kernel: merge a softirq performance improvement patch
[openwrt/staging/dedeckeh.git] / package / network / services / hostapd / files / wpa_supplicant-full.config
1 # Example wpa_supplicant build time configuration
2 #
3 # This file lists the configuration options that are used when building the
4 # hostapd binary. All lines starting with # are ignored. Configuration option
5 # lines must be commented out complete, if they are not to be included, i.e.,
6 # just setting VARIABLE=n is not disabling that variable.
7 #
8 # This file is included in Makefile, so variables like CFLAGS and LIBS can also
9 # be modified from here. In most cases, these lines should use += in order not
10 # to override previous values of the variables.
11
12
13 # Uncomment following two lines and fix the paths if you have installed OpenSSL
14 # or GnuTLS in non-default location
15 #CFLAGS += -I/usr/local/openssl/include
16 #LIBS += -L/usr/local/openssl/lib
17
18 # Some Red Hat versions seem to include kerberos header files from OpenSSL, but
19 # the kerberos files are not in the default include path. Following line can be
20 # used to fix build issues on such systems (krb5.h not found).
21 #CFLAGS += -I/usr/include/kerberos
22
23 # Example configuration for various cross-compilation platforms
24
25 #### sveasoft (e.g., for Linksys WRT54G) ######################################
26 #CC=mipsel-uclibc-gcc
27 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
28 #CFLAGS += -Os
29 #CPPFLAGS += -I../src/include -I../../src/router/openssl/include
30 #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl
31 ###############################################################################
32
33 #### openwrt (e.g., for Linksys WRT54G) #######################################
34 #CC=mipsel-uclibc-gcc
35 #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc
36 #CFLAGS += -Os
37 #CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \
38 # -I../WRT54GS/release/src/include
39 #LIBS = -lssl
40 ###############################################################################
41
42
43 # Driver interface for Host AP driver
44 #CONFIG_DRIVER_HOSTAP=y
45
46 # Driver interface for Agere driver
47 #CONFIG_DRIVER_HERMES=y
48 # Change include directories to match with the local setup
49 #CFLAGS += -I../../hcf -I../../include -I../../include/hcf
50 #CFLAGS += -I../../include/wireless
51
52 # Driver interface for ndiswrapper
53 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
54 #CONFIG_DRIVER_NDISWRAPPER=y
55
56 # Driver interface for Atmel driver
57 # CONFIG_DRIVER_ATMEL=y
58
59 # Driver interface for old Broadcom driver
60 # Please note that the newer Broadcom driver ("hybrid Linux driver") supports
61 # Linux wireless extensions and does not need (or even work) with the old
62 # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver.
63 #CONFIG_DRIVER_BROADCOM=y
64 # Example path for wlioctl.h; change to match your configuration
65 #CFLAGS += -I/opt/WRT54GS/release/src/include
66
67 # Driver interface for Intel ipw2100/2200 driver
68 # Deprecated; use CONFIG_DRIVER_WEXT=y instead.
69 #CONFIG_DRIVER_IPW=y
70
71 # Driver interface for Ralink driver
72 #CONFIG_DRIVER_RALINK=y
73
74 # Driver interface for generic Linux wireless extensions
75 CONFIG_DRIVER_WEXT=y
76
77 # Driver interface for Linux drivers using the nl80211 kernel interface
78 CONFIG_DRIVER_NL80211=y
79
80 # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver)
81 #CONFIG_DRIVER_BSD=y
82 #CFLAGS += -I/usr/local/include
83 #LIBS += -L/usr/local/lib
84 #LIBS_p += -L/usr/local/lib
85 #LIBS_c += -L/usr/local/lib
86
87 # Driver interface for Windows NDIS
88 #CONFIG_DRIVER_NDIS=y
89 #CFLAGS += -I/usr/include/w32api/ddk
90 #LIBS += -L/usr/local/lib
91 # For native build using mingw
92 #CONFIG_NATIVE_WINDOWS=y
93 # Additional directories for cross-compilation on Linux host for mingw target
94 #CFLAGS += -I/opt/mingw/mingw32/include/ddk
95 #LIBS += -L/opt/mingw/mingw32/lib
96 #CC=mingw32-gcc
97 # By default, driver_ndis uses WinPcap for low-level operations. This can be
98 # replaced with the following option which replaces WinPcap calls with NDISUIO.
