target/linux/ramips/dts/WRTNODE2.dtsi

   1 #include "mt7628an.dtsi"
   2
   3 / {
   4         chosen {
   5                 bootargs = "console=ttyS0,115200";
   6         };
   7
   8         gpio-keys-polled {
   9                 compatible = "gpio-keys-polled";
  10                 #address-cells = <1>;
  11                 #size-cells = <0>;
  12                 poll-interval = <20>;
  13
  14                 reset {
  15                         label = "reset";
  16                         gpios = <&gpio0 5 1>;
  17                         linux,code = <0x198>;
  18                 };
  19         };
  20 };
  21
  22 &spi0 {
  23         status = "okay";
  24
  25         m25p80@0 {
  26                 #address-cells = <1>;
  27                 #size-cells = <1>;
  28                 compatible = "jedec,spi-nor";
  29                 reg = <0 0>;
  30                 spi-max-frequency = <10000000>;
  31                 m25p,chunked-io = <32>;
  32
  33                 partition@0 {
  34                         label = "u-boot";
  35                         reg = <0x0 0x30000>;
  36                         read-only;
  37                 };
  38
  39                 partition@30000 {
  40                         label = "u-boot-env";
  41                         reg = <0x30000 0x10000>;
  42                         read-only;
  43                 };
  44
  45                 factory: partition@40000 {
  46                         label = "factory";
  47                         reg = <0x40000 0x10000>;
  48                         read-only;
  49                 };
  50
  51                 partition@50000 {
  52                         label = "firmware";
  53                         reg = <0x50000 0x1fb0000>;
  54                 };
  55         };
  56
  57         spidev@1 {
  58                 #address-cells = <1>;
  59                 #size-cells = <1>;
  60                 compatible = "spidev";
  61                 reg = <1 0>;
  62                 linux,modalias = "spidev", "spidev";
  63                 spi-max-frequency = <10000000>;
  64         };
  65 };
  66
  67 &uart1 {
  68         status = "okay";
  69 };
  70
  71 &i2c {
  72         status = "okay";
  73 };
  74
  75 &ethernet {
  76         mtd-mac-address = <&factory 0x4>;
  77         ralink,port-map = "llllw";
  78 };
  79
  80 &sdhci {
  81         status = "okay";
  82 };
  83
  84 &pcie {
  85         status = "okay";
  86 };
  87