apm821xx: switch MX60(W)'s recovery images to multi-image method

In the past, the MX60(W)'s recovery images always had problems
with the size restriction and never really worked without manual
intervention. This patch reworks the initramfs, which allows the
device to ease up on the impossible tight kernel size requirements
for the initramfs image.

This new initramfs can be loaded through the MX60(W) U-boot
in the following way:

=> setenv bootargs console=ttyS0,$baudrate
=> tftpboot $meraki_loadaddr meraki_mx60-initramfs-kernel.bin
   [...]
   Load address: 0x800000
    Loading: ################################################ [...]
    done
   [...]

=> bootm $fileaddr
   \## Booting kernel from Legacy Image at 00800000 ...
    ...

For more information and the latest flashing guide:
please visit the OpenWrt Wiki Page for the MX60(W):
<https://openwrt.org/toh/meraki/mx60#flashing>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>

diff --git a/target/linux/apm821xx/image/Makefile b/target/linux/apm821xx/image/Makefile
index b150ab8af5b8978ba887c6f32f25eae334f6ae87..4097e772ec0e4e3ea51fbaca4cf6c04734976762 100644 (file)
--- a/target/linux/apm821xx/image/Makefile
+++ b/target/linux/apm821xx/image/Makefile
@@ -101,13 +101,10 @@ define Device/mx60
   # otherwise the final image will fail to boot. This is set within the
   # MX60 kernel header definition which is found at
   # ./tools/firmware-utils/src/mkmerakifw.c, line 103~
-  KERNEL_SIZE := 2984k
+  KERNEL_SIZE := 4031k
   IMAGE_SIZE := 1021m
   KERNEL := kernel-bin | gzip | uImage gzip | MerakiAdd-dtb | MerakiNAND
-  KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux | gzip | uImage gzip | \
-                     check-size $$(KERNEL_SIZE) | \
-                     MerakiAdd-dtb | pad-to 2047k | MerakiAdd-initramfs | \
-                     MerakiNAND
+  KERNEL_INITRAMFS := kernel-bin | gzip | dtb | wndr4700-specialImage gzip
   IMAGE/sysupgrade.tar := sysupgrade-tar
   UBINIZE_OPTS := -E 5
 endef