# Example wpa_supplicant build time configuration # # This file lists the configuration options that are used when building the # hostapd binary. All lines starting with # are ignored. Configuration option # lines must be commented out complete, if they are not to be included, i.e., # just setting VARIABLE=n is not disabling that variable. # # This file is included in Makefile, so variables like CFLAGS and LIBS can also # be modified from here. In most cases, these lines should use += in order not # to override previous values of the variables. # Uncomment following two lines and fix the paths if you have installed OpenSSL # or GnuTLS in non-default location #CFLAGS += -I/usr/local/openssl/include #LIBS += -L/usr/local/openssl/lib # Some Red Hat versions seem to include kerberos header files from OpenSSL, but # the kerberos files are not in the default include path. Following line can be # used to fix build issues on such systems (krb5.h not found). #CFLAGS += -I/usr/include/kerberos # Example configuration for various cross-compilation platforms #### sveasoft (e.g., for Linksys WRT54G) ###################################### #CC=mipsel-uclibc-gcc #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc #CFLAGS += -Os #CPPFLAGS += -I../src/include -I../../src/router/openssl/include #LIBS += -L/opt/brcm/hndtools-mipsel-uclibc-0.9.19/lib -lssl ############################################################################### #### openwrt (e.g., for Linksys WRT54G) ####################################### #CC=mipsel-uclibc-gcc #CC=/opt/brcm/hndtools-mipsel-uclibc/bin/mipsel-uclibc-gcc #CFLAGS += -Os #CPPFLAGS=-I../src/include -I../openssl-0.9.7d/include \ # -I../WRT54GS/release/src/include #LIBS = -lssl ############################################################################### # Driver interface for Host AP driver #CONFIG_DRIVER_HOSTAP=y # Driver interface for Agere driver #CONFIG_DRIVER_HERMES=y # Change include directories to match with the local setup #CFLAGS += -I../../hcf -I../../include -I../../include/hcf #CFLAGS += -I../../include/wireless # Driver interface for ndiswrapper # Deprecated; use CONFIG_DRIVER_WEXT=y instead. #CONFIG_DRIVER_NDISWRAPPER=y # Driver interface for Atmel driver # CONFIG_DRIVER_ATMEL=y # Driver interface for old Broadcom driver # Please note that the newer Broadcom driver ("hybrid Linux driver") supports # Linux wireless extensions and does not need (or even work) with the old # driver wrapper. Use CONFIG_DRIVER_WEXT=y with that driver. #CONFIG_DRIVER_BROADCOM=y # Example path for wlioctl.h; change to match your configuration #CFLAGS += -I/opt/WRT54GS/release/src/include # Driver interface for Intel ipw2100/2200 driver # Deprecated; use CONFIG_DRIVER_WEXT=y instead. #CONFIG_DRIVER_IPW=y # Driver interface for Ralink driver #CONFIG_DRIVER_RALINK=y # Driver interface for generic Linux wireless extensions CONFIG_DRIVER_WEXT=y # Driver interface for Linux drivers using the nl80211 kernel interface CONFIG_DRIVER_NL80211=y # Driver interface for FreeBSD net80211 layer (e.g., Atheros driver) #CONFIG_DRIVER_BSD=y #CFLAGS += -I/usr/local/include #LIBS += -L/usr/local/lib #LIBS_p += -L/usr/local/lib #LIBS_c += -L/usr/local/lib # Driver interface for Windows NDIS #CONFIG_DRIVER_NDIS=y #CFLAGS += -I/usr/include/w32api/ddk #LIBS += -L/usr/local/lib # For native build using mingw #CONFIG_NATIVE_WINDOWS=y # Additional directories for cross-compilation on Linux host for mingw target #CFLAGS += -I/opt/mingw/mingw32/include/ddk #LIBS += -L/opt/mingw/mingw32/lib #CC=mingw32-gcc # By default, driver_ndis uses WinPcap for low-level operations. This can be # replaced with the following option which replaces WinPcap calls with NDISUIO. # However, this requires that WZC is disabled (net stop wzcsvc) before starting # wpa_supplicant. # CONFIG_USE_NDISUIO=y # Driver interface for development testing #CONFIG_DRIVER_TEST=y # Include client MLME (management frame processing) for test driver # This can be used to test MLME operations in hostapd with the test interface. # space. #CONFIG_CLIENT_MLME=y # Driver interface for wired Ethernet drivers CONFIG_DRIVER_WIRED=y # Driver interface for the Broadcom RoboSwitch family #CONFIG_DRIVER_ROBOSWITCH=y # Driver interface for no driver (e.g., WPS ER only) #CONFIG_DRIVER_NONE=y # Enable IEEE 802.1X Supplicant (automatically included if any EAP method is # included) # CONFIG_IEEE8021X_EAPOL=y # EAP-MD5 # CONFIG_EAP_MD5=y # EAP-MSCHAPv2 # CONFIG_EAP_MSCHAPV2=y # EAP-TLS # CONFIG_EAP_TLS=y # EAL-PEAP # CONFIG_EAP_PEAP=y # EAP-TTLS # CONFIG_EAP_TTLS=y # EAP-FAST # Note: Default OpenSSL package does not include support for all the # functionality needed for EAP-FAST. If EAP-FAST is enabled with OpenSSL, # the OpenSSL library must be patched (openssl-0.9.8d-tls-extensions.patch) # to add the needed functions. #CONFIG_EAP_FAST=y # EAP-GTC # CONFIG_EAP_GTC=y # EAP-OTP # CONFIG_EAP_OTP=y # EAP-SIM (enable CONFIG_PCSC, if EAP-SIM is used) #CONFIG_EAP_SIM=y # EAP-PSK (experimental; this is _not_ needed for WPA-PSK) #CONFIG_EAP_PSK=y # EAP-PAX #CONFIG_EAP_PAX=y # LEAP # CONFIG_EAP_LEAP=y # EAP-AKA (enable CONFIG_PCSC, if EAP-AKA is used) #CONFIG_EAP_AKA=y # EAP-AKA' (enable CONFIG_PCSC, if EAP-AKA' is used). # This requires CONFIG_EAP_AKA to be enabled, too. #CONFIG_EAP_AKA_PRIME=y # Enable USIM simulator (Milenage) for EAP-AKA #CONFIG_USIM_SIMULATOR=y # EAP-SAKE #CONFIG_EAP_SAKE=y # EAP-GPSK #CONFIG_EAP_GPSK=y # Include support for optional SHA256 cipher suite in EAP-GPSK #CONFIG_EAP_GPSK_SHA256=y # EAP-TNC and related Trusted Network Connect support (experimental) #CONFIG_EAP_TNC=y # Wi-Fi Protected Setup (WPS) #CONFIG_WPS=y # EAP-IKEv2 #CONFIG_EAP_IKEV2=y # PKCS#12 (PFX) support (used to read private key and certificate file from # a file that usually has extension .p12 or .pfx) # CONFIG_PKCS12=y # Smartcard support (i.e., private key on a smartcard), e.g., with openssl # engine. # CONFIG_SMARTCARD=y # PC/SC interface for smartcards (USIM, GSM SIM) # Enable this if EAP-SIM or EAP-AKA is included #CONFIG_PCSC=y # Development testing #CONFIG_EAPOL_TEST=y # Select control interface backend for external programs, e.g, wpa_cli: # unix = UNIX domain sockets (default for Linux/*BSD) # udp = UDP sockets using localhost (127.0.0.1) # named_pipe = Windows Named Pipe (default for Windows) # y = use default (backwards compatibility) # If this option is commented out, control interface is not included in the # build. CONFIG_CTRL_IFACE=y # Include support for GNU Readline and History Libraries in wpa_cli. # When building a wpa_cli binary for distribution, please note that these # libraries are licensed under GPL and as such, BSD license may not apply for # the resulting binary. #CONFIG_READLINE=y # Remove debugging code that is printing out debug message to stdout. # This can be used to reduce the size of the wpa_supplicant considerably # if debugging code is not needed. The size reduction can be around 35% # (e.g., 90 kB). #CONFIG_NO_STDOUT_DEBUG=y # Remove WPA support, e.g., for wired-only IEEE 802.1X supplicant, to