local board="$1"
case "$board" in
- "etactica,eg200")
- ucidef_set_interface_lan "eth0" "dhcp"
- ;;
- "avm,fritz300e"|\
- "tplink,tl-mr10u"|\
- "tplink,tl-wr703n"|\
- "ubnt,ubnt-unifiac-lite"|\
- "ubnt,unifi")
+ avm,fritz300e|\
+ devolo,dvl1200i|\
+ devolo,dvl1750c|\
+ devolo,dvl1750i|\
+ ocedo,koala|\
+ ocedo,raccoon|\
+ pcs,cap324|\
+ pisen,wmm003n|\
+ pqi,air-pen|\
+ tplink,re350k-v1|\
+ tplink,re450-v2|\
+ tplink,tl-mr10u|\
+ tplink,tl-mr3020-v1|\
+ tplink,tl-mr3040-v2|\
+ tplink,tl-wa901nd-v2|\
+ tplink,tl-wr703n|\
+ ubnt,bullet-m|\
+ ubnt,bullet-m-xw|\
+ ubnt,lap-120|\
+ ubnt,nanostation-ac-loco|\
+ ubnt,rocket-m|\
+ ubnt,unifiac-lite|\
+ ubnt,unifiac-mesh|\
+ ubnt,unifi|\
+ wd,mynet-wifi-rangeextender|\
+ winchannel,wb2000)
ucidef_set_interface_lan "eth0"
;;
-
- "embeddedwireless,dorin")
+ avm,fritz4020|\
+ pcs,cr3000|\
+ tplink,archer-c58-v1|\
+ tplink,archer-c59-v1)
+ ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
- "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
+ "0@eth1" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
;;
-
- "glinet,ar150")
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
- ;;
-
- "glinet,ar300m")
- ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ buffalo,bhr-4grv|\
+ buffalo,wzr-hp-g450h)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
;;
-
- "tplink,tl-mr3020-v1")
- ucidef_set_interface_lan "eth0.1"
- ucidef_add_switch "switch0" "0@eth0" "1:lan"
+ buffalo,bhr-4grv2)
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
;;
- "tplink,tl-wdr3600"|\
- "tplink,tl-wdr4300")
+ buffalo,wzr-hp-ag300h)
+ ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
- "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+ "0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
;;
-
- "tplink,tl-wr740n-v2")
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+ buffalo,wzr-hp-g302h-a1a0)
ucidef_add_switch "switch0" \
- "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+ "0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
;;
-
- "tplink,tl-wr1043nd-v1")
+ devolo,dvl1200e|\
+ devolo,dvl1750e)
+ ucidef_set_interface_lan "eth0 eth1"
+ ;;
+ dlink,dir-825-b1)
+ ucidef_set_interface_wan "eth1"
ucidef_add_switch "switch0" \
- "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+ "0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
;;
- "tplink,tl-wr1043nd-v4")
+ dlink,dir-825-c1|\
+ dlink,dir-835-a1|\
+ dlink,dir-859-a1|\
+ tplink,archer-c2-v3|\
+ tplink,tl-wr1043nd-v4)
ucidef_add_switch "switch0" \
"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
;;
- "tplink,tl-wr1043nd-v2"|\
- "tplink,tl-wr1043nd-v3")
- ucidef_set_interfaces_lan_wan "eth1.1" "eth0.2"
+ elecom,wrc-1750ghbk2-i|\
+ elecom,wrc-300ghbk2-i)
ucidef_add_switch "switch0" \
- "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
+ "0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
;;
- "netgear,wndr3800")
+ embeddedwireless,dorin)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:wan" "2:lan:3" "3:lan:2"
+ ;;
+ engenius,ews511ap)
+ ucidef_set_interface_lan "eth0 eth1" "dhcp"
+ ;;
+ etactica,eg200)
+ ucidef_set_interface_lan "eth0" "dhcp"
+ ;;
+ glinet,gl-ar150|\
+ glinet,gl-ar300m-nand|\
+ glinet,gl-ar300m-nor|\
+ glinet,gl-x750|\
+ tplink,tl-wr810n-v1|\
+ tplink,tl-wr810n-v2|\
+ ubnt,routerstation|\
+ yuncore,a770)
+ ucidef_set_interfaces_lan_wan "eth1" "eth0"
+ ;;
+ glinet,gl-ar750s)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:2" "3:lan:1" "1:wan"
+ ;;
+ iodata,etg3-r|\
+ iodata,wn-ac1167dgr|\
+ iodata,wn-ac1600dgr|\
+ iodata,wn-ac1600dgr2|\
+ iodata,wn-ag300dgr|\
+ pcs,cr5000)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
+ ;;
+ librerouter,librerouter-v1)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "5:wan" "6@eth1" "4:lan"
+ ;;
+ nec,wg800hp)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
+ ;;
+ netgear,wndr3700|\
+ netgear,wndr3700v2|\
+ netgear,wndr3800)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
ucidef_add_switch "switch0" \
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
-
ucidef_add_switch_attr "switch0" "blinkrate" 2
ucidef_add_switch_port_attr "switch0" 1 led 6
ucidef_add_switch_port_attr "switch0" 2 led 9
ucidef_add_switch_port_attr "switch0" 5 led 2
;;
- "buffalo,wzr-hp-g450h")
+ netgear,wnr612-v2|\
+ on,n150r|\
+ tplink,tl-wr841-v7)
+ ucidef_set_interface_wan "eth0"
ucidef_add_switch "switch0" \
- "0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
;;
- "phicomm,k2t")
+ phicomm,k2t)
ucidef_add_switch "switch0" \
