include ./common-buffalo.mk include ./common-netgear.mk DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK DEVICE_VARS += KERNEL_INITRAMFS_PREFIX define Build/cybertan-trx @echo -n '' > $@-empty.bin -$(STAGING_DIR_HOST)/bin/trx -o $@.new \ -f $(IMAGE_KERNEL) -F $@-empty.bin \ -x 32 -a 0x10000 -x -32 -f $@ -mv "$@.new" "$@" -rm $@-empty.bin endef define Build/addpattern -$(STAGING_DIR_HOST)/bin/addpattern -B $(ADDPATTERN_ID) \ -v v$(ADDPATTERN_VERSION) -i $@ -o $@.new -mv "$@.new" "$@" endef define Build/add-elecom-factory-initramfs $(eval edimax_model=$(word 1,$(1))) $(eval product=$(word 2,$(1))) $(STAGING_DIR_HOST)/bin/mkedimaximg \ -b -s CSYS -m $(edimax_model) \ -f 0x70000 -S 0x01100000 \ -i $@ -o $@.factory ( \ echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \ echo -n "0.00" | dd bs=16 count=1 conv=sync; \ dd if=$@.factory; \ ) > $@.factory.new if [ "$$(stat -c%s $@.factory.new)" -le $$(($(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE))))) ]; then \ mv $@.factory.new $(BIN_DIR)/$(KERNEL_INITRAMFS_PREFIX)-factory.bin; \ else \ echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \ fi endef define Build/nec-enc $(STAGING_DIR_HOST)/bin/nec-enc \ -i $@ -o $@.new -k $(1) mv $@.new $@ endef define Build/nec-fw ( stat -c%s $@ | tr -d "\n" | dd bs=16 count=1 conv=sync; ) >> $@ ( \ echo -n -e "$(1)" | dd bs=16 count=1 conv=sync; \ echo -n "0.0.00" | dd bs=16 count=1 conv=sync; \ dd if=$@; \ ) > $@.new mv $@.new $@ endef define Device/seama KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma KERNEL_INITRAMFS := $$(KERNEL) | seama IMAGES += factory.bin SEAMA_MTDBLOCK := 1 # 64 bytes offset: # - 28 bytes seama_header # - 36 bytes of META data (4-bytes aligned) IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs IMAGE/sysupgrade.bin := \ $$(IMAGE/default) | seama | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := \ $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | check-size $$$$(IMAGE_SIZE) SEAMA_SIGNATURE := endef define Device/8dev_carambola2 ATH_SOC := ar9331 DEVICE_VENDOR := 8devices DEVICE_MODEL := Carambola2 DEVICE_PACKAGES := kmod-usb2 kmod-usb-chipidea2 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += carambola2 endef TARGET_DEVICES += 8dev_carambola2 define Device/aruba_ap-105 ATH_SOC := ar7161 DEVICE_VENDOR := Aruba DEVICE_MODEL := AP-105 IMAGE_SIZE := 16000k DEVICE_PACKAGES := kmod-i2c-core kmod-i2c-gpio kmod-tpm-i2c-atmel endef TARGET_DEVICES += aruba_ap-105 define Device/avm_fritz300e ATH_SOC := ar7242 DEVICE_VENDOR := AVM DEVICE_MODEL := FRITZ!WLAN Repeater 300E KERNEL := kernel-bin | append-dtb | lzma | eva-image KERNEL_INITRAMFS := $$(KERNEL) IMAGE_SIZE := 15232k IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ append-squashfs-fakeroot-be | pad-to 256 | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) DEVICE_PACKAGES := fritz-tffs rssileds -swconfig endef TARGET_DEVICES += avm_fritz300e define Device/avm_fritz4020 ATH_SOC := qca9561 DEVICE_VENDOR := AVM DEVICE_MODEL := FRITZ!Box 4020 IMAGE_SIZE := 15232k KERNEL := kernel-bin | append-dtb | lzma | eva-image KERNEL_INITRAMFS := $$(KERNEL) IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \ append-squashfs-fakeroot-be | pad-to 256 | \ append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) DEVICE_PACKAGES := fritz-tffs SUPPORTED_DEVICES += fritz4020 endef TARGET_DEVICES += avm_fritz4020 define Device/buffalo_bhr-4grv ATH_SOC := ar7242 DEVICE_VENDOR := Buffalo DEVICE_MODEL := BHR-4GRV DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport IMAGE_SIZE := 32256k IMAGES += factory.bin tftp.