openwrt/staging/chunkeey.git
4 years agoRevert "musl: fix termios struct c_ispeed/c_ospeed field names" (accidental commit)
Felix Fietkau [Sun, 13 Sep 2015 17:39:24 +0000 (17:39 +0000)]
Revert "musl: fix termios struct c_ispeed/c_ospeed field names" (accidental commit)

SVN-Revision: 46898

4 years agogcc: fix path to powerpc musl dynamic linker with 5.2 (#20501)
Felix Fietkau [Sun, 13 Sep 2015 17:38:55 +0000 (17:38 +0000)]
gcc: fix path to powerpc musl dynamic linker with 5.2 (#20501)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46897

4 years agomusl: fix termios struct c_ispeed/c_ospeed field names
Felix Fietkau [Sun, 13 Sep 2015 17:38:49 +0000 (17:38 +0000)]
musl: fix termios struct c_ispeed/c_ospeed field names

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46896

4 years agoath10k: make title for the old firmware config option more meaningful
Felix Fietkau [Sun, 13 Sep 2015 17:38:42 +0000 (17:38 +0000)]
ath10k: make title for the old firmware config option more meaningful

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46895

4 years agopackages: uboot-sunxi: fix mmc transfer timeout for slow sdcards.
Zoltan Herpai [Sun, 13 Sep 2015 15:11:27 +0000 (15:11 +0000)]
packages: uboot-sunxi: fix mmc transfer timeout for slow sdcards.

This should fix a issue reported in ticket #20387.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46894

4 years agoar71xx: fix build of lzma-loader with binutils 2.25.1
Hauke Mehrtens [Sat, 12 Sep 2015 18:57:37 +0000 (18:57 +0000)]
ar71xx: fix build of lzma-loader with binutils 2.25.1

To make the lzma-loader build with binutils 2.25.1 it is needed to
remove the .MIPS.abiflags section otherwise I get the following compile
error:

mips-openwrt-linux-musl-objcopy -O binary -R .reginfo -R .note -R .comment -R .mdebug -S loader loader.bin
mips-openwrt-linux-musl-objcopy: Warning: Writing section `.text' to huge (ie negative) file offset 0xffffffff80a00000.
mips-openwrt-linux-musl-objcopy:loader.bin[.text]: File truncated

This should close #20487.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46893

4 years agobcm53xx: add NAND flash chip description for Asus RT-AC87U
Hauke Mehrtens [Sat, 12 Sep 2015 11:10:34 +0000 (11:10 +0000)]
bcm53xx: add NAND flash chip description for Asus RT-AC87U

This should fix #20492.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46892

4 years agoramips: enable external amplifier for Xiaomi MiWiFi Mini
Felix Fietkau [Sat, 12 Sep 2015 10:22:41 +0000 (10:22 +0000)]
ramips: enable external amplifier for Xiaomi MiWiFi Mini

Attempt to boost the 2.4 GHz signal, currently very low.

Signed-off-by: D. Andrei Măceș <dmaces@nd.edu>
SVN-Revision: 46891

4 years agobase-files: fix typo in core dump pattern sysctl entry (fixes #20489)
Felix Fietkau [Sat, 12 Sep 2015 08:57:59 +0000 (08:57 +0000)]
base-files: fix typo in core dump pattern sysctl entry (fixes #20489)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46890

4 years agobcm53xx: reorder some arch patches
Rafał Miłecki [Fri, 11 Sep 2015 22:36:05 +0000 (22:36 +0000)]
bcm53xx: reorder some arch patches

This moves arch patches affecting many DTS files. Thanks to this change
we can put some ready-to-mainline patches at 300-319 and simplify
backporting process.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46889

4 years agowpan-tools: bump to wpan-tools-0.5
Hauke Mehrtens [Fri, 11 Sep 2015 20:52:35 +0000 (20:52 +0000)]
wpan-tools: bump to wpan-tools-0.5

Signed-off-by: Varka Bhadram <varkabhadram@gmail.com>
SVN-Revision: 46888

4 years agomac80211: use wl18xx-fw-4.bin
Hauke Mehrtens [Fri, 11 Sep 2015 20:37:47 +0000 (20:37 +0000)]
mac80211: use wl18xx-fw-4.bin

The driver only supports wl18xx-fw-4.bin and does not support the old
firmware wl18xx-fw-3.bin and more.

