bcm53xx: rename patches that were not upstreamed to 3xx
authorRafał Miłecki <zajec5@gmail.com>
Fri, 5 Dec 2014 16:13:27 +0000 (16:13 +0000)
committerRafał Miłecki <zajec5@gmail.com>
Fri, 5 Dec 2014 16:13:27 +0000 (16:13 +0000)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 43528

16 files changed:
target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-fix-early-serial-console.patch [deleted file]
target/linux/bcm53xx/patches-3.14/045-ARM-BCM5301X-select-GPIOLIB-as-optional.patch [deleted file]
target/linux/bcm53xx/patches-3.14/048-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch [deleted file]
target/linux/bcm53xx/patches-3.14/301-ARM-BCM5301X-fix-early-serial-console.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.14/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.14/303-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-fix-early-serial-console.patch [deleted file]
target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-select-GPIOLIB-as-optional.patch [deleted file]
target/linux/bcm53xx/patches-3.18/048-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch [deleted file]
target/linux/bcm53xx/patches-3.18/049-ARM-BCM53XX-set-customized-AUXCTL.patch [deleted file]
target/linux/bcm53xx/patches-3.18/131-ARM-BCM5301X-add-restart-support.patch
target/linux/bcm53xx/patches-3.18/150-pci-do-not-probe-too-early.patch
target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-fix-early-serial-console.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.18/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.18/303-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch [new file with mode: 0644]

diff --git a/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.14/044-ARM-BCM5301X-fix-early-serial-console.patch
deleted file mode 100644 (file)
index 5c6f6ec..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 14 Sep 2014 21:02:35 +0200
-Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console
-
-This device actually has a 8250 serial with a shift of 0.
-Tested this on a BCM4708.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/Kconfig.debug | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -109,7 +109,7 @@ choice
-       config DEBUG_BCM_5301X
-               bool "Kernel low-level debugging on BCM5301X UART1"
-               depends on ARCH_BCM_5301X
--              select DEBUG_UART_PL01X
-+              select DEBUG_UART_8250
-       config DEBUG_BCM_KONA_UART
-               bool "Kernel low-level debugging messages via BCM KONA UART"
-@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT
- config DEBUG_UART_8250_SHIFT
-       int "Register offset shift for the 8250 debug UART"
-       depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
--      default 0 if FOOTBRIDGE || ARCH_IOP32X
-+      default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
-       default 2
- config DEBUG_UART_8250_WORD
diff --git a/target/linux/bcm53xx/patches-3.14/045-ARM-BCM5301X-select-GPIOLIB-as-optional.patch b/target/linux/bcm53xx/patches-3.14/045-ARM-BCM5301X-select-GPIOLIB-as-optional.patch
deleted file mode 100644 (file)
index 887650e..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-From e7b1065712e769eb4de7b9d4aa222a4531c2b8fd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 20 Sep 2014 18:21:19 +0200
-Subject: [PATCH V2] ARM: BCM5301X: select GPIOLIB as optional
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All routers (or 99% of them) based on BCM5301X use GPIOs to control LEDs
-and buttons.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-V2: Don't select GPIOLIB. We may still think about making it default at
-    some point, but we dont' really require it to boot successfully.
----
- arch/arm/mach-bcm/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -35,6 +35,7 @@ config ARCH_BCM_MOBILE
- config ARCH_BCM_5301X
-       bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
-       depends on MMU
-+      select ARCH_WANT_OPTIONAL_GPIOLIB
-       select ARM_GIC
-       select CACHE_L2X0
-       select HAVE_ARM_SCU if SMP
diff --git a/target/linux/bcm53xx/patches-3.14/048-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch b/target/linux/bcm53xx/patches-3.14/048-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch
deleted file mode 100644 (file)
index 0dbb5ce..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From 5e7384adfd587ded31a107f059ebf929acc105c3 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 1 Nov 2014 12:48:45 +0100
-Subject: [PATCH] ARM: BCM5310X: activate early printk for Netgear R6250
-
-This activates early printk on the Netgear R6250 by default.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -16,7 +16,7 @@
-       model = "Netgear R6250 V1 (BCM4708)";
-       chosen {
--              bootargs = "console=ttyS0,115200";
-+              bootargs = "console=ttyS0,115200 earlyprintk";
-       };
-       memory {
diff --git a/target/linux/bcm53xx/patches-3.14/301-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.14/301-ARM-BCM5301X-fix-early-serial-console.patch
new file mode 100644 (file)
index 0000000..5c6f6ec
--- /dev/null
@@ -0,0 +1,33 @@
+From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 14 Sep 2014 21:02:35 +0200
+Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console
+
+This device actually has a 8250 serial with a shift of 0.