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | buffalo-tag BHR-4GRV 3 IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header SUPPORTED_DEVICES += wzr-hp-g450h endef TARGET_DEVICES += buffalo_bhr-4grv define Device/buffalo_bhr-4grv2 ATH_SOC := qca9557 DEVICE_VENDOR := Buffalo DEVICE_MODEL := BHR-4GRV2 IMAGE_SIZE := 16000k endef TARGET_DEVICES += buffalo_bhr-4grv2 define Device/buffalo_wzr-hp-ag300h ATH_SOC := ar7161 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WZR-HP-AG300H IMAGE_SIZE := 32256k IMAGES += factory.bin tftp.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-AG300H 1.99 | buffalo-tag WZR-HP-AG300H 3 IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader SUPPORTED_DEVICES += wzr-hp-ag300h endef TARGET_DEVICES += buffalo_wzr-hp-ag300h define Device/buffalo_wzr-hp-g302h-a1a0 ATH_SOC := ar7242 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WZR-HP-G302H DEVICE_VARIANT := A1A0 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport IMAGE_SIZE := 32128k IMAGES += factory.bin tftp.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G302H 1.99 | buffalo-tag WZR-HP-G302H 4 IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header SUPPORTED_DEVICES += wzr-hp-g300nh2 endef TARGET_DEVICES += buffalo_wzr-hp-g302h-a1a0 define Device/buffalo_wzr-hp-g450h ATH_SOC := ar7242 DEVICE_VENDOR := Buffalo DEVICE_MODEL := WZR-HP-G450H/WZR-450HP DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport IMAGE_SIZE := 32256k IMAGES += factory.bin tftp.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | buffalo-tag WZR-HP-G450H 3 IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header SUPPORTED_DEVICES += wzr-hp-g450h endef TARGET_DEVICES += buffalo_wzr-hp-g450h define Device/comfast_cf-e110n-v2 ATH_SOC := qca9533 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E110N DEVICE_VARIANT := v2 DEVICE_PACKAGES := rssileds kmod-leds-gpio -swconfig -uboot-envtools IMAGE_SIZE := 16192k endef TARGET_DEVICES += comfast_cf-e110n-v2 define Device/comfast_cf-e120a-v3 ATH_SOC := ar9344 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E120A DEVICE_VARIANT := v3 DEVICE_PACKAGES := rssileds kmod-leds-gpio -uboot-envtools IMAGE_SIZE := 8000k endef TARGET_DEVICES += comfast_cf-e120a-v3 define Device/comfast_cf-e5 ATH_SOC := qca9531 DEVICE_VENDOR := COMFAST DEVICE_MODEL := CF-E5/E7 DEVICE_PACKAGES := rssileds kmod-leds-gpio kmod-usb-core kmod-usb2 kmod-usb-net \ kmod-usb-net-qmi-wwan -swconfig -uboot-envtools IMAGE_SIZE := 16192k endef TARGET_DEVICES += comfast_cf-e5 define Device/devolo_dvl1200e ATH_SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1200e DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1200e define Device/devolo_dvl1200i ATH_SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1200i DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1200i define Device/devolo_dvl1750c ATH_SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1750c DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1750c define Device/devolo_dvl1750e ATH_SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1750e DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1750e define Device/devolo_dvl1750i ATH_SOC := qca9558 DEVICE_VENDOR := devolo DEVICE_MODEL := WiFi pro 1750i DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15936k