The wl18xx-conf.bin file was removed upstream it does not fit all
devices any more, see this on how to generate one:
http://processors.wiki.ti.com/index.php/Open_Source_Wireless_Connectivity_wlconf

If someone has a config file for the common platforms with the wifi nic
OpenWrt uses please send a patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46887

4 years agomac80211: add iwlagn debug options
Hauke Mehrtens [Fri, 11 Sep 2015 20:37:23 +0000 (20:37 +0000)]
mac80211: add iwlagn debug options

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46886

4 years agomac80211: refresh Intel firmware
Hauke Mehrtens [Fri, 11 Sep 2015 20:36:35 +0000 (20:36 +0000)]
mac80211: refresh Intel firmware

- sort firmware
- add newer firmware for Intel chipsets
- newer Intel MVM require firmware

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46885

4 years agomac80211: iwlagn: enable iwlmvm
Hauke Mehrtens [Fri, 11 Sep 2015 20:36:11 +0000 (20:36 +0000)]
mac80211: iwlagn: enable iwlmvm

- reported in forums
- Intel 7260 and 3160 need IWLMVM drivers/firmware

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46884

4 years agomac80211: update linux-firmware to 2014-09-03
Hauke Mehrtens [Fri, 11 Sep 2015 20:35:11 +0000 (20:35 +0000)]
mac80211: update linux-firmware to 2014-09-03

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
[update to 2014-09-03 and change to xz]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46883

4 years agomac80211: rt2800-usb: enable "unknown" USB IDs
Hauke Mehrtens [Fri, 11 Sep 2015 20:31:58 +0000 (20:31 +0000)]
mac80211: rt2800-usb: enable "unknown" USB IDs

- should fix issue: https://forum.openwrt.org/viewtopic.php?id=57315
- enable support of more USB stick with rt28xx chipsets
- experimental: USB-IDs not in vendor linux driver
- experimental: "exact chipset is unknown"
- experimental: "enabling these devices may or may not work"

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46882

4 years agokernel: add CONFIG_MIPS_CDMM config option
Hauke Mehrtens [Fri, 11 Sep 2015 20:31:32 +0000 (20:31 +0000)]
kernel: add CONFIG_MIPS_CDMM config option

This driver was added in kernel 4.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46881

4 years agobrcm47xx: detect Netgear R6300 V1 & support reset button
Rafał Miłecki [Fri, 11 Sep 2015 20:00:02 +0000 (20:00 +0000)]
brcm47xx: detect Netgear R6300 V1 & support reset button

It's still far from complete support.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46880

4 years agokernel: Added missing symbols into 4.1 & 4.0 kernel default .config
Hauke Mehrtens [Fri, 11 Sep 2015 19:02:53 +0000 (19:02 +0000)]
kernel: Added missing symbols into 4.1 & 4.0 kernel default .config

As requested here #20432 I've
tried to fix the missing symbols from the specified default kernel
config files.
I ran into this problem trying to build an image for x86_64 target
with a custom kernel configuration.

Signed-off-by: Manganini Mirko <mmanganini@gmail.com>
SVN-Revision: 46879

4 years agobrcm47xx: update to kernel 4.1
Hauke Mehrtens [Fri, 11 Sep 2015 18:52:42 +0000 (18:52 +0000)]
brcm47xx: update to kernel 4.1

This makes bcm53xx use kernel 4.1 by default now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46878

4 years agobcm53xx: update to kernel 4.1
Hauke Mehrtens [Fri, 11 Sep 2015 18:52:18 +0000 (18:52 +0000)]
bcm53xx: update to kernel 4.1

This makes bcm53xx use kernel 4.1 by default now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46877

4 years agotools: add tar host build, required for --sort=name which was only added in the lates...
Felix Fietkau [Fri, 11 Sep 2015 18:38:02 +0000 (18:38 +0000)]
tools: add tar host build, required for --sort=name which was only added in the latest version

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46876

4 years agoscript: downlaod: change mirror for kernel.org
Hauke Mehrtens [Fri, 11 Sep 2015 17:59:12 +0000 (17:59 +0000)]
script: downlaod: change mirror for kernel.org

kernel.org now suggests a different mirror address. this one also
support IPv6 connections and was faster for me.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46875

4 years agobinutils: add binutils 2.25.1
Hauke Mehrtens [Fri, 11 Sep 2015 17:58:39 +0000 (17:58 +0000)]
binutils: add binutils 2.25.1

This adds binutils 2.25.1 as an option to OpenWrt.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46874

4 years agogcc: update gcc 5.x musl patches
Hauke Mehrtens [Fri, 11 Sep 2015 17:57:39 +0000 (17:57 +0000)]
gcc: update gcc 5.x musl patches

This replaces the musl patches for gcc with the versions which are in
gcc trunk.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46873

4 years agobrcm47xx: increase max image size
Hauke Mehrtens [Fri, 11 Sep 2015 17:55:28 +0000 (17:55 +0000)]
brcm47xx: increase max image size

the trx utile uses a maximum image size of 7.2MB. There are brcm47xx
devices even with serial flash with bigger flash chips, but OpenWrt was
not able to create images for these devices. This patch provides an
additional parameter which increases this limit to 32 MB. There is a
warning in the trx utile code which suggests that bigger images could
overwrite the nvram partition on some devices, but normally the program
writing the image should make sure that it is safe to write it to the
flash.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46872

