target/linux/ramips/dts/ASL26555-8M.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "ASL26555", "ralink,rt3050-soc";
   7         model = "Alpha ASL26555";
   8
   9         gpio-keys-polled {
  10                 compatible = "gpio-keys-polled";
  11                 #address-cells = <1>;
  12                 #size-cells = <0>;
  13                 poll-interval = <20>;
  14
  15                 reset {
  16                         label = "reset";
  17                         gpios = <&gpio0 10 0>;
  18                         linux,code = <0x198>;
  19                 };
  20
  21                 wps {
  22                         label = "wps";
  23                         gpios = <&gpio0 12 0>;
  24                         linux,code = <0x211>;
  25                 };
  26         };
  27
  28         gpio-leds {
  29                 compatible = "gpio-leds";
  30
  31                 eth {
  32                         label = "asl26555:green:eth";
  33                         gpios = <&gpio0 0 1>;
  34                 };
  35
  36                 wan-red {
  37                         label = "asl26555:red:wan";
  38                         gpios = <&gpio0 1 0>;
  39                 };
  40
  41                 wan-green {
  42                         label = "asl26555:green:wan";
  43                         gpios = <&gpio0 2 0>;
  44                 };
  45
  46                 wlan {
  47                         label = "asl26555:green:wlan";
  48                         gpios = <&gpio0 7 0>;
  49                 };
  50
  51                 power-green {
  52                         label = "asl26555:green:power";
  53                         gpios = <&gpio0 8 0>;
  54                 };
  55
  56                 power-red {
  57                         label = "asl26555:red:power";
  58                         gpios = <&gpio0 9 0>;
  59                 };
  60
  61                 3g-green {
  62                         label = "asl26555:green:3g";
  63                         gpios = <&gpio0 14 1>;
  64                 };
  65
  66                 3g-red {
  67                         label = "asl26555:red:3g";
  68                         gpios = <&gpio0 17 1>;
  69                 };
  70         };
  71 };
  72
  73 &gpio0 {
  74         status = "okay";
  75 };
  76
  77 &spi0 {
  78         status = "okay";
  79
  80         m25p80@0 {
  81                 #address-cells = <1>;
  82                 #size-cells = <1>;
  83                 compatible = "jedec,spi-nor";
  84                 reg = <0 0>;
  85                 linux,modalias = "m25p80", "s25sl064p";
  86                 spi-max-frequency = <10000000>;
  87
  88                 partition@0 {
  89                         label = "uboot";
  90                         reg = <0x0 0x30000>;
  91                         read-only;
  92                 };
  93
  94                 ubootenv: partition@30000 {
  95                         label = "uboot-env";
  96                         reg = <0x30000 0x10000>;
  97                         read-only;
  98                 };
  99
 100                 partition@40000 {
 101                         label = "rgdb";
 102                         reg = <0x40000 0x10000>;
 103                         read-only;
 104                 };
 105
 106                 partition@50000 {
 107                         label = "firmware";
 108                         reg = <0x50000 0x790000>;
 109                 };
 110
 111                 partition@7e0000 {
 112                         label = "cert";
 113                         reg = <0x7e0000 0x10000>;
 114                         read-only;
 115                 };
 116
 117                 partition@7f0000 {
 118                         label = "langpack";
 119                         reg = <0x7f0000 0x10000>;
 120                         read-only;
 121                 };
 122         };
 123 };
 124
 125 &pinctrl {
 126         state_default: pinctrl0 {
 127                 gpio {
 128                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
 129                         ralink,function = "gpio";
 130                 };
 131         };
 132 };
 133
 134 &ethernet {
 135         mtd-mac-address = <&ubootenv 0x4004>;
 136 };
 137
 138 &esw {
 139         mediatek,portmap = <0x1e>;
 140 };
 141
 142 &wmac {
 143         ralink,mtd-eeprom = <&ubootenv 0x4000>;
 144 };
 145
 146 &otg {
 147         status = "okay";
 148 };