endef TARGET_DEVICES += devolo_dvl1750i define Device/dlink_dir-825-b1 ATH_SOC := ar7161 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-825 DEVICE_VARIANT := B1 IMAGE_SIZE := 6208k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader SUPPORTED_DEVICES += dir-825-b1 endef TARGET_DEVICES += dlink_dir-825-b1 define Device/dlink_dir-825-c1 ATH_SOC := ar9344 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-825 DEVICE_VARIANT := C1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader SUPPORTED_DEVICES += dir-825-c1 IMAGE_SIZE := 15936k IMAGES := factory.bin sysupgrade.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \ append-string 00DB120AR9344-RT-101214-00 | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += dlink_dir-825-c1 define Device/dlink_dir-835-a1 ATH_SOC := ar9344 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-835 DEVICE_VARIANT := A1 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-leds-reset kmod-owl-loader SUPPORTED_DEVICES += dir-835-a1 IMAGE_SIZE := 15936k IMAGES := factory.bin sysupgrade.bin IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs IMAGE/factory.bin := $$(IMAGE/default) | pad-offset $$$$(IMAGE_SIZE) 26 | \ append-string 00DB120AR9344-RT-101214-00 | check-size $$$$(IMAGE_SIZE) IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += dlink_dir-835-a1 define Device/dlink_dir-859-a1 $(Device/seama) ATH_SOC := qca9563 DEVICE_VENDOR := D-Link DEVICE_MODEL := DIR-859 DEVICE_VARIANT := A1 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct SEAMA_SIGNATURE := wrgac37_dlink.2013gui_dir859 SUPPORTED_DEVICES += dir-859-a1 endef TARGET_DEVICES += dlink_dir-859-a1 define Device/elecom_wrc-1750ghbk2-i ATH_SOC := qca9563 DEVICE_VENDOR := ELECOM DEVICE_MODEL := WRC-1750GHBK2-I/C IMAGE_SIZE := 15808k KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \ add-elecom-factory-initramfs RN68 WRC-1750GHBK2 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += elecom_wrc-1750ghbk2-i define Device/elecom_wrc-300ghbk2-i ATH_SOC := qca9563 DEVICE_VENDOR := ELECOM DEVICE_MODEL := WRC-300GHBK2-I IMAGE_SIZE := 7616k KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \ add-elecom-factory-initramfs RN51 WRC-300GHBK2-I endef TARGET_DEVICES += elecom_wrc-300ghbk2-i define Device/embeddedwireless_dorin ATH_SOC := ar9331 DEVICE_VENDOR := Embedded Wireless DEVICE_MODEL := Dorin DEVICE_PACKAGES := kmod-usb-chipidea2 IMAGE_SIZE := 16000k endef TARGET_DEVICES += embeddedwireless_dorin define Device/engenius_ecb1750 ATH_SOC := qca9558 DEVICE_VENDOR := EnGenius DEVICE_MODEL := ECB1750 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 15680k IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ senao-header -r 0x101 -p 0x6d -t 2 IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += engenius_ecb1750 define Device/engenius_epg5000 ATH_SOC := qca9558 DEVICE_VENDOR := EnGenius DEVICE_MODEL := EPG5000 DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct kmod-usb2 IMAGE_SIZE := 14656k IMAGES += factory.dlf IMAGE/factory.dlf := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ senao-header -r 0x101 -p 0x71 -t 2 SUPPORTED_DEVICES += epg5000 endef TARGET_DEVICES += engenius_epg5000 define Device/engenius_ews511ap ATH_SOC := qca9531 DEVICE_VENDOR := EnGenius DEVICE_MODEL := EWS511AP DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct IMAGE_SIZE := 16000k endef TARGET_DEVICES += engenius_ews511ap define Device/etactica_eg200 