL_, tr_enable_, v2) << R_SERIAL0_TR_CTRL__tr_enable__BITNR) | \
- (R_SERIAL0_TR_CTRL__auto_cts__##f3##__VAL(R_SERIAL0_TR_CTRL_, auto_cts_, v3) << R_SERIAL0_TR_CTRL__auto_cts__BITNR) | \
- (R_SERIAL0_TR_CTRL__stop_bits__##f4##__VAL(R_SERIAL0_TR_CTRL_, stop_bits_, v4) << R_SERIAL0_TR_CTRL__stop_bits__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_stick_par__##f5##__VAL(R_SERIAL0_TR_CTRL_, tr_stick_par_, v5) << R_SERIAL0_TR_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_par__##f6##__VAL(R_SERIAL0_TR_CTRL_, tr_par_, v6) << R_SERIAL0_TR_CTRL__tr_par__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_par_en__##f7##__VAL(R_SERIAL0_TR_CTRL_, tr_par_en_, v7) << R_SERIAL0_TR_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_bitnr__##f8##__VAL(R_SERIAL0_TR_CTRL_, tr_bitnr_, v8) << R_SERIAL0_TR_CTRL__tr_bitnr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_TR_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_TR_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_TR_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL0_TR_CTRL__txd__##f1_##_VAL(R_SERIAL0_TR_CTRL_, txd_, v1) << R_SERIAL0_TR_CTRL__txd__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_enable__##f2_##_VAL(R_SERIAL0_TR_CTRL_, tr_enable_, v2) << R_SERIAL0_TR_CTRL__tr_enable__BITNR) | \
- (R_SERIAL0_TR_CTRL__auto_cts__##f3_##_VAL(R_SERIAL0_TR_CTRL_, auto_cts_, v3) << R_SERIAL0_TR_CTRL__auto_cts__BITNR) | \
- (R_SERIAL0_TR_CTRL__stop_bits__##f4_##_VAL(R_SERIAL0_TR_CTRL_, stop_bits_, v4) << R_SERIAL0_TR_CTRL__stop_bits__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_stick_par__##f5_##_VAL(R_SERIAL0_TR_CTRL_, tr_stick_par_, v5) << R_SERIAL0_TR_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_par__##f6_##_VAL(R_SERIAL0_TR_CTRL_, tr_par_, v6) << R_SERIAL0_TR_CTRL__tr_par__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_par_en__##f7_##_VAL(R_SERIAL0_TR_CTRL_, tr_par_en_, v7) << R_SERIAL0_TR_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL0_TR_CTRL__tr_bitnr__##f8_##_VAL(R_SERIAL0_TR_CTRL_, tr_bitnr_, v8) << R_SERIAL0_TR_CTRL__tr_bitnr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_TR_DATA
- * - type: WO
- * - addr: 0xb0000060
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL0_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_TR_DATA(f1,v1) ( \
- *R_SERIAL0_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SERIAL0_TR_DATA_) \
- REG_VAL__R_SERIAL0_TR_DATA_(f1##_,v1) \
- ), \
- R_SERIAL0_TR_DATA__WRITE(R_SERIAL0_TR_DATA__ADDR, *R_SERIAL0_TR_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_TR_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL0_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_TR_DATA__SHADOW(f1,v1) ( \
- *R_SERIAL0_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SERIAL0_TR_DATA_) \
- REG_VAL__R_SERIAL0_TR_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_TR_DATA(f1,v1) ( \
- (R_SERIAL0_TR_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_TR_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_TR_DATA(f1,v1) ( \
- (R_SERIAL0_TR_DATA__data_out__##f1##__VAL(R_SERIAL0_TR_DATA_, data_out_, v1) << R_SERIAL0_TR_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_TR_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_TR_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_TR_DATA_(f1_,v1) ( \
- (R_SERIAL0_TR_DATA__data_out__##f1_##_VAL(R_SERIAL0_TR_DATA_, data_out_, v1) << R_SERIAL0_TR_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL0_XOFF
- * - type: WO
- * - addr: 0xb0000064
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_XOFF.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL0_XOFF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_XOFF(f1,v1,f2,v2,f3,v3) ( \
- *R_SERIAL0_XOFF__SADDR = ( \
- REG_INITIATED(R_SERIAL0_XOFF_) \
- REG_VAL__R_SERIAL0_XOFF_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ), \
- R_SERIAL0_XOFF__WRITE(R_SERIAL0_XOFF__ADDR, *R_SERIAL0_XOFF__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL0_XOFF__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL0_XOFF.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL0_XOFF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL0_XOFF__SHADOW(f1,v1,f2,v2,f3,v3) ( \
- *R_SERIAL0_XOFF__SADDR = ( \
- REG_INITIATED(R_SERIAL0_XOFF_) \
- REG_VAL__R_SERIAL0_XOFF_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL0_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL0_XOFF(f1,v1,f2,v2,f3,v3) ( \
- (R_SERIAL0_XOFF__tx_stop__##f1##__MASK & REG__##v1) | \
- (R_SERIAL0_XOFF__auto_xoff__##f2##__MASK & REG__##v2) | \
- (R_SERIAL0_XOFF__xoff_char__##f3##__MASK & REG__##v3) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_XOFF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_XOFF(f1,v1,f2,v2,f3,v3) ( \
- (R_SERIAL0_XOFF__tx_stop__##f1##__VAL(R_SERIAL0_XOFF_, tx_stop_, v1) << R_SERIAL0_XOFF__tx_stop__BITNR) | \
- (R_SERIAL0_XOFF__auto_xoff__##f2##__VAL(R_SERIAL0_XOFF_, auto_xoff_, v2) << R_SERIAL0_XOFF__auto_xoff__BITNR) | \
- (R_SERIAL0_XOFF__xoff_char__##f3##__VAL(R_SERIAL0_XOFF_, xoff_char_, v3) << R_SERIAL0_XOFF__xoff_char__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL0_XOFF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL0_XOFF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL0_XOFF_(f1_,v1,f2_,v2,f3_,v3) ( \
- (R_SERIAL0_XOFF__tx_stop__##f1_##_VAL(R_SERIAL0_XOFF_, tx_stop_, v1) << R_SERIAL0_XOFF__tx_stop__BITNR) | \
- (R_SERIAL0_XOFF__auto_xoff__##f2_##_VAL(R_SERIAL0_XOFF_, auto_xoff_, v2) << R_SERIAL0_XOFF__auto_xoff__BITNR) | \
- (R_SERIAL0_XOFF__xoff_char__##f3_##_VAL(R_SERIAL0_XOFF_, xoff_char_, v3) << R_SERIAL0_XOFF__xoff_char__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_BAUD
- * - type: WO
- * - addr: 0xb000006b
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_BAUD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL1_BAUD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_BAUD(f1,v1,f2,v2) ( \
- *R_SERIAL1_BAUD__SADDR = ( \
- REG_INITIATED(R_SERIAL1_BAUD_) \
- REG_VAL__R_SERIAL1_BAUD_(f1##_,v1,f2##_,v2) \
- ), \
- R_SERIAL1_BAUD__WRITE(R_SERIAL1_BAUD__ADDR, *R_SERIAL1_BAUD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_BAUD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_BAUD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL1_BAUD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_BAUD__SHADOW(f1,v1,f2,v2) ( \
- *R_SERIAL1_BAUD__SADDR = ( \
- REG_INITIATED(R_SERIAL1_BAUD_) \
- REG_VAL__R_SERIAL1_BAUD_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_BAUD(f1,v1,f2,v2) ( \
- (R_SERIAL1_BAUD__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SERIAL1_BAUD__rec_baud__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_BAUD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_BAUD(f1,v1,f2,v2) ( \
- (R_SERIAL1_BAUD__tr_baud__##f1##__VAL(R_SERIAL1_BAUD_, tr_baud_, v1) << R_SERIAL1_BAUD__tr_baud__BITNR) | \
- (R_SERIAL1_BAUD__rec_baud__##f2##__VAL(R_SERIAL1_BAUD_, rec_baud_, v2) << R_SERIAL1_BAUD__rec_baud__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_BAUD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_BAUD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_BAUD_(f1_,v1,f2_,v2) ( \
- (R_SERIAL1_BAUD__tr_baud__##f1_##_VAL(R_SERIAL1_BAUD_, tr_baud_, v1) << R_SERIAL1_BAUD__tr_baud__BITNR) | \
- (R_SERIAL1_BAUD__rec_baud__##f2_##_VAL(R_SERIAL1_BAUD_, rec_baud_, v2) << R_SERIAL1_BAUD__rec_baud__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_CTRL
- * - type: WO
- * - addr: 0xb0000068
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL1_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_SERIAL1_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL1_CTRL_) \
- REG_VAL__R_SERIAL1_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ), \
- R_SERIAL1_CTRL__WRITE(R_SERIAL1_CTRL__ADDR, *R_SERIAL1_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL1_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_SERIAL1_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL1_CTRL_) \
- REG_VAL__R_SERIAL1_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_SERIAL1_CTRL__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SERIAL1_CTRL__rec_baud__##f2##__MASK & REG__##v2) | \
- (R_SERIAL1_CTRL__dma_err__##f3##__MASK & REG__##v3) | \
- (R_SERIAL1_CTRL__rec_enable__##f4##__MASK & REG__##v4) | \
- (R_SERIAL1_CTRL__rts___##f5##__MASK & REG__##v5) | \
- (R_SERIAL1_CTRL__sampling__##f6##__MASK & REG__##v6) | \
- (R_SERIAL1_CTRL__rec_stick_par__##f7##__MASK & REG__##v7) | \
- (R_SERIAL1_CTRL__rec_par__##f8##__MASK & REG__##v8) | \
- (R_SERIAL1_CTRL__rec_par_en__##f9##__MASK & REG__##v9) | \
- (R_SERIAL1_CTRL__rec_bitnr__##f10##__MASK & REG__##v10) | \
- (R_SERIAL1_CTRL__txd__##f11##__MASK & REG__##v11) | \
- (R_SERIAL1_CTRL__tr_enable__##f12##__MASK & REG__##v12) | \
- (R_SERIAL1_CTRL__auto_cts__##f13##__MASK & REG__##v13) | \
- (R_SERIAL1_CTRL__stop_bits__##f14##__MASK & REG__##v14) | \
- (R_SERIAL1_CTRL__tr_stick_par__##f15##__MASK & REG__##v15) | \
- (R_SERIAL1_CTRL__tr_par__##f16##__MASK & REG__##v16) | \
- (R_SERIAL1_CTRL__tr_par_en__##f17##__MASK & REG__##v17) | \
- (R_SERIAL1_CTRL__tr_bitnr__##f18##__MASK & REG__##v18) | \
- (R_SERIAL1_CTRL__data_out__##f19##__MASK & REG__##v19) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_SERIAL1_CTRL__tr_baud__##f1##__VAL(R_SERIAL1_CTRL_, tr_baud_, v1) << R_SERIAL1_CTRL__tr_baud__BITNR) | \
- (R_SERIAL1_CTRL__rec_baud__##f2##__VAL(R_SERIAL1_CTRL_, rec_baud_, v2) << R_SERIAL1_CTRL__rec_baud__BITNR) | \
- (R_SERIAL1_CTRL__dma_err__##f3##__VAL(R_SERIAL1_CTRL_, dma_err_, v3) << R_SERIAL1_CTRL__dma_err__BITNR) | \
- (R_SERIAL1_CTRL__rec_enable__##f4##__VAL(R_SERIAL1_CTRL_, rec_enable_, v4) << R_SERIAL1_CTRL__rec_enable__BITNR) | \
- (R_SERIAL1_CTRL__rts___##f5##__VAL(R_SERIAL1_CTRL_, rts__, v5) << R_SERIAL1_CTRL__rts___BITNR) | \
- (R_SERIAL1_CTRL__sampling__##f6##__VAL(R_SERIAL1_CTRL_, sampling_, v6) << R_SERIAL1_CTRL__sampling__BITNR) | \
- (R_SERIAL1_CTRL__rec_stick_par__##f7##__VAL(R_SERIAL1_CTRL_, rec_stick_par_, v7) << R_SERIAL1_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL1_CTRL__rec_par__##f8##__VAL(R_SERIAL1_CTRL_, rec_par_, v8) << R_SERIAL1_CTRL__rec_par__BITNR) | \
- (R_SERIAL1_CTRL__rec_par_en__##f9##__VAL(R_SERIAL1_CTRL_, rec_par_en_, v9) << R_SERIAL1_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL1_CTRL__rec_bitnr__##f10##__VAL(R_SERIAL1_CTRL_, rec_bitnr_, v10) << R_SERIAL1_CTRL__rec_bitnr__BITNR) | \
- (R_SERIAL1_CTRL__txd__##f11##__VAL(R_SERIAL1_CTRL_, txd_, v11) << R_SERIAL1_CTRL__txd__BITNR) | \
- (R_SERIAL1_CTRL__tr_enable__##f12##__VAL(R_SERIAL1_CTRL_, tr_enable_, v12) << R_SERIAL1_CTRL__tr_enable__BITNR) | \
- (R_SERIAL1_CTRL__auto_cts__##f13##__VAL(R_SERIAL1_CTRL_, auto_cts_, v13) << R_SERIAL1_CTRL__auto_cts__BITNR) | \
- (R_SERIAL1_CTRL__stop_bits__##f14##__VAL(R_SERIAL1_CTRL_, stop_bits_, v14) << R_SERIAL1_CTRL__stop_bits__BITNR) | \
- (R_SERIAL1_CTRL__tr_stick_par__##f15##__VAL(R_SERIAL1_CTRL_, tr_stick_par_, v15) << R_SERIAL1_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL1_CTRL__tr_par__##f16##__VAL(R_SERIAL1_CTRL_, tr_par_, v16) << R_SERIAL1_CTRL__tr_par__BITNR) | \
- (R_SERIAL1_CTRL__tr_par_en__##f17##__VAL(R_SERIAL1_CTRL_, tr_par_en_, v17) << R_SERIAL1_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL1_CTRL__tr_bitnr__##f18##__VAL(R_SERIAL1_CTRL_, tr_bitnr_, v18) << R_SERIAL1_CTRL__tr_bitnr__BITNR) | \
- (R_SERIAL1_CTRL__data_out__##f19##__VAL(R_SERIAL1_CTRL_, data_out_, v19) << R_SERIAL1_CTRL__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19) ( \
- (R_SERIAL1_CTRL__tr_baud__##f1_##_VAL(R_SERIAL1_CTRL_, tr_baud_, v1) << R_SERIAL1_CTRL__tr_baud__BITNR) | \
- (R_SERIAL1_CTRL__rec_baud__##f2_##_VAL(R_SERIAL1_CTRL_, rec_baud_, v2) << R_SERIAL1_CTRL__rec_baud__BITNR) | \
- (R_SERIAL1_CTRL__dma_err__##f3_##_VAL(R_SERIAL1_CTRL_, dma_err_, v3) << R_SERIAL1_CTRL__dma_err__BITNR) | \
- (R_SERIAL1_CTRL__rec_enable__##f4_##_VAL(R_SERIAL1_CTRL_, rec_enable_, v4) << R_SERIAL1_CTRL__rec_enable__BITNR) | \
- (R_SERIAL1_CTRL__rts___##f5_##_VAL(R_SERIAL1_CTRL_, rts__, v5) << R_SERIAL1_CTRL__rts___BITNR) | \
- (R_SERIAL1_CTRL__sampling__##f6_##_VAL(R_SERIAL1_CTRL_, sampling_, v6) << R_SERIAL1_CTRL__sampling__BITNR) | \
- (R_SERIAL1_CTRL__rec_stick_par__##f7_##_VAL(R_SERIAL1_CTRL_, rec_stick_par_, v7) << R_SERIAL1_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL1_CTRL__rec_par__##f8_##_VAL(R_SERIAL1_CTRL_, rec_par_, v8) << R_SERIAL1_CTRL__rec_par__BITNR) | \
- (R_SERIAL1_CTRL__rec_par_en__##f9_##_VAL(R_SERIAL1_CTRL_, rec_par_en_, v9) << R_SERIAL1_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL1_CTRL__rec_bitnr__##f10_##_VAL(R_SERIAL1_CTRL_, rec_bitnr_, v10) << R_SERIAL1_CTRL__rec_bitnr__BITNR) | \
- (R_SERIAL1_CTRL__txd__##f11_##_VAL(R_SERIAL1_CTRL_, txd_, v11) << R_SERIAL1_CTRL__txd__BITNR) | \
- (R_SERIAL1_CTRL__tr_enable__##f12_##_VAL(R_SERIAL1_CTRL_, tr_enable_, v12) << R_SERIAL1_CTRL__tr_enable__BITNR) | \
- (R_SERIAL1_CTRL__auto_cts__##f13_##_VAL(R_SERIAL1_CTRL_, auto_cts_, v13) << R_SERIAL1_CTRL__auto_cts__BITNR) | \
- (R_SERIAL1_CTRL__stop_bits__##f14_##_VAL(R_SERIAL1_CTRL_, stop_bits_, v14) << R_SERIAL1_CTRL__stop_bits__BITNR) | \
- (R_SERIAL1_CTRL__tr_stick_par__##f15_##_VAL(R_SERIAL1_CTRL_, tr_stick_par_, v15) << R_SERIAL1_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL1_CTRL__tr_par__##f16_##_VAL(R_SERIAL1_CTRL_, tr_par_, v16) << R_SERIAL1_CTRL__tr_par__BITNR) | \
- (R_SERIAL1_CTRL__tr_par_en__##f17_##_VAL(R_SERIAL1_CTRL_, tr_par_en_, v17) << R_SERIAL1_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL1_CTRL__tr_bitnr__##f18_##_VAL(R_SERIAL1_CTRL_, tr_bitnr_, v18) << R_SERIAL1_CTRL__tr_bitnr__BITNR) | \
- (R_SERIAL1_CTRL__data_out__##f19_##_VAL(R_SERIAL1_CTRL_, data_out_, v19) << R_SERIAL1_CTRL__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_READ
- * - type: RO
- * - addr: 0xb0000068
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SERIAL1_READ__xoff_detect__##f1##__MASK & REG__##v1) | \
- (R_SERIAL1_READ__cts___##f2##__MASK & REG__##v2) | \
- (R_SERIAL1_READ__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SERIAL1_READ__rxd__##f4##__MASK & REG__##v4) | \
- (R_SERIAL1_READ__overrun__##f5##__MASK & REG__##v5) | \
- (R_SERIAL1_READ__par_err__##f6##__MASK & REG__##v6) | \
- (R_SERIAL1_READ__framing_err__##f7##__MASK & REG__##v7) | \
- (R_SERIAL1_READ__data_avail__##f8##__MASK & REG__##v8) | \
- (R_SERIAL1_READ__data_in__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SERIAL1_READ__xoff_detect__##f1##__VAL(R_SERIAL1_READ_, xoff_detect_, v1) << R_SERIAL1_READ__xoff_detect__BITNR) | \
- (R_SERIAL1_READ__cts___##f2##__VAL(R_SERIAL1_READ_, cts__, v2) << R_SERIAL1_READ__cts___BITNR) | \
- (R_SERIAL1_READ__tr_ready__##f3##__VAL(R_SERIAL1_READ_, tr_ready_, v3) << R_SERIAL1_READ__tr_ready__BITNR) | \
- (R_SERIAL1_READ__rxd__##f4##__VAL(R_SERIAL1_READ_, rxd_, v4) << R_SERIAL1_READ__rxd__BITNR) | \
- (R_SERIAL1_READ__overrun__##f5##__VAL(R_SERIAL1_READ_, overrun_, v5) << R_SERIAL1_READ__overrun__BITNR) | \
- (R_SERIAL1_READ__par_err__##f6##__VAL(R_SERIAL1_READ_, par_err_, v6) << R_SERIAL1_READ__par_err__BITNR) | \
- (R_SERIAL1_READ__framing_err__##f7##__VAL(R_SERIAL1_READ_, framing_err_, v7) << R_SERIAL1_READ__framing_err__BITNR) | \
- (R_SERIAL1_READ__data_avail__##f8##__VAL(R_SERIAL1_READ_, data_avail_, v8) << R_SERIAL1_READ__data_avail__BITNR) | \
- (R_SERIAL1_READ__data_in__##f9##__VAL(R_SERIAL1_READ_, data_in_, v9) << R_SERIAL1_READ__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_READ_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_SERIAL1_READ__xoff_detect__##f1_##_VAL(R_SERIAL1_READ_, xoff_detect_, v1) << R_SERIAL1_READ__xoff_detect__BITNR) | \
- (R_SERIAL1_READ__cts___##f2_##_VAL(R_SERIAL1_READ_, cts__, v2) << R_SERIAL1_READ__cts___BITNR) | \
- (R_SERIAL1_READ__tr_ready__##f3_##_VAL(R_SERIAL1_READ_, tr_ready_, v3) << R_SERIAL1_READ__tr_ready__BITNR) | \
- (R_SERIAL1_READ__rxd__##f4_##_VAL(R_SERIAL1_READ_, rxd_, v4) << R_SERIAL1_READ__rxd__BITNR) | \
- (R_SERIAL1_READ__overrun__##f5_##_VAL(R_SERIAL1_READ_, overrun_, v5) << R_SERIAL1_READ__overrun__BITNR) | \
- (R_SERIAL1_READ__par_err__##f6_##_VAL(R_SERIAL1_READ_, par_err_, v6) << R_SERIAL1_READ__par_err__BITNR) | \
- (R_SERIAL1_READ__framing_err__##f7_##_VAL(R_SERIAL1_READ_, framing_err_, v7) << R_SERIAL1_READ__framing_err__BITNR) | \
- (R_SERIAL1_READ__data_avail__##f8_##_VAL(R_SERIAL1_READ_, data_avail_, v8) << R_SERIAL1_READ__data_avail__BITNR) | \
- (R_SERIAL1_READ__data_in__##f9_##_VAL(R_SERIAL1_READ_, data_in_, v9) << R_SERIAL1_READ__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_REC_CTRL
- * - type: WO
- * - addr: 0xb000006a
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_REC_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL1_REC_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL1_REC_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL1_REC_CTRL_) \
- REG_VAL__R_SERIAL1_REC_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SERIAL1_REC_CTRL__WRITE(R_SERIAL1_REC_CTRL__ADDR, *R_SERIAL1_REC_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_REC_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_REC_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL1_REC_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_REC_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL1_REC_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL1_REC_CTRL_) \
- REG_VAL__R_SERIAL1_REC_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL1_REC_CTRL__dma_err__##f1##__MASK & REG__##v1) | \
- (R_SERIAL1_REC_CTRL__rec_enable__##f2##__MASK & REG__##v2) | \
- (R_SERIAL1_REC_CTRL__rts___##f3##__MASK & REG__##v3) | \
- (R_SERIAL1_REC_CTRL__sampling__##f4##__MASK & REG__##v4) | \
- (R_SERIAL1_REC_CTRL__rec_stick_par__##f5##__MASK & REG__##v5) | \
- (R_SERIAL1_REC_CTRL__rec_par__##f6##__MASK & REG__##v6) | \
- (R_SERIAL1_REC_CTRL__rec_par_en__##f7##__MASK & REG__##v7) | \
- (R_SERIAL1_REC_CTRL__rec_bitnr__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_REC_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL1_REC_CTRL__dma_err__##f1##__VAL(R_SERIAL1_REC_CTRL_, dma_err_, v1) << R_SERIAL1_REC_CTRL__dma_err__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_enable__##f2##__VAL(R_SERIAL1_REC_CTRL_, rec_enable_, v2) << R_SERIAL1_REC_CTRL__rec_enable__BITNR) | \
- (R_SERIAL1_REC_CTRL__rts___##f3##__VAL(R_SERIAL1_REC_CTRL_, rts__, v3) << R_SERIAL1_REC_CTRL__rts___BITNR) | \
- (R_SERIAL1_REC_CTRL__sampling__##f4##__VAL(R_SERIAL1_REC_CTRL_, sampling_, v4) << R_SERIAL1_REC_CTRL__sampling__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_stick_par__##f5##__VAL(R_SERIAL1_REC_CTRL_, rec_stick_par_, v5) << R_SERIAL1_REC_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_par__##f6##__VAL(R_SERIAL1_REC_CTRL_, rec_par_, v6) << R_SERIAL1_REC_CTRL__rec_par__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_par_en__##f7##__VAL(R_SERIAL1_REC_CTRL_, rec_par_en_, v7) << R_SERIAL1_REC_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_bitnr__##f8##__VAL(R_SERIAL1_REC_CTRL_, rec_bitnr_, v8) << R_SERIAL1_REC_CTRL__rec_bitnr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_REC_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_REC_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_REC_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL1_REC_CTRL__dma_err__##f1_##_VAL(R_SERIAL1_REC_CTRL_, dma_err_, v1) << R_SERIAL1_REC_CTRL__dma_err__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_enable__##f2_##_VAL(R_SERIAL1_REC_CTRL_, rec_enable_, v2) << R_SERIAL1_REC_CTRL__rec_enable__BITNR) | \
- (R_SERIAL1_REC_CTRL__rts___##f3_##_VAL(R_SERIAL1_REC_CTRL_, rts__, v3) << R_SERIAL1_REC_CTRL__rts___BITNR) | \
- (R_SERIAL1_REC_CTRL__sampling__##f4_##_VAL(R_SERIAL1_REC_CTRL_, sampling_, v4) << R_SERIAL1_REC_CTRL__sampling__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_stick_par__##f5_##_VAL(R_SERIAL1_REC_CTRL_, rec_stick_par_, v5) << R_SERIAL1_REC_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_par__##f6_##_VAL(R_SERIAL1_REC_CTRL_, rec_par_, v6) << R_SERIAL1_REC_CTRL__rec_par__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_par_en__##f7_##_VAL(R_SERIAL1_REC_CTRL_, rec_par_en_, v7) << R_SERIAL1_REC_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL1_REC_CTRL__rec_bitnr__##f8_##_VAL(R_SERIAL1_REC_CTRL_, rec_bitnr_, v8) << R_SERIAL1_REC_CTRL__rec_bitnr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_REC_DATA
- * - type: RO
- * - addr: 0xb0000068
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_REC_DATA(f1,v1) ( \
- (R_SERIAL1_REC_DATA__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_REC_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_REC_DATA(f1,v1) ( \
- (R_SERIAL1_REC_DATA__data_in__##f1##__VAL(R_SERIAL1_REC_DATA_, data_in_, v1) << R_SERIAL1_REC_DATA__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_REC_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_REC_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_REC_DATA_(f1_,v1) ( \
- (R_SERIAL1_REC_DATA__data_in__##f1_##_VAL(R_SERIAL1_REC_DATA_, data_in_, v1) << R_SERIAL1_REC_DATA__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_STATUS
- * - type: RO
- * - addr: 0xb0000069
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL1_STATUS__xoff_detect__##f1##__MASK & REG__##v1) | \
- (R_SERIAL1_STATUS__cts___##f2##__MASK & REG__##v2) | \
- (R_SERIAL1_STATUS__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SERIAL1_STATUS__rxd__##f4##__MASK & REG__##v4) | \
- (R_SERIAL1_STATUS__overrun__##f5##__MASK & REG__##v5) | \
- (R_SERIAL1_STATUS__par_err__##f6##__MASK & REG__##v6) | \
- (R_SERIAL1_STATUS__framing_err__##f7##__MASK & REG__##v7) | \
- (R_SERIAL1_STATUS__data_avail__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL1_STATUS__xoff_detect__##f1##__VAL(R_SERIAL1_STATUS_, xoff_detect_, v1) << R_SERIAL1_STATUS__xoff_detect__BITNR) | \
- (R_SERIAL1_STATUS__cts___##f2##__VAL(R_SERIAL1_STATUS_, cts__, v2) << R_SERIAL1_STATUS__cts___BITNR) | \
- (R_SERIAL1_STATUS__tr_ready__##f3##__VAL(R_SERIAL1_STATUS_, tr_ready_, v3) << R_SERIAL1_STATUS__tr_ready__BITNR) | \
- (R_SERIAL1_STATUS__rxd__##f4##__VAL(R_SERIAL1_STATUS_, rxd_, v4) << R_SERIAL1_STATUS__rxd__BITNR) | \
- (R_SERIAL1_STATUS__overrun__##f5##__VAL(R_SERIAL1_STATUS_, overrun_, v5) << R_SERIAL1_STATUS__overrun__BITNR) | \
- (R_SERIAL1_STATUS__par_err__##f6##__VAL(R_SERIAL1_STATUS_, par_err_, v6) << R_SERIAL1_STATUS__par_err__BITNR) | \
- (R_SERIAL1_STATUS__framing_err__##f7##__VAL(R_SERIAL1_STATUS_, framing_err_, v7) << R_SERIAL1_STATUS__framing_err__BITNR) | \
- (R_SERIAL1_STATUS__data_avail__##f8##__VAL(R_SERIAL1_STATUS_, data_avail_, v8) << R_SERIAL1_STATUS__data_avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL1_STATUS__xoff_detect__##f1_##_VAL(R_SERIAL1_STATUS_, xoff_detect_, v1) << R_SERIAL1_STATUS__xoff_detect__BITNR) | \
- (R_SERIAL1_STATUS__cts___##f2_##_VAL(R_SERIAL1_STATUS_, cts__, v2) << R_SERIAL1_STATUS__cts___BITNR) | \
- (R_SERIAL1_STATUS__tr_ready__##f3_##_VAL(R_SERIAL1_STATUS_, tr_ready_, v3) << R_SERIAL1_STATUS__tr_ready__BITNR) | \
- (R_SERIAL1_STATUS__rxd__##f4_##_VAL(R_SERIAL1_STATUS_, rxd_, v4) << R_SERIAL1_STATUS__rxd__BITNR) | \
- (R_SERIAL1_STATUS__overrun__##f5_##_VAL(R_SERIAL1_STATUS_, overrun_, v5) << R_SERIAL1_STATUS__overrun__BITNR) | \
- (R_SERIAL1_STATUS__par_err__##f6_##_VAL(R_SERIAL1_STATUS_, par_err_, v6) << R_SERIAL1_STATUS__par_err__BITNR) | \
- (R_SERIAL1_STATUS__framing_err__##f7_##_VAL(R_SERIAL1_STATUS_, framing_err_, v7) << R_SERIAL1_STATUS__framing_err__BITNR) | \
- (R_SERIAL1_STATUS__data_avail__##f8_##_VAL(R_SERIAL1_STATUS_, data_avail_, v8) << R_SERIAL1_STATUS__data_avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_TR_CTRL
- * - type: WO
- * - addr: 0xb0000069
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL1_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL1_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL1_TR_CTRL_) \
- REG_VAL__R_SERIAL1_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SERIAL1_TR_CTRL__WRITE(R_SERIAL1_TR_CTRL__ADDR, *R_SERIAL1_TR_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_TR_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL1_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_TR_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL1_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL1_TR_CTRL_) \
- REG_VAL__R_SERIAL1_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL1_TR_CTRL__txd__##f1##__MASK & REG__##v1) | \
- (R_SERIAL1_TR_CTRL__tr_enable__##f2##__MASK & REG__##v2) | \
- (R_SERIAL1_TR_CTRL__auto_cts__##f3##__MASK & REG__##v3) | \
- (R_SERIAL1_TR_CTRL__stop_bits__##f4##__MASK & REG__##v4) | \
- (R_SERIAL1_TR_CTRL__tr_stick_par__##f5##__MASK & REG__##v5) | \
- (R_SERIAL1_TR_CTRL__tr_par__##f6##__MASK & REG__##v6) | \
- (R_SERIAL1_TR_CTRL__tr_par_en__##f7##__MASK & REG__##v7) | \
- (R_SERIAL1_TR_CTRL__tr_bitnr__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_TR_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL1_TR_CTRL__txd__##f1##__VAL(R_SERIAL1_TR_CTRL_, txd_, v1) << R_SERIAL1_TR_CTRL__txd__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_enable__##f2##__VAL(R_SERIAL1_TR_CTRL_, tr_enable_, v2) << R_SERIAL1_TR_CTRL__tr_enable__BITNR) | \
- (R_SERIAL1_TR_CTRL__auto_cts__##f3##__VAL(R_SERIAL1_TR_CTRL_, auto_cts_, v3) << R_SERIAL1_TR_CTRL__auto_cts__BITNR) | \
- (R_SERIAL1_TR_CTRL__stop_bits__##f4##__VAL(R_SERIAL1_TR_CTRL_, stop_bits_, v4) << R_SERIAL1_TR_CTRL__stop_bits__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_stick_par__##f5##__VAL(R_SERIAL1_TR_CTRL_, tr_stick_par_, v5) << R_SERIAL1_TR_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_par__##f6##__VAL(R_SERIAL1_TR_CTRL_, tr_par_, v6) << R_SERIAL1_TR_CTRL__tr_par__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_par_en__##f7##__VAL(R_SERIAL1_TR_CTRL_, tr_par_en_, v7) << R_SERIAL1_TR_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_bitnr__##f8##__VAL(R_SERIAL1_TR_CTRL_, tr_bitnr_, v8) << R_SERIAL1_TR_CTRL__tr_bitnr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_TR_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_TR_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_TR_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL1_TR_CTRL__txd__##f1_##_VAL(R_SERIAL1_TR_CTRL_, txd_, v1) << R_SERIAL1_TR_CTRL__txd__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_enable__##f2_##_VAL(R_SERIAL1_TR_CTRL_, tr_enable_, v2) << R_SERIAL1_TR_CTRL__tr_enable__BITNR) | \
- (R_SERIAL1_TR_CTRL__auto_cts__##f3_##_VAL(R_SERIAL1_TR_CTRL_, auto_cts_, v3) << R_SERIAL1_TR_CTRL__auto_cts__BITNR) | \
- (R_SERIAL1_TR_CTRL__stop_bits__##f4_##_VAL(R_SERIAL1_TR_CTRL_, stop_bits_, v4) << R_SERIAL1_TR_CTRL__stop_bits__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_stick_par__##f5_##_VAL(R_SERIAL1_TR_CTRL_, tr_stick_par_, v5) << R_SERIAL1_TR_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_par__##f6_##_VAL(R_SERIAL1_TR_CTRL_, tr_par_, v6) << R_SERIAL1_TR_CTRL__tr_par__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_par_en__##f7_##_VAL(R_SERIAL1_TR_CTRL_, tr_par_en_, v7) << R_SERIAL1_TR_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL1_TR_CTRL__tr_bitnr__##f8_##_VAL(R_SERIAL1_TR_CTRL_, tr_bitnr_, v8) << R_SERIAL1_TR_CTRL__tr_bitnr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_TR_DATA
- * - type: WO
- * - addr: 0xb0000068
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL1_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_TR_DATA(f1,v1) ( \
- *R_SERIAL1_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SERIAL1_TR_DATA_) \
- REG_VAL__R_SERIAL1_TR_DATA_(f1##_,v1) \
- ), \
- R_SERIAL1_TR_DATA__WRITE(R_SERIAL1_TR_DATA__ADDR, *R_SERIAL1_TR_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_TR_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL1_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_TR_DATA__SHADOW(f1,v1) ( \
- *R_SERIAL1_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SERIAL1_TR_DATA_) \
- REG_VAL__R_SERIAL1_TR_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_TR_DATA(f1,v1) ( \
- (R_SERIAL1_TR_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_TR_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_TR_DATA(f1,v1) ( \
- (R_SERIAL1_TR_DATA__data_out__##f1##__VAL(R_SERIAL1_TR_DATA_, data_out_, v1) << R_SERIAL1_TR_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_TR_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_TR_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_TR_DATA_(f1_,v1) ( \
- (R_SERIAL1_TR_DATA__data_out__##f1_##_VAL(R_SERIAL1_TR_DATA_, data_out_, v1) << R_SERIAL1_TR_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL1_XOFF
- * - type: WO
- * - addr: 0xb000006c
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_XOFF.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL1_XOFF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_XOFF(f1,v1,f2,v2,f3,v3) ( \
- *R_SERIAL1_XOFF__SADDR = ( \
- REG_INITIATED(R_SERIAL1_XOFF_) \
- REG_VAL__R_SERIAL1_XOFF_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ), \
- R_SERIAL1_XOFF__WRITE(R_SERIAL1_XOFF__ADDR, *R_SERIAL1_XOFF__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL1_XOFF__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL1_XOFF.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL1_XOFF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL1_XOFF__SHADOW(f1,v1,f2,v2,f3,v3) ( \
- *R_SERIAL1_XOFF__SADDR = ( \
- REG_INITIATED(R_SERIAL1_XOFF_) \
- REG_VAL__R_SERIAL1_XOFF_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL1_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL1_XOFF(f1,v1,f2,v2,f3,v3) ( \
- (R_SERIAL1_XOFF__tx_stop__##f1##__MASK & REG__##v1) | \
- (R_SERIAL1_XOFF__auto_xoff__##f2##__MASK & REG__##v2) | \
- (R_SERIAL1_XOFF__xoff_char__##f3##__MASK & REG__##v3) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_XOFF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_XOFF(f1,v1,f2,v2,f3,v3) ( \
- (R_SERIAL1_XOFF__tx_stop__##f1##__VAL(R_SERIAL1_XOFF_, tx_stop_, v1) << R_SERIAL1_XOFF__tx_stop__BITNR) | \
- (R_SERIAL1_XOFF__auto_xoff__##f2##__VAL(R_SERIAL1_XOFF_, auto_xoff_, v2) << R_SERIAL1_XOFF__auto_xoff__BITNR) | \
- (R_SERIAL1_XOFF__xoff_char__##f3##__VAL(R_SERIAL1_XOFF_, xoff_char_, v3) << R_SERIAL1_XOFF__xoff_char__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL1_XOFF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL1_XOFF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL1_XOFF_(f1_,v1,f2_,v2,f3_,v3) ( \
- (R_SERIAL1_XOFF__tx_stop__##f1_##_VAL(R_SERIAL1_XOFF_, tx_stop_, v1) << R_SERIAL1_XOFF__tx_stop__BITNR) | \
- (R_SERIAL1_XOFF__auto_xoff__##f2_##_VAL(R_SERIAL1_XOFF_, auto_xoff_, v2) << R_SERIAL1_XOFF__auto_xoff__BITNR) | \
- (R_SERIAL1_XOFF__xoff_char__##f3_##_VAL(R_SERIAL1_XOFF_, xoff_char_, v3) << R_SERIAL1_XOFF__xoff_char__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_BAUD
- * - type: WO
- * - addr: 0xb0000073
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_BAUD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL2_BAUD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_BAUD(f1,v1,f2,v2) ( \
- *R_SERIAL2_BAUD__SADDR = ( \
- REG_INITIATED(R_SERIAL2_BAUD_) \
- REG_VAL__R_SERIAL2_BAUD_(f1##_,v1,f2##_,v2) \
- ), \
- R_SERIAL2_BAUD__WRITE(R_SERIAL2_BAUD__ADDR, *R_SERIAL2_BAUD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_BAUD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_BAUD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL2_BAUD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_BAUD__SHADOW(f1,v1,f2,v2) ( \
- *R_SERIAL2_BAUD__SADDR = ( \
- REG_INITIATED(R_SERIAL2_BAUD_) \
- REG_VAL__R_SERIAL2_BAUD_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_BAUD(f1,v1,f2,v2) ( \
- (R_SERIAL2_BAUD__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SERIAL2_BAUD__rec_baud__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_BAUD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_BAUD(f1,v1,f2,v2) ( \
- (R_SERIAL2_BAUD__tr_baud__##f1##__VAL(R_SERIAL2_BAUD_, tr_baud_, v1) << R_SERIAL2_BAUD__tr_baud__BITNR) | \
- (R_SERIAL2_BAUD__rec_baud__##f2##__VAL(R_SERIAL2_BAUD_, rec_baud_, v2) << R_SERIAL2_BAUD__rec_baud__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_BAUD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_BAUD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_BAUD_(f1_,v1,f2_,v2) ( \
- (R_SERIAL2_BAUD__tr_baud__##f1_##_VAL(R_SERIAL2_BAUD_, tr_baud_, v1) << R_SERIAL2_BAUD__tr_baud__BITNR) | \
- (R_SERIAL2_BAUD__rec_baud__##f2_##_VAL(R_SERIAL2_BAUD_, rec_baud_, v2) << R_SERIAL2_BAUD__rec_baud__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_CTRL
- * - type: WO
- * - addr: 0xb0000070
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL2_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_SERIAL2_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL2_CTRL_) \
- REG_VAL__R_SERIAL2_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ), \
- R_SERIAL2_CTRL__WRITE(R_SERIAL2_CTRL__ADDR, *R_SERIAL2_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL2_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_SERIAL2_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL2_CTRL_) \
- REG_VAL__R_SERIAL2_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_SERIAL2_CTRL__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SERIAL2_CTRL__rec_baud__##f2##__MASK & REG__##v2) | \
- (R_SERIAL2_CTRL__dma_err__##f3##__MASK & REG__##v3) | \
- (R_SERIAL2_CTRL__rec_enable__##f4##__MASK & REG__##v4) | \
- (R_SERIAL2_CTRL__rts___##f5##__MASK & REG__##v5) | \
- (R_SERIAL2_CTRL__sampling__##f6##__MASK & REG__##v6) | \
- (R_SERIAL2_CTRL__rec_stick_par__##f7##__MASK & REG__##v7) | \
- (R_SERIAL2_CTRL__rec_par__##f8##__MASK & REG__##v8) | \
- (R_SERIAL2_CTRL__rec_par_en__##f9##__MASK & REG__##v9) | \
- (R_SERIAL2_CTRL__rec_bitnr__##f10##__MASK & REG__##v10) | \
- (R_SERIAL2_CTRL__txd__##f11##__MASK & REG__##v11) | \
- (R_SERIAL2_CTRL__tr_enable__##f12##__MASK & REG__##v12) | \
- (R_SERIAL2_CTRL__auto_cts__##f13##__MASK & REG__##v13) | \
- (R_SERIAL2_CTRL__stop_bits__##f14##__MASK & REG__##v14) | \
- (R_SERIAL2_CTRL__tr_stick_par__##f15##__MASK & REG__##v15) | \
- (R_SERIAL2_CTRL__tr_par__##f16##__MASK & REG__##v16) | \
- (R_SERIAL2_CTRL__tr_par_en__##f17##__MASK & REG__##v17) | \
- (R_SERIAL2_CTRL__tr_bitnr__##f18##__MASK & REG__##v18) | \
- (R_SERIAL2_CTRL__data_out__##f19##__MASK & REG__##v19) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_SERIAL2_CTRL__tr_baud__##f1##__VAL(R_SERIAL2_CTRL_, tr_baud_, v1) << R_SERIAL2_CTRL__tr_baud__BITNR) | \
- (R_SERIAL2_CTRL__rec_baud__##f2##__VAL(R_SERIAL2_CTRL_, rec_baud_, v2) << R_SERIAL2_CTRL__rec_baud__BITNR) | \
- (R_SERIAL2_CTRL__dma_err__##f3##__VAL(R_SERIAL2_CTRL_, dma_err_, v3) << R_SERIAL2_CTRL__dma_err__BITNR) | \
- (R_SERIAL2_CTRL__rec_enable__##f4##__VAL(R_SERIAL2_CTRL_, rec_enable_, v4) << R_SERIAL2_CTRL__rec_enable__BITNR) | \
- (R_SERIAL2_CTRL__rts___##f5##__VAL(R_SERIAL2_CTRL_, rts__, v5) << R_SERIAL2_CTRL__rts___BITNR) | \
- (R_SERIAL2_CTRL__sampling__##f6##__VAL(R_SERIAL2_CTRL_, sampling_, v6) << R_SERIAL2_CTRL__sampling__BITNR) | \
- (R_SERIAL2_CTRL__rec_stick_par__##f7##__VAL(R_SERIAL2_CTRL_, rec_stick_par_, v7) << R_SERIAL2_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL2_CTRL__rec_par__##f8##__VAL(R_SERIAL2_CTRL_, rec_par_, v8) << R_SERIAL2_CTRL__rec_par__BITNR) | \