4 years agobrcm47xx: break long lines in image Makefile
Hauke Mehrtens [Fri, 11 Sep 2015 17:54:55 +0000 (17:54 +0000)]
brcm47xx: break long lines in image Makefile

This patch changes nothing on the behaviour, it just breaks long lines
with bin/trx to make it easier to add additional parameters.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46871

4 years agobrcm2708: remove linux 3.18 support
Felix Fietkau [Fri, 11 Sep 2015 17:17:30 +0000 (17:17 +0000)]
brcm2708: remove linux 3.18 support

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46870

4 years agolantiq: Use the BAR0 base address in the ath PCI fixup code
Felix Fietkau [Fri, 11 Sep 2015 16:35:46 +0000 (16:35 +0000)]
lantiq: Use the BAR0 base address in the ath PCI fixup code

Fixes support for AR9287 on TP-Link TD-W8980 and possibly other devices
which have an ath wifi chip at a PCI address other than 0xb8000000
(TD-W8980 for example has it's wifi chip at 0xbc000000).

Signed-off-by: Geoffrey McRae <geoff@spacevs.com>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
SVN-Revision: 46869

4 years agougps: fix filename to eliminate build problems
Felix Fietkau [Fri, 11 Sep 2015 16:35:32 +0000 (16:35 +0000)]
ugps: fix filename to eliminate build problems

due to ordering PKG_SOURCE_VERSION is not defined leading
to a filename "ugps-.tar.bz2"
This errors out when an older version is in the dl/ dir (or LOCALMIRROR)

fix order and use uhttpd file naming scheme to visibly include date

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46868

4 years agobase-files: set kernel.core_pattern in sysctl.conf
Felix Fietkau [Fri, 11 Sep 2015 16:35:17 +0000 (16:35 +0000)]
base-files: set kernel.core_pattern in sysctl.conf

Move the pattern setting from netifd's service script to
/etc/sysctl.conf.  Put the timestamp component '%t' just after
executable name '%e' for more natural order from output of ls command.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46867

4 years agoutil-linux: add prlimit command.
Felix Fietkau [Fri, 11 Sep 2015 16:35:02 +0000 (16:35 +0000)]
util-linux: add prlimit command.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
SVN-Revision: 46866

4 years agomvsw61xx: match swconfig function names
Felix Fietkau [Fri, 11 Sep 2015 16:34:49 +0000 (16:34 +0000)]
mvsw61xx: match swconfig function names

Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 46865

4 years agomvsw61xx: use standard swconfig get_port_link
Felix Fietkau [Fri, 11 Sep 2015 16:34:35 +0000 (16:34 +0000)]
mvsw61xx: use standard swconfig get_port_link

The previous "link" and "status" functions were non-standard,
and thus less useful for parsing.

Signed-off-by: Claudio Leite <leitec@staticky.com>
SVN-Revision: 46864

4 years agoipkg-build: add ogargs to outer tar/ipk
Felix Fietkau [Fri, 11 Sep 2015 16:34:22 +0000 (16:34 +0000)]
ipkg-build: add ogargs to outer tar/ipk

prevent name:uid leaks of build system

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46863

4 years agoar71xx: Restore buildability of the AP121 target
Felix Fietkau [Fri, 11 Sep 2015 16:34:08 +0000 (16:34 +0000)]
ar71xx: Restore buildability of the AP121 target

Increase space for kernel and also introduce a 8M flash target into the
Makefile.

Signed-off-by: Attila Lendvai <attila@lendvai.name>
SVN-Revision: 46862

4 years agohostapd: Add eapol_version config option
Felix Fietkau [Fri, 11 Sep 2015 16:33:54 +0000 (16:33 +0000)]
hostapd: Add eapol_version config option

Add eapol_version to the openwrt wireless config ssid section.
Only eapol_version=1 and 2 will get passed to hostapd, the default
in hostapd is 2.

This is only useful for really old client devices that don't
accept eapol_version=2.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 46861

4 years agoopenvpn: remove __DATE__ from options output
Felix Fietkau [Fri, 11 Sep 2015 16:33:39 +0000 (16:33 +0000)]
openvpn: remove __DATE__ from options output

reported by:
https://reproducible.debian.net/openwrt/dbd/ar71xx/base/openvpn-nossl_2.3.7-1_ar71xx.ipk.html

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46860

4 years agoinclude/image.mk: make tar reproducible
Felix Fietkau [Fri, 11 Sep 2015 16:33:26 +0000 (16:33 +0000)]
include/image.mk: make tar reproducible

several packages reported different file order between builds
make binutils, kmod-sched reproducible

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46859

4 years agoyaffs2: remove __TIME__ __DATE__ macros
Felix Fietkau [Fri, 11 Sep 2015 16:33:12 +0000 (16:33 +0000)]
yaffs2: remove __TIME__ __DATE__ macros

prevent compiler errors with gcc 4.9
increase reproducibility

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46858

4 years agoramips: Enable RTC support for PBR-M1
Felix Fietkau [Fri, 11 Sep 2015 16:32:58 +0000 (16:32 +0000)]
ramips: Enable RTC support for PBR-M1

The PBR-M1 and other upcoming MT7621 boards have RTC chips on them. The
PBR-M1 also selects the kmod-rtc-pcf8563 by default. But the module itself
will not be build because CONFIG_RTC_CLASS is currently not enabled for its
kernel.