ATH_SOC := ar9331 DEVICE_VENDOR := eTactica DEVICE_MODEL := EG200 DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \ kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4 SUPPORTED_DEVICES += rme-eg200 endef TARGET_DEVICES += etactica_eg200 define Device/glinet_gl-ar150 ATH_SOC := ar9330 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR150 DEVICE_PACKAGES := kmod-usb-chipidea2 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += gl-ar150 endef TARGET_DEVICES += glinet_gl-ar150 define Device/glinet_gl-ar300m-common-nor ATH_SOC := qca9531 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += gl-ar300m endef define Device/glinet_gl-ar300m-lite $(Device/glinet_gl-ar300m-common-nor) DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR300M-Lite endef TARGET_DEVICES += glinet_gl-ar300m-lite define Device/glinet_gl-ar300m-nor $(Device/glinet_gl-ar300m-common-nor) DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR300M endef TARGET_DEVICES += glinet_gl-ar300m-nor define Device/glinet_gl-ar750s ATH_SOC := qca9563 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-AR750S DEVICE_PACKAGES := kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct block-mount IMAGE_SIZE := 16000k SUPPORTED_DEVICES += gl-ar750s endef TARGET_DEVICES += glinet_gl-ar750s define Device/glinet_gl-x750 ATH_SOC := qca9531 DEVICE_VENDOR := GL.iNet DEVICE_MODEL := GL-X750 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca9887-ct IMAGE_SIZE := 16000k endef TARGET_DEVICES += glinet_gl-x750 define Device/iodata_etg3-r ATH_SOC := ar9342 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := ETG3-R IMAGE_SIZE := 7680k DEVICE_PACKAGES := -iwinfo -kmod-ath9k -wpad-basic endef TARGET_DEVICES += iodata_etg3-r define Device/iodata_wn-ac1167dgr ATH_SOC := qca9557 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AC1167DGR IMAGE_SIZE := 14656k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ senao-header -r 0x30a -p 0x61 -t 2 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += iodata_wn-ac1167dgr define Device/iodata_wn-ac1600dgr ATH_SOC := qca9557 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AC1600DGR IMAGE_SIZE := 14656k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ senao-header -r 0x30a -p 0x60 -t 2 -v 200 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += iodata_wn-ac1600dgr define Device/iodata_wn-ac1600dgr2 ATH_SOC := qca9557 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AC1600DGR2 IMAGE_SIZE := 14656k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ senao-header -r 0x30a -p 0x60 -t 2 -v 200 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct endef TARGET_DEVICES += iodata_wn-ac1600dgr2 define Device/iodata_wn-ag300dgr ATH_SOC := ar1022 DEVICE_VENDOR := I-O DATA DEVICE_MODEL := WN-AG300DGR IMAGE_SIZE := 15424k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ senao-header -r 0x30a -p 0x47 -t 2 DEVICE_PACKAGES := kmod-usb-core kmod-usb2 endef TARGET_DEVICES += iodata_wn-ag300dgr define Device/jjplus_ja76pf2 ATH_SOC := ar7161 DEVICE_VENDOR := jjPlus DEVICE_MODEL := JA76PF2 DEVICE_PACKAGES += -kmod-ath9k -swconfig -wpad-mini -uboot-envtools fconfig IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) # IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | sysupgrade-tar rootfs=$$$$@ | append-metadata KERNEL := kernel-bin | append-dtb | lzma | pad-to $$(BLOCKSIZE) KERNEL_INITRAMFS := kernel-bin | append-dtb IMAGE_SIZE := 16000k endef