- (R_SERIAL2_CTRL__rec_par_en__##f9##__VAL(R_SERIAL2_CTRL_, rec_par_en_, v9) << R_SERIAL2_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL2_CTRL__rec_bitnr__##f10##__VAL(R_SERIAL2_CTRL_, rec_bitnr_, v10) << R_SERIAL2_CTRL__rec_bitnr__BITNR) | \
- (R_SERIAL2_CTRL__txd__##f11##__VAL(R_SERIAL2_CTRL_, txd_, v11) << R_SERIAL2_CTRL__txd__BITNR) | \
- (R_SERIAL2_CTRL__tr_enable__##f12##__VAL(R_SERIAL2_CTRL_, tr_enable_, v12) << R_SERIAL2_CTRL__tr_enable__BITNR) | \
- (R_SERIAL2_CTRL__auto_cts__##f13##__VAL(R_SERIAL2_CTRL_, auto_cts_, v13) << R_SERIAL2_CTRL__auto_cts__BITNR) | \
- (R_SERIAL2_CTRL__stop_bits__##f14##__VAL(R_SERIAL2_CTRL_, stop_bits_, v14) << R_SERIAL2_CTRL__stop_bits__BITNR) | \
- (R_SERIAL2_CTRL__tr_stick_par__##f15##__VAL(R_SERIAL2_CTRL_, tr_stick_par_, v15) << R_SERIAL2_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL2_CTRL__tr_par__##f16##__VAL(R_SERIAL2_CTRL_, tr_par_, v16) << R_SERIAL2_CTRL__tr_par__BITNR) | \
- (R_SERIAL2_CTRL__tr_par_en__##f17##__VAL(R_SERIAL2_CTRL_, tr_par_en_, v17) << R_SERIAL2_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL2_CTRL__tr_bitnr__##f18##__VAL(R_SERIAL2_CTRL_, tr_bitnr_, v18) << R_SERIAL2_CTRL__tr_bitnr__BITNR) | \
- (R_SERIAL2_CTRL__data_out__##f19##__VAL(R_SERIAL2_CTRL_, data_out_, v19) << R_SERIAL2_CTRL__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19) ( \
- (R_SERIAL2_CTRL__tr_baud__##f1_##_VAL(R_SERIAL2_CTRL_, tr_baud_, v1) << R_SERIAL2_CTRL__tr_baud__BITNR) | \
- (R_SERIAL2_CTRL__rec_baud__##f2_##_VAL(R_SERIAL2_CTRL_, rec_baud_, v2) << R_SERIAL2_CTRL__rec_baud__BITNR) | \
- (R_SERIAL2_CTRL__dma_err__##f3_##_VAL(R_SERIAL2_CTRL_, dma_err_, v3) << R_SERIAL2_CTRL__dma_err__BITNR) | \
- (R_SERIAL2_CTRL__rec_enable__##f4_##_VAL(R_SERIAL2_CTRL_, rec_enable_, v4) << R_SERIAL2_CTRL__rec_enable__BITNR) | \
- (R_SERIAL2_CTRL__rts___##f5_##_VAL(R_SERIAL2_CTRL_, rts__, v5) << R_SERIAL2_CTRL__rts___BITNR) | \
- (R_SERIAL2_CTRL__sampling__##f6_##_VAL(R_SERIAL2_CTRL_, sampling_, v6) << R_SERIAL2_CTRL__sampling__BITNR) | \
- (R_SERIAL2_CTRL__rec_stick_par__##f7_##_VAL(R_SERIAL2_CTRL_, rec_stick_par_, v7) << R_SERIAL2_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL2_CTRL__rec_par__##f8_##_VAL(R_SERIAL2_CTRL_, rec_par_, v8) << R_SERIAL2_CTRL__rec_par__BITNR) | \
- (R_SERIAL2_CTRL__rec_par_en__##f9_##_VAL(R_SERIAL2_CTRL_, rec_par_en_, v9) << R_SERIAL2_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL2_CTRL__rec_bitnr__##f10_##_VAL(R_SERIAL2_CTRL_, rec_bitnr_, v10) << R_SERIAL2_CTRL__rec_bitnr__BITNR) | \
- (R_SERIAL2_CTRL__txd__##f11_##_VAL(R_SERIAL2_CTRL_, txd_, v11) << R_SERIAL2_CTRL__txd__BITNR) | \
- (R_SERIAL2_CTRL__tr_enable__##f12_##_VAL(R_SERIAL2_CTRL_, tr_enable_, v12) << R_SERIAL2_CTRL__tr_enable__BITNR) | \
- (R_SERIAL2_CTRL__auto_cts__##f13_##_VAL(R_SERIAL2_CTRL_, auto_cts_, v13) << R_SERIAL2_CTRL__auto_cts__BITNR) | \
- (R_SERIAL2_CTRL__stop_bits__##f14_##_VAL(R_SERIAL2_CTRL_, stop_bits_, v14) << R_SERIAL2_CTRL__stop_bits__BITNR) | \
- (R_SERIAL2_CTRL__tr_stick_par__##f15_##_VAL(R_SERIAL2_CTRL_, tr_stick_par_, v15) << R_SERIAL2_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL2_CTRL__tr_par__##f16_##_VAL(R_SERIAL2_CTRL_, tr_par_, v16) << R_SERIAL2_CTRL__tr_par__BITNR) | \
- (R_SERIAL2_CTRL__tr_par_en__##f17_##_VAL(R_SERIAL2_CTRL_, tr_par_en_, v17) << R_SERIAL2_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL2_CTRL__tr_bitnr__##f18_##_VAL(R_SERIAL2_CTRL_, tr_bitnr_, v18) << R_SERIAL2_CTRL__tr_bitnr__BITNR) | \
- (R_SERIAL2_CTRL__data_out__##f19_##_VAL(R_SERIAL2_CTRL_, data_out_, v19) << R_SERIAL2_CTRL__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_READ
- * - type: RO
- * - addr: 0xb0000070
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SERIAL2_READ__xoff_detect__##f1##__MASK & REG__##v1) | \
- (R_SERIAL2_READ__cts___##f2##__MASK & REG__##v2) | \
- (R_SERIAL2_READ__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SERIAL2_READ__rxd__##f4##__MASK & REG__##v4) | \
- (R_SERIAL2_READ__overrun__##f5##__MASK & REG__##v5) | \
- (R_SERIAL2_READ__par_err__##f6##__MASK & REG__##v6) | \
- (R_SERIAL2_READ__framing_err__##f7##__MASK & REG__##v7) | \
- (R_SERIAL2_READ__data_avail__##f8##__MASK & REG__##v8) | \
- (R_SERIAL2_READ__data_in__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SERIAL2_READ__xoff_detect__##f1##__VAL(R_SERIAL2_READ_, xoff_detect_, v1) << R_SERIAL2_READ__xoff_detect__BITNR) | \
- (R_SERIAL2_READ__cts___##f2##__VAL(R_SERIAL2_READ_, cts__, v2) << R_SERIAL2_READ__cts___BITNR) | \
- (R_SERIAL2_READ__tr_ready__##f3##__VAL(R_SERIAL2_READ_, tr_ready_, v3) << R_SERIAL2_READ__tr_ready__BITNR) | \
- (R_SERIAL2_READ__rxd__##f4##__VAL(R_SERIAL2_READ_, rxd_, v4) << R_SERIAL2_READ__rxd__BITNR) | \
- (R_SERIAL2_READ__overrun__##f5##__VAL(R_SERIAL2_READ_, overrun_, v5) << R_SERIAL2_READ__overrun__BITNR) | \
- (R_SERIAL2_READ__par_err__##f6##__VAL(R_SERIAL2_READ_, par_err_, v6) << R_SERIAL2_READ__par_err__BITNR) | \
- (R_SERIAL2_READ__framing_err__##f7##__VAL(R_SERIAL2_READ_, framing_err_, v7) << R_SERIAL2_READ__framing_err__BITNR) | \
- (R_SERIAL2_READ__data_avail__##f8##__VAL(R_SERIAL2_READ_, data_avail_, v8) << R_SERIAL2_READ__data_avail__BITNR) | \
- (R_SERIAL2_READ__data_in__##f9##__VAL(R_SERIAL2_READ_, data_in_, v9) << R_SERIAL2_READ__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_READ_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_SERIAL2_READ__xoff_detect__##f1_##_VAL(R_SERIAL2_READ_, xoff_detect_, v1) << R_SERIAL2_READ__xoff_detect__BITNR) | \
- (R_SERIAL2_READ__cts___##f2_##_VAL(R_SERIAL2_READ_, cts__, v2) << R_SERIAL2_READ__cts___BITNR) | \
- (R_SERIAL2_READ__tr_ready__##f3_##_VAL(R_SERIAL2_READ_, tr_ready_, v3) << R_SERIAL2_READ__tr_ready__BITNR) | \
- (R_SERIAL2_READ__rxd__##f4_##_VAL(R_SERIAL2_READ_, rxd_, v4) << R_SERIAL2_READ__rxd__BITNR) | \
- (R_SERIAL2_READ__overrun__##f5_##_VAL(R_SERIAL2_READ_, overrun_, v5) << R_SERIAL2_READ__overrun__BITNR) | \
- (R_SERIAL2_READ__par_err__##f6_##_VAL(R_SERIAL2_READ_, par_err_, v6) << R_SERIAL2_READ__par_err__BITNR) | \
- (R_SERIAL2_READ__framing_err__##f7_##_VAL(R_SERIAL2_READ_, framing_err_, v7) << R_SERIAL2_READ__framing_err__BITNR) | \
- (R_SERIAL2_READ__data_avail__##f8_##_VAL(R_SERIAL2_READ_, data_avail_, v8) << R_SERIAL2_READ__data_avail__BITNR) | \
- (R_SERIAL2_READ__data_in__##f9_##_VAL(R_SERIAL2_READ_, data_in_, v9) << R_SERIAL2_READ__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_REC_CTRL
- * - type: WO
- * - addr: 0xb0000072
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_REC_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL2_REC_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL2_REC_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL2_REC_CTRL_) \
- REG_VAL__R_SERIAL2_REC_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SERIAL2_REC_CTRL__WRITE(R_SERIAL2_REC_CTRL__ADDR, *R_SERIAL2_REC_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_REC_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_REC_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL2_REC_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_REC_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL2_REC_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL2_REC_CTRL_) \
- REG_VAL__R_SERIAL2_REC_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL2_REC_CTRL__dma_err__##f1##__MASK & REG__##v1) | \
- (R_SERIAL2_REC_CTRL__rec_enable__##f2##__MASK & REG__##v2) | \
- (R_SERIAL2_REC_CTRL__rts___##f3##__MASK & REG__##v3) | \
- (R_SERIAL2_REC_CTRL__sampling__##f4##__MASK & REG__##v4) | \
- (R_SERIAL2_REC_CTRL__rec_stick_par__##f5##__MASK & REG__##v5) | \
- (R_SERIAL2_REC_CTRL__rec_par__##f6##__MASK & REG__##v6) | \
- (R_SERIAL2_REC_CTRL__rec_par_en__##f7##__MASK & REG__##v7) | \
- (R_SERIAL2_REC_CTRL__rec_bitnr__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_REC_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL2_REC_CTRL__dma_err__##f1##__VAL(R_SERIAL2_REC_CTRL_, dma_err_, v1) << R_SERIAL2_REC_CTRL__dma_err__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_enable__##f2##__VAL(R_SERIAL2_REC_CTRL_, rec_enable_, v2) << R_SERIAL2_REC_CTRL__rec_enable__BITNR) | \
- (R_SERIAL2_REC_CTRL__rts___##f3##__VAL(R_SERIAL2_REC_CTRL_, rts__, v3) << R_SERIAL2_REC_CTRL__rts___BITNR) | \
- (R_SERIAL2_REC_CTRL__sampling__##f4##__VAL(R_SERIAL2_REC_CTRL_, sampling_, v4) << R_SERIAL2_REC_CTRL__sampling__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_stick_par__##f5##__VAL(R_SERIAL2_REC_CTRL_, rec_stick_par_, v5) << R_SERIAL2_REC_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_par__##f6##__VAL(R_SERIAL2_REC_CTRL_, rec_par_, v6) << R_SERIAL2_REC_CTRL__rec_par__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_par_en__##f7##__VAL(R_SERIAL2_REC_CTRL_, rec_par_en_, v7) << R_SERIAL2_REC_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_bitnr__##f8##__VAL(R_SERIAL2_REC_CTRL_, rec_bitnr_, v8) << R_SERIAL2_REC_CTRL__rec_bitnr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_REC_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_REC_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_REC_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL2_REC_CTRL__dma_err__##f1_##_VAL(R_SERIAL2_REC_CTRL_, dma_err_, v1) << R_SERIAL2_REC_CTRL__dma_err__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_enable__##f2_##_VAL(R_SERIAL2_REC_CTRL_, rec_enable_, v2) << R_SERIAL2_REC_CTRL__rec_enable__BITNR) | \
- (R_SERIAL2_REC_CTRL__rts___##f3_##_VAL(R_SERIAL2_REC_CTRL_, rts__, v3) << R_SERIAL2_REC_CTRL__rts___BITNR) | \
- (R_SERIAL2_REC_CTRL__sampling__##f4_##_VAL(R_SERIAL2_REC_CTRL_, sampling_, v4) << R_SERIAL2_REC_CTRL__sampling__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_stick_par__##f5_##_VAL(R_SERIAL2_REC_CTRL_, rec_stick_par_, v5) << R_SERIAL2_REC_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_par__##f6_##_VAL(R_SERIAL2_REC_CTRL_, rec_par_, v6) << R_SERIAL2_REC_CTRL__rec_par__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_par_en__##f7_##_VAL(R_SERIAL2_REC_CTRL_, rec_par_en_, v7) << R_SERIAL2_REC_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL2_REC_CTRL__rec_bitnr__##f8_##_VAL(R_SERIAL2_REC_CTRL_, rec_bitnr_, v8) << R_SERIAL2_REC_CTRL__rec_bitnr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_REC_DATA
- * - type: RO
- * - addr: 0xb0000070
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_REC_DATA(f1,v1) ( \
- (R_SERIAL2_REC_DATA__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_REC_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_REC_DATA(f1,v1) ( \
- (R_SERIAL2_REC_DATA__data_in__##f1##__VAL(R_SERIAL2_REC_DATA_, data_in_, v1) << R_SERIAL2_REC_DATA__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_REC_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_REC_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_REC_DATA_(f1_,v1) ( \
- (R_SERIAL2_REC_DATA__data_in__##f1_##_VAL(R_SERIAL2_REC_DATA_, data_in_, v1) << R_SERIAL2_REC_DATA__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_STATUS
- * - type: RO
- * - addr: 0xb0000071
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL2_STATUS__xoff_detect__##f1##__MASK & REG__##v1) | \
- (R_SERIAL2_STATUS__cts___##f2##__MASK & REG__##v2) | \
- (R_SERIAL2_STATUS__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SERIAL2_STATUS__rxd__##f4##__MASK & REG__##v4) | \
- (R_SERIAL2_STATUS__overrun__##f5##__MASK & REG__##v5) | \
- (R_SERIAL2_STATUS__par_err__##f6##__MASK & REG__##v6) | \
- (R_SERIAL2_STATUS__framing_err__##f7##__MASK & REG__##v7) | \
- (R_SERIAL2_STATUS__data_avail__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL2_STATUS__xoff_detect__##f1##__VAL(R_SERIAL2_STATUS_, xoff_detect_, v1) << R_SERIAL2_STATUS__xoff_detect__BITNR) | \
- (R_SERIAL2_STATUS__cts___##f2##__VAL(R_SERIAL2_STATUS_, cts__, v2) << R_SERIAL2_STATUS__cts___BITNR) | \
- (R_SERIAL2_STATUS__tr_ready__##f3##__VAL(R_SERIAL2_STATUS_, tr_ready_, v3) << R_SERIAL2_STATUS__tr_ready__BITNR) | \
- (R_SERIAL2_STATUS__rxd__##f4##__VAL(R_SERIAL2_STATUS_, rxd_, v4) << R_SERIAL2_STATUS__rxd__BITNR) | \
- (R_SERIAL2_STATUS__overrun__##f5##__VAL(R_SERIAL2_STATUS_, overrun_, v5) << R_SERIAL2_STATUS__overrun__BITNR) | \
- (R_SERIAL2_STATUS__par_err__##f6##__VAL(R_SERIAL2_STATUS_, par_err_, v6) << R_SERIAL2_STATUS__par_err__BITNR) | \
- (R_SERIAL2_STATUS__framing_err__##f7##__VAL(R_SERIAL2_STATUS_, framing_err_, v7) << R_SERIAL2_STATUS__framing_err__BITNR) | \
- (R_SERIAL2_STATUS__data_avail__##f8##__VAL(R_SERIAL2_STATUS_, data_avail_, v8) << R_SERIAL2_STATUS__data_avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL2_STATUS__xoff_detect__##f1_##_VAL(R_SERIAL2_STATUS_, xoff_detect_, v1) << R_SERIAL2_STATUS__xoff_detect__BITNR) | \
- (R_SERIAL2_STATUS__cts___##f2_##_VAL(R_SERIAL2_STATUS_, cts__, v2) << R_SERIAL2_STATUS__cts___BITNR) | \
- (R_SERIAL2_STATUS__tr_ready__##f3_##_VAL(R_SERIAL2_STATUS_, tr_ready_, v3) << R_SERIAL2_STATUS__tr_ready__BITNR) | \
- (R_SERIAL2_STATUS__rxd__##f4_##_VAL(R_SERIAL2_STATUS_, rxd_, v4) << R_SERIAL2_STATUS__rxd__BITNR) | \
- (R_SERIAL2_STATUS__overrun__##f5_##_VAL(R_SERIAL2_STATUS_, overrun_, v5) << R_SERIAL2_STATUS__overrun__BITNR) | \
- (R_SERIAL2_STATUS__par_err__##f6_##_VAL(R_SERIAL2_STATUS_, par_err_, v6) << R_SERIAL2_STATUS__par_err__BITNR) | \
- (R_SERIAL2_STATUS__framing_err__##f7_##_VAL(R_SERIAL2_STATUS_, framing_err_, v7) << R_SERIAL2_STATUS__framing_err__BITNR) | \
- (R_SERIAL2_STATUS__data_avail__##f8_##_VAL(R_SERIAL2_STATUS_, data_avail_, v8) << R_SERIAL2_STATUS__data_avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_TR_CTRL
- * - type: WO
- * - addr: 0xb0000071
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL2_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL2_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL2_TR_CTRL_) \
- REG_VAL__R_SERIAL2_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SERIAL2_TR_CTRL__WRITE(R_SERIAL2_TR_CTRL__ADDR, *R_SERIAL2_TR_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_TR_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL2_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_TR_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL2_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL2_TR_CTRL_) \
- REG_VAL__R_SERIAL2_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL2_TR_CTRL__txd__##f1##__MASK & REG__##v1) | \
- (R_SERIAL2_TR_CTRL__tr_enable__##f2##__MASK & REG__##v2) | \
- (R_SERIAL2_TR_CTRL__auto_cts__##f3##__MASK & REG__##v3) | \
- (R_SERIAL2_TR_CTRL__stop_bits__##f4##__MASK & REG__##v4) | \
- (R_SERIAL2_TR_CTRL__tr_stick_par__##f5##__MASK & REG__##v5) | \
- (R_SERIAL2_TR_CTRL__tr_par__##f6##__MASK & REG__##v6) | \
- (R_SERIAL2_TR_CTRL__tr_par_en__##f7##__MASK & REG__##v7) | \
- (R_SERIAL2_TR_CTRL__tr_bitnr__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_TR_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL2_TR_CTRL__txd__##f1##__VAL(R_SERIAL2_TR_CTRL_, txd_, v1) << R_SERIAL2_TR_CTRL__txd__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_enable__##f2##__VAL(R_SERIAL2_TR_CTRL_, tr_enable_, v2) << R_SERIAL2_TR_CTRL__tr_enable__BITNR) | \
- (R_SERIAL2_TR_CTRL__auto_cts__##f3##__VAL(R_SERIAL2_TR_CTRL_, auto_cts_, v3) << R_SERIAL2_TR_CTRL__auto_cts__BITNR) | \
- (R_SERIAL2_TR_CTRL__stop_bits__##f4##__VAL(R_SERIAL2_TR_CTRL_, stop_bits_, v4) << R_SERIAL2_TR_CTRL__stop_bits__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_stick_par__##f5##__VAL(R_SERIAL2_TR_CTRL_, tr_stick_par_, v5) << R_SERIAL2_TR_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_par__##f6##__VAL(R_SERIAL2_TR_CTRL_, tr_par_, v6) << R_SERIAL2_TR_CTRL__tr_par__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_par_en__##f7##__VAL(R_SERIAL2_TR_CTRL_, tr_par_en_, v7) << R_SERIAL2_TR_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_bitnr__##f8##__VAL(R_SERIAL2_TR_CTRL_, tr_bitnr_, v8) << R_SERIAL2_TR_CTRL__tr_bitnr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_TR_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_TR_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_TR_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL2_TR_CTRL__txd__##f1_##_VAL(R_SERIAL2_TR_CTRL_, txd_, v1) << R_SERIAL2_TR_CTRL__txd__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_enable__##f2_##_VAL(R_SERIAL2_TR_CTRL_, tr_enable_, v2) << R_SERIAL2_TR_CTRL__tr_enable__BITNR) | \
- (R_SERIAL2_TR_CTRL__auto_cts__##f3_##_VAL(R_SERIAL2_TR_CTRL_, auto_cts_, v3) << R_SERIAL2_TR_CTRL__auto_cts__BITNR) | \
- (R_SERIAL2_TR_CTRL__stop_bits__##f4_##_VAL(R_SERIAL2_TR_CTRL_, stop_bits_, v4) << R_SERIAL2_TR_CTRL__stop_bits__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_stick_par__##f5_##_VAL(R_SERIAL2_TR_CTRL_, tr_stick_par_, v5) << R_SERIAL2_TR_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_par__##f6_##_VAL(R_SERIAL2_TR_CTRL_, tr_par_, v6) << R_SERIAL2_TR_CTRL__tr_par__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_par_en__##f7_##_VAL(R_SERIAL2_TR_CTRL_, tr_par_en_, v7) << R_SERIAL2_TR_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL2_TR_CTRL__tr_bitnr__##f8_##_VAL(R_SERIAL2_TR_CTRL_, tr_bitnr_, v8) << R_SERIAL2_TR_CTRL__tr_bitnr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_TR_DATA
- * - type: WO
- * - addr: 0xb0000070
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL2_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_TR_DATA(f1,v1) ( \
- *R_SERIAL2_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SERIAL2_TR_DATA_) \
- REG_VAL__R_SERIAL2_TR_DATA_(f1##_,v1) \
- ), \
- R_SERIAL2_TR_DATA__WRITE(R_SERIAL2_TR_DATA__ADDR, *R_SERIAL2_TR_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_TR_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL2_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_TR_DATA__SHADOW(f1,v1) ( \
- *R_SERIAL2_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SERIAL2_TR_DATA_) \
- REG_VAL__R_SERIAL2_TR_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_TR_DATA(f1,v1) ( \
- (R_SERIAL2_TR_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_TR_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_TR_DATA(f1,v1) ( \
- (R_SERIAL2_TR_DATA__data_out__##f1##__VAL(R_SERIAL2_TR_DATA_, data_out_, v1) << R_SERIAL2_TR_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_TR_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_TR_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_TR_DATA_(f1_,v1) ( \
- (R_SERIAL2_TR_DATA__data_out__##f1_##_VAL(R_SERIAL2_TR_DATA_, data_out_, v1) << R_SERIAL2_TR_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL2_XOFF
- * - type: WO
- * - addr: 0xb0000074
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_XOFF.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL2_XOFF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_XOFF(f1,v1,f2,v2,f3,v3) ( \
- *R_SERIAL2_XOFF__SADDR = ( \
- REG_INITIATED(R_SERIAL2_XOFF_) \
- REG_VAL__R_SERIAL2_XOFF_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ), \
- R_SERIAL2_XOFF__WRITE(R_SERIAL2_XOFF__ADDR, *R_SERIAL2_XOFF__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL2_XOFF__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL2_XOFF.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL2_XOFF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL2_XOFF__SHADOW(f1,v1,f2,v2,f3,v3) ( \
- *R_SERIAL2_XOFF__SADDR = ( \
- REG_INITIATED(R_SERIAL2_XOFF_) \
- REG_VAL__R_SERIAL2_XOFF_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL2_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL2_XOFF(f1,v1,f2,v2,f3,v3) ( \
- (R_SERIAL2_XOFF__tx_stop__##f1##__MASK & REG__##v1) | \
- (R_SERIAL2_XOFF__auto_xoff__##f2##__MASK & REG__##v2) | \
- (R_SERIAL2_XOFF__xoff_char__##f3##__MASK & REG__##v3) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_XOFF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_XOFF(f1,v1,f2,v2,f3,v3) ( \
- (R_SERIAL2_XOFF__tx_stop__##f1##__VAL(R_SERIAL2_XOFF_, tx_stop_, v1) << R_SERIAL2_XOFF__tx_stop__BITNR) | \
- (R_SERIAL2_XOFF__auto_xoff__##f2##__VAL(R_SERIAL2_XOFF_, auto_xoff_, v2) << R_SERIAL2_XOFF__auto_xoff__BITNR) | \
- (R_SERIAL2_XOFF__xoff_char__##f3##__VAL(R_SERIAL2_XOFF_, xoff_char_, v3) << R_SERIAL2_XOFF__xoff_char__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL2_XOFF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL2_XOFF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL2_XOFF_(f1_,v1,f2_,v2,f3_,v3) ( \
- (R_SERIAL2_XOFF__tx_stop__##f1_##_VAL(R_SERIAL2_XOFF_, tx_stop_, v1) << R_SERIAL2_XOFF__tx_stop__BITNR) | \
- (R_SERIAL2_XOFF__auto_xoff__##f2_##_VAL(R_SERIAL2_XOFF_, auto_xoff_, v2) << R_SERIAL2_XOFF__auto_xoff__BITNR) | \
- (R_SERIAL2_XOFF__xoff_char__##f3_##_VAL(R_SERIAL2_XOFF_, xoff_char_, v3) << R_SERIAL2_XOFF__xoff_char__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_BAUD
- * - type: WO
- * - addr: 0xb000007b
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_BAUD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL3_BAUD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_BAUD(f1,v1,f2,v2) ( \
- *R_SERIAL3_BAUD__SADDR = ( \
- REG_INITIATED(R_SERIAL3_BAUD_) \
- REG_VAL__R_SERIAL3_BAUD_(f1##_,v1,f2##_,v2) \
- ), \
- R_SERIAL3_BAUD__WRITE(R_SERIAL3_BAUD__ADDR, *R_SERIAL3_BAUD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_BAUD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_BAUD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL3_BAUD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_BAUD__SHADOW(f1,v1,f2,v2) ( \
- *R_SERIAL3_BAUD__SADDR = ( \
- REG_INITIATED(R_SERIAL3_BAUD_) \
- REG_VAL__R_SERIAL3_BAUD_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_BAUD(f1,v1,f2,v2) ( \
- (R_SERIAL3_BAUD__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SERIAL3_BAUD__rec_baud__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_BAUD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_BAUD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_BAUD(f1,v1,f2,v2) ( \
- (R_SERIAL3_BAUD__tr_baud__##f1##__VAL(R_SERIAL3_BAUD_, tr_baud_, v1) << R_SERIAL3_BAUD__tr_baud__BITNR) | \
- (R_SERIAL3_BAUD__rec_baud__##f2##__VAL(R_SERIAL3_BAUD_, rec_baud_, v2) << R_SERIAL3_BAUD__rec_baud__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_BAUD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_BAUD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_BAUD_(f1_,v1,f2_,v2) ( \
- (R_SERIAL3_BAUD__tr_baud__##f1_##_VAL(R_SERIAL3_BAUD_, tr_baud_, v1) << R_SERIAL3_BAUD__tr_baud__BITNR) | \
- (R_SERIAL3_BAUD__rec_baud__##f2_##_VAL(R_SERIAL3_BAUD_, rec_baud_, v2) << R_SERIAL3_BAUD__rec_baud__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_CTRL
- * - type: WO
- * - addr: 0xb0000078
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL3_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_SERIAL3_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL3_CTRL_) \
- REG_VAL__R_SERIAL3_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ), \
- R_SERIAL3_CTRL__WRITE(R_SERIAL3_CTRL__ADDR, *R_SERIAL3_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL3_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- *R_SERIAL3_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL3_CTRL_) \
- REG_VAL__R_SERIAL3_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_SERIAL3_CTRL__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SERIAL3_CTRL__rec_baud__##f2##__MASK & REG__##v2) | \
- (R_SERIAL3_CTRL__dma_err__##f3##__MASK & REG__##v3) | \
- (R_SERIAL3_CTRL__rec_enable__##f4##__MASK & REG__##v4) | \
- (R_SERIAL3_CTRL__rts___##f5##__MASK & REG__##v5) | \
- (R_SERIAL3_CTRL__sampling__##f6##__MASK & REG__##v6) | \
- (R_SERIAL3_CTRL__rec_stick_par__##f7##__MASK & REG__##v7) | \
- (R_SERIAL3_CTRL__rec_par__##f8##__MASK & REG__##v8) | \
- (R_SERIAL3_CTRL__rec_par_en__##f9##__MASK & REG__##v9) | \
- (R_SERIAL3_CTRL__rec_bitnr__##f10##__MASK & REG__##v10) | \
- (R_SERIAL3_CTRL__txd__##f11##__MASK & REG__##v11) | \
- (R_SERIAL3_CTRL__tr_enable__##f12##__MASK & REG__##v12) | \
- (R_SERIAL3_CTRL__auto_cts__##f13##__MASK & REG__##v13) | \
- (R_SERIAL3_CTRL__stop_bits__##f14##__MASK & REG__##v14) | \
- (R_SERIAL3_CTRL__tr_stick_par__##f15##__MASK & REG__##v15) | \
- (R_SERIAL3_CTRL__tr_par__##f16##__MASK & REG__##v16) | \
- (R_SERIAL3_CTRL__tr_par_en__##f17##__MASK & REG__##v17) | \
- (R_SERIAL3_CTRL__tr_bitnr__##f18##__MASK & REG__##v18) | \
- (R_SERIAL3_CTRL__data_out__##f19##__MASK & REG__##v19) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19) ( \
- (R_SERIAL3_CTRL__tr_baud__##f1##__VAL(R_SERIAL3_CTRL_, tr_baud_, v1) << R_SERIAL3_CTRL__tr_baud__BITNR) | \
- (R_SERIAL3_CTRL__rec_baud__##f2##__VAL(R_SERIAL3_CTRL_, rec_baud_, v2) << R_SERIAL3_CTRL__rec_baud__BITNR) | \
- (R_SERIAL3_CTRL__dma_err__##f3##__VAL(R_SERIAL3_CTRL_, dma_err_, v3) << R_SERIAL3_CTRL__dma_err__BITNR) | \
- (R_SERIAL3_CTRL__rec_enable__##f4##__VAL(R_SERIAL3_CTRL_, rec_enable_, v4) << R_SERIAL3_CTRL__rec_enable__BITNR) | \
- (R_SERIAL3_CTRL__rts___##f5##__VAL(R_SERIAL3_CTRL_, rts__, v5) << R_SERIAL3_CTRL__rts___BITNR) | \
- (R_SERIAL3_CTRL__sampling__##f6##__VAL(R_SERIAL3_CTRL_, sampling_, v6) << R_SERIAL3_CTRL__sampling__BITNR) | \
- (R_SERIAL3_CTRL__rec_stick_par__##f7##__VAL(R_SERIAL3_CTRL_, rec_stick_par_, v7) << R_SERIAL3_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL3_CTRL__rec_par__##f8##__VAL(R_SERIAL3_CTRL_, rec_par_, v8) << R_SERIAL3_CTRL__rec_par__BITNR) | \
- (R_SERIAL3_CTRL__rec_par_en__##f9##__VAL(R_SERIAL3_CTRL_, rec_par_en_, v9) << R_SERIAL3_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL3_CTRL__rec_bitnr__##f10##__VAL(R_SERIAL3_CTRL_, rec_bitnr_, v10) << R_SERIAL3_CTRL__rec_bitnr__BITNR) | \
- (R_SERIAL3_CTRL__txd__##f11##__VAL(R_SERIAL3_CTRL_, txd_, v11) << R_SERIAL3_CTRL__txd__BITNR) | \
- (R_SERIAL3_CTRL__tr_enable__##f12##__VAL(R_SERIAL3_CTRL_, tr_enable_, v12) << R_SERIAL3_CTRL__tr_enable__BITNR) | \
- (R_SERIAL3_CTRL__auto_cts__##f13##__VAL(R_SERIAL3_CTRL_, auto_cts_, v13) << R_SERIAL3_CTRL__auto_cts__BITNR) | \
- (R_SERIAL3_CTRL__stop_bits__##f14##__VAL(R_SERIAL3_CTRL_, stop_bits_, v14) << R_SERIAL3_CTRL__stop_bits__BITNR) | \
- (R_SERIAL3_CTRL__tr_stick_par__##f15##__VAL(R_SERIAL3_CTRL_, tr_stick_par_, v15) << R_SERIAL3_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL3_CTRL__tr_par__##f16##__VAL(R_SERIAL3_CTRL_, tr_par_, v16) << R_SERIAL3_CTRL__tr_par__BITNR) | \
- (R_SERIAL3_CTRL__tr_par_en__##f17##__VAL(R_SERIAL3_CTRL_, tr_par_en_, v17) << R_SERIAL3_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL3_CTRL__tr_bitnr__##f18##__VAL(R_SERIAL3_CTRL_, tr_bitnr_, v18) << R_SERIAL3_CTRL__tr_bitnr__BITNR) | \
- (R_SERIAL3_CTRL__data_out__##f19##__VAL(R_SERIAL3_CTRL_, data_out_, v19) << R_SERIAL3_CTRL__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19) ( \
- (R_SERIAL3_CTRL__tr_baud__##f1_##_VAL(R_SERIAL3_CTRL_, tr_baud_, v1) << R_SERIAL3_CTRL__tr_baud__BITNR) | \
- (R_SERIAL3_CTRL__rec_baud__##f2_##_VAL(R_SERIAL3_CTRL_, rec_baud_, v2) << R_SERIAL3_CTRL__rec_baud__BITNR) | \
- (R_SERIAL3_CTRL__dma_err__##f3_##_VAL(R_SERIAL3_CTRL_, dma_err_, v3) << R_SERIAL3_CTRL__dma_err__BITNR) | \
- (R_SERIAL3_CTRL__rec_enable__##f4_##_VAL(R_SERIAL3_CTRL_, rec_enable_, v4) << R_SERIAL3_CTRL__rec_enable__BITNR) | \
- (R_SERIAL3_CTRL__rts___##f5_##_VAL(R_SERIAL3_CTRL_, rts__, v5) << R_SERIAL3_CTRL__rts___BITNR) | \
- (R_SERIAL3_CTRL__sampling__##f6_##_VAL(R_SERIAL3_CTRL_, sampling_, v6) << R_SERIAL3_CTRL__sampling__BITNR) | \
- (R_SERIAL3_CTRL__rec_stick_par__##f7_##_VAL(R_SERIAL3_CTRL_, rec_stick_par_, v7) << R_SERIAL3_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL3_CTRL__rec_par__##f8_##_VAL(R_SERIAL3_CTRL_, rec_par_, v8) << R_SERIAL3_CTRL__rec_par__BITNR) | \
- (R_SERIAL3_CTRL__rec_par_en__##f9_##_VAL(R_SERIAL3_CTRL_, rec_par_en_, v9) << R_SERIAL3_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL3_CTRL__rec_bitnr__##f10_##_VAL(R_SERIAL3_CTRL_, rec_bitnr_, v10) << R_SERIAL3_CTRL__rec_bitnr__BITNR) | \
- (R_SERIAL3_CTRL__txd__##f11_##_VAL(R_SERIAL3_CTRL_, txd_, v11) << R_SERIAL3_CTRL__txd__BITNR) | \
- (R_SERIAL3_CTRL__tr_enable__##f12_##_VAL(R_SERIAL3_CTRL_, tr_enable_, v12) << R_SERIAL3_CTRL__tr_enable__BITNR) | \
- (R_SERIAL3_CTRL__auto_cts__##f13_##_VAL(R_SERIAL3_CTRL_, auto_cts_, v13) << R_SERIAL3_CTRL__auto_cts__BITNR) | \
- (R_SERIAL3_CTRL__stop_bits__##f14_##_VAL(R_SERIAL3_CTRL_, stop_bits_, v14) << R_SERIAL3_CTRL__stop_bits__BITNR) | \
- (R_SERIAL3_CTRL__tr_stick_par__##f15_##_VAL(R_SERIAL3_CTRL_, tr_stick_par_, v15) << R_SERIAL3_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL3_CTRL__tr_par__##f16_##_VAL(R_SERIAL3_CTRL_, tr_par_, v16) << R_SERIAL3_CTRL__tr_par__BITNR) | \
- (R_SERIAL3_CTRL__tr_par_en__##f17_##_VAL(R_SERIAL3_CTRL_, tr_par_en_, v17) << R_SERIAL3_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL3_CTRL__tr_bitnr__##f18_##_VAL(R_SERIAL3_CTRL_, tr_bitnr_, v18) << R_SERIAL3_CTRL__tr_bitnr__BITNR) | \
- (R_SERIAL3_CTRL__data_out__##f19_##_VAL(R_SERIAL3_CTRL_, data_out_, v19) << R_SERIAL3_CTRL__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_READ
- * - type: RO
- * - addr: 0xb0000078
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SERIAL3_READ__xoff_detect__##f1##__MASK & REG__##v1) | \
- (R_SERIAL3_READ__cts___##f2##__MASK & REG__##v2) | \
- (R_SERIAL3_READ__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SERIAL3_READ__rxd__##f4##__MASK & REG__##v4) | \
- (R_SERIAL3_READ__overrun__##f5##__MASK & REG__##v5) | \
- (R_SERIAL3_READ__par_err__##f6##__MASK & REG__##v6) | \
- (R_SERIAL3_READ__framing_err__##f7##__MASK & REG__##v7) | \
- (R_SERIAL3_READ__data_avail__##f8##__MASK & REG__##v8) | \
- (R_SERIAL3_READ__data_in__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SERIAL3_READ__xoff_detect__##f1##__VAL(R_SERIAL3_READ_, xoff_detect_, v1) << R_SERIAL3_READ__xoff_detect__BITNR) | \
- (R_SERIAL3_READ__cts___##f2##__VAL(R_SERIAL3_READ_, cts__, v2) << R_SERIAL3_READ__cts___BITNR) | \
- (R_SERIAL3_READ__tr_ready__##f3##__VAL(R_SERIAL3_READ_, tr_ready_, v3) << R_SERIAL3_READ__tr_ready__BITNR) | \
- (R_SERIAL3_READ__rxd__##f4##__VAL(R_SERIAL3_READ_, rxd_, v4) << R_SERIAL3_READ__rxd__BITNR) | \
- (R_SERIAL3_READ__overrun__##f5##__VAL(R_SERIAL3_READ_, overrun_, v5) << R_SERIAL3_READ__overrun__BITNR) | \
- (R_SERIAL3_READ__par_err__##f6##__VAL(R_SERIAL3_READ_, par_err_, v6) << R_SERIAL3_READ__par_err__BITNR) | \
- (R_SERIAL3_READ__framing_err__##f7##__VAL(R_SERIAL3_READ_, framing_err_, v7) << R_SERIAL3_READ__framing_err__BITNR) | \
- (R_SERIAL3_READ__data_avail__##f8##__VAL(R_SERIAL3_READ_, data_avail_, v8) << R_SERIAL3_READ__data_avail__BITNR) | \
- (R_SERIAL3_READ__data_in__##f9##__VAL(R_SERIAL3_READ_, data_in_, v9) << R_SERIAL3_READ__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_READ_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_SERIAL3_READ__xoff_detect__##f1_##_VAL(R_SERIAL3_READ_, xoff_detect_, v1) << R_SERIAL3_READ__xoff_detect__BITNR) | \
- (R_SERIAL3_READ__cts___##f2_##_VAL(R_SERIAL3_READ_, cts__, v2) << R_SERIAL3_READ__cts___BITNR) | \
- (R_SERIAL3_READ__tr_ready__##f3_##_VAL(R_SERIAL3_READ_, tr_ready_, v3) << R_SERIAL3_READ__tr_ready__BITNR) | \
- (R_SERIAL3_READ__rxd__##f4_##_VAL(R_SERIAL3_READ_, rxd_, v4) << R_SERIAL3_READ__rxd__BITNR) | \
- (R_SERIAL3_READ__overrun__##f5_##_VAL(R_SERIAL3_READ_, overrun_, v5) << R_SERIAL3_READ__overrun__BITNR) | \
- (R_SERIAL3_READ__par_err__##f6_##_VAL(R_SERIAL3_READ_, par_err_, v6) << R_SERIAL3_READ__par_err__BITNR) | \
- (R_SERIAL3_READ__framing_err__##f7_##_VAL(R_SERIAL3_READ_, framing_err_, v7) << R_SERIAL3_READ__framing_err__BITNR) | \
- (R_SERIAL3_READ__data_avail__##f8_##_VAL(R_SERIAL3_READ_, data_avail_, v8) << R_SERIAL3_READ__data_avail__BITNR) | \
- (R_SERIAL3_READ__data_in__##f9_##_VAL(R_SERIAL3_READ_, data_in_, v9) << R_SERIAL3_READ__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_REC_CTRL
- * - type: WO
- * - addr: 0xb000007a
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_REC_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL3_REC_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL3_REC_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL3_REC_CTRL_) \
- REG_VAL__R_SERIAL3_REC_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SERIAL3_REC_CTRL__WRITE(R_SERIAL3_REC_CTRL__ADDR, *R_SERIAL3_REC_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_REC_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_REC_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL3_REC_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_REC_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL3_REC_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL3_REC_CTRL_) \
- REG_VAL__R_SERIAL3_REC_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL3_REC_CTRL__dma_err__##f1##__MASK & REG__##v1) | \
- (R_SERIAL3_REC_CTRL__rec_enable__##f2##__MASK & REG__##v2) | \
- (R_SERIAL3_REC_CTRL__rts___##f3##__MASK & REG__##v3) | \
- (R_SERIAL3_REC_CTRL__sampling__##f4##__MASK & REG__##v4) | \
- (R_SERIAL3_REC_CTRL__rec_stick_par__##f5##__MASK & REG__##v5) | \
- (R_SERIAL3_REC_CTRL__rec_par__##f6##__MASK & REG__##v6) | \
- (R_SERIAL3_REC_CTRL__rec_par_en__##f7##__MASK & REG__##v7) | \
- (R_SERIAL3_REC_CTRL__rec_bitnr__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_REC_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_REC_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_REC_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL3_REC_CTRL__dma_err__##f1##__VAL(R_SERIAL3_REC_CTRL_, dma_err_, v1) << R_SERIAL3_REC_CTRL__dma_err__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_enable__##f2##__VAL(R_SERIAL3_REC_CTRL_, rec_enable_, v2) << R_SERIAL3_REC_CTRL__rec_enable__BITNR) | \
- (R_SERIAL3_REC_CTRL__rts___##f3##__VAL(R_SERIAL3_REC_CTRL_, rts__, v3) << R_SERIAL3_REC_CTRL__rts___BITNR) | \
- (R_SERIAL3_REC_CTRL__sampling__##f4##__VAL(R_SERIAL3_REC_CTRL_, sampling_, v4) << R_SERIAL3_REC_CTRL__sampling__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_stick_par__##f5##__VAL(R_SERIAL3_REC_CTRL_, rec_stick_par_, v5) << R_SERIAL3_REC_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_par__##f6##__VAL(R_SERIAL3_REC_CTRL_, rec_par_, v6) << R_SERIAL3_REC_CTRL__rec_par__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_par_en__##f7##__VAL(R_SERIAL3_REC_CTRL_, rec_par_en_, v7) << R_SERIAL3_REC_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_bitnr__##f8##__VAL(R_SERIAL3_REC_CTRL_, rec_bitnr_, v8) << R_SERIAL3_REC_CTRL__rec_bitnr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_REC_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_REC_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_REC_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL3_REC_CTRL__dma_err__##f1_##_VAL(R_SERIAL3_REC_CTRL_, dma_err_, v1) << R_SERIAL3_REC_CTRL__dma_err__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_enable__##f2_##_VAL(R_SERIAL3_REC_CTRL_, rec_enable_, v2) << R_SERIAL3_REC_CTRL__rec_enable__BITNR) | \
- (R_SERIAL3_REC_CTRL__rts___##f3_##_VAL(R_SERIAL3_REC_CTRL_, rts__, v3) << R_SERIAL3_REC_CTRL__rts___BITNR) | \
- (R_SERIAL3_REC_CTRL__sampling__##f4_##_VAL(R_SERIAL3_REC_CTRL_, sampling_, v4) << R_SERIAL3_REC_CTRL__sampling__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_stick_par__##f5_##_VAL(R_SERIAL3_REC_CTRL_, rec_stick_par_, v5) << R_SERIAL3_REC_CTRL__rec_stick_par__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_par__##f6_##_VAL(R_SERIAL3_REC_CTRL_, rec_par_, v6) << R_SERIAL3_REC_CTRL__rec_par__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_par_en__##f7_##_VAL(R_SERIAL3_REC_CTRL_, rec_par_en_, v7) << R_SERIAL3_REC_CTRL__rec_par_en__BITNR) | \
