target/linux/ramips/dts/Y1S.dts

   1 /dts-v1/;
   2
   3 #include "Y1.dtsi"
   4
   5 / {
   6         compatible = "lenovo,Y1S", "ralink,mt7620a-soc";
   7         model = "Lenovo Y1S";
   8
   9         gpio_export {
  10                 compatible = "gpio-export";
  11                 #size-cells = <0>;
  12                 /* GPIO 54、55、56 USB1、2、3 */
  13                 usb0 {
  14                         gpio-export,name = "usb0";
  15                         gpio-export,output = <1>; // GPIOF_OUT_INIT_HIGH
  16                         gpios = <&gpio2 14 0>; // GPIO2:40+14=GPIO 54
  17                 };
  18                 usb1 {
  19                         gpio-export,name = "usb1";
  20                         gpio-export,output = <1>;
  21                         gpios = <&gpio2 15 0>;
  22                 };
  23                 usb2 {
  24                         gpio-export,name = "usb2";
  25                         gpio-export,output = <1>;
  26                         gpios = <&gpio2 16 0>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 power1 {
  34                         label = "y1s:yellow:power";
  35                         gpios = <&gpio0 14 1>;
  36                 };
  37
  38                 power2 {
  39                         label = "y1s:blue:power";
  40                         gpios = <&gpio0 9 1>;
  41                 };
  42
  43                 wlan1 {
  44                         label = "y1s:yellow:wifi";
  45                         gpios = <&gpio3 0 1>;
  46                 };
  47
  48                 wlan2 {
  49                         label = "y1s:blue:wifi";
  50                         gpios = <&gpio2 10 1>;
  51                 };
  52
  53                 usb1 {
  54                         label = "y1s:yellow:usb";
  55                         gpios = <&gpio2 13 1>;
  56                 };
  57
  58                 usb2 {
  59                         label = "y1s:blue:usb";
  60                         gpios = <&gpio2 12 1>;
  61                 };
  62
  63                 internet {
  64                         label = "y1s:blue:internet";
  65                         gpios = <&gpio2 11 1>;
  66                 };
  67         };
  68 };
  69
  70 &ethernet {
  71         status = "okay";
  72         mtd-mac-address = <&factory 0x4>;
  73         pinctrl-names = "default";
  74         pinctrl-0 = <&rgmii1_pins &rgmii2_pins &mdio_pins>;
  75         mediatek,portmap = "wllll";
  76
  77         port@4 {
  78                 status = "okay";
  79                 phy-handle = <&phy4>;
  80                 phy-mode = "rgmii";
  81         };
  82
  83         port@5 {
  84                 status = "okay";
  85                 phy-handle = <&phy5>;
  86                 phy-mode = "rgmii";
  87         };
  88
  89         mdio-bus {
  90                 status = "okay";
  91
  92                 phy4: ethernet-phy@4 {
  93                         reg = <4>;
  94                         phy-mode = "rgmii";
  95                 };
  96
  97                 phy5: ethernet-phy@5 {
  98                         reg = <5>;
  99                         phy-mode = "rgmii";
 100                 };
 101         };
 102 };
 103
 104 &gsw {
 105         mediatek,port4 = "gmac";
 106 };