--- a/drivers/net/wireless/ath/ath9k/ath9k.h
+++ b/drivers/net/wireless/ath/ath9k/ath9k.h
-@@ -309,8 +309,8 @@ struct ath_rx {
+@@ -309,7 +309,6 @@ struct ath_rx {
u8 rxotherant;
u32 *rxlink;
unsigned int rxfilter;
- spinlock_t rxflushlock;
spinlock_t rxbuflock;
-+ spinlock_t pcu_lock;
struct list_head rxbuf;
struct ath_descdma rxdma;
- struct ath_buf *rx_bufptr;
+@@ -600,9 +599,9 @@ struct ath_softc {
+ struct ath_hw *sc_ah;
+ void __iomem *mem;
+ int irq;
+- spinlock_t sc_resetlock;
+ spinlock_t sc_serial_rw;
+ spinlock_t sc_pm_lock;
++ spinlock_t sc_pcu_lock;
+ struct mutex mutex;
+ struct work_struct paprd_work;
+ struct work_struct hw_check_work;
--- a/drivers/net/wireless/ath/ath9k/main.c
+++ b/drivers/net/wireless/ath/ath9k/main.c
-@@ -239,6 +239,9 @@ int ath_set_channel(struct ath_softc *sc
+@@ -228,6 +228,8 @@ int ath_set_channel(struct ath_softc *sc
+
+ ath9k_ps_wakeup(sc);
+
++ spin_lock_bh(&sc->sc_pcu_lock);
++
+ /*
+ * This is only performed if the channel settings have
+ * actually changed.
+@@ -239,6 +241,7 @@ int ath_set_channel(struct ath_softc *sc
*/
ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, false);
-+
-+ spin_lock_bh(&sc->rx.pcu_lock);
+
stopped = ath_stoprecv(sc);
/* XXX: do not flush receive queue here. We don't want
-@@ -266,6 +269,7 @@ int ath_set_channel(struct ath_softc *sc
+@@ -257,18 +260,14 @@ int ath_set_channel(struct ath_softc *sc
+ channel->center_freq, conf_is_ht40(conf),
+ fastcc);
+
+- spin_lock_bh(&sc->sc_resetlock);
+-
+ r = ath9k_hw_reset(ah, hchan, caldata, fastcc);
+ if (r) {
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to reset channel (%u MHz), "
"reset status %d\n",
channel->center_freq, r);
- spin_unlock_bh(&sc->sc_resetlock);
-+ spin_unlock_bh(&sc->rx.pcu_lock);
+- spin_unlock_bh(&sc->sc_resetlock);
goto ps_restore;
}
- spin_unlock_bh(&sc->sc_resetlock);
-@@ -274,9 +278,12 @@ int ath_set_channel(struct ath_softc *sc
+- spin_unlock_bh(&sc->sc_resetlock);
+
+ if (ath_startrecv(sc) != 0) {
ath_print(common, ATH_DBG_FATAL,
- "Unable to restart recv logic\n");
- r = -EIO;
-+ spin_unlock_bh(&sc->rx.pcu_lock);
- goto ps_restore;
+@@ -287,6 +286,8 @@ int ath_set_channel(struct ath_softc *sc
}
-+ spin_unlock_bh(&sc->rx.pcu_lock);
+ ps_restore:
++ spin_unlock_bh(&sc->sc_pcu_lock);
+
- ath_update_txpow(sc);
- ath9k_hw_set_interrupts(ah, ah->imask);
+ ath9k_ps_restore(sc);
+ return r;
+ }
+@@ -600,6 +601,8 @@ void ath9k_tasklet(unsigned long data)
+ return;
+ }
+
++ spin_lock_bh(&sc->sc_pcu_lock);
++
+ if (!ath9k_hw_check_alive(ah))
+ ieee80211_queue_work(sc->hw, &sc->hw_check_work);
-@@ -610,7 +617,7 @@ void ath9k_tasklet(unsigned long data)
+@@ -610,15 +613,12 @@ void ath9k_tasklet(unsigned long data)
rxmask = (ATH9K_INT_RX | ATH9K_INT_RXEOL | ATH9K_INT_RXORN);