- (R_SERIAL3_REC_CTRL__rec_bitnr__##f8_##_VAL(R_SERIAL3_REC_CTRL_, rec_bitnr_, v8) << R_SERIAL3_REC_CTRL__rec_bitnr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_REC_DATA
- * - type: RO
- * - addr: 0xb0000078
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_REC_DATA(f1,v1) ( \
- (R_SERIAL3_REC_DATA__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_REC_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_REC_DATA(f1,v1) ( \
- (R_SERIAL3_REC_DATA__data_in__##f1##__VAL(R_SERIAL3_REC_DATA_, data_in_, v1) << R_SERIAL3_REC_DATA__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_REC_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_REC_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_REC_DATA_(f1_,v1) ( \
- (R_SERIAL3_REC_DATA__data_in__##f1_##_VAL(R_SERIAL3_REC_DATA_, data_in_, v1) << R_SERIAL3_REC_DATA__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_STATUS
- * - type: RO
- * - addr: 0xb0000079
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL3_STATUS__xoff_detect__##f1##__MASK & REG__##v1) | \
- (R_SERIAL3_STATUS__cts___##f2##__MASK & REG__##v2) | \
- (R_SERIAL3_STATUS__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SERIAL3_STATUS__rxd__##f4##__MASK & REG__##v4) | \
- (R_SERIAL3_STATUS__overrun__##f5##__MASK & REG__##v5) | \
- (R_SERIAL3_STATUS__par_err__##f6##__MASK & REG__##v6) | \
- (R_SERIAL3_STATUS__framing_err__##f7##__MASK & REG__##v7) | \
- (R_SERIAL3_STATUS__data_avail__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL3_STATUS__xoff_detect__##f1##__VAL(R_SERIAL3_STATUS_, xoff_detect_, v1) << R_SERIAL3_STATUS__xoff_detect__BITNR) | \
- (R_SERIAL3_STATUS__cts___##f2##__VAL(R_SERIAL3_STATUS_, cts__, v2) << R_SERIAL3_STATUS__cts___BITNR) | \
- (R_SERIAL3_STATUS__tr_ready__##f3##__VAL(R_SERIAL3_STATUS_, tr_ready_, v3) << R_SERIAL3_STATUS__tr_ready__BITNR) | \
- (R_SERIAL3_STATUS__rxd__##f4##__VAL(R_SERIAL3_STATUS_, rxd_, v4) << R_SERIAL3_STATUS__rxd__BITNR) | \
- (R_SERIAL3_STATUS__overrun__##f5##__VAL(R_SERIAL3_STATUS_, overrun_, v5) << R_SERIAL3_STATUS__overrun__BITNR) | \
- (R_SERIAL3_STATUS__par_err__##f6##__VAL(R_SERIAL3_STATUS_, par_err_, v6) << R_SERIAL3_STATUS__par_err__BITNR) | \
- (R_SERIAL3_STATUS__framing_err__##f7##__VAL(R_SERIAL3_STATUS_, framing_err_, v7) << R_SERIAL3_STATUS__framing_err__BITNR) | \
- (R_SERIAL3_STATUS__data_avail__##f8##__VAL(R_SERIAL3_STATUS_, data_avail_, v8) << R_SERIAL3_STATUS__data_avail__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL3_STATUS__xoff_detect__##f1_##_VAL(R_SERIAL3_STATUS_, xoff_detect_, v1) << R_SERIAL3_STATUS__xoff_detect__BITNR) | \
- (R_SERIAL3_STATUS__cts___##f2_##_VAL(R_SERIAL3_STATUS_, cts__, v2) << R_SERIAL3_STATUS__cts___BITNR) | \
- (R_SERIAL3_STATUS__tr_ready__##f3_##_VAL(R_SERIAL3_STATUS_, tr_ready_, v3) << R_SERIAL3_STATUS__tr_ready__BITNR) | \
- (R_SERIAL3_STATUS__rxd__##f4_##_VAL(R_SERIAL3_STATUS_, rxd_, v4) << R_SERIAL3_STATUS__rxd__BITNR) | \
- (R_SERIAL3_STATUS__overrun__##f5_##_VAL(R_SERIAL3_STATUS_, overrun_, v5) << R_SERIAL3_STATUS__overrun__BITNR) | \
- (R_SERIAL3_STATUS__par_err__##f6_##_VAL(R_SERIAL3_STATUS_, par_err_, v6) << R_SERIAL3_STATUS__par_err__BITNR) | \
- (R_SERIAL3_STATUS__framing_err__##f7_##_VAL(R_SERIAL3_STATUS_, framing_err_, v7) << R_SERIAL3_STATUS__framing_err__BITNR) | \
- (R_SERIAL3_STATUS__data_avail__##f8_##_VAL(R_SERIAL3_STATUS_, data_avail_, v8) << R_SERIAL3_STATUS__data_avail__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_TR_CTRL
- * - type: WO
- * - addr: 0xb0000079
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL3_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL3_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL3_TR_CTRL_) \
- REG_VAL__R_SERIAL3_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SERIAL3_TR_CTRL__WRITE(R_SERIAL3_TR_CTRL__ADDR, *R_SERIAL3_TR_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_TR_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_TR_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL3_TR_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_TR_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SERIAL3_TR_CTRL__SADDR = ( \
- REG_INITIATED(R_SERIAL3_TR_CTRL_) \
- REG_VAL__R_SERIAL3_TR_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL3_TR_CTRL__txd__##f1##__MASK & REG__##v1) | \
- (R_SERIAL3_TR_CTRL__tr_enable__##f2##__MASK & REG__##v2) | \
- (R_SERIAL3_TR_CTRL__auto_cts__##f3##__MASK & REG__##v3) | \
- (R_SERIAL3_TR_CTRL__stop_bits__##f4##__MASK & REG__##v4) | \
- (R_SERIAL3_TR_CTRL__tr_stick_par__##f5##__MASK & REG__##v5) | \
- (R_SERIAL3_TR_CTRL__tr_par__##f6##__MASK & REG__##v6) | \
- (R_SERIAL3_TR_CTRL__tr_par_en__##f7##__MASK & REG__##v7) | \
- (R_SERIAL3_TR_CTRL__tr_bitnr__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_TR_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_TR_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_TR_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SERIAL3_TR_CTRL__txd__##f1##__VAL(R_SERIAL3_TR_CTRL_, txd_, v1) << R_SERIAL3_TR_CTRL__txd__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_enable__##f2##__VAL(R_SERIAL3_TR_CTRL_, tr_enable_, v2) << R_SERIAL3_TR_CTRL__tr_enable__BITNR) | \
- (R_SERIAL3_TR_CTRL__auto_cts__##f3##__VAL(R_SERIAL3_TR_CTRL_, auto_cts_, v3) << R_SERIAL3_TR_CTRL__auto_cts__BITNR) | \
- (R_SERIAL3_TR_CTRL__stop_bits__##f4##__VAL(R_SERIAL3_TR_CTRL_, stop_bits_, v4) << R_SERIAL3_TR_CTRL__stop_bits__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_stick_par__##f5##__VAL(R_SERIAL3_TR_CTRL_, tr_stick_par_, v5) << R_SERIAL3_TR_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_par__##f6##__VAL(R_SERIAL3_TR_CTRL_, tr_par_, v6) << R_SERIAL3_TR_CTRL__tr_par__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_par_en__##f7##__VAL(R_SERIAL3_TR_CTRL_, tr_par_en_, v7) << R_SERIAL3_TR_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_bitnr__##f8##__VAL(R_SERIAL3_TR_CTRL_, tr_bitnr_, v8) << R_SERIAL3_TR_CTRL__tr_bitnr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_TR_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_TR_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_TR_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SERIAL3_TR_CTRL__txd__##f1_##_VAL(R_SERIAL3_TR_CTRL_, txd_, v1) << R_SERIAL3_TR_CTRL__txd__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_enable__##f2_##_VAL(R_SERIAL3_TR_CTRL_, tr_enable_, v2) << R_SERIAL3_TR_CTRL__tr_enable__BITNR) | \
- (R_SERIAL3_TR_CTRL__auto_cts__##f3_##_VAL(R_SERIAL3_TR_CTRL_, auto_cts_, v3) << R_SERIAL3_TR_CTRL__auto_cts__BITNR) | \
- (R_SERIAL3_TR_CTRL__stop_bits__##f4_##_VAL(R_SERIAL3_TR_CTRL_, stop_bits_, v4) << R_SERIAL3_TR_CTRL__stop_bits__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_stick_par__##f5_##_VAL(R_SERIAL3_TR_CTRL_, tr_stick_par_, v5) << R_SERIAL3_TR_CTRL__tr_stick_par__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_par__##f6_##_VAL(R_SERIAL3_TR_CTRL_, tr_par_, v6) << R_SERIAL3_TR_CTRL__tr_par__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_par_en__##f7_##_VAL(R_SERIAL3_TR_CTRL_, tr_par_en_, v7) << R_SERIAL3_TR_CTRL__tr_par_en__BITNR) | \
- (R_SERIAL3_TR_CTRL__tr_bitnr__##f8_##_VAL(R_SERIAL3_TR_CTRL_, tr_bitnr_, v8) << R_SERIAL3_TR_CTRL__tr_bitnr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_TR_DATA
- * - type: WO
- * - addr: 0xb0000078
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL3_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_TR_DATA(f1,v1) ( \
- *R_SERIAL3_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SERIAL3_TR_DATA_) \
- REG_VAL__R_SERIAL3_TR_DATA_(f1##_,v1) \
- ), \
- R_SERIAL3_TR_DATA__WRITE(R_SERIAL3_TR_DATA__ADDR, *R_SERIAL3_TR_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_TR_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL3_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_TR_DATA__SHADOW(f1,v1) ( \
- *R_SERIAL3_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SERIAL3_TR_DATA_) \
- REG_VAL__R_SERIAL3_TR_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_TR_DATA(f1,v1) ( \
- (R_SERIAL3_TR_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_TR_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_TR_DATA(f1,v1) ( \
- (R_SERIAL3_TR_DATA__data_out__##f1##__VAL(R_SERIAL3_TR_DATA_, data_out_, v1) << R_SERIAL3_TR_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_TR_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_TR_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_TR_DATA_(f1_,v1) ( \
- (R_SERIAL3_TR_DATA__data_out__##f1_##_VAL(R_SERIAL3_TR_DATA_, data_out_, v1) << R_SERIAL3_TR_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL3_XOFF
- * - type: WO
- * - addr: 0xb000007c
- * - group: Serial port registers
- */
-
-#if USE_GROUP__Serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_XOFF.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL3_XOFF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_XOFF(f1,v1,f2,v2,f3,v3) ( \
- *R_SERIAL3_XOFF__SADDR = ( \
- REG_INITIATED(R_SERIAL3_XOFF_) \
- REG_VAL__R_SERIAL3_XOFF_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ), \
- R_SERIAL3_XOFF__WRITE(R_SERIAL3_XOFF__ADDR, *R_SERIAL3_XOFF__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL3_XOFF__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL3_XOFF.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL3_XOFF.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL3_XOFF__SHADOW(f1,v1,f2,v2,f3,v3) ( \
- *R_SERIAL3_XOFF__SADDR = ( \
- REG_INITIATED(R_SERIAL3_XOFF_) \
- REG_VAL__R_SERIAL3_XOFF_(f1##_,v1,f2##_,v2,f3##_,v3) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL3_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL3_XOFF(f1,v1,f2,v2,f3,v3) ( \
- (R_SERIAL3_XOFF__tx_stop__##f1##__MASK & REG__##v1) | \
- (R_SERIAL3_XOFF__auto_xoff__##f2##__MASK & REG__##v2) | \
- (R_SERIAL3_XOFF__xoff_char__##f3##__MASK & REG__##v3) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_XOFF
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_XOFF.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_XOFF(f1,v1,f2,v2,f3,v3) ( \
- (R_SERIAL3_XOFF__tx_stop__##f1##__VAL(R_SERIAL3_XOFF_, tx_stop_, v1) << R_SERIAL3_XOFF__tx_stop__BITNR) | \
- (R_SERIAL3_XOFF__auto_xoff__##f2##__VAL(R_SERIAL3_XOFF_, auto_xoff_, v2) << R_SERIAL3_XOFF__auto_xoff__BITNR) | \
- (R_SERIAL3_XOFF__xoff_char__##f3##__VAL(R_SERIAL3_XOFF_, xoff_char_, v3) << R_SERIAL3_XOFF__xoff_char__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL3_XOFF_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL3_XOFF.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL3_XOFF_(f1_,v1,f2_,v2,f3_,v3) ( \
- (R_SERIAL3_XOFF__tx_stop__##f1_##_VAL(R_SERIAL3_XOFF_, tx_stop_, v1) << R_SERIAL3_XOFF__tx_stop__BITNR) | \
- (R_SERIAL3_XOFF__auto_xoff__##f2_##_VAL(R_SERIAL3_XOFF_, auto_xoff_, v2) << R_SERIAL3_XOFF__auto_xoff__BITNR) | \
- (R_SERIAL3_XOFF__xoff_char__##f3_##_VAL(R_SERIAL3_XOFF_, xoff_char_, v3) << R_SERIAL3_XOFF__xoff_char__BITNR) \
-)
-
-#endif
-
-/*
- * R_SERIAL_PRESCALE
- * - type: WO
- * - addr: 0xb00000f2
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL_PRESCALE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SERIAL_PRESCALE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL_PRESCALE(f1,v1) ( \
- *R_SERIAL_PRESCALE__SADDR = ( \
- REG_INITIATED(R_SERIAL_PRESCALE_) \
- REG_VAL__R_SERIAL_PRESCALE_(f1##_,v1) \
- ), \
- R_SERIAL_PRESCALE__WRITE(R_SERIAL_PRESCALE__ADDR, *R_SERIAL_PRESCALE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SERIAL_PRESCALE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SERIAL_PRESCALE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SERIAL_PRESCALE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SERIAL_PRESCALE__SHADOW(f1,v1) ( \
- *R_SERIAL_PRESCALE__SADDR = ( \
- REG_INITIATED(R_SERIAL_PRESCALE_) \
- REG_VAL__R_SERIAL_PRESCALE_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SERIAL_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SERIAL_PRESCALE(f1,v1) ( \
- (R_SERIAL_PRESCALE__ser_presc__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL_PRESCALE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL_PRESCALE(f1,v1) ( \
- (R_SERIAL_PRESCALE__ser_presc__##f1##__VAL(R_SERIAL_PRESCALE_, ser_presc_, v1) << R_SERIAL_PRESCALE__ser_presc__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SERIAL_PRESCALE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SERIAL_PRESCALE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SERIAL_PRESCALE_(f1_,v1) ( \
- (R_SERIAL_PRESCALE__ser_presc__##f1_##_VAL(R_SERIAL_PRESCALE_, ser_presc_, v1) << R_SERIAL_PRESCALE__ser_presc__BITNR) \
-)
-
-#endif
-
-/*
- * R_SER_PRESC_STATUS
- * - type: RO
- * - addr: 0xb00000f2
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SER_PRESC_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SER_PRESC_STATUS(f1,v1) ( \
- (R_SER_PRESC_STATUS__ser_status__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SER_PRESC_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SER_PRESC_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SER_PRESC_STATUS(f1,v1) ( \
- (R_SER_PRESC_STATUS__ser_status__##f1##__VAL(R_SER_PRESC_STATUS_, ser_status_, v1) << R_SER_PRESC_STATUS__ser_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SER_PRESC_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SER_PRESC_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SER_PRESC_STATUS_(f1_,v1) ( \
- (R_SER_PRESC_STATUS__ser_status__##f1_##_VAL(R_SER_PRESC_STATUS_, ser_status_, v1) << R_SER_PRESC_STATUS__ser_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_SET_EOP
- * - type: WO
- * - addr: 0xb000003c
- * - group: DMA registers
- */
-
-#if USE_GROUP__DMA_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SET_EOP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SET_EOP.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SET_EOP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SET_EOP(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- *R_SET_EOP__SADDR = ( \
- REG_INITIATED(R_SET_EOP_) \
- REG_VAL__R_SET_EOP_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4) \
- ), \
- R_SET_EOP__WRITE(R_SET_EOP__ADDR, *R_SET_EOP__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SET_EOP__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SET_EOP.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SET_EOP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SET_EOP__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- *R_SET_EOP__SADDR = ( \
- REG_INITIATED(R_SET_EOP_) \
- REG_VAL__R_SET_EOP_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SET_EOP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SET_EOP(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_SET_EOP__ch9_eop__##f1##__MASK & REG__##v1) | \
- (R_SET_EOP__ch7_eop__##f2##__MASK & REG__##v2) | \
- (R_SET_EOP__ch5_eop__##f3##__MASK & REG__##v3) | \
- (R_SET_EOP__ch3_eop__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SET_EOP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SET_EOP.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SET_EOP(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_SET_EOP__ch9_eop__##f1##__VAL(R_SET_EOP_, ch9_eop_, v1) << R_SET_EOP__ch9_eop__BITNR) | \
- (R_SET_EOP__ch7_eop__##f2##__VAL(R_SET_EOP_, ch7_eop_, v2) << R_SET_EOP__ch7_eop__BITNR) | \
- (R_SET_EOP__ch5_eop__##f3##__VAL(R_SET_EOP_, ch5_eop_, v3) << R_SET_EOP__ch5_eop__BITNR) | \
- (R_SET_EOP__ch3_eop__##f4##__VAL(R_SET_EOP_, ch3_eop_, v4) << R_SET_EOP__ch3_eop__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SET_EOP_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SET_EOP.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SET_EOP_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_SET_EOP__ch9_eop__##f1_##_VAL(R_SET_EOP_, ch9_eop_, v1) << R_SET_EOP__ch9_eop__BITNR) | \
- (R_SET_EOP__ch7_eop__##f2_##_VAL(R_SET_EOP_, ch7_eop_, v2) << R_SET_EOP__ch7_eop__BITNR) | \
- (R_SET_EOP__ch5_eop__##f3_##_VAL(R_SET_EOP_, ch5_eop_, v3) << R_SET_EOP__ch5_eop__BITNR) | \
- (R_SET_EOP__ch3_eop__##f4_##_VAL(R_SET_EOP_, ch3_eop_, v4) << R_SET_EOP__ch3_eop__BITNR) \
-)
-
-#endif
-
-/*
- * R_SHARED_RAM_ADDR
- * - type: WO
- * - addr: 0xb0000044
- * - group: Shared RAM interface registers
- */
-
-#if USE_GROUP__Shared_RAM_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SHARED_RAM_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SHARED_RAM_ADDR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SHARED_RAM_ADDR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SHARED_RAM_ADDR(f1,v1) ( \
- *R_SHARED_RAM_ADDR__SADDR = ( \
- REG_INITIATED(R_SHARED_RAM_ADDR_) \
- REG_VAL__R_SHARED_RAM_ADDR_(f1##_,v1) \
- ), \
- R_SHARED_RAM_ADDR__WRITE(R_SHARED_RAM_ADDR__ADDR, *R_SHARED_RAM_ADDR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SHARED_RAM_ADDR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SHARED_RAM_ADDR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SHARED_RAM_ADDR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SHARED_RAM_ADDR__SHADOW(f1,v1) ( \
- *R_SHARED_RAM_ADDR__SADDR = ( \
- REG_INITIATED(R_SHARED_RAM_ADDR_) \
- REG_VAL__R_SHARED_RAM_ADDR_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SHARED_RAM_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SHARED_RAM_ADDR(f1,v1) ( \
- (R_SHARED_RAM_ADDR__base_addr__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SHARED_RAM_ADDR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SHARED_RAM_ADDR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SHARED_RAM_ADDR(f1,v1) ( \
- (R_SHARED_RAM_ADDR__base_addr__##f1##__VAL(R_SHARED_RAM_ADDR_, base_addr_, v1) << R_SHARED_RAM_ADDR__base_addr__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SHARED_RAM_ADDR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SHARED_RAM_ADDR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SHARED_RAM_ADDR_(f1_,v1) ( \
- (R_SHARED_RAM_ADDR__base_addr__##f1_##_VAL(R_SHARED_RAM_ADDR_, base_addr_, v1) << R_SHARED_RAM_ADDR__base_addr__BITNR) \
-)
-
-#endif
-
-/*
- * R_SHARED_RAM_CONFIG
- * - type: WO
- * - addr: 0xb0000040
- * - group: Shared RAM interface registers
- */
-
-#if USE_GROUP__Shared_RAM_interface_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SHARED_RAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SHARED_RAM_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SHARED_RAM_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SHARED_RAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- *R_SHARED_RAM_CONFIG__SADDR = ( \
- REG_INITIATED(R_SHARED_RAM_CONFIG_) \
- REG_VAL__R_SHARED_RAM_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4) \
- ), \
- R_SHARED_RAM_CONFIG__WRITE(R_SHARED_RAM_CONFIG__ADDR, *R_SHARED_RAM_CONFIG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SHARED_RAM_CONFIG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SHARED_RAM_CONFIG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SHARED_RAM_CONFIG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SHARED_RAM_CONFIG__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- *R_SHARED_RAM_CONFIG__SADDR = ( \
- REG_INITIATED(R_SHARED_RAM_CONFIG_) \
- REG_VAL__R_SHARED_RAM_CONFIG_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SHARED_RAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SHARED_RAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_SHARED_RAM_CONFIG__width__##f1##__MASK & REG__##v1) | \
- (R_SHARED_RAM_CONFIG__enable__##f2##__MASK & REG__##v2) | \
- (R_SHARED_RAM_CONFIG__pint__##f3##__MASK & REG__##v3) | \
- (R_SHARED_RAM_CONFIG__clri__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SHARED_RAM_CONFIG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SHARED_RAM_CONFIG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SHARED_RAM_CONFIG(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_SHARED_RAM_CONFIG__width__##f1##__VAL(R_SHARED_RAM_CONFIG_, width_, v1) << R_SHARED_RAM_CONFIG__width__BITNR) | \
- (R_SHARED_RAM_CONFIG__enable__##f2##__VAL(R_SHARED_RAM_CONFIG_, enable_, v2) << R_SHARED_RAM_CONFIG__enable__BITNR) | \
- (R_SHARED_RAM_CONFIG__pint__##f3##__VAL(R_SHARED_RAM_CONFIG_, pint_, v3) << R_SHARED_RAM_CONFIG__pint__BITNR) | \
- (R_SHARED_RAM_CONFIG__clri__##f4##__VAL(R_SHARED_RAM_CONFIG_, clri_, v4) << R_SHARED_RAM_CONFIG__clri__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SHARED_RAM_CONFIG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SHARED_RAM_CONFIG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SHARED_RAM_CONFIG_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_SHARED_RAM_CONFIG__width__##f1_##_VAL(R_SHARED_RAM_CONFIG_, width_, v1) << R_SHARED_RAM_CONFIG__width__BITNR) | \
- (R_SHARED_RAM_CONFIG__enable__##f2_##_VAL(R_SHARED_RAM_CONFIG_, enable_, v2) << R_SHARED_RAM_CONFIG__enable__BITNR) | \
- (R_SHARED_RAM_CONFIG__pint__##f3_##_VAL(R_SHARED_RAM_CONFIG_, pint_, v3) << R_SHARED_RAM_CONFIG__pint__BITNR) | \
- (R_SHARED_RAM_CONFIG__clri__##f4_##_VAL(R_SHARED_RAM_CONFIG_, clri_, v4) << R_SHARED_RAM_CONFIG__clri__BITNR) \
-)
-
-#endif
-
-/*
- * R_SINGLE_STEP
- * - type: WO
- * - addr: 0xb00000fe
- * - group: Test mode registers
- */
-
-#if USE_GROUP__Test_mode_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SINGLE_STEP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SINGLE_STEP.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SINGLE_STEP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SINGLE_STEP(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- *R_SINGLE_STEP__SADDR = ( \
- REG_INITIATED(R_SINGLE_STEP_) \
- REG_VAL__R_SINGLE_STEP_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4) \
- ), \
- R_SINGLE_STEP__WRITE(R_SINGLE_STEP__ADDR, *R_SINGLE_STEP__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SINGLE_STEP__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SINGLE_STEP.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SINGLE_STEP.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SINGLE_STEP__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- *R_SINGLE_STEP__SADDR = ( \
- REG_INITIATED(R_SINGLE_STEP_) \
- REG_VAL__R_SINGLE_STEP_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SINGLE_STEP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SINGLE_STEP(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_SINGLE_STEP__single_step__##f1##__MASK & REG__##v1) | \
- (R_SINGLE_STEP__step_wr__##f2##__MASK & REG__##v2) | \
- (R_SINGLE_STEP__step_rd__##f3##__MASK & REG__##v3) | \
- (R_SINGLE_STEP__step_fetch__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SINGLE_STEP
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SINGLE_STEP.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SINGLE_STEP(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_SINGLE_STEP__single_step__##f1##__VAL(R_SINGLE_STEP_, single_step_, v1) << R_SINGLE_STEP__single_step__BITNR) | \
- (R_SINGLE_STEP__step_wr__##f2##__VAL(R_SINGLE_STEP_, step_wr_, v2) << R_SINGLE_STEP__step_wr__BITNR) | \
- (R_SINGLE_STEP__step_rd__##f3##__VAL(R_SINGLE_STEP_, step_rd_, v3) << R_SINGLE_STEP__step_rd__BITNR) | \
- (R_SINGLE_STEP__step_fetch__##f4##__VAL(R_SINGLE_STEP_, step_fetch_, v4) << R_SINGLE_STEP__step_fetch__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SINGLE_STEP_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SINGLE_STEP.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SINGLE_STEP_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_SINGLE_STEP__single_step__##f1_##_VAL(R_SINGLE_STEP_, single_step_, v1) << R_SINGLE_STEP__single_step__BITNR) | \
- (R_SINGLE_STEP__step_wr__##f2_##_VAL(R_SINGLE_STEP_, step_wr_, v2) << R_SINGLE_STEP__step_wr__BITNR) | \
- (R_SINGLE_STEP__step_rd__##f3_##_VAL(R_SINGLE_STEP_, step_rd_, v3) << R_SINGLE_STEP__step_rd__BITNR) | \
- (R_SINGLE_STEP__step_fetch__##f4_##_VAL(R_SINGLE_STEP_, step_fetch_, v4) << R_SINGLE_STEP__step_fetch__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL1_CTRL
- * - type: WO
- * - addr: 0xb0000068
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL1_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL1_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- *R_SYNC_SERIAL1_CTRL__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL1_CTRL_) \
- REG_VAL__R_SYNC_SERIAL1_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23) \
- ), \
- R_SYNC_SERIAL1_CTRL__WRITE(R_SYNC_SERIAL1_CTRL__ADDR, *R_SYNC_SERIAL1_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL1_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL1_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL1_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL1_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- *R_SYNC_SERIAL1_CTRL__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL1_CTRL_) \
- REG_VAL__R_SYNC_SERIAL1_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- (R_SYNC_SERIAL1_CTRL__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SYNC_SERIAL1_CTRL__dma_enable__##f2##__MASK & REG__##v2) | \
- (R_SYNC_SERIAL1_CTRL__mode__##f3##__MASK & REG__##v3) | \
- (R_SYNC_SERIAL1_CTRL__error__##f4##__MASK & REG__##v4) | \
- (R_SYNC_SERIAL1_CTRL__rec_enable__##f5##__MASK & REG__##v5) | \
- (R_SYNC_SERIAL1_CTRL__f_synctype__##f6##__MASK & REG__##v6) | \
- (R_SYNC_SERIAL1_CTRL__f_syncsize__##f7##__MASK & REG__##v7) | \
- (R_SYNC_SERIAL1_CTRL__f_sync__##f8##__MASK & REG__##v8) | \
- (R_SYNC_SERIAL1_CTRL__clk_mode__##f9##__MASK & REG__##v9) | \
- (R_SYNC_SERIAL1_CTRL__clk_halt__##f10##__MASK & REG__##v10) | \
- (R_SYNC_SERIAL1_CTRL__bitorder__##f11##__MASK & REG__##v11) | \
- (R_SYNC_SERIAL1_CTRL__tr_enable__##f12##__MASK & REG__##v12) | \
- (R_SYNC_SERIAL1_CTRL__wordsize__##f13##__MASK & REG__##v13) | \
- (R_SYNC_SERIAL1_CTRL__buf_empty__##f14##__MASK & REG__##v14) | \
- (R_SYNC_SERIAL1_CTRL__buf_full__##f15##__MASK & REG__##v15) | \
- (R_SYNC_SERIAL1_CTRL__flow_ctrl__##f16##__MASK & REG__##v16) | \
- (R_SYNC_SERIAL1_CTRL__clk_polarity__##f17##__MASK & REG__##v17) | \
- (R_SYNC_SERIAL1_CTRL__frame_polarity__##f18##__MASK & REG__##v18) | \
- (R_SYNC_SERIAL1_CTRL__status_polarity__##f19##__MASK & REG__##v19) | \
- (R_SYNC_SERIAL1_CTRL__clk_driver__##f20##__MASK & REG__##v20) | \
- (R_SYNC_SERIAL1_CTRL__frame_driver__##f21##__MASK & REG__##v21) | \
- (R_SYNC_SERIAL1_CTRL__status_driver__##f22##__MASK & REG__##v22) | \
- (R_SYNC_SERIAL1_CTRL__def_out0__##f23##__MASK & REG__##v23) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- (R_SYNC_SERIAL1_CTRL__tr_baud__##f1##__VAL(R_SYNC_SERIAL1_CTRL_, tr_baud_, v1) << R_SYNC_SERIAL1_CTRL__tr_baud__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__dma_enable__##f2##__VAL(R_SYNC_SERIAL1_CTRL_, dma_enable_, v2) << R_SYNC_SERIAL1_CTRL__dma_enable__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__mode__##f3##__VAL(R_SYNC_SERIAL1_CTRL_, mode_, v3) << R_SYNC_SERIAL1_CTRL__mode__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__error__##f4##__VAL(R_SYNC_SERIAL1_CTRL_, error_, v4) << R_SYNC_SERIAL1_CTRL__error__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__rec_enable__##f5##__VAL(R_SYNC_SERIAL1_CTRL_, rec_enable_, v5) << R_SYNC_SERIAL1_CTRL__rec_enable__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__f_synctype__##f6##__VAL(R_SYNC_SERIAL1_CTRL_, f_synctype_, v6) << R_SYNC_SERIAL1_CTRL__f_synctype__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__f_syncsize__##f7##__VAL(R_SYNC_SERIAL1_CTRL_, f_syncsize_, v7) << R_SYNC_SERIAL1_CTRL__f_syncsize__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__f_sync__##f8##__VAL(R_SYNC_SERIAL1_CTRL_, f_sync_, v8) << R_SYNC_SERIAL1_CTRL__f_sync__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__clk_mode__##f9##__VAL(R_SYNC_SERIAL1_CTRL_, clk_mode_, v9) << R_SYNC_SERIAL1_CTRL__clk_mode__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__clk_halt__##f10##__VAL(R_SYNC_SERIAL1_CTRL_, clk_halt_, v10) << R_SYNC_SERIAL1_CTRL__clk_halt__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__bitorder__##f11##__VAL(R_SYNC_SERIAL1_CTRL_, bitorder_, v11) << R_SYNC_SERIAL1_CTRL__bitorder__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__tr_enable__##f12##__VAL(R_SYNC_SERIAL1_CTRL_, tr_enable_, v12) << R_SYNC_SERIAL1_CTRL__tr_enable__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__wordsize__##f13##__VAL(R_SYNC_SERIAL1_CTRL_, wordsize_, v13) << R_SYNC_SERIAL1_CTRL__wordsize__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__buf_empty__##f14##__VAL(R_SYNC_SERIAL1_CTRL_, buf_empty_, v14) << R_SYNC_SERIAL1_CTRL__buf_empty__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__buf_full__##f15##__VAL(R_SYNC_SERIAL1_CTRL_, buf_full_, v15) << R_SYNC_SERIAL1_CTRL__buf_full__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__flow_ctrl__##f16##__VAL(R_SYNC_SERIAL1_CTRL_, flow_ctrl_, v16) << R_SYNC_SERIAL1_CTRL__flow_ctrl__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__clk_polarity__##f17##__VAL(R_SYNC_SERIAL1_CTRL_, clk_polarity_, v17) << R_SYNC_SERIAL1_CTRL__clk_polarity__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__frame_polarity__##f18##__VAL(R_SYNC_SERIAL1_CTRL_, frame_polarity_, v18) << R_SYNC_SERIAL1_CTRL__frame_polarity__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__status_polarity__##f19##__VAL(R_SYNC_SERIAL1_CTRL_, status_polarity_, v19) << R_SYNC_SERIAL1_CTRL__status_polarity__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__clk_driver__##f20##__VAL(R_SYNC_SERIAL1_CTRL_, clk_driver_, v20) << R_SYNC_SERIAL1_CTRL__clk_driver__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__frame_driver__##f21##__VAL(R_SYNC_SERIAL1_CTRL_, frame_driver_, v21) << R_SYNC_SERIAL1_CTRL__frame_driver__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__status_driver__##f22##__VAL(R_SYNC_SERIAL1_CTRL_, status_driver_, v22) << R_SYNC_SERIAL1_CTRL__status_driver__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__def_out0__##f23##__VAL(R_SYNC_SERIAL1_CTRL_, def_out0_, v23) << R_SYNC_SERIAL1_CTRL__def_out0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23) ( \
- (R_SYNC_SERIAL1_CTRL__tr_baud__##f1_##_VAL(R_SYNC_SERIAL1_CTRL_, tr_baud_, v1) << R_SYNC_SERIAL1_CTRL__tr_baud__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__dma_enable__##f2_##_VAL(R_SYNC_SERIAL1_CTRL_, dma_enable_, v2) << R_SYNC_SERIAL1_CTRL__dma_enable__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__mode__##f3_##_VAL(R_SYNC_SERIAL1_CTRL_, mode_, v3) << R_SYNC_SERIAL1_CTRL__mode__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__error__##f4_##_VAL(R_SYNC_SERIAL1_CTRL_, error_, v4) << R_SYNC_SERIAL1_CTRL__error__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__rec_enable__##f5_##_VAL(R_SYNC_SERIAL1_CTRL_, rec_enable_, v5) << R_SYNC_SERIAL1_CTRL__rec_enable__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__f_synctype__##f6_##_VAL(R_SYNC_SERIAL1_CTRL_, f_synctype_, v6) << R_SYNC_SERIAL1_CTRL__f_synctype__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__f_syncsize__##f7_##_VAL(R_SYNC_SERIAL1_CTRL_, f_syncsize_, v7) << R_SYNC_SERIAL1_CTRL__f_syncsize__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__f_sync__##f8_##_VAL(R_SYNC_SERIAL1_CTRL_, f_sync_, v8) << R_SYNC_SERIAL1_CTRL__f_sync__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__clk_mode__##f9_##_VAL(R_SYNC_SERIAL1_CTRL_, clk_mode_, v9) << R_SYNC_SERIAL1_CTRL__clk_mode__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__clk_halt__##f10_##_VAL(R_SYNC_SERIAL1_CTRL_, clk_halt_, v10) << R_SYNC_SERIAL1_CTRL__clk_halt__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__bitorder__##f11_##_VAL(R_SYNC_SERIAL1_CTRL_, bitorder_, v11) << R_SYNC_SERIAL1_CTRL__bitorder__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__tr_enable__##f12_##_VAL(R_SYNC_SERIAL1_CTRL_, tr_enable_, v12) << R_SYNC_SERIAL1_CTRL__tr_enable__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__wordsize__##f13_##_VAL(R_SYNC_SERIAL1_CTRL_, wordsize_, v13) << R_SYNC_SERIAL1_CTRL__wordsize__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__buf_empty__##f14_##_VAL(R_SYNC_SERIAL1_CTRL_, buf_empty_, v14) << R_SYNC_SERIAL1_CTRL__buf_empty__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__buf_full__##f15_##_VAL(R_SYNC_SERIAL1_CTRL_, buf_full_, v15) << R_SYNC_SERIAL1_CTRL__buf_full__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__flow_ctrl__##f16_##_VAL(R_SYNC_SERIAL1_CTRL_, flow_ctrl_, v16) << R_SYNC_SERIAL1_CTRL__flow_ctrl__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__clk_polarity__##f17_##_VAL(R_SYNC_SERIAL1_CTRL_, clk_polarity_, v17) << R_SYNC_SERIAL1_CTRL__clk_polarity__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__frame_polarity__##f18_##_VAL(R_SYNC_SERIAL1_CTRL_, frame_polarity_, v18) << R_SYNC_SERIAL1_CTRL__frame_polarity__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__status_polarity__##f19_##_VAL(R_SYNC_SERIAL1_CTRL_, status_polarity_, v19) << R_SYNC_SERIAL1_CTRL__status_polarity__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__clk_driver__##f20_##_VAL(R_SYNC_SERIAL1_CTRL_, clk_driver_, v20) << R_SYNC_SERIAL1_CTRL__clk_driver__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__frame_driver__##f21_##_VAL(R_SYNC_SERIAL1_CTRL_, frame_driver_, v21) << R_SYNC_SERIAL1_CTRL__frame_driver__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__status_driver__##f22_##_VAL(R_SYNC_SERIAL1_CTRL_, status_driver_, v22) << R_SYNC_SERIAL1_CTRL__status_driver__BITNR) | \
- (R_SYNC_SERIAL1_CTRL__def_out0__##f23_##_VAL(R_SYNC_SERIAL1_CTRL_, def_out0_, v23) << R_SYNC_SERIAL1_CTRL__def_out0__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL1_REC_BYTE
- * - type: RO
- * - addr: 0xb000006c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL1_REC_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL1_REC_BYTE(f1,v1) ( \
- (R_SYNC_SERIAL1_REC_BYTE__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_REC_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_REC_BYTE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_REC_BYTE(f1,v1) ( \
- (R_SYNC_SERIAL1_REC_BYTE__data_in__##f1##__VAL(R_SYNC_SERIAL1_REC_BYTE_, data_in_, v1) << R_SYNC_SERIAL1_REC_BYTE__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_REC_BYTE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_REC_BYTE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_REC_BYTE_(f1_,v1) ( \
- (R_SYNC_SERIAL1_REC_BYTE__data_in__##f1_##_VAL(R_SYNC_SERIAL1_REC_BYTE_, data_in_, v1) << R_SYNC_SERIAL1_REC_BYTE__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL1_REC_DATA
- * - type: RO
- * - addr: 0xb000006c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL1_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL1_REC_DATA(f1,v1) ( \
- (R_SYNC_SERIAL1_REC_DATA__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_REC_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_REC_DATA(f1,v1) ( \
- (R_SYNC_SERIAL1_REC_DATA__data_in__##f1##__VAL(R_SYNC_SERIAL1_REC_DATA_, data_in_, v1) << R_SYNC_SERIAL1_REC_DATA__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_REC_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_REC_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_REC_DATA_(f1_,v1) ( \
- (R_SYNC_SERIAL1_REC_DATA__data_in__##f1_##_VAL(R_SYNC_SERIAL1_REC_DATA_, data_in_, v1) << R_SYNC_SERIAL1_REC_DATA__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL1_REC_WORD
- * - type: RO
- * - addr: 0xb000006c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL1_REC_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL1_REC_WORD(f1,v1) ( \
- (R_SYNC_SERIAL1_REC_WORD__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_REC_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_REC_WORD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_REC_WORD(f1,v1) ( \
