kernel: merge a softirq performance improvement patch
[openwrt/staging/dedeckeh.git] / package / network / services / hostapd / files / hostapd-mini.config
1 # Example hostapd build time configuration
2 #
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
7 #
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cass, these lines should use += in order not
10 # to override previous values of the variables.
11
12 # Driver interface for Host AP driver
13 #CONFIG_DRIVER_HOSTAP=y
14
15 # Driver interface for wired authenticator
16 CONFIG_DRIVER_WIRED=y
17
18 # Driver interface for Prism54 driver
19 #CONFIG_DRIVER_PRISM54=y
20
21 # Driver interface for drivers using the nl80211 kernel interface
22 CONFIG_DRIVER_NL80211=y
23 # driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
24 # shipped with your distribution yet. If that is the case, you need to build
25 # newer libnl version and point the hostapd build to use it.
26 #LIBNL=/usr/src/libnl
27 #CFLAGS += -I$(LIBNL)/include
28 #LIBS += -L$(LIBNL)/lib
29
30 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
31 #CONFIG_DRIVER_BSD=y
32 #CFLAGS += -I/usr/local/include
33 #LIBS += -L/usr/local/lib
34
35 # Driver interface for no driver (e.g., RADIUS server only)
36 #CONFIG_DRIVER_NONE=y
37
38 # IEEE 802.11F/IAPP
39 # CONFIG_IAPP=y
40
41 # WPA2/IEEE 802.11i RSN pre-authentication
42 CONFIG_RSN_PREAUTH=y
43
44 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
45 CONFIG_PEERKEY=y
46
47 # IEEE 802.11w (management frame protection)
48 # This version is an experimental implementation based on IEEE 802.11w/D1.0
49 # draft and is subject to change since the standard has not yet been finalized.
50 # Driver support is also needed for IEEE 802.11w.
51 #CONFIG_IEEE80211W=y
52
53 # Integrated EAP server
54 #CONFIG_EAP=y
55
56 # EAP-MD5 for the integrated EAP server
57 #CONFIG_EAP_MD5=y
58
59 # EAP-TLS for the integrated EAP server
60 #CONFIG_EAP_TLS=y
61
62 # EAP-MSCHAPv2 for the integrated EAP server
63 #CONFIG_EAP_MSCHAPV2=y
64
65 # EAP-PEAP for the integrated EAP server
66 #CONFIG_EAP_PEAP=y
67
68 # EAP-GTC for the integrated EAP server
69 #CONFIG_EAP_GTC=y
70
71 # EAP-TTLS for the integrated EAP server
72 #CONFIG_EAP_TTLS=y
73
74 # EAP-SIM for the integrated EAP server
75 #CONFIG_EAP_SIM=y
76
77 # EAP-AKA for the integrated EAP server
78 #CONFIG_EAP_AKA=y
79
80 # EAP-AKA' for the integrated EAP server
81 # This requires CONFIG_EAP_AKA to be enabled, too.
82 #CONFIG_EAP_AKA_PRIME=y
83
84 # EAP-PAX for the integrated EAP server
85 #CONFIG_EAP_PAX=y
86
87 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
88 #CONFIG_EAP_PSK=y
89
90 # EAP-SAKE for the integrated EAP server
91 #CONFIG_EAP_SAKE=y
92
93 # EAP-GPSK for the integrated EAP server
94 #CONFIG_EAP_GPSK=y
95 # Include support for optional SHA256 cipher suite in EAP-GPSK
96 #CONFIG_EAP_GPSK_SHA256=y
97
98 # EAP-FAST for the integrated EAP server
99 # Note: Default OpenSSL package does not include support for all the
100 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
101 # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
102 # to add the needed functions.
103 #CONFIG_EAP_FAST=y
104
105 # Wi-Fi Protected Setup (WPS)
106 #CONFIG_WPS=y
107 # Enable UPnP support for external WPS Registrars
108 #CONFIG_WPS_UPNP=y
109
110 # EAP-IKEv2
111 #CONFIG_EAP_IKEV2=y
112
113 # Trusted Network Connect (EAP-TNC)
114 #CONFIG_EAP_TNC=y
115
116 # PKCS#12 (PFX) support (used to read private key and certificate file from
117 # a file that usually has extension .p12 or .pfx)
118 #CONFIG_PKCS12=y
119
120 # RADIUS authentication server. This provides access to the integrated EAP
121 # server from external hosts using RADIUS.
122 #CONFIG_RADIUS_SERVER=y
123
124 # Build IPv6 support for RADIUS operations
125 #CONFIG_IPV6=y
126
127 # IEEE Std 802.11r-2008 (Fast BSS Transition)
128 #CONFIG_IEEE80211R=y
129
130 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
131 # the IEEE 802.11 Management capability (e.g. FreeBSD/net80211)
132 #CONFIG_DRIVER_RADIUS_ACL=y
133
134 # IEEE 802.11n (High Throughput) support
135 CONFIG_IEEE80211N=y
136
137 # IEEE 802.11ac (Very High Throughput) support
138 CONFIG_IEEE80211AC=y
139
140 # Remove debugging code that is printing out debug messages to stdout.
141 # This can be used to reduce the size of the hostapd considerably if debugging
142 # code is not needed.
143 #CONFIG_NO_STDOUT_DEBUG=y
144
145 # Remove support for RADIUS accounting
146 CONFIG_NO_ACCOUNTING=y
147
148 # Remove support for RADIUS
149 CONFIG_NO_RADIUS=y
150
151 # Remove support for VLANs
152 #CONFIG_NO_VLAN=y
153
154 CONFIG_TLS=internal
155
156 CONFIG_NO_RANDOM_POOL=y
157 CONFIG_NO_DUMP_STATE=y
158
159 CONFIG_UBUS=y