TARGET_DEVICES += jjplus_ja76pf2 define Device/librerouter_librerouter-v1 ATH_SOC := qca9558 DEVICE_VENDOR := Librerouter DEVICE_MODEL := LibreRouter DEVICE_VARIANT := v1 IMAGE_SIZE := 7936k DEVICE_PACKAGES := kmod-usb-core kmod-usb2 endef TARGET_DEVICES += librerouter_librerouter-v1 define Device/nec_wg1200cr ATH_SOC := qca9563 DEVICE_VENDOR := NEC DEVICE_MODEL := Aterm WG1200CR IMAGE_SIZE := 7616k SEAMA_MTDBLOCK := 6 SEAMA_SIGNATURE := wrgac72_necpf.2016gui_wg1200cr IMAGES += factory.bin IMAGE/default := \ append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | append-rootfs IMAGE/sysupgrade.bin := \ $$(IMAGE/default) | seama | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) IMAGE/factory.bin := \ $$(IMAGE/default) | pad-rootfs -x 64 | seama | seama-seal | nec-enc 9gsiy9nzep452pad | \ check-size $$$$(IMAGE_SIZE) DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct endef TARGET_DEVICES += nec_wg1200cr define Device/nec_wg800hp ATH_SOC := qca9563 DEVICE_VENDOR := NEC DEVICE_MODEL := Aterm WG800HP IMAGE_SIZE := 7104k IMAGES += factory.bin IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \ xor-image -p 6A57190601121E4C004C1E1201061957 -x | \ nec-fw LASER_ATERM DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct-htt endef TARGET_DEVICES += nec_wg800hp define Device/ocedo_koala ATH_SOC := qca9558 DEVICE_VENDOR := Ocedo DEVICE_MODEL := Koala DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct SUPPORTED_DEVICES += koala IMAGE_SIZE := 7424k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += ocedo_koala define Device/ocedo_raccoon ATH_SOC := ar9344 DEVICE_VENDOR := Ocedo DEVICE_MODEL := Raccoon IMAGE_SIZE := 7424k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += ocedo_raccoon define Device/ocedo_ursus ATH_SOC := qca9558 DEVICE_VENDOR := Ocedo DEVICE_MODEL := Ursus DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct IMAGE_SIZE := 7424k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) endef TARGET_DEVICES += ocedo_ursus define Device/openmesh_om5p-ac-v2 ATH_SOC := qca9558 DEVICE_VENDOR := OpenMesh DEVICE_MODEL := OM5P-AC DEVICE_VARIANT := v2 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct om-watchdog IMAGE_SIZE := 7808k SUPPORTED_DEVICES += om5p-acv2 endef TARGET_DEVICES += openmesh_om5p-ac-v2 define Device/pcs_cap324 ATH_SOC := ar9344 DEVICE_VENDOR := PowerCloud Systems DEVICE_MODEL := CAP324 IMAGE_SIZE := 16000k SUPPORTED_DEVICES += cap324 endef TARGET_DEVICES += pcs_cap324 define Device/pcs_cr3000 ATH_SOC := ar9341 DEVICE_VENDOR := PowerCloud Systems DEVICE_MODEL := CR3000 IMAGE_SIZE := 7808k SUPPORTED_DEVICES += cr3000 endef TARGET_DEVICES += pcs_cr3000 define Device/pcs_cr5000 ATH_SOC := ar9344 DEVICE_VENDOR := PowerCloud Systems DEVICE_MODEL := CR5000 DEVICE_PACKAGES := kmod-usb2 kmod-usb-core IMAGE_SIZE := 7808k SUPPORTED_DEVICES += cr5000 endef TARGET_DEVICES += pcs_cr5000 define Device/netgear_wndr3x00 ATH_SOC := ar7161 IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader $(Device/netgear_ath79) endef define Device/netgear_ex7300_ex6400 ATH_SOC := qca9558 NETGEAR_KERNEL_MAGIC := 0x27051956 NETGEAR_BOARD_ID := EX7300series NETGEAR_HW_ID := 29765104+16+0+128 IMAGE_SIZE := 15552k IMAGE/default := append-kernel | pad-offset $$$$(BLOCKSIZE) 64 | netgear-rootfs | pad-rootfs DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca99x0-ct $(Device/netgear_ath79) endef define Device/netgear_ex6400 $(Device/netgear_ex7300_ex6400) DEVICE_MODEL := EX6400 endef TARGET_DEVICES += netgear_ex6400 define Device/netgear_ex7300 $(Device/netgear_ex7300_ex6400) DEVICE_MODEL := EX7300 endef TARGET_DEVICES += netgear_ex7300 define Device/netgear_wndr3700 $(Device/netgear_wndr3x00) DEVICE_MODEL := WNDR3700 NETGEAR_KERNEL_MAGIC := 0x33373030 NETGEAR_BOARD_ID := WNDR3700 IMAGE_SIZE := 7680k IMAGES += factory-NA.img IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE) SUPPORTED_DEVICES += wndr3700 endef TARGET_DEVICES += netgear_wndr3700 define Device/netgear_wndr3700v2 $(Device/netgear_wndr3x00) DEVICE_MODEL := WNDR3700v2 NETGEAR_KERNEL_MAGIC := 0x33373031 NETGEAR_BOARD_ID := WNDR3700v2 NETGEAR_HW_ID := 29763654+16+64 IMAGE_SIZE := 15872k SUPPORTED_DEVICES += wndr3700v2 endef TARGET_DEVICES += netgear_wndr3700v2 define Device/pisen_wmm003n $(Device/tplink-8mlzma) ATH_SOC := ar9331 DEVICE_VENDOR := PISEN DEVICE_MODEL := Cloud Easy Power (WMM003N) DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-chipidea2 TPLINK_HWID := 0x07030101 endef TARGET_DEVICES += pisen_wmm003n define Device/netgear_wndr3800 $(Device/netgear_wndr3x00) DEVICE_MODEL := WNDR3800 NETGEAR_KERNEL_MAGIC := 0x33373031 NETGEAR_BOARD_ID := WNDR3800 NETGEAR_HW_ID := 29763654+16+128 IMAGE_SIZE := 15872k SUPPORTED_DEVICES += wndr3800 endef TARGET_DEVICES += netgear_wndr3800 define Device/phicomm_k2t ATH_SOC := qca9563 DEVICE_VENDOR := Phicomm DEVICE_MODEL := K2T IMAGE_SIZE := 15744k IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE) DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k-ct ath10k-firmware-qca9888-ct endef TARGET_DEVICES += phicomm_k2t define Device/rosinson_wr818 ATH_SOC := qca9563 DEVICE_VENDOR := Rosinson DEVICE_MODEL := WR818 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += rosinson_wr818 define Device/wd_mynet-n750 $(Device/seama) ATH_SOC := ar9344 DEVICE_VENDOR := Western Digital DEVICE_MODEL := My Net N750 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-usb-core kmod-usb2 SEAMA_SIGNATURE := wrgnd13_wd_av SUPPORTED_DEVICES += mynet-n750 endef TARGET_DEVICES += wd_mynet-n750 define Device/wd_mynet-wifi-rangeextender ATH_SOC := ar9344 DEVICE_VENDOR := Western Digital DEVICE_MODEL := My Net Wi-Fi Range Extender DEVICE_PACKAGES := rssileds nvram -swconfig IMAGE_SIZE := 7808k ADDPATTERN_ID := mynet-rext ADDPATTERN_VERSION := 1.00.01 IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | cybertan-trx | \ addpattern | append-metadata SUPPORTED_DEVICES += mynet-rext endef TARGET_DEVICES += wd_mynet-wifi-rangeextender define Device/winchannel_wb2000 ATH_SOC := ar9344 DEVICE_VENDOR := Winchannel DEVICE_MODEL := WB2000 IMAGE_SIZE := 15872k DEVICE_PACKAGES := kmod-i2c-core kmod-i2c-gpio kmod-rtc-ds1307 kmod-usb2 kmod-usb-ledtrig-usbport endef TARGET_DEVICES += winchannel_wb2000 define Device/xiaomi_mi-router-4q ATH_SOC := qca9561 DEVICE_VENDOR := Xiaomi DEVICE_MODEL := Mi Router 4Q IMAGE_SIZE := 14336k endef TARGET_DEVICES += xiaomi_mi-router-4q define Device/yuncore_a770 ATH_SOC := qca9531 DEVICE_VENDOR := YunCore DEVICE_MODEL := A770 DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct IMAGE_SIZE := 16000k endef TARGET_DEVICES += yuncore_a770 define Device/zbtlink_zbt-wd323 ATH_SOC := ar9344 DEVICE_VENDOR := ZBT DEVICE_MODEL := WD323 IMAGE_SIZE := 16000k DEVICE_PACKAGES := kmod-usb2 kmod-i2c-core kmod-i2c-gpio kmod-rtc-pcf8563 \ kmod-usb-serial kmod-usb-serial-cp210x uqmi endef TARGET_DEVICES += zbtlink_zbt-wd323