From 279eeeb744f1d3e0d3af7b5801324b05fbf75ffa Mon Sep 17 00:00:00 2001 From: John Crispin Date: Tue, 26 Apr 2016 11:43:06 +0000 Subject: [PATCH] ramips: add support for Planex MZK-EX300NP MZK-EX300NP is MT7620A based wifi repeater. Built-in power supply. 64MiB RAM, 8MiB SPI Flash, non Wired Ethernet. Signed-off-by: YuheiOKAWA SVN-Revision: 49235 --- .../ramips/base-files/etc/board.d/01_leds | 3 +- .../ramips/base-files/etc/board.d/02_network | 1 + target/linux/ramips/base-files/etc/diag.sh | 1 + target/linux/ramips/base-files/lib/ramips.sh | 3 + .../ramips/base-files/lib/upgrade/platform.sh | 1 + target/linux/ramips/dts/MZK-EX300NP.dts | 132 ++++++++++++++++++ target/linux/ramips/image/mt7620.mk | 2 + target/linux/ramips/mt7620/profiles/planex.mk | 11 ++ 8 files changed, 153 insertions(+), 1 deletion(-) create mode 100644 target/linux/ramips/dts/MZK-EX300NP.dts diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 367801d29c..a263b524a2 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -119,7 +119,8 @@ dir-615-h1) ucidef_set_led_default "status" "Status LED (amber)" "$board:amber:status" "0" set_wifi_led "rt2800pci-phy0::radio" ;; -dir-620-d1) +dir-620-d1|\ +mzk-ex300np) set_wifi_led "$board:green:wifi" ;; dir-810l|\ diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index dc3d1bc2ad..28fcc61352 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -163,6 +163,7 @@ ramips_setup_interfaces() cs-qr10|\ d105|\ hpm|\ + mzk-ex300np|\ na930|\ wli-tx4-ag300n|\ wrh-300cr) diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 2d43f54fbb..352357c6cd 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -155,6 +155,7 @@ get_status_led() { whr-600d) status_led="$board:orange:wifi" ;; + mzk-ex300np|\ rt-n10-plus|\ tew-691gr|\ tew-692gr|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 73dd599605..13d325dbbc 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -295,6 +295,9 @@ ramips_board_detect() { *"MZK-DP150N") name="mzk-dp150n" ;; + *"MZK-EX300NP") + name="mzk-ex300np" + ;; *"MZK-W300NH2"*) name="mzk-w300nh2" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index f153b0289e..522e78a604 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -89,6 +89,7 @@ platform_check_image() { mt7628|\ mzk-750dhp|\ mzk-dp150n|\ + mzk-ex300np|\ mzk-w300nh2|\ mzk-wdpr|\ nbg-419n|\ diff --git a/target/linux/ramips/dts/MZK-EX300NP.dts b/target/linux/ramips/dts/MZK-EX300NP.dts new file mode 100644 index 0000000000..fd5c5cdf1d --- /dev/null +++ b/target/linux/ramips/dts/MZK-EX300NP.dts @@ -0,0 +1,132 @@ +/dts-v1/; + +/include/ "mt7620a.dtsi" + +/ { + compatible = "ralink,mt7620a-soc"; + model = "Planex MZK-EX300NP"; + + palmbus@10000000 { + gpio1: gpio@638 { + status = "okay"; + }; + + gpio3: gpio@688 { + status = "okay"; + }; + + spi@b00 { + status = "okay"; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "jedec,spi-nor"; + reg = <0 0>; + linux,modalias = "m25p80", "w25q64"; + spi-max-frequency = <10000000>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x730000>; + }; + + partition@780000 { + label = "Udata"; + reg = <0x780000 0x80000>; + }; + }; + }; + }; + + pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "i2c", "spi refclk", "rgmii1", "wled"; + ralink,function = "gpio"; + }; + }; + }; + + ethernet@10100000 { + pinctrl-names = "default"; + pinctrl-0 = <&ephy_pins>; + mtd-mac-address = <&factory 0x4>; + mediatek,portmap = "llllw"; + }; + + wmac@10180000 { + ralink,mtd-eeprom = <&factory 0>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + wifi { + label = "mzk-ex300np:green:wifi"; + gpios = <&gpio3 0 1>; + }; + + wps { + label = "mzk-ex300np:green:wps"; + gpios = <&gpio1 5 1>; + }; + + rep { + label = "mzk-ex300np:blue:rep"; + gpios = <&gpio1 4 1>; + }; + + wifi1 { + label = "mzk-ex300np:blue:wifi1"; + gpios = <&gpio1 1 1>; + }; + + wifi2 { + label = "mzk-ex300np:blue:wifi2"; + gpios = <&gpio1 2 1>; + }; + + wifi3 { + label = "mzk-ex300np:blue:wifi3"; + gpios = <&gpio1 0 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 1 1>; + linux,code = <0x198>; + }; + + wps { + label = "wps"; + gpios = <&gpio1 3 0>; + linux,code = <0x211>; + }; + }; +}; diff --git a/target/linux/ramips/image/mt7620.mk b/target/linux/ramips/image/mt7620.mk index d742151401..35cb46a52d 100644 --- a/target/linux/ramips/image/mt7620.mk +++ b/target/linux/ramips/image/mt7620.mk @@ -101,6 +101,7 @@ na930_mtd_size=20971520 Image/Build/Profile/NA930=$(call BuildFirmware/CustomFlash/$(1),$(1),na930,NA930,$(na930_mtd_size)) Image/Build/Profile/DB-WRT01=$(call BuildFirmware/Default8M/$(1),$(1),db-wrt01,DB-WRT01) Image/Build/Profile/MZK-750DHP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-750dhp,MZK-750DHP) +Image/Build/Profile/MZK-EX300NP=$(call BuildFirmware/Default8M/$(1),$(1),mzk-ex300np,MZK-EX300NP) Image/Build/Profile/HC5661=$(call BuildFirmware/Default16M/$(1),$(1),hc5661,HC5661) Image/Build/Profile/HC5761=$(call BuildFirmware/Default16M/$(1),$(1),hc5761,HC5761) Image/Build/Profile/HC5861=$(call BuildFirmware/Default16M/$(1),$(1),hc5861,HC5861) @@ -147,6 +148,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/WHR1166D,$(1)) $(call Image/Build/Profile/DB-WRT01,$(1)) $(call Image/Build/Profile/MZK-750DHP,$(1)) + $(call Image/Build/Profile/MZK-EX300NP,$(1)) $(call Image/Build/Profile/NA930,$(1)) $(call Image/Build/Profile/HC5661,$(1)) $(call Image/Build/Profile/HC5761,$(1)) diff --git a/target/linux/ramips/mt7620/profiles/planex.mk b/target/linux/ramips/mt7620/profiles/planex.mk index 15560ab50d..157cf8d334 100644 --- a/target/linux/ramips/mt7620/profiles/planex.mk +++ b/target/linux/ramips/mt7620/profiles/planex.mk @@ -28,3 +28,14 @@ define Profile/MZK-750DHP/Description Package set optimized for the Planex MZK-750DHP. endef $(eval $(call Profile,MZK-750DHP)) + + +define Profile/MZK-EX300NP + NAME:=Planex MZK-EX300NP + PACKAGES:= +endef + +define Profile/MZK-EX300NP/Description + Package set optimized for the Planex MZK-EX300NP. +endef +$(eval $(call Profile,MZK-EX300NP)) -- 2.30.2