- (R_SYNC_SERIAL1_REC_WORD__data_in__##f1##__VAL(R_SYNC_SERIAL1_REC_WORD_, data_in_, v1) << R_SYNC_SERIAL1_REC_WORD__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_REC_WORD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_REC_WORD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_REC_WORD_(f1_,v1) ( \
- (R_SYNC_SERIAL1_REC_WORD__data_in__##f1_##_VAL(R_SYNC_SERIAL1_REC_WORD_, data_in_, v1) << R_SYNC_SERIAL1_REC_WORD__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL1_STATUS
- * - type: RO
- * - addr: 0xb0000068
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL1_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SYNC_SERIAL1_STATUS__rec_status__##f1##__MASK & REG__##v1) | \
- (R_SYNC_SERIAL1_STATUS__tr_empty__##f2##__MASK & REG__##v2) | \
- (R_SYNC_SERIAL1_STATUS__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SYNC_SERIAL1_STATUS__pin_1__##f4##__MASK & REG__##v4) | \
- (R_SYNC_SERIAL1_STATUS__pin_0__##f5##__MASK & REG__##v5) | \
- (R_SYNC_SERIAL1_STATUS__underflow__##f6##__MASK & REG__##v6) | \
- (R_SYNC_SERIAL1_STATUS__overrun__##f7##__MASK & REG__##v7) | \
- (R_SYNC_SERIAL1_STATUS__data_avail__##f8##__MASK & REG__##v8) | \
- (R_SYNC_SERIAL1_STATUS__data__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SYNC_SERIAL1_STATUS__rec_status__##f1##__VAL(R_SYNC_SERIAL1_STATUS_, rec_status_, v1) << R_SYNC_SERIAL1_STATUS__rec_status__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__tr_empty__##f2##__VAL(R_SYNC_SERIAL1_STATUS_, tr_empty_, v2) << R_SYNC_SERIAL1_STATUS__tr_empty__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__tr_ready__##f3##__VAL(R_SYNC_SERIAL1_STATUS_, tr_ready_, v3) << R_SYNC_SERIAL1_STATUS__tr_ready__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__pin_1__##f4##__VAL(R_SYNC_SERIAL1_STATUS_, pin_1_, v4) << R_SYNC_SERIAL1_STATUS__pin_1__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__pin_0__##f5##__VAL(R_SYNC_SERIAL1_STATUS_, pin_0_, v5) << R_SYNC_SERIAL1_STATUS__pin_0__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__underflow__##f6##__VAL(R_SYNC_SERIAL1_STATUS_, underflow_, v6) << R_SYNC_SERIAL1_STATUS__underflow__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__overrun__##f7##__VAL(R_SYNC_SERIAL1_STATUS_, overrun_, v7) << R_SYNC_SERIAL1_STATUS__overrun__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__data_avail__##f8##__VAL(R_SYNC_SERIAL1_STATUS_, data_avail_, v8) << R_SYNC_SERIAL1_STATUS__data_avail__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__data__##f9##__VAL(R_SYNC_SERIAL1_STATUS_, data_, v9) << R_SYNC_SERIAL1_STATUS__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_SYNC_SERIAL1_STATUS__rec_status__##f1_##_VAL(R_SYNC_SERIAL1_STATUS_, rec_status_, v1) << R_SYNC_SERIAL1_STATUS__rec_status__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__tr_empty__##f2_##_VAL(R_SYNC_SERIAL1_STATUS_, tr_empty_, v2) << R_SYNC_SERIAL1_STATUS__tr_empty__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__tr_ready__##f3_##_VAL(R_SYNC_SERIAL1_STATUS_, tr_ready_, v3) << R_SYNC_SERIAL1_STATUS__tr_ready__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__pin_1__##f4_##_VAL(R_SYNC_SERIAL1_STATUS_, pin_1_, v4) << R_SYNC_SERIAL1_STATUS__pin_1__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__pin_0__##f5_##_VAL(R_SYNC_SERIAL1_STATUS_, pin_0_, v5) << R_SYNC_SERIAL1_STATUS__pin_0__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__underflow__##f6_##_VAL(R_SYNC_SERIAL1_STATUS_, underflow_, v6) << R_SYNC_SERIAL1_STATUS__underflow__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__overrun__##f7_##_VAL(R_SYNC_SERIAL1_STATUS_, overrun_, v7) << R_SYNC_SERIAL1_STATUS__overrun__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__data_avail__##f8_##_VAL(R_SYNC_SERIAL1_STATUS_, data_avail_, v8) << R_SYNC_SERIAL1_STATUS__data_avail__BITNR) | \
- (R_SYNC_SERIAL1_STATUS__data__##f9_##_VAL(R_SYNC_SERIAL1_STATUS_, data_, v9) << R_SYNC_SERIAL1_STATUS__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL1_TR_BYTE
- * - type: WO
- * - addr: 0xb000006c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL1_TR_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL1_TR_BYTE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL1_TR_BYTE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL1_TR_BYTE(f1,v1) ( \
- *R_SYNC_SERIAL1_TR_BYTE__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL1_TR_BYTE_) \
- REG_VAL__R_SYNC_SERIAL1_TR_BYTE_(f1##_,v1) \
- ), \
- R_SYNC_SERIAL1_TR_BYTE__WRITE(R_SYNC_SERIAL1_TR_BYTE__ADDR, *R_SYNC_SERIAL1_TR_BYTE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL1_TR_BYTE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL1_TR_BYTE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL1_TR_BYTE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL1_TR_BYTE__SHADOW(f1,v1) ( \
- *R_SYNC_SERIAL1_TR_BYTE__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL1_TR_BYTE_) \
- REG_VAL__R_SYNC_SERIAL1_TR_BYTE_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL1_TR_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL1_TR_BYTE(f1,v1) ( \
- (R_SYNC_SERIAL1_TR_BYTE__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_TR_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_TR_BYTE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_TR_BYTE(f1,v1) ( \
- (R_SYNC_SERIAL1_TR_BYTE__data_out__##f1##__VAL(R_SYNC_SERIAL1_TR_BYTE_, data_out_, v1) << R_SYNC_SERIAL1_TR_BYTE__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_TR_BYTE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_TR_BYTE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_TR_BYTE_(f1_,v1) ( \
- (R_SYNC_SERIAL1_TR_BYTE__data_out__##f1_##_VAL(R_SYNC_SERIAL1_TR_BYTE_, data_out_, v1) << R_SYNC_SERIAL1_TR_BYTE__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL1_TR_DATA
- * - type: WO
- * - addr: 0xb000006c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL1_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL1_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL1_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL1_TR_DATA(f1,v1) ( \
- *R_SYNC_SERIAL1_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL1_TR_DATA_) \
- REG_VAL__R_SYNC_SERIAL1_TR_DATA_(f1##_,v1) \
- ), \
- R_SYNC_SERIAL1_TR_DATA__WRITE(R_SYNC_SERIAL1_TR_DATA__ADDR, *R_SYNC_SERIAL1_TR_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL1_TR_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL1_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL1_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL1_TR_DATA__SHADOW(f1,v1) ( \
- *R_SYNC_SERIAL1_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL1_TR_DATA_) \
- REG_VAL__R_SYNC_SERIAL1_TR_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL1_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL1_TR_DATA(f1,v1) ( \
- (R_SYNC_SERIAL1_TR_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_TR_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_TR_DATA(f1,v1) ( \
- (R_SYNC_SERIAL1_TR_DATA__data_out__##f1##__VAL(R_SYNC_SERIAL1_TR_DATA_, data_out_, v1) << R_SYNC_SERIAL1_TR_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_TR_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_TR_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_TR_DATA_(f1_,v1) ( \
- (R_SYNC_SERIAL1_TR_DATA__data_out__##f1_##_VAL(R_SYNC_SERIAL1_TR_DATA_, data_out_, v1) << R_SYNC_SERIAL1_TR_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL1_TR_WORD
- * - type: WO
- * - addr: 0xb000006c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL1_TR_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL1_TR_WORD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL1_TR_WORD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL1_TR_WORD(f1,v1) ( \
- *R_SYNC_SERIAL1_TR_WORD__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL1_TR_WORD_) \
- REG_VAL__R_SYNC_SERIAL1_TR_WORD_(f1##_,v1) \
- ), \
- R_SYNC_SERIAL1_TR_WORD__WRITE(R_SYNC_SERIAL1_TR_WORD__ADDR, *R_SYNC_SERIAL1_TR_WORD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL1_TR_WORD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL1_TR_WORD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL1_TR_WORD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL1_TR_WORD__SHADOW(f1,v1) ( \
- *R_SYNC_SERIAL1_TR_WORD__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL1_TR_WORD_) \
- REG_VAL__R_SYNC_SERIAL1_TR_WORD_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL1_TR_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL1_TR_WORD(f1,v1) ( \
- (R_SYNC_SERIAL1_TR_WORD__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_TR_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_TR_WORD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_TR_WORD(f1,v1) ( \
- (R_SYNC_SERIAL1_TR_WORD__data_out__##f1##__VAL(R_SYNC_SERIAL1_TR_WORD_, data_out_, v1) << R_SYNC_SERIAL1_TR_WORD__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL1_TR_WORD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL1_TR_WORD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL1_TR_WORD_(f1_,v1) ( \
- (R_SYNC_SERIAL1_TR_WORD__data_out__##f1_##_VAL(R_SYNC_SERIAL1_TR_WORD_, data_out_, v1) << R_SYNC_SERIAL1_TR_WORD__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL3_CTRL
- * - type: WO
- * - addr: 0xb0000078
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL3_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL3_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL3_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL3_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- *R_SYNC_SERIAL3_CTRL__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL3_CTRL_) \
- REG_VAL__R_SYNC_SERIAL3_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23) \
- ), \
- R_SYNC_SERIAL3_CTRL__WRITE(R_SYNC_SERIAL3_CTRL__ADDR, *R_SYNC_SERIAL3_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL3_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL3_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL3_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL3_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- *R_SYNC_SERIAL3_CTRL__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL3_CTRL_) \
- REG_VAL__R_SYNC_SERIAL3_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL3_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL3_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- (R_SYNC_SERIAL3_CTRL__tr_baud__##f1##__MASK & REG__##v1) | \
- (R_SYNC_SERIAL3_CTRL__dma_enable__##f2##__MASK & REG__##v2) | \
- (R_SYNC_SERIAL3_CTRL__mode__##f3##__MASK & REG__##v3) | \
- (R_SYNC_SERIAL3_CTRL__error__##f4##__MASK & REG__##v4) | \
- (R_SYNC_SERIAL3_CTRL__rec_enable__##f5##__MASK & REG__##v5) | \
- (R_SYNC_SERIAL3_CTRL__f_synctype__##f6##__MASK & REG__##v6) | \
- (R_SYNC_SERIAL3_CTRL__f_syncsize__##f7##__MASK & REG__##v7) | \
- (R_SYNC_SERIAL3_CTRL__f_sync__##f8##__MASK & REG__##v8) | \
- (R_SYNC_SERIAL3_CTRL__clk_mode__##f9##__MASK & REG__##v9) | \
- (R_SYNC_SERIAL3_CTRL__clk_halt__##f10##__MASK & REG__##v10) | \
- (R_SYNC_SERIAL3_CTRL__bitorder__##f11##__MASK & REG__##v11) | \
- (R_SYNC_SERIAL3_CTRL__tr_enable__##f12##__MASK & REG__##v12) | \
- (R_SYNC_SERIAL3_CTRL__wordsize__##f13##__MASK & REG__##v13) | \
- (R_SYNC_SERIAL3_CTRL__buf_empty__##f14##__MASK & REG__##v14) | \
- (R_SYNC_SERIAL3_CTRL__buf_full__##f15##__MASK & REG__##v15) | \
- (R_SYNC_SERIAL3_CTRL__flow_ctrl__##f16##__MASK & REG__##v16) | \
- (R_SYNC_SERIAL3_CTRL__clk_polarity__##f17##__MASK & REG__##v17) | \
- (R_SYNC_SERIAL3_CTRL__frame_polarity__##f18##__MASK & REG__##v18) | \
- (R_SYNC_SERIAL3_CTRL__status_polarity__##f19##__MASK & REG__##v19) | \
- (R_SYNC_SERIAL3_CTRL__clk_driver__##f20##__MASK & REG__##v20) | \
- (R_SYNC_SERIAL3_CTRL__frame_driver__##f21##__MASK & REG__##v21) | \
- (R_SYNC_SERIAL3_CTRL__status_driver__##f22##__MASK & REG__##v22) | \
- (R_SYNC_SERIAL3_CTRL__def_out0__##f23##__MASK & REG__##v23) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23) ( \
- (R_SYNC_SERIAL3_CTRL__tr_baud__##f1##__VAL(R_SYNC_SERIAL3_CTRL_, tr_baud_, v1) << R_SYNC_SERIAL3_CTRL__tr_baud__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__dma_enable__##f2##__VAL(R_SYNC_SERIAL3_CTRL_, dma_enable_, v2) << R_SYNC_SERIAL3_CTRL__dma_enable__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__mode__##f3##__VAL(R_SYNC_SERIAL3_CTRL_, mode_, v3) << R_SYNC_SERIAL3_CTRL__mode__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__error__##f4##__VAL(R_SYNC_SERIAL3_CTRL_, error_, v4) << R_SYNC_SERIAL3_CTRL__error__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__rec_enable__##f5##__VAL(R_SYNC_SERIAL3_CTRL_, rec_enable_, v5) << R_SYNC_SERIAL3_CTRL__rec_enable__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__f_synctype__##f6##__VAL(R_SYNC_SERIAL3_CTRL_, f_synctype_, v6) << R_SYNC_SERIAL3_CTRL__f_synctype__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__f_syncsize__##f7##__VAL(R_SYNC_SERIAL3_CTRL_, f_syncsize_, v7) << R_SYNC_SERIAL3_CTRL__f_syncsize__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__f_sync__##f8##__VAL(R_SYNC_SERIAL3_CTRL_, f_sync_, v8) << R_SYNC_SERIAL3_CTRL__f_sync__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__clk_mode__##f9##__VAL(R_SYNC_SERIAL3_CTRL_, clk_mode_, v9) << R_SYNC_SERIAL3_CTRL__clk_mode__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__clk_halt__##f10##__VAL(R_SYNC_SERIAL3_CTRL_, clk_halt_, v10) << R_SYNC_SERIAL3_CTRL__clk_halt__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__bitorder__##f11##__VAL(R_SYNC_SERIAL3_CTRL_, bitorder_, v11) << R_SYNC_SERIAL3_CTRL__bitorder__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__tr_enable__##f12##__VAL(R_SYNC_SERIAL3_CTRL_, tr_enable_, v12) << R_SYNC_SERIAL3_CTRL__tr_enable__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__wordsize__##f13##__VAL(R_SYNC_SERIAL3_CTRL_, wordsize_, v13) << R_SYNC_SERIAL3_CTRL__wordsize__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__buf_empty__##f14##__VAL(R_SYNC_SERIAL3_CTRL_, buf_empty_, v14) << R_SYNC_SERIAL3_CTRL__buf_empty__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__buf_full__##f15##__VAL(R_SYNC_SERIAL3_CTRL_, buf_full_, v15) << R_SYNC_SERIAL3_CTRL__buf_full__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__flow_ctrl__##f16##__VAL(R_SYNC_SERIAL3_CTRL_, flow_ctrl_, v16) << R_SYNC_SERIAL3_CTRL__flow_ctrl__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__clk_polarity__##f17##__VAL(R_SYNC_SERIAL3_CTRL_, clk_polarity_, v17) << R_SYNC_SERIAL3_CTRL__clk_polarity__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__frame_polarity__##f18##__VAL(R_SYNC_SERIAL3_CTRL_, frame_polarity_, v18) << R_SYNC_SERIAL3_CTRL__frame_polarity__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__status_polarity__##f19##__VAL(R_SYNC_SERIAL3_CTRL_, status_polarity_, v19) << R_SYNC_SERIAL3_CTRL__status_polarity__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__clk_driver__##f20##__VAL(R_SYNC_SERIAL3_CTRL_, clk_driver_, v20) << R_SYNC_SERIAL3_CTRL__clk_driver__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__frame_driver__##f21##__VAL(R_SYNC_SERIAL3_CTRL_, frame_driver_, v21) << R_SYNC_SERIAL3_CTRL__frame_driver__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__status_driver__##f22##__VAL(R_SYNC_SERIAL3_CTRL_, status_driver_, v22) << R_SYNC_SERIAL3_CTRL__status_driver__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__def_out0__##f23##__VAL(R_SYNC_SERIAL3_CTRL_, def_out0_, v23) << R_SYNC_SERIAL3_CTRL__def_out0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23) ( \
- (R_SYNC_SERIAL3_CTRL__tr_baud__##f1_##_VAL(R_SYNC_SERIAL3_CTRL_, tr_baud_, v1) << R_SYNC_SERIAL3_CTRL__tr_baud__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__dma_enable__##f2_##_VAL(R_SYNC_SERIAL3_CTRL_, dma_enable_, v2) << R_SYNC_SERIAL3_CTRL__dma_enable__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__mode__##f3_##_VAL(R_SYNC_SERIAL3_CTRL_, mode_, v3) << R_SYNC_SERIAL3_CTRL__mode__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__error__##f4_##_VAL(R_SYNC_SERIAL3_CTRL_, error_, v4) << R_SYNC_SERIAL3_CTRL__error__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__rec_enable__##f5_##_VAL(R_SYNC_SERIAL3_CTRL_, rec_enable_, v5) << R_SYNC_SERIAL3_CTRL__rec_enable__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__f_synctype__##f6_##_VAL(R_SYNC_SERIAL3_CTRL_, f_synctype_, v6) << R_SYNC_SERIAL3_CTRL__f_synctype__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__f_syncsize__##f7_##_VAL(R_SYNC_SERIAL3_CTRL_, f_syncsize_, v7) << R_SYNC_SERIAL3_CTRL__f_syncsize__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__f_sync__##f8_##_VAL(R_SYNC_SERIAL3_CTRL_, f_sync_, v8) << R_SYNC_SERIAL3_CTRL__f_sync__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__clk_mode__##f9_##_VAL(R_SYNC_SERIAL3_CTRL_, clk_mode_, v9) << R_SYNC_SERIAL3_CTRL__clk_mode__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__clk_halt__##f10_##_VAL(R_SYNC_SERIAL3_CTRL_, clk_halt_, v10) << R_SYNC_SERIAL3_CTRL__clk_halt__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__bitorder__##f11_##_VAL(R_SYNC_SERIAL3_CTRL_, bitorder_, v11) << R_SYNC_SERIAL3_CTRL__bitorder__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__tr_enable__##f12_##_VAL(R_SYNC_SERIAL3_CTRL_, tr_enable_, v12) << R_SYNC_SERIAL3_CTRL__tr_enable__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__wordsize__##f13_##_VAL(R_SYNC_SERIAL3_CTRL_, wordsize_, v13) << R_SYNC_SERIAL3_CTRL__wordsize__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__buf_empty__##f14_##_VAL(R_SYNC_SERIAL3_CTRL_, buf_empty_, v14) << R_SYNC_SERIAL3_CTRL__buf_empty__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__buf_full__##f15_##_VAL(R_SYNC_SERIAL3_CTRL_, buf_full_, v15) << R_SYNC_SERIAL3_CTRL__buf_full__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__flow_ctrl__##f16_##_VAL(R_SYNC_SERIAL3_CTRL_, flow_ctrl_, v16) << R_SYNC_SERIAL3_CTRL__flow_ctrl__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__clk_polarity__##f17_##_VAL(R_SYNC_SERIAL3_CTRL_, clk_polarity_, v17) << R_SYNC_SERIAL3_CTRL__clk_polarity__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__frame_polarity__##f18_##_VAL(R_SYNC_SERIAL3_CTRL_, frame_polarity_, v18) << R_SYNC_SERIAL3_CTRL__frame_polarity__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__status_polarity__##f19_##_VAL(R_SYNC_SERIAL3_CTRL_, status_polarity_, v19) << R_SYNC_SERIAL3_CTRL__status_polarity__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__clk_driver__##f20_##_VAL(R_SYNC_SERIAL3_CTRL_, clk_driver_, v20) << R_SYNC_SERIAL3_CTRL__clk_driver__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__frame_driver__##f21_##_VAL(R_SYNC_SERIAL3_CTRL_, frame_driver_, v21) << R_SYNC_SERIAL3_CTRL__frame_driver__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__status_driver__##f22_##_VAL(R_SYNC_SERIAL3_CTRL_, status_driver_, v22) << R_SYNC_SERIAL3_CTRL__status_driver__BITNR) | \
- (R_SYNC_SERIAL3_CTRL__def_out0__##f23_##_VAL(R_SYNC_SERIAL3_CTRL_, def_out0_, v23) << R_SYNC_SERIAL3_CTRL__def_out0__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL3_REC_BYTE
- * - type: RO
- * - addr: 0xb000007c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL3_REC_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL3_REC_BYTE(f1,v1) ( \
- (R_SYNC_SERIAL3_REC_BYTE__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_REC_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_REC_BYTE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_REC_BYTE(f1,v1) ( \
- (R_SYNC_SERIAL3_REC_BYTE__data_in__##f1##__VAL(R_SYNC_SERIAL3_REC_BYTE_, data_in_, v1) << R_SYNC_SERIAL3_REC_BYTE__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_REC_BYTE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_REC_BYTE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_REC_BYTE_(f1_,v1) ( \
- (R_SYNC_SERIAL3_REC_BYTE__data_in__##f1_##_VAL(R_SYNC_SERIAL3_REC_BYTE_, data_in_, v1) << R_SYNC_SERIAL3_REC_BYTE__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL3_REC_DATA
- * - type: RO
- * - addr: 0xb000007c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL3_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL3_REC_DATA(f1,v1) ( \
- (R_SYNC_SERIAL3_REC_DATA__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_REC_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_REC_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_REC_DATA(f1,v1) ( \
- (R_SYNC_SERIAL3_REC_DATA__data_in__##f1##__VAL(R_SYNC_SERIAL3_REC_DATA_, data_in_, v1) << R_SYNC_SERIAL3_REC_DATA__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_REC_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_REC_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_REC_DATA_(f1_,v1) ( \
- (R_SYNC_SERIAL3_REC_DATA__data_in__##f1_##_VAL(R_SYNC_SERIAL3_REC_DATA_, data_in_, v1) << R_SYNC_SERIAL3_REC_DATA__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL3_REC_WORD
- * - type: RO
- * - addr: 0xb000007c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL3_REC_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL3_REC_WORD(f1,v1) ( \
- (R_SYNC_SERIAL3_REC_WORD__data_in__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_REC_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_REC_WORD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_REC_WORD(f1,v1) ( \
- (R_SYNC_SERIAL3_REC_WORD__data_in__##f1##__VAL(R_SYNC_SERIAL3_REC_WORD_, data_in_, v1) << R_SYNC_SERIAL3_REC_WORD__data_in__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_REC_WORD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_REC_WORD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_REC_WORD_(f1_,v1) ( \
- (R_SYNC_SERIAL3_REC_WORD__data_in__##f1_##_VAL(R_SYNC_SERIAL3_REC_WORD_, data_in_, v1) << R_SYNC_SERIAL3_REC_WORD__data_in__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL3_STATUS
- * - type: RO
- * - addr: 0xb0000078
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL3_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL3_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SYNC_SERIAL3_STATUS__rec_status__##f1##__MASK & REG__##v1) | \
- (R_SYNC_SERIAL3_STATUS__tr_empty__##f2##__MASK & REG__##v2) | \
- (R_SYNC_SERIAL3_STATUS__tr_ready__##f3##__MASK & REG__##v3) | \
- (R_SYNC_SERIAL3_STATUS__pin_1__##f4##__MASK & REG__##v4) | \
- (R_SYNC_SERIAL3_STATUS__pin_0__##f5##__MASK & REG__##v5) | \
- (R_SYNC_SERIAL3_STATUS__underflow__##f6##__MASK & REG__##v6) | \
- (R_SYNC_SERIAL3_STATUS__overrun__##f7##__MASK & REG__##v7) | \
- (R_SYNC_SERIAL3_STATUS__data_avail__##f8##__MASK & REG__##v8) | \
- (R_SYNC_SERIAL3_STATUS__data__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_SYNC_SERIAL3_STATUS__rec_status__##f1##__VAL(R_SYNC_SERIAL3_STATUS_, rec_status_, v1) << R_SYNC_SERIAL3_STATUS__rec_status__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__tr_empty__##f2##__VAL(R_SYNC_SERIAL3_STATUS_, tr_empty_, v2) << R_SYNC_SERIAL3_STATUS__tr_empty__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__tr_ready__##f3##__VAL(R_SYNC_SERIAL3_STATUS_, tr_ready_, v3) << R_SYNC_SERIAL3_STATUS__tr_ready__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__pin_1__##f4##__VAL(R_SYNC_SERIAL3_STATUS_, pin_1_, v4) << R_SYNC_SERIAL3_STATUS__pin_1__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__pin_0__##f5##__VAL(R_SYNC_SERIAL3_STATUS_, pin_0_, v5) << R_SYNC_SERIAL3_STATUS__pin_0__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__underflow__##f6##__VAL(R_SYNC_SERIAL3_STATUS_, underflow_, v6) << R_SYNC_SERIAL3_STATUS__underflow__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__overrun__##f7##__VAL(R_SYNC_SERIAL3_STATUS_, overrun_, v7) << R_SYNC_SERIAL3_STATUS__overrun__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__data_avail__##f8##__VAL(R_SYNC_SERIAL3_STATUS_, data_avail_, v8) << R_SYNC_SERIAL3_STATUS__data_avail__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__data__##f9##__VAL(R_SYNC_SERIAL3_STATUS_, data_, v9) << R_SYNC_SERIAL3_STATUS__data__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_SYNC_SERIAL3_STATUS__rec_status__##f1_##_VAL(R_SYNC_SERIAL3_STATUS_, rec_status_, v1) << R_SYNC_SERIAL3_STATUS__rec_status__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__tr_empty__##f2_##_VAL(R_SYNC_SERIAL3_STATUS_, tr_empty_, v2) << R_SYNC_SERIAL3_STATUS__tr_empty__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__tr_ready__##f3_##_VAL(R_SYNC_SERIAL3_STATUS_, tr_ready_, v3) << R_SYNC_SERIAL3_STATUS__tr_ready__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__pin_1__##f4_##_VAL(R_SYNC_SERIAL3_STATUS_, pin_1_, v4) << R_SYNC_SERIAL3_STATUS__pin_1__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__pin_0__##f5_##_VAL(R_SYNC_SERIAL3_STATUS_, pin_0_, v5) << R_SYNC_SERIAL3_STATUS__pin_0__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__underflow__##f6_##_VAL(R_SYNC_SERIAL3_STATUS_, underflow_, v6) << R_SYNC_SERIAL3_STATUS__underflow__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__overrun__##f7_##_VAL(R_SYNC_SERIAL3_STATUS_, overrun_, v7) << R_SYNC_SERIAL3_STATUS__overrun__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__data_avail__##f8_##_VAL(R_SYNC_SERIAL3_STATUS_, data_avail_, v8) << R_SYNC_SERIAL3_STATUS__data_avail__BITNR) | \
- (R_SYNC_SERIAL3_STATUS__data__##f9_##_VAL(R_SYNC_SERIAL3_STATUS_, data_, v9) << R_SYNC_SERIAL3_STATUS__data__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL3_TR_BYTE
- * - type: WO
- * - addr: 0xb000007c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL3_TR_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL3_TR_BYTE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL3_TR_BYTE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL3_TR_BYTE(f1,v1) ( \
- *R_SYNC_SERIAL3_TR_BYTE__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL3_TR_BYTE_) \
- REG_VAL__R_SYNC_SERIAL3_TR_BYTE_(f1##_,v1) \
- ), \
- R_SYNC_SERIAL3_TR_BYTE__WRITE(R_SYNC_SERIAL3_TR_BYTE__ADDR, *R_SYNC_SERIAL3_TR_BYTE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL3_TR_BYTE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL3_TR_BYTE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL3_TR_BYTE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL3_TR_BYTE__SHADOW(f1,v1) ( \
- *R_SYNC_SERIAL3_TR_BYTE__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL3_TR_BYTE_) \
- REG_VAL__R_SYNC_SERIAL3_TR_BYTE_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL3_TR_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL3_TR_BYTE(f1,v1) ( \
- (R_SYNC_SERIAL3_TR_BYTE__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_TR_BYTE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_TR_BYTE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_TR_BYTE(f1,v1) ( \
- (R_SYNC_SERIAL3_TR_BYTE__data_out__##f1##__VAL(R_SYNC_SERIAL3_TR_BYTE_, data_out_, v1) << R_SYNC_SERIAL3_TR_BYTE__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_TR_BYTE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_TR_BYTE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_TR_BYTE_(f1_,v1) ( \
- (R_SYNC_SERIAL3_TR_BYTE__data_out__##f1_##_VAL(R_SYNC_SERIAL3_TR_BYTE_, data_out_, v1) << R_SYNC_SERIAL3_TR_BYTE__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL3_TR_DATA
- * - type: WO
- * - addr: 0xb000007c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL3_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL3_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL3_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL3_TR_DATA(f1,v1) ( \
- *R_SYNC_SERIAL3_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL3_TR_DATA_) \
- REG_VAL__R_SYNC_SERIAL3_TR_DATA_(f1##_,v1) \
- ), \
- R_SYNC_SERIAL3_TR_DATA__WRITE(R_SYNC_SERIAL3_TR_DATA__ADDR, *R_SYNC_SERIAL3_TR_DATA__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL3_TR_DATA__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL3_TR_DATA.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL3_TR_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL3_TR_DATA__SHADOW(f1,v1) ( \
- *R_SYNC_SERIAL3_TR_DATA__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL3_TR_DATA_) \
- REG_VAL__R_SYNC_SERIAL3_TR_DATA_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL3_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL3_TR_DATA(f1,v1) ( \
- (R_SYNC_SERIAL3_TR_DATA__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_TR_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_TR_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_TR_DATA(f1,v1) ( \
- (R_SYNC_SERIAL3_TR_DATA__data_out__##f1##__VAL(R_SYNC_SERIAL3_TR_DATA_, data_out_, v1) << R_SYNC_SERIAL3_TR_DATA__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_TR_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_TR_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_TR_DATA_(f1_,v1) ( \
- (R_SYNC_SERIAL3_TR_DATA__data_out__##f1_##_VAL(R_SYNC_SERIAL3_TR_DATA_, data_out_, v1) << R_SYNC_SERIAL3_TR_DATA__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL3_TR_WORD
- * - type: WO
- * - addr: 0xb000007c
- * - group: Syncrounous serial port registers
- */
-
-#if USE_GROUP__Syncrounous_serial_port_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL3_TR_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL3_TR_WORD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL3_TR_WORD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL3_TR_WORD(f1,v1) ( \
- *R_SYNC_SERIAL3_TR_WORD__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL3_TR_WORD_) \
- REG_VAL__R_SYNC_SERIAL3_TR_WORD_(f1##_,v1) \
- ), \
- R_SYNC_SERIAL3_TR_WORD__WRITE(R_SYNC_SERIAL3_TR_WORD__ADDR, *R_SYNC_SERIAL3_TR_WORD__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL3_TR_WORD__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL3_TR_WORD.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL3_TR_WORD.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL3_TR_WORD__SHADOW(f1,v1) ( \
- *R_SYNC_SERIAL3_TR_WORD__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL3_TR_WORD_) \
- REG_VAL__R_SYNC_SERIAL3_TR_WORD_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL3_TR_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL3_TR_WORD(f1,v1) ( \
- (R_SYNC_SERIAL3_TR_WORD__data_out__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_TR_WORD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_TR_WORD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_TR_WORD(f1,v1) ( \
- (R_SYNC_SERIAL3_TR_WORD__data_out__##f1##__VAL(R_SYNC_SERIAL3_TR_WORD_, data_out_, v1) << R_SYNC_SERIAL3_TR_WORD__data_out__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL3_TR_WORD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL3_TR_WORD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL3_TR_WORD_(f1_,v1) ( \
- (R_SYNC_SERIAL3_TR_WORD__data_out__##f1_##_VAL(R_SYNC_SERIAL3_TR_WORD_, data_out_, v1) << R_SYNC_SERIAL3_TR_WORD__data_out__BITNR) \
-)
-
-#endif
-
-/*
- * R_SYNC_SERIAL_PRESCALE
- * - type: WO
- * - addr: 0xb00000f4
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL_PRESCALE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_SYNC_SERIAL_PRESCALE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL_PRESCALE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SYNC_SERIAL_PRESCALE__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL_PRESCALE_) \
- REG_VAL__R_SYNC_SERIAL_PRESCALE_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ), \
- R_SYNC_SERIAL_PRESCALE__WRITE(R_SYNC_SERIAL_PRESCALE__ADDR, *R_SYNC_SERIAL_PRESCALE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_SYNC_SERIAL_PRESCALE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_SYNC_SERIAL_PRESCALE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_SYNC_SERIAL_PRESCALE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_SYNC_SERIAL_PRESCALE__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- *R_SYNC_SERIAL_PRESCALE__SADDR = ( \
- REG_INITIATED(R_SYNC_SERIAL_PRESCALE_) \
- REG_VAL__R_SYNC_SERIAL_PRESCALE_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_SYNC_SERIAL_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_SYNC_SERIAL_PRESCALE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SYNC_SERIAL_PRESCALE__clk_sel_u3__##f1##__MASK & REG__##v1) | \
- (R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__##f2##__MASK & REG__##v2) | \
- (R_SYNC_SERIAL_PRESCALE__clk_sel_u1__##f3##__MASK & REG__##v3) | \
- (R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__##f4##__MASK & REG__##v4) | \
- (R_SYNC_SERIAL_PRESCALE__prescaler__##f5##__MASK & REG__##v5) | \
- (R_SYNC_SERIAL_PRESCALE__warp_mode__##f6##__MASK & REG__##v6) | \
- (R_SYNC_SERIAL_PRESCALE__frame_rate__##f7##__MASK & REG__##v7) | \
- (R_SYNC_SERIAL_PRESCALE__word_rate__##f8##__MASK & REG__##v8) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL_PRESCALE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL_PRESCALE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8) ( \
- (R_SYNC_SERIAL_PRESCALE__clk_sel_u3__##f1##__VAL(R_SYNC_SERIAL_PRESCALE_, clk_sel_u3_, v1) << R_SYNC_SERIAL_PRESCALE__clk_sel_u3__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__##f2##__VAL(R_SYNC_SERIAL_PRESCALE_, word_stb_sel_u3_, v2) << R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__clk_sel_u1__##f3##__VAL(R_SYNC_SERIAL_PRESCALE_, clk_sel_u1_, v3) << R_SYNC_SERIAL_PRESCALE__clk_sel_u1__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__##f4##__VAL(R_SYNC_SERIAL_PRESCALE_, word_stb_sel_u1_, v4) << R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__prescaler__##f5##__VAL(R_SYNC_SERIAL_PRESCALE_, prescaler_, v5) << R_SYNC_SERIAL_PRESCALE__prescaler__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__warp_mode__##f6##__VAL(R_SYNC_SERIAL_PRESCALE_, warp_mode_, v6) << R_SYNC_SERIAL_PRESCALE__warp_mode__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__frame_rate__##f7##__VAL(R_SYNC_SERIAL_PRESCALE_, frame_rate_, v7) << R_SYNC_SERIAL_PRESCALE__frame_rate__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__word_rate__##f8##__VAL(R_SYNC_SERIAL_PRESCALE_, word_rate_, v8) << R_SYNC_SERIAL_PRESCALE__word_rate__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_SYNC_SERIAL_PRESCALE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_SYNC_SERIAL_PRESCALE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_SYNC_SERIAL_PRESCALE_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8) ( \
- (R_SYNC_SERIAL_PRESCALE__clk_sel_u3__##f1_##_VAL(R_SYNC_SERIAL_PRESCALE_, clk_sel_u3_, v1) << R_SYNC_SERIAL_PRESCALE__clk_sel_u3__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__##f2_##_VAL(R_SYNC_SERIAL_PRESCALE_, word_stb_sel_u3_, v2) << R_SYNC_SERIAL_PRESCALE__word_stb_sel_u3__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__clk_sel_u1__##f3_##_VAL(R_SYNC_SERIAL_PRESCALE_, clk_sel_u1_, v3) << R_SYNC_SERIAL_PRESCALE__clk_sel_u1__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__##f4_##_VAL(R_SYNC_SERIAL_PRESCALE_, word_stb_sel_u1_, v4) << R_SYNC_SERIAL_PRESCALE__word_stb_sel_u1__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__prescaler__##f5_##_VAL(R_SYNC_SERIAL_PRESCALE_, prescaler_, v5) << R_SYNC_SERIAL_PRESCALE__prescaler__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__warp_mode__##f6_##_VAL(R_SYNC_SERIAL_PRESCALE_, warp_mode_, v6) << R_SYNC_SERIAL_PRESCALE__warp_mode__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__frame_rate__##f7_##_VAL(R_SYNC_SERIAL_PRESCALE_, frame_rate_, v7) << R_SYNC_SERIAL_PRESCALE__frame_rate__BITNR) | \
- (R_SYNC_SERIAL_PRESCALE__word_rate__##f8_##_VAL(R_SYNC_SERIAL_PRESCALE_, word_rate_, v8) << R_SYNC_SERIAL_PRESCALE__word_rate__BITNR) \
