target/linux/ath79/dts/qca9563_dlink_dir-859-a1.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         model = "D-Link DIR-859 A1";
  11         compatible = "dlink,dir-859-a1", "qca,qca9563";
  12
  13         aliases {
  14                 led-boot = &power;
  15                 led-failsafe = &power;
  16                 led-running = &power;
  17                 led-upgrade = &power;
  18         };
  19
  20         chosen {
  21                 bootargs = "console=ttyS0,115200n8";
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 wps {
  28                         label = "dir-859-a1:green:wps";
  29                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 power: power {
  33                         label = "dir-859-a1:green:power";
  34                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  35                 };
  36
  37                 internet {
  38                         label = "dir-859-a1:green:internet";
  39                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  40                 };
  41
  42                 wlan {
  43                         label = "dir-859-a1:green:wlan";
  44                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
  45                         linux,default-trigger = "phy0tpt";
  46                 };
  47         };
  48
  49         keys {
  50                 compatible = "gpio-keys-polled";
  51                 poll-interval = <20>;
  52
  53                 wps {
  54                         linux,code = <KEY_RESTART>;
  55                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  56                         debounce-interval = <60>;
  57                 };
  58
  59                 reset {
  60                         linux,code = <KEY_RESTART>;
  61                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  62                         debounce-interval = <60>;
  63                 };
  64         };
  65
  66         gpio-export {
  67                 compatible = "gpio-export";
  68                 #size-cells = <0>;
  69
  70                 gpio_switch_reset {
  71                         gpio-export,name = "dir-859-a1:reset:switch";
  72                         gpio-export,output = <1>;
  73                         gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;
  74                 };
  75         };
  76 };
  77
  78 &uart {
  79         status = "okay";
  80 };
  81
  82 &gpio {
  83         status = "okay";
  84 };
  85
  86 &pcie {
  87         status = "okay";
  88 };
  89
  90 &spi {
  91         num-cs = <1>;
  92
  93         status = "okay";
  94
  95         flash@0 {
  96                 compatible = "jedec,spi-nor";
  97                 reg = <0>;
  98                 spi-max-frequency = <30000000>;
  99
 100                 partitions {
 101                         compatible = "fixed-partitions";
 102                         #address-cells = <1>;
 103                         #size-cells = <1>;
 104
 105                         partition@0 {
 106                                 label = "bootloader";
 107                                 reg = <0x000000 0x40000>;
 108                                 read-only;
 109                         };
 110
 111                         partition@40000 {
 112                                 label = "bdcfg";
 113                                 reg = <0x040000 0x10000>;
 114                                 read-only;
 115                         };
 116
 117                         partition@50000 {
 118                                 label = "devdata";
 119                                 reg = <0x050000 0x10000>;
 120                                 read-only;
 121                         };
 122
 123                         partition@60000 {
 124                                 label = "devconf";
 125                                 reg = <0x060000 0x10000>;
 126                                 read-only;
 127                         };
 128
 129                         partition@70000 {
 130                                 compatible = "seama";
 131                                 label = "firmware";
 132                                 reg = <0x070000 0xf80000>;
 133                         };
 134
 135                         art: partition@ff0000 {
 136                                 label = "art";
 137                                 reg = <0xff0000 0x010000>;
 138                                 read-only;
 139                         };
 140                 };
 141         };
 142 };
 143
 144 &mdio0 {
 145         status = "okay";
 146
 147         phy-mask = <0>;
 148
 149         phy0: ethernet-phy@0 {
 150                 reg = <0>;
 151                 phy-mode = "sgmii";
 152
 153                 qca,ar8327-initvals = <
 154                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 155                         0x10 0x81000080 /* POWER_ON_STRIP */
 156                         0x50 0xcc35cc35 /* LED_CTRL0 */
 157                         0x54 0xcb37cb37 /* LED_CTRL1 */
 158                         0x58 0x00000000 /* LED_CTRL2 */
 159                         0x5c 0x00f3cf00 /* LED_CTRL3 */
 160                         0x7c 0x0000007e /* PORT0_STATUS */
 161                         >;
 162         };
 163 };
 164
 165 &eth0 {
 166         status = "okay";
 167
 168         pll-data = <0x03000101 0x00000101 0x00001919>;
 169
 170         phy-mode = "sgmii";
 171         phy-handle = <&phy0>;
 172 };
 173
 174 &wmac {
 175         status = "okay";
 176         qca,no-eeprom;
 177 };