ralink: build recovery images for dcs930 ip cam
authorJohn Crispin <john@openwrt.org>
Mon, 7 Oct 2013 15:02:35 +0000 (15:02 +0000)
committerJohn Crispin <john@openwrt.org>
Mon, 7 Oct 2013 15:02:35 +0000 (15:02 +0000)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38322

target/linux/ramips/dts/DCS-930.dts
target/linux/ramips/image/Makefile

index 31dab45..dd95981 100644 (file)
                };
 
                partition@50000 {
+                       label = "kernel";
+                       reg = <0x50000 0x150000>;
+               };
+
+               partition@150000 {
+                       label = "rootfs";
+                       reg = <0x150000 0x2b0000>;
+               };
+       
+               partition {
                        label = "firmware";
                        reg = <0x50000 0x3b0000>;
                };
index 963e97c..43c71a9 100644 (file)
@@ -357,7 +357,23 @@ Image/Build/Profile/DAP1350=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350,DAP-
 
 Image/Build/Profile/DAP1350WW=$(call BuildFirmware/dap1350/$(1),$(1),dap-1350WW,DAP-1350,RT3052-AP-DAP1350WW-3)
 
-Image/Build/Profile/DCS930=$(call BuildFirmware/Default4M/$(1),$(1),dcs-930,DCS-930)
+define BuildFirmware/DCS930/squashfs
+       $(call BuildFirmware/Default4M/squashfs,squashfs,$(2),$(3))
+       dd if=$(KDIR)/vmlinux-$(2).bin.lzma of=$(KDIR)/image.$(2).combined bs=1048512 count=1 conv=sync
+       cat $(KDIR)/root.squashfs >> $(KDIR)/image.$(2).combined
+        $(call MkImage,lzma,$(KDIR)/image.$(2).combined,$(KDIR)/image.$(2))
+       $(call prepare_generic_squashfs,$(KDIR)/image.$(2))
+       if [ `stat -c%s "$(KDIR)/image.$(2)"` -gt $(ralink_default_fw_size_4M) ]; then \
+               echo "Warning: $(KDIR)/image.$(2)  is too big" >&2; \
+       else \
+               dd if=$(KDIR)/image.$(2) of=$(KDIR)/dcs.tmp bs=64K count=5 conv=sync ;\
+               cat $(KDIR)/image.$(2) >> $(KDIR)/dcs.tmp ; \
+               dd if=$(KDIR)/dcs.tmp of=$(call imgname,$(1),$(2))-factory.bin bs=4M count=1 conv=sync ;\
+               $(STAGING_DIR_HOST)/bin/mkdcs932 $(call imgname,$(1),$(2))-factory.bin ; \
+       fi
+endef
+BuildFirmware/DCS930/initramfs=$(call BuildFirmware/OF/initramfs,$(1),$(2),$(3))
+Image/Build/Profile/DCS930=$(call BuildFirmware/DCS930/$(1),$(1),dcs-930,DCS-930)
 
 Image/Build/Profile/ESR-9753=$(call BuildFirmware/Default4M/$(1),$(1),esr-9753,ESR-9753)