-)
-
-#endif
-
-/*
- * R_TEST_MODE
- * - type: WO
- * - addr: 0xb00000fc
- * - group: Test mode registers
- */
-
-#if USE_GROUP__Test_mode_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TEST_MODE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TEST_MODE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_TEST_MODE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TEST_MODE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16) ( \
- *R_TEST_MODE__SADDR = ( \
- REG_INITIATED(R_TEST_MODE_) \
- REG_VAL__R_TEST_MODE_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16) \
- ), \
- R_TEST_MODE__WRITE(R_TEST_MODE__ADDR, *R_TEST_MODE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TEST_MODE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TEST_MODE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_TEST_MODE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TEST_MODE__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16) ( \
- *R_TEST_MODE__SADDR = ( \
- REG_INITIATED(R_TEST_MODE_) \
- REG_VAL__R_TEST_MODE_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TEST_MODE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TEST_MODE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16) ( \
- (R_TEST_MODE__single_step__##f1##__MASK & REG__##v1) | \
- (R_TEST_MODE__step_wr__##f2##__MASK & REG__##v2) | \
- (R_TEST_MODE__step_rd__##f3##__MASK & REG__##v3) | \
- (R_TEST_MODE__step_fetch__##f4##__MASK & REG__##v4) | \
- (R_TEST_MODE__mmu_test__##f5##__MASK & REG__##v5) | \
- (R_TEST_MODE__usb_test__##f6##__MASK & REG__##v6) | \
- (R_TEST_MODE__scsi_timer_test__##f7##__MASK & REG__##v7) | \
- (R_TEST_MODE__backoff__##f8##__MASK & REG__##v8) | \
- (R_TEST_MODE__snmp_test__##f9##__MASK & REG__##v9) | \
- (R_TEST_MODE__snmp_inc__##f10##__MASK & REG__##v10) | \
- (R_TEST_MODE__ser_loop__##f11##__MASK & REG__##v11) | \
- (R_TEST_MODE__baudrate__##f12##__MASK & REG__##v12) | \
- (R_TEST_MODE__timer__##f13##__MASK & REG__##v13) | \
- (R_TEST_MODE__cache_test__##f14##__MASK & REG__##v14) | \
- (R_TEST_MODE__tag_test__##f15##__MASK & REG__##v15) | \
- (R_TEST_MODE__cache_enable__##f16##__MASK & REG__##v16) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TEST_MODE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TEST_MODE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TEST_MODE(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16) ( \
- (R_TEST_MODE__single_step__##f1##__VAL(R_TEST_MODE_, single_step_, v1) << R_TEST_MODE__single_step__BITNR) | \
- (R_TEST_MODE__step_wr__##f2##__VAL(R_TEST_MODE_, step_wr_, v2) << R_TEST_MODE__step_wr__BITNR) | \
- (R_TEST_MODE__step_rd__##f3##__VAL(R_TEST_MODE_, step_rd_, v3) << R_TEST_MODE__step_rd__BITNR) | \
- (R_TEST_MODE__step_fetch__##f4##__VAL(R_TEST_MODE_, step_fetch_, v4) << R_TEST_MODE__step_fetch__BITNR) | \
- (R_TEST_MODE__mmu_test__##f5##__VAL(R_TEST_MODE_, mmu_test_, v5) << R_TEST_MODE__mmu_test__BITNR) | \
- (R_TEST_MODE__usb_test__##f6##__VAL(R_TEST_MODE_, usb_test_, v6) << R_TEST_MODE__usb_test__BITNR) | \
- (R_TEST_MODE__scsi_timer_test__##f7##__VAL(R_TEST_MODE_, scsi_timer_test_, v7) << R_TEST_MODE__scsi_timer_test__BITNR) | \
- (R_TEST_MODE__backoff__##f8##__VAL(R_TEST_MODE_, backoff_, v8) << R_TEST_MODE__backoff__BITNR) | \
- (R_TEST_MODE__snmp_test__##f9##__VAL(R_TEST_MODE_, snmp_test_, v9) << R_TEST_MODE__snmp_test__BITNR) | \
- (R_TEST_MODE__snmp_inc__##f10##__VAL(R_TEST_MODE_, snmp_inc_, v10) << R_TEST_MODE__snmp_inc__BITNR) | \
- (R_TEST_MODE__ser_loop__##f11##__VAL(R_TEST_MODE_, ser_loop_, v11) << R_TEST_MODE__ser_loop__BITNR) | \
- (R_TEST_MODE__baudrate__##f12##__VAL(R_TEST_MODE_, baudrate_, v12) << R_TEST_MODE__baudrate__BITNR) | \
- (R_TEST_MODE__timer__##f13##__VAL(R_TEST_MODE_, timer_, v13) << R_TEST_MODE__timer__BITNR) | \
- (R_TEST_MODE__cache_test__##f14##__VAL(R_TEST_MODE_, cache_test_, v14) << R_TEST_MODE__cache_test__BITNR) | \
- (R_TEST_MODE__tag_test__##f15##__VAL(R_TEST_MODE_, tag_test_, v15) << R_TEST_MODE__tag_test__BITNR) | \
- (R_TEST_MODE__cache_enable__##f16##__VAL(R_TEST_MODE_, cache_enable_, v16) << R_TEST_MODE__cache_enable__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TEST_MODE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TEST_MODE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TEST_MODE_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16) ( \
- (R_TEST_MODE__single_step__##f1_##_VAL(R_TEST_MODE_, single_step_, v1) << R_TEST_MODE__single_step__BITNR) | \
- (R_TEST_MODE__step_wr__##f2_##_VAL(R_TEST_MODE_, step_wr_, v2) << R_TEST_MODE__step_wr__BITNR) | \
- (R_TEST_MODE__step_rd__##f3_##_VAL(R_TEST_MODE_, step_rd_, v3) << R_TEST_MODE__step_rd__BITNR) | \
- (R_TEST_MODE__step_fetch__##f4_##_VAL(R_TEST_MODE_, step_fetch_, v4) << R_TEST_MODE__step_fetch__BITNR) | \
- (R_TEST_MODE__mmu_test__##f5_##_VAL(R_TEST_MODE_, mmu_test_, v5) << R_TEST_MODE__mmu_test__BITNR) | \
- (R_TEST_MODE__usb_test__##f6_##_VAL(R_TEST_MODE_, usb_test_, v6) << R_TEST_MODE__usb_test__BITNR) | \
- (R_TEST_MODE__scsi_timer_test__##f7_##_VAL(R_TEST_MODE_, scsi_timer_test_, v7) << R_TEST_MODE__scsi_timer_test__BITNR) | \
- (R_TEST_MODE__backoff__##f8_##_VAL(R_TEST_MODE_, backoff_, v8) << R_TEST_MODE__backoff__BITNR) | \
- (R_TEST_MODE__snmp_test__##f9_##_VAL(R_TEST_MODE_, snmp_test_, v9) << R_TEST_MODE__snmp_test__BITNR) | \
- (R_TEST_MODE__snmp_inc__##f10_##_VAL(R_TEST_MODE_, snmp_inc_, v10) << R_TEST_MODE__snmp_inc__BITNR) | \
- (R_TEST_MODE__ser_loop__##f11_##_VAL(R_TEST_MODE_, ser_loop_, v11) << R_TEST_MODE__ser_loop__BITNR) | \
- (R_TEST_MODE__baudrate__##f12_##_VAL(R_TEST_MODE_, baudrate_, v12) << R_TEST_MODE__baudrate__BITNR) | \
- (R_TEST_MODE__timer__##f13_##_VAL(R_TEST_MODE_, timer_, v13) << R_TEST_MODE__timer__BITNR) | \
- (R_TEST_MODE__cache_test__##f14_##_VAL(R_TEST_MODE_, cache_test_, v14) << R_TEST_MODE__cache_test__BITNR) | \
- (R_TEST_MODE__tag_test__##f15_##_VAL(R_TEST_MODE_, tag_test_, v15) << R_TEST_MODE__tag_test__BITNR) | \
- (R_TEST_MODE__cache_enable__##f16_##_VAL(R_TEST_MODE_, cache_enable_, v16) << R_TEST_MODE__cache_enable__BITNR) \
-)
-
-#endif
-
-/*
- * R_TIMER01_DATA
- * - type: RO
- * - addr: 0xb0000022
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TIMER01_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TIMER01_DATA(f1,v1) ( \
- (R_TIMER01_DATA__count__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER01_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER01_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER01_DATA(f1,v1) ( \
- (R_TIMER01_DATA__count__##f1##__VAL(R_TIMER01_DATA_, count_, v1) << R_TIMER01_DATA__count__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER01_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER01_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER01_DATA_(f1_,v1) ( \
- (R_TIMER01_DATA__count__##f1_##_VAL(R_TIMER01_DATA_, count_, v1) << R_TIMER01_DATA__count__BITNR) \
-)
-
-#endif
-
-/*
- * R_TIMER0_DATA
- * - type: RO
- * - addr: 0xb0000022
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TIMER0_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TIMER0_DATA(f1,v1) ( \
- (R_TIMER0_DATA__count__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER0_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER0_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER0_DATA(f1,v1) ( \
- (R_TIMER0_DATA__count__##f1##__VAL(R_TIMER0_DATA_, count_, v1) << R_TIMER0_DATA__count__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER0_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER0_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER0_DATA_(f1_,v1) ( \
- (R_TIMER0_DATA__count__##f1_##_VAL(R_TIMER0_DATA_, count_, v1) << R_TIMER0_DATA__count__BITNR) \
-)
-
-#endif
-
-/*
- * R_TIMER1_DATA
- * - type: RO
- * - addr: 0xb0000023
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TIMER1_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TIMER1_DATA(f1,v1) ( \
- (R_TIMER1_DATA__count__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER1_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER1_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER1_DATA(f1,v1) ( \
- (R_TIMER1_DATA__count__##f1##__VAL(R_TIMER1_DATA_, count_, v1) << R_TIMER1_DATA__count__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER1_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER1_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER1_DATA_(f1_,v1) ( \
- (R_TIMER1_DATA__count__##f1_##_VAL(R_TIMER1_DATA_, count_, v1) << R_TIMER1_DATA__count__BITNR) \
-)
-
-#endif
-
-/*
- * R_TIMER_CTRL
- * - type: WO
- * - addr: 0xb0000020
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TIMER_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TIMER_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_TIMER_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TIMER_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_TIMER_CTRL__SADDR = ( \
- REG_INITIATED(R_TIMER_CTRL_) \
- REG_VAL__R_TIMER_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ), \
- R_TIMER_CTRL__WRITE(R_TIMER_CTRL__ADDR, *R_TIMER_CTRL__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TIMER_CTRL__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TIMER_CTRL.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_TIMER_CTRL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TIMER_CTRL__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_TIMER_CTRL__SADDR = ( \
- REG_INITIATED(R_TIMER_CTRL_) \
- REG_VAL__R_TIMER_CTRL_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TIMER_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TIMER_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_TIMER_CTRL__timerdiv1__##f1##__MASK & REG__##v1) | \
- (R_TIMER_CTRL__timerdiv0__##f2##__MASK & REG__##v2) | \
- (R_TIMER_CTRL__presc_timer1__##f3##__MASK & REG__##v3) | \
- (R_TIMER_CTRL__i1__##f4##__MASK & REG__##v4) | \
- (R_TIMER_CTRL__tm1__##f5##__MASK & REG__##v5) | \
- (R_TIMER_CTRL__clksel1__##f6##__MASK & REG__##v6) | \
- (R_TIMER_CTRL__presc_ext__##f7##__MASK & REG__##v7) | \
- (R_TIMER_CTRL__i0__##f8##__MASK & REG__##v8) | \
- (R_TIMER_CTRL__tm0__##f9##__MASK & REG__##v9) | \
- (R_TIMER_CTRL__clksel0__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER_CTRL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER_CTRL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER_CTRL(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_TIMER_CTRL__timerdiv1__##f1##__VAL(R_TIMER_CTRL_, timerdiv1_, v1) << R_TIMER_CTRL__timerdiv1__BITNR) | \
- (R_TIMER_CTRL__timerdiv0__##f2##__VAL(R_TIMER_CTRL_, timerdiv0_, v2) << R_TIMER_CTRL__timerdiv0__BITNR) | \
- (R_TIMER_CTRL__presc_timer1__##f3##__VAL(R_TIMER_CTRL_, presc_timer1_, v3) << R_TIMER_CTRL__presc_timer1__BITNR) | \
- (R_TIMER_CTRL__i1__##f4##__VAL(R_TIMER_CTRL_, i1_, v4) << R_TIMER_CTRL__i1__BITNR) | \
- (R_TIMER_CTRL__tm1__##f5##__VAL(R_TIMER_CTRL_, tm1_, v5) << R_TIMER_CTRL__tm1__BITNR) | \
- (R_TIMER_CTRL__clksel1__##f6##__VAL(R_TIMER_CTRL_, clksel1_, v6) << R_TIMER_CTRL__clksel1__BITNR) | \
- (R_TIMER_CTRL__presc_ext__##f7##__VAL(R_TIMER_CTRL_, presc_ext_, v7) << R_TIMER_CTRL__presc_ext__BITNR) | \
- (R_TIMER_CTRL__i0__##f8##__VAL(R_TIMER_CTRL_, i0_, v8) << R_TIMER_CTRL__i0__BITNR) | \
- (R_TIMER_CTRL__tm0__##f9##__VAL(R_TIMER_CTRL_, tm0_, v9) << R_TIMER_CTRL__tm0__BITNR) | \
- (R_TIMER_CTRL__clksel0__##f10##__VAL(R_TIMER_CTRL_, clksel0_, v10) << R_TIMER_CTRL__clksel0__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER_CTRL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER_CTRL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER_CTRL_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_TIMER_CTRL__timerdiv1__##f1_##_VAL(R_TIMER_CTRL_, timerdiv1_, v1) << R_TIMER_CTRL__timerdiv1__BITNR) | \
- (R_TIMER_CTRL__timerdiv0__##f2_##_VAL(R_TIMER_CTRL_, timerdiv0_, v2) << R_TIMER_CTRL__timerdiv0__BITNR) | \
- (R_TIMER_CTRL__presc_timer1__##f3_##_VAL(R_TIMER_CTRL_, presc_timer1_, v3) << R_TIMER_CTRL__presc_timer1__BITNR) | \
- (R_TIMER_CTRL__i1__##f4_##_VAL(R_TIMER_CTRL_, i1_, v4) << R_TIMER_CTRL__i1__BITNR) | \
- (R_TIMER_CTRL__tm1__##f5_##_VAL(R_TIMER_CTRL_, tm1_, v5) << R_TIMER_CTRL__tm1__BITNR) | \
- (R_TIMER_CTRL__clksel1__##f6_##_VAL(R_TIMER_CTRL_, clksel1_, v6) << R_TIMER_CTRL__clksel1__BITNR) | \
- (R_TIMER_CTRL__presc_ext__##f7_##_VAL(R_TIMER_CTRL_, presc_ext_, v7) << R_TIMER_CTRL__presc_ext__BITNR) | \
- (R_TIMER_CTRL__i0__##f8_##_VAL(R_TIMER_CTRL_, i0_, v8) << R_TIMER_CTRL__i0__BITNR) | \
- (R_TIMER_CTRL__tm0__##f9_##_VAL(R_TIMER_CTRL_, tm0_, v9) << R_TIMER_CTRL__tm0__BITNR) | \
- (R_TIMER_CTRL__clksel0__##f10_##_VAL(R_TIMER_CTRL_, clksel0_, v10) << R_TIMER_CTRL__clksel0__BITNR) \
-)
-
-#endif
-
-/*
- * R_TIMER_DATA
- * - type: RO
- * - addr: 0xb0000020
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TIMER_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TIMER_DATA(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_TIMER_DATA__timer1__##f1##__MASK & REG__##v1) | \
- (R_TIMER_DATA__timer0__##f2##__MASK & REG__##v2) | \
- (R_TIMER_DATA__clkdiv_high__##f3##__MASK & REG__##v3) | \
- (R_TIMER_DATA__clkdiv_low__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER_DATA(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_TIMER_DATA__timer1__##f1##__VAL(R_TIMER_DATA_, timer1_, v1) << R_TIMER_DATA__timer1__BITNR) | \
- (R_TIMER_DATA__timer0__##f2##__VAL(R_TIMER_DATA_, timer0_, v2) << R_TIMER_DATA__timer0__BITNR) | \
- (R_TIMER_DATA__clkdiv_high__##f3##__VAL(R_TIMER_DATA_, clkdiv_high_, v3) << R_TIMER_DATA__clkdiv_high__BITNR) | \
- (R_TIMER_DATA__clkdiv_low__##f4##__VAL(R_TIMER_DATA_, clkdiv_low_, v4) << R_TIMER_DATA__clkdiv_low__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_TIMER_DATA__timer1__##f1_##_VAL(R_TIMER_DATA_, timer1_, v1) << R_TIMER_DATA__timer1__BITNR) | \
- (R_TIMER_DATA__timer0__##f2_##_VAL(R_TIMER_DATA_, timer0_, v2) << R_TIMER_DATA__timer0__BITNR) | \
- (R_TIMER_DATA__clkdiv_high__##f3_##_VAL(R_TIMER_DATA_, clkdiv_high_, v3) << R_TIMER_DATA__clkdiv_high__BITNR) | \
- (R_TIMER_DATA__clkdiv_low__##f4_##_VAL(R_TIMER_DATA_, clkdiv_low_, v4) << R_TIMER_DATA__clkdiv_low__BITNR) \
-)
-
-#endif
-
-/*
- * R_TIMER_PRESCALE
- * - type: WO
- * - addr: 0xb00000f0
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TIMER_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TIMER_PRESCALE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_TIMER_PRESCALE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TIMER_PRESCALE(f1,v1) ( \
- *R_TIMER_PRESCALE__SADDR = ( \
- REG_INITIATED(R_TIMER_PRESCALE_) \
- REG_VAL__R_TIMER_PRESCALE_(f1##_,v1) \
- ), \
- R_TIMER_PRESCALE__WRITE(R_TIMER_PRESCALE__ADDR, *R_TIMER_PRESCALE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TIMER_PRESCALE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TIMER_PRESCALE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_TIMER_PRESCALE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TIMER_PRESCALE__SHADOW(f1,v1) ( \
- *R_TIMER_PRESCALE__SADDR = ( \
- REG_INITIATED(R_TIMER_PRESCALE_) \
- REG_VAL__R_TIMER_PRESCALE_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TIMER_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TIMER_PRESCALE(f1,v1) ( \
- (R_TIMER_PRESCALE__tim_presc__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER_PRESCALE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER_PRESCALE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER_PRESCALE(f1,v1) ( \
- (R_TIMER_PRESCALE__tim_presc__##f1##__VAL(R_TIMER_PRESCALE_, tim_presc_, v1) << R_TIMER_PRESCALE__tim_presc__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIMER_PRESCALE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIMER_PRESCALE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TIMER_PRESCALE_(f1_,v1) ( \
- (R_TIMER_PRESCALE__tim_presc__##f1_##_VAL(R_TIMER_PRESCALE_, tim_presc_, v1) << R_TIMER_PRESCALE__tim_presc__BITNR) \
-)
-
-#endif
-
-/*
- * R_TIM_PRESC_STATUS
- * - type: RO
- * - addr: 0xb00000f0
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TIM_PRESC_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TIM_PRESC_STATUS(f1,v1) ( \
- (R_TIM_PRESC_STATUS__tim_status__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIM_PRESC_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIM_PRESC_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TIM_PRESC_STATUS(f1,v1) ( \
- (R_TIM_PRESC_STATUS__tim_status__##f1##__VAL(R_TIM_PRESC_STATUS_, tim_status_, v1) << R_TIM_PRESC_STATUS__tim_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TIM_PRESC_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TIM_PRESC_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TIM_PRESC_STATUS_(f1_,v1) ( \
- (R_TIM_PRESC_STATUS__tim_status__##f1_##_VAL(R_TIM_PRESC_STATUS_, tim_status_, v1) << R_TIM_PRESC_STATUS__tim_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_TLB_HI
- * - type: RW
- * - addr: 0xb000025c
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TLB_HI
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TLB_HI.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_TLB_HI.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TLB_HI(f1,v1,f2,v2) ( \
- R_TLB_HI__WRITE(R_TLB_HI__ADDR, ( \
- REG_VAL__R_TLB_HI_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TLB_HI
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TLB_HI(f1,v1,f2,v2) ( \
- (R_TLB_HI__vpn__##f1##__MASK & REG__##v1) | \
- (R_TLB_HI__page_id__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TLB_HI
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TLB_HI.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TLB_HI(f1,v1,f2,v2) ( \
- (R_TLB_HI__vpn__##f1##__VAL(R_TLB_HI_, vpn_, v1) << R_TLB_HI__vpn__BITNR) | \
- (R_TLB_HI__page_id__##f2##__VAL(R_TLB_HI_, page_id_, v2) << R_TLB_HI__page_id__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TLB_HI_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TLB_HI.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TLB_HI_(f1_,v1,f2_,v2) ( \
- (R_TLB_HI__vpn__##f1_##_VAL(R_TLB_HI_, vpn_, v1) << R_TLB_HI__vpn__BITNR) | \
- (R_TLB_HI__page_id__##f2_##_VAL(R_TLB_HI_, page_id_, v2) << R_TLB_HI__page_id__BITNR) \
-)
-
-#endif
-
-/*
- * R_TLB_LO
- * - type: RW
- * - addr: 0xb0000258
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TLB_LO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TLB_LO.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_TLB_LO.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TLB_LO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- R_TLB_LO__WRITE(R_TLB_LO__ADDR, ( \
- REG_VAL__R_TLB_LO_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TLB_LO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TLB_LO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_TLB_LO__pfn__##f1##__MASK & REG__##v1) | \
- (R_TLB_LO__global__##f2##__MASK & REG__##v2) | \
- (R_TLB_LO__valid__##f3##__MASK & REG__##v3) | \
- (R_TLB_LO__kernel__##f4##__MASK & REG__##v4) | \
- (R_TLB_LO__we__##f5##__MASK & REG__##v5) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TLB_LO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TLB_LO.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TLB_LO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_TLB_LO__pfn__##f1##__VAL(R_TLB_LO_, pfn_, v1) << R_TLB_LO__pfn__BITNR) | \
- (R_TLB_LO__global__##f2##__VAL(R_TLB_LO_, global_, v2) << R_TLB_LO__global__BITNR) | \
- (R_TLB_LO__valid__##f3##__VAL(R_TLB_LO_, valid_, v3) << R_TLB_LO__valid__BITNR) | \
- (R_TLB_LO__kernel__##f4##__VAL(R_TLB_LO_, kernel_, v4) << R_TLB_LO__kernel__BITNR) | \
- (R_TLB_LO__we__##f5##__VAL(R_TLB_LO_, we_, v5) << R_TLB_LO__we__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TLB_LO_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TLB_LO.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TLB_LO_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5) ( \
- (R_TLB_LO__pfn__##f1_##_VAL(R_TLB_LO_, pfn_, v1) << R_TLB_LO__pfn__BITNR) | \
- (R_TLB_LO__global__##f2_##_VAL(R_TLB_LO_, global_, v2) << R_TLB_LO__global__BITNR) | \
- (R_TLB_LO__valid__##f3_##_VAL(R_TLB_LO_, valid_, v3) << R_TLB_LO__valid__BITNR) | \
- (R_TLB_LO__kernel__##f4_##_VAL(R_TLB_LO_, kernel_, v4) << R_TLB_LO__kernel__BITNR) | \
- (R_TLB_LO__we__##f5_##_VAL(R_TLB_LO_, we_, v5) << R_TLB_LO__we__BITNR) \
-)
-
-#endif
-
-/*
- * R_TLB_SELECT
- * - type: RW
- * - addr: 0xb0000254
- * - group: MMU registers
- */
-
-#if USE_GROUP__MMU_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_TLB_SELECT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_TLB_SELECT.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_TLB_SELECT.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_TLB_SELECT(f1,v1) ( \
- R_TLB_SELECT__WRITE(R_TLB_SELECT__ADDR, ( \
- REG_VAL__R_TLB_SELECT_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TLB_SELECT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TLB_SELECT(f1,v1) ( \
- (R_TLB_SELECT__index__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TLB_SELECT
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TLB_SELECT.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TLB_SELECT(f1,v1) ( \
- (R_TLB_SELECT__index__##f1##__VAL(R_TLB_SELECT_, index_, v1) << R_TLB_SELECT__index__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TLB_SELECT_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TLB_SELECT.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TLB_SELECT_(f1_,v1) ( \
- (R_TLB_SELECT__index__##f1_##_VAL(R_TLB_SELECT_, index_, v1) << R_TLB_SELECT__index__BITNR) \
-)
-
-#endif
-
-/*
- * R_TR_COUNTERS
- * - type: RO
- * - addr: 0xb00000a8
- * - group: Network interface registers
- */
-
-#if USE_GROUP__Network_interface_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_TR_COUNTERS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_TR_COUNTERS(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_TR_COUNTERS__deferred__##f1##__MASK & REG__##v1) | \
- (R_TR_COUNTERS__late_col__##f2##__MASK & REG__##v2) | \
- (R_TR_COUNTERS__multiple_col__##f3##__MASK & REG__##v3) | \
- (R_TR_COUNTERS__single_col__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TR_COUNTERS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TR_COUNTERS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_TR_COUNTERS(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_TR_COUNTERS__deferred__##f1##__VAL(R_TR_COUNTERS_, deferred_, v1) << R_TR_COUNTERS__deferred__BITNR) | \
- (R_TR_COUNTERS__late_col__##f2##__VAL(R_TR_COUNTERS_, late_col_, v2) << R_TR_COUNTERS__late_col__BITNR) | \
- (R_TR_COUNTERS__multiple_col__##f3##__VAL(R_TR_COUNTERS_, multiple_col_, v3) << R_TR_COUNTERS__multiple_col__BITNR) | \
- (R_TR_COUNTERS__single_col__##f4##__VAL(R_TR_COUNTERS_, single_col_, v4) << R_TR_COUNTERS__single_col__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_TR_COUNTERS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_TR_COUNTERS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_TR_COUNTERS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_TR_COUNTERS__deferred__##f1_##_VAL(R_TR_COUNTERS_, deferred_, v1) << R_TR_COUNTERS__deferred__BITNR) | \
- (R_TR_COUNTERS__late_col__##f2_##_VAL(R_TR_COUNTERS_, late_col_, v2) << R_TR_COUNTERS__late_col__BITNR) | \
- (R_TR_COUNTERS__multiple_col__##f3_##_VAL(R_TR_COUNTERS_, multiple_col_, v3) << R_TR_COUNTERS__multiple_col__BITNR) | \
- (R_TR_COUNTERS__single_col__##f4_##_VAL(R_TR_COUNTERS_, single_col_, v4) << R_TR_COUNTERS__single_col__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_COMMAND
- * - type: RW
- * - addr: 0xb0000201
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_COMMAND
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_COMMAND.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_COMMAND.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_COMMAND(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- R_USB_COMMAND__WRITE(R_USB_COMMAND__ADDR, ( \
- REG_VAL__R_USB_COMMAND_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_COMMAND
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_COMMAND(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_USB_COMMAND__port_sel__##f1##__MASK & REG__##v1) | \
- (R_USB_COMMAND__port_cmd__##f2##__MASK & REG__##v2) | \
- (R_USB_COMMAND__busy__##f3##__MASK & REG__##v3) | \
- (R_USB_COMMAND__ctrl_cmd__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_COMMAND
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_COMMAND.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_COMMAND(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_USB_COMMAND__port_sel__##f1##__VAL(R_USB_COMMAND_, port_sel_, v1) << R_USB_COMMAND__port_sel__BITNR) | \
- (R_USB_COMMAND__port_cmd__##f2##__VAL(R_USB_COMMAND_, port_cmd_, v2) << R_USB_COMMAND__port_cmd__BITNR) | \
- (R_USB_COMMAND__busy__##f3##__VAL(R_USB_COMMAND_, busy_, v3) << R_USB_COMMAND__busy__BITNR) | \
- (R_USB_COMMAND__ctrl_cmd__##f4##__VAL(R_USB_COMMAND_, ctrl_cmd_, v4) << R_USB_COMMAND__ctrl_cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_COMMAND_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_COMMAND.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_COMMAND_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_USB_COMMAND__port_sel__##f1_##_VAL(R_USB_COMMAND_, port_sel_, v1) << R_USB_COMMAND__port_sel__BITNR) | \
- (R_USB_COMMAND__port_cmd__##f2_##_VAL(R_USB_COMMAND_, port_cmd_, v2) << R_USB_COMMAND__port_cmd__BITNR) | \
- (R_USB_COMMAND__busy__##f3_##_VAL(R_USB_COMMAND_, busy_, v3) << R_USB_COMMAND__busy__BITNR) | \
- (R_USB_COMMAND__ctrl_cmd__##f4_##_VAL(R_USB_COMMAND_, ctrl_cmd_, v4) << R_USB_COMMAND__ctrl_cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_COMMAND_DEV
- * - type: RW
- * - addr: 0xb0000201
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_COMMAND_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_COMMAND_DEV.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_COMMAND_DEV.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_COMMAND_DEV(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- R_USB_COMMAND_DEV__WRITE(R_USB_COMMAND_DEV__ADDR, ( \
- REG_VAL__R_USB_COMMAND_DEV_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_COMMAND_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_COMMAND_DEV(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_USB_COMMAND_DEV__port_sel__##f1##__MASK & REG__##v1) | \
- (R_USB_COMMAND_DEV__port_cmd__##f2##__MASK & REG__##v2) | \
- (R_USB_COMMAND_DEV__busy__##f3##__MASK & REG__##v3) | \
- (R_USB_COMMAND_DEV__ctrl_cmd__##f4##__MASK & REG__##v4) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_COMMAND_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_COMMAND_DEV.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_COMMAND_DEV(f1,v1,f2,v2,f3,v3,f4,v4) ( \
- (R_USB_COMMAND_DEV__port_sel__##f1##__VAL(R_USB_COMMAND_DEV_, port_sel_, v1) << R_USB_COMMAND_DEV__port_sel__BITNR) | \
- (R_USB_COMMAND_DEV__port_cmd__##f2##__VAL(R_USB_COMMAND_DEV_, port_cmd_, v2) << R_USB_COMMAND_DEV__port_cmd__BITNR) | \
- (R_USB_COMMAND_DEV__busy__##f3##__VAL(R_USB_COMMAND_DEV_, busy_, v3) << R_USB_COMMAND_DEV__busy__BITNR) | \
- (R_USB_COMMAND_DEV__ctrl_cmd__##f4##__VAL(R_USB_COMMAND_DEV_, ctrl_cmd_, v4) << R_USB_COMMAND_DEV__ctrl_cmd__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_COMMAND_DEV_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_COMMAND_DEV.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_COMMAND_DEV_(f1_,v1,f2_,v2,f3_,v3,f4_,v4) ( \
- (R_USB_COMMAND_DEV__port_sel__##f1_##_VAL(R_USB_COMMAND_DEV_, port_sel_, v1) << R_USB_COMMAND_DEV__port_sel__BITNR) | \
- (R_USB_COMMAND_DEV__port_cmd__##f2_##_VAL(R_USB_COMMAND_DEV_, port_cmd_, v2) << R_USB_COMMAND_DEV__port_cmd__BITNR) | \
- (R_USB_COMMAND_DEV__busy__##f3_##_VAL(R_USB_COMMAND_DEV_, busy_, v3) << R_USB_COMMAND_DEV__busy__BITNR) | \
- (R_USB_COMMAND_DEV__ctrl_cmd__##f4_##_VAL(R_USB_COMMAND_DEV_, ctrl_cmd_, v4) << R_USB_COMMAND_DEV__ctrl_cmd__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_EPID_ATTN
- * - type: RO
- * - addr: 0xb0000224
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_EPID_ATTN
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_EPID_ATTN(f1,v1) ( \
- (R_USB_EPID_ATTN__value__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPID_ATTN
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPID_ATTN.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPID_ATTN(f1,v1) ( \
- (R_USB_EPID_ATTN__value__##f1##__VAL(R_USB_EPID_ATTN_, value_, v1) << R_USB_EPID_ATTN__value__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPID_ATTN_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPID_ATTN.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPID_ATTN_(f1_,v1) ( \
- (R_USB_EPID_ATTN__value__##f1_##_VAL(R_USB_EPID_ATTN_, value_, v1) << R_USB_EPID_ATTN__value__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_EPT_DATA
- * - type: RW
- * - addr: 0xb000021c
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_EPT_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_EPT_DATA.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_EPT_DATA.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_EPT_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- R_USB_EPT_DATA__WRITE(R_USB_EPT_DATA__ADDR, ( \
- REG_VAL__R_USB_EPT_DATA_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_EPT_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_EPT_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_USB_EPT_DATA__valid__##f1##__MASK & REG__##v1) | \
- (R_USB_EPT_DATA__hold__##f2##__MASK & REG__##v2) | \
- (R_USB_EPT_DATA__error_count_in__##f3##__MASK & REG__##v3) | \
- (R_USB_EPT_DATA__t_in__##f4##__MASK & REG__##v4) | \
- (R_USB_EPT_DATA__low_speed__##f5##__MASK & REG__##v5) | \
- (R_USB_EPT_DATA__port__##f6##__MASK & REG__##v6) | \
- (R_USB_EPT_DATA__error_code__##f7##__MASK & REG__##v7) | \
- (R_USB_EPT_DATA__t_out__##f8##__MASK & REG__##v8) | \
- (R_USB_EPT_DATA__error_count_out__##f9##__MASK & REG__##v9) | \
- (R_USB_EPT_DATA__max_len__##f10##__MASK & REG__##v10) | \
- (R_USB_EPT_DATA__ep__##f11##__MASK & REG__##v11) | \
- (R_USB_EPT_DATA__dev__##f12##__MASK & REG__##v12) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPT_DATA
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPT_DATA.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPT_DATA(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_USB_EPT_DATA__valid__##f1##__VAL(R_USB_EPT_DATA_, valid_, v1) << R_USB_EPT_DATA__valid__BITNR) | \
- (R_USB_EPT_DATA__hold__##f2##__VAL(R_USB_EPT_DATA_, hold_, v2) << R_USB_EPT_DATA__hold__BITNR) | \
- (R_USB_EPT_DATA__error_count_in__##f3##__VAL(R_USB_EPT_DATA_, error_count_in_, v3) << R_USB_EPT_DATA__error_count_in__BITNR) | \
- (R_USB_EPT_DATA__t_in__##f4##__VAL(R_USB_EPT_DATA_, t_in_, v4) << R_USB_EPT_DATA__t_in__BITNR) | \
- (R_USB_EPT_DATA__low_speed__##f5##__VAL(R_USB_EPT_DATA_, low_speed_, v5) << R_USB_EPT_DATA__low_speed__BITNR) | \
- (R_USB_EPT_DATA__port__##f6##__VAL(R_USB_EPT_DATA_, port_, v6) << R_USB_EPT_DATA__port__BITNR) | \
- (R_USB_EPT_DATA__error_code__##f7##__VAL(R_USB_EPT_DATA_, error_code_, v7) << R_USB_EPT_DATA__error_code__BITNR) | \
- (R_USB_EPT_DATA__t_out__##f8##__VAL(R_USB_EPT_DATA_, t_out_, v8) << R_USB_EPT_DATA__t_out__BITNR) | \
- (R_USB_EPT_DATA__error_count_out__##f9##__VAL(R_USB_EPT_DATA_, error_count_out_, v9) << R_USB_EPT_DATA__error_count_out__BITNR) | \
- (R_USB_EPT_DATA__max_len__##f10##__VAL(R_USB_EPT_DATA_, max_len_, v10) << R_USB_EPT_DATA__max_len__BITNR) | \
- (R_USB_EPT_DATA__ep__##f11##__VAL(R_USB_EPT_DATA_, ep_, v11) << R_USB_EPT_DATA__ep__BITNR) | \
- (R_USB_EPT_DATA__dev__##f12##__VAL(R_USB_EPT_DATA_, dev_, v12) << R_USB_EPT_DATA__dev__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPT_DATA_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPT_DATA.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPT_DATA_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12) ( \
- (R_USB_EPT_DATA__valid__##f1_##_VAL(R_USB_EPT_DATA_, valid_, v1) << R_USB_EPT_DATA__valid__BITNR) | \
- (R_USB_EPT_DATA__hold__##f2_##_VAL(R_USB_EPT_DATA_, hold_, v2) << R_USB_EPT_DATA__hold__BITNR) | \
- (R_USB_EPT_DATA__error_count_in__##f3_##_VAL(R_USB_EPT_DATA_, error_count_in_, v3) << R_USB_EPT_DATA__error_count_in__BITNR) | \
- (R_USB_EPT_DATA__t_in__##f4_##_VAL(R_USB_EPT_DATA_, t_in_, v4) << R_USB_EPT_DATA__t_in__BITNR) | \
- (R_USB_EPT_DATA__low_speed__##f5_##_VAL(R_USB_EPT_DATA_, low_speed_, v5) << R_USB_EPT_DATA__low_speed__BITNR) | \
- (R_USB_EPT_DATA__port__##f6_##_VAL(R_USB_EPT_DATA_, port_, v6) << R_USB_EPT_DATA__port__BITNR) | \
- (R_USB_EPT_DATA__error_code__##f7_##_VAL(R_USB_EPT_DATA_, error_code_, v7) << R_USB_EPT_DATA__error_code__BITNR) | \
- (R_USB_EPT_DATA__t_out__##f8_##_VAL(R_USB_EPT_DATA_, t_out_, v8) << R_USB_EPT_DATA__t_out__BITNR) | \
- (R_USB_EPT_DATA__error_count_out__##f9_##_VAL(R_USB_EPT_DATA_, error_count_out_, v9) << R_USB_EPT_DATA__error_count_out__BITNR) | \
- (R_USB_EPT_DATA__max_len__##f10_##_VAL(R_USB_EPT_DATA_, max_len_, v10) << R_USB_EPT_DATA__max_len__BITNR) | \
- (R_USB_EPT_DATA__ep__##f11_##_VAL(R_USB_EPT_DATA_, ep_, v11) << R_USB_EPT_DATA__ep__BITNR) | \
- (R_USB_EPT_DATA__dev__##f12_##_VAL(R_USB_EPT_DATA_, dev_, v12) << R_USB_EPT_DATA__dev__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_EPT_DATA_DEV
- * - type: RW
- * - addr: 0xb000021c
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_EPT_DATA_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_EPT_DATA_DEV.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_EPT_DATA_DEV.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_EPT_DATA_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- R_USB_EPT_DATA_DEV__WRITE(R_USB_EPT_DATA_DEV__ADDR, ( \
- REG_VAL__R_USB_EPT_DATA_DEV_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_EPT_DATA_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_EPT_DATA_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_USB_EPT_DATA_DEV__valid__##f1##__MASK & REG__##v1) | \
- (R_USB_EPT_DATA_DEV__hold__##f2##__MASK & REG__##v2) | \
- (R_USB_EPT_DATA_DEV__stall__##f3##__MASK & REG__##v3) | \
- (R_USB_EPT_DATA_DEV__iso_resp__##f4##__MASK & REG__##v4) | \
- (R_USB_EPT_DATA_DEV__ctrl__##f5##__MASK & REG__##v5) | \
- (R_USB_EPT_DATA_DEV__iso__##f6##__MASK & REG__##v6) | \
- (R_USB_EPT_DATA_DEV__port__##f7##__MASK & REG__##v7) | \
- (R_USB_EPT_DATA_DEV__control_phase__##f8##__MASK & REG__##v8) | \
- (R_USB_EPT_DATA_DEV__t__##f9##__MASK & REG__##v9) | \
- (R_USB_EPT_DATA_DEV__max_len__##f10##__MASK & REG__##v10) | \
- (R_USB_EPT_DATA_DEV__ep__##f11##__MASK & REG__##v11) | \
- (R_USB_EPT_DATA_DEV__dev__##f12##__MASK & REG__##v12) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPT_DATA_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPT_DATA_DEV.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPT_DATA_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_USB_EPT_DATA_DEV__valid__##f1##__VAL(R_USB_EPT_DATA_DEV_, valid_, v1) << R_USB_EPT_DATA_DEV__valid__BITNR) | \
- (R_USB_EPT_DATA_DEV__hold__##f2##__VAL(R_USB_EPT_DATA_DEV_, hold_, v2) << R_USB_EPT_DATA_DEV__hold__BITNR) | \
- (R_USB_EPT_DATA_DEV__stall__##f3##__VAL(R_USB_EPT_DATA_DEV_, stall_, v3) << R_USB_EPT_DATA_DEV__stall__BITNR) | \
- (R_USB_EPT_DATA_DEV__iso_resp__##f4##__VAL(R_USB_EPT_DATA_DEV_, iso_resp_, v4) << R_USB_EPT_DATA_DEV__iso_resp__BITNR) | \
- (R_USB_EPT_DATA_DEV__ctrl__##f5##__VAL(R_USB_EPT_DATA_DEV_, ctrl_, v5) << R_USB_EPT_DATA_DEV__ctrl__BITNR) | \
