target/linux/ramips/dts/VOCORE2.dts

   1 /dts-v1/;
   2
   3 #include "mt7628an.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "vocore,VoCore2", "mediatek,mt7628an-soc";
  10         model = "VoCore2";
  11
  12         chosen {
  13                 bootargs = "console=ttyS2,115200";
  14         };
  15
  16         memory@0 {
  17                 device_type = "memory";
  18                 reg = <0x0 0x4000000>;
  19         };
  20
  21         gpio-leds {
  22                 compatible = "gpio-leds";
  23
  24                 status {
  25                         label = "vocore2:fuchsia:status";
  26                         gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
  27                 };
  28         };
  29 };
  30
  31 &pinctrl {
  32         state_default: pinctrl0 {
  33                 gpio {
  34                         ralink,group = "refclk", "gpio";
  35                         ralink,function = "gpio";
  36                 };
  37
  38                 agpio {
  39                         ralink,group = "agpio";
  40                         ralink,function = "uart2";
  41                 };
  42         };
  43
  44         uart1_pins: uart1 {
  45                 uart1 {
  46                         ralink,group = "uart1";
  47                         ralink,function = "uart1";
  48                 };
  49         };
  50
  51         uart2_pins: uart2 {
  52                 uart2 {
  53                         ralink,group = "spis";
  54                         ralink,function = "pwm";
  55                 };
  56         };
  57 };
  58
  59 &wmac {
  60         status = "okay";
  61         ralink,mtd-eeprom = <&factory 0x4>;
  62 };
  63
  64 &spi0 {
  65         status = "okay";
  66
  67         m25p80@0 {
  68                 #address-cells = <1>;
  69                 #size-cells = <1>;
  70                 compatible = "jedec,spi-nor";
  71                 reg = <0>;
  72                 spi-max-frequency = <10000000>;
  73                 m25p,chunked-io = <32>;
  74
  75                 partition@0 {
  76                         label = "u-boot";
  77                         reg = <0x0 0x30000>;
  78                         read-only;
  79                 };
  80
  81                 partition@30000 {
  82                         label = "u-boot-env";
  83                         reg = <0x30000 0x10000>;
  84                         read-only;
  85                 };
  86
  87                 factory: partition@40000 {
  88                         label = "factory";
  89                         reg = <0x40000 0x10000>;
  90                         read-only;
  91                 };
  92
  93                 partition@50000 {
  94                         label = "firmware";
  95                         reg = <0x50000 0xfb0000>;
  96                 };
  97         };
  98 };
  99
 100 &esw {
 101         mediatek,portmap = <0x7>;
 102         mediatek,portdisable = <0x3a>;
 103 };
 104
 105 &i2s {
 106         status = "okay";
 107 };
 108
 109 &gdma {
 110         status = "okay";
 111 };
 112
 113 &pwm {
 114         status = "okay";
 115 };
 116
 117 &uart1 {
 118         status = "okay";
 119 };
 120
 121 &uart2 {
 122         status = "okay";
 123 };