--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "xiaomi,mir3p", "mediatek,mt7621-soc";
+ model = "Xiaomi Mi Router 3 Pro";
+
+ aliases {
+ led-boot = &led_status_yellow;
+ led-failsafe = &led_status_red;
+ led-running = &led_status_blue;
+ led-upgrade = &led_status_yellow;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x1c000000>, <0x20000000 0x04000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_status_red: status_red {
+ label = "mir3p:red:status";
+ gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_blue: status_blue {
+ label = "mir3p:blue:status";
+ gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
+ };
+
+ led_status_yellow: status_yellow {
+ label = "mir3p:yellow:status";
+ gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+ };
+
+ wan_amber {
+ label = "mir3p:amber:wan";
+ gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
+ };
+
+ lan3_amber {
+ label = "mir3p:amber:lan3";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ lan2_amber {
+ label = "mir3p:amber:lan2";
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ lan1_amber {
+ label = "mir3p:amber:lan1";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ button {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ reset {
+ label = "reset";
+ gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+ };
+
+ reg_usb_vbus: regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&xhci {
+ vbus-supply = <®_usb_vbus>;
+};
+
+&nand {
+ status = "okay";
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "Bootloader";
+ reg = <0x0 0x40000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "Config";
+ reg = <0x40000 0x40000>;
+ };
+
+ partition@80000 {
+ label = "Bdata";
+ reg = <0x80000 0x40000>;
+ read-only;
+ };
+
+ factory: partition@c0000 {
+ label = "Factory";
+ reg = <0x0c0000 0x40000>;
+ read-only;
+ };
+
+ partition@100000 {
+ label = "crash";
+ reg = <0x100000 0x40000>;
+ };
+
+ partition@140000 {
+ label = "crash_syslog";
+ reg = <0x140000 0x80000>;
+ };
+
+ partition@1c0000 {
+ label = "reserved0";
+ reg = <0x1c0000 0x40000>;
+ read-only;
+ };
+
+ /* We keep stock xiaomi firmware (kernel0) here */
+ partition@200000 {
+ label = "kernel_stock";
+ reg = <0x200000 0x400000>;
+ };
+
+ partition@600000 {
+ label = "kernel";
+ reg = <0x600000 0x400000>;
+ };
+
+ partition@a00000 {
+ label = "ubi";
+ reg = <0xa00000 0xf580000>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ compatible = "pci14c3,7615";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ compatible = "pci14c3,7615";
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+ðernet {
+ mtd-mac-address = <&factory 0xe000>;
+ mediatek,portmap = "llllw";
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "jtag", "uart2", "uart3", "wdt";
+ ralink,function = "gpio";
+ };
+ };
+};
projects / openwrt / staging / chunkeey.git / commitdiff