+Tested this on a BCM4708.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/Kconfig.debug | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -109,7 +109,7 @@ choice
+       config DEBUG_BCM_5301X
+               bool "Kernel low-level debugging on BCM5301X UART1"
+               depends on ARCH_BCM_5301X
+-              select DEBUG_UART_PL01X
++              select DEBUG_UART_8250
+       config DEBUG_BCM_KONA_UART
+               bool "Kernel low-level debugging messages via BCM KONA UART"
+@@ -1132,7 +1132,7 @@ config DEBUG_UART_VIRT
+ config DEBUG_UART_8250_SHIFT
+       int "Register offset shift for the 8250 debug UART"
+       depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+-      default 0 if FOOTBRIDGE || ARCH_IOP32X
++      default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
+       default 2
+ config DEBUG_UART_8250_WORD
diff --git a/target/linux/bcm53xx/patches-3.14/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch b/target/linux/bcm53xx/patches-3.14/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch
new file mode 100644 (file)
index 0000000..887650e
--- /dev/null
@@ -0,0 +1,29 @@
+From e7b1065712e769eb4de7b9d4aa222a4531c2b8fd Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sat, 20 Sep 2014 18:21:19 +0200
+Subject: [PATCH V2] ARM: BCM5301X: select GPIOLIB as optional
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+All routers (or 99% of them) based on BCM5301X use GPIOs to control LEDs
+and buttons.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+V2: Don't select GPIOLIB. We may still think about making it default at
+    some point, but we dont' really require it to boot successfully.
+---
+ arch/arm/mach-bcm/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/mach-bcm/Kconfig
++++ b/arch/arm/mach-bcm/Kconfig
+@@ -35,6 +35,7 @@ config ARCH_BCM_MOBILE
+ config ARCH_BCM_5301X
+       bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+       depends on MMU
++      select ARCH_WANT_OPTIONAL_GPIOLIB
+       select ARM_GIC
+       select CACHE_L2X0
+       select HAVE_ARM_SCU if SMP
diff --git a/target/linux/bcm53xx/patches-3.14/303-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch b/target/linux/bcm53xx/patches-3.14/303-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch
new file mode 100644 (file)
index 0000000..0dbb5ce
--- /dev/null
@@ -0,0 +1,23 @@
+From 5e7384adfd587ded31a107f059ebf929acc105c3 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 1 Nov 2014 12:48:45 +0100
+Subject: [PATCH] ARM: BCM5310X: activate early printk for Netgear R6250
+
+This activates early printk on the Netgear R6250 by default.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -16,7 +16,7 @@
+       model = "Netgear R6250 V1 (BCM4708)";
+       chosen {
+-              bootargs = "console=ttyS0,115200";
++              bootargs = "console=ttyS0,115200 earlyprintk";
+       };
+       memory {
diff --git a/target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.18/044-ARM-BCM5301X-fix-early-serial-console.patch
deleted file mode 100644 (file)
index 4d100da..0000000
+++ /dev/null
@@ -1,33 +0,0 @@
-From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sun, 14 Sep 2014 21:02:35 +0200
-Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console
-
-This device actually has a 8250 serial with a shift of 0.
-Tested this on a BCM4708.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/Kconfig.debug | 4 ++--
- 1 file changed, 2 insertions(+), 2 deletions(-)
-
---- a/arch/arm/Kconfig.debug
-+++ b/arch/arm/Kconfig.debug
-@@ -113,7 +113,7 @@ choice
-       config DEBUG_BCM_5301X
-               bool "Kernel low-level debugging on BCM5301X UART1"
-               depends on ARCH_BCM_5301X
--              select DEBUG_UART_PL01X
-+              select DEBUG_UART_8250
-       config DEBUG_BCM_KONA_UART
-               bool "Kernel low-level debugging messages via BCM KONA UART"
-@@ -1249,7 +1249,7 @@ config DEBUG_UART_VIRT
- config DEBUG_UART_8250_SHIFT
-       int "Register offset shift for the 8250 debug UART"
-       depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
--      default 0 if FOOTBRIDGE || ARCH_IOP32X
-+      default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
-       default 2
- config DEBUG_UART_8250_WORD
diff --git a/target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-select-GPIOLIB-as-optional.patch b/target/linux/bcm53xx/patches-3.18/045-ARM-BCM5301X-select-GPIOLIB-as-optional.patch
deleted file mode 100644 (file)
index da17347..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
-From e7b1065712e769eb4de7b9d4aa222a4531c2b8fd Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Sat, 20 Sep 2014 18:21:19 +0200
-Subject: [PATCH V2] ARM: BCM5301X: select GPIOLIB as optional
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-All routers (or 99% of them) based on BCM5301X use GPIOs to control LEDs
-and buttons.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
----
-V2: Don't select GPIOLIB. We may still think about making it default at
-    some point, but we dont' really require it to boot successfully.
