target/linux/ipq806x/files-4.14/arch/arm/boot/dts/qcom-ipq8064-wxr-2533dhp.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 #include "qcom-ipq8064-v2.0.dtsi"
   3
   4 #include <dt-bindings/input/input.h>
   5
   6 / {
   7         model = "Buffalo WXR-2533DHP";
   8         compatible = "buffalo,wxr-2533dhp", "qcom,ipq8064";
   9
  10         memory@42000000 {
  11                 reg = <0x42000000 0x1e000000>;
  12                 device_type = "memory";
  13         };
  14
  15         reserved-memory {
  16                 #address-cells = <1>;
  17                 #size-cells = <1>;
  18                 ranges;
  19                 rsvd@41200000 {
  20                         reg = <0x41200000 0x300000>;
  21                         no-map;
  22                 };
  23         };
  24
  25         aliases {
  26                 serial0 = &gsbi4_serial;
  27
  28                 led-boot = &power;
  29                 led-failsafe = &diag;
  30                 led-running = &power;
  31                 led-upgrade = &power;
  32         };
  33
  34         chosen {
  35                 /* use "ubi_rootfs" volume in "ubi" partition as rootfs */
  36                 bootargs = "ubi.block=0,1 root=/dev/ubiblock0_1 rootfstype=squashfs";
  37                 stdout-path = "serial0:115200n8";
  38         };
  39
  40         soc {
  41                 nand@1ac00000 {
  42                         status = "okay";
  43
  44                         pinctrl-0 = <&nand_pins>;
  45                         pinctrl-names = "default";
  46
  47                         cs@0 {
  48                                 reg = <0>;
  49                                 compatible = "qcom,nandcs";
  50
  51                                 nand-ecc-strength = <4>;
  52                                 nand-bus-width = <8>;
  53                                 nand-ecc-step-size = <512>;
  54
  55                                 partitions {
  56                                         compatible = "fixed-partitions";
  57                                         #address-cells = <1>;
  58                                         #size-cells = <1>;
  59
  60                                         ubi@0 {
  61                                                 label = "ubi";
  62                                                 reg = <0x0000000 0x4000000>;
  63                                         };
  64
  65                                         rootfs_1@4000000 {
  66                                                 label = "rootfs_1";
  67                                                 reg = <0x4000000 0x4000000>;
  68                                         };
  69                                 };
  70                         };
  71                 };
  72
  73                 mdio {
  74                         compatible = "virtual,mdio-gpio";
  75                         #address-cells = <1>;
  76                         #size-cells = <0>;
  77                         gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
  78                                 <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
  79                         pinctrl-0 = <&mdio0_pins>;
  80                         pinctrl-names = "default";
  81
  82                         ethernet-phy@0 {
  83                                 reg = <0>;
  84                                 qca,ar8327-initvals = <
  85                                         0x00004 0x07600000  /* PAD0_MODE */
  86                                         0x00008 0x01000000  /* PAD5_MODE */
  87                                         0x0000c 0x00000080  /* PAD6_MODE */
  88                                         0x00050 0xcc35cc35  /* LED_CTRL0 */
  89                                         0x00054 0xca35ca35  /* LED_CTRL1 */
  90                                         0x00058 0xc935c935  /* LED_CTRL2 */
  91                                         0x0005c 0x03ffff00  /* LED_CTRL3 */
  92                                         0x000e4 0x0006a545  /* MAC_POWER_SEL */
  93                                         0x000e0 0xc74164de  /* SGMII_CTRL */
  94                                         0x0007c 0x0000007e  /* PORT0_STATUS */
  95                                         0x00094 0x0000007e  /* PORT6_STATUS */
  96                                         >;
  97                         };
  98
  99                         ethernet-phy@4 {
 100                                 reg = <4>;
 101                         };
 102                 };
 103         };
 104
 105         leds {
 106                 compatible = "gpio-leds";
 107                 pinctrl-0 = <&led_pins>;
 108                 pinctrl-names = "default";
 109
 110                 usb {
 111                         label = "wxr-2533dhp:green:usb";
 112                         gpios = <&qcom_pinmux 7 GPIO_ACTIVE_HIGH>;
 113                         linux,default-trigger = "usbport";