Enabling this option should fix the problem of the missing rtc device on
these boards.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46857

4 years agoar71xx: fix ar724x clock calculation
Felix Fietkau [Fri, 11 Sep 2015 16:32:45 +0000 (16:32 +0000)]
ar71xx: fix ar724x clock calculation

According to the AR7242 datasheet section 2.8, AR724X CPUs use a 40MHz
input clock as the REF_CLK instead of 5MHz.

The correct CPU PLL calculation procedure is as follows:
CPU_PLL = (DIV * REF_CLK) / REF_DIV / 2.

This patch is compatible with the current calculation procedure with default
DIV and REF_DIV values.

Test on both AR7240, AR7241 and AR7242.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
SVN-Revision: 46856

4 years agobrcm2708-gpu-fw: update to latest version
Felix Fietkau [Fri, 11 Sep 2015 16:32:28 +0000 (16:32 +0000)]
brcm2708-gpu-fw: update to latest version

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46855

4 years agobrcm2708: add kmod-sound-soc-raspidac3
Felix Fietkau [Fri, 11 Sep 2015 16:32:15 +0000 (16:32 +0000)]
brcm2708: add kmod-sound-soc-raspidac3

This adds support for RaspiDAC Rev.3x

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46854

4 years agobrcm2708: update 4.1 patches
Felix Fietkau [Fri, 11 Sep 2015 16:32:00 +0000 (16:32 +0000)]
brcm2708: update 4.1 patches

As usual, this patches were taken (and rebased) from
https://github.com/raspberrypi/linux/commits/rpi-4.1.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
SVN-Revision: 46853

4 years agotarget: ar71xx: add support for COMFAST CF-E316N v2 board
Felix Fietkau [Fri, 11 Sep 2015 16:31:35 +0000 (16:31 +0000)]
target: ar71xx: add support for COMFAST CF-E316N v2 board

This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 46852

4 years agohostapd: work around unconditional libopenssl build dependency
Felix Fietkau [Fri, 11 Sep 2015 16:31:18 +0000 (16:31 +0000)]
hostapd: work around unconditional libopenssl build dependency

As the OpenWrt build system only resolves build dependencies per directory,
all hostapd variants were causing libopenssl to be downloaded and built,
not only wpad-mesh. Fix this by applying the same workaround as in
ustream-ssl.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46851

4 years agoopkg: work around unconditional libopenssl build dependency
Felix Fietkau [Fri, 11 Sep 2015 16:31:01 +0000 (16:31 +0000)]
opkg: work around unconditional libopenssl build dependency

As the OpenWrt build system only resolves build dependencies per directory,
all opkg variants were causing libopenssl to be downloaded and built,
not only opkg-smime. Fix this by applying the same workaround as in
ustream-ssl.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 46850

4 years agobase-files: change banner to Designated Driver release
Rafał Miłecki [Fri, 11 Sep 2015 08:56:37 +0000 (08:56 +0000)]
base-files: change banner to Designated Driver release

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46846

4 years agocomgt-ncm: Add possibility to choose PDP context type
Steven Barth [Fri, 11 Sep 2015 06:46:42 +0000 (06:46 +0000)]
comgt-ncm: Add possibility to choose PDP context type

By setting the option pdptype to IP, IPV6 or IPV4V6 the user can
choose the context type between IPv4, IPv6 and dual stack,
respectively. The default setting is dual stack, except if option
ipv6=0 is specified, in which case IPv4 context is the default.
This allows for an out-of-the-box IPv6 support with modems
utilizing NCM-like protocols.

While we are at it, also add commands for Sierra DirectIP modems
(currently untested), which will allow us to drop the separate
comgt-directip package (once tested and verified working).

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 46844

4 years agouqmi: Add proper IPv6 support
Steven Barth [Fri, 11 Sep 2015 06:46:40 +0000 (06:46 +0000)]
uqmi: Add proper IPv6 support

Use the new --ip-family option to start both IPv4 and IPv6 sessions
by default. Autoconnect can't be used when starting two sessions,
so revert back to using the client IDs and packet data handles for
handling the network connection.

Some modem firmwares do not implement a RA server, therefore by
default use outband IP configuration and static addressing. Some
other firmwares report bogus IP configuration with the WDS get
current settings command. In this case inband configuration with
DHCP/RA can be optionally enabled by setting option dhcp to 1.

