odhcp6c: various fixes
[openwrt/staging/chunkeey.git] / target / linux / ramips /
2013-10-13 Hauke Mehrtenskernel: update kernel to 3.10.15
2013-10-09 John Crispinralink: fixes mpr a1/a2 network setup
2013-10-08 John Crispinralink: add support for the mt7530 eval board
2013-10-08 John Crispinralink: add missing header file to mt7530 driver
2013-10-07 John Crispinralink: fix asiarf image generation
2013-10-07 John Crispinralink: split mt7530 driver out of the gsw driver
2013-10-07 John Crispinralink: build recovery images for dcs930 ip cam
2013-10-07 John Crispinralink: DIR610A1 Fix remaining issues
2013-10-07 John Crispinralink: MT7620 eval board pinmux fixes
2013-10-07 John Crispinralink: make cevt systick selectable via kconfig
2013-10-07 John Crispinralink: fix mt7620a pinmux
2013-09-30 John Crispinralink: dts fixes
2013-09-30 John Crispinralink: fix DIR-320-B1 board detection
2013-09-30 John Crispinralink: Change size of image for DIR-320 B1 to 8MB
2013-09-27 Gabor Juhoskernel: update 3.10 to 3.10.13
2013-09-26 Felix Fietkaubuild: unify mips target cflags
2013-09-25 Gabor Juhoskernel/3.10: refresh all target patches
2013-09-25 Gabor Juhosramips: sync 3.10 configs
2013-09-19 John Crispinralink: make dcs930 uvc camera work
2013-09-19 John Crispinralink: add support for dalink dcs930l ipcam
2013-09-19 John Crispinralink: add back dwc_otg driver
2013-09-18 John Crispinralink: DIR-300 B7 and DIR-320/NRU B1 on Ralink RT5350
2013-09-17 John Crispinralink: add pinctrl driver
2013-09-17 John Crispinralink: change subtarget order
2013-09-15 Gabor Juhoskernel/3.10: add new Kconfig option for firmware partit...
2013-09-15 Gabor Juhoskernel: update 3.10 to 3.10.12
2013-09-02 Gabor Juhoskernel: update 3.10 to 3.10.10
2013-08-23 Gabor Juhoskernel: update 3.10 to 3.10.9
2013-08-23 Gabor Juhosramips: remove lantiq specific patches
2013-08-23 Gabor Juhosramips: use correct image size parameter for DIR-610 A1
2013-08-23 Gabor Juhosramips: use correct parameters in the Seama template
2013-08-23 Gabor Juhosramips: update the RT3883 PCI patch
2013-08-14 John Crispinramips: DIR-610-A1 Support
2013-08-14 John Crispinramips: fix typo in network uci_defaults script
2013-08-14 John Crispinramips: dts file cleanup
2013-08-14 John Crispinramips: add support for dir810l and asus rp-n53
2013-08-14 John Crispinramips: various updates to the mt7620 dtsi file
2013-08-14 John Crispinramips: update v3.10 patches
2013-08-05 Gabor Juhosramips: re-implement PCI mux
2013-08-05 Gabor Juhosramips: allow to build Seama firmware images with arbit...
2013-08-01 John Crispinramips: add Poray IP2202 support
2013-08-01 John Crispinramips: add Poray X8 support
2013-08-01 John Crispinramips: add Poray X5/X6 Support
2013-08-01 John Crispinramips: add Poray M4 4M/8M support
2013-08-01 John Crispinramips: add Poray M3 support
2013-08-01 John Crispinramips: add basics for Poray devices
2013-08-01 John Crispinralink: add mt7620a_mt7610e profile
2013-07-30 Felix Fietkaukernel: update remaning platforms accidentally left...
2013-07-29 John Crispinramips: fix indenting of spi partitions inside dts...
2013-07-29 Felix Fietkaubuild: unify target independent optimization options
2013-07-27 John Crispinramips: add MPR-A1 support
2013-07-27 John Crispinralink: gpio driver should not set gpio to input when...
2013-07-27 John Crispinramips: add back dwc_otg driver
2013-07-27 John Crispinramips: MPR-A2 should use memory auto detection
2013-07-27 John Crispinramips: enable usb phy support on rt5350
2013-07-27 John Crispinralink: switch back to dwc_otg ... dwc2 seems to not...
2013-07-26 John Crispinramips: unbreak asiarf dts files
2013-07-26 Gabor Juhoskernel: update 3.10 to 3.10.3
2013-07-25 John Crispinramips: disable hg255d
2013-07-25 John Crispinramipe: disable HG255D support
2013-07-25 John Crispinramips: important patch for HG255D
2013-07-24 John Crispinramips: Basic support for the AsiaRF RT5350 based AWM00...
2013-07-23 John Crispinramips: fix HG255D VLAN initial detect issue
2013-07-22 John Crispinramips: Add support for Huawei HG255D in trunk
2013-07-22 Gabor Juhoskernel: update 3.10 to 3.10.2
2013-07-22 John Crispinralink: set remove dwc_otg from default packages and...
2013-07-22 John Crispinralink: remove dwc_otg from modules.mk
2013-07-22 John Crispinralink: set v3.10 as default
2013-07-19 Jonas Gorskikernel: move CONFIG_NET_IP_TUNNEL to generic
2013-07-17 John Crispinramips: add sysupgarde support for wl-330n3g
2013-07-15 John Crispinramips: make the old dwc driver depend on v3.9
2013-07-15 John Crispinramips: add v3.10 kernel config files
2013-07-15 John Crispinramips: fix ehci/ohci OF binding
2013-07-15 John Crispinramips: update dtsi files to work with dwc2 driver
2013-07-15 John Crispinramips: add a explicit reset to dwc2
2013-07-15 John Crispinramips: add a patch to make dwc2 work with boards that...
2013-07-15 John Crispinramips: add ralink v3.10 support
2013-07-14 John Crispinramips: disable ill_acc driver by default
2013-07-14 John Crispinralink: drop v3.8 support
2013-07-13 Hauke Mehrtenskernel: update to kernel 3.9.10 and refresh patches
2013-07-08 John Crispinralink: vlan offloading is causing problems. disable it
2013-07-08 John Crispinralink: unbreak ralink i2c support
2013-07-08 John Crispinralink: add i2c-ralink kmod info
2013-07-04 John Crispinramips: fix RT-N13U gpio buttons
2013-06-30 Felix Fietkauramips: update wlan firmware hotplug script for new...
2013-06-30 Jonas Gorskikernel: update linux 3.9 to 3.9.8
2013-06-29 John Crispinramips: unbreak initramfs generation
2013-06-28 John Crispinramips: fix ethernet driver
2013-06-27 Florian Fainellitargets: prepare for supporting normal and initramfs...
2013-06-27 John Crispinramips: fix rt2x00 ethernet compile bug
2013-06-27 John Crispinramips: add missing symbols to rt288x config
2013-06-27 John Crispinramips: fix ethernet stability issue introduced by...
2013-06-24 John Crispinramips: move ESW reset to preinit on RT305x/RT5350
2013-06-24 John Crispinramips: make rt3883 usb work properly
2013-06-24 John Crispinramips: revert gpio regulator dts update
2013-06-23 John Crispinralink: update patches
2013-06-21 John Crispinbase-files: input/button drivers get loaded before...
2013-06-21 John Crispinbase-files: diag does not need to insmod any drivers...
2013-06-10 John Crispinramips: add HAME MPR-A2 support
2013-06-10 John Crispinramips: add support for belkin F7C027 wemo/homeautomati...
next