if (status & rxmask) {
- spin_lock_bh(&sc->rx.rxflushlock);
-+ spin_lock_bh(&sc->rx.pcu_lock);
-
+-
/* Check for high priority Rx first */
if ((ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) &&
-@@ -618,7 +625,7 @@ void ath9k_tasklet(unsigned long data)
+ (status & ATH9K_INT_RXHP))
ath_rx_tasklet(sc, 0, true);
ath_rx_tasklet(sc, 0, false);
- spin_unlock_bh(&sc->rx.rxflushlock);
-+ spin_unlock_bh(&sc->rx.pcu_lock);
}
if (status & ATH9K_INT_TX) {
-@@ -876,6 +883,7 @@ void ath_radio_enable(struct ath_softc *
+@@ -644,6 +644,8 @@ void ath9k_tasklet(unsigned long data)
+
+ /* re-enable hardware interrupt */
+ ath9k_hw_enable_interrupts(ah);
++
++ spin_unlock_bh(&sc->sc_pcu_lock);
+ ath9k_ps_restore(sc);
+ }
+
+@@ -871,12 +873,13 @@ void ath_radio_enable(struct ath_softc *
+ int r;
+
+ ath9k_ps_wakeup(sc);
++ spin_lock_bh(&sc->sc_pcu_lock);
++
+ ath9k_hw_configpcipowersave(ah, 0, 0);
+
if (!ah->curchan)
ah->curchan = ath_get_curchannel(sc, sc->hw);
-+ spin_lock_bh(&sc->rx.pcu_lock);
- spin_lock_bh(&sc->sc_resetlock);
+- spin_lock_bh(&sc->sc_resetlock);
r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
if (r) {
-@@ -890,8 +898,10 @@ void ath_radio_enable(struct ath_softc *
+ ath_print(common, ATH_DBG_FATAL,
+@@ -884,15 +887,14 @@ void ath_radio_enable(struct ath_softc *
+ "reset status %d\n",
+ channel->center_freq, r);
+ }
+- spin_unlock_bh(&sc->sc_resetlock);
+
+ ath_update_txpow(sc);
if (ath_startrecv(sc) != 0) {
ath_print(common, ATH_DBG_FATAL,
"Unable to restart recv logic\n");
-+ spin_unlock_bh(&sc->rx.pcu_lock);
++ spin_unlock_bh(&sc->sc_pcu_lock);
return;
}
-+ spin_unlock_bh(&sc->rx.pcu_lock);
-
+-
if (sc->sc_flags & SC_OP_BEACONS)
ath_beacon_config(sc, NULL); /* restart beacons */
-@@ -930,6 +940,9 @@ void ath_radio_disable(struct ath_softc
+
+@@ -905,6 +907,8 @@ void ath_radio_enable(struct ath_softc *
+ ath9k_hw_set_gpio(ah, ah->led_pin, 0);
+
+ ieee80211_wake_queues(hw);
++ spin_unlock_bh(&sc->sc_pcu_lock);
++
+ ath9k_ps_restore(sc);
+ }
+
+@@ -915,6 +919,8 @@ void ath_radio_disable(struct ath_softc
+ int r;
+
+ ath9k_ps_wakeup(sc);
++ spin_lock_bh(&sc->sc_pcu_lock);
++
+ ieee80211_stop_queues(hw);
+
+ /*
+@@ -930,13 +936,13 @@ void ath_radio_disable(struct ath_softc
ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, false); /* clear pending tx frames */
-+
-+ spin_lock_bh(&sc->rx.pcu_lock);
+
ath_stoprecv(sc); /* turn off frame recv */
ath_flushrecv(sc); /* flush recv queue */
-@@ -947,6 +960,9 @@ void ath_radio_disable(struct ath_softc
- spin_unlock_bh(&sc->sc_resetlock);
+ if (!ah->curchan)
+ ah->curchan = ath_get_curchannel(sc, hw);
+
+- spin_lock_bh(&sc->sc_resetlock);
+ r = ath9k_hw_reset(ah, ah->curchan, ah->caldata, false);