Per 3GPP standard a /64 prefix is served to all clients, which is
extended to LAN as specified in RFC 7278.

v2: Restrict the IPv6 gateway route source address
Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
SVN-Revision: 46843

4 years agofirewall: Remove src_port from firewall.config to receive dhcpv6 replies
Steven Barth [Fri, 11 Sep 2015 06:46:35 +0000 (06:46 +0000)]
firewall: Remove src_port from firewall.config to receive dhcpv6 replies

Seems like my second try was again whitespace broken. Sorry for the noise.

Remove src_port from firewall.config to receive dhcpv6 replies. Fixes #20295.

Signed-off-by: Anselm Eberhardt <a.eberhardt@cygnusnetworks.de>
SVN-Revision: 46842

4 years agonetifd: update to the latest version, fixes a WDS STA mode regression caused by multi...
Felix Fietkau [Thu, 10 Sep 2015 21:00:19 +0000 (21:00 +0000)]
netifd: update to the latest version, fixes a WDS STA mode regression caused by multicast-to-unicast handling (#20466)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46841

4 years agoimagebuilder: run build prereq checks before building image to set up host commands...
Felix Fietkau [Thu, 10 Sep 2015 11:06:42 +0000 (11:06 +0000)]
imagebuilder: run build prereq checks before building image to set up host commands properly

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46840

4 years agoipq806x: fix uninitialized variable usage in cpufreq-krait
Jonas Gorski [Thu, 10 Sep 2015 10:09:42 +0000 (10:09 +0000)]
ipq806x: fix uninitialized variable usage in cpufreq-krait

In krait_cpufreq_probe, both freq and max_cpu_freq are never
initialized, so the max_cpu_freq will have a random value at the end.
Fix this by properly initializing max_cpu_freq to 0 and storing the clk
frequency in freq as well, to make it similar to how it's calculated in
krait_set_target.

Fixes the following warnings:

In file included from include/linux/clk.h:16:0,
                 from drivers/cpufreq/cpufreq-krait.c:13:
drivers/cpufreq/cpufreq-krait.c: In function 'krait_cpufreq_probe':
include/linux/kernel.h:714:24: warning: 'freq' may be used uninitialized in this function [-Wmaybe-uninitialized]
  _max1 > _max2 ? _max1 : _max2; })
                        ^
drivers/cpufreq/cpufreq-krait.c:217:25: note: 'freq' was declared here
  unsigned long freq_Hz, freq, max_cpu_freq;
                         ^
In file included from include/linux/clk.h:16:0,
                 from drivers/cpufreq/cpufreq-krait.c:13:
include/linux/kernel.h:714:24: warning: 'max_cpu_freq' may be used uninitialized in this function [-Wmaybe-uninitialized]
  _max1 > _max2 ? _max1 : _max2; })
                        ^
drivers/cpufreq/cpufreq-krait.c:217:31: note: 'max_cpu_freq' was declared here
  unsigned long freq_Hz, freq, max_cpu_freq;

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46839

4 years agoipq806x: modules: fix typo in usb-dwc3-qcom dependencies
Jonas Gorski [Thu, 10 Sep 2015 10:09:36 +0000 (10:09 +0000)]
ipq806x: modules: fix typo in usb-dwc3-qcom dependencies

The phy driver has its qcom-dwc3 order switched in contrast to the usb
controller driver.

Signed-off-by: Kaspar Schleiser <kaspar@schleiser.de>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46838

4 years agoipq806x: fix R7500 kernel generation
Jonas Gorski [Thu, 10 Sep 2015 10:09:26 +0000 (10:09 +0000)]
ipq806x: fix R7500 kernel generation

Obviously the dummy rootfs must be after the kernel (uImage), not
included in it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46837

4 years agobusybox: lock: implement -n "Fail rather than wait"
Felix Fietkau [Wed, 9 Sep 2015 20:36:10 +0000 (20:36 +0000)]
busybox: lock: implement -n "Fail rather than wait"

lock -n is similiar to flock -n. If the lock was already taken,
fail with exit code = 1 and write error message to stderr.

example:
if ! lock -n /tmp/foo ; then
echo lock exits.
else
echo lock was free. But is locked now.
fi
> lock was free. But is locked now.
> lock exists.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 46836

4 years agogeneric: Fix per interface nf_call_iptables setting
Felix Fietkau [Wed, 9 Sep 2015 18:40:15 +0000 (18:40 +0000)]
generic: Fix per interface nf_call_iptables setting

commit r30917 ("kernel: bypass all netfilter hooks if the sysctls for that
functionality have been disabled - eliminates the overhead of enabling
CONFIG_BRIDGE_NETFILTER in the kernel config") introduced an optimization
which should reduce/eliminate the overhead for traffic send over bridges on
kernels compiled with CONFIG_BRIDGE_NETFILTER=y. But this optimization
breaks the nf_call_iptables per bridge setting which is more fine grained
than the global sysctl net.bridge.bridge-nf-call-iptables setting.