 114                         trigger-sources = <&hub_port0 &hub_port1>;
 115                 };
 116
 117                 guestport {
 118                         label = "wxr-2533dhp:green:guestport";
 119                         gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
 120                 };
 121
 122                 diag: diag {
 123                         label = "wxr-2533dhp:orange:diag";
 124                         gpios = <&qcom_pinmux 9 GPIO_ACTIVE_HIGH>;
 125                 };
 126
 127                 internet_orange {
 128                         label = "wxr-2533dhp:orange:internet";
 129                         gpios = <&qcom_pinmux 16 GPIO_ACTIVE_HIGH>;
 130                 };
 131
 132                 internet_white {
 133                         label = "wxr-2533dhp:white:internet";
 134                         gpios = <&qcom_pinmux 22 GPIO_ACTIVE_HIGH>;
 135                 };
 136
 137                 wireless_orange {
 138                         label = "wxr-2533dhp:orange:wireless";
 139                         gpios = <&qcom_pinmux 23 GPIO_ACTIVE_HIGH>;
 140                 };
 141
 142                 wireless_white {
 143                         label = "wxr-2533dhp:white:wireless";
 144                         gpios = <&qcom_pinmux 24 GPIO_ACTIVE_HIGH>;
 145                 };
 146
 147                 router_orange {
 148                         label = "wxr-2533dhp:orange:router";
 149                         gpios = <&qcom_pinmux 25 GPIO_ACTIVE_HIGH>;
 150                 };
 151
 152                 router_white {
 153                         label = "wxr-2533dhp:white:router";
 154                         gpios = <&qcom_pinmux 26 GPIO_ACTIVE_LOW>;
 155                 };
 156
 157                 power: power {
 158                         label = "wxr-2533dhp:white:power";
 159                         gpios = <&qcom_pinmux 53 GPIO_ACTIVE_HIGH>;
 160                 };
 161         };
 162
 163         keys {
 164                 compatible = "gpio-keys";
 165                 pinctrl-0 = <&button_pins>;
 166                 pinctrl-names = "default";
 167
 168                 power {
 169                         label = "power";
 170                         gpios = <&qcom_pinmux 58 GPIO_ACTIVE_LOW>;
 171                         linux,code = <KEY_POWER>;
 172                 };
 173
 174                 reset {
 175                         label = "reset";
 176                         gpios = <&qcom_pinmux 54 GPIO_ACTIVE_LOW>;
 177                         linux,code = <KEY_RESTART>;
 178                 };
 179
 180                 wps {
 181                         label = "wps";
 182                         gpios = <&qcom_pinmux 65 GPIO_ACTIVE_LOW>;
 183                         linux,code = <KEY_WPS_BUTTON>;
 184                 };
 185
 186                 eject {
 187                         label = "eject";
 188                         gpios = <&qcom_pinmux 6 GPIO_ACTIVE_LOW>;
 189                         linux,code = <KEY_EJECTCD>;
 190                 };
 191
 192                 guest {
 193                         label = "guest";
 194                         gpios = <&qcom_pinmux 64 GPIO_ACTIVE_LOW>;
 195                         linux,code = <BTN_0>;
 196                 };
 197
 198                 ap {
 199                         label = "ap";
 200                         gpios = <&qcom_pinmux 55 GPIO_ACTIVE_LOW>;
 201                         linux,code = <BTN_1>;
 202                         linux,input-type = <EV_SW>;
 203                 };
 204
 205                 router {
 206                         label = "router";
 207                         gpios = <&qcom_pinmux 56 GPIO_ACTIVE_LOW>;
 208                         linux,code = <BTN_1>;
 209                         linux,input-type = <EV_SW>;
 210                 };
 211
 212                 auto {
 213                         label = "auto";
 214                         gpios = <&qcom_pinmux 57 GPIO_ACTIVE_LOW>;
 215                         linux,code = <BTN_1>;
 216                         linux,input-type = <EV_SW>;
 217                 };
 218         };
 219 };
 220
 221 &adm_dma {
 222         status = "okay";
 223 };
 224
 225 &gmac1 {
 226         status = "okay";
 227
 228         phy-mode = "rgmii";
 229         qcom,id = <1>;
 230
 231         pinctrl-0 = <&rgmii2_pins>;
 232         pinctrl-names = "default";
 233
 234         mtd-mac-address = <&ART 6>;
 235
 236         fixed-link {
 237                 speed = <1000>;
 238                 full-duplex;
 239         };
 240 };
 241
 242 &gmac2 {
 243         status = "ok";
 244
 245         phy-mode = "sgmii";
 246         qcom,id = <2>;
 247
 248         mtd-mac-address = <&ART 0>;
 249
 250         fixed-link {
 251                 speed = <1000>;
 252                 full-duplex;
 253         };
 254 };
 255
 256 &gsbi4 {
 257         status = "okay";
 258         qcom,mode = <GSBI_PROT_I2C_UART>;
