target/linux/bcm53xx/patches-4.4/046-0009-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch

   1 From 514647c9af870bd2df2e579134a26bff8d17b6b9 Mon Sep 17 00:00:00 2001
   2 From: Dan Haab <dhaab@luxul.com>
   3 Date: Sat, 14 Jan 2017 19:29:28 -0700
   4 Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
   5
   6 Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
   7 flash (for bootloader and NVRAM) and NAND flash (for firmware).
   8
   9 Signed-off-by: Dan Haab <dhaab@luxul.com>
  10 Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
  11 ---
  12  arch/arm/boot/dts/Makefile                    |   1 +
  13  arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
  14  2 files changed, 108 insertions(+)
  15  create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
  16
  17 --- a/arch/arm/boot/dts/Makefile
  18 +++ b/arch/arm/boot/dts/Makefile
  19 @@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  20         bcm47081-buffalo-wzr-600dhp2.dtb \
  21         bcm47081-buffalo-wzr-900dhp.dtb \
  22         bcm47081-luxul-xap-1410.dtb \
  23 +       bcm47081-luxul-xwr-1200.dtb \
  24         bcm4709-asus-rt-ac87u.dtb \
  25         bcm4709-buffalo-wxr-1900dhp.dtb \
  26         bcm4709-netgear-r7000.dtb \
  27 --- /dev/null
  28 +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
  29 @@ -0,0 +1,107 @@
  30 +/*
  31 + * Copyright 2017 Luxul Inc.
  32 + *
  33 + * Licensed under the ISC license.
  34 + */
  35 +
  36 +/dts-v1/;
  37 +
  38 +#include "bcm47081.dtsi"
  39 +#include "bcm5301x-nand-cs0-bch4.dtsi"
  40 +
  41 +/ {
  42 +       compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
  43 +       model = "Luxul XWR-1200 V1";
  44 +
  45 +       chosen {
  46 +               bootargs = "console=ttyS0,115200";
  47 +       };
  48 +
  49 +       memory {
  50 +               reg = <0x00000000 0x08000000>;
  51 +       };
  52 +
  53 +       leds {
  54 +               compatible = "gpio-leds";
  55 +
  56 +               power {
  57 +                       label = "bcm53xx:green:power";
  58 +                       gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  59 +                       linux,default-trigger = "default-on";
  60 +               };
  61 +
  62 +               lan3 {
  63 +                       label = "bcm53xx:green:lan3";
  64 +                       gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
  65 +                       linux,default-trigger = "none";
  66 +               };
  67 +
  68 +               lan4 {
  69 +                       label = "bcm53xx:green:lan4";
  70 +                       gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
  71 +                       linux,default-trigger = "none";
  72 +               };
  73 +
  74 +               wan {
  75 +                       label = "bcm53xx:green:wan";
  76 +                       gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
  77 +                       linux,default-trigger = "none";
  78 +               };
  79 +
  80 +               lan2 {
  81 +                       label = "bcm53xx:green:lan2";
  82 +                       gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
  83 +                       linux,default-trigger = "none";
  84 +               };
  85 +
  86 +               usb {
  87 +                       label = "bcm53xx:green:usb";
  88 +                       gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
  89 +                       linux,default-trigger = "none";
  90 +               };
  91 +
  92 +               status {
  93 +                       label = "bcm53xx:green:status";
  94 +                       gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
  95 +                       linux,default-trigger = "timer";
  96 +               };
  97 +
  98 +               2ghz {
  99 +                       label = "bcm53xx:green:2ghz";
 100 +                       gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
 101 +                       linux,default-trigger = "none";
 102 +               };
 103 +
 104 +               5ghz {
 105 +                       label = "bcm53xx:green:5ghz";
 106 +                       gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 107 +                       linux,default-trigger = "none";
 108 +               };
 109 +
 110 +               lan1 {
 111 +                       label = "bcm53xx:green:lan1";
 112 +                       gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 113 +                       linux,default-trigger = "none";
 114 +               };
 115 +       };
 116 +
 117 +       gpio-keys {
 118 +               compatible = "gpio-keys";
 119 +               #address-cells = <1>;
 120 +               #size-cells = <0>;
 121 +
 122 +               restart {
 123 +                       label = "Reset";
 124 +                       linux,code = <KEY_RESTART>;
 125 +                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 126 +               };
 127 +       };
 128 +};
 129 +
 130 +&usb2 {
 131 +       vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 132 +};
 133 +
 134 +&spi_nor {
 135 +       status = "okay";
 136 +};