target/linux/ath79/dts/qca9563_tplink_archer-c2-v3.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca956x.dtsi"
   8
   9 / {
  10         compatible = "tplink,archer-c2-v3", "qca,qca9563";
  11         model = "TP-Link Archer C2 Version 3";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &system;
  19                 led-failsafe = &system;
  20                 led-running = &system;
  21                 led-upgrade = &system;
  22         };
  23
  24         gpio_leds: leds {
  25                 compatible = "gpio-leds";
  26
  27                 system: system {
  28                         label = "tp-link:green:system";
  29                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  30                         default-state = "on";
  31                 };
  32
  33                 wifi2g {
  34                         label = "tp-link:green:wifi2g";
  35                         gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
  36                         linux,default-trigger = "phy1tpt";
  37                 };
  38
  39                 wifi5g {
  40                         label = "tp-link:green:wifi5g";
  41                         gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
  42                         linux,default-trigger = "phy0tpt";
  43                 };
  44
  45                 wifi_wps {
  46                         label = "tp-link:green:wps";
  47                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  48                 };
  49
  50                 wan {
  51                         label = "tp-link:green:wan";
  52                         gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
  53                 };
  54
  55                 wan_fail {
  56                         label = "tp-link:orange:wan";
  57                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 lan1 {
  61                         label = "tp-link:green:lan1";
  62                         gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
  63                 };
  64
  65                 lan2 {
  66                         label = "tp-link:green:lan2";
  67                         gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
  68                 };
  69
  70                 lan3 {
  71                         label = "tp-link:green:lan3";
  72                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  73                 };
  74
  75                 lan4 {
  76                         label = "tp-link:green:lan4";
  77                         gpios = <&gpio 21 GPIO_ACTIVE_LOW>;
  78                 };
  79         };
  80
  81         keys {
  82                 compatible = "gpio-keys";
  83
  84                 reset {
  85                         label = "Reset button";
  86                         linux,code = <KEY_RESTART>;
  87                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  88                         debounce-interval = <60>;
  89                 };
  90
  91                 wps {
  92                         label = "WPS button";
  93                         linux,code = <KEY_WPS_BUTTON>;
  94                         gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
  95                         debounce-interval = <60>;
  96                 };
  97         };
  98 };
  99
 100 &uart {
 101         status = "okay";
 102 };
 103
 104 &spi {
 105         status = "okay";
 106         num-cs = <1>;
 107
 108         flash@0 {
 109                 compatible = "jedec,spi-nor";
 110                 reg = <0>;
 111                 spi-max-frequency = <25000000>;
 112
 113                 partitions {
 114                         compatible = "fixed-partitions";
 115                         #address-cells = <1>;
 116                         #size-cells = <1>;
 117
 118                         partition@0 {
 119                                 label = "factory-uboot";
 120                                 reg = <0x000000 0x020000>;
 121                                 read-only;
 122                         };
 123
 124                         partition@20000 {
 125                                 label = "uboot";
 126                                 reg = <0x020000 0x10000>;
 127                         };
 128
 129                         partition@30000 {
 130                                 label = "firmware";
 131                                 reg = <0x030000 0x7A0000>;
 132                                 compatible = "denx,uimage";
 133                         };
 134
 135                         info: partition@7e0000 {
 136                                 label = "product-info";
 137                                 reg = <0x7e0000 0x010000>;
 138                                 read-only;
 139                         };
 140
 141                         art: partition@7f0000 {
 142                                 label = "ART";
 143                                 reg = <0x7f0000 0x010000>;
 144                                 read-only;
 145                         };
 146                 };
 147         };
 148 };
 149
 150 &gpio {
 151         status = "okay";
 152 };
 153
 154 &mdio0 {
 155         status = "okay";
 156
 157         phy-mask = <0>;
 158         phy0: ethernet-phy@0 {
 159                 reg = <0>;
 160                 phy-mode = "sgmii";
 161
 162                 qca,ar8327-initvals = <
 163                         0x04 0x00080080 /* PORT0 PAD MODE CTRL */
 164                         0x7c 0x0000007e /* PORT0_STATUS */
 165                 >;
 166         };
 167 };
 168
 169 &pcie {
 170         status = "okay";
 171 };
 172
 173 &eth0 {
 174         status = "okay";
 175
 176         mtd-mac-address = <&info 0x8>;
 177         phy-mode = "sgmii";
 178         phy-handle = <&phy0>;
 179 };
 180
 181 &wmac {
 182         status = "okay";
 183         mtd-cal-data = <&art 0x1000>;
 184         mtd-mac-address = <&info 0x8>;
 185 };