99 # However, this requires that WZC is disabled (net stop wzcsvc) before starting
100 # wpa_supplicant.
101 # CONFIG_USE_NDISUIO=y
102
103 # Driver interface for development testing
104 #CONFIG_DRIVER_TEST=y
105
106 # Include client MLME (management frame processing) for test driver
107 # This can be used to test MLME operations in hostapd with the test interface.
108 # space.
109 #CONFIG_CLIENT_MLME=y
110
111 # Driver interface for wired Ethernet drivers
112 CONFIG_DRIVER_WIRED=y
113
114 # Driver interface for the Broadcom RoboSwitch family
115 #CONFIG_DRIVER_ROBOSWITCH=y
116
117 # Driver interface for no driver (e.g., WPS ER only)
118 #CONFIG_DRIVER_NONE=y
119
120 # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is
121 # included)
122 CONFIG_IEEE8021X_EAPOL=y
123
124 # EAP-FAST
125 CONFIG_EAP_FAST=y
126
127 # EAP-MD5
128 CONFIG_EAP_MD5=y
129
130 # EAP-MSCHAPv2
131 CONFIG_EAP_MSCHAPV2=y
132
133 # EAP-TLS
134 CONFIG_EAP_TLS=y
135
136 # EAL-PEAP
137 CONFIG_EAP_PEAP=y
138
139 # EAP-TTLS
140 CONFIG_EAP_TTLS=y
141
142 # EAP-FAST
143 # Note: Default OpenSSL package does not include support for all the
144 # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL,
145 # the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch)
146 # to add the needed functions.
147 #CONFIG_EAP_FAST=y
148
149 # EAP-GTC
150 CONFIG_EAP_GTC=y
151
152 # EAP-OTP
153 CONFIG_EAP_OTP=y
154
155 # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used)
156 #CONFIG_EAP_SIM=y
157
158 # EAP-PSK (experimental; this is _not_ needed for WPA-PSK)
159 #CONFIG_EAP_PSK=y
160
161 # EAP-PAX
162 #CONFIG_EAP_PAX=y
163
164 # LEAP
165 CONFIG_EAP_LEAP=y
166
167 # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used)
168 #CONFIG_EAP_AKA=y
169
170 # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used).
171 # This requires CONFIG_EAP_AKA to be enabled, too.
172 #CONFIG_EAP_AKA_PRIME=y
173
174 # Enable USIM simulator (Milenage) for EAP-AKA
175 #CONFIG_USIM_SIMULATOR=y
176
177 # EAP-SAKE
178 #CONFIG_EAP_SAKE=y
179
180 # EAP-GPSK
181 #CONFIG_EAP_GPSK=y
182 # Include support for optional SHA256 cipher suite in EAP-GPSK
183 #CONFIG_EAP_GPSK_SHA256=y
184
185 # EAP-TNC and related Trusted Network Connect support (experimental)
186 #CONFIG_EAP_TNC=y
187
188 # Wi-Fi Protected Setup (WPS)
189 CONFIG_WPS=y
190
191 # EAP-IKEv2
192 #CONFIG_EAP_IKEV2=y
193
194 # PKCS#12 (PFX) support (used to read private key and certificate file from
195 # a file that usually has extension .p12 or .pfx)
196 CONFIG_PKCS12=y
197
198 # Smartcard support (i.e., private key on a smartcard), e.g., with openssl
199 # engine.
200 CONFIG_SMARTCARD=y
201
202 # PC/SC interface for smartcards (USIM, GSM SIM)
203 # Enable this if EAP-SIM or EAP-AKA is included
204 #CONFIG_PCSC=y
205
206 # Development testing
207 #CONFIG_EAPOL_TEST=y
208
209 # Select control interface backend for external programs, e.g, wpa_cli:
210 # unix = UNIX domain sockets (default for Linux/*BSD)
211 # udp = UDP sockets using localhost (127.0.0.1)
212 # named_pipe = Windows Named Pipe (default for Windows)
213 # y = use default (backwards compatibility)
214 # If this option is commented out, control interface is not included in the
215 # build.
216 CONFIG_CTRL_IFACE=y
217
218 # Include support for GNU Readline and History Libraries in wpa_cli.