A test reflecting a real world setup was created to identify if this really
eliminates the overhead and if per-bridge nf_call_iptables could be used in
some setups to increase the throughput. A Qualcomm Atheros QCA9558 based
system with one ethernet and an ath9k wifi 3x3 in HT40 mode was used.
Cables from the AP to the wifi station were used to reduce interference
problems during the tests.

The wlan interface was put in one bridge interface called br-wlan. This
bridge usually contains some more wlan interfaces. The eth0 was put in a
second bridge called br-lan. This usually contains some other privileged
wlan or mesh interfaces. Routing was added between br-lan and br-wlan.

Three kernels were tested:

 * (default) OpenWrt kernel for this device
 * (brfilter-global) OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y
 * (brfilter-local)  OpenWrt kernel with CONFIG_BRIDGE_NETFILTER=y and
    without 644-bridge_optimize_netfilter_hooks.patch

The changes to the the netfilter settings of the bridge were done via:

 * (brfilter-global) /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=1
 * (brfilter-lobal) echo 1 > /sys/class/net/br-lan/bridge/nf_call_iptables
   and/or echo 1 > /sys/class/net/br-wan/bridge/nf_call_iptables

A station connected to the wlan0 (AP) interface was used to send traffic to
a PC connected via ethernet. iperf with 3 concurrent transmissions was used
to generate the traffic.

| kernel          | br-nf-* global | nf-call* iface | download | upload   |
|-----------------|----------------|----------------|----------|----------|
| default         | 0              | -              |      209 |      268 |
| brfilter-global | 0              | -              |      185 |      243 |
| brfilter-local  | 0              | -              |      187 |      243 |
| brfilter-local  | 0              | br-lan         |      157 |      226 |
| brfilter-local  | 0              | br-lan br-wlan |      139 |      161 |
| brfilter-global | 1              | -              |      136 |      162 |

Download/upload results in Mibit/s

It can be seen that the patch doesn't eliminate the overhead. It can also
be seen that the throughput of brfilter-global and brfilter-local with
disabled filtering is the roughly the same. Also the throughput for
brfilter-global and brfilter-local for enabled filtering on all bridges is
roughly the same.

But also the brfilter-local throughput is higher when only br-lan requires
the filtering. This setting would not be possible with
644-bridge_optimize_netfilter_hooks.patch applied and thus can only be
compared with brfilter-global and filtering enabled for all interfaces.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 46835

4 years agolinux: make IPv6 builtin if selected (saves >30KB)
Steven Barth [Wed, 9 Sep 2015 12:20:36 +0000 (12:20 +0000)]
linux: make IPv6 builtin if selected (saves >30KB)

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46834

4 years agobusybox: fix ip applet and netlink behavior
Steven Barth [Wed, 9 Sep 2015 10:38:16 +0000 (10:38 +0000)]
busybox: fix ip applet and netlink behavior

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46833

4 years agopackage: replace ifconfig-usage with ip
Steven Barth [Tue, 8 Sep 2015 17:44:24 +0000 (17:44 +0000)]
package: replace ifconfig-usage with ip

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46832

4 years agoiproute2: improve ip-full coexistence, remove rt_table
Steven Barth [Tue, 8 Sep 2015 17:44:17 +0000 (17:44 +0000)]
iproute2: improve ip-full coexistence, remove rt_table

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46831

4 years agobase-files: add /etc/iproute2/rt_tables, replace ifconfig-usage
Steven Barth [Tue, 8 Sep 2015 17:44:13 +0000 (17:44 +0000)]
base-files: add /etc/iproute2/rt_tables, replace ifconfig-usage

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46830

4 years agobusybox: improve applets & deprecate ifconfig, route
Steven Barth [Tue, 8 Sep 2015 17:44:10 +0000 (17:44 +0000)]
busybox: improve applets & deprecate ifconfig, route

added: ip addr, ip route, ip link, traceroute6
removed: hostid, devmem, vconfig, arping
deprecated (to be removed): ifconfig, route

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46829

4 years agokernel: describe bridge patch "multicast to unicast"
Rafał Miłecki [Tue, 8 Sep 2015 16:43:32 +0000 (16:43 +0000)]
kernel: describe bridge patch "multicast to unicast"

It was initially added in r41367 by nbd.

SVN-Revision: 46828

4 years agokernel: describe bridge patch "optimize netfilter hooks"
Rafał Miłecki [Tue, 8 Sep 2015 16:43:21 +0000 (16:43 +0000)]
kernel: describe bridge patch "optimize netfilter hooks"

It was initially added in r30917 by nbd.

