config defaults
option syn_flood 1
option input ACCEPT
- option output ACCEPT
+ option output ACCEPT
option forward REJECT
+# Uncomment this line to disable ipv6 rules
+# option disable_ipv6 1
config zone
option name lan
- option input ACCEPT
- option output ACCEPT
- option forward REJECT
+ option network 'lan'
+ option input ACCEPT
+ option output ACCEPT
+ option forward REJECT
config zone
option name wan
- option input REJECT
- option output ACCEPT
- option forward REJECT
- option masq 1
- option mtu_fix 1
+ option network 'wan'
+ option input REJECT
+ option output ACCEPT
+ option forward REJECT
+ option masq 1
+ option mtu_fix 1
-config forwarding
- option src lan
- option dest wan
+config forwarding
+ option src lan
+ option dest wan
# We need to accept udp packets on port 68,
# see https://dev.openwrt.org/ticket/4108
config rule
+ option name Allow-DHCP-Renew
option src wan
option proto udp
option dest_port 68
option target ACCEPT
+ option family ipv4
+
+# Allow IPv4 ping
+config rule
+ option name Allow-Ping
+ option src wan
+ option proto icmp
+ option icmp_type echo-request
+ option family ipv4
+ option target ACCEPT
+
+# Allow DHCPv6 replies
+# see https://dev.openwrt.org/ticket/10381
+config rule
+ option name Allow-DHCPv6
+ option src wan
+ option proto udp
+ option src_ip fe80::/10
+ option src_port 547
+ option dest_ip fe80::/10
+ option dest_port 546
+ option family ipv6
+ option target ACCEPT
-#Allow ping
+# Allow essential incoming IPv6 ICMP traffic
config rule
- option src wan
- option proto icmp
- option icmp_type echo-request
- option target ACCEPT
+ option name Allow-ICMPv6-Input
+ option src wan
+ option proto icmp
+ list icmp_type echo-request
+ list icmp_type echo-reply
+ list icmp_type destination-unreachable
+ list icmp_type packet-too-big
+ list icmp_type time-exceeded
+ list icmp_type bad-header
+ list icmp_type unknown-header-type
+ list icmp_type router-solicitation
+ list icmp_type neighbour-solicitation
+ list icmp_type router-advertisement
+ list icmp_type neighbour-advertisement
+ option limit 1000/sec
+ option family ipv6
+ option target ACCEPT
+
+# Allow essential forwarded IPv6 ICMP traffic
+config rule
+ option name Allow-ICMPv6-Forward
+ option src wan
+ option dest *
+ option proto icmp
+ list icmp_type echo-request
+ list icmp_type echo-reply
+ list icmp_type destination-unreachable
+ list icmp_type packet-too-big
+ list icmp_type time-exceeded
+ list icmp_type bad-header
+ list icmp_type unknown-header-type
+ option limit 1000/sec
+ option family ipv6
+ option target ACCEPT
# include a file with users custom iptables rules
config include
# option src_ip 192.168.45.2
# option dest wan
# option proto tcp
-# option target REJECT
+# option target REJECT
# block a specific mac on wan
#config rule
# option dest wan
# option src_mac 00:11:22:33:44:66
-# option target REJECT
+# option target REJECT
# block incoming ICMP traffic on a zone
#config rule
# option src_dport 80
# option dest lan
# option dest_ip 192.168.16.235
-# option dest_port 80
+# option dest_port 80
# option proto tcp
+# port redirect of remapped ssh port (22001) on wan
+#config redirect
+# option src wan
+# option src_dport 22001
+# option dest lan
+# option dest_port 22
+# option proto tcp
+
+# allow IPsec/ESP and ISAKMP passthrough
+#config rule
+# option src wan
+# option dest lan
+# option protocol esp
+# option target ACCEPT
+
+#config rule
+# option src wan
+# option dest lan
+# option src_port 500
+# option dest_port 500
+# option proto udp
+# option target ACCEPT
### FULL CONFIG SECTIONS
#config rule
# option dest_ip 194.25.2.129
# option dest_port 120
# option proto tcp
-# option target REJECT
+# option target REJECT
#config redirect
# option src lan