+ if (r) {
+ ath_print(ath9k_hw_common(sc->sc_ah), ATH_DBG_FATAL,
+@@ -944,11 +950,14 @@ void ath_radio_disable(struct ath_softc
+ "reset status %d\n",
+ channel->center_freq, r);
+ }
+- spin_unlock_bh(&sc->sc_resetlock);
ath9k_hw_phy_disable(ah);
-+
-+ spin_unlock_bh(&sc->rx.pcu_lock);
+
ath9k_hw_configpcipowersave(ah, 1, 1);
++
++ spin_unlock_bh(&sc->sc_pcu_lock);
ath9k_ps_restore(sc);
++
ath9k_setpower(sc, ATH9K_PM_FULL_SLEEP);
-@@ -966,6 +982,9 @@ int ath_reset(struct ath_softc *sc, bool
+ }
+
+@@ -962,19 +971,20 @@ int ath_reset(struct ath_softc *sc, bool
+ /* Stop ANI */
+ del_timer_sync(&common->ani.timer);
+
++ spin_lock_bh(&sc->sc_pcu_lock);
++
+ ieee80211_stop_queues(hw);
ath9k_hw_disable_interrupts(ah);
ath_drain_all_txq(sc, retry_tx);
-+
-+ spin_lock_bh(&sc->rx.pcu_lock);
+
ath_stoprecv(sc);
ath_flushrecv(sc);
-@@ -980,6 +999,8 @@ int ath_reset(struct ath_softc *sc, bool
+- spin_lock_bh(&sc->sc_resetlock);
+ r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
+ if (r)
ath_print(common, ATH_DBG_FATAL,
- "Unable to start recv logic\n");
+ "Unable to reset hardware; reset status %d\n", r);
+- spin_unlock_bh(&sc->sc_resetlock);
-+ spin_unlock_bh(&sc->rx.pcu_lock);
-+
- /*
- * We may be doing a reset in response to a request
- * that changes the channel so update any state that
-@@ -1142,6 +1163,7 @@ static int ath9k_start(struct ieee80211_
+ if (ath_startrecv(sc) != 0)
+ ath_print(common, ATH_DBG_FATAL,
+@@ -1004,6 +1014,7 @@ int ath_reset(struct ath_softc *sc, bool
+ }
+
+ ieee80211_wake_queues(hw);
++ spin_unlock_bh(&sc->sc_pcu_lock);
+
+ /* Start ANI */
+ ath_start_ani(common);
+@@ -1142,17 +1153,16 @@ static int ath9k_start(struct ieee80211_
* be followed by initialization of the appropriate bits
* and then setup of the interrupt mask.
*/
-+ spin_lock_bh(&sc->rx.pcu_lock);
- spin_lock_bh(&sc->sc_resetlock);
+- spin_lock_bh(&sc->sc_resetlock);
++ spin_lock_bh(&sc->sc_pcu_lock);
r = ath9k_hw_reset(ah, init_channel, ah->caldata, false);
if (r) {
-@@ -1150,6 +1172,7 @@ static int ath9k_start(struct ieee80211_
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to reset hardware; reset status %d "
"(freq %u MHz)\n", r,
curchan->center_freq);
- spin_unlock_bh(&sc->sc_resetlock);
-+ spin_unlock_bh(&sc->rx.pcu_lock);
+- spin_unlock_bh(&sc->sc_resetlock);
++ spin_unlock_bh(&sc->sc_pcu_lock);
goto mutex_unlock;
}
- spin_unlock_bh(&sc->sc_resetlock);
-@@ -1171,8 +1194,10 @@ static int ath9k_start(struct ieee80211_
+- spin_unlock_bh(&sc->sc_resetlock);
+
+ /*
+ * This is needed only to setup initial state
+@@ -1171,8 +1181,10 @@ static int ath9k_start(struct ieee80211_
ath_print(common, ATH_DBG_FATAL,
"Unable to start recv logic\n");
r = -EIO;
-+ spin_unlock_bh(&sc->rx.pcu_lock);
