From f63463591b9f664353b4375f5dfdba980c7bdc07 Mon Sep 17 00:00:00 2001 From: Daniel Gimpelevich Date: Wed, 1 Aug 2018 07:51:47 -0700 Subject: [PATCH] ramips: fix gigabit switch PHY access on MDIO When PHY's are defined on the MDIO bus in the DTS, gigabit support was being masked out for no apparent reason, pegging all such ports to 10/100. If gigabit support must be disabled for some reason, there should be a "max-speed" property in the DTS. Reported-by: James McKenzie Signed-off-by: Daniel Gimpelevich (cherry picked from commit 379fe506729a20c5fdb072840cb662b032e90c36) --- target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/mdio.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/mdio.c b/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/mdio.c index bdfdf7a432..a1c115687e 100644 --- a/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/mdio.c +++ b/target/linux/ramips/files-4.14/drivers/net/ethernet/mtk/mdio.c @@ -110,7 +110,8 @@ static void phy_init(struct fe_priv *priv, struct phy_device *phy) phy->autoneg = AUTONEG_ENABLE; phy->speed = 0; phy->duplex = 0; - phy->supported &= PHY_BASIC_FEATURES; + phy->supported &= IS_ENABLED(CONFIG_NET_MEDIATEK_MDIO_MT7620) ? + PHY_GBIT_FEATURES : PHY_BASIC_FEATURES; phy->advertising = phy->supported | ADVERTISED_Autoneg; phy_start_aneg(phy); -- 2.30.2