 259 };
 260
 261 &gsbi4_serial {
 262         status = "okay";
 263
 264         pinctrl-0 = <&uart0_pins>;
 265         pinctrl-names = "default";
 266 };
 267
 268 &gsbi5 {
 269         status = "okay";
 270         qcom,mode = <GSBI_PROT_SPI>;
 271
 272         spi@1a280000 {
 273                 status = "okay";
 274
 275                 pinctrl-0 = <&spi_pins>;
 276                 pinctrl-names = "default";
 277
 278                 cs-gpios = <&qcom_pinmux 20 GPIO_ACTIVE_HIGH>;
 279
 280                 flash@0 {
 281                         compatible = "jedec,spi-nor";
 282                         spi-max-frequency = <50000000>;
 283                         reg = <0>;
 284
 285                         partitions {
 286                                 compatible = "fixed-partitions";
 287                                 #address-cells = <1>;
 288                                 #size-cells = <1>;
 289
 290                                 SBL1@0 {
 291                                         label = "SBL1";
 292                                         reg = <0x0 0x10000>;
 293                                         read-only;
 294                                 };
 295
 296                                 MIBIB@10000 {
 297                                         label = "MIBIB";
 298                                         reg = <0x10000 0x20000>;
 299                                         read-only;
 300                                 };
 301
 302                                 SBL2@30000 {
 303                                         label = "SBL2";
 304                                         reg = <0x30000 0x30000>;
 305                                         read-only;
 306                                 };
 307
 308                                 SBL3@60000 {
 309                                         label = "SBL3";
 310                                         reg = <0x60000 0x30000>;
 311                                         read-only;
 312                                 };
 313
 314                                 DDRCONFIG@90000 {
 315                                         label = "DDRCONFIG";
 316                                         reg = <0x90000 0x10000>;
 317                                         read-only;
 318                                 };
 319
 320                                 SSD@a0000 {
 321                                         label = "SSD";
 322                                         reg = <0xa0000 0x10000>;
 323                                         read-only;
 324                                 };
 325
 326                                 TZ@b0000 {
 327                                         label = "TZ";
 328                                         reg = <0xb0000 0x30000>;
 329                                         read-only;
 330                                 };
 331
 332                                 RPM@e0000 {
 333                                         label = "RPM";
 334                                         reg = <0xe0000 0x20000>;
 335                                         read-only;
 336                                 };
 337
 338                                 APPSBL@100000 {
 339                                         label = "APPSBL";
 340                                         reg = <0x100000 0x70000>;
 341                                         read-only;
 342                                 };
 343
 344                                 APPSBLENV@170000 {
 345                                         label = "APPSBLENV";
 346                                         reg = <0x170000 0x10000>;
 347                                         read-only;
 348                                 };
 349
 350                                 ART: ART@180000 {
 351                                         label = "ART";
 352                                         reg = <0x180000 0x40000>;
 353                                         read-only;
 354                                 };
 355
 356                                 BOOTCONFIG@1c0000 {
 357                                         label = "BOOTCONFIG";
 358                                         reg = <0x1c0000 0x10000>;
 359                                         read-only;
 360                                 };
 361
 362                                 APPSBL_1@1d0000 {
 363                                         label = "APPSBL_1";
 364                                         reg = <0x1d0000 0x70000>;
 365                                         read-only;
 366                                 };
 367                         };
 368                 };
 369         };
 370 };
 371
 372 &hs_phy_0 {             /* USB3 port 0 HS phy */
 373         status = "okay";
 374 };
 375
 376 &ss_phy_0 {             /* USB3 port 0 SS phy */
 377         status = "okay";
 378 };
 379
 380 &hs_phy_1 {             /* USB3 port 1 HS phy */
 381         status = "okay";