219 # When building a wpa_cli binary for distribution, please note that these
220 # libraries are licensed under GPL and as such, BSD license may not apply for
221 # the resulting binary.
222 #CONFIG_READLINE=y
223
224 # Remove debugging code that is printing out debug message to stdout.
225 # This can be used to reduce the size of the wpa_supplicant considerably
226 # if debugging code is not needed. The size reduction can be around 35%
227 # (e.g., 90 kB).
228 #CONFIG_NO_STDOUT_DEBUG=y
229
230 # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save
231 # 35-50 kB in code size.
232 #CONFIG_NO_WPA=y
233
234 # Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to
235 # save about 1 kB in code size when building only WPA-Personal (no EAP support)
236 # or 6 kB if building for WPA-Enterprise.
237 #CONFIG_NO_WPA2=y
238
239 # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support
240 # This option can be used to reduce code size by removing support for
241 # converting ASCII passphrases into PSK. If this functionality is removed, the
242 # PSK can only be configured as the 64-octet hexstring (e.g., from
243 # wpa_passphrase). This saves about 0.5 kB in code size.
244 #CONFIG_NO_WPA_PASSPHRASE=y
245
246 # Disable scan result processing (ap_mode=1) to save code size by about 1 kB.
247 # This can be used if ap_scan=1 mode is never enabled.
248 #CONFIG_NO_SCAN_PROCESSING=y
249
250 # Select configuration backend:
251 # file = text file (e.g., wpa_supplicant.conf; note: the configuration file
252 # path is given on command line, not here; this option is just used to
253 # select the backend that allows configuration files to be used)
254 # winreg = Windows registry (see win_example.reg for an example)
255 CONFIG_BACKEND=file
256
257 # Remove configuration write functionality (i.e., to allow the configuration
258 # file to be updated based on runtime configuration changes). The runtime
259 # configuration can still be changed, the changes are just not going to be
260 # persistent over restarts. This option can be used to reduce code size by
261 # about 3.5 kB.
262 #CONFIG_NO_CONFIG_WRITE=y
263
264 # Remove support for configuration blobs to reduce code size by about 1.5 kB.
265 #CONFIG_NO_CONFIG_BLOBS=y
266
267 # Select program entry point implementation:
268 # main = UNIX/POSIX like main() function (default)
269 # main_winsvc = Windows service (read parameters from registry)
270 # main_none = Very basic example (development use only)
271 #CONFIG_MAIN=main
272
273 # Select wrapper for operatins system and C library specific functions
274 # unix = UNIX/POSIX like systems (default)
275 # win32 = Windows systems
276 # none = Empty template
277 #CONFIG_OS=unix
278
279 # Select event loop implementation
280 # eloop = select() loop (default)
281 # eloop_win = Windows events and WaitForMultipleObject() loop
282 # eloop_none = Empty template
283 #CONFIG_ELOOP=eloop
284
285 # Select layer 2 packet implementation
286 # linux = Linux packet socket (default)
287 # pcap = libpcap/libdnet/WinPcap
288 # freebsd = FreeBSD libpcap
289 # winpcap = WinPcap with receive thread
290 # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y)
291 # none = Empty template
292 #CONFIG_L2_PACKET=linux
293
294 # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
295 CONFIG_PEERKEY=y
296
297 # IEEE 802.11w (management frame protection)
298 # This version is an experimental implementation based on IEEE 802.11w/D1.0
299 # draft and is subject to change since the standard has not yet been finalized.
300 # Driver support is also needed for IEEE 802.11w.
301 CONFIG_IEEE80211W=y
302
303 # Select TLS implementation
304 # openssl = OpenSSL (default)
305 # gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA)
306 # internal = Internal TLSv1 implementation (experimental)
307 # none = Empty template
308 CONFIG_TLS=internal
309
310 # Whether to enable TLS/IA support, which is required for EAP-TTLSv1.
311 # You need CONFIG_TLS=gnutls for this to have any effect. Please note that
312 # even though the core GnuTLS library is released under LGPL, this extra
313 # library uses GPL and as such, the terms of GPL apply to the combination
314 # of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not
315 # apply for distribution of the resulting binary.