"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
;;
+ rosinson,wr818)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "1:lan" "2:lan" "3:wan"
+ ;;
+ tplink,archer-c5-v1|\
+ tplink,archer-c7-v1|\
+ tplink,archer-c7-v2|\
+ tplink,tl-wdr4900-v2)
+ ucidef_add_switch "switch0" \
+ "0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
+ ;;
+ buffalo,whr-g301n|\
+ tplink,tl-mr3220-v1|\
+ tplink,tl-mr3420-v1|\
+ tplink,tl-wr841-v9|\
+ tplink,tl-wr841-v11|\
+ ubnt,airrouter)
+ ucidef_set_interface_wan "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+ ;;
+ tplink,archer-a7-v5|\
+ tplink,archer-c6-v2|\
+ tplink,archer-c7-v4|\
+ tplink,archer-c7-v5|\
+ tplink,tl-wdr3600|\
+ tplink,tl-wdr4300)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
+ ;;
+ tplink,tl-wr1043nd-v1)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
+ ;;
+ tplink,tl-wr1043nd-v2|\
+ tplink,tl-wr1043nd-v3)
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
+ ;;
+ tplink,tl-wr2543-v1)
+ ucidef_add_switch "switch0" \
+ "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
+ ;;
+ tplink,tl-wr740n-v1|\
+ tplink,tl-wr740n-v3|\
+ tplink,tl-wr741-v1|\
+ tplink,tl-wr743nd-v1|\
+ tplink,tl-wr841-v5|\
+ tplink,tl-wr941-v4)
+ ucidef_set_interface_wan "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+ ;;
+ tplink,tl-wr740n-v4|\
+ tplink,tl-wr741nd-v4|\
+ tplink,tl-wr841-v8|\
+ tplink,tl-wr842n-v1|\
+ tplink,tl-wr842n-v2)
+ ucidef_set_interface_wan "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
+ ;;
+ tplink,tl-wr941-v2)
+ ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
+ ;;
+ ubnt,routerstation-pro)
+ ucidef_set_interface_wan "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
+ ;;
+ ubnt,nanostation-m-xw)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "5:lan" "1:wan"
+ ;;
+ ubnt,nanostation-ac|\
+ ubnt,unifiac-mesh-pro|\
+ ubnt,unifiac-pro)
+ ucidef_add_switch "switch0" \
+ "0@eth0" "2:lan" "3:wan"
+ ;;
+ xiaomi,mi-router-4q)
+ ucidef_set_interface_wan "eth0"
+ ucidef_add_switch "switch0" \
+ "0@eth1" "3:lan:1" "4:lan:2"
+ ;;
*)
ucidef_set_interfaces_lan_wan "eth0" "eth1"
;;
avm,fritz300e)
lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
;;
+ avm,fritz4020)
+ lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
+ wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
+ ;;
+ dlink,dir-825-b1)
+ lan_mac=$(mtd_get_mac_text "caldata" 65440)
+ wan_mac=$(mtd_get_mac_text "caldata" 65460)
+ ;;
+ dlink,dir-825-c1|\
+ dlink,dir-835-a1)
+ lan_mac=$(mtd_get_mac_text "mac" 4)
+ wan_mac=$(mtd_get_mac_text "mac" 24)
+ ;;
+ dlink,dir-859-a1)
+ lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
+ wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
+ ;;
+ elecom,wrc-1750ghbk2-i|\
+ elecom,wrc-300ghbk2-i)
+ wan_mac=$(macaddr_add "$(mtd_get_mac_binary ART 4098)" -2)
+ ;;
+ engenius,ews511ap)
+ lan_mac=$(mtd_get_mac_text "u-boot-env" 233)
+ eth1_mac=$(macaddr_add "$lan_mac" 1)
+ ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
+ ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
+ ;;
+ iodata,etg3-r)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(macaddr_add "$lan_mac" -1)
+ ;;
+ iodata,wn-ac1167dgr|\
+ iodata,wn-ac1600dgr|\
+ iodata,wn-ac1600dgr2|\
+ iodata,wn-ag300dgr)
+ lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
+ wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
+ ;;
+ nec,wg800hp)
+ lan_mac=$(mtd_get_mac_text board_data 640)
+ wan_mac=$(mtd_get_mac_text board_data 1152)
+ ;;
+ netgear,wndr3700|\
+ netgear,wndr3700v2|\
+ netgear,wndr3800)
+ lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0)")
+ ;;
phicomm,k2t)
lan_mac=$(k2t_get_mac "lan_mac")
wan_mac=$(k2t_get_mac "wan_mac")
;;
+ rosinson,wr818)
+ wan_mac=$(mtd_get_mac_binary factory 0)
+ lan_mac=$(macaddr_setbit_la "$wan_mac")
+ ;;
+ tplink,archer-c7-v4)
+ base_mac=$(mtd_get_mac_binary config 8)
+ wan_mac=$(macaddr_add "$base_mac" 1)
+ ;;
+ tplink,tl-wr1043nd-v4)
+ base_mac=$(mtd_get_mac_binary product-info 8)
+ wan_mac=$(macaddr_add "$base_mac" 1)
+ ;;
+ tplink,tl-wr941-v2)
+ base_mac=$(mtd_get_mac_binary u-boot 130048)
+ wan_mac=$(macaddr_add "$base_mac" 1)
+ ;;
+ ubnt,routerstation|\
+ ubnt,routerstation-pro)
+ wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
+ lan_mac=$(macaddr_add "$wan_mac" 1)
+ ;;
+ wd,mynet-wifi-rangeextender)
+ lan_mac=$(nvram get et0macaddr)
+ ;;
esac
[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
projects / openwrt / staging / dedeckeh.git / blobdiff