- (R_USB_EPT_DATA_DEV__iso__##f6##__VAL(R_USB_EPT_DATA_DEV_, iso_, v6) << R_USB_EPT_DATA_DEV__iso__BITNR) | \
- (R_USB_EPT_DATA_DEV__port__##f7##__VAL(R_USB_EPT_DATA_DEV_, port_, v7) << R_USB_EPT_DATA_DEV__port__BITNR) | \
- (R_USB_EPT_DATA_DEV__control_phase__##f8##__VAL(R_USB_EPT_DATA_DEV_, control_phase_, v8) << R_USB_EPT_DATA_DEV__control_phase__BITNR) | \
- (R_USB_EPT_DATA_DEV__t__##f9##__VAL(R_USB_EPT_DATA_DEV_, t_, v9) << R_USB_EPT_DATA_DEV__t__BITNR) | \
- (R_USB_EPT_DATA_DEV__max_len__##f10##__VAL(R_USB_EPT_DATA_DEV_, max_len_, v10) << R_USB_EPT_DATA_DEV__max_len__BITNR) | \
- (R_USB_EPT_DATA_DEV__ep__##f11##__VAL(R_USB_EPT_DATA_DEV_, ep_, v11) << R_USB_EPT_DATA_DEV__ep__BITNR) | \
- (R_USB_EPT_DATA_DEV__dev__##f12##__VAL(R_USB_EPT_DATA_DEV_, dev_, v12) << R_USB_EPT_DATA_DEV__dev__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPT_DATA_DEV_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPT_DATA_DEV.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPT_DATA_DEV_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12) ( \
- (R_USB_EPT_DATA_DEV__valid__##f1_##_VAL(R_USB_EPT_DATA_DEV_, valid_, v1) << R_USB_EPT_DATA_DEV__valid__BITNR) | \
- (R_USB_EPT_DATA_DEV__hold__##f2_##_VAL(R_USB_EPT_DATA_DEV_, hold_, v2) << R_USB_EPT_DATA_DEV__hold__BITNR) | \
- (R_USB_EPT_DATA_DEV__stall__##f3_##_VAL(R_USB_EPT_DATA_DEV_, stall_, v3) << R_USB_EPT_DATA_DEV__stall__BITNR) | \
- (R_USB_EPT_DATA_DEV__iso_resp__##f4_##_VAL(R_USB_EPT_DATA_DEV_, iso_resp_, v4) << R_USB_EPT_DATA_DEV__iso_resp__BITNR) | \
- (R_USB_EPT_DATA_DEV__ctrl__##f5_##_VAL(R_USB_EPT_DATA_DEV_, ctrl_, v5) << R_USB_EPT_DATA_DEV__ctrl__BITNR) | \
- (R_USB_EPT_DATA_DEV__iso__##f6_##_VAL(R_USB_EPT_DATA_DEV_, iso_, v6) << R_USB_EPT_DATA_DEV__iso__BITNR) | \
- (R_USB_EPT_DATA_DEV__port__##f7_##_VAL(R_USB_EPT_DATA_DEV_, port_, v7) << R_USB_EPT_DATA_DEV__port__BITNR) | \
- (R_USB_EPT_DATA_DEV__control_phase__##f8_##_VAL(R_USB_EPT_DATA_DEV_, control_phase_, v8) << R_USB_EPT_DATA_DEV__control_phase__BITNR) | \
- (R_USB_EPT_DATA_DEV__t__##f9_##_VAL(R_USB_EPT_DATA_DEV_, t_, v9) << R_USB_EPT_DATA_DEV__t__BITNR) | \
- (R_USB_EPT_DATA_DEV__max_len__##f10_##_VAL(R_USB_EPT_DATA_DEV_, max_len_, v10) << R_USB_EPT_DATA_DEV__max_len__BITNR) | \
- (R_USB_EPT_DATA_DEV__ep__##f11_##_VAL(R_USB_EPT_DATA_DEV_, ep_, v11) << R_USB_EPT_DATA_DEV__ep__BITNR) | \
- (R_USB_EPT_DATA_DEV__dev__##f12_##_VAL(R_USB_EPT_DATA_DEV_, dev_, v12) << R_USB_EPT_DATA_DEV__dev__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_EPT_DATA_ISO
- * - type: RW
- * - addr: 0xb000021c
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_EPT_DATA_ISO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_EPT_DATA_ISO.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_EPT_DATA_ISO.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_EPT_DATA_ISO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- R_USB_EPT_DATA_ISO__WRITE(R_USB_EPT_DATA_ISO__ADDR, ( \
- REG_VAL__R_USB_EPT_DATA_ISO_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_EPT_DATA_ISO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_EPT_DATA_ISO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_USB_EPT_DATA_ISO__valid__##f1##__MASK & REG__##v1) | \
- (R_USB_EPT_DATA_ISO__port__##f2##__MASK & REG__##v2) | \
- (R_USB_EPT_DATA_ISO__error_code__##f3##__MASK & REG__##v3) | \
- (R_USB_EPT_DATA_ISO__max_len__##f4##__MASK & REG__##v4) | \
- (R_USB_EPT_DATA_ISO__ep__##f5##__MASK & REG__##v5) | \
- (R_USB_EPT_DATA_ISO__dev__##f6##__MASK & REG__##v6) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPT_DATA_ISO
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPT_DATA_ISO.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPT_DATA_ISO(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_USB_EPT_DATA_ISO__valid__##f1##__VAL(R_USB_EPT_DATA_ISO_, valid_, v1) << R_USB_EPT_DATA_ISO__valid__BITNR) | \
- (R_USB_EPT_DATA_ISO__port__##f2##__VAL(R_USB_EPT_DATA_ISO_, port_, v2) << R_USB_EPT_DATA_ISO__port__BITNR) | \
- (R_USB_EPT_DATA_ISO__error_code__##f3##__VAL(R_USB_EPT_DATA_ISO_, error_code_, v3) << R_USB_EPT_DATA_ISO__error_code__BITNR) | \
- (R_USB_EPT_DATA_ISO__max_len__##f4##__VAL(R_USB_EPT_DATA_ISO_, max_len_, v4) << R_USB_EPT_DATA_ISO__max_len__BITNR) | \
- (R_USB_EPT_DATA_ISO__ep__##f5##__VAL(R_USB_EPT_DATA_ISO_, ep_, v5) << R_USB_EPT_DATA_ISO__ep__BITNR) | \
- (R_USB_EPT_DATA_ISO__dev__##f6##__VAL(R_USB_EPT_DATA_ISO_, dev_, v6) << R_USB_EPT_DATA_ISO__dev__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPT_DATA_ISO_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPT_DATA_ISO.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPT_DATA_ISO_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6) ( \
- (R_USB_EPT_DATA_ISO__valid__##f1_##_VAL(R_USB_EPT_DATA_ISO_, valid_, v1) << R_USB_EPT_DATA_ISO__valid__BITNR) | \
- (R_USB_EPT_DATA_ISO__port__##f2_##_VAL(R_USB_EPT_DATA_ISO_, port_, v2) << R_USB_EPT_DATA_ISO__port__BITNR) | \
- (R_USB_EPT_DATA_ISO__error_code__##f3_##_VAL(R_USB_EPT_DATA_ISO_, error_code_, v3) << R_USB_EPT_DATA_ISO__error_code__BITNR) | \
- (R_USB_EPT_DATA_ISO__max_len__##f4_##_VAL(R_USB_EPT_DATA_ISO_, max_len_, v4) << R_USB_EPT_DATA_ISO__max_len__BITNR) | \
- (R_USB_EPT_DATA_ISO__ep__##f5_##_VAL(R_USB_EPT_DATA_ISO_, ep_, v5) << R_USB_EPT_DATA_ISO__ep__BITNR) | \
- (R_USB_EPT_DATA_ISO__dev__##f6_##_VAL(R_USB_EPT_DATA_ISO_, dev_, v6) << R_USB_EPT_DATA_ISO__dev__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_EPT_INDEX
- * - type: RW
- * - addr: 0xb0000208
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_EPT_INDEX
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_EPT_INDEX.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_EPT_INDEX.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_EPT_INDEX(f1,v1) ( \
- R_USB_EPT_INDEX__WRITE(R_USB_EPT_INDEX__ADDR, ( \
- REG_VAL__R_USB_EPT_INDEX_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_EPT_INDEX
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_EPT_INDEX(f1,v1) ( \
- (R_USB_EPT_INDEX__value__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPT_INDEX
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPT_INDEX.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPT_INDEX(f1,v1) ( \
- (R_USB_EPT_INDEX__value__##f1##__VAL(R_USB_EPT_INDEX_, value_, v1) << R_USB_EPT_INDEX__value__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_EPT_INDEX_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_EPT_INDEX.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_EPT_INDEX_(f1_,v1) ( \
- (R_USB_EPT_INDEX__value__##f1_##_VAL(R_USB_EPT_INDEX_, value_, v1) << R_USB_EPT_INDEX__value__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_FM_INTERVAL
- * - type: RW
- * - addr: 0xb0000210
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_FM_INTERVAL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_FM_INTERVAL.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_FM_INTERVAL.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_FM_INTERVAL(f1,v1,f2,v2) ( \
- R_USB_FM_INTERVAL__WRITE(R_USB_FM_INTERVAL__ADDR, ( \
- REG_VAL__R_USB_FM_INTERVAL_(f1##_,v1,f2##_,v2) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_FM_INTERVAL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_FM_INTERVAL(f1,v1,f2,v2) ( \
- (R_USB_FM_INTERVAL__fixed__##f1##__MASK & REG__##v1) | \
- (R_USB_FM_INTERVAL__adj__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_INTERVAL
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_INTERVAL.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_INTERVAL(f1,v1,f2,v2) ( \
- (R_USB_FM_INTERVAL__fixed__##f1##__VAL(R_USB_FM_INTERVAL_, fixed_, v1) << R_USB_FM_INTERVAL__fixed__BITNR) | \
- (R_USB_FM_INTERVAL__adj__##f2##__VAL(R_USB_FM_INTERVAL_, adj_, v2) << R_USB_FM_INTERVAL__adj__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_INTERVAL_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_INTERVAL.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_INTERVAL_(f1_,v1,f2_,v2) ( \
- (R_USB_FM_INTERVAL__fixed__##f1_##_VAL(R_USB_FM_INTERVAL_, fixed_, v1) << R_USB_FM_INTERVAL__fixed__BITNR) | \
- (R_USB_FM_INTERVAL__adj__##f2_##_VAL(R_USB_FM_INTERVAL_, adj_, v2) << R_USB_FM_INTERVAL__adj__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_FM_NUMBER
- * - type: RW
- * - addr: 0xb000020c
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_FM_NUMBER
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_FM_NUMBER.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_FM_NUMBER.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_FM_NUMBER(f1,v1) ( \
- R_USB_FM_NUMBER__WRITE(R_USB_FM_NUMBER__ADDR, ( \
- REG_VAL__R_USB_FM_NUMBER_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_FM_NUMBER
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_FM_NUMBER(f1,v1) ( \
- (R_USB_FM_NUMBER__value__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_NUMBER
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_NUMBER.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_NUMBER(f1,v1) ( \
- (R_USB_FM_NUMBER__value__##f1##__VAL(R_USB_FM_NUMBER_, value_, v1) << R_USB_FM_NUMBER__value__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_NUMBER_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_NUMBER.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_NUMBER_(f1_,v1) ( \
- (R_USB_FM_NUMBER__value__##f1_##_VAL(R_USB_FM_NUMBER_, value_, v1) << R_USB_FM_NUMBER__value__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_FM_NUMBER_DEV
- * - type: RW
- * - addr: 0xb000020c
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_FM_NUMBER_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_FM_NUMBER_DEV.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_FM_NUMBER_DEV.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_FM_NUMBER_DEV(f1,v1,f2,v2,f3,v3) ( \
- R_USB_FM_NUMBER_DEV__WRITE(R_USB_FM_NUMBER_DEV__ADDR, ( \
- REG_VAL__R_USB_FM_NUMBER_DEV_(f1##_,v1,f2##_,v2,f3##_,v3) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_FM_NUMBER_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_FM_NUMBER_DEV(f1,v1,f2,v2,f3,v3) ( \
- (R_USB_FM_NUMBER_DEV__sign__##f1##__MASK & REG__##v1) | \
- (R_USB_FM_NUMBER_DEV__deviation__##f2##__MASK & REG__##v2) | \
- (R_USB_FM_NUMBER_DEV__fm_number__##f3##__MASK & REG__##v3) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_NUMBER_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_NUMBER_DEV.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_NUMBER_DEV(f1,v1,f2,v2,f3,v3) ( \
- (R_USB_FM_NUMBER_DEV__sign__##f1##__VAL(R_USB_FM_NUMBER_DEV_, sign_, v1) << R_USB_FM_NUMBER_DEV__sign__BITNR) | \
- (R_USB_FM_NUMBER_DEV__deviation__##f2##__VAL(R_USB_FM_NUMBER_DEV_, deviation_, v2) << R_USB_FM_NUMBER_DEV__deviation__BITNR) | \
- (R_USB_FM_NUMBER_DEV__fm_number__##f3##__VAL(R_USB_FM_NUMBER_DEV_, fm_number_, v3) << R_USB_FM_NUMBER_DEV__fm_number__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_NUMBER_DEV_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_NUMBER_DEV.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_NUMBER_DEV_(f1_,v1,f2_,v2,f3_,v3) ( \
- (R_USB_FM_NUMBER_DEV__sign__##f1_##_VAL(R_USB_FM_NUMBER_DEV_, sign_, v1) << R_USB_FM_NUMBER_DEV__sign__BITNR) | \
- (R_USB_FM_NUMBER_DEV__deviation__##f2_##_VAL(R_USB_FM_NUMBER_DEV_, deviation_, v2) << R_USB_FM_NUMBER_DEV__deviation__BITNR) | \
- (R_USB_FM_NUMBER_DEV__fm_number__##f3_##_VAL(R_USB_FM_NUMBER_DEV_, fm_number_, v3) << R_USB_FM_NUMBER_DEV__fm_number__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_FM_PSTART
- * - type: RW
- * - addr: 0xb0000214
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_FM_PSTART
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_FM_PSTART.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_FM_PSTART.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_FM_PSTART(f1,v1) ( \
- R_USB_FM_PSTART__WRITE(R_USB_FM_PSTART__ADDR, ( \
- REG_VAL__R_USB_FM_PSTART_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_FM_PSTART
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_FM_PSTART(f1,v1) ( \
- (R_USB_FM_PSTART__value__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_PSTART
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_PSTART.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_PSTART(f1,v1) ( \
- (R_USB_FM_PSTART__value__##f1##__VAL(R_USB_FM_PSTART_, value_, v1) << R_USB_FM_PSTART__value__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_PSTART_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_PSTART.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_PSTART_(f1_,v1) ( \
- (R_USB_FM_PSTART__value__##f1_##_VAL(R_USB_FM_PSTART_, value_, v1) << R_USB_FM_PSTART__value__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_FM_REMAINING
- * - type: RO
- * - addr: 0xb0000212
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_FM_REMAINING
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_FM_REMAINING(f1,v1) ( \
- (R_USB_FM_REMAINING__value__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_REMAINING
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_REMAINING.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_REMAINING(f1,v1) ( \
- (R_USB_FM_REMAINING__value__##f1##__VAL(R_USB_FM_REMAINING_, value_, v1) << R_USB_FM_REMAINING__value__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_FM_REMAINING_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_FM_REMAINING.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_FM_REMAINING_(f1_,v1) ( \
- (R_USB_FM_REMAINING__value__##f1_##_VAL(R_USB_FM_REMAINING_, value_, v1) << R_USB_FM_REMAINING__value__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_IRQ_MASK_CLR
- * - type: WO
- * - addr: 0xb0000206
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_IRQ_MASK_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_IRQ_MASK_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_IRQ_MASK_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_IRQ_MASK_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_USB_IRQ_MASK_CLR__SADDR = ( \
- REG_INITIATED(R_USB_IRQ_MASK_CLR_) \
- REG_VAL__R_USB_IRQ_MASK_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ), \
- R_USB_IRQ_MASK_CLR__WRITE(R_USB_IRQ_MASK_CLR__ADDR, *R_USB_IRQ_MASK_CLR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_IRQ_MASK_CLR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_IRQ_MASK_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_USB_IRQ_MASK_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_IRQ_MASK_CLR__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_USB_IRQ_MASK_CLR__SADDR = ( \
- REG_INITIATED(R_USB_IRQ_MASK_CLR_) \
- REG_VAL__R_USB_IRQ_MASK_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_IRQ_MASK_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_IRQ_MASK_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_USB_IRQ_MASK_CLR__iso_eof__##f1##__MASK & REG__##v1) | \
- (R_USB_IRQ_MASK_CLR__intr_eof__##f2##__MASK & REG__##v2) | \
- (R_USB_IRQ_MASK_CLR__iso_eot__##f3##__MASK & REG__##v3) | \
- (R_USB_IRQ_MASK_CLR__intr_eot__##f4##__MASK & REG__##v4) | \
- (R_USB_IRQ_MASK_CLR__ctl_eot__##f5##__MASK & REG__##v5) | \
- (R_USB_IRQ_MASK_CLR__bulk_eot__##f6##__MASK & REG__##v6) | \
- (R_USB_IRQ_MASK_CLR__epid_attn__##f7##__MASK & REG__##v7) | \
- (R_USB_IRQ_MASK_CLR__sof__##f8##__MASK & REG__##v8) | \
- (R_USB_IRQ_MASK_CLR__port_status__##f9##__MASK & REG__##v9) | \
- (R_USB_IRQ_MASK_CLR__ctl_status__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_CLR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_USB_IRQ_MASK_CLR__iso_eof__##f1##__VAL(R_USB_IRQ_MASK_CLR_, iso_eof_, v1) << R_USB_IRQ_MASK_CLR__iso_eof__BITNR) | \
- (R_USB_IRQ_MASK_CLR__intr_eof__##f2##__VAL(R_USB_IRQ_MASK_CLR_, intr_eof_, v2) << R_USB_IRQ_MASK_CLR__intr_eof__BITNR) | \
- (R_USB_IRQ_MASK_CLR__iso_eot__##f3##__VAL(R_USB_IRQ_MASK_CLR_, iso_eot_, v3) << R_USB_IRQ_MASK_CLR__iso_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR__intr_eot__##f4##__VAL(R_USB_IRQ_MASK_CLR_, intr_eot_, v4) << R_USB_IRQ_MASK_CLR__intr_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR__ctl_eot__##f5##__VAL(R_USB_IRQ_MASK_CLR_, ctl_eot_, v5) << R_USB_IRQ_MASK_CLR__ctl_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR__bulk_eot__##f6##__VAL(R_USB_IRQ_MASK_CLR_, bulk_eot_, v6) << R_USB_IRQ_MASK_CLR__bulk_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR__epid_attn__##f7##__VAL(R_USB_IRQ_MASK_CLR_, epid_attn_, v7) << R_USB_IRQ_MASK_CLR__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_CLR__sof__##f8##__VAL(R_USB_IRQ_MASK_CLR_, sof_, v8) << R_USB_IRQ_MASK_CLR__sof__BITNR) | \
- (R_USB_IRQ_MASK_CLR__port_status__##f9##__VAL(R_USB_IRQ_MASK_CLR_, port_status_, v9) << R_USB_IRQ_MASK_CLR__port_status__BITNR) | \
- (R_USB_IRQ_MASK_CLR__ctl_status__##f10##__VAL(R_USB_IRQ_MASK_CLR_, ctl_status_, v10) << R_USB_IRQ_MASK_CLR__ctl_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_CLR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_CLR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_CLR_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_USB_IRQ_MASK_CLR__iso_eof__##f1_##_VAL(R_USB_IRQ_MASK_CLR_, iso_eof_, v1) << R_USB_IRQ_MASK_CLR__iso_eof__BITNR) | \
- (R_USB_IRQ_MASK_CLR__intr_eof__##f2_##_VAL(R_USB_IRQ_MASK_CLR_, intr_eof_, v2) << R_USB_IRQ_MASK_CLR__intr_eof__BITNR) | \
- (R_USB_IRQ_MASK_CLR__iso_eot__##f3_##_VAL(R_USB_IRQ_MASK_CLR_, iso_eot_, v3) << R_USB_IRQ_MASK_CLR__iso_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR__intr_eot__##f4_##_VAL(R_USB_IRQ_MASK_CLR_, intr_eot_, v4) << R_USB_IRQ_MASK_CLR__intr_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR__ctl_eot__##f5_##_VAL(R_USB_IRQ_MASK_CLR_, ctl_eot_, v5) << R_USB_IRQ_MASK_CLR__ctl_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR__bulk_eot__##f6_##_VAL(R_USB_IRQ_MASK_CLR_, bulk_eot_, v6) << R_USB_IRQ_MASK_CLR__bulk_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR__epid_attn__##f7_##_VAL(R_USB_IRQ_MASK_CLR_, epid_attn_, v7) << R_USB_IRQ_MASK_CLR__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_CLR__sof__##f8_##_VAL(R_USB_IRQ_MASK_CLR_, sof_, v8) << R_USB_IRQ_MASK_CLR__sof__BITNR) | \
- (R_USB_IRQ_MASK_CLR__port_status__##f9_##_VAL(R_USB_IRQ_MASK_CLR_, port_status_, v9) << R_USB_IRQ_MASK_CLR__port_status__BITNR) | \
- (R_USB_IRQ_MASK_CLR__ctl_status__##f10_##_VAL(R_USB_IRQ_MASK_CLR_, ctl_status_, v10) << R_USB_IRQ_MASK_CLR__ctl_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_IRQ_MASK_CLR_DEV
- * - type: WO
- * - addr: 0xb0000206
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_IRQ_MASK_CLR_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_IRQ_MASK_CLR_DEV.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_IRQ_MASK_CLR_DEV.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_IRQ_MASK_CLR_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- *R_USB_IRQ_MASK_CLR_DEV__SADDR = ( \
- REG_INITIATED(R_USB_IRQ_MASK_CLR_DEV_) \
- REG_VAL__R_USB_IRQ_MASK_CLR_DEV_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9) \
- ), \
- R_USB_IRQ_MASK_CLR_DEV__WRITE(R_USB_IRQ_MASK_CLR_DEV__ADDR, *R_USB_IRQ_MASK_CLR_DEV__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_IRQ_MASK_CLR_DEV__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_IRQ_MASK_CLR_DEV.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_USB_IRQ_MASK_CLR_DEV.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_IRQ_MASK_CLR_DEV__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- *R_USB_IRQ_MASK_CLR_DEV__SADDR = ( \
- REG_INITIATED(R_USB_IRQ_MASK_CLR_DEV_) \
- REG_VAL__R_USB_IRQ_MASK_CLR_DEV_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_IRQ_MASK_CLR_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_IRQ_MASK_CLR_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_USB_IRQ_MASK_CLR_DEV__out_eot__##f1##__MASK & REG__##v1) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__##f2##__MASK & REG__##v2) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__##f3##__MASK & REG__##v3) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__##f4##__MASK & REG__##v4) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__##f5##__MASK & REG__##v5) | \
- (R_USB_IRQ_MASK_CLR_DEV__epid_attn__##f6##__MASK & REG__##v6) | \
- (R_USB_IRQ_MASK_CLR_DEV__sof__##f7##__MASK & REG__##v7) | \
- (R_USB_IRQ_MASK_CLR_DEV__port_status__##f8##__MASK & REG__##v8) | \
- (R_USB_IRQ_MASK_CLR_DEV__ctl_status__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_CLR_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_CLR_DEV.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_CLR_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_USB_IRQ_MASK_CLR_DEV__out_eot__##f1##__VAL(R_USB_IRQ_MASK_CLR_DEV_, out_eot_, v1) << R_USB_IRQ_MASK_CLR_DEV__out_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__##f2##__VAL(R_USB_IRQ_MASK_CLR_DEV_, ep3_in_eot_, v2) << R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__##f3##__VAL(R_USB_IRQ_MASK_CLR_DEV_, ep2_in_eot_, v3) << R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__##f4##__VAL(R_USB_IRQ_MASK_CLR_DEV_, ep1_in_eot_, v4) << R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__##f5##__VAL(R_USB_IRQ_MASK_CLR_DEV_, ep0_in_eot_, v5) << R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__epid_attn__##f6##__VAL(R_USB_IRQ_MASK_CLR_DEV_, epid_attn_, v6) << R_USB_IRQ_MASK_CLR_DEV__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__sof__##f7##__VAL(R_USB_IRQ_MASK_CLR_DEV_, sof_, v7) << R_USB_IRQ_MASK_CLR_DEV__sof__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__port_status__##f8##__VAL(R_USB_IRQ_MASK_CLR_DEV_, port_status_, v8) << R_USB_IRQ_MASK_CLR_DEV__port_status__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ctl_status__##f9##__VAL(R_USB_IRQ_MASK_CLR_DEV_, ctl_status_, v9) << R_USB_IRQ_MASK_CLR_DEV__ctl_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_CLR_DEV_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_CLR_DEV.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_CLR_DEV_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_USB_IRQ_MASK_CLR_DEV__out_eot__##f1_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, out_eot_, v1) << R_USB_IRQ_MASK_CLR_DEV__out_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__##f2_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, ep3_in_eot_, v2) << R_USB_IRQ_MASK_CLR_DEV__ep3_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__##f3_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, ep2_in_eot_, v3) << R_USB_IRQ_MASK_CLR_DEV__ep2_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__##f4_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, ep1_in_eot_, v4) << R_USB_IRQ_MASK_CLR_DEV__ep1_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__##f5_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, ep0_in_eot_, v5) << R_USB_IRQ_MASK_CLR_DEV__ep0_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__epid_attn__##f6_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, epid_attn_, v6) << R_USB_IRQ_MASK_CLR_DEV__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__sof__##f7_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, sof_, v7) << R_USB_IRQ_MASK_CLR_DEV__sof__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__port_status__##f8_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, port_status_, v8) << R_USB_IRQ_MASK_CLR_DEV__port_status__BITNR) | \
- (R_USB_IRQ_MASK_CLR_DEV__ctl_status__##f9_##_VAL(R_USB_IRQ_MASK_CLR_DEV_, ctl_status_, v9) << R_USB_IRQ_MASK_CLR_DEV__ctl_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_IRQ_MASK_READ
- * - type: RO
- * - addr: 0xb0000204
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_IRQ_MASK_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_IRQ_MASK_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_USB_IRQ_MASK_READ__iso_eof__##f1##__MASK & REG__##v1) | \
- (R_USB_IRQ_MASK_READ__intr_eof__##f2##__MASK & REG__##v2) | \
- (R_USB_IRQ_MASK_READ__iso_eot__##f3##__MASK & REG__##v3) | \
- (R_USB_IRQ_MASK_READ__intr_eot__##f4##__MASK & REG__##v4) | \
- (R_USB_IRQ_MASK_READ__ctl_eot__##f5##__MASK & REG__##v5) | \
- (R_USB_IRQ_MASK_READ__bulk_eot__##f6##__MASK & REG__##v6) | \
- (R_USB_IRQ_MASK_READ__epid_attn__##f7##__MASK & REG__##v7) | \
- (R_USB_IRQ_MASK_READ__sof__##f8##__MASK & REG__##v8) | \
- (R_USB_IRQ_MASK_READ__port_status__##f9##__MASK & REG__##v9) | \
- (R_USB_IRQ_MASK_READ__ctl_status__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_USB_IRQ_MASK_READ__iso_eof__##f1##__VAL(R_USB_IRQ_MASK_READ_, iso_eof_, v1) << R_USB_IRQ_MASK_READ__iso_eof__BITNR) | \
- (R_USB_IRQ_MASK_READ__intr_eof__##f2##__VAL(R_USB_IRQ_MASK_READ_, intr_eof_, v2) << R_USB_IRQ_MASK_READ__intr_eof__BITNR) | \
- (R_USB_IRQ_MASK_READ__iso_eot__##f3##__VAL(R_USB_IRQ_MASK_READ_, iso_eot_, v3) << R_USB_IRQ_MASK_READ__iso_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ__intr_eot__##f4##__VAL(R_USB_IRQ_MASK_READ_, intr_eot_, v4) << R_USB_IRQ_MASK_READ__intr_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ__ctl_eot__##f5##__VAL(R_USB_IRQ_MASK_READ_, ctl_eot_, v5) << R_USB_IRQ_MASK_READ__ctl_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ__bulk_eot__##f6##__VAL(R_USB_IRQ_MASK_READ_, bulk_eot_, v6) << R_USB_IRQ_MASK_READ__bulk_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ__epid_attn__##f7##__VAL(R_USB_IRQ_MASK_READ_, epid_attn_, v7) << R_USB_IRQ_MASK_READ__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_READ__sof__##f8##__VAL(R_USB_IRQ_MASK_READ_, sof_, v8) << R_USB_IRQ_MASK_READ__sof__BITNR) | \
- (R_USB_IRQ_MASK_READ__port_status__##f9##__VAL(R_USB_IRQ_MASK_READ_, port_status_, v9) << R_USB_IRQ_MASK_READ__port_status__BITNR) | \
- (R_USB_IRQ_MASK_READ__ctl_status__##f10##__VAL(R_USB_IRQ_MASK_READ_, ctl_status_, v10) << R_USB_IRQ_MASK_READ__ctl_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_READ_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_USB_IRQ_MASK_READ__iso_eof__##f1_##_VAL(R_USB_IRQ_MASK_READ_, iso_eof_, v1) << R_USB_IRQ_MASK_READ__iso_eof__BITNR) | \
- (R_USB_IRQ_MASK_READ__intr_eof__##f2_##_VAL(R_USB_IRQ_MASK_READ_, intr_eof_, v2) << R_USB_IRQ_MASK_READ__intr_eof__BITNR) | \
- (R_USB_IRQ_MASK_READ__iso_eot__##f3_##_VAL(R_USB_IRQ_MASK_READ_, iso_eot_, v3) << R_USB_IRQ_MASK_READ__iso_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ__intr_eot__##f4_##_VAL(R_USB_IRQ_MASK_READ_, intr_eot_, v4) << R_USB_IRQ_MASK_READ__intr_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ__ctl_eot__##f5_##_VAL(R_USB_IRQ_MASK_READ_, ctl_eot_, v5) << R_USB_IRQ_MASK_READ__ctl_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ__bulk_eot__##f6_##_VAL(R_USB_IRQ_MASK_READ_, bulk_eot_, v6) << R_USB_IRQ_MASK_READ__bulk_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ__epid_attn__##f7_##_VAL(R_USB_IRQ_MASK_READ_, epid_attn_, v7) << R_USB_IRQ_MASK_READ__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_READ__sof__##f8_##_VAL(R_USB_IRQ_MASK_READ_, sof_, v8) << R_USB_IRQ_MASK_READ__sof__BITNR) | \
- (R_USB_IRQ_MASK_READ__port_status__##f9_##_VAL(R_USB_IRQ_MASK_READ_, port_status_, v9) << R_USB_IRQ_MASK_READ__port_status__BITNR) | \
- (R_USB_IRQ_MASK_READ__ctl_status__##f10_##_VAL(R_USB_IRQ_MASK_READ_, ctl_status_, v10) << R_USB_IRQ_MASK_READ__ctl_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_IRQ_MASK_READ_DEV
- * - type: RO
- * - addr: 0xb0000204
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_IRQ_MASK_READ_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_IRQ_MASK_READ_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_USB_IRQ_MASK_READ_DEV__out_eot__##f1##__MASK & REG__##v1) | \
- (R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__##f2##__MASK & REG__##v2) | \
- (R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__##f3##__MASK & REG__##v3) | \
- (R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__##f4##__MASK & REG__##v4) | \
- (R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__##f5##__MASK & REG__##v5) | \
- (R_USB_IRQ_MASK_READ_DEV__epid_attn__##f6##__MASK & REG__##v6) | \
- (R_USB_IRQ_MASK_READ_DEV__sof__##f7##__MASK & REG__##v7) | \
- (R_USB_IRQ_MASK_READ_DEV__port_status__##f8##__MASK & REG__##v8) | \
- (R_USB_IRQ_MASK_READ_DEV__ctl_status__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_READ_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_READ_DEV.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_READ_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_USB_IRQ_MASK_READ_DEV__out_eot__##f1##__VAL(R_USB_IRQ_MASK_READ_DEV_, out_eot_, v1) << R_USB_IRQ_MASK_READ_DEV__out_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__##f2##__VAL(R_USB_IRQ_MASK_READ_DEV_, ep3_in_eot_, v2) << R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__##f3##__VAL(R_USB_IRQ_MASK_READ_DEV_, ep2_in_eot_, v3) << R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__##f4##__VAL(R_USB_IRQ_MASK_READ_DEV_, ep1_in_eot_, v4) << R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__##f5##__VAL(R_USB_IRQ_MASK_READ_DEV_, ep0_in_eot_, v5) << R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__epid_attn__##f6##__VAL(R_USB_IRQ_MASK_READ_DEV_, epid_attn_, v6) << R_USB_IRQ_MASK_READ_DEV__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__sof__##f7##__VAL(R_USB_IRQ_MASK_READ_DEV_, sof_, v7) << R_USB_IRQ_MASK_READ_DEV__sof__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__port_status__##f8##__VAL(R_USB_IRQ_MASK_READ_DEV_, port_status_, v8) << R_USB_IRQ_MASK_READ_DEV__port_status__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ctl_status__##f9##__VAL(R_USB_IRQ_MASK_READ_DEV_, ctl_status_, v9) << R_USB_IRQ_MASK_READ_DEV__ctl_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_READ_DEV_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_READ_DEV.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_READ_DEV_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_USB_IRQ_MASK_READ_DEV__out_eot__##f1_##_VAL(R_USB_IRQ_MASK_READ_DEV_, out_eot_, v1) << R_USB_IRQ_MASK_READ_DEV__out_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__##f2_##_VAL(R_USB_IRQ_MASK_READ_DEV_, ep3_in_eot_, v2) << R_USB_IRQ_MASK_READ_DEV__ep3_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__##f3_##_VAL(R_USB_IRQ_MASK_READ_DEV_, ep2_in_eot_, v3) << R_USB_IRQ_MASK_READ_DEV__ep2_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__##f4_##_VAL(R_USB_IRQ_MASK_READ_DEV_, ep1_in_eot_, v4) << R_USB_IRQ_MASK_READ_DEV__ep1_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__##f5_##_VAL(R_USB_IRQ_MASK_READ_DEV_, ep0_in_eot_, v5) << R_USB_IRQ_MASK_READ_DEV__ep0_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__epid_attn__##f6_##_VAL(R_USB_IRQ_MASK_READ_DEV_, epid_attn_, v6) << R_USB_IRQ_MASK_READ_DEV__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__sof__##f7_##_VAL(R_USB_IRQ_MASK_READ_DEV_, sof_, v7) << R_USB_IRQ_MASK_READ_DEV__sof__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__port_status__##f8_##_VAL(R_USB_IRQ_MASK_READ_DEV_, port_status_, v8) << R_USB_IRQ_MASK_READ_DEV__port_status__BITNR) | \
- (R_USB_IRQ_MASK_READ_DEV__ctl_status__##f9_##_VAL(R_USB_IRQ_MASK_READ_DEV_, ctl_status_, v9) << R_USB_IRQ_MASK_READ_DEV__ctl_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_IRQ_MASK_SET
- * - type: WO
- * - addr: 0xb0000204
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_IRQ_MASK_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_IRQ_MASK_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_IRQ_MASK_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_IRQ_MASK_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_USB_IRQ_MASK_SET__SADDR = ( \
- REG_INITIATED(R_USB_IRQ_MASK_SET_) \
- REG_VAL__R_USB_IRQ_MASK_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ), \
- R_USB_IRQ_MASK_SET__WRITE(R_USB_IRQ_MASK_SET__ADDR, *R_USB_IRQ_MASK_SET__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_IRQ_MASK_SET__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_IRQ_MASK_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_USB_IRQ_MASK_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_IRQ_MASK_SET__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- *R_USB_IRQ_MASK_SET__SADDR = ( \
- REG_INITIATED(R_USB_IRQ_MASK_SET_) \
- REG_VAL__R_USB_IRQ_MASK_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_IRQ_MASK_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_IRQ_MASK_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_USB_IRQ_MASK_SET__iso_eof__##f1##__MASK & REG__##v1) | \
- (R_USB_IRQ_MASK_SET__intr_eof__##f2##__MASK & REG__##v2) | \
- (R_USB_IRQ_MASK_SET__iso_eot__##f3##__MASK & REG__##v3) | \
- (R_USB_IRQ_MASK_SET__intr_eot__##f4##__MASK & REG__##v4) | \
- (R_USB_IRQ_MASK_SET__ctl_eot__##f5##__MASK & REG__##v5) | \
- (R_USB_IRQ_MASK_SET__bulk_eot__##f6##__MASK & REG__##v6) | \
- (R_USB_IRQ_MASK_SET__epid_attn__##f7##__MASK & REG__##v7) | \
- (R_USB_IRQ_MASK_SET__sof__##f8##__MASK & REG__##v8) | \
- (R_USB_IRQ_MASK_SET__port_status__##f9##__MASK & REG__##v9) | \
- (R_USB_IRQ_MASK_SET__ctl_status__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_SET.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_USB_IRQ_MASK_SET__iso_eof__##f1##__VAL(R_USB_IRQ_MASK_SET_, iso_eof_, v1) << R_USB_IRQ_MASK_SET__iso_eof__BITNR) | \
- (R_USB_IRQ_MASK_SET__intr_eof__##f2##__VAL(R_USB_IRQ_MASK_SET_, intr_eof_, v2) << R_USB_IRQ_MASK_SET__intr_eof__BITNR) | \
- (R_USB_IRQ_MASK_SET__iso_eot__##f3##__VAL(R_USB_IRQ_MASK_SET_, iso_eot_, v3) << R_USB_IRQ_MASK_SET__iso_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET__intr_eot__##f4##__VAL(R_USB_IRQ_MASK_SET_, intr_eot_, v4) << R_USB_IRQ_MASK_SET__intr_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET__ctl_eot__##f5##__VAL(R_USB_IRQ_MASK_SET_, ctl_eot_, v5) << R_USB_IRQ_MASK_SET__ctl_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET__bulk_eot__##f6##__VAL(R_USB_IRQ_MASK_SET_, bulk_eot_, v6) << R_USB_IRQ_MASK_SET__bulk_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET__epid_attn__##f7##__VAL(R_USB_IRQ_MASK_SET_, epid_attn_, v7) << R_USB_IRQ_MASK_SET__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_SET__sof__##f8##__VAL(R_USB_IRQ_MASK_SET_, sof_, v8) << R_USB_IRQ_MASK_SET__sof__BITNR) | \
- (R_USB_IRQ_MASK_SET__port_status__##f9##__VAL(R_USB_IRQ_MASK_SET_, port_status_, v9) << R_USB_IRQ_MASK_SET__port_status__BITNR) | \
- (R_USB_IRQ_MASK_SET__ctl_status__##f10##__VAL(R_USB_IRQ_MASK_SET_, ctl_status_, v10) << R_USB_IRQ_MASK_SET__ctl_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_SET_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_SET.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_SET_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_USB_IRQ_MASK_SET__iso_eof__##f1_##_VAL(R_USB_IRQ_MASK_SET_, iso_eof_, v1) << R_USB_IRQ_MASK_SET__iso_eof__BITNR) | \
- (R_USB_IRQ_MASK_SET__intr_eof__##f2_##_VAL(R_USB_IRQ_MASK_SET_, intr_eof_, v2) << R_USB_IRQ_MASK_SET__intr_eof__BITNR) | \
- (R_USB_IRQ_MASK_SET__iso_eot__##f3_##_VAL(R_USB_IRQ_MASK_SET_, iso_eot_, v3) << R_USB_IRQ_MASK_SET__iso_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET__intr_eot__##f4_##_VAL(R_USB_IRQ_MASK_SET_, intr_eot_, v4) << R_USB_IRQ_MASK_SET__intr_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET__ctl_eot__##f5_##_VAL(R_USB_IRQ_MASK_SET_, ctl_eot_, v5) << R_USB_IRQ_MASK_SET__ctl_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET__bulk_eot__##f6_##_VAL(R_USB_IRQ_MASK_SET_, bulk_eot_, v6) << R_USB_IRQ_MASK_SET__bulk_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET__epid_attn__##f7_##_VAL(R_USB_IRQ_MASK_SET_, epid_attn_, v7) << R_USB_IRQ_MASK_SET__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_SET__sof__##f8_##_VAL(R_USB_IRQ_MASK_SET_, sof_, v8) << R_USB_IRQ_MASK_SET__sof__BITNR) | \