 382 };
 383
 384 &ss_phy_1 {             /* USB3 port 1 SS phy */
 385         status = "okay";
 386 };
 387
 388 &usb3_0 {
 389         status = "okay";
 390
 391         pinctrl-0 = <&usb_pwr_en_pins>;
 392         pinctrl-names = "default";
 393 };
 394
 395 &usb3_1 {
 396         status = "okay";
 397 };
 398
 399 &dwc3_0 {
 400         #address-cells = <1>;
 401         #size-cells = <0>;
 402
 403         hub_port0: port@1 {
 404                 reg = <1>;
 405                 #trigger-source-cells = <0>;
 406         };
 407 };
 408
 409 &dwc3_1 {
 410         #address-cells = <1>;
 411         #size-cells = <0>;
 412
 413         hub_port1: port@1 {
 414                 reg = <1>;
 415                 #trigger-source-cells = <0>;
 416         };
 417 };
 418
 419 &pcie0 {
 420         status = "okay";
 421 };
 422
 423 &pcie1 {
 424         status = "okay";
 425         force_gen1 = <1>;
 426 };
 427
 428 &qcom_pinmux {
 429         button_pins: button_pins {
 430                 mux {
 431                         pins = "gpio6", "gpio54", "gpio55", "gpio56", "gpio57",
 432                                 "gpio58", "gpio64", "gpio65";
 433                         function = "gpio";
 434                         drive-strength = <2>;
 435                         bias-pull-up;
 436                 };
 437         };
 438
 439         led_pins: led_pins {
 440                 mux {
 441                         pins = "gpio7", "gpio8", "gpio9", "gpio16", "gpio22",
 442                                 "gpio23", "gpio24", "gpio25", "gpio26", "gpio53";
 443                         function = "gpio";
 444                         drive-strength = <2>;
 445                         bias-pull-up;
 446                 };
 447         };
 448
 449         uart0_pins: uart0_pins {
 450                 mux {
 451                         pins = "gpio10", "gpio11";
 452                         function = "gsbi4";
 453                         drive-strength = <12>;
 454                         bias-disable;
 455                 };
 456         };
 457
 458         spi_pins: spi_pins {
 459                 mux {
 460                         pins = "gpio18", "gpio19", "gpio21";
 461                         function = "gsbi5";
 462                         bias-pull-down;
 463                 };
 464
 465                 data {
 466                         pins = "gpio18", "gpio19";
 467                         drive-strength = <10>;
 468                 };
 469
 470                 cs{
 471                         pins = "gpio20";
 472                         drive-strength = <10>;
 473                         bias-pull-up;
 474                 };
 475
 476                 clk {
 477                         pins = "gpio21";
 478                         drive-strength = <12>;
 479                 };
 480         };
 481
 482         mdio0_pins: mdio0_pins {
 483                 mux {
 484                         pins = "gpio0", "gpio1";
 485                         function = "gpio";
 486                         drive-strength = <8>;
 487                         bias-disable;
 488                 };
 489         };
 490
 491         nand_pins: nand_pins {
 492                 mux {
 493                         pins = "gpio34", "gpio35", "gpio36",
 494                                "gpio37", "gpio38", "gpio39",
 495                                "gpio40", "gpio41", "gpio42",
 496                                "gpio43", "gpio44", "gpio45",
 497                                "gpio46", "gpio47";
 498                         function = "nand";
 499                         drive-strength = <10>;
 500                         bias-disable;
 501                 };
 502
 503                 pullups {
 504                         pins = "gpio39";
 505                         bias-pull-up;
 506                 };
 507
 508                 hold {
 509                         pins = "gpio40", "gpio41", "gpio42",
 510                                "gpio43", "gpio44", "gpio45",
 511                                "gpio46", "gpio47";
 512                         bias-bus-hold;
 513                 };
 514         };
 515
 516         rgmii2_pins: rgmii2_pins {
 517                 mux {
 518                         pins = "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
 519                                "gpio51", "gpio52", "gpio59", "gpio60", "gpio61", "gpio62" ;
 520                         function = "rgmii2";
 521                         drive-strength = <8>;
 522                         bias-disable;
 523                 };
 524         };
 525
 526         usb_pwr_en_pins: usb_pwr_en_pins {
 527                 mux{
 528                         pins = "gpio68";
 529                         function = "gpio";
 530                         drive-strength = <2>;
 531                         bias-pull-up;
 532                         output-high;
 533                 };
 534         };
 535 };