target/linux/bcm53xx/patches-4.4/130-0003-ARM-BCM5301X-Add-DT-for-Luxul-XWR-1200.patch

   1 From: Dan Haab <dhaab@luxul.com>
   2 Subject: [PATCH] ARM: BCM5301X: Add DT for Luxul XWR-1200
   3
   4 Luxul XWR-1200 in a dual-band router based on BCM47081. It uses serial
   5 flash (for bootloader and NVRAM) and NAND flash (for firmware).
   6
   7 Signed-off-by: Dan Haab <dhaab@luxul.com>
   8 ---
   9  arch/arm/boot/dts/Makefile                    |   1 +
  10  arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts | 107 ++++++++++++++++++++++++++
  11  2 files changed, 108 insertions(+)
  12  create mode 100644 arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
  13
  14 --- a/arch/arm/boot/dts/Makefile
  15 +++ b/arch/arm/boot/dts/Makefile
  16 @@ -74,6 +74,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
  17         bcm47081-buffalo-wzr-600dhp2.dtb \
  18         bcm47081-buffalo-wzr-900dhp.dtb \
  19         bcm47081-luxul-xap-1410.dtb \
  20 +       bcm47081-luxul-xwr-1200.dtb \
  21         bcm4709-asus-rt-ac87u.dtb \
  22         bcm4709-buffalo-wxr-1900dhp.dtb \
  23         bcm4709-netgear-r7000.dtb \
  24 --- /dev/null
  25 +++ b/arch/arm/boot/dts/bcm47081-luxul-xwr-1200.dts
  26 @@ -0,0 +1,107 @@
  27 +/*
  28 + * Copyright 2017 Luxul Inc.
  29 + *
  30 + * Licensed under the ISC license.
  31 + */
  32 +
  33 +/dts-v1/;
  34 +
  35 +#include "bcm47081.dtsi"
  36 +#include "bcm5301x-nand-cs0-bch4.dtsi"
  37 +
  38 +/ {
  39 +       compatible = "luxul,xwr-1200v1", "brcm,bcm47081", "brcm,bcm4708";
  40 +       model = "Luxul XWR-1200 V1";
  41 +
  42 +       chosen {
  43 +               bootargs = "console=ttyS0,115200";
  44 +       };
  45 +
  46 +       memory {
  47 +               reg = <0x00000000 0x08000000>;
  48 +       };
  49 +
  50 +       leds {
  51 +               compatible = "gpio-leds";
  52 +
  53 +               power {
  54 +                       label = "bcm53xx:green:power";
  55 +                       gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
  56 +                       linux,default-trigger = "default-on";
  57 +               };
  58 +
  59 +               lan3 {
  60 +                       label = "bcm53xx:green:lan3";
  61 +                       gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
  62 +                       linux,default-trigger = "none";
  63 +               };
  64 +
  65 +               lan4 {
  66 +                       label = "bcm53xx:green:lan4";
  67 +                       gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
  68 +                       linux,default-trigger = "none";
  69 +               };
  70 +
  71 +               wan {
  72 +                       label = "bcm53xx:green:wan";
  73 +                       gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
  74 +                       linux,default-trigger = "none";
  75 +               };
  76 +
  77 +               lan2 {
  78 +                       label = "bcm53xx:green:lan2";
  79 +                       gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
  80 +                       linux,default-trigger = "none";
  81 +               };
  82 +
  83 +               usb {
  84 +                       label = "bcm53xx:green:usb";
  85 +                       gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
  86 +                       linux,default-trigger = "none";
  87 +               };
  88 +
  89 +               status {
  90 +                       label = "bcm53xx:green:status";
  91 +                       gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
  92 +                       linux,default-trigger = "timer";
  93 +               };
  94 +
  95 +               2ghz {
  96 +                       label = "bcm53xx:green:2ghz";
  97 +                       gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
  98 +                       linux,default-trigger = "none";
  99 +               };
 100 +
 101 +               5ghz {
 102 +                       label = "bcm53xx:green:5ghz";
 103 +                       gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
 104 +                       linux,default-trigger = "none";
 105 +               };
 106 +
 107 +               lan1 {
 108 +                       label = "bcm53xx:green:lan1";
 109 +                       gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
 110 +                       linux,default-trigger = "none";
 111 +               };
 112 +       };
 113 +
 114 +       gpio-keys {
 115 +               compatible = "gpio-keys";
 116 +               #address-cells = <1>;
 117 +               #size-cells = <0>;
 118 +
 119 +               restart {
 120 +                       label = "Reset";
 121 +                       linux,code = <KEY_RESTART>;
 122 +                       gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
 123 +               };
 124 +       };
 125 +};
 126 +
 127 +&usb2 {
 128 +       vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
 129 +};
 130 +
 131 +&spi_nor {
 132 +       status = "okay";
 133 +};