SVN-Revision: 46827

4 years agokernel: describe bridge patch "remove IPv6 depependency of bridge in 2.6.38+"
Rafał Miłecki [Tue, 8 Sep 2015 16:43:10 +0000 (16:43 +0000)]
kernel: describe bridge patch "remove IPv6 depependency of bridge in 2.6.38+"

It was initially added in r27237 by jow as patch from Jonas.

SVN-Revision: 46826

4 years agokernel: describe bridge patch "port isolate"
Rafał Miłecki [Tue, 8 Sep 2015 16:43:04 +0000 (16:43 +0000)]
kernel: describe bridge patch "port isolate"

It was initially added in r25762 by nbd.

SVN-Revision: 46825

4 years agokernel: describe bridge patch "always accept EAP"
Rafał Miłecki [Tue, 8 Sep 2015 16:42:58 +0000 (16:42 +0000)]
kernel: describe bridge patch "always accept EAP"

It was initially added in r26015 by nbd.

SVN-Revision: 46824

4 years agokernel: describe bridge patch "no EAP forward"
Rafał Miłecki [Tue, 8 Sep 2015 16:42:50 +0000 (16:42 +0000)]
kernel: describe bridge patch "no EAP forward"

It was initially added in r25095 by nbd.

SVN-Revision: 46823

4 years agokernel: restore 640-bridge_no_eap_forward.patch to its original form
Felix Fietkau [Tue, 8 Sep 2015 14:29:55 +0000 (14:29 +0000)]
kernel: restore 640-bridge_no_eap_forward.patch to its original form

It was corrupted in r38528. The most obvious symptom is repeated messages like this:

Tue Sep  8 08:25:18 2015 kern.warn kernel: [77141.972226] br-lan: received packet on wlan0 with own address as source address

Signed-off-by: Dmitry Ivanov <dima@ubnt.com>
SVN-Revision: 46821

4 years agokernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4
Felix Fietkau [Tue, 8 Sep 2015 12:31:04 +0000 (12:31 +0000)]
kernel: remove packaging of kmod-crypto-core and kmod-crypto-arc4

Everything except for blkcipher was already built-in, so make blkcipher
built-in as well.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46820

4 years agomap: be less restrictive when matching lw4over6 prefixes
Steven Barth [Tue, 8 Sep 2015 12:13:29 +0000 (12:13 +0000)]
map: be less restrictive when matching lw4over6 prefixes

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46819

4 years agoiw: reduce size even more (~12k after gzip)
Felix Fietkau [Tue, 8 Sep 2015 11:48:48 +0000 (11:48 +0000)]
iw: reduce size even more (~12k after gzip)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46818

4 years agomusl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma
Felix Fietkau [Tue, 8 Sep 2015 10:57:11 +0000 (10:57 +0000)]
musl: add a hack to remove unused crypt() algorithms, saves ~14k after lzma

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46816

4 years agodropbear: remove generation and configuration of DSS keys
Steven Barth [Tue, 8 Sep 2015 08:59:40 +0000 (08:59 +0000)]
dropbear: remove generation and configuration of DSS keys

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46815

4 years agodropbear: disable 3des, cbc mode, dss support, saves about 5k gzipped
Felix Fietkau [Tue, 8 Sep 2015 08:55:10 +0000 (08:55 +0000)]
dropbear: disable 3des, cbc mode, dss support, saves about 5k gzipped

While technically required by the RFC, they are usually completely
unused (DSA), or have security issues (3DES, CBC)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46814

4 years agoargp-standalone: fix build error with gcc 5.2 (#20460)
Felix Fietkau [Tue, 8 Sep 2015 07:10:07 +0000 (07:10 +0000)]
argp-standalone: fix build error with gcc 5.2 (#20460)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46813

4 years agobrcm47xx: apply serial flash size trick to Netgear WNR1000 V3
Rafał Miłecki [Tue, 8 Sep 2015 05:24:57 +0000 (05:24 +0000)]
brcm47xx: apply serial flash size trick to Netgear WNR1000 V3

It also uses different block size just like WGR614 V10.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46810

4 years agoDisable telnet in favor of passwordless SSH
Steven Barth [Mon, 7 Sep 2015 19:29:25 +0000 (19:29 +0000)]
Disable telnet in favor of passwordless SSH

This enables passworldless login for root via SSH whenever no root
password is set (e.g. after reset, flashing without keeping config
or in failsafe) and removes telnet support alltogether.