++ spin_unlock_bh(&sc->sc_pcu_lock);
goto mutex_unlock;
}
-+ spin_unlock_bh(&sc->rx.pcu_lock);
++ spin_unlock_bh(&sc->sc_pcu_lock);
/* Setup our intr mask. */
ah->imask = ATH9K_INT_TX | ATH9K_INT_RXEOL |
-@@ -1371,12 +1396,14 @@ static void ath9k_stop(struct ieee80211_
+@@ -1367,6 +1379,8 @@ static void ath9k_stop(struct ieee80211_
+ ath9k_btcoex_timer_pause(sc);
+ }
+
++ spin_lock_bh(&sc->sc_pcu_lock);
++
+ /* make sure h/w will not generate any interrupt
* before setting the invalid flag. */
ath9k_hw_disable_interrupts(ah);
-
-+ spin_lock_bh(&sc->rx.pcu_lock);
- if (!(sc->sc_flags & SC_OP_INVALID)) {
- ath_drain_all_txq(sc, false);
- ath_stoprecv(sc);
- ath9k_hw_phy_disable(ah);
- } else
- sc->rx.rxlink = NULL;
-+ spin_unlock_bh(&sc->rx.pcu_lock);
-
+@@ -1381,6 +1395,9 @@ static void ath9k_stop(struct ieee80211_
/* disable HAL and put h/w to sleep */
ath9k_hw_disable(ah);
+ ath9k_hw_configpcipowersave(ah, 1, 1);
++
++ spin_unlock_bh(&sc->sc_pcu_lock);
++
+ ath9k_ps_restore(sc);
+
+ /* Finally, put the chip in FULL SLEEP mode */
--- a/drivers/net/wireless/ath/ath9k/recv.c
+++ b/drivers/net/wireless/ath/ath9k/recv.c
@@ -297,19 +297,17 @@ static void ath_edma_start_recv(struct a
}
int ath_rx_init(struct ath_softc *sc, int nbufs)
-@@ -319,8 +317,8 @@ int ath_rx_init(struct ath_softc *sc, in
+@@ -319,7 +317,7 @@ int ath_rx_init(struct ath_softc *sc, in
struct ath_buf *bf;
int error = 0;
- spin_lock_init(&sc->rx.rxflushlock);
++ spin_lock_init(&sc->sc_pcu_lock);
sc->sc_flags &= ~SC_OP_RXFLUSH;
-+ spin_lock_init(&sc->rx.pcu_lock);
spin_lock_init(&sc->rx.rxbuflock);
- if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) {
@@ -506,9 +504,9 @@ int ath_startrecv(struct ath_softc *sc)
ath9k_hw_rxena(ah);
}
static bool ath_beacon_dtim_pending_cab(struct sk_buff *skb)
+--- a/drivers/net/wireless/ath/ath9k/init.c
++++ b/drivers/net/wireless/ath/ath9k/init.c
+@@ -588,7 +588,6 @@ static int ath9k_init_softc(u16 devid, s
+ spin_lock_init(&common->cc_lock);
+
+ spin_lock_init(&sc->wiphy_lock);
+- spin_lock_init(&sc->sc_resetlock);
+ spin_lock_init(&sc->sc_serial_rw);
+ spin_lock_init(&sc->sc_pm_lock);
+ mutex_init(&sc->mutex);
+--- a/drivers/net/wireless/ath/ath9k/xmit.c
++++ b/drivers/net/wireless/ath/ath9k/xmit.c
+@@ -1142,13 +1142,11 @@ void ath_drain_all_txq(struct ath_softc
+ ath_print(common, ATH_DBG_FATAL,
+ "Failed to stop TX DMA. Resetting hardware!\n");
+
+- spin_lock_bh(&sc->sc_resetlock);
+ r = ath9k_hw_reset(ah, sc->sc_ah->curchan, ah->caldata, false);
+ if (r)
+ ath_print(common, ATH_DBG_FATAL,
+ "Unable to reset hardware; reset status %d\n",
+ r);
+- spin_unlock_bh(&sc->sc_resetlock);
+ }
+
+ for (i = 0; i < ATH9K_NUM_TX_QUEUES; i++) {
projects / openwrt / staging / chunkeey.git / commitdiff