target/linux/ramips/dts/SAP-G3200U3.dts

   1 /dts-v1/;
   2
   3 #include "mt7621.dtsi"
   4
   5 / {
   6         compatible = "mediatek,mt7621-eval-board", "mediatek,mt7621-soc";
   7         model = "STORYLiNK SAP-G3200U3";
   8
   9         memory@0 {
  10                 device_type = "memory";
  11                 reg = <0x0 0x8000000>;
  12         };
  13
  14         chosen {
  15                 bootargs = "console=ttyS0,57600";
  16         };
  17
  18         gpio-leds {
  19                 compatible = "gpio-leds";
  20
  21                 usb {
  22                         label = "sap-g3200u3:green:usb";
  23                         gpios = <&gpio0 13 1>;
  24                 };
  25         };
  26
  27         gpio-keys-polled {
  28                 compatible = "gpio-keys-polled";
  29                 #address-cells = <1>;
  30                 #size-cells = <0>;
  31                 poll-interval = <20>;
  32
  33                 reset {
  34                         label = "reset";
  35                         gpios = <&gpio0 16 1>;
  36                         linux,code = <0x198>;
  37                 };
  38
  39                 rfkill {
  40                         label = "rfkill";
  41                         gpios = <&gpio0 14 1>;
  42                         linux,code = <0xf7>;
  43                 };
  44         };
  45 };
  46
  47 &spi0 {
  48         status = "okay";
  49
  50         m25p80@0 {
  51                 #address-cells = <1>;
  52                 #size-cells = <1>;
  53                 compatible = "jedec,spi-nor";
  54                 reg = <0 0>;
  55                 linux,modalias = "m25p80", "en25q64";
  56                 spi-max-frequency = <10000000>;
  57
  58                 partition@0 {
  59                         label = "u-boot";
  60                         reg = <0x0 0x30000>;
  61                         read-only;
  62                 };
  63
  64                 partition@30000 {
  65                         label = "u-boot-env";
  66                         reg = <0x30000 0x1000>;
  67                         read-only;
  68                 };
  69
  70                 partition@31000 {
  71                         label = "config";
  72                         reg = <0x31000 0xf000>;
  73                         read-only;
  74                 };
  75
  76                 factory: partition@40000 {
  77                         label = "factory";
  78                         reg = <0x40000 0x10000>;
  79                         read-only;
  80                 };
  81
  82                 partition@50000 {
  83                         label = "firmware";
  84                         reg = <0x50000 0x7b0000>;
  85                 };
  86         };
  87 };
  88
  89 &pcie {
  90         status = "okay";
  91
  92         pcie0 {
  93                 mt76@0,0 {
  94                         reg = <0x0000 0 0 0 0>;
  95                         device_type = "pci";
  96                         mediatek,mtd-eeprom = <&factory 0x8000>;
  97                         mediatek,2ghz = <0>;
  98                 };
  99         };
 100
 101         pcie1 {
 102                 mt76@1,0 {
 103                         reg = <0x0000 0 0 0 0>;
 104                         device_type = "pci";
 105                         mediatek,mtd-eeprom = <&factory 0x0000>;
 106                         mediatek,5ghz = <0>;
 107                 };
 108         };
 109 };
 110
 111 &ethernet {
 112         mtd-mac-address = <&factory 0xe006>;
 113 };
 114
 115 &pinctrl {
 116         state_default: pinctrl0 {
 117                 gpio {
 118                         ralink,group = "uart3", "jtag";
 119                         ralink,function = "gpio";
 120                 };
 121         };
 122 };