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46809

4 years agouhttpd: update to the latest version, fixes deferred cgi script processing (#20458)
Felix Fietkau [Mon, 7 Sep 2015 19:18:58 +0000 (19:18 +0000)]
uhttpd: update to the latest version, fixes deferred cgi script processing (#20458)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46807

4 years agobrcm47xx: fix reading WGT634U CFE variables with 4.1
Rafał Miłecki [Mon, 7 Sep 2015 16:43:29 +0000 (16:43 +0000)]
brcm47xx: fix reading WGT634U CFE variables with 4.1

This ports fix from r46584 to the 4.1.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46806

4 years agobrcm47xx: add Netgear WNR1000 V3 support in the Linux arch code
Rafał Miłecki [Mon, 7 Sep 2015 16:29:21 +0000 (16:29 +0000)]
brcm47xx: add Netgear WNR1000 V3 support in the Linux arch code

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46805

4 years agomap: ignore insignificant PSID bits
Steven Barth [Mon, 7 Sep 2015 16:21:15 +0000 (16:21 +0000)]
map: ignore insignificant PSID bits

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46804

4 years agoodhcpd: fix parsing of host entries without duid
Steven Barth [Mon, 7 Sep 2015 13:31:36 +0000 (13:31 +0000)]
odhcpd: fix parsing of host entries without duid

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46803

4 years agoodhcpd: various bugfixes
Steven Barth [Mon, 7 Sep 2015 09:49:35 +0000 (09:49 +0000)]
odhcpd: various bugfixes

* ra: don't announce as default router if we aren't (regression)
* ra: reduce maximum announced dns lifetimes due to buggy clients
* dhcpv6: fix mac-based lease-matching

Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46802

4 years agonls.mk: add -rpath-link when needed for NLS support
Steven Barth [Mon, 7 Sep 2015 08:03:34 +0000 (08:03 +0000)]
nls.mk: add -rpath-link when needed for NLS support

When a package links to a shared library that depends on libiconv or
libintl shared libraries, specifying directory pathes to them via -L
switches is not enough, see "man 1 ld" -rpath-link description.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 46801

4 years agogcc: add missing powerpc patch for 5.2.0
Felix Fietkau [Mon, 7 Sep 2015 06:59:56 +0000 (06:59 +0000)]
gcc: add missing powerpc patch for 5.2.0

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46800

4 years agogcc: remove 4.6.3 leftovers
Felix Fietkau [Sun, 6 Sep 2015 10:07:07 +0000 (10:07 +0000)]
gcc: remove 4.6.3 leftovers

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46799

4 years agogcc: remove version 4.9-linaro
Felix Fietkau [Sun, 6 Sep 2015 10:07:03 +0000 (10:07 +0000)]
gcc: remove version 4.9-linaro

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46798

4 years agouboot-ar71xx: fix gcc 5.2 compile errors
Felix Fietkau [Sun, 6 Sep 2015 09:57:02 +0000 (09:57 +0000)]
uboot-ar71xx: fix gcc 5.2 compile errors

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46797

4 years agoipq806x: add support for Netgear Nighthawk X4 R7500
Jonas Gorski [Fri, 4 Sep 2015 14:46:06 +0000 (14:46 +0000)]
ipq806x: add support for Netgear Nighthawk X4 R7500

Add support for the Netgear Nighthawk X4 R7500 and build
appropariate sysupgrade and factory images.

Known issues:
 * 5 GHz wifi not working - there is no quantenna driver
 * One of the USB ports is not working

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46796

4 years agoipq806x: enable ide led trigger
Jonas Gorski [Fri, 4 Sep 2015 14:45:49 +0000 (14:45 +0000)]
ipq806x: enable ide led trigger

To use gpio leds as ide leds, we need to enable the trigger to be
included in the kernel.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46795

4 years agobase-files: allow setting ide-disk led trigger
Jonas Gorski [Fri, 4 Sep 2015 14:45:45 +0000 (14:45 +0000)]
base-files: allow setting ide-disk led trigger

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46794

4 years agoipq806x: add support for retrieving macs from mtd
Jonas Gorski [Fri, 4 Sep 2015 14:45:40 +0000 (14:45 +0000)]
ipq806x: add support for retrieving macs from mtd

Add support for mtd-mac-address for stmac.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46793

4 years agoimage: allow exactly KERNEL_SIZE sized kernels
Jonas Gorski [Fri, 4 Sep 2015 14:45:16 +0000 (14:45 +0000)]
image: allow exactly KERNEL_SIZE sized kernels

The KERNEL_SIZE should be the maximum size, inclusive, so we need to
check for greater equal, not just greater.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46792

4 years agoimage: move netgear-image to top and rename to -dni
Jonas Gorski [Fri, 4 Sep 2015 14:45:09 +0000 (14:45 +0000)]
image: move netgear-image to top and rename to -dni

Use the same naming as netgear-chk.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46791

4 years agoar71xx: rename NETGEAR_ variables to their netgear names
Jonas Gorski [Fri, 4 Sep 2015 14:45:04 +0000 (14:45 +0000)]
ar71xx: rename NETGEAR_ variables to their netgear names

Netgear names them BOARD_ID and HW_ID, so we should do the same.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46790