----
- arch/arm/mach-bcm/Kconfig | 1 +
- 1 file changed, 1 insertion(+)
-
---- a/arch/arm/mach-bcm/Kconfig
-+++ b/arch/arm/mach-bcm/Kconfig
-@@ -119,6 +119,7 @@ config ARCH_BCM_63XX
- config ARCH_BRCMSTB
-       bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
-       depends on MMU
-+      select ARCH_WANT_OPTIONAL_GPIOLIB
-       select ARM_GIC
-       select MIGHT_HAVE_PCI
-       select HAVE_SMP
diff --git a/target/linux/bcm53xx/patches-3.18/048-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch b/target/linux/bcm53xx/patches-3.18/048-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch
deleted file mode 100644 (file)
index 0dbb5ce..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-From 5e7384adfd587ded31a107f059ebf929acc105c3 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Sat, 1 Nov 2014 12:48:45 +0100
-Subject: [PATCH] ARM: BCM5310X: activate early printk for Netgear R6250
-
-This activates early printk on the Netgear R6250 by default.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
-
---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-@@ -16,7 +16,7 @@
-       model = "Netgear R6250 V1 (BCM4708)";
-       chosen {
--              bootargs = "console=ttyS0,115200";
-+              bootargs = "console=ttyS0,115200 earlyprintk";
-       };
-       memory {
diff --git a/target/linux/bcm53xx/patches-3.18/049-ARM-BCM53XX-set-customized-AUXCTL.patch b/target/linux/bcm53xx/patches-3.18/049-ARM-BCM53XX-set-customized-AUXCTL.patch
deleted file mode 100644 (file)
index 4367b8b..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
-From 4a658590f83c1e916ab63ed7fe6f0841924247db Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Fri, 3 Oct 2014 18:37:33 +0200
-Subject: [PATCH 2/2] ARM: BCM53XX: set customized AUXCTL
-
-This activated some more features in the l310 cache.
-
-This is based on some vendor code
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- arch/arm/mach-bcm/bcm_5301x.c | 5 ++++-
- 1 file changed, 4 insertions(+), 1 deletion(-)
-
---- a/arch/arm/mach-bcm/bcm_5301x.c
-+++ b/arch/arm/mach-bcm/bcm_5301x.c
-@@ -49,7 +49,10 @@ static const char __initconst *bcm5301x_
- };
- DT_MACHINE_START(BCM5301X, "BCM5301X")
--      .l2c_aux_val    = 0,
-+      .l2c_aux_val    = L310_AUX_CTRL_CACHE_REPLACE_RR |
-+                        L310_AUX_CTRL_DATA_PREFETCH |
-+                        L310_AUX_CTRL_INSTR_PREFETCH |
-+                        L310_AUX_CTRL_EARLY_BRESP,
-       .l2c_aux_mask   = ~0,
-       .init_early     = bcm5301x_init_early,
-       .dt_compat      = bcm5301x_dt_compat,
index 5948f8727e9776e19eef97df427f4aa88831278a..a977116a534328a4c75b04962fbd73bcc6083e9f 100644 (file)
@@ -60,8 +60,8 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
  static const char __initconst *bcm5301x_dt_compat[] = {
        "brcm,bcm4708",
        NULL,
-@@ -55,5 +85,6 @@ DT_MACHINE_START(BCM5301X, "BCM5301X")
-                         L310_AUX_CTRL_EARLY_BRESP,
+@@ -52,5 +82,6 @@ DT_MACHINE_START(BCM5301X, "BCM5301X")
+       .l2c_aux_val    = 0,
        .l2c_aux_mask   = ~0,
        .init_early     = bcm5301x_init_early,
 +      .restart        = bcm5301x_restart,
index b2e56f8e4059cbc6ab4529420091dc2a3da4cb84..ffe46ec949c35d43ff37e96c57af9a4e9446f788 100644 (file)
@@ -15,7 +15,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/drivers/pci/probe.c
 +++ b/drivers/pci/probe.c
-@@ -2093,7 +2093,10 @@ struct pci_bus *pci_scan_root_bus(struct
+@@ -2097,7 +2097,10 @@ struct pci_bus *pci_scan_root_bus(struct
        if (!found)
                pci_bus_update_busn_res_end(b, max);
  
diff --git a/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-fix-early-serial-console.patch b/target/linux/bcm53xx/patches-3.18/301-ARM-BCM5301X-fix-early-serial-console.patch
new file mode 100644 (file)
index 0000000..4d100da
--- /dev/null
@@ -0,0 +1,33 @@
+From 310a267714f7565dba8934dd51cdead6adc3b630 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sun, 14 Sep 2014 21:02:35 +0200
+Subject: [PATCH 4/4] ARM: BCM5301X: fix early serial console
+
+This device actually has a 8250 serial with a shift of 0.