save # 35-50 kB in code size. #CONFIG_NO_WPA=y # Remove WPA2 support. This allows WPA to be used, but removes WPA2 code to # save about 1 kB in code size when building only WPA-Personal (no EAP support) # or 6 kB if building for WPA-Enterprise. #CONFIG_NO_WPA2=y # Remove IEEE 802.11i/WPA-Personal ASCII passphrase support # This option can be used to reduce code size by removing support for # converting ASCII passphrases into PSK. If this functionality is removed, the # PSK can only be configured as the 64-octet hexstring (e.g., from # wpa_passphrase). This saves about 0.5 kB in code size. #CONFIG_NO_WPA_PASSPHRASE=y # Disable scan result processing (ap_mode=1) to save code size by about 1 kB. # This can be used if ap_scan=1 mode is never enabled. #CONFIG_NO_SCAN_PROCESSING=y # Select configuration backend: # file = text file (e.g., wpa_supplicant.conf; note: the configuration file # path is given on command line, not here; this option is just used to # select the backend that allows configuration files to be used) # winreg = Windows registry (see win_example.reg for an example) CONFIG_BACKEND=file # Remove configuration write functionality (i.e., to allow the configuration # file to be updated based on runtime configuration changes). The runtime # configuration can still be changed, the changes are just not going to be # persistent over restarts. This option can be used to reduce code size by # about 3.5 kB. #CONFIG_NO_CONFIG_WRITE=y # Remove support for configuration blobs to reduce code size by about 1.5 kB. #CONFIG_NO_CONFIG_BLOBS=y # Select program entry point implementation: # main = UNIX/POSIX like main() function (default) # main_winsvc = Windows service (read parameters from registry) # main_none = Very basic example (development use only) #CONFIG_MAIN=main # Select wrapper for operatins system and C library specific functions # unix = UNIX/POSIX like systems (default) # win32 = Windows systems # none = Empty template #CONFIG_OS=unix # Select event loop implementation # eloop = select() loop (default) # eloop_win = Windows events and WaitForMultipleObject() loop # eloop_none = Empty template #CONFIG_ELOOP=eloop # Select layer 2 packet implementation # linux = Linux packet socket (default) # pcap = libpcap/libdnet/WinPcap # freebsd = FreeBSD libpcap # winpcap = WinPcap with receive thread # ndis = Windows NDISUIO (note: requires CONFIG_USE_NDISUIO=y) # none = Empty template #CONFIG_L2_PACKET=linux # PeerKey handshake for Station to Station Link (IEEE 802.11e DLS) # CONFIG_PEERKEY=y # IEEE 802.11w (management frame protection) # This version is an experimental implementation based on IEEE 802.11w/D1.0 # draft and is subject to change since the standard has not yet been finalized. # Driver support is also needed for IEEE 802.11w. #CONFIG_IEEE80211W=y # Select TLS implementation # openssl = OpenSSL (default) # gnutls = GnuTLS (needed for TLS/IA, see also CONFIG_GNUTLS_EXTRA) # internal = Internal TLSv1 implementation (experimental) # none = Empty template CONFIG_TLS=internal # Whether to enable TLS/IA support, which is required for EAP-TTLSv1. # You need CONFIG_TLS=gnutls for this to have any effect. Please note that # even though the core GnuTLS library is released under LGPL, this extra # library uses GPL and as such, the terms of GPL apply to the combination # of wpa_supplicant and GnuTLS if this option is enabled. BSD license may not # apply for distribution of the resulting binary. #CONFIG_GNUTLS_EXTRA=y # If CONFIG_TLS=internal is used, additional library and