316 #CONFIG_GNUTLS_EXTRA=y
317
318 # If CONFIG_TLS=internal is used, additional library and include paths are
319 # needed for LibTomMath. Alternatively, an integrated, minimal version of
320 # LibTomMath can be used. See beginning of libtommath.c for details on benefits
321 # and drawbacks of this option.
322 CONFIG_INTERNAL_LIBTOMMATH=y
323 #ifndef CONFIG_INTERNAL_LIBTOMMATH
324 #LTM_PATH=/usr/src/libtommath-0.39
325 #CFLAGS += -I$(LTM_PATH)
326 #LIBS += -L$(LTM_PATH)
327 #LIBS_p += -L$(LTM_PATH)
328 #endif
329 # At the cost of about 4 kB of additional binary size, the internal LibTomMath
330 # can be configured to include faster routines for exptmod, sqr, and div to
331 # speed up DH and RSA calculation considerably
332 CONFIG_INTERNAL_LIBTOMMATH_FAST=y
333
334 # Include NDIS event processing through WMI into wpa_supplicant/wpasvc.
335 # This is only for Windows builds and requires WMI-related header files and
336 # WbemUuid.Lib from Platform SDK even when building with MinGW.
337 #CONFIG_NDIS_EVENTS_INTEGRATED=y
338 #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib"
339
340 # Add support for old DBus control interface
341 # (fi.epitest.hostap.WPASupplicant)
342 #CONFIG_CTRL_IFACE_DBUS=y
343
344 # Add support for new DBus control interface
345 # (fi.w1.hostap.wpa_supplicant1)
346 #CONFIG_CTRL_IFACE_DBUS_NEW=y
347
348 # Add introspection support for new DBus control interface
349 #CONFIG_CTRL_IFACE_DBUS_INTRO=y
350
351 # Add support for loading EAP methods dynamically as shared libraries.
352 # When this option is enabled, each EAP method can be either included
353 # statically (CONFIG_EAP_<method>=y) or dynamically (CONFIG_EAP_<method>=dyn).
354 # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to
355 # be loaded in the beginning of the wpa_supplicant configuration file
356 # (see load_dynamic_eap parameter in the example file) before being used in
357 # the network blocks.
358 #
359 # Note that some shared parts of EAP methods are included in the main program
360 # and in order to be able to use dynamic EAP methods using these parts, the
361 # main program must have been build with the EAP method enabled (=y or =dyn).
362 # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries
363 # unless at least one of them was included in the main build to force inclusion
364 # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included
365 # in the main build to be able to load these methods dynamically.
366 #
367 # Please also note that using dynamic libraries will increase the total binary
368 # size. Thus, it may not be the best option for targets that have limited
369 # amount of memory/flash.
370 #CONFIG_DYNAMIC_EAP_METHODS=y
371
372 # IEEE Std 802.11r-2008 (Fast BSS Transition)
373 CONFIG_IEEE80211R=y
374
375 # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt)
376 #CONFIG_DEBUG_FILE=y
377
378 # Enable privilege separation (see README 'Privilege separation' for details)
379 #CONFIG_PRIVSEP=y
380
381 # Enable mitigation against certain attacks against TKIP by delaying Michael
382 # MIC error reports by a random amount of time between 0 and 60 seconds
383 #CONFIG_DELAYED_MIC_ERROR_REPORT=y
384
385 # Enable tracing code for developer debugging
386 # This tracks use of memory allocations and other registrations and reports
387 # incorrect use with a backtrace of call (or allocation) location.
388 #CONFIG_WPA_TRACE=y
389 # For BSD, comment out these.
390 #LIBS += -lexecinfo
391 #LIBS_p += -lexecinfo
392 #LIBS_c += -lexecinfo
393
394 # Use libbfd to get more details for developer debugging
395 # This enables use of libbfd to get more detailed symbols for the backtraces
396 # generated by CONFIG_WPA_TRACE=y.
397 #CONFIG_WPA_TRACE_BFD=y
398 # For BSD, comment out these.
399 #LIBS += -lbfd -liberty -lz
400 #LIBS_p += -lbfd -liberty -lz
401 #LIBS_c += -lbfd -liberty -lz
402
403 CONFIG_NO_RANDOM_POOL=y
404 NEED_80211_COMMON=y
405
406 CONFIG_IBSS_RSN=y