- (R_USB_IRQ_MASK_SET__port_status__##f9_##_VAL(R_USB_IRQ_MASK_SET_, port_status_, v9) << R_USB_IRQ_MASK_SET__port_status__BITNR) | \
- (R_USB_IRQ_MASK_SET__ctl_status__##f10_##_VAL(R_USB_IRQ_MASK_SET_, ctl_status_, v10) << R_USB_IRQ_MASK_SET__ctl_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_IRQ_MASK_SET_DEV
- * - type: WO
- * - addr: 0xb0000204
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_IRQ_MASK_SET_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_IRQ_MASK_SET_DEV.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_IRQ_MASK_SET_DEV.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_IRQ_MASK_SET_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- *R_USB_IRQ_MASK_SET_DEV__SADDR = ( \
- REG_INITIATED(R_USB_IRQ_MASK_SET_DEV_) \
- REG_VAL__R_USB_IRQ_MASK_SET_DEV_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9) \
- ), \
- R_USB_IRQ_MASK_SET_DEV__WRITE(R_USB_IRQ_MASK_SET_DEV__ADDR, *R_USB_IRQ_MASK_SET_DEV__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_IRQ_MASK_SET_DEV__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_IRQ_MASK_SET_DEV.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_USB_IRQ_MASK_SET_DEV.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_IRQ_MASK_SET_DEV__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- *R_USB_IRQ_MASK_SET_DEV__SADDR = ( \
- REG_INITIATED(R_USB_IRQ_MASK_SET_DEV_) \
- REG_VAL__R_USB_IRQ_MASK_SET_DEV_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_IRQ_MASK_SET_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_IRQ_MASK_SET_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_USB_IRQ_MASK_SET_DEV__out_eot__##f1##__MASK & REG__##v1) | \
- (R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__##f2##__MASK & REG__##v2) | \
- (R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__##f3##__MASK & REG__##v3) | \
- (R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__##f4##__MASK & REG__##v4) | \
- (R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__##f5##__MASK & REG__##v5) | \
- (R_USB_IRQ_MASK_SET_DEV__epid_attn__##f6##__MASK & REG__##v6) | \
- (R_USB_IRQ_MASK_SET_DEV__sof__##f7##__MASK & REG__##v7) | \
- (R_USB_IRQ_MASK_SET_DEV__port_status__##f8##__MASK & REG__##v8) | \
- (R_USB_IRQ_MASK_SET_DEV__ctl_status__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_SET_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_SET_DEV.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_SET_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_USB_IRQ_MASK_SET_DEV__out_eot__##f1##__VAL(R_USB_IRQ_MASK_SET_DEV_, out_eot_, v1) << R_USB_IRQ_MASK_SET_DEV__out_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__##f2##__VAL(R_USB_IRQ_MASK_SET_DEV_, ep3_in_eot_, v2) << R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__##f3##__VAL(R_USB_IRQ_MASK_SET_DEV_, ep2_in_eot_, v3) << R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__##f4##__VAL(R_USB_IRQ_MASK_SET_DEV_, ep1_in_eot_, v4) << R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__##f5##__VAL(R_USB_IRQ_MASK_SET_DEV_, ep0_in_eot_, v5) << R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__epid_attn__##f6##__VAL(R_USB_IRQ_MASK_SET_DEV_, epid_attn_, v6) << R_USB_IRQ_MASK_SET_DEV__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__sof__##f7##__VAL(R_USB_IRQ_MASK_SET_DEV_, sof_, v7) << R_USB_IRQ_MASK_SET_DEV__sof__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__port_status__##f8##__VAL(R_USB_IRQ_MASK_SET_DEV_, port_status_, v8) << R_USB_IRQ_MASK_SET_DEV__port_status__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ctl_status__##f9##__VAL(R_USB_IRQ_MASK_SET_DEV_, ctl_status_, v9) << R_USB_IRQ_MASK_SET_DEV__ctl_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_MASK_SET_DEV_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_MASK_SET_DEV.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_MASK_SET_DEV_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_USB_IRQ_MASK_SET_DEV__out_eot__##f1_##_VAL(R_USB_IRQ_MASK_SET_DEV_, out_eot_, v1) << R_USB_IRQ_MASK_SET_DEV__out_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__##f2_##_VAL(R_USB_IRQ_MASK_SET_DEV_, ep3_in_eot_, v2) << R_USB_IRQ_MASK_SET_DEV__ep3_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__##f3_##_VAL(R_USB_IRQ_MASK_SET_DEV_, ep2_in_eot_, v3) << R_USB_IRQ_MASK_SET_DEV__ep2_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__##f4_##_VAL(R_USB_IRQ_MASK_SET_DEV_, ep1_in_eot_, v4) << R_USB_IRQ_MASK_SET_DEV__ep1_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__##f5_##_VAL(R_USB_IRQ_MASK_SET_DEV_, ep0_in_eot_, v5) << R_USB_IRQ_MASK_SET_DEV__ep0_in_eot__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__epid_attn__##f6_##_VAL(R_USB_IRQ_MASK_SET_DEV_, epid_attn_, v6) << R_USB_IRQ_MASK_SET_DEV__epid_attn__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__sof__##f7_##_VAL(R_USB_IRQ_MASK_SET_DEV_, sof_, v7) << R_USB_IRQ_MASK_SET_DEV__sof__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__port_status__##f8_##_VAL(R_USB_IRQ_MASK_SET_DEV_, port_status_, v8) << R_USB_IRQ_MASK_SET_DEV__port_status__BITNR) | \
- (R_USB_IRQ_MASK_SET_DEV__ctl_status__##f9_##_VAL(R_USB_IRQ_MASK_SET_DEV_, ctl_status_, v9) << R_USB_IRQ_MASK_SET_DEV__ctl_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_IRQ_READ
- * - type: RO
- * - addr: 0xb0000206
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_IRQ_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_IRQ_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_USB_IRQ_READ__iso_eof__##f1##__MASK & REG__##v1) | \
- (R_USB_IRQ_READ__intr_eof__##f2##__MASK & REG__##v2) | \
- (R_USB_IRQ_READ__iso_eot__##f3##__MASK & REG__##v3) | \
- (R_USB_IRQ_READ__intr_eot__##f4##__MASK & REG__##v4) | \
- (R_USB_IRQ_READ__ctl_eot__##f5##__MASK & REG__##v5) | \
- (R_USB_IRQ_READ__bulk_eot__##f6##__MASK & REG__##v6) | \
- (R_USB_IRQ_READ__epid_attn__##f7##__MASK & REG__##v7) | \
- (R_USB_IRQ_READ__sof__##f8##__MASK & REG__##v8) | \
- (R_USB_IRQ_READ__port_status__##f9##__MASK & REG__##v9) | \
- (R_USB_IRQ_READ__ctl_status__##f10##__MASK & REG__##v10) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10) ( \
- (R_USB_IRQ_READ__iso_eof__##f1##__VAL(R_USB_IRQ_READ_, iso_eof_, v1) << R_USB_IRQ_READ__iso_eof__BITNR) | \
- (R_USB_IRQ_READ__intr_eof__##f2##__VAL(R_USB_IRQ_READ_, intr_eof_, v2) << R_USB_IRQ_READ__intr_eof__BITNR) | \
- (R_USB_IRQ_READ__iso_eot__##f3##__VAL(R_USB_IRQ_READ_, iso_eot_, v3) << R_USB_IRQ_READ__iso_eot__BITNR) | \
- (R_USB_IRQ_READ__intr_eot__##f4##__VAL(R_USB_IRQ_READ_, intr_eot_, v4) << R_USB_IRQ_READ__intr_eot__BITNR) | \
- (R_USB_IRQ_READ__ctl_eot__##f5##__VAL(R_USB_IRQ_READ_, ctl_eot_, v5) << R_USB_IRQ_READ__ctl_eot__BITNR) | \
- (R_USB_IRQ_READ__bulk_eot__##f6##__VAL(R_USB_IRQ_READ_, bulk_eot_, v6) << R_USB_IRQ_READ__bulk_eot__BITNR) | \
- (R_USB_IRQ_READ__epid_attn__##f7##__VAL(R_USB_IRQ_READ_, epid_attn_, v7) << R_USB_IRQ_READ__epid_attn__BITNR) | \
- (R_USB_IRQ_READ__sof__##f8##__VAL(R_USB_IRQ_READ_, sof_, v8) << R_USB_IRQ_READ__sof__BITNR) | \
- (R_USB_IRQ_READ__port_status__##f9##__VAL(R_USB_IRQ_READ_, port_status_, v9) << R_USB_IRQ_READ__port_status__BITNR) | \
- (R_USB_IRQ_READ__ctl_status__##f10##__VAL(R_USB_IRQ_READ_, ctl_status_, v10) << R_USB_IRQ_READ__ctl_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_READ_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10) ( \
- (R_USB_IRQ_READ__iso_eof__##f1_##_VAL(R_USB_IRQ_READ_, iso_eof_, v1) << R_USB_IRQ_READ__iso_eof__BITNR) | \
- (R_USB_IRQ_READ__intr_eof__##f2_##_VAL(R_USB_IRQ_READ_, intr_eof_, v2) << R_USB_IRQ_READ__intr_eof__BITNR) | \
- (R_USB_IRQ_READ__iso_eot__##f3_##_VAL(R_USB_IRQ_READ_, iso_eot_, v3) << R_USB_IRQ_READ__iso_eot__BITNR) | \
- (R_USB_IRQ_READ__intr_eot__##f4_##_VAL(R_USB_IRQ_READ_, intr_eot_, v4) << R_USB_IRQ_READ__intr_eot__BITNR) | \
- (R_USB_IRQ_READ__ctl_eot__##f5_##_VAL(R_USB_IRQ_READ_, ctl_eot_, v5) << R_USB_IRQ_READ__ctl_eot__BITNR) | \
- (R_USB_IRQ_READ__bulk_eot__##f6_##_VAL(R_USB_IRQ_READ_, bulk_eot_, v6) << R_USB_IRQ_READ__bulk_eot__BITNR) | \
- (R_USB_IRQ_READ__epid_attn__##f7_##_VAL(R_USB_IRQ_READ_, epid_attn_, v7) << R_USB_IRQ_READ__epid_attn__BITNR) | \
- (R_USB_IRQ_READ__sof__##f8_##_VAL(R_USB_IRQ_READ_, sof_, v8) << R_USB_IRQ_READ__sof__BITNR) | \
- (R_USB_IRQ_READ__port_status__##f9_##_VAL(R_USB_IRQ_READ_, port_status_, v9) << R_USB_IRQ_READ__port_status__BITNR) | \
- (R_USB_IRQ_READ__ctl_status__##f10_##_VAL(R_USB_IRQ_READ_, ctl_status_, v10) << R_USB_IRQ_READ__ctl_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_IRQ_READ_DEV
- * - type: RO
- * - addr: 0xb0000206
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_IRQ_READ_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_IRQ_READ_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_USB_IRQ_READ_DEV__out_eot__##f1##__MASK & REG__##v1) | \
- (R_USB_IRQ_READ_DEV__ep3_in_eot__##f2##__MASK & REG__##v2) | \
- (R_USB_IRQ_READ_DEV__ep2_in_eot__##f3##__MASK & REG__##v3) | \
- (R_USB_IRQ_READ_DEV__ep1_in_eot__##f4##__MASK & REG__##v4) | \
- (R_USB_IRQ_READ_DEV__ep0_in_eot__##f5##__MASK & REG__##v5) | \
- (R_USB_IRQ_READ_DEV__epid_attn__##f6##__MASK & REG__##v6) | \
- (R_USB_IRQ_READ_DEV__sof__##f7##__MASK & REG__##v7) | \
- (R_USB_IRQ_READ_DEV__port_status__##f8##__MASK & REG__##v8) | \
- (R_USB_IRQ_READ_DEV__ctl_status__##f9##__MASK & REG__##v9) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_READ_DEV
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_READ_DEV.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_READ_DEV(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9) ( \
- (R_USB_IRQ_READ_DEV__out_eot__##f1##__VAL(R_USB_IRQ_READ_DEV_, out_eot_, v1) << R_USB_IRQ_READ_DEV__out_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__ep3_in_eot__##f2##__VAL(R_USB_IRQ_READ_DEV_, ep3_in_eot_, v2) << R_USB_IRQ_READ_DEV__ep3_in_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__ep2_in_eot__##f3##__VAL(R_USB_IRQ_READ_DEV_, ep2_in_eot_, v3) << R_USB_IRQ_READ_DEV__ep2_in_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__ep1_in_eot__##f4##__VAL(R_USB_IRQ_READ_DEV_, ep1_in_eot_, v4) << R_USB_IRQ_READ_DEV__ep1_in_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__ep0_in_eot__##f5##__VAL(R_USB_IRQ_READ_DEV_, ep0_in_eot_, v5) << R_USB_IRQ_READ_DEV__ep0_in_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__epid_attn__##f6##__VAL(R_USB_IRQ_READ_DEV_, epid_attn_, v6) << R_USB_IRQ_READ_DEV__epid_attn__BITNR) | \
- (R_USB_IRQ_READ_DEV__sof__##f7##__VAL(R_USB_IRQ_READ_DEV_, sof_, v7) << R_USB_IRQ_READ_DEV__sof__BITNR) | \
- (R_USB_IRQ_READ_DEV__port_status__##f8##__VAL(R_USB_IRQ_READ_DEV_, port_status_, v8) << R_USB_IRQ_READ_DEV__port_status__BITNR) | \
- (R_USB_IRQ_READ_DEV__ctl_status__##f9##__VAL(R_USB_IRQ_READ_DEV_, ctl_status_, v9) << R_USB_IRQ_READ_DEV__ctl_status__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_IRQ_READ_DEV_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_IRQ_READ_DEV.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_IRQ_READ_DEV_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9) ( \
- (R_USB_IRQ_READ_DEV__out_eot__##f1_##_VAL(R_USB_IRQ_READ_DEV_, out_eot_, v1) << R_USB_IRQ_READ_DEV__out_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__ep3_in_eot__##f2_##_VAL(R_USB_IRQ_READ_DEV_, ep3_in_eot_, v2) << R_USB_IRQ_READ_DEV__ep3_in_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__ep2_in_eot__##f3_##_VAL(R_USB_IRQ_READ_DEV_, ep2_in_eot_, v3) << R_USB_IRQ_READ_DEV__ep2_in_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__ep1_in_eot__##f4_##_VAL(R_USB_IRQ_READ_DEV_, ep1_in_eot_, v4) << R_USB_IRQ_READ_DEV__ep1_in_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__ep0_in_eot__##f5_##_VAL(R_USB_IRQ_READ_DEV_, ep0_in_eot_, v5) << R_USB_IRQ_READ_DEV__ep0_in_eot__BITNR) | \
- (R_USB_IRQ_READ_DEV__epid_attn__##f6_##_VAL(R_USB_IRQ_READ_DEV_, epid_attn_, v6) << R_USB_IRQ_READ_DEV__epid_attn__BITNR) | \
- (R_USB_IRQ_READ_DEV__sof__##f7_##_VAL(R_USB_IRQ_READ_DEV_, sof_, v7) << R_USB_IRQ_READ_DEV__sof__BITNR) | \
- (R_USB_IRQ_READ_DEV__port_status__##f8_##_VAL(R_USB_IRQ_READ_DEV_, port_status_, v8) << R_USB_IRQ_READ_DEV__port_status__BITNR) | \
- (R_USB_IRQ_READ_DEV__ctl_status__##f9_##_VAL(R_USB_IRQ_READ_DEV_, ctl_status_, v9) << R_USB_IRQ_READ_DEV__ctl_status__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_PORT1_DISABLE
- * - type: WO
- * - addr: 0xb000006a
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_PORT1_DISABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_PORT1_DISABLE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_PORT1_DISABLE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_PORT1_DISABLE(f1,v1) ( \
- *R_USB_PORT1_DISABLE__SADDR = ( \
- REG_INITIATED(R_USB_PORT1_DISABLE_) \
- REG_VAL__R_USB_PORT1_DISABLE_(f1##_,v1) \
- ), \
- R_USB_PORT1_DISABLE__WRITE(R_USB_PORT1_DISABLE__ADDR, *R_USB_PORT1_DISABLE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_PORT1_DISABLE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_PORT1_DISABLE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_USB_PORT1_DISABLE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_PORT1_DISABLE__SHADOW(f1,v1) ( \
- *R_USB_PORT1_DISABLE__SADDR = ( \
- REG_INITIATED(R_USB_PORT1_DISABLE_) \
- REG_VAL__R_USB_PORT1_DISABLE_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_PORT1_DISABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_PORT1_DISABLE(f1,v1) ( \
- (R_USB_PORT1_DISABLE__disable__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_PORT1_DISABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_PORT1_DISABLE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_PORT1_DISABLE(f1,v1) ( \
- (R_USB_PORT1_DISABLE__disable__##f1##__VAL(R_USB_PORT1_DISABLE_, disable_, v1) << R_USB_PORT1_DISABLE__disable__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_PORT1_DISABLE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_PORT1_DISABLE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_PORT1_DISABLE_(f1_,v1) ( \
- (R_USB_PORT1_DISABLE__disable__##f1_##_VAL(R_USB_PORT1_DISABLE_, disable_, v1) << R_USB_PORT1_DISABLE__disable__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_PORT2_DISABLE
- * - type: WO
- * - addr: 0xb0000052
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_PORT2_DISABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_PORT2_DISABLE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_PORT2_DISABLE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_PORT2_DISABLE(f1,v1) ( \
- *R_USB_PORT2_DISABLE__SADDR = ( \
- REG_INITIATED(R_USB_PORT2_DISABLE_) \
- REG_VAL__R_USB_PORT2_DISABLE_(f1##_,v1) \
- ), \
- R_USB_PORT2_DISABLE__WRITE(R_USB_PORT2_DISABLE__ADDR, *R_USB_PORT2_DISABLE__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_PORT2_DISABLE__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_PORT2_DISABLE.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_USB_PORT2_DISABLE.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_PORT2_DISABLE__SHADOW(f1,v1) ( \
- *R_USB_PORT2_DISABLE__SADDR = ( \
- REG_INITIATED(R_USB_PORT2_DISABLE_) \
- REG_VAL__R_USB_PORT2_DISABLE_(f1##_,v1) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_PORT2_DISABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_PORT2_DISABLE(f1,v1) ( \
- (R_USB_PORT2_DISABLE__disable__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_PORT2_DISABLE
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_PORT2_DISABLE.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_PORT2_DISABLE(f1,v1) ( \
- (R_USB_PORT2_DISABLE__disable__##f1##__VAL(R_USB_PORT2_DISABLE_, disable_, v1) << R_USB_PORT2_DISABLE__disable__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_PORT2_DISABLE_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_PORT2_DISABLE.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_PORT2_DISABLE_(f1_,v1) ( \
- (R_USB_PORT2_DISABLE__disable__##f1_##_VAL(R_USB_PORT2_DISABLE_, disable_, v1) << R_USB_PORT2_DISABLE__disable__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_REVISION
- * - type: RO
- * - addr: 0xb0000200
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_REVISION
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_REVISION(f1,v1,f2,v2) ( \
- (R_USB_REVISION__major__##f1##__MASK & REG__##v1) | \
- (R_USB_REVISION__minor__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_REVISION
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_REVISION.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_REVISION(f1,v1,f2,v2) ( \
- (R_USB_REVISION__major__##f1##__VAL(R_USB_REVISION_, major_, v1) << R_USB_REVISION__major__BITNR) | \
- (R_USB_REVISION__minor__##f2##__VAL(R_USB_REVISION_, minor_, v2) << R_USB_REVISION__minor__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_REVISION_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_REVISION.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_REVISION_(f1_,v1,f2_,v2) ( \
- (R_USB_REVISION__major__##f1_##_VAL(R_USB_REVISION_, major_, v1) << R_USB_REVISION__major__BITNR) | \
- (R_USB_REVISION__minor__##f2_##_VAL(R_USB_REVISION_, minor_, v2) << R_USB_REVISION__minor__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_RH_PORT_STATUS_1
- * - type: RO
- * - addr: 0xb0000218
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_RH_PORT_STATUS_1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_RH_PORT_STATUS_1(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- (R_USB_RH_PORT_STATUS_1__speed__##f1##__MASK & REG__##v1) | \
- (R_USB_RH_PORT_STATUS_1__power__##f2##__MASK & REG__##v2) | \
- (R_USB_RH_PORT_STATUS_1__reset__##f3##__MASK & REG__##v3) | \
- (R_USB_RH_PORT_STATUS_1__overcurrent__##f4##__MASK & REG__##v4) | \
- (R_USB_RH_PORT_STATUS_1__suspended__##f5##__MASK & REG__##v5) | \
- (R_USB_RH_PORT_STATUS_1__enabled__##f6##__MASK & REG__##v6) | \
- (R_USB_RH_PORT_STATUS_1__connected__##f7##__MASK & REG__##v7) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_RH_PORT_STATUS_1
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_RH_PORT_STATUS_1.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_RH_PORT_STATUS_1(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- (R_USB_RH_PORT_STATUS_1__speed__##f1##__VAL(R_USB_RH_PORT_STATUS_1_, speed_, v1) << R_USB_RH_PORT_STATUS_1__speed__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__power__##f2##__VAL(R_USB_RH_PORT_STATUS_1_, power_, v2) << R_USB_RH_PORT_STATUS_1__power__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__reset__##f3##__VAL(R_USB_RH_PORT_STATUS_1_, reset_, v3) << R_USB_RH_PORT_STATUS_1__reset__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__overcurrent__##f4##__VAL(R_USB_RH_PORT_STATUS_1_, overcurrent_, v4) << R_USB_RH_PORT_STATUS_1__overcurrent__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__suspended__##f5##__VAL(R_USB_RH_PORT_STATUS_1_, suspended_, v5) << R_USB_RH_PORT_STATUS_1__suspended__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__enabled__##f6##__VAL(R_USB_RH_PORT_STATUS_1_, enabled_, v6) << R_USB_RH_PORT_STATUS_1__enabled__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__connected__##f7##__VAL(R_USB_RH_PORT_STATUS_1_, connected_, v7) << R_USB_RH_PORT_STATUS_1__connected__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_RH_PORT_STATUS_1_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_RH_PORT_STATUS_1.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_RH_PORT_STATUS_1_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7) ( \
- (R_USB_RH_PORT_STATUS_1__speed__##f1_##_VAL(R_USB_RH_PORT_STATUS_1_, speed_, v1) << R_USB_RH_PORT_STATUS_1__speed__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__power__##f2_##_VAL(R_USB_RH_PORT_STATUS_1_, power_, v2) << R_USB_RH_PORT_STATUS_1__power__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__reset__##f3_##_VAL(R_USB_RH_PORT_STATUS_1_, reset_, v3) << R_USB_RH_PORT_STATUS_1__reset__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__overcurrent__##f4_##_VAL(R_USB_RH_PORT_STATUS_1_, overcurrent_, v4) << R_USB_RH_PORT_STATUS_1__overcurrent__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__suspended__##f5_##_VAL(R_USB_RH_PORT_STATUS_1_, suspended_, v5) << R_USB_RH_PORT_STATUS_1__suspended__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__enabled__##f6_##_VAL(R_USB_RH_PORT_STATUS_1_, enabled_, v6) << R_USB_RH_PORT_STATUS_1__enabled__BITNR) | \
- (R_USB_RH_PORT_STATUS_1__connected__##f7_##_VAL(R_USB_RH_PORT_STATUS_1_, connected_, v7) << R_USB_RH_PORT_STATUS_1__connected__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_RH_PORT_STATUS_2
- * - type: RO
- * - addr: 0xb000021a
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_RH_PORT_STATUS_2
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_RH_PORT_STATUS_2(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- (R_USB_RH_PORT_STATUS_2__speed__##f1##__MASK & REG__##v1) | \
- (R_USB_RH_PORT_STATUS_2__power__##f2##__MASK & REG__##v2) | \
- (R_USB_RH_PORT_STATUS_2__reset__##f3##__MASK & REG__##v3) | \
- (R_USB_RH_PORT_STATUS_2__overcurrent__##f4##__MASK & REG__##v4) | \
- (R_USB_RH_PORT_STATUS_2__suspended__##f5##__MASK & REG__##v5) | \
- (R_USB_RH_PORT_STATUS_2__enabled__##f6##__MASK & REG__##v6) | \
- (R_USB_RH_PORT_STATUS_2__connected__##f7##__MASK & REG__##v7) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_RH_PORT_STATUS_2
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_RH_PORT_STATUS_2.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_RH_PORT_STATUS_2(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7) ( \
- (R_USB_RH_PORT_STATUS_2__speed__##f1##__VAL(R_USB_RH_PORT_STATUS_2_, speed_, v1) << R_USB_RH_PORT_STATUS_2__speed__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__power__##f2##__VAL(R_USB_RH_PORT_STATUS_2_, power_, v2) << R_USB_RH_PORT_STATUS_2__power__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__reset__##f3##__VAL(R_USB_RH_PORT_STATUS_2_, reset_, v3) << R_USB_RH_PORT_STATUS_2__reset__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__overcurrent__##f4##__VAL(R_USB_RH_PORT_STATUS_2_, overcurrent_, v4) << R_USB_RH_PORT_STATUS_2__overcurrent__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__suspended__##f5##__VAL(R_USB_RH_PORT_STATUS_2_, suspended_, v5) << R_USB_RH_PORT_STATUS_2__suspended__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__enabled__##f6##__VAL(R_USB_RH_PORT_STATUS_2_, enabled_, v6) << R_USB_RH_PORT_STATUS_2__enabled__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__connected__##f7##__VAL(R_USB_RH_PORT_STATUS_2_, connected_, v7) << R_USB_RH_PORT_STATUS_2__connected__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_RH_PORT_STATUS_2_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_RH_PORT_STATUS_2.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_RH_PORT_STATUS_2_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7) ( \
- (R_USB_RH_PORT_STATUS_2__speed__##f1_##_VAL(R_USB_RH_PORT_STATUS_2_, speed_, v1) << R_USB_RH_PORT_STATUS_2__speed__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__power__##f2_##_VAL(R_USB_RH_PORT_STATUS_2_, power_, v2) << R_USB_RH_PORT_STATUS_2__power__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__reset__##f3_##_VAL(R_USB_RH_PORT_STATUS_2_, reset_, v3) << R_USB_RH_PORT_STATUS_2__reset__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__overcurrent__##f4_##_VAL(R_USB_RH_PORT_STATUS_2_, overcurrent_, v4) << R_USB_RH_PORT_STATUS_2__overcurrent__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__suspended__##f5_##_VAL(R_USB_RH_PORT_STATUS_2_, suspended_, v5) << R_USB_RH_PORT_STATUS_2__suspended__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__enabled__##f6_##_VAL(R_USB_RH_PORT_STATUS_2_, enabled_, v6) << R_USB_RH_PORT_STATUS_2__enabled__BITNR) | \
- (R_USB_RH_PORT_STATUS_2__connected__##f7_##_VAL(R_USB_RH_PORT_STATUS_2_, connected_, v7) << R_USB_RH_PORT_STATUS_2__connected__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_RH_STATUS
- * - type: RO
- * - addr: 0xb0000203
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_RH_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_RH_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_USB_RH_STATUS__babble2__##f1##__MASK & REG__##v1) | \
- (R_USB_RH_STATUS__babble1__##f2##__MASK & REG__##v2) | \
- (R_USB_RH_STATUS__bus1__##f3##__MASK & REG__##v3) | \
- (R_USB_RH_STATUS__bus2__##f4##__MASK & REG__##v4) | \
- (R_USB_RH_STATUS__nports__##f5##__MASK & REG__##v5) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_RH_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_RH_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_RH_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5) ( \
- (R_USB_RH_STATUS__babble2__##f1##__VAL(R_USB_RH_STATUS_, babble2_, v1) << R_USB_RH_STATUS__babble2__BITNR) | \
- (R_USB_RH_STATUS__babble1__##f2##__VAL(R_USB_RH_STATUS_, babble1_, v2) << R_USB_RH_STATUS__babble1__BITNR) | \
- (R_USB_RH_STATUS__bus1__##f3##__VAL(R_USB_RH_STATUS_, bus1_, v3) << R_USB_RH_STATUS__bus1__BITNR) | \
- (R_USB_RH_STATUS__bus2__##f4##__VAL(R_USB_RH_STATUS_, bus2_, v4) << R_USB_RH_STATUS__bus2__BITNR) | \
- (R_USB_RH_STATUS__nports__##f5##__VAL(R_USB_RH_STATUS_, nports_, v5) << R_USB_RH_STATUS__nports__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_RH_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_RH_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_RH_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5) ( \
- (R_USB_RH_STATUS__babble2__##f1_##_VAL(R_USB_RH_STATUS_, babble2_, v1) << R_USB_RH_STATUS__babble2__BITNR) | \
- (R_USB_RH_STATUS__babble1__##f2_##_VAL(R_USB_RH_STATUS_, babble1_, v2) << R_USB_RH_STATUS__babble1__BITNR) | \
- (R_USB_RH_STATUS__bus1__##f3_##_VAL(R_USB_RH_STATUS_, bus1_, v3) << R_USB_RH_STATUS__bus1__BITNR) | \
- (R_USB_RH_STATUS__bus2__##f4_##_VAL(R_USB_RH_STATUS_, bus2_, v4) << R_USB_RH_STATUS__bus2__BITNR) | \
- (R_USB_RH_STATUS__nports__##f5_##_VAL(R_USB_RH_STATUS_, nports_, v5) << R_USB_RH_STATUS__nports__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_SNMP_TERROR
- * - type: RW
- * - addr: 0xb0000220
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_USB_SNMP_TERROR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_USB_SNMP_TERROR.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_USB_SNMP_TERROR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_USB_SNMP_TERROR(f1,v1) ( \
- R_USB_SNMP_TERROR__WRITE(R_USB_SNMP_TERROR__ADDR, ( \
- REG_VAL__R_USB_SNMP_TERROR_(f1##_,v1) ) \
- ) \
-)
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_SNMP_TERROR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_SNMP_TERROR(f1,v1) ( \
- (R_USB_SNMP_TERROR__value__##f1##__MASK & REG__##v1) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_SNMP_TERROR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_SNMP_TERROR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_SNMP_TERROR(f1,v1) ( \
- (R_USB_SNMP_TERROR__value__##f1##__VAL(R_USB_SNMP_TERROR_, value_, v1) << R_USB_SNMP_TERROR__value__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_SNMP_TERROR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_SNMP_TERROR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_SNMP_TERROR_(f1_,v1) ( \
- (R_USB_SNMP_TERROR__value__##f1_##_VAL(R_USB_SNMP_TERROR_, value_, v1) << R_USB_SNMP_TERROR__value__BITNR) \
-)
-
-#endif
-
-/*
- * R_USB_STATUS
- * - type: RO
- * - addr: 0xb0000202
- * - group: USB interface control registers
- */
-
-#if USE_GROUP__USB_interface_control_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_USB_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_USB_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_USB_STATUS__ourun__##f1##__MASK & REG__##v1) | \
- (R_USB_STATUS__perror__##f2##__MASK & REG__##v2) | \
- (R_USB_STATUS__device_mode__##f3##__MASK & REG__##v3) | \
- (R_USB_STATUS__host_mode__##f4##__MASK & REG__##v4) | \
- (R_USB_STATUS__started__##f5##__MASK & REG__##v5) | \
- (R_USB_STATUS__running__##f6##__MASK & REG__##v6) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_STATUS
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_STATUS.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_STATUS(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6) ( \
- (R_USB_STATUS__ourun__##f1##__VAL(R_USB_STATUS_, ourun_, v1) << R_USB_STATUS__ourun__BITNR) | \
- (R_USB_STATUS__perror__##f2##__VAL(R_USB_STATUS_, perror_, v2) << R_USB_STATUS__perror__BITNR) | \
- (R_USB_STATUS__device_mode__##f3##__VAL(R_USB_STATUS_, device_mode_, v3) << R_USB_STATUS__device_mode__BITNR) | \
- (R_USB_STATUS__host_mode__##f4##__VAL(R_USB_STATUS_, host_mode_, v4) << R_USB_STATUS__host_mode__BITNR) | \
- (R_USB_STATUS__started__##f5##__VAL(R_USB_STATUS_, started_, v5) << R_USB_STATUS__started__BITNR) | \
- (R_USB_STATUS__running__##f6##__VAL(R_USB_STATUS_, running_, v6) << R_USB_STATUS__running__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_USB_STATUS_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_USB_STATUS.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_USB_STATUS_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6) ( \
- (R_USB_STATUS__ourun__##f1_##_VAL(R_USB_STATUS_, ourun_, v1) << R_USB_STATUS__ourun__BITNR) | \
- (R_USB_STATUS__perror__##f2_##_VAL(R_USB_STATUS_, perror_, v2) << R_USB_STATUS__perror__BITNR) | \
- (R_USB_STATUS__device_mode__##f3_##_VAL(R_USB_STATUS_, device_mode_, v3) << R_USB_STATUS__device_mode__BITNR) | \
- (R_USB_STATUS__host_mode__##f4_##_VAL(R_USB_STATUS_, host_mode_, v4) << R_USB_STATUS__host_mode__BITNR) | \
- (R_USB_STATUS__started__##f5_##_VAL(R_USB_STATUS_, started_, v5) << R_USB_STATUS__started__BITNR) | \
- (R_USB_STATUS__running__##f6_##_VAL(R_USB_STATUS_, running_, v6) << R_USB_STATUS__running__BITNR) \
-)
-
-#endif
-
-/*
- * R_VECT_MASK_CLR
- * - type: WO
- * - addr: 0xb00000d8
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_VECT_MASK_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_VECT_MASK_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_VECT_MASK_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_VECT_MASK_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- *R_VECT_MASK_CLR__SADDR = ( \
- REG_INITIATED(R_VECT_MASK_CLR_) \
- REG_VAL__R_VECT_MASK_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25) \
- ), \
- R_VECT_MASK_CLR__WRITE(R_VECT_MASK_CLR__ADDR, *R_VECT_MASK_CLR__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_VECT_MASK_CLR__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_VECT_MASK_CLR.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_VECT_MASK_CLR.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_VECT_MASK_CLR__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- *R_VECT_MASK_CLR__SADDR = ( \
- REG_INITIATED(R_VECT_MASK_CLR_) \
- REG_VAL__R_VECT_MASK_CLR_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_VECT_MASK_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_VECT_MASK_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_VECT_MASK_CLR__usb__##f1##__MASK & REG__##v1) | \
- (R_VECT_MASK_CLR__dma9__##f2##__MASK & REG__##v2) | \
- (R_VECT_MASK_CLR__dma8__##f3##__MASK & REG__##v3) | \
- (R_VECT_MASK_CLR__dma7__##f4##__MASK & REG__##v4) | \
- (R_VECT_MASK_CLR__dma6__##f5##__MASK & REG__##v5) | \
- (R_VECT_MASK_CLR__dma5__##f6##__MASK & REG__##v6) | \
- (R_VECT_MASK_CLR__dma4__##f7##__MASK & REG__##v7) | \
- (R_VECT_MASK_CLR__dma3__##f8##__MASK & REG__##v8) | \
- (R_VECT_MASK_CLR__dma2__##f9##__MASK & REG__##v9) | \
- (R_VECT_MASK_CLR__dma1__##f10##__MASK & REG__##v10) | \
- (R_VECT_MASK_CLR__dma0__##f11##__MASK & REG__##v11) | \
- (R_VECT_MASK_CLR__ext_dma1__##f12##__MASK & REG__##v12) | \
- (R_VECT_MASK_CLR__ext_dma0__##f13##__MASK & REG__##v13) | \
- (R_VECT_MASK_CLR__pa__##f14##__MASK & REG__##v14) | \
- (R_VECT_MASK_CLR__irq_intnr__##f15##__MASK & REG__##v15) | \
- (R_VECT_MASK_CLR__sw__##f16##__MASK & REG__##v16) | \
- (R_VECT_MASK_CLR__serial__##f17##__MASK & REG__##v17) | \
- (R_VECT_MASK_CLR__snmp__##f18##__MASK & REG__##v18) | \
- (R_VECT_MASK_CLR__network__##f19##__MASK & REG__##v19) | \
- (R_VECT_MASK_CLR__scsi1__##f20##__MASK & REG__##v20) | \
- (R_VECT_MASK_CLR__scsi0__##f21##__MASK & REG__##v21) | \
- (R_VECT_MASK_CLR__timer1__##f22##__MASK & REG__##v22) | \
- (R_VECT_MASK_CLR__timer0__##f23##__MASK & REG__##v23) | \
- (R_VECT_MASK_CLR__nmi__##f24##__MASK & REG__##v24) | \
- (R_VECT_MASK_CLR__some__##f25##__MASK & REG__##v25) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_VECT_MASK_CLR
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_VECT_MASK_CLR.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_VECT_MASK_CLR(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_VECT_MASK_CLR__usb__##f1##__VAL(R_VECT_MASK_CLR_, usb_, v1) << R_VECT_MASK_CLR__usb__BITNR) | \
- (R_VECT_MASK_CLR__dma9__##f2##__VAL(R_VECT_MASK_CLR_, dma9_, v2) << R_VECT_MASK_CLR__dma9__BITNR) | \
- (R_VECT_MASK_CLR__dma8__##f3##__VAL(R_VECT_MASK_CLR_, dma8_, v3) << R_VECT_MASK_CLR__dma8__BITNR) | \
- (R_VECT_MASK_CLR__dma7__##f4##__VAL(R_VECT_MASK_CLR_, dma7_, v4) << R_VECT_MASK_CLR__dma7__BITNR) | \
- (R_VECT_MASK_CLR__dma6__##f5##__VAL(R_VECT_MASK_CLR_, dma6_, v5) << R_VECT_MASK_CLR__dma6__BITNR) | \
- (R_VECT_MASK_CLR__dma5__##f6##__VAL(R_VECT_MASK_CLR_, dma5_, v6) << R_VECT_MASK_CLR__dma5__BITNR) | \
- (R_VECT_MASK_CLR__dma4__##f7##__VAL(R_VECT_MASK_CLR_, dma4_, v7) << R_VECT_MASK_CLR__dma4__BITNR) | \
- (R_VECT_MASK_CLR__dma3__##f8##__VAL(R_VECT_MASK_CLR_, dma3_, v8) << R_VECT_MASK_CLR__dma3__BITNR) | \
- (R_VECT_MASK_CLR__dma2__##f9##__VAL(R_VECT_MASK_CLR_, dma2_, v9) << R_VECT_MASK_CLR__dma2__BITNR) | \
- (R_VECT_MASK_CLR__dma1__##f10##__VAL(R_VECT_MASK_CLR_, dma1_, v10) << R_VECT_MASK_CLR__dma1__BITNR) | \
- (R_VECT_MASK_CLR__dma0__##f11##__VAL(R_VECT_MASK_CLR_, dma0_, v11) << R_VECT_MASK_CLR__dma0__BITNR) | \
- (R_VECT_MASK_CLR__ext_dma1__##f12##__VAL(R_VECT_MASK_CLR_, ext_dma1_, v12) << R_VECT_MASK_CLR__ext_dma1__BITNR) | \
- (R_VECT_MASK_CLR__ext_dma0__##f13##__VAL(R_VECT_MASK_CLR_, ext_dma0_, v13) << R_VECT_MASK_CLR__ext_dma0__BITNR) | \
- (R_VECT_MASK_CLR__pa__##f14##__VAL(R_VECT_MASK_CLR_, pa_, v14) << R_VECT_MASK_CLR__pa__BITNR) | \
- (R_VECT_MASK_CLR__irq_intnr__##f15##__VAL(R_VECT_MASK_CLR_, irq_intnr_, v15) << R_VECT_MASK_CLR__irq_intnr__BITNR) | \
- (R_VECT_MASK_CLR__sw__##f16##__VAL(R_VECT_MASK_CLR_, sw_, v16) << R_VECT_MASK_CLR__sw__BITNR) | \
- (R_VECT_MASK_CLR__serial__##f17##__VAL(R_VECT_MASK_CLR_, serial_, v17) << R_VECT_MASK_CLR__serial__BITNR) | \
- (R_VECT_MASK_CLR__snmp__##f18##__VAL(R_VECT_MASK_CLR_, snmp_, v18) << R_VECT_MASK_CLR__snmp__BITNR) | \
- (R_VECT_MASK_CLR__network__##f19##__VAL(R_VECT_MASK_CLR_, network_, v19) << R_VECT_MASK_CLR__network__BITNR) | \
- (R_VECT_MASK_CLR__scsi1__##f20##__VAL(R_VECT_MASK_CLR_, scsi1_, v20) << R_VECT_MASK_CLR__scsi1__BITNR) | \
- (R_VECT_MASK_CLR__scsi0__##f21##__VAL(R_VECT_MASK_CLR_, scsi0_, v21) << R_VECT_MASK_CLR__scsi0__BITNR) | \
- (R_VECT_MASK_CLR__timer1__##f22##__VAL(R_VECT_MASK_CLR_, timer1_, v22) << R_VECT_MASK_CLR__timer1__BITNR) | \
- (R_VECT_MASK_CLR__timer0__##f23##__VAL(R_VECT_MASK_CLR_, timer0_, v23) << R_VECT_MASK_CLR__timer0__BITNR) | \
- (R_VECT_MASK_CLR__nmi__##f24##__VAL(R_VECT_MASK_CLR_, nmi_, v24) << R_VECT_MASK_CLR__nmi__BITNR) | \
- (R_VECT_MASK_CLR__some__##f25##__VAL(R_VECT_MASK_CLR_, some_, v25) << R_VECT_MASK_CLR__some__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_VECT_MASK_CLR_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_VECT_MASK_CLR.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_VECT_MASK_CLR_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25) ( \
- (R_VECT_MASK_CLR__usb__##f1_##_VAL(R_VECT_MASK_CLR_, usb_, v1) << R_VECT_MASK_CLR__usb__BITNR) | \
- (R_VECT_MASK_CLR__dma9__##f2_##_VAL(R_VECT_MASK_CLR_, dma9_, v2) << R_VECT_MASK_CLR__dma9__BITNR) | \
- (R_VECT_MASK_CLR__dma8__##f3_##_VAL(R_VECT_MASK_CLR_, dma8_, v3) << R_VECT_MASK_CLR__dma8__BITNR) | \
- (R_VECT_MASK_CLR__dma7__##f4_##_VAL(R_VECT_MASK_CLR_, dma7_, v4) << R_VECT_MASK_CLR__dma7__BITNR) | \
- (R_VECT_MASK_CLR__dma6__##f5_##_VAL(R_VECT_MASK_CLR_, dma6_, v5) << R_VECT_MASK_CLR__dma6__BITNR) | \
- (R_VECT_MASK_CLR__dma5__##f6_##_VAL(R_VECT_MASK_CLR_, dma5_, v6) << R_VECT_MASK_CLR__dma5__BITNR) | \
- (R_VECT_MASK_CLR__dma4__##f7_##_VAL(R_VECT_MASK_CLR_, dma4_, v7) << R_VECT_MASK_CLR__dma4__BITNR) | \
- (R_VECT_MASK_CLR__dma3__##f8_##_VAL(R_VECT_MASK_CLR_, dma3_, v8) << R_VECT_MASK_CLR__dma3__BITNR) | \
- (R_VECT_MASK_CLR__dma2__##f9_##_VAL(R_VECT_MASK_CLR_, dma2_, v9) << R_VECT_MASK_CLR__dma2__BITNR) | \
- (R_VECT_MASK_CLR__dma1__##f10_##_VAL(R_VECT_MASK_CLR_, dma1_, v10) << R_VECT_MASK_CLR__dma1__BITNR) | \
- (R_VECT_MASK_CLR__dma0__##f11_##_VAL(R_VECT_MASK_CLR_, dma0_, v11) << R_VECT_MASK_CLR__dma0__BITNR) | \
- (R_VECT_MASK_CLR__ext_dma1__##f12_##_VAL(R_VECT_MASK_CLR_, ext_dma1_, v12) << R_VECT_MASK_CLR__ext_dma1__BITNR) | \
- (R_VECT_MASK_CLR__ext_dma0__##f13_##_VAL(R_VECT_MASK_CLR_, ext_dma0_, v13) << R_VECT_MASK_CLR__ext_dma0__BITNR) | \
- (R_VECT_MASK_CLR__pa__##f14_##_VAL(R_VECT_MASK_CLR_, pa_, v14) << R_VECT_MASK_CLR__pa__BITNR) | \
- (R_VECT_MASK_CLR__irq_intnr__##f15_##_VAL(R_VECT_MASK_CLR_, irq_intnr_, v15) << R_VECT_MASK_CLR__irq_intnr__BITNR) | \
- (R_VECT_MASK_CLR__sw__##f16_##_VAL(R_VECT_MASK_CLR_, sw_, v16) << R_VECT_MASK_CLR__sw__BITNR) | \
- (R_VECT_MASK_CLR__serial__##f17_##_VAL(R_VECT_MASK_CLR_, serial_, v17) << R_VECT_MASK_CLR__serial__BITNR) | \
- (R_VECT_MASK_CLR__snmp__##f18_##_VAL(R_VECT_MASK_CLR_, snmp_, v18) << R_VECT_MASK_CLR__snmp__BITNR) | \
- (R_VECT_MASK_CLR__network__##f19_##_VAL(R_VECT_MASK_CLR_, network_, v19) << R_VECT_MASK_CLR__network__BITNR) | \
- (R_VECT_MASK_CLR__scsi1__##f20_##_VAL(R_VECT_MASK_CLR_, scsi1_, v20) << R_VECT_MASK_CLR__scsi1__BITNR) | \
- (R_VECT_MASK_CLR__scsi0__##f21_##_VAL(R_VECT_MASK_CLR_, scsi0_, v21) << R_VECT_MASK_CLR__scsi0__BITNR) | \
- (R_VECT_MASK_CLR__timer1__##f22_##_VAL(R_VECT_MASK_CLR_, timer1_, v22) << R_VECT_MASK_CLR__timer1__BITNR) | \
- (R_VECT_MASK_CLR__timer0__##f23_##_VAL(R_VECT_MASK_CLR_, timer0_, v23) << R_VECT_MASK_CLR__timer0__BITNR) | \
- (R_VECT_MASK_CLR__nmi__##f24_##_VAL(R_VECT_MASK_CLR_, nmi_, v24) << R_VECT_MASK_CLR__nmi__BITNR) | \
- (R_VECT_MASK_CLR__some__##f25_##_VAL(R_VECT_MASK_CLR_, some_, v25) << R_VECT_MASK_CLR__some__BITNR) \
-)
-
-#endif
-
-/*
- * R_VECT_MASK_RD
- * - type: RO
- * - addr: 0xb00000d8
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_VECT_MASK_RD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_VECT_MASK_RD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_VECT_MASK_RD__usb__##f1##__MASK & REG__##v1) | \
- (R_VECT_MASK_RD__dma9__##f2##__MASK & REG__##v2) | \
- (R_VECT_MASK_RD__dma8__##f3##__MASK & REG__##v3) | \
- (R_VECT_MASK_RD__dma7__##f4##__MASK & REG__##v4) | \
- (R_VECT_MASK_RD__dma6__##f5##__MASK & REG__##v5) | \
- (R_VECT_MASK_RD__dma5__##f6##__MASK & REG__##v6) | \
- (R_VECT_MASK_RD__dma4__##f7##__MASK & REG__##v7) | \
- (R_VECT_MASK_RD__dma3__##f8##__MASK & REG__##v8) | \
- (R_VECT_MASK_RD__dma2__##f9##__MASK & REG__##v9) | \
- (R_VECT_MASK_RD__dma1__##f10##__MASK & REG__##v10) | \
- (R_VECT_MASK_RD__dma0__##f11##__MASK & REG__##v11) | \
- (R_VECT_MASK_RD__ext_dma1__##f12##__MASK & REG__##v12) | \
- (R_VECT_MASK_RD__ext_dma0__##f13##__MASK & REG__##v13) | \
- (R_VECT_MASK_RD__pa__##f14##__MASK & REG__##v14) | \
- (R_VECT_MASK_RD__irq_intnr__##f15##__MASK & REG__##v15) | \
- (R_VECT_MASK_RD__sw__##f16##__MASK & REG__##v16) | \
- (R_VECT_MASK_RD__serial__##f17##__MASK & REG__##v17) | \
- (R_VECT_MASK_RD__snmp__##f18##__MASK & REG__##v18) | \
- (R_VECT_MASK_RD__network__##f19##__MASK & REG__##v19) | \
- (R_VECT_MASK_RD__scsi1__##f20##__MASK & REG__##v20) | \
- (R_VECT_MASK_RD__scsi0__##f21##__MASK & REG__##v21) | \
- (R_VECT_MASK_RD__timer1__##f22##__MASK & REG__##v22) | \
- (R_VECT_MASK_RD__timer0__##f23##__MASK & REG__##v23) | \
- (R_VECT_MASK_RD__nmi__##f24##__MASK & REG__##v24) | \
- (R_VECT_MASK_RD__some__##f25##__MASK & REG__##v25) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_VECT_MASK_RD
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_VECT_MASK_RD.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_VECT_MASK_RD(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_VECT_MASK_RD__usb__##f1##__VAL(R_VECT_MASK_RD_, usb_, v1) << R_VECT_MASK_RD__usb__BITNR) | \
- (R_VECT_MASK_RD__dma9__##f2##__VAL(R_VECT_MASK_RD_, dma9_, v2) << R_VECT_MASK_RD__dma9__BITNR) | \
- (R_VECT_MASK_RD__dma8__##f3##__VAL(R_VECT_MASK_RD_, dma8_, v3) << R_VECT_MASK_RD__dma8__BITNR) | \
- (R_VECT_MASK_RD__dma7__##f4##__VAL(R_VECT_MASK_RD_, dma7_, v4) << R_VECT_MASK_RD__dma7__BITNR) | \
- (R_VECT_MASK_RD__dma6__##f5##__VAL(R_VECT_MASK_RD_, dma6_, v5) << R_VECT_MASK_RD__dma6__BITNR) | \
- (R_VECT_MASK_RD__dma5__##f6##__VAL(R_VECT_MASK_RD_, dma5_, v6) << R_VECT_MASK_RD__dma5__BITNR) | \
- (R_VECT_MASK_RD__dma4__##f7##__VAL(R_VECT_MASK_RD_, dma4_, v7) << R_VECT_MASK_RD__dma4__BITNR) | \
- (R_VECT_MASK_RD__dma3__##f8##__VAL(R_VECT_MASK_RD_, dma3_, v8) << R_VECT_MASK_RD__dma3__BITNR) | \
- (R_VECT_MASK_RD__dma2__##f9##__VAL(R_VECT_MASK_RD_, dma2_, v9) << R_VECT_MASK_RD__dma2__BITNR) | \
- (R_VECT_MASK_RD__dma1__##f10##__VAL(R_VECT_MASK_RD_, dma1_, v10) << R_VECT_MASK_RD__dma1__BITNR) | \
- (R_VECT_MASK_RD__dma0__##f11##__VAL(R_VECT_MASK_RD_, dma0_, v11) << R_VECT_MASK_RD__dma0__BITNR) | \
- (R_VECT_MASK_RD__ext_dma1__##f12##__VAL(R_VECT_MASK_RD_, ext_dma1_, v12) << R_VECT_MASK_RD__ext_dma1__BITNR) | \
- (R_VECT_MASK_RD__ext_dma0__##f13##__VAL(R_VECT_MASK_RD_, ext_dma0_, v13) << R_VECT_MASK_RD__ext_dma0__BITNR) | \
- (R_VECT_MASK_RD__pa__##f14##__VAL(R_VECT_MASK_RD_, pa_, v14) << R_VECT_MASK_RD__pa__BITNR) | \
- (R_VECT_MASK_RD__irq_intnr__##f15##__VAL(R_VECT_MASK_RD_, irq_intnr_, v15) << R_VECT_MASK_RD__irq_intnr__BITNR) | \
- (R_VECT_MASK_RD__sw__##f16##__VAL(R_VECT_MASK_RD_, sw_, v16) << R_VECT_MASK_RD__sw__BITNR) | \
- (R_VECT_MASK_RD__serial__##f17##__VAL(R_VECT_MASK_RD_, serial_, v17) << R_VECT_MASK_RD__serial__BITNR) | \
- (R_VECT_MASK_RD__snmp__##f18##__VAL(R_VECT_MASK_RD_, snmp_, v18) << R_VECT_MASK_RD__snmp__BITNR) | \
- (R_VECT_MASK_RD__network__##f19##__VAL(R_VECT_MASK_RD_, network_, v19) << R_VECT_MASK_RD__network__BITNR) | \
- (R_VECT_MASK_RD__scsi1__##f20##__VAL(R_VECT_MASK_RD_, scsi1_, v20) << R_VECT_MASK_RD__scsi1__BITNR) | \
- (R_VECT_MASK_RD__scsi0__##f21##__VAL(R_VECT_MASK_RD_, scsi0_, v21) << R_VECT_MASK_RD__scsi0__BITNR) | \
- (R_VECT_MASK_RD__timer1__##f22##__VAL(R_VECT_MASK_RD_, timer1_, v22) << R_VECT_MASK_RD__timer1__BITNR) | \
- (R_VECT_MASK_RD__timer0__##f23##__VAL(R_VECT_MASK_RD_, timer0_, v23) << R_VECT_MASK_RD__timer0__BITNR) | \
- (R_VECT_MASK_RD__nmi__##f24##__VAL(R_VECT_MASK_RD_, nmi_, v24) << R_VECT_MASK_RD__nmi__BITNR) | \
- (R_VECT_MASK_RD__some__##f25##__VAL(R_VECT_MASK_RD_, some_, v25) << R_VECT_MASK_RD__some__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_VECT_MASK_RD_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_VECT_MASK_RD.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_VECT_MASK_RD_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25) ( \
- (R_VECT_MASK_RD__usb__##f1_##_VAL(R_VECT_MASK_RD_, usb_, v1) << R_VECT_MASK_RD__usb__BITNR) | \
- (R_VECT_MASK_RD__dma9__##f2_##_VAL(R_VECT_MASK_RD_, dma9_, v2) << R_VECT_MASK_RD__dma9__BITNR) | \
- (R_VECT_MASK_RD__dma8__##f3_##_VAL(R_VECT_MASK_RD_, dma8_, v3) << R_VECT_MASK_RD__dma8__BITNR) | \
- (R_VECT_MASK_RD__dma7__##f4_##_VAL(R_VECT_MASK_RD_, dma7_, v4) << R_VECT_MASK_RD__dma7__BITNR) | \
- (R_VECT_MASK_RD__dma6__##f5_##_VAL(R_VECT_MASK_RD_, dma6_, v5) << R_VECT_MASK_RD__dma6__BITNR) | \
- (R_VECT_MASK_RD__dma5__##f6_##_VAL(R_VECT_MASK_RD_, dma5_, v6) << R_VECT_MASK_RD__dma5__BITNR) | \
- (R_VECT_MASK_RD__dma4__##f7_##_VAL(R_VECT_MASK_RD_, dma4_, v7) << R_VECT_MASK_RD__dma4__BITNR) | \
- (R_VECT_MASK_RD__dma3__##f8_##_VAL(R_VECT_MASK_RD_, dma3_, v8) << R_VECT_MASK_RD__dma3__BITNR) | \
- (R_VECT_MASK_RD__dma2__##f9_##_VAL(R_VECT_MASK_RD_, dma2_, v9) << R_VECT_MASK_RD__dma2__BITNR) | \
- (R_VECT_MASK_RD__dma1__##f10_##_VAL(R_VECT_MASK_RD_, dma1_, v10) << R_VECT_MASK_RD__dma1__BITNR) | \
- (R_VECT_MASK_RD__dma0__##f11_##_VAL(R_VECT_MASK_RD_, dma0_, v11) << R_VECT_MASK_RD__dma0__BITNR) | \
- (R_VECT_MASK_RD__ext_dma1__##f12_##_VAL(R_VECT_MASK_RD_, ext_dma1_, v12) << R_VECT_MASK_RD__ext_dma1__BITNR) | \
- (R_VECT_MASK_RD__ext_dma0__##f13_##_VAL(R_VECT_MASK_RD_, ext_dma0_, v13) << R_VECT_MASK_RD__ext_dma0__BITNR) | \
- (R_VECT_MASK_RD__pa__##f14_##_VAL(R_VECT_MASK_RD_, pa_, v14) << R_VECT_MASK_RD__pa__BITNR) | \
- (R_VECT_MASK_RD__irq_intnr__##f15_##_VAL(R_VECT_MASK_RD_, irq_intnr_, v15) << R_VECT_MASK_RD__irq_intnr__BITNR) | \
- (R_VECT_MASK_RD__sw__##f16_##_VAL(R_VECT_MASK_RD_, sw_, v16) << R_VECT_MASK_RD__sw__BITNR) | \
- (R_VECT_MASK_RD__serial__##f17_##_VAL(R_VECT_MASK_RD_, serial_, v17) << R_VECT_MASK_RD__serial__BITNR) | \
- (R_VECT_MASK_RD__snmp__##f18_##_VAL(R_VECT_MASK_RD_, snmp_, v18) << R_VECT_MASK_RD__snmp__BITNR) | \
- (R_VECT_MASK_RD__network__##f19_##_VAL(R_VECT_MASK_RD_, network_, v19) << R_VECT_MASK_RD__network__BITNR) | \
- (R_VECT_MASK_RD__scsi1__##f20_##_VAL(R_VECT_MASK_RD_, scsi1_, v20) << R_VECT_MASK_RD__scsi1__BITNR) | \
- (R_VECT_MASK_RD__scsi0__##f21_##_VAL(R_VECT_MASK_RD_, scsi0_, v21) << R_VECT_MASK_RD__scsi0__BITNR) | \
- (R_VECT_MASK_RD__timer1__##f22_##_VAL(R_VECT_MASK_RD_, timer1_, v22) << R_VECT_MASK_RD__timer1__BITNR) | \
- (R_VECT_MASK_RD__timer0__##f23_##_VAL(R_VECT_MASK_RD_, timer0_, v23) << R_VECT_MASK_RD__timer0__BITNR) | \
- (R_VECT_MASK_RD__nmi__##f24_##_VAL(R_VECT_MASK_RD_, nmi_, v24) << R_VECT_MASK_RD__nmi__BITNR) | \
- (R_VECT_MASK_RD__some__##f25_##_VAL(R_VECT_MASK_RD_, some_, v25) << R_VECT_MASK_RD__some__BITNR) \
-)
-
-#endif
-
-/*
- * R_VECT_MASK_SET
- * - type: WO
- * - addr: 0xb00000dc
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_VECT_MASK_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_VECT_MASK_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_VECT_MASK_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_VECT_MASK_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- *R_VECT_MASK_SET__SADDR = ( \
- REG_INITIATED(R_VECT_MASK_SET_) \
- REG_VAL__R_VECT_MASK_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25) \
- ), \
- R_VECT_MASK_SET__WRITE(R_VECT_MASK_SET__ADDR, *R_VECT_MASK_SET__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_VECT_MASK_SET__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_VECT_MASK_SET.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_VECT_MASK_SET.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_VECT_MASK_SET__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- *R_VECT_MASK_SET__SADDR = ( \
- REG_INITIATED(R_VECT_MASK_SET_) \
- REG_VAL__R_VECT_MASK_SET_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12,f13##_,v13,f14##_,v14,f15##_,v15,f16##_,v16,f17##_,v17,f18##_,v18,f19##_,v19,f20##_,v20,f21##_,v21,f22##_,v22,f23##_,v23,f24##_,v24,f25##_,v25) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_VECT_MASK_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_VECT_MASK_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_VECT_MASK_SET__usb__##f1##__MASK & REG__##v1) | \
- (R_VECT_MASK_SET__dma9__##f2##__MASK & REG__##v2) | \
- (R_VECT_MASK_SET__dma8__##f3##__MASK & REG__##v3) | \
- (R_VECT_MASK_SET__dma7__##f4##__MASK & REG__##v4) | \
- (R_VECT_MASK_SET__dma6__##f5##__MASK & REG__##v5) | \
- (R_VECT_MASK_SET__dma5__##f6##__MASK & REG__##v6) | \
- (R_VECT_MASK_SET__dma4__##f7##__MASK & REG__##v7) | \
- (R_VECT_MASK_SET__dma3__##f8##__MASK & REG__##v8) | \
- (R_VECT_MASK_SET__dma2__##f9##__MASK & REG__##v9) | \
- (R_VECT_MASK_SET__dma1__##f10##__MASK & REG__##v10) | \
- (R_VECT_MASK_SET__dma0__##f11##__MASK & REG__##v11) | \
- (R_VECT_MASK_SET__ext_dma1__##f12##__MASK & REG__##v12) | \
- (R_VECT_MASK_SET__ext_dma0__##f13##__MASK & REG__##v13) | \
- (R_VECT_MASK_SET__pa__##f14##__MASK & REG__##v14) | \
- (R_VECT_MASK_SET__irq_intnr__##f15##__MASK & REG__##v15) | \
- (R_VECT_MASK_SET__sw__##f16##__MASK & REG__##v16) | \
- (R_VECT_MASK_SET__serial__##f17##__MASK & REG__##v17) | \
- (R_VECT_MASK_SET__snmp__##f18##__MASK & REG__##v18) | \
- (R_VECT_MASK_SET__network__##f19##__MASK & REG__##v19) | \
- (R_VECT_MASK_SET__scsi1__##f20##__MASK & REG__##v20) | \
- (R_VECT_MASK_SET__scsi0__##f21##__MASK & REG__##v21) | \
- (R_VECT_MASK_SET__timer1__##f22##__MASK & REG__##v22) | \
- (R_VECT_MASK_SET__timer0__##f23##__MASK & REG__##v23) | \
- (R_VECT_MASK_SET__nmi__##f24##__MASK & REG__##v24) | \
- (R_VECT_MASK_SET__some__##f25##__MASK & REG__##v25) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_VECT_MASK_SET
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_VECT_MASK_SET.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_VECT_MASK_SET(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_VECT_MASK_SET__usb__##f1##__VAL(R_VECT_MASK_SET_, usb_, v1) << R_VECT_MASK_SET__usb__BITNR) | \
- (R_VECT_MASK_SET__dma9__##f2##__VAL(R_VECT_MASK_SET_, dma9_, v2) << R_VECT_MASK_SET__dma9__BITNR) | \
- (R_VECT_MASK_SET__dma8__##f3##__VAL(R_VECT_MASK_SET_, dma8_, v3) << R_VECT_MASK_SET__dma8__BITNR) | \
- (R_VECT_MASK_SET__dma7__##f4##__VAL(R_VECT_MASK_SET_, dma7_, v4) << R_VECT_MASK_SET__dma7__BITNR) | \
- (R_VECT_MASK_SET__dma6__##f5##__VAL(R_VECT_MASK_SET_, dma6_, v5) << R_VECT_MASK_SET__dma6__BITNR) | \
- (R_VECT_MASK_SET__dma5__##f6##__VAL(R_VECT_MASK_SET_, dma5_, v6) << R_VECT_MASK_SET__dma5__BITNR) | \
- (R_VECT_MASK_SET__dma4__##f7##__VAL(R_VECT_MASK_SET_, dma4_, v7) << R_VECT_MASK_SET__dma4__BITNR) | \
- (R_VECT_MASK_SET__dma3__##f8##__VAL(R_VECT_MASK_SET_, dma3_, v8) << R_VECT_MASK_SET__dma3__BITNR) | \
- (R_VECT_MASK_SET__dma2__##f9##__VAL(R_VECT_MASK_SET_, dma2_, v9) << R_VECT_MASK_SET__dma2__BITNR) | \
- (R_VECT_MASK_SET__dma1__##f10##__VAL(R_VECT_MASK_SET_, dma1_, v10) << R_VECT_MASK_SET__dma1__BITNR) | \
- (R_VECT_MASK_SET__dma0__##f11##__VAL(R_VECT_MASK_SET_, dma0_, v11) << R_VECT_MASK_SET__dma0__BITNR) | \
- (R_VECT_MASK_SET__ext_dma1__##f12##__VAL(R_VECT_MASK_SET_, ext_dma1_, v12) << R_VECT_MASK_SET__ext_dma1__BITNR) | \
- (R_VECT_MASK_SET__ext_dma0__##f13##__VAL(R_VECT_MASK_SET_, ext_dma0_, v13) << R_VECT_MASK_SET__ext_dma0__BITNR) | \
- (R_VECT_MASK_SET__pa__##f14##__VAL(R_VECT_MASK_SET_, pa_, v14) << R_VECT_MASK_SET__pa__BITNR) | \
- (R_VECT_MASK_SET__irq_intnr__##f15##__VAL(R_VECT_MASK_SET_, irq_intnr_, v15) << R_VECT_MASK_SET__irq_intnr__BITNR) | \
- (R_VECT_MASK_SET__sw__##f16##__VAL(R_VECT_MASK_SET_, sw_, v16) << R_VECT_MASK_SET__sw__BITNR) | \
- (R_VECT_MASK_SET__serial__##f17##__VAL(R_VECT_MASK_SET_, serial_, v17) << R_VECT_MASK_SET__serial__BITNR) | \
- (R_VECT_MASK_SET__snmp__##f18##__VAL(R_VECT_MASK_SET_, snmp_, v18) << R_VECT_MASK_SET__snmp__BITNR) | \
- (R_VECT_MASK_SET__network__##f19##__VAL(R_VECT_MASK_SET_, network_, v19) << R_VECT_MASK_SET__network__BITNR) | \
- (R_VECT_MASK_SET__scsi1__##f20##__VAL(R_VECT_MASK_SET_, scsi1_, v20) << R_VECT_MASK_SET__scsi1__BITNR) | \
- (R_VECT_MASK_SET__scsi0__##f21##__VAL(R_VECT_MASK_SET_, scsi0_, v21) << R_VECT_MASK_SET__scsi0__BITNR) | \
- (R_VECT_MASK_SET__timer1__##f22##__VAL(R_VECT_MASK_SET_, timer1_, v22) << R_VECT_MASK_SET__timer1__BITNR) | \
- (R_VECT_MASK_SET__timer0__##f23##__VAL(R_VECT_MASK_SET_, timer0_, v23) << R_VECT_MASK_SET__timer0__BITNR) | \
- (R_VECT_MASK_SET__nmi__##f24##__VAL(R_VECT_MASK_SET_, nmi_, v24) << R_VECT_MASK_SET__nmi__BITNR) | \
- (R_VECT_MASK_SET__some__##f25##__VAL(R_VECT_MASK_SET_, some_, v25) << R_VECT_MASK_SET__some__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_VECT_MASK_SET_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_VECT_MASK_SET.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_VECT_MASK_SET_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25) ( \
- (R_VECT_MASK_SET__usb__##f1_##_VAL(R_VECT_MASK_SET_, usb_, v1) << R_VECT_MASK_SET__usb__BITNR) | \
- (R_VECT_MASK_SET__dma9__##f2_##_VAL(R_VECT_MASK_SET_, dma9_, v2) << R_VECT_MASK_SET__dma9__BITNR) | \
- (R_VECT_MASK_SET__dma8__##f3_##_VAL(R_VECT_MASK_SET_, dma8_, v3) << R_VECT_MASK_SET__dma8__BITNR) | \
- (R_VECT_MASK_SET__dma7__##f4_##_VAL(R_VECT_MASK_SET_, dma7_, v4) << R_VECT_MASK_SET__dma7__BITNR) | \
- (R_VECT_MASK_SET__dma6__##f5_##_VAL(R_VECT_MASK_SET_, dma6_, v5) << R_VECT_MASK_SET__dma6__BITNR) | \
- (R_VECT_MASK_SET__dma5__##f6_##_VAL(R_VECT_MASK_SET_, dma5_, v6) << R_VECT_MASK_SET__dma5__BITNR) | \
- (R_VECT_MASK_SET__dma4__##f7_##_VAL(R_VECT_MASK_SET_, dma4_, v7) << R_VECT_MASK_SET__dma4__BITNR) | \
- (R_VECT_MASK_SET__dma3__##f8_##_VAL(R_VECT_MASK_SET_, dma3_, v8) << R_VECT_MASK_SET__dma3__BITNR) | \
- (R_VECT_MASK_SET__dma2__##f9_##_VAL(R_VECT_MASK_SET_, dma2_, v9) << R_VECT_MASK_SET__dma2__BITNR) | \
- (R_VECT_MASK_SET__dma1__##f10_##_VAL(R_VECT_MASK_SET_, dma1_, v10) << R_VECT_MASK_SET__dma1__BITNR) | \
- (R_VECT_MASK_SET__dma0__##f11_##_VAL(R_VECT_MASK_SET_, dma0_, v11) << R_VECT_MASK_SET__dma0__BITNR) | \
- (R_VECT_MASK_SET__ext_dma1__##f12_##_VAL(R_VECT_MASK_SET_, ext_dma1_, v12) << R_VECT_MASK_SET__ext_dma1__BITNR) | \
- (R_VECT_MASK_SET__ext_dma0__##f13_##_VAL(R_VECT_MASK_SET_, ext_dma0_, v13) << R_VECT_MASK_SET__ext_dma0__BITNR) | \
- (R_VECT_MASK_SET__pa__##f14_##_VAL(R_VECT_MASK_SET_, pa_, v14) << R_VECT_MASK_SET__pa__BITNR) | \
- (R_VECT_MASK_SET__irq_intnr__##f15_##_VAL(R_VECT_MASK_SET_, irq_intnr_, v15) << R_VECT_MASK_SET__irq_intnr__BITNR) | \
- (R_VECT_MASK_SET__sw__##f16_##_VAL(R_VECT_MASK_SET_, sw_, v16) << R_VECT_MASK_SET__sw__BITNR) | \
- (R_VECT_MASK_SET__serial__##f17_##_VAL(R_VECT_MASK_SET_, serial_, v17) << R_VECT_MASK_SET__serial__BITNR) | \
- (R_VECT_MASK_SET__snmp__##f18_##_VAL(R_VECT_MASK_SET_, snmp_, v18) << R_VECT_MASK_SET__snmp__BITNR) | \
- (R_VECT_MASK_SET__network__##f19_##_VAL(R_VECT_MASK_SET_, network_, v19) << R_VECT_MASK_SET__network__BITNR) | \
- (R_VECT_MASK_SET__scsi1__##f20_##_VAL(R_VECT_MASK_SET_, scsi1_, v20) << R_VECT_MASK_SET__scsi1__BITNR) | \
- (R_VECT_MASK_SET__scsi0__##f21_##_VAL(R_VECT_MASK_SET_, scsi0_, v21) << R_VECT_MASK_SET__scsi0__BITNR) | \
- (R_VECT_MASK_SET__timer1__##f22_##_VAL(R_VECT_MASK_SET_, timer1_, v22) << R_VECT_MASK_SET__timer1__BITNR) | \
- (R_VECT_MASK_SET__timer0__##f23_##_VAL(R_VECT_MASK_SET_, timer0_, v23) << R_VECT_MASK_SET__timer0__BITNR) | \
- (R_VECT_MASK_SET__nmi__##f24_##_VAL(R_VECT_MASK_SET_, nmi_, v24) << R_VECT_MASK_SET__nmi__BITNR) | \
- (R_VECT_MASK_SET__some__##f25_##_VAL(R_VECT_MASK_SET_, some_, v25) << R_VECT_MASK_SET__some__BITNR) \
-)
-
-#endif
-
-/*
- * R_VECT_READ
- * - type: RO
- * - addr: 0xb00000dc
- * - group: Interrupt mask and status registers
- */
-
-#if USE_GROUP__Interrupt_mask_and_status_registers
-
-/* No REG_SET__register-name for read only registers. */
-
-/* No REG_SET__register-name__SHADOW for read only and read write registers. */
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_VECT_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_VECT_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_VECT_READ__usb__##f1##__MASK & REG__##v1) | \
- (R_VECT_READ__dma9__##f2##__MASK & REG__##v2) | \
- (R_VECT_READ__dma8__##f3##__MASK & REG__##v3) | \
- (R_VECT_READ__dma7__##f4##__MASK & REG__##v4) | \
- (R_VECT_READ__dma6__##f5##__MASK & REG__##v5) | \
- (R_VECT_READ__dma5__##f6##__MASK & REG__##v6) | \
- (R_VECT_READ__dma4__##f7##__MASK & REG__##v7) | \
- (R_VECT_READ__dma3__##f8##__MASK & REG__##v8) | \
- (R_VECT_READ__dma2__##f9##__MASK & REG__##v9) | \
- (R_VECT_READ__dma1__##f10##__MASK & REG__##v10) | \
- (R_VECT_READ__dma0__##f11##__MASK & REG__##v11) | \
- (R_VECT_READ__ext_dma1__##f12##__MASK & REG__##v12) | \
- (R_VECT_READ__ext_dma0__##f13##__MASK & REG__##v13) | \
- (R_VECT_READ__pa__##f14##__MASK & REG__##v14) | \
- (R_VECT_READ__irq_intnr__##f15##__MASK & REG__##v15) | \
- (R_VECT_READ__sw__##f16##__MASK & REG__##v16) | \
- (R_VECT_READ__serial__##f17##__MASK & REG__##v17) | \
- (R_VECT_READ__snmp__##f18##__MASK & REG__##v18) | \
- (R_VECT_READ__network__##f19##__MASK & REG__##v19) | \
- (R_VECT_READ__scsi1__##f20##__MASK & REG__##v20) | \
- (R_VECT_READ__scsi0__##f21##__MASK & REG__##v21) | \
- (R_VECT_READ__timer1__##f22##__MASK & REG__##v22) | \
- (R_VECT_READ__timer0__##f23##__MASK & REG__##v23) | \
- (R_VECT_READ__nmi__##f24##__MASK & REG__##v24) | \
- (R_VECT_READ__some__##f25##__MASK & REG__##v25) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_VECT_READ
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_VECT_READ.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_VECT_READ(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12,f13,v13,f14,v14,f15,v15,f16,v16,f17,v17,f18,v18,f19,v19,f20,v20,f21,v21,f22,v22,f23,v23,f24,v24,f25,v25) ( \
- (R_VECT_READ__usb__##f1##__VAL(R_VECT_READ_, usb_, v1) << R_VECT_READ__usb__BITNR) | \
- (R_VECT_READ__dma9__##f2##__VAL(R_VECT_READ_, dma9_, v2) << R_VECT_READ__dma9__BITNR) | \
- (R_VECT_READ__dma8__##f3##__VAL(R_VECT_READ_, dma8_, v3) << R_VECT_READ__dma8__BITNR) | \
- (R_VECT_READ__dma7__##f4##__VAL(R_VECT_READ_, dma7_, v4) << R_VECT_READ__dma7__BITNR) | \
- (R_VECT_READ__dma6__##f5##__VAL(R_VECT_READ_, dma6_, v5) << R_VECT_READ__dma6__BITNR) | \
- (R_VECT_READ__dma5__##f6##__VAL(R_VECT_READ_, dma5_, v6) << R_VECT_READ__dma5__BITNR) | \
- (R_VECT_READ__dma4__##f7##__VAL(R_VECT_READ_, dma4_, v7) << R_VECT_READ__dma4__BITNR) | \
- (R_VECT_READ__dma3__##f8##__VAL(R_VECT_READ_, dma3_, v8) << R_VECT_READ__dma3__BITNR) | \
- (R_VECT_READ__dma2__##f9##__VAL(R_VECT_READ_, dma2_, v9) << R_VECT_READ__dma2__BITNR) | \
- (R_VECT_READ__dma1__##f10##__VAL(R_VECT_READ_, dma1_, v10) << R_VECT_READ__dma1__BITNR) | \
- (R_VECT_READ__dma0__##f11##__VAL(R_VECT_READ_, dma0_, v11) << R_VECT_READ__dma0__BITNR) | \
- (R_VECT_READ__ext_dma1__##f12##__VAL(R_VECT_READ_, ext_dma1_, v12) << R_VECT_READ__ext_dma1__BITNR) | \
- (R_VECT_READ__ext_dma0__##f13##__VAL(R_VECT_READ_, ext_dma0_, v13) << R_VECT_READ__ext_dma0__BITNR) | \
- (R_VECT_READ__pa__##f14##__VAL(R_VECT_READ_, pa_, v14) << R_VECT_READ__pa__BITNR) | \
- (R_VECT_READ__irq_intnr__##f15##__VAL(R_VECT_READ_, irq_intnr_, v15) << R_VECT_READ__irq_intnr__BITNR) | \
- (R_VECT_READ__sw__##f16##__VAL(R_VECT_READ_, sw_, v16) << R_VECT_READ__sw__BITNR) | \
- (R_VECT_READ__serial__##f17##__VAL(R_VECT_READ_, serial_, v17) << R_VECT_READ__serial__BITNR) | \
- (R_VECT_READ__snmp__##f18##__VAL(R_VECT_READ_, snmp_, v18) << R_VECT_READ__snmp__BITNR) | \
- (R_VECT_READ__network__##f19##__VAL(R_VECT_READ_, network_, v19) << R_VECT_READ__network__BITNR) | \
- (R_VECT_READ__scsi1__##f20##__VAL(R_VECT_READ_, scsi1_, v20) << R_VECT_READ__scsi1__BITNR) | \
- (R_VECT_READ__scsi0__##f21##__VAL(R_VECT_READ_, scsi0_, v21) << R_VECT_READ__scsi0__BITNR) | \
- (R_VECT_READ__timer1__##f22##__VAL(R_VECT_READ_, timer1_, v22) << R_VECT_READ__timer1__BITNR) | \
- (R_VECT_READ__timer0__##f23##__VAL(R_VECT_READ_, timer0_, v23) << R_VECT_READ__timer0__BITNR) | \
- (R_VECT_READ__nmi__##f24##__VAL(R_VECT_READ_, nmi_, v24) << R_VECT_READ__nmi__BITNR) | \
- (R_VECT_READ__some__##f25##__VAL(R_VECT_READ_, some_, v25) << R_VECT_READ__some__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_VECT_READ_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_VECT_READ.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_VECT_READ_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12,f13_,v13,f14_,v14,f15_,v15,f16_,v16,f17_,v17,f18_,v18,f19_,v19,f20_,v20,f21_,v21,f22_,v22,f23_,v23,f24_,v24,f25_,v25) ( \
- (R_VECT_READ__usb__##f1_##_VAL(R_VECT_READ_, usb_, v1) << R_VECT_READ__usb__BITNR) | \
- (R_VECT_READ__dma9__##f2_##_VAL(R_VECT_READ_, dma9_, v2) << R_VECT_READ__dma9__BITNR) | \
- (R_VECT_READ__dma8__##f3_##_VAL(R_VECT_READ_, dma8_, v3) << R_VECT_READ__dma8__BITNR) | \
- (R_VECT_READ__dma7__##f4_##_VAL(R_VECT_READ_, dma7_, v4) << R_VECT_READ__dma7__BITNR) | \
- (R_VECT_READ__dma6__##f5_##_VAL(R_VECT_READ_, dma6_, v5) << R_VECT_READ__dma6__BITNR) | \
- (R_VECT_READ__dma5__##f6_##_VAL(R_VECT_READ_, dma5_, v6) << R_VECT_READ__dma5__BITNR) | \
- (R_VECT_READ__dma4__##f7_##_VAL(R_VECT_READ_, dma4_, v7) << R_VECT_READ__dma4__BITNR) | \
- (R_VECT_READ__dma3__##f8_##_VAL(R_VECT_READ_, dma3_, v8) << R_VECT_READ__dma3__BITNR) | \
- (R_VECT_READ__dma2__##f9_##_VAL(R_VECT_READ_, dma2_, v9) << R_VECT_READ__dma2__BITNR) | \
- (R_VECT_READ__dma1__##f10_##_VAL(R_VECT_READ_, dma1_, v10) << R_VECT_READ__dma1__BITNR) | \
- (R_VECT_READ__dma0__##f11_##_VAL(R_VECT_READ_, dma0_, v11) << R_VECT_READ__dma0__BITNR) | \
- (R_VECT_READ__ext_dma1__##f12_##_VAL(R_VECT_READ_, ext_dma1_, v12) << R_VECT_READ__ext_dma1__BITNR) | \
- (R_VECT_READ__ext_dma0__##f13_##_VAL(R_VECT_READ_, ext_dma0_, v13) << R_VECT_READ__ext_dma0__BITNR) | \
- (R_VECT_READ__pa__##f14_##_VAL(R_VECT_READ_, pa_, v14) << R_VECT_READ__pa__BITNR) | \
- (R_VECT_READ__irq_intnr__##f15_##_VAL(R_VECT_READ_, irq_intnr_, v15) << R_VECT_READ__irq_intnr__BITNR) | \
- (R_VECT_READ__sw__##f16_##_VAL(R_VECT_READ_, sw_, v16) << R_VECT_READ__sw__BITNR) | \
- (R_VECT_READ__serial__##f17_##_VAL(R_VECT_READ_, serial_, v17) << R_VECT_READ__serial__BITNR) | \
- (R_VECT_READ__snmp__##f18_##_VAL(R_VECT_READ_, snmp_, v18) << R_VECT_READ__snmp__BITNR) | \
- (R_VECT_READ__network__##f19_##_VAL(R_VECT_READ_, network_, v19) << R_VECT_READ__network__BITNR) | \
- (R_VECT_READ__scsi1__##f20_##_VAL(R_VECT_READ_, scsi1_, v20) << R_VECT_READ__scsi1__BITNR) | \
- (R_VECT_READ__scsi0__##f21_##_VAL(R_VECT_READ_, scsi0_, v21) << R_VECT_READ__scsi0__BITNR) | \
- (R_VECT_READ__timer1__##f22_##_VAL(R_VECT_READ_, timer1_, v22) << R_VECT_READ__timer1__BITNR) | \
- (R_VECT_READ__timer0__##f23_##_VAL(R_VECT_READ_, timer0_, v23) << R_VECT_READ__timer0__BITNR) | \
- (R_VECT_READ__nmi__##f24_##_VAL(R_VECT_READ_, nmi_, v24) << R_VECT_READ__nmi__BITNR) | \
- (R_VECT_READ__some__##f25_##_VAL(R_VECT_READ_, some_, v25) << R_VECT_READ__some__BITNR) \
-)
-
-#endif
-
-/*
- * R_WAITSTATES
- * - type: WO
- * - addr: 0xb0000000
- * - group: Bus interface configuration registers
- */
-
-#if USE_GROUP__Bus_interface_configuration_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_WAITSTATES
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_WAITSTATES.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_WAITSTATES.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_WAITSTATES(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- *R_WAITSTATES__SADDR = ( \
- REG_INITIATED(R_WAITSTATES_) \
- REG_VAL__R_WAITSTATES_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) \
- ), \
- R_WAITSTATES__WRITE(R_WAITSTATES__ADDR, *R_WAITSTATES__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_WAITSTATES__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_WAITSTATES.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_WAITSTATES.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_WAITSTATES__SHADOW(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- *R_WAITSTATES__SADDR = ( \
- REG_INITIATED(R_WAITSTATES_) \
- REG_VAL__R_WAITSTATES_(f1##_,v1,f2##_,v2,f3##_,v3,f4##_,v4,f5##_,v5,f6##_,v6,f7##_,v7,f8##_,v8,f9##_,v9,f10##_,v10,f11##_,v11,f12##_,v12) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_WAITSTATES
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_WAITSTATES(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_WAITSTATES__pcs4_7_zw__##f1##__MASK & REG__##v1) | \
- (R_WAITSTATES__pcs4_7_ew__##f2##__MASK & REG__##v2) | \
- (R_WAITSTATES__pcs4_7_lw__##f3##__MASK & REG__##v3) | \
- (R_WAITSTATES__pcs0_3_zw__##f4##__MASK & REG__##v4) | \
- (R_WAITSTATES__pcs0_3_ew__##f5##__MASK & REG__##v5) | \
- (R_WAITSTATES__pcs0_3_lw__##f6##__MASK & REG__##v6) | \
- (R_WAITSTATES__sram_zw__##f7##__MASK & REG__##v7) | \
- (R_WAITSTATES__sram_ew__##f8##__MASK & REG__##v8) | \
- (R_WAITSTATES__sram_lw__##f9##__MASK & REG__##v9) | \
- (R_WAITSTATES__flash_zw__##f10##__MASK & REG__##v10) | \
- (R_WAITSTATES__flash_ew__##f11##__MASK & REG__##v11) | \
- (R_WAITSTATES__flash_lw__##f12##__MASK & REG__##v12) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_WAITSTATES
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_WAITSTATES.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_WAITSTATES(f1,v1,f2,v2,f3,v3,f4,v4,f5,v5,f6,v6,f7,v7,f8,v8,f9,v9,f10,v10,f11,v11,f12,v12) ( \
- (R_WAITSTATES__pcs4_7_zw__##f1##__VAL(R_WAITSTATES_, pcs4_7_zw_, v1) << R_WAITSTATES__pcs4_7_zw__BITNR) | \
- (R_WAITSTATES__pcs4_7_ew__##f2##__VAL(R_WAITSTATES_, pcs4_7_ew_, v2) << R_WAITSTATES__pcs4_7_ew__BITNR) | \
- (R_WAITSTATES__pcs4_7_lw__##f3##__VAL(R_WAITSTATES_, pcs4_7_lw_, v3) << R_WAITSTATES__pcs4_7_lw__BITNR) | \
- (R_WAITSTATES__pcs0_3_zw__##f4##__VAL(R_WAITSTATES_, pcs0_3_zw_, v4) << R_WAITSTATES__pcs0_3_zw__BITNR) | \
- (R_WAITSTATES__pcs0_3_ew__##f5##__VAL(R_WAITSTATES_, pcs0_3_ew_, v5) << R_WAITSTATES__pcs0_3_ew__BITNR) | \
- (R_WAITSTATES__pcs0_3_lw__##f6##__VAL(R_WAITSTATES_, pcs0_3_lw_, v6) << R_WAITSTATES__pcs0_3_lw__BITNR) | \
- (R_WAITSTATES__sram_zw__##f7##__VAL(R_WAITSTATES_, sram_zw_, v7) << R_WAITSTATES__sram_zw__BITNR) | \
- (R_WAITSTATES__sram_ew__##f8##__VAL(R_WAITSTATES_, sram_ew_, v8) << R_WAITSTATES__sram_ew__BITNR) | \
- (R_WAITSTATES__sram_lw__##f9##__VAL(R_WAITSTATES_, sram_lw_, v9) << R_WAITSTATES__sram_lw__BITNR) | \
- (R_WAITSTATES__flash_zw__##f10##__VAL(R_WAITSTATES_, flash_zw_, v10) << R_WAITSTATES__flash_zw__BITNR) | \
- (R_WAITSTATES__flash_ew__##f11##__VAL(R_WAITSTATES_, flash_ew_, v11) << R_WAITSTATES__flash_ew__BITNR) | \
- (R_WAITSTATES__flash_lw__##f12##__VAL(R_WAITSTATES_, flash_lw_, v12) << R_WAITSTATES__flash_lw__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_WAITSTATES_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_WAITSTATES.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_WAITSTATES_(f1_,v1,f2_,v2,f3_,v3,f4_,v4,f5_,v5,f6_,v6,f7_,v7,f8_,v8,f9_,v9,f10_,v10,f11_,v11,f12_,v12) ( \
- (R_WAITSTATES__pcs4_7_zw__##f1_##_VAL(R_WAITSTATES_, pcs4_7_zw_, v1) << R_WAITSTATES__pcs4_7_zw__BITNR) | \
- (R_WAITSTATES__pcs4_7_ew__##f2_##_VAL(R_WAITSTATES_, pcs4_7_ew_, v2) << R_WAITSTATES__pcs4_7_ew__BITNR) | \
- (R_WAITSTATES__pcs4_7_lw__##f3_##_VAL(R_WAITSTATES_, pcs4_7_lw_, v3) << R_WAITSTATES__pcs4_7_lw__BITNR) | \
- (R_WAITSTATES__pcs0_3_zw__##f4_##_VAL(R_WAITSTATES_, pcs0_3_zw_, v4) << R_WAITSTATES__pcs0_3_zw__BITNR) | \
- (R_WAITSTATES__pcs0_3_ew__##f5_##_VAL(R_WAITSTATES_, pcs0_3_ew_, v5) << R_WAITSTATES__pcs0_3_ew__BITNR) | \
- (R_WAITSTATES__pcs0_3_lw__##f6_##_VAL(R_WAITSTATES_, pcs0_3_lw_, v6) << R_WAITSTATES__pcs0_3_lw__BITNR) | \
- (R_WAITSTATES__sram_zw__##f7_##_VAL(R_WAITSTATES_, sram_zw_, v7) << R_WAITSTATES__sram_zw__BITNR) | \
- (R_WAITSTATES__sram_ew__##f8_##_VAL(R_WAITSTATES_, sram_ew_, v8) << R_WAITSTATES__sram_ew__BITNR) | \
- (R_WAITSTATES__sram_lw__##f9_##_VAL(R_WAITSTATES_, sram_lw_, v9) << R_WAITSTATES__sram_lw__BITNR) | \
- (R_WAITSTATES__flash_zw__##f10_##_VAL(R_WAITSTATES_, flash_zw_, v10) << R_WAITSTATES__flash_zw__BITNR) | \
- (R_WAITSTATES__flash_ew__##f11_##_VAL(R_WAITSTATES_, flash_ew_, v11) << R_WAITSTATES__flash_ew__BITNR) | \
- (R_WAITSTATES__flash_lw__##f12_##_VAL(R_WAITSTATES_, flash_lw_, v12) << R_WAITSTATES__flash_lw__BITNR) \
-)
-
-#endif
-
-/*
- * R_WATCHDOG
- * - type: WO
- * - addr: 0xb0000024
- * - group: Timer registers
- */
-
-#if USE_GROUP__Timer_registers
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_WATCHDOG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_WATCHDOG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in register
-*# R_WATCHDOG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_WATCHDOG(f1,v1,f2,v2) ( \
- *R_WATCHDOG__SADDR = ( \
- REG_INITIATED(R_WATCHDOG_) \
- REG_VAL__R_WATCHDOG_(f1##_,v1,f2##_,v2) \
- ), \
- R_WATCHDOG__WRITE(R_WATCHDOG__ADDR, *R_WATCHDOG__SADDR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_SET__R_WATCHDOG__SHADOW
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Integer value to write to field N.
-*#
-*# RETURNS : integer value written to register R_WATCHDOG.
-*#
-*# SIDE EFFECTS: REG_INITIATED evaluated.
-*#
-*# DESCRIPTION : Write value of vn parameters to fields fn in the
-*# shadow register for R_WATCHDOG.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_SET__R_WATCHDOG__SHADOW(f1,v1,f2,v2) ( \
- *R_WATCHDOG__SADDR = ( \
- REG_INITIATED(R_WATCHDOG_) \
- REG_VAL__R_WATCHDOG_(f1##_,v1,f2##_,v2) \
- ) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_MASK__R_WATCHDOG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : REG__on, or REG__off
-*#
-*# RETURNS : Integer value with 1s in all on-fields,
-*# and 0s in all off-fields.
-*#
-*# SIDE EFFECTS: None.
-*#
-*# DESCRIPTION : Create a mask with 1s in all fields with vn == REG__on,
-*# and 0s in fields with vn == REG_off.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson Only put ## where necessary to stop
-*# premature macro evaluation.
-*#**********************************************************************/
-
-#define REG_MASK__R_WATCHDOG(f1,v1,f2,v2) ( \
- (R_WATCHDOG__key__##f1##__MASK & REG__##v1) | \
- (R_WATCHDOG__enable__##f2##__MASK & REG__##v2) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_WATCHDOG
-*#
-*# PARAMETERS : fn : Name of field N.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_WATCHDOG.
-*# Parameters vn are checked for validity.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Apr 01 1998 Jan Bengtsson Initial version
-*# Oct 01 2002 Hans-Peter Nilsson To stop premature evaluation, append
-*# _ to fn parameters when passing
-*# on to other macros.
-*#**********************************************************************/
-
-#define REG_VAL__R_WATCHDOG(f1,v1,f2,v2) ( \
- (R_WATCHDOG__key__##f1##__VAL(R_WATCHDOG_, key_, v1) << R_WATCHDOG__key__BITNR) | \
- (R_WATCHDOG__enable__##f2##__VAL(R_WATCHDOG_, enable_, v2) << R_WATCHDOG__enable__BITNR) \
-)
-
-/*#**********************************************************************
-*#
-*# MACRO NAME : REG_VAL__R_WATCHDOG_
-*#
-*# PARAMETERS : fn_ : Name of field N, with "_" appended.
-*# vn : Value in field N.
-*#
-*# RETURNS : Integer value.
-*#
-*# SIDE EFFECTS: REG_VERROR may be evaluated.
-*#
-*# DESCRIPTION : Create a value by combining the vn parameters according
-*# to the fields in register R_WATCHDOG.
-*# Parameters vn are checked for validity.
-*# INTERNAL: for use by other macros in this file only.
-*#
-*#----------------------------------------------------------------------
-*# HISTORY
-*#
-*# DATE NAME CHANGES
-*# ---- ---- -------
-*# Sep 30 2002 Hans-Peter Nilsson Initial version
-*#**********************************************************************/
-
-#define REG_VAL__R_WATCHDOG_(f1_,v1,f2_,v2) ( \
- (R_WATCHDOG__key__##f1_##_VAL(R_WATCHDOG_, key_, v1) << R_WATCHDOG__key__BITNR) | \
- (R_WATCHDOG__enable__##f2_##_VAL(R_WATCHDOG_, enable_, v2) << R_WATCHDOG__enable__BITNR) \
-)
-
-#endif
-
-#endif
projects / openwrt / staging / chunkeey.git / commitdiff