include paths are # needed for LibTomMath. Alternatively, an integrated, minimal version of # LibTomMath can be used. See beginning of libtommath.c for details on benefits # and drawbacks of this option. #CONFIG_INTERNAL_LIBTOMMATH=y #ifndef CONFIG_INTERNAL_LIBTOMMATH #LTM_PATH=/usr/src/libtommath-0.39 #CFLAGS += -I$(LTM_PATH) #LIBS += -L$(LTM_PATH) #LIBS_p += -L$(LTM_PATH) #endif # At the cost of about 4 kB of additional binary size, the internal LibTomMath # can be configured to include faster routines for exptmod, sqr, and div to # speed up DH and RSA calculation considerably #CONFIG_INTERNAL_LIBTOMMATH_FAST=y # Include NDIS event processing through WMI into wpa_supplicant/wpasvc. # This is only for Windows builds and requires WMI-related header files and # WbemUuid.Lib from Platform SDK even when building with MinGW. #CONFIG_NDIS_EVENTS_INTEGRATED=y #PLATFORMSDKLIB="/opt/Program Files/Microsoft Platform SDK/Lib" # Add support for old DBus control interface # (fi.epitest.hostap.WPASupplicant) #CONFIG_CTRL_IFACE_DBUS=y # Add support for new DBus control interface # (fi.w1.hostap.wpa_supplicant1) #CONFIG_CTRL_IFACE_DBUS_NEW=y # Add introspection support for new DBus control interface #CONFIG_CTRL_IFACE_DBUS_INTRO=y # Add support for loading EAP methods dynamically as shared libraries. # When this option is enabled, each EAP method can be either included # statically (CONFIG_EAP_=y) or dynamically (CONFIG_EAP_=dyn). # Dynamic EAP methods are build as shared objects (eap_*.so) and they need to # be loaded in the beginning of the wpa_supplicant configuration file # (see load_dynamic_eap parameter in the example file) before being used in # the network blocks. # # Note that some shared parts of EAP methods are included in the main program # and in order to be able to use dynamic EAP methods using these parts, the # main program must have been build with the EAP method enabled (=y or =dyn). # This means that EAP-TLS/PEAP/TTLS/FAST cannot be added as dynamic libraries # unless at least one of them was included in the main build to force inclusion # of the shared code. Similarly, at least one of EAP-SIM/AKA must be included # in the main build to be able to load these methods dynamically. # # Please also note that using dynamic libraries will increase the total binary # size. Thus, it may not be the best option for targets that have limited # amount of memory/flash. #CONFIG_DYNAMIC_EAP_METHODS=y # IEEE Std 802.11r-2008 (Fast BSS Transition) #CONFIG_IEEE80211R=y # Add support for writing debug log to a file (/tmp/wpa_supplicant-log-#.txt) #CONFIG_DEBUG_FILE=y # Enable privilege separation (see README 'Privilege separation' for details) #CONFIG_PRIVSEP=y # Enable mitigation against certain attacks against TKIP by delaying Michael # MIC error reports by a random amount of time between 0 and 60 seconds #CONFIG_DELAYED_MIC_ERROR_REPORT=y # Enable tracing code for developer debugging # This tracks use of memory allocations and other registrations and reports # incorrect use with a backtrace of call (or allocation) location. #CONFIG_WPA_TRACE=y # For BSD, comment out these. #LIBS += -lexecinfo #LIBS_p += -lexecinfo #LIBS_c += -lexecinfo # Use libbfd to get more details for developer debugging # This enables use of libbfd to get more detailed symbols for the backtraces # generated by CONFIG_WPA_TRACE=y. #CONFIG_WPA_TRACE_BFD=y # For BSD, comment out these. #LIBS += -lbfd -liberty -lz #LIBS_p += -lbfd -liberty -lz #LIBS_c += -lbfd -liberty -lz CONFIG_NO_RANDOM_POOL=y NEED_80211_COMMON=y