package/network/services/hostapd/files/hostapd-mini.config

   1 # Example hostapd build time configuration
   2 #
   3 # This file lists the configuration options that are used when building the
   4 # hostapd binary. All lines starting with # are ignored. Configuration option
   5 # lines must be commented out complete, if they are not to be included, i.e.,
   6 # just setting VARIABLE=n is not disabling that variable.
   7 #
   8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
   9 # be modified from here. In most cass, these lines should use += in order not
  10 # to override previous values of the variables.
  11
  12 # Driver interface for Host AP driver
  13 CONFIG_DRIVER_HOSTAP=y
  14
  15 # Driver interface for wired authenticator
  16 CONFIG_DRIVER_WIRED=y
  17
  18 # Driver interface for Prism54 driver
  19 #CONFIG_DRIVER_PRISM54=y
  20
  21 # Driver interface for drivers using the nl80211 kernel interface
  22 CONFIG_DRIVER_NL80211=y
  23 # driver_nl80211.c requires a rather new libnl (version 1.1) which may not be
  24 # shipped with your distribution yet. If that is the case, you need to build
  25 # newer libnl version and point the hostapd build to use it.
  26 #LIBNL=/usr/src/libnl
  27 #CFLAGS += -I$(LIBNL)/include
  28 #LIBS += -L$(LIBNL)/lib
  29
  30 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
  31 #CONFIG_DRIVER_BSD=y
  32 #CFLAGS += -I/usr/local/include
  33 #LIBS += -L/usr/local/lib
  34
  35 # Driver interface for no driver (e.g., RADIUS server only)
  36 #CONFIG_DRIVER_NONE=y
  37
  38 # IEEE 802.11F/IAPP
  39 # CONFIG_IAPP=y
  40
  41 # WPA2/IEEE 802.11i RSN pre-authentication
  42 CONFIG_RSN_PREAUTH=y
  43
  44 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
  45 CONFIG_PEERKEY=y
  46
  47 # IEEE 802.11w (management frame protection)
  48 # This version is an experimental implementation based on IEEE 802.11w/D1.0
  49 # draft and is subject to change since the standard has not yet been finalized.
  50 # Driver support is also needed for IEEE 802.11w.
  51 #CONFIG_IEEE80211W=y
  52
  53 # Integrated EAP server
  54 #CONFIG_EAP=y
  55
  56 # EAP-MD5 for the integrated EAP server
  57 #CONFIG_EAP_MD5=y
  58
  59 # EAP-TLS for the integrated EAP server
  60 #CONFIG_EAP_TLS=y
  61
  62 # EAP-MSCHAPv2 for the integrated EAP server
  63 #CONFIG_EAP_MSCHAPV2=y
  64
  65 # EAP-PEAP for the integrated EAP server
  66 #CONFIG_EAP_PEAP=y
  67
  68 # EAP-GTC for the integrated EAP server
  69 #CONFIG_EAP_GTC=y
  70
  71 # EAP-TTLS for the integrated EAP server
  72 #CONFIG_EAP_TTLS=y
  73
  74 # EAP-SIM for the integrated EAP server
  75 #CONFIG_EAP_SIM=y
  76
  77 # EAP-AKA for the integrated EAP server
  78 #CONFIG_EAP_AKA=y
  79
  80 # EAP-AKA' for the integrated EAP server
  81 # This requires CONFIG_EAP_AKA to be enabled, too.
  82 #CONFIG_EAP_AKA_PRIME=y
  83
  84 # EAP-PAX for the integrated EAP server
  85 #CONFIG_EAP_PAX=y
  86
  87 # EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
  88 #CONFIG_EAP_PSK=y
  89
  90 # EAP-SAKE for the integrated EAP server
  91 #CONFIG_EAP_SAKE=y
  92
  93 # EAP-GPSK for the integrated EAP server
  94 #CONFIG_EAP_GPSK=y
  95 # Include support for optional SHA256 cipher suite in EAP-GPSK
  96 #CONFIG_EAP_GPSK_SHA256=y
  97
  98 # EAP-FAST for the integrated EAP server
  99 # Note: Default OpenSSL package does not include support for all the
 100 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
 101 # the OpenSSL library must be patched (openssl-0.9.9-session-ticket.patch)
 102 # to add the needed functions.
 103 #CONFIG_EAP_FAST=y
 104
 105 # Wi-Fi Protected Setup (WPS)
 106 #CONFIG_WPS=y
 107 # Enable UPnP support for external WPS Registrars
 108 #CONFIG_WPS_UPNP=y
 109
 110 # EAP-IKEv2
 111 #CONFIG_EAP_IKEV2=y
 112
 113 # Trusted Network Connect (EAP-TNC)
 114 #CONFIG_EAP_TNC=y
 115
 116 # PKCS#12 (PFX) support (used to read private key and certificate file from
 117 # a file that usually has extension .p12 or .pfx)
 118 #CONFIG_PKCS12=y
 119
 120 # RADIUS authentication server. This provides access to the integrated EAP
 121 # server from external hosts using RADIUS.
 122 #CONFIG_RADIUS_SERVER=y
 123
 124 # Build IPv6 support for RADIUS operations
 125 #CONFIG_IPV6=y
 126
 127 # IEEE Std 802.11r-2008 (Fast BSS Transition)
 128 #CONFIG_IEEE80211R=y
 129
 130 # Use the hostapd's IEEE 802.11 authentication (ACL), but without
 131 # the IEEE 802.11 Management capability (e.g. FreeBSD/net80211)
 132 #CONFIG_DRIVER_RADIUS_ACL=y
 133
 134 # IEEE 802.11n (High Throughput) support
 135 CONFIG_IEEE80211N=y
 136
 137 # IEEE 802.11ac (Very High Throughput) support
 138 CONFIG_IEEE80211AC=y
 139
 140 # Remove debugging code that is printing out debug messages to stdout.
 141 # This can be used to reduce the size of the hostapd considerably if debugging
 142 # code is not needed.
 143 #CONFIG_NO_STDOUT_DEBUG=y
 144
 145 # Remove support for RADIUS accounting
 146 CONFIG_NO_ACCOUNTING=y
 147
 148 # Remove support for RADIUS
 149 CONFIG_NO_RADIUS=y
 150
 151 # Remove support for VLANs
 152 #CONFIG_NO_VLAN=y
 153
 154 CONFIG_TLS=internal
 155
 156 CONFIG_NO_RANDOM_POOL=y
 157 CONFIG_NO_DUMP_STATE=y
 158
 159 CONFIG_ACS=y
 160
 161 CONFIG_UBUS=y