+Tested this on a BCM4708.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/Kconfig.debug | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+--- a/arch/arm/Kconfig.debug
++++ b/arch/arm/Kconfig.debug
+@@ -113,7 +113,7 @@ choice
+       config DEBUG_BCM_5301X
+               bool "Kernel low-level debugging on BCM5301X UART1"
+               depends on ARCH_BCM_5301X
+-              select DEBUG_UART_PL01X
++              select DEBUG_UART_8250
+       config DEBUG_BCM_KONA_UART
+               bool "Kernel low-level debugging messages via BCM KONA UART"
+@@ -1249,7 +1249,7 @@ config DEBUG_UART_VIRT
+ config DEBUG_UART_8250_SHIFT
+       int "Register offset shift for the 8250 debug UART"
+       depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+-      default 0 if FOOTBRIDGE || ARCH_IOP32X
++      default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
+       default 2
+ config DEBUG_UART_8250_WORD
diff --git a/target/linux/bcm53xx/patches-3.18/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch b/target/linux/bcm53xx/patches-3.18/302-ARM-BCM5301X-select-GPIOLIB-as-optional.patch
new file mode 100644 (file)
index 0000000..6b10c8b
--- /dev/null
@@ -0,0 +1,29 @@
+From e7b1065712e769eb4de7b9d4aa222a4531c2b8fd Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
+Date: Sat, 20 Sep 2014 18:21:19 +0200
+Subject: [PATCH V2] ARM: BCM5301X: select GPIOLIB as optional
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+All routers (or 99% of them) based on BCM5301X use GPIOs to control LEDs
+and buttons.
+
+Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
+---
+V2: Don't select GPIOLIB. We may still think about making it default at
+    some point, but we dont' really require it to boot successfully.
+---
+ arch/arm/mach-bcm/Kconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+--- a/arch/arm/mach-bcm/Kconfig
++++ b/arch/arm/mach-bcm/Kconfig
+@@ -120,6 +120,7 @@ config ARCH_BCM_63XX
+ config ARCH_BRCMSTB
+       bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
+       depends on MMU
++      select ARCH_WANT_OPTIONAL_GPIOLIB
+       select ARM_GIC
+       select MIGHT_HAVE_PCI
+       select HAVE_SMP
diff --git a/target/linux/bcm53xx/patches-3.18/303-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch b/target/linux/bcm53xx/patches-3.18/303-ARM-BCM5310X-activate-early-printk-for-Netgear-R6250.patch
new file mode 100644 (file)
index 0000000..0dbb5ce
--- /dev/null
@@ -0,0 +1,23 @@
+From 5e7384adfd587ded31a107f059ebf929acc105c3 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Sat, 1 Nov 2014 12:48:45 +0100
+Subject: [PATCH] ARM: BCM5310X: activate early printk for Netgear R6250
+
+This activates early printk on the Netgear R6250 by default.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+@@ -16,7 +16,7 @@
+       model = "Netgear R6250 V1 (BCM4708)";
+       chosen {
+-              bootargs = "console=ttyS0,115200";
++              bootargs = "console=ttyS0,115200 earlyprintk";
+       };
+       memory {
diff --git a/target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch b/target/linux/bcm53xx/patches-3.18/305-ARM-BCM53XX-set-customized-AUXCTL.patch
new file mode 100644 (file)
index 0000000..60ebbc7
--- /dev/null
@@ -0,0 +1,28 @@
+From 4a658590f83c1e916ab63ed7fe6f0841924247db Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Fri, 3 Oct 2014 18:37:33 +0200
+Subject: [PATCH 2/2] ARM: BCM53XX: set customized AUXCTL
+
+This activated some more features in the l310 cache.
+
+This is based on some vendor code
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/mach-bcm/bcm_5301x.c | 5 ++++-
+ 1 file changed, 4 insertions(+), 1 deletion(-)
+
+--- a/arch/arm/mach-bcm/bcm_5301x.c
++++ b/arch/arm/mach-bcm/bcm_5301x.c
+@@ -80,7 +80,10 @@ static const char __initconst *bcm5301x_
+ };
+ DT_MACHINE_START(BCM5301X, "BCM5301X")
+-      .l2c_aux_val    = 0,
++      .l2c_aux_val    = L310_AUX_CTRL_CACHE_REPLACE_RR |
++                        L310_AUX_CTRL_DATA_PREFETCH |
++                        L310_AUX_CTRL_INSTR_PREFETCH |
++                        L310_AUX_CTRL_EARLY_BRESP,
+       .l2c_aux_mask   = ~0,
+       .init_early     = bcm5301x_init_early,
+       .restart        = bcm5301x_restart,