target/linux/ramips/dts/RT-N13U.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 / {
   6         compatible = "RT-N13U", "ralink,rt3052-soc";
   7         model = "Asus RT-N13U";
   8
   9         cfi@1f000000 {
  10                 compatible = "cfi-flash";
  11                 reg = <0x1f000000 0x800000>;
  12                 bank-width = <2>;
  13                 device-width = <2>;
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16
  17                 partition@0 {
  18                         label = "u-boot";
  19                         reg = <0x0 0x30000>;
  20                         read-only;
  21                 };
  22
  23                 partition@30000 {
  24                         label = "u-boot-env";
  25                         reg = <0x30000 0x10000>;
  26                         read-only;
  27                 };
  28
  29                 factory: partition@40000 {
  30                         label = "factory";
  31                         reg = <0x40000 0x10000>;
  32                         read-only;
  33                 };
  34
  35                 partition@50000 {
  36                         label = "firmware";
  37                         reg = <0x50000 0x7b0000>;
  38                 };
  39         };
  40
  41         gpio-leds {
  42                 compatible = "gpio-leds";
  43
  44                 power {
  45                         label = "rt-n13u:blue:power";
  46                         gpios = <&gpio0 7 1>;
  47                 };
  48
  49                 wifi {
  50                         label = "rt-n13u:blue:wifi";
  51                         gpios = <&gpio0 8 1>;
  52                 };
  53         };
  54
  55         gpio-keys-polled {
  56                 compatible = "gpio-keys-polled";
  57                 #address-cells = <1>;
  58                 #size-cells = <0>;
  59                 poll-interval = <10>;
  60
  61                 reset {
  62                         label = "reset";
  63                         gpios = <&gpio0 10 1>;
  64                         linux,code = <0x198>;
  65                 };
  66
  67                 wps {
  68                         label = "wps";
  69                         gpios = <&gpio0 0 1>;
  70                         linux,code = <0x211>;
  71                 };
  72         };
  73 };
  74
  75 &pinctrl {
  76         state_default: pinctrl0 {
  77                 gpio {
  78                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
  79                         ralink,function = "gpio";
  80                 };
  81         };
  82 };
  83
  84 &ethernet {
  85         mtd-mac-address = <&factory 0x28>;
  86 };
  87
  88 &esw {
  89         mediatek,portmap = <0x2f>;
  90 };
  91
  92 &wmac {
  93         ralink,mtd-eeprom = <&factory 0>;
  94 };
  95
  96 